THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
|
|
|
- Damon Robinson
- 5 years ago
- Views:
Transcription
1 PRODUCT BRIEF 10/100/1000BASE-T to Fiber Optic Ethernet (1000BASE-SX, 1000BASE-LX10, 1000BASE-EX, 100BASE-FX), 28VDC, M38999 (Signal), M38999 (Power), M38999 (Fiber Optic) REV DESCRIPTION DATE APPROVED B Per DCN /07/2014 MF C Per DCN /27/2014 MF D Per DCN /23/2015 MF E Per DCN /17/2015 MF F Per DCN /22/2015 MF G Per DCN /08/2015 MF H Per DCN /07/2016 MF I Per DCN /23/2016 RAS J Per DCN64256; Add Flow Control option 03/10/2017 RAS/GC K Per DCN64961; added Z1 plating 05/02/2017 RAS L Per DCN65333; Update Copyright date 05/26/2017 GC M Per DCN71143; Remove incorrect receptacle connector part number references 06/26/2018 GC N Per DCN71379; Updated solder type in material table. 07/11/2018 DJM BF12U THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.
2 10/100/1000BASE-T to 1000BASE-SX, 1000BASE-LX10, or 100BASE-FX The Glenair is an Ethernet Copper to Fiber media converter that supports 10/100/1000BASE-T copper input/output and can be configured to support 1000BASE-SX, 1000BASE-LX10, 1000BASE-EX or 100BASE-FX protocols. It is designed for harsh environments and incorporates electronics in an environmentally sealed enclosure that incorporates three environmental M38999 connectors. The Glenair Ethernet media converter enables reliable communications over longer distances in harsh environment applications. It extends network link distances between switches, routers, and other Ethernet peripherals. It converts 10/100/1000BASE-T data from twisted pair copper cable to 1000BASE- SX/LX serial data transmitted over a pair of optical fibers. This allows legacy equipment running at 10/100/1000BASE-T to be connected to newer networks, and provides a smooth upgrade path. KEY FEATURES/BENEFITS 1310nm FP Lasers for 1000BASE-LX nm DFB Lasers for 1000BASE-EX InGaAs PIN PD for 1000BASE-LX10 & -EX 850nm Lasers for 1000BASE-SX GaAs PIN PD for 1000BASE-SX 1300nm LED for 100BASE-FX PIN PD for100base-fx Wide Input Voltage Range: 18-36V Electrical Interface compliant with IEEE (10/100/1000BASE-T) Optical Interface compliant with IEEE (1000BASE-LX10 or 1000BASE-SX) Option to implement Flow Control -40 C to +85 C operating temperature range MIL-STD-810 Mechanical Shock and Vibration Up to 550 Meters over MMF (SX) Up to 10km over SMF (LX10) Up to 40km over SMF (EX) Magnetics on the electrical signal input side to support 10/100/1000BASE-T operation over 100m Cat 5E IP67 in mated condition M38999 Rugged connectors for Signal, Power & Fiber Panel Mount & Flange Mount Options APPLICATIONS Harsh Environment such as: Airborne, Tactical, Railway, Industrial, Oil and Gas and Shipboard applications PAGE 2 of 14 sales@glenair.com
3 Functional Block Diagram Figure 1 SINGLE CHANNEL MEDIA CONVERTER Note: Fiber Optic Channels can be 1000BASE-LX10, 1000BASE-SX, 1000BASE-EX or 100BASE-FX Other Fiber Optic connections are possible Contact Factory Flow Control Ethernet flow control is a mechanism for temporarily stopping the transmission of data on Ethernet computer networks. If data flow between the two devices connected to the media converter will vary in rate, it is up to the end user to ensure their higher speed devices are throttled correctly to ensure loss of data does not occur over time. Flow control can be enabled at the factory if so desired. Contact the factory for more details. PAGE 3 of 14 sales@glenair.com
4 Connectors NAME Insert Arrangement Function Media Converter Connector Mating PLUG Connector J1 Fiber Optic Signal Connector D38999 Series III type, D38999 Series III type # PN (D38999/26WF11PN type) PIN TERMINUS D38999 Series III MIL-STD-1560 Arrangement (Mating face - PIN insert shown) SX or FX CONFIGURATION: (M29504/4-4210) LX10 or EX CONFIGURATION: (M29504/4-4208) J2 Power Connector D38999 Series III type, 9-35 D38999 Series III type G6#09-35SN (D38999/26WA35SN) D38999 Series III MIL-STD-1560 Arrangement 9-35 (Mating face - PIN insert shown) SOCKET CONTACTS (M39029/56-348) J3 Electrical Ethernet Signal Connector D38999 Series III type, D38999 Series III type G6#11-35SN (D38999/26WB35SN) D38999 Series III MIL-STD-1560 Arrangement (Mating face - PIN insert shown) SOCKET CONTACTS (M39029/56-348) Note: # = Environmental Class (Material/Finish) PAGE 4 of 14 sales@glenair.com
