Instruction manual. It doesn t mean the TV is broken with some light or dark colour dots on

Transcription

1 A. CAUTIONS. Never attempt your own maintenance. If something appears strange, please turn the TV off and consult your TV dealer. The TV is composed of many delicate electronic components that can be damaged or broken if you open the TV or attempt to modify it.. Do not exposing the TV to high humidity, dust, steam, oil, smoke, direct sunlight etc. 3. Do not use thinners or other chemical reagent. Wipe the TV off with a soft cloth if it gets dirty. 4. Do not leave the TV in excessively hot or cold places. Permissible storage temperatures are within the range of -5 to +60. Permissible operation temperatures are within the range of 0 to Only use specified adaptors and power sources. 6. Turn power OFF when not in use and unplug the adaptor. 7. Avoid dropping and strong impact. For your safety, the driver should not watch TV or operate the controls while driving. Please note that watching and operating the TV while driving are prohibited by law in some countries., It doesn t mean the TV is broken with some light or dark colour dots on, the LCD, it s an insurmountable condition with the TFT-LCD technology. Instruction manual

2 B. ASPECT () Remote sensor. Main Part () Selecting DTV/ATV/AV source button (3)ANS button (to select Volume, Brightness, Contrast Colour, Tint ) (4) TV complex button (up, down, right, left,ok buttons) (5) TV menu button (6) Power (standby ) ON/OFF button 9 (7) Power indication (8) Speakers 8 (9) LCD screen (0) Antenna () Set stand () Video input socket 7 (3) Left/Right Audio input socket 0 (4) Earphone socket (5) DTV audio video output socket (6) DC power input socket(0~5v) (7) Main power switch (8) Screw hole 8 DTV:DVB-T digital TV ATV: Analogue TV 3

3 5 4. Remote Control. STANDBY to switch the TV on from standby or off to st andb y.. NUMERIC KEYS Used to select channels or enter progr amm ing param eters. 3. LEFT/RIGHT( / ) Move the DTV left or right highlight marke d curs or. Adjust volume. 4. UP/DOWN( / ) Move up or down highlight marked cursor. And turn to the next or previous channel. 5. MENU Displays the Menu on th e sc reen. 6. TV/RADIO Receiver switches between DTV mode and Radio mode. 7. RED/GREEN/YELLOW DTV Function keys in menu. 8. EXIT Use in DTV menu go back to previous menu SOURCE MIRROR 9 9. OK To select DTV menu option, or to display channel list 0. LCD ON/OFF switch the LCD panel ON/OFF ANS LCD ON/OFF. AUDIO To select DTV audio mode: Left, Right, Stereo, language. To select ATV sound system. GUIDE Displays the DTV/Radio Program Guide. 3. MUTE Used to enable or disable the audio. 4. INFO To display the TV channel status or various program information of current service. 5. RECALL Return to the previous menu or switch to the last view Channel. 6. SLEEP TIME To enter sleep time setup. 7. SOURCE To select DTV, ATV, AV, VGA source (Some TV sets without VGA) 8. ANS To select Volume, Brightness, Contrast, Colour, Tint adjusting mode. 9. MIRROR only AV mode use to mirror the picture 4 5

4 C. RF input(ant input).rod Antenna ()Install the rod antenna clockwise rotation (figure ) ()Uninstall the rod antenna anticlockwise movement (figure ) D. POWER SUPPLY AC Household Current: The optional AC adaptor allows the TV to be powered by standard household current (please look over the symbol of the AC adaptor.) Car Battery (DC V): The optional car adaptor (apply to the car with - polarity connected to the ground) allows the TV to be powered by a car battery through the vehicle s cigarette lighter. E. BASIC OPERATION Turning on power () () Slide the MAIN POWER Located on the back side of the main unit..use the Antenna adapter (IEC to F-type connect) to connect outdoor Antenna ()Install the antenna adapter clockwise rotation (figure ) ()Uninstall the antenna adapter anticlockwise movement (figure ) Selecting DTV/AV/ATV source )Turn on the power of the connected video equipment. )Press the SOURCE button to select the applicable input source.the screen displays DTV/ AV/ATV mode at the upper left corner each time SOURCE is pressed. ON-screen display DTV mode DTV AV mode AV () () NOTE: If there is not signal, the screen will display :"NO SIGNAL" ATV mode ATV 6 7

