CAB-330-BEAM-IP USER S MANUAL

Transcription

1 CAB-330-BEAM-IP USER S MANUAL Thank you for purchasing a product from our CAB-330-BEAM-IP Every suit has been thoroughly tested and shipped in perfect condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your unit for any damage and be sure all accessories necessary to operate the unit has arrived intactly. In the case damage has been found or parts are missing, please contact Acson Comercial or your local supplier for further instructions. Do not return this unit without any warning.

2 Contents 1. Introduction... 3 Features Components Dimensions 2. Package Info Safety Information DMX 512 Connection... 5 DMX-512 loop resistance terminal 5. AC Input Power... 6 Input Voltage Power Consumption Fuse Standard 6. Lamp Info Color and Gobo Wheels Info Display Panel LCD Menu DMX Channel Data Drive Board Lamp Changing Method Theory Changing Method 13. Body Covers