5 Ratings and Specifications LX10 VERSION ABSOLUTE MAXIMUM RATINGS Storage Temperature Ts C Supply Voltage Vcc V OPERATING CONDITIONS Operating Temperature Top C Supply Voltage Vcc V Supply Current Icc OPTICAL CHARACTERISTICS TRANSMITTER Optical Output Power POUT dbm 1310nm Fabry-Perot Optical Wavelength λout nm Spectral Width Δλ 2.75 nm OPTICAL CHARACTERISTICS RECEIVER Optical Sensitivity ( Input Power Range) PIN_OP dbm Min. Sensitivity, BER 10-12, PRBS PIN_MIN dbm PIN PD, LX10 source Overload, BER 10-12, PRBS PIN_MAX -1 dbm Optical Wavelength λin nm ETHERNET COMPLIANCE Parameter Medium Type Distance Notes Gigabit Ethernet, IEEE 802.3ab, 1000BASE-T Gigabit Ethernet, IEEE 802.3z, 1000BASE-LX10 TIA/EIA-568-B Cat 5E Single Mode Fiber (9/125µm) 100m 10km PAGE 5 of 14 sales@glenair.com
6 Ratings and Specifications EX VERSION ABSOLUTE MAXIMUM RATINGS Storage Temperature Ts C Supply Voltage Vcc V OPERATING CONDITIONS Operating Temperature Top C Supply Voltage Vcc V Supply Current Icc OPTICAL CHARACTERISTICS TRANSMITTER Optical Output Power POUT dbm 1310nm DFB Optical Wavelength λout nm Spectral Width Δλ 1 nm OPTICAL CHARACTERISTICS RECEIVER Optical Sensitivity ( Input Power Range) PIN_OP dbm Min. Sensitivity, BER 10-12, PRBS PIN_MIN dbm PIN PD Overload, BER 10-12, PRBS PIN_MAX -1 dbm Optical Wavelength λin nm ETHERNET COMPLIANCE Parameter Medium Type Distance Notes Gigabit Ethernet, IEEE 802.3ab, 1000BASE-T Derived from Gigabit Ethernet, IEEE 802.3z TIA/EIA-568-B Cat 5E Single Mode Fiber (9/125µm) 100m 40km** ** 19dB optical Loss budget, 0.35dB/km loss assumed PAGE 6 of 14 sales@glenair.com
7 Ratings and Specifications SX VERSION ABSOLUTE MAXIMUM RATINGS Storage Temperature Ts C Supply Voltage Vcc V 1 second maximum OPERATING CONDITIONS Operating Temperature Top C Supply Voltage Vcc V Supply Current Icc OPTICAL CHARACTERISTICS TRANSMITTER Optical Output Power POUT -7-1 dbm VCSEL, 50/125µm MM Optical Wavelength λout nm Spectral Width Δλ 0.85 nm OPTICAL CHARACTERISTICS - RECEIVER Optical Sensitivity (Input Power Range) PIN_OP dbm Min. Sensitivity, BER 10-12, PRBS PIN_MIN dbm PIN PD, 50/125µm MM Overload, BER 10-12, PRBS PIN_MAX -2-1 dbm Optical Wavelength λ IN nm ETHERNET COMPLIANCE Parameter Medium Type Distance Notes Gigabit Ethernet, IEEE 802.3ab, TIA/EIA-568-B Cat 5E 100m 1000BASE-T Gigabit Ethernet, IEEE 802.3z, OM3 MMF (50/125µm) 550m 850nm VCSEL 1000BASE-SX OM1 MMF (62.5/125µm) 275m PAGE 7 of 14 sales@glenair.com
8 Ratings and Specifications FX VERSION ABSOLUTE MAXIMUM RATINGS Storage Temperature Ts C Supply Voltage Vcc V 1 second maximum OPERATING CONDITIONS Operating Temperature Top C Supply Voltage Vcc V Supply Current Icc OPTICAL CHARACTERISTICS TRANSMITTER Optical Output Power POUT dbm 1300nm LED (IEC ) Optical Wavelength λout nm Spectral Width Δλ 147 nm OPTICAL CHARACTERISTICS - RECEIVER Sensitivity, BER 10-10, PRBS PIN -32 dbm PIN PD Overload, BER 10-10, PRBS PIN -14 dbm Optical Wavelength λ IN nm ETHERNET COMPLIANCE Parameter Medium Type Distance Notes Fast Ethernet, IEEE 802.3u, 100BASE-T Fast Ethernet, IEEE 802.3u, 100BASE-FX, IEC TIA/EIA-568-B Cat 5E MMF (50/125µm) & (62.5/125µm) 100m 2km PAGE 8 of 14 sales@glenair.com
9 Ratings and Specifications - (continued) COMPLIANCE SPECIFICATIONS CHARACTERISTIC Standard Condition Notes Mechanical Shock MIL-STD-810G 40g 6-9 ms pulses Mechanical Vibration MIL-STD-810G 30 grms ESD MIL-STD-883 Class II 2200V HBM Conducted Emissions, Power Leads, 30 Hz to 10 khz MIL-STD-461F CE101 Conducted Emissions, Power Leads, 10 khz to 10 MHz MIL-STD-461F CE102 Conducted Susceptibility, Power Leads, 30 Hz to 150KHz MIL-STD-461F CS101 Conducted Susceptibility, Transients, Power Leads MIL-STD-461F CS106 Conducted Susceptibility, Structure Current, 60 Hz to 100 khz MIL-STD-461F CS109 Conducted Susceptibility, Bulk Cable Injection, 10 khz to 200 MHz MIL-STD-461F CS114 Radiated Susceptibility, Magnetic Field, 30 Hz to 100 khz MIL-STD-461F RS101 Radiated Susceptibility, Electric Field, 2 MHz to 18 GHz MIL-STD-461F RS103 Radiated Emissions, Magnetic Field, 30 Hz to 100 khz MIL-STD-461F RE101 Radiated Emissions, Electric Field, 10 khz to 18 GHz MIL-STD-461F RE102 Mating Durability MIL-DTL-38999/ Cycles Flame Resistance EIA seconds Damp Heat MIL-STD-810G 120 hours Aircraft Electrical Power Characteristics MIL-STD-704F 28V DC Systems Military Vehicle Electrical Power Characteristics MIL-STD-1275 Eye Safety CDRH and IEC-825 Class 1 Laser Product 28V DC Systems PAGE 9 of 14 sales@glenair.com