5 Sound volume ).PressANS to select volume. ).press the RIGHT ( ) button to increase sound volume adjusting. The segment of indicator increases ).Press the LEFT ( )button decrease sound volume. The segment of indicator decreases To mute sound ).Press the MUTE button to temporarily turn off the sound. Screen display the mute mark. ).Press the MUTE or LEFT/RIGHT( / )button to turn the sound back to the previous level. Adjusting the picture setting ).Press the ANS button to select brightness contrast, colour, tint (tint only NTSC system using) ).Press LEFT/RIGHT( / )button to adjust the brightness, contrast, colour, tint. ).Press LEFT/RIGHT( / )button to adjust the brightness. 4).Press LEFT/RIGHT( / ) button to adjust the colour ).Press LEFT/RIGHT ( / ) button to adjust the tint (tint only NTSC system using ) Changing the channels )Changing channels using the numeric buttons,you can select a one-digit channel or two-digit channel. Press one or two Digit buttons. ATV allow you to select up to 00 Positions(channel 0 to 99) )Changing channels with the UP/DOWN( / ) button to one by one to select channels. Function selection )At ATV/AV mode press menu button to select FUNCTION menu, Press the UP/DOWN( / ) button to select the function, Press the LEFT/RIGHT( / ) button to transfer the function items, The screen displays LANGUAGE NORMAL FUCTION ENGLISH ASPECT 6: ).Press LEFT/RIGHT( / )button to adjust the contrast LANGUAGE: Press the UP / DOWN ( / )button to select the language.press the LEFT / RIGHT( / ) button to change the language Picture up and down: Press the UP / DOWN( / ) button to select. Press the LEFT / RIGHT( / ) button to turn the picture up and down. ASPECT MODE: Press the UP / DOWN( / ) button to select ASPECT. Press the LEFT / RIGHT( / ) button to turn the 6:9 or 4:3 picture. 8 9

6 F. PRESET ATV Presetting the channels(auto search). Press the MENU button, the PRESET menu screen appears.. Press the UP/DOWN( / ) button to select AUTO SEARCH item. 3. Press the LEFT/RIGHT( / ) button,all the TV stations in your area that can be received by the LCD TV set are automatically preset between channels 0 to The screen shows whatever is on channel when full auto channel preset is finished. Channel Setting. Press the MENU button, the PRESET menu screen appears.. Press the UP/DOWN( / ) button to select the desired function mode. 3. Each time you press the LEFT/RIGHT( / ) button,the setting for individual item is change as follows: Colour System The mode changes in the following order AUTO PAL NTSC SECAM PRESET CHANNEL COLOUR SYSTEM SOUND SYSTEM AUTO SEARCH MANUAL SEARCH FINE TUNE BAND SKIP THIS AUTO BG 00.5MHZ VHFH NO Sound System The mode changes in the following order BG DK I M L Notes:.When starting the Auto searching after setting, The colour system and sound system for all channel are stored into memory..unused channels are automatically skipped. Presetting the channels(manual Search). Press the MENU button, the PRESET menu screen appears.. Press the UP/DOWN( / ) button to select CHANNEL item. 3. Press the LEFT/RIGHT( / ) button to locate the channel you want to preset to the position. 4. Press the UP/DOWN( / ) button to select MANUAL SEARCH item. 5. Press the LEFT/RIGHT( / ) button search is initiated and when a ATV signal is received during the search.the search stops. 6. Repeat step above to preset the channel position for other broadcasts etc. 0 Press the remote control AUDIO to change the ATV sound system Channels Skip The mode changes in the following order SKIP THIS YES NO Fine tune The frequency changes to allow fine tuning. BAND: changes Band VHFL VHFH UHF