10 Ratings and Specifications - (continued) Material/Finish Item Housing & Connector Shell Plating Finish: M Plating Finish: MT Plating Finish: NF Contacts D38999 Inserts Interfacial Seals, only Optical Ferrules & Sleeves Insulators Contact retention clip Seal, O-rings Seal Spring PC tail contacts PCB flex Encapsulant Solder type Material/Finish Material/Finish Aluminum Nickel Nickel PTFE Olive Drab Cadmium Copper alloy, 50 μinch gold plated Thermoplastics Elastomer, Fluorosilicon Zirconia, Ceramic Liquid crystal polymer (LCP) Beryllium copper alloy Fluorosilicone rubber Silicone elastomer Nickel-plated beryllium copper Copper alloy/gold plated FR4 & Polyimide HYSOL Sn60/Pb40 & Sn63/Pb37 PAGE 10 of 14 sales@glenair.com
11 OUTLINE DRAWING -01 (PANEL MOUNT) Dimensional Tolerances Unless specified otherwise: 0.x ± xx ± xxx ± Marking Assembly is identified with Manufacture s Name, Cage Code, Part Number, Date Code and Serial Number in approximate location shown PAGE 11 of 14 sales@glenair.com
12 OUTLINE DRAWING (Continued) -02 (FLANGE MOUNT) Dimensional Tolerances Unless specified otherwise: 0.x ± xx ± xxx ± Marking: Assembly is identified with Manufacture s Name, Cage Code, Part Number, Date Code and Serial Number in approximate location shown Weight: Mechanical Configuration Weight (lbs) -01 (Panel Mount) nominal -02 (Flange Mount) nominal Connectors will be covered with protective caps at time of shipment Please contact Glenair for other configurations PAGE 12 of 14 sales@glenair.com
13 PANEL CUT OUT RECOMMENDED PANEL CUT OUT J1 PAGE 13 of 14
14 PANEL CUT OUT (Continued) RECOMMENDED PANEL CUT OUT FLANGE MOUNT PAGE 14 of 14
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
050-113 PRODUCT BRIEF Media Converter, Dual or Single Channel, Panel Mount 10/100/1000BASE-T to Fiber Optic Ethernet (1000BASE-SX, 1000 BASE-LX10 or 100BASE-FX), 28VDC, M38999 (Signal & Power), M38999
PRODUCT BRIEF Media Converter Assembly 10/100/1000BASE-T to 100BASE-FX or 1000BASE-SX/LX/EX, Mighty Mouse Connectors 28VDC or USB Bus Power
050-129 PRODUCT BRIEF Media Converter Assembly 10/100/1000BASE-T to 100BASE-FX or 1000BASE-SX/LX/EX, Mighty Mouse Connectors 28VDC or USB Bus Power REV DESCRIPTION DATE APPROVED 3 Preliminary 07/28/2016
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
050-112 PRODUCT BRIEF Media Converter, Dual or Single Channel, Panel Mount 10/100/1000BASE-T to Fiber Optic Ethernet (1000BASE-SX/LX10 or 100BASE-FX), 28VDC, M38999 (Signal & Power), GFOCA (Fiber Optic)
PRODUCT BRIEF Copper to Fiber Media Converter 4-Channel SMPTE HD/3G-SDI
050-207 PRODUCT BRIEF Copper to Fiber REV DESCRIPTION DATE APPROVED 4 Preliminary 2/14/2016 MF 5 Updated Mechanical Drawing, Corrected J1 Channel names 03/31/16 TC/MF/RAS 6 Add ECCN and BID File information
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
050-301 PRODUCT BRIEF SIZE 8 ELECTRO-OPTICAL CONTACT TRANSMITTER OR RECEIVER MULTI-MODE, 1.25MM FERRULE ARINC 801 REV DESCRIPTION DATE APPROVED A Released 09/10/2012 JDO B Revised per DCN 44316 09/10/2012
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
050-307 PRODUCT BRIEF SIZE 8 ELECTRO-OPTICAL CONTACT TRANSMITTER OR RECEIVER MULTI-MODE, 2.5MM TERIMINUS ELIO REV DESCRIPTION DATE APPROVED 2 Preliminary 07/06/2016 MF/RAS/GC 4 Rev up to 4. No change to
Mustang Series Fast Ethernet, TFOCA II, 100Base- TX / FX Media Converter, Multimode, 1310nM, USB Powered - 5.0VDC
Mustang Series Fast Ethernet, TFOCA II, 100Base- TX / FX Media Converter, Multimode, 1310nM, USB Powered - 5.0VDC Single Port, Jam Nut, USB Powered FEATURES Compliant with IEEE-802.3:2005 Fast Ethernet
Fibre Optic Modem ODW-611
Fibre Optic Modem ODW-611 PROFIBUS DP to fibre optic link, point-to-point applications The ODW-611 is a fibre optic modem designed for point-to-point fibre optic connections between PROFI- BUS DP networks.
ODW-621. RS-232 Point-to-point applications
Re-timing Data rate up to 250 kbit/s 9-position D-sub connector Redundant power supply inputs Status interface for fault indication Fibre link fault indication (Red) Design for harsh environments 40 to
LONWORKS Fibre Optic Converter
LONWORKS Fiber Optic Converter LRW-102 and LRW-102/PP LONWORKS to fibre optic link, multidrop and redundant ring applications The LRW-102 is a fibre optic modem designed for multidrop and redundant ring
Fibre Optic Modem ODW-622
Fibre Optic Modem ODW-622 RS-232 to fibre optic link, redundant ring or multidrop applications The ODW-622 can be used to create either redundant ring or multidrop solutions for devices with RS-232 interfaces.