7 G. PRESET DTV MENU: When power on, [First Installation] will be shown on the screen if unit without any channel stored First Installation Area OSD Language Time zone Antenna Auto Scan UK English GMT + 5V off OK Installation Antenna Active System Setup Press, to select first Installation, then press OK button. Area : Press, to select the appropriate area. OSD Language : Press, to select to your preference language. Time zone : Press, to select time zone. Antenna : Press, to selet 5V on or 5V off so that the tuner will, or won t provide 5V power supply. Auto Scan : Press OK and begin to auto san., If you don t want to do the first installations, please press the EXIT button to exit. Press the [MENU] button when the TV is DTV mode, then the Preset program setting menu will be shown on the screen. Main Menu (A). Antenna Active Press,, or button to select Antenna Active,Then press OK button. Press or button to select Enable or Disable. Antenna Active Antenna Press OK Enable 5V If you select "enable ",the tuner can provide 5V power supply. On Key to select Exit: Back (B). System Setup Press,, or button to select System Setup,Then press OK button. 3 Installation Channel Search Channel Edit Press OK Key to select Press,, or to select your desired recommend function. Press [EXIT] button to return the upon interface. Press [MENU] button to exit the menu interface.. Installation Press,, or button to select Installation,Then press OK button. System Setup Local Time User Interface Video System Information Factory Reset

8 Local Time Press,, or button to select Local Time,Then press OK button. Press or button to select Time zone or Summer time item,then press or button to set it. Local Time Time zone Summer time Date Month Year Time Press OK GMT+ On :06 Key to select Exit:Back User Interface Press,, or button to select User Interface,Then press OK button. Press or button to select Language or Transparency item, Then press or button to change the language. User Interface OSD Language OSD Transparency English 35% System Information Press,, or button to select System Information,Then press OK button. You can see the receiver Hardware and Software update details. System Setup Local Time System Information User Interface NEC upd60 S/W Version: upd60 V3.0 Video h/w Version: 3.0 Last Update: System Information Factory Reset Factory Reset Press,, or button to select Factory Reset,Then press OK button. System Setup Local Time All Date are Erasing UserInterface Are you sure? Yes No Video System Information Factory Reset Press OK OSD Language: Control the language as to you preference. OSD Transparency: Customise the OSD transparency. Video Press,, or button to select Video,Then press OK button. Press or button to select TV System, Screen Ratio or 4:3 Handing, Then press or button to set it. Video TV System Screen Ratio 4:3 Handing Key to select Exit:Back PAL 6:9 Pan&Scan Press or button to select Yes or No, then press OK button. Note: this action will erase all the date you have store in the receiver,be sure that you want to perform this function before you proceed.. Channel Search Press,, or button to select Channel Search,Then press OK button. Channel Search Area Frequeny Band Width Mode Scan Mode Scan Mode Australia CH[4]57.5MHZ Auto Manual Scan Level 5% Quality 7MHZ Auto Scan 0% Press key to select PAL/SECAM/NTSC 4 Pross LEFT/BIGHT key to Soloct Froquency. 5

9 Press the, to select Area, then Press left/right to select the appropriate area. Press or button to select Frequency,Then press OK button. Press or button to select desired recommend Frequency. (A). Preset TV Channel This menu enable you to setup the channel of DVB-T. Such as move channels, make your own favorite channels list,skip channels and delete channels from the list. Channel Search Frequency Band Width Mode Scan Mode Scan Mode CH[4]57.5MHz CH[45]666MHz CH[5]64.5MHz 8MHz CH[6]77.5MHz CH[7]84.5MHz Auto CH[8]9.5MHz CH[9]98.5MHz Manual Scan CH[0]05.5MHz CH[].5MHz Auto Scan Level 5% Quality TP List 0% Select Frequency,OK: CH table Add To Fav Channel Channel Channel 3 Channel 4 : Delete Edit : Move Edit BW[8MHz] CH Press or button to select the Auto scan, then press OK button to search program with auto search format. It would search all the currently TV program and store them automatically. If you want to stop the AUTO SEARCH mode, please press the [EXIT] button. Note: You may be wait for a moment when the TV finished AUTO SEARCH. You may be wait for a moment when the TV be stopped AUTO SEARCH. 3. CHANNEL EDIT Please select Channel Edit, then press OK button. Channel Edit TV Channel RADIO Channel Press [ 0 ] button to select Skip Edit item. then press or button to select channel, press [OK]button, will display beside the program, press [OK] button again to remove this logo, when you press or button in no-menu state,the program will skip. Skip Channel Channel Channel Channel 3 Channel 4 : Delete Edit : Move Edit BW[8MHz] CH Press [ ] button to select Delete Edit item. then press or button to select channel, press [OK] button you can delete the channels. 6 7

10 Delete Channel Channel Channel Channel 4 : Delete Edit : Move Edit BW[8MHz] CH Press [ 4 ] button to select Sort Edit. then press or button to select channel, Press,,3,4,or 5 button you can sort the channels. Sort Edit Sort Channel by Channel name Sort Channel by Internal list Sort Channel by Lock Sort Channel by Scramble 5 5--Sort by Factory default : Delete Edit : Move Edit BW[8MHz] CH Press [ ] button to select Move Edit item. then press or button to select channel, press [OK] button, press or button to the place you want and press [OK] button,the program move to the currently place. Press,, or button to select TV Channel,Then press OK button. Move Index Channel Channel Channel 4 BW[8MHz] CH Add To Fav Channel Channel Channel 3 Channel 4 BW[8MHz] CH : Delete Edit : Move Edit : Delete Edit : Move Edit Press [ 3 ] button to select Name Edit. then press or button to select channel, press [OK] button,a keyboard is shown, press,, or to select a letter, and the [OK] button to overwrite the current by anther letter, press [OK] button to confirm the change name when your have finished. Name edit Channel Channel Channel 4 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z DEL Other Space BW[8MHz] Save CH Press [5] button to select Fav list, then press or button to select channel. Press OK button you can set the channels to favor list. (B). Preset RADIO Channel Press,, or button to select RADIO Channel,Then press OK button. Add To Fav- 000 BBC PARLMNT BW[8MHz] CH : Delete Edit : Move Edit : Delete Edit : Move Edit It's the same as "Preset TV Channel". 8 9

11 H. Basic function While viewing TV or Radio channel various function can be applied using your remote control. Info press [INFO] button to show you the information of the current channel. OK Level 0% Quality 0% P press [OK] button to display the channel list of TV, Radio channel directly. It's convenient for your selecting :5 / F T E Channel [CH] 03 Prog Channel Channel Channel 3 Channel 4 GUIDE (EPG) Your DTV has an Electronic Program Guide(EPG) to you navigate programs through all the possible viewing options. This receiver is equipped with a unique dual EPG system which gives you easy way to view the program information. The DTV Guide supplies information such as program listings and starting and ending times for all available programs. Press the GUIDE key while you are viewing a program and the Program Guide screen will be displayed. Navigate event: Press the Left Right key, you can navigate the event information in four days. Change channel: Press the Up Down key,you can change the viewing channel. Change fav list: Press the red key,you can select which favorite type channel should be listed. Reserve: Press the Yellow key,you can reserve the event you want. NOTICE: This service is not offered by all channels. Program information will be available only when it is included in the transmission. Audio press [AUDIO] button to show the list of available audio language for the channel you are watching, you can change the audio language you want to hear by press the or button, and press [OK] button to confirm. eng / Stereo 0 Teletext and subtitle You can start the teletext and subtitle with the yellow button of the remote control and confirm the appearing window with the ''OK'' button.you exit the teletext and subtitle by using ''EXIT'' button. Depending on the receiving quality the page searching can last up to half a minute until the start side 00 is displayed. At the bottom of the text page links to other pages are displayed with the colours red, green, yellow and blue. The red, green,yellow button can be used for these links. The "TV/RADIO" button complies with the blue button. You can also navigate with the up And the down button and with the 0 9 buttons.