LONWORKS Fibre Optic Router
LONWORKS Fiber Optic Router LRW-112 and LRW-112/PP LONWORKS to fibre optic link, multidrop and redundant ring applications The LRW-112 router offers an easy way to extend the distance between LONWORKS
Dual Fiber SFP Series
SFP-LX, ELX and EX series SFP Single-Mode, Dual Fiber Transceiver for 1.25Gbps FC/GBE Features Operating Data Rate up to 1.25Gbps 10km with 9/125 µm SMF 20km with 9/125 µm SMF 40Km with 9/125 µm SMF Compliant
Fibre optic router for TP/FT-10 LRW-112PP
Fibre optic router for TP/FT-10 LRW-112PP Lo n Wo r k s to fibre optic link, point-to-point applications The LRW-112PP router offers an easy way to extend the distance between LONWORKS 78 kbit/s TP/FT
SERIES BNC 50, COAXIAL MINIATURE CONNECTORS
SERIES BNC 50, COAXIAL MINIATURE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER BNC is still one of the most popular connector series, featuring a two stud bayonet coupling mechanism, which is particularly
8D with High Frequency Coaxial Contact
8D Series M Coaxial Contacts 8D with High Frequency Coaxial Contact robust and powerfull coaxial High Frequency transmission (M) now available in any size 8 SOURIU insert of D38999 Series III. Spring HF
SEL-3405 High-Accuracy IRIG-B Fiber-Optic Transceiver
SEL-3405 High-Accuracy IRIG-B Fiber-Optic Transceiver Accurate IRIG-B Over Fiber Optics Major Features and Benefits The SEL-3405 High-Accuracy IRIG-B Fiber-Optic Transceiver can send high-accuracy demodulated
Single Fiber SFP Series
SFPS-MR4-MX-3155 and 5531 series SFP Multi-Mode, Single-Fiber Transceiver for 100Mbps to 4.25Gbps FE/GBE /FC Features Up to 4.25Gbps Data Links A type: 1310nm FP TX /1550nm RX B type: 1550nm FP TX /1310nm
SFCxxB24GExD SFP Dual Fibre CWDM CWDM / 24dB / Gigabit Ethernet
SFCxxB24GExD SFP Dual Fibre CWDM CWDM / 24dB / Gigabit Ethernet For your product safety, please read the following information carefully before any manipulation of the transceiver: ESD This transceiver
SECTION 4 TABLE OF CONTENTS
Contents Introduction LC, SC and ST Series...4-2 Markets and Applications...4-2 International Standard Documents Compliance...4-2 LC Series Features and Benefits...4-3 LC Standard... 4-4 to 4-5 LC for
SFCxxB16GExD SFP Dual Fibre CWDM ITU CWDM / 16dB / Gigabit Ethernet
SFCxxB16GExD SFP Dual Fibre CWDM ITU CWDM / 16dB / Gigabit Ethernet For your product safety, please read the following information carefully before any manipulation of the transceiver: ESD This transceiver
PSI-MOS-RS232/FO 850 E Serial to Fiber Converter
PSI-MOS-RS232/FO 850 E Serial to Fiber Converter perle.com/products/serial-fiber-converters/psi-mos-rs232-fo850e-rs232-to-fiber.shtml Connect RS232 devices to fiber optic cable Extend serial data up to
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES SGRF300 SGRF300D SGRF300DD SGRF303 SGRF303D SGRF303DD RELAY TYPE Repeatable, RF relay Repeatable, RF relay with internal diode for coil
SPCxxB10100D SFP+ Dual Fiber CWDM CWDM / 10dB / 10 Gigabit Ethernet
SPCxxB10100D SFP+ Dual Fiber CWDM CWDM / 10dB / 10 Gigabit Ethernet For your product safety, please read the following information carefully before any manipulation of the transceiver: ESD This transceiver
Intel Ethernet SFP+ Optics
Product Brief Intel Ethernet SFP+ Optics Network Connectivity Intel Ethernet SFP+ Optics SR and LR Optics for the Intel Ethernet Server Adapter X520 Family Hot-pluggable SFP+ footprint Supports rate selectable
EZ-MATE CONNECTORS The Complete Family of Multi-Channel Fiber Optic Connectors for Harsh Environment Deployable Systems
The Complete Family of Multi-Channel Fiber Optic Connectors for Harsh Environment Deployable Systems Overview The OCC EZ-MATE family of hermaphroditic style fiber optic connectors provides the most comprehensive
User Manual Entry Line Industrial Fast Ethernet Switch 4x 10/100Base-TX, 1x 100Base-X Fiber Port 4x PoE+ up to 30W
User Manual Entry Line Industrial Fast Ethernet Switch 4x 10/100Base-TX, 1x 100Base-X Fiber Port 4x PoE+ up to 30W Entry Line Fast Ethernet Switch Fast Ethernet Switch with PoE+ for Industrial Use Page
Series MCX 50 micro miniature connectors
Series MCX 50 micro miniature connectors Description Content MCX 50 HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size,weight, durability and performance for applications
LambdaFLEX Zero Chirp Tunable XFP Module TL8800ZPCND
LambdaFLEX Zero Chirp Tunable XFP Module TL8800ZPCND www.lumentum.com Data Sheet The Lumentum LambdaFLEX tunable XFP module is a high performance tunable pluggable transceiver for use in the C-band window
SMA One Piece Semi-Rigid Connectors
SMA One Piece Semi-Rigid Connectors The Johnson captivated solderless contact connectors for semi-rigid cable provide a unique solution for high frequency cable assemblers. As compared to standard solder-on