12 K. TROUBLESHOOTING button to go back to TV. You can see the actual page number on the left side and the requested page number on the right side at the top of the teletext page. The page searching is displayed on the left side. Teletext is only available when receiving DVBT channels. NOTICE: This service is not offered by all channels. Teletext and subtitle information will be available only when it is included in the transmission. OTHER Sound track In digital broadcasts, multiple audio languages can be simultaneously transmitted by the program provider. The Audio control menu appears when the Audio key is pressed on the channel having different types of sounds. You can change the desired audio language and audio mode of current service. I. ADJUSTING THE SLEEP TIMER SETTINGS. Press the SLEEP key to display the sleep time screen.. Press the LEFT/RIGHT( / ) to set the sleep time (in minutes). The setting can be set in minutes J. LISTENING WITH A EARPHONE Plug the earphone mini-plug into the earphone jack located on the rear side of the set. Earphone Before calling for repair service,cheak the following items for possible remedies to the encoutered symptoms. TV set Problem There is no picture or sound. There is no picture. There is no sound. There is no picture or sound,just noise. picture is not clear. picture is light or improperly tinted. The picture is too dark. Check item Make sure the AC adapter is properly inserted in the power outlet. Reception other than those of broadcasting stations can be considered. Make sure the input mode is set to TV. Make sure the main power switch of the main unit is on. Make sure the colour system is right Fluorescent lamp may have reached the end of service life. Make sure the sound system is right Make sure the volume is not set to minimum. Make sure the sound is not set to mute. Make sure the headphone is not connected. Make sure the antenna cable is properly connected. Bad reception can be considered. Make sure the antenna cable is properly connected. Bad reception can be considered. Check colour adjustment.(ntsc mode) Check Contrast and Brightness adjustment. Fluorescent lamp may have reached the end of service life. Notes: No sound will be heard from the main unit speakers when connecting the earphone set. Remote control does not work. Check to see if batteries in the remote control have sufficient power. Make sure the remote sensor window is not under strong fluorescent lighting. 3

13 TROUBLESHOOTING(Continued) Antenna Problem The picture is not sharp The picture moves The picture is doubled or tripled The picture is spotted There are stripes on the screen or colours fade Check item The reception may be weak. The state of the broadcast may also be bad. Make sure the antenna is facing the right direction. Make sure the outside antenna is not disconnected. Make sure the antenna is facing the right direction. There may be reflected electric waves from mountains or buildings. There may be interference from automobiles,trains,high voltage lines,neon lights,etc. There may be interference between the antenna cable and power cable.try positioning them further apart. Is the unit receiving interference from other devices? Thansmission antennas of radio broadcasting stations and transmission antennas of amateur radios and cellular phones may also cause interference. Use the unit as far apart as possible from devices that may cause possible interference. L. SPECIFICATIONS LCD COLOUR TV COMPARISON ITEMS LCD panel Number of pixels Video colour systems TV sound systems ATV TV Turning System FUNCTION AUTO PRESET CATV Demodulation method Audio type Audio sampling rate Audio.Video.Output Luminance Lamp life Viewing angles Audio amplifier Speakers Video input Left Right Audio input Terminals ANT input DTV AV output Earphone output Power supply Weight Accessories MODEL Slo T (9) TFT LCD 480 x RGB x 34 PAL/NTSC/SECAM I/DK/BG/M/L Auto preset 99ch. Yes ~Hyper Band Standard DVB-T Transport stream Profile&level Input frequency ISO/IEC 388 MPEG- MP@ML VHF,UHF DTV FUNCTION COFDM spectrum Guard interval k and 8k mode /3,/6,/8,and/4 QPSK,6QAM,64QAM Single channel,dual channel, joint stereo,sereo 3,44.and 48KHz AV output 50 cd/m 0,000 Hours 0 0 H:0 V:00 0.5W x x 4 cm, PCS RCA RCAx F-type female 3.5 mm jack(rear) 3.5 mm jack(rear) DC 0-5 V,AC 0-40 V 0.8 Kg w/o accessories Remote control, Antenna, AC adapter, AV cable, IEC to F-type connector. Car adapter, Earphone, Batteries Box 4 5

14 Notice: This manual is only for you reference, any change to the design and specifications will not be advised.