1995 Metric CSJ SPECIAL SPECIFICATION ITEM 6031 SINGLE MODE FIBER OPTIC VIDEO TRANSMISSION EQUIPMENT
1995 Metric CSJ 0508-01-258 SPECIAL SPECIFICATION ITEM 6031 SINGLE MODE FIBER OPTIC VIDEO TRANSMISSION EQUIPMENT 1.0 Description This Item shall govern for the furnishing and installation of color Single
Series SMPM-T. Description. Compatibility. Content. Interface dimensions (mm/inches) SMPM-T male (pin contact), smooth bore
Series Description The is the smallest threaded open source connector on the market. Its unique and innovative combination of a MIL- STD-348 SMPM female interface connector together with a retractable
Gigabit Multi-mode SX to Single Mode LX Converter. User s Manual NGF-728 Series. Warning COPYRIGHT
COPYRIGHT Gigabit Multi-mode SX to Single Mode LX Converter User s Manual NGF-728 Series All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted
SPECIAL SPECIFICATION 1987 Single Mode Fiber Optic Video Transmission Equipment
1993 Specifications CSJ 0027-12-086, etc. SPECIAL SPECIFICATION 1987 Single Mode Fiber Optic Video Transmission Equipment 1. Description. This Item shall govern for the furnishing and installation of color
FTS-S12G-B53Y-005. SFP 1000Base-LX, BiDi, 1550/1310nm, single-mode, 5km
FTS-S12G-B53Y-005 SFP 1000Base-LX, BiDi, 1550/1310nm, single-mode, 5km Description FTS-S12G-B53Y-005 series SFP transceiver can be used to setup a reliable, high speed serial data link over single-mode
Single mode 9/125µm, duplex
Fiber Converter Module RS-232 MICROSENS General For the connection of devices, control units and machine controls with standard serial interfaces MICROSENS is offering special fiber converters for the
DATA SHEET. Optical FireWire Repeater M4-200 & M4-201
DATA SHEET Optical FireWire Repeater M4-200 & M4-201 Contents Description Features Applications Technical Specifications Drawing of Modules Drawing of Cable Connections Bilingual Pin Description Reliability
AddOn Computer s SFP transceivers are RoHS compliant and lead- free.
SFP- SX INDUSTRY STANDARD 1000BASE- SX SFP MMF 850NM 550M REACH LC www.addoncomputer.com SFP- SX 1.25Gbps SFP Transceiver Features Up to 1.25Gb/s data links Duplex LC connector Hot- pluggable SFP footprint
QSFP+ 40GBASE-SR4 Fiber Transceiver
QSFP+ 40GBASE-SR4 Fiber Transceiver Preliminary Features RoHS-6 compliant High speed / high density: support up to 4X10 Gb/s bi-directional operation Compliant to industrial standard SFF-8436 QSFP+ standard
Look No Further... Materials & Finishes. Specifically made for all your: Gigabit Ethernet, HDMI, USB 2.0/3.0 Needs! onnectors
1 Look No Further... Specifically made for all your: Gigabit Ethernet, HDMI, US 2.0/3.0 Needs! Amphenol Aerospace now offers a connector series that can be used for all of your multi-media needs. This
SPDxx040100D SFP+ Dual Fibre DWDM 100GHz DWDM / 40 km / 10 Gigabit Ethernet
SPDxx040100D SFP+ Dual Fibre DWDM 100GHz DWDM / 40 km / 10 Gigabit Ethernet For your product safety, please read the following information carefully before any manipulation of the transceiver: ESD This
HDRFI Series Tensolite High-Performance Cable & Interconnect Systems. High Density RF Interconnect
HDRFI Series Tensolite High-Performance Cable & Interconnect Systems High Density RF Interconnect HDRFI is a patented Tensolite connection system that transfers high frequency signals through a unique
LoopBack Relay. SGLB363 Series. With Built-in AC Bypass Capacitors / DC LoopBack Relay
LoopBack Relay SGLB363 Series With Built-in AC Bypass Capacitors / DC LoopBack Relay SERIES DESIGNATION SGLB363 RELAY TYPE LoopBack Relay, Sensitive Coil, Surface Mount Ground Shield and J-Leads with AC
HN Connectors. Automatic Connector. Introduction. Contents. 631/ FAX 631/
Connectors Introduction 2004 Automatic Connector. All rights reserved. pdf 1.0 4-13-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable
FTS-M12G-S85L-55M. SFP 1000Base-SX, 850nm, multi-mode, 550m
FTS-M12G-S85L-55M SFP 1000Base-SX, 850nm, multi-mode, 550m Description FTS-M12G-S85L-55M series SFP transceiver can be used to setup a reliable, high speed serial data link over multi-mode fiber. Maximum
Industrial 10/100 Base-TX to 100 Base-FX Media Converter NS-200AFC-T/NS-200AFCS-T/NS-200AFCS-60T +12 ~ +48
NS-200AF Series Industrial 0/00 Base-TX to 00 Base-FX Media Converter NS-200AFC-T/NS-200AFCS-T/NS-200AFCS-60T NS-200AFT-T 00Base-FX e F -30 ~ +75 +2 ~ +8 LAN x x Fiber Optic Features C C Temperature Automatic
10Gbps SFP+ Optical Transceiver, 10km Reach
10Gbps SFP+ Optical Transceiver, 10km Reach Features Optical interface compliant to IEEE 802.3ae 10GBASE-LR Electrical interface compliant to SFF-8431 Hot Pluggable 1310nm DFB transmitter, PIN photo-detector
Miniature, Ruggedized 20 GHz RF over Fiber Transmitter
58 Uplander Way Culver City, CA 93 Tel: (31) -7975 sales@apichip.com www.apichip.com Product Specification Miniature, Ruggedized GHz RF over Fiber Transmitter Part #MicroATX-BW-L-FL-FC Ver a, --18 PRODUCT
TC3301. User's Manual
1000Base-T Ethernet Fiber Optic Converter User's Manual 1. Features p 1000Mbps for twisted pair, and 1000Mbps for fiber p Local Dry Contact Alarm Relay p Multimode (850nm) and Single Mode (1310nm/1550nm)
Part Number Transmitter Output Power Receiver Sensitivity Reach Temp DDM RoHS. Logic Symbol Name/Description Note 1 - GND Module Ground 1
Product Features Compliant with IEEE Std 802.3-2005 10Gb Ethernet 10GBase-BX XFP MSA Rev. 4.5 compliant Full digital diagnostic management interface XFP MSA package with Single LC receptacle optical Uncooled
IMC-21A Series. Industrial 10/100BaseT(X) to 100BaseFX media converters. Introduction. Specifications. Ethernet Media Converters and Extenders
IMC-21A Series Industrial 10/100BaseT(X) to 100BaseFX media converters Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFP) -40 to 75 C operating temperature range (T
40G SWDM4 MSA Technical Specifications Optical Specifications
40G SWDM4 MSA Technical Specifications Specifications Participants Editor David Lewis, LUMENTUM The following companies were members of the SWDM MSA at the release of this specification: Company Commscope
SFP-Bxx-ttrr. Up to 80km Sinlge-Mode SFP Transceiver. Features. Applications. Benefits
SFP-Bxx-ttrr SFP-Bxx-ttrr Up to 80km Sinlge-Mode SFP Transceiver Optomark s SFP-Bxx-ttrr transceivers for single fiber bidirectional data communication, are designed according to Small Form Factor Pluggable
40G SWDM4 MSA Technical Specifications Optical Specifications
40G SWDM4 MSA Technical Specifications Specifications Participants Editor David Lewis, LUMENTUM The following companies were members of the SWDM MSA at the release of this specification: Company Commscope
DC-6.0 GHz 1.0W Packaged HFET
Features 46. dbm OIP3 @.8 GHz 1. db Gain @ 2 GHz.0 db Gain @ 6 GHz 30.0 dbm P1dB SOT-89 Package Functional Block Diagram General Description The X is a high linearity Hetrojunction Field Effect Transistor
Series SK (2.92 mm) prec. submini. connectors
Series prec. submini. connectors Description Content HUBER+SUHNER SK connectors are precision connectors for microwave applications up to 40 GHz. They are intermateable with series SMA and PC 3.5. They
DATA SHEET. Two (2) fibers Detachable DisplayPort 1.2 Extender, DPFX-200-TR
DATA SHEET Two (2) fibers Detachable DisplayPort 1.2 Extender, DPFX-200-TR Contents Description Features Applications Technical Specifications Connection with DPAX Operating Conditions Drawing of Module
LambdaFLEX Negative Chirp Tunable XFP Module TL8900NACND
LambdaFLEX Negative Chirp Tunable XFP Module TL8900NACND www.lumentum.com Data Sheet The Lumentum LambdaFLEX tunable XFP module is a high performance tunable pluggable transceiver for use in the C-band
VGA to DVI Extender over Fiber SET
VGA to DVI Extender over Fiber SET Model #: FO-VGA-DVI 2011 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. ( Avenview ) products. Avenview
SMA - 50 Ohm Connectors
Alphabetical Index 142-0593-001 6 142-0593-006 6 142-0593-401 6 142-0593-406 6 142-0594-001 6 142-0594-006 6 142-0594-401 6 142-0594-406 6 142-0693-001 4 142-0693-006 4 142-0693-051 5 142-0693-056 5 142-0693-101
LIIN-25 FO Pigtail FC (0.9mm)
LIIN25 FO Pigtail FC (0.9mm) Features Single and Multi Mode ISO900, RoHS Compliant Test Certificate for each item Batch number tracking Standards of reference and applications ITU.T G652.D, ISO/IEC 80,
SHQP28-100G-LR4-B. 103/112Gb/s QSFP28 Transceiver Hot Pluggable, Duplex LC, +3.3V, 1310nm DML/PIN, Single mode, 10km, 0~70 C
SHQP28-100G-LR4-B 103/112Gb/s QSFP28 Transceiver Hot Pluggable, Duplex LC, +3.3V, 1310nm DML/PIN, Single mode, 10km, 0~70 C SHQP28-100G-LR4-B Transceiver module is designed for 103Gigabit and 112Gigabit
FTS-R27G-S31L-002DI. Multirate SFP 125Mbps-2.67Gbps, 1310nm, single-mode, 2km
FTS-R21G-S31L-002D Multirate SFP 125Mbps-2.67Gbps, 1310nm, single-mode, 2km Description FTS-R27G-S31L-002D series SFP transceiver can be used to setup a reliable, high speed serial data link over single-mode
10G- XFP- LR- AO. 10Gbs XFP Transceiver
10G- XFP- LR- AO BROCADE 10GBASE- LR XFP SMF 1550NM 10KM REACH LC DOM www.addoncomputer.com 10G- XFP- LR- AO 10Gbs XFP Transceiver Features Duplex LC connector Support hot- pluggable Metal with lower EMI
Power (dbm) λ (nm) LINK DISTANCE SDI Bit Rate Max. Link Distance (km) 3G-SDI 2.97Gbps 30 HD-SDI 1.485Gbps 30 SD-SDI 270Mbps 30
1310 nm / 3 Gb/s Medium Power SM Video SFP Transceiver (RoHS Compliant) **********************************************************************************************************************************************************************
10G- XFP- SR- AO. 10Gbs XFP Transceiver
10G- XFP- SR- AO BROCADE 10GBASE- SR XFP MMF 850NM 300M REACH LC DOM www.addoncomputer.com 10G- XFP- SR- AO 10Gbs XFP Transceiver Features Duplex LC connector Support hot- pluggable Metal with lower EMI
SPECIAL SPECIFICATION 6911 Fiber Optic Video Data Transmission Equipment
2004 Specifications CSJ 3256-02-079 & 3256-03-082 SPECIAL SPECIFICATION 6911 Fiber Optic Video Data Transmission Equipment 1. Description. Furnish and install Fiber Optic Video Data Transmission Equipment
SECTION 10 BNC / BNC 75 HDTV / BNC-TRX R141 / R142 / R266
SECTION 10 10 BNC / BNC 75 HDTV / BNC-TRX R141 / R142 / R266 Contents Introduction... 10-4 to 10-5 Interfaces... 10-6 to 10-7 Characteristics... 10-8 to 10-11 Finder guide...10-12 to 10-13 COMPOSITE BNC
Emcore SITU2831 Externally Modulated RF Amplified Fiber Optic Transmitter and SIRU3000 Fiber Optic Receiver
PRELIMINARY Applications RF and microwave antenna signal distribution EW Systems Broadband delay-line and signal processing systems Frequency distribution systems Radar system calibration Phased array
Hardware Specifications
APPENDIXA Note The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring
Fast Ethernet to Optical Media Converter MCE300T Data Sheet
Fast Ethernet to Optical Media Converter MCE300T Data Sheet DESCRIPTION Firecomms Fast Ethernet CAT 5 to optical Media Converter accepts standard 100 Mbps Fast Ethernet traffic from 100 Base Tx source
SECTION 9 BNC/BNC 75 HDTV/BNC-TRX R141/R142/R266 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 9 BNC/BNC 75 HDTV/BNCTRX R141/R142/R266 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents BNC Introduction... 94 to 95 Interfaces... 96 to 97 Characteristics...98
Optical Fiber Link, 0.1~ 20 GHz RF Over Fiber, I-IFLRF12
Fiber Link, 0.1~ 20 GHz RF Over Fiber, I-IFLRF12 Our I-IFLRF20 series is a wideband RF over fiber link that provides optical transport of RF signals in radars, satcom, EW/ECM and other antenna remoting
1550 nm TX / 1310 nm RX / 3 Gb/s Medium Power 1-Fibre SM Video SFP Transceiver
1550 nm TX / 1310 nm RX / 3 Gb/s Medium Power 1-Fibre SM Video SFP Transceiver (RoHS Compliant) **********************************************************************************************************************************************************************
SPECIAL SPECIFICATION 1291 Fiber Optic Video Data Transmission Equipment
1993 Specifications CSJ 0500-01-117 SPECIAL SPECIFICATION 1291 Fiber Optic Video Data Transmission Equipment 1. Description. This Item shall govern for the furnishing and installation of Fiber Optic Video
OC-48/STM-16 Bi-directional SFP Transceiver (40km) RBT25SI2
RoHS Compliant OC-48/STM-16 Bi-directional SFP Transceiver (40km) RBT25SI2 Applications SONET OC-48 / SDH STM-16 Gigabit Ethernet 1X / 2X Fiber Channel Features Description RoHS compliant 2.5Gb/s, 40Km
CWDM / 3 Gb/s Medium Power SM Video Digital Diagnostic SFP Transceiver
CWDM / 3 Gb/s Medium Power SM Video Digital Diagnostic SFP Transceiver (RoHS Compliant) **********************************************************************************************************************************************************************
The Custom Interconnect Leader TM
LC Series.5.188.685 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR: 50 ohms DC to 1.0 GHz 5,000 volts rms 3,000 volts rms 5,000
Features. = +25 C, IF= 100 MHz, LO= +13 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units
Features Passive Double Balanced Topology High LO/RF Isolation: 48 db Low Conversion Loss: 7 db Wide IF Bandwidth: DC - GHz Robust 1,000V esd, Class 1C Typical Applications The is ideal for: Point-to-Point
3G-SDI Extender via Single Mode Fiber LC Simplex Connector Extends 3G-SDI Link Up To 20 Kilo Meters
Description 3G-SDI (3G Serial Digital Interface) recently has become increasingly popular in the application of video and audio transmission system. However, the traditional copper wire cable imposes limits
GBIC BIDI Series EOLG-BI1X12-X series
EOLG-BI1X12-X series Simplex-Mode 1.25Gbps GBE/FC Simplex SC Single-Fiber SFP Transceiver RoHS6 Compliant Features Support 1.25Gbps data links A type: 1310nmTx/1550nmRx B type: 1550nmTx/1310nmRx 10km with
Gigabit Ethernet CWDM SFP Transceivers
Gigabit Ethernet s Transmitter Specifications (Optical) Features Data rates from 1.062 to 1.25 Gbps 120 km, 80 km, and 50 km reach models Single 3.3 V supply CWDM wavelengths, DFB laser APD receiver (SFP-GDCWEZX-xx)
PRE-QSFP-LR4L 100G QSFP 28 Dual Range Optical Transceiver, 10km. Product Features: General Product Description:
Product Features: -100 Gigabit Ethernet (100GbE) 100GBASE-LR4 & ITU-T G.959.1 4I1-9D1F Dual Rate Transceiver -103.125 & 111.810 Gbit/s Dual Rate Capability -Compliant to IEEE 802.3ba 100GBASE-LR4 [1] and
The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting postamplifier
Applications o 10GBASE-LR at 10.3125 Gbps o 10GBASE-LW at 9.953 Gbps o Other Optical Links Product Description XTBxxA-10LY 10 Gbps SFP+ Bi-Directional Transceiver, 10 km Reach 1270/1330 nm TX/1330/1270
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) * EE-SX/6 Photomicrosensor with 0- to 00-mA direct switching capacity for built-in application. Series includes models that
IES-3162GC. >> Industrial 18-port Managed Ethernet Switch with 16x10/100Base-T(X) Ports and 2xGigabit combo ports. Industrial Ethernet Switch
Ethernet Switch Managed Ethernet Switch IES-3162GC >> 18-port Managed Ethernet Switch with 16x10/100Base-T(X) Ports and 2xGigabit combo ports 4 Ethernet Switch Supports O-Ring (recovery time < 10ms over
100G-FR and 100G-LR Technical Specifications
100G-FR and 100G-LR Technical Specifications 100G Lambda MSA Rev 1.0 January 9, 2018 Chair Mark Nowell, Cisco Systems Co-Chair - Jeffery J. Maki, Juniper Networks Marketing Chair - Rang-Chen (Ryan) Yu,
10GE BIDI SFP+ Series
10GE BIDI SFP+ Series Datasheet Features: Operating data rate is 10.3Gbps Distance up to 60km Single 3.3V Power supply and TTL Logic Interface Bi-directional single LC Connector Interface Hot Pluggable
User s Guide TN-GB-SM512. Gigabit Interface Converter (GBIC) Transceiver Modules
Part Number TN-GB-MM5 TN-GB-ESX5 TN-GB-ESX6 TN-GB-SM5 TN-GB-SM53 TN-GB-SM55 TN-GB-SM58 TN-GB-SM512 User s Guide TN-GB-xM5x Gigabit Interface Converter (GBIC) Transceiver Modules The Transition Networks
10Gb/s SFP+ Optical Transceiver Module 10GBASE-LR/LW
10Gb/s SFP+ Optical Transceiver Module 10GBASE-LR/LW Features 10Gb/s serial optical interface compliant to 802.3ae 10GBASE LR Electrical interface compliant to SFF 8431 specifications for enhanced 8.5
GbE SFP CWDM Transceiver (120km) RCP12SVX
RoHS Compliant GbE SFP CWDM Transceiver (120km) RCP12SVX Applications Gigabit Ethernet 1x Fiber Channel Features Up to 1.25Gb/s, 120Km optical data link Eight wavelengths CWDM transceivers Uncooled CWDM
OPHIT. Specification for. Model : DPM2 DPM2. Optical DisplayPort Extension system. Customer :
Customer : Specification for Model : Revised : November 5, 2015 Original Release Date : July 1, 2014 OPHIT Revision History Version Number Revision Date Author Description of Changes 0.1 July 1, 2014 H.S
GIGALIGHT 300m XFP Optical Transceiver GX SRC
GIGALIGHT 300m XFP Optical Transceiver GX-85192-SRC Features Supports 9.95Gbps to 11.3Gbps bit rates Maximum link length of 300m (50um,MMF,2000MHz.Km) 850nm VCSEL laser and PIN receiver XFP MSA Rev 4.5
1310nm Video SFP Optical Transceiver
0nm Video SFP Optical Transceiver TRPVGELRx000MG Pb Product Description The TRPVGELRx000MG is an optical transceiver module designed to transmit and receive electrical and optical serial digital signals
Automatic Connector MHV Connectors MHV Introduction MHV series connectors Contents Polarized mating interfaces Anti-Rock mating interfaces
Automatic s 2004 Automatic. All rights reserved. pdf 1.0 3-18-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable Plugs...................
FTX-S1XG-S55L-040DI. XFP 10GBase-ER, 1550nm, single-mode, 40km
FTX-S1XG-S55L-040D XFP 10GBase-ER, 1550nm, single-mode, 40km Description FTX-S1XG-S55L-040D series XFP transceiver can be used to setup a reliable, high speed serial data link over single-mode fiber. Maximum
25W 9xxnm Uncooled Multimode Laser Diode Module
25W 9xxnm Uncooled Multimode Laser Diode Module BMU25-9xx-01/02-R Features: Single emitter based laser diode module High output power of 25W 0.15NA or 0.22NA 105μm core multimode optical fiber Hermetically
Non Magnetic Connectors Product Catalog
Non Magnetic Connectors Product Catalog Introduction Johnson s Non-Magnetic Connector Additions Offer Solutions to MR Imaging Technology Johnson, a product line of Cinch Connectivity Solutions, has expanded
WaveReady WRT Gbps Extended-Reach DWDM Tunable Transponder with XFP Client Interface
COMMUNICATIONS MODULES & SUBSYSTEMS WaveReady 10 Gbps Extended-Reach DWDM Tunable Transponder with XFP Client Interface Key Features Tunable in software over the full C-band with stimulated Brillouin scattering
User Guide. DVI + HDCP Fiber Optic Extender DVI-7330
User Guide DVI + HDCP Fiber Optic Extender DVI-7330 TABLE OF CONTENTS SECTION PAGE PRODUCT SAFETY...1 PRODUCT LIABILITY...1 1. INTRODUCTION...2 2. SPECIFICATIONS...3 3. PACKAGE CONTENTS...4 4. INSTALLATION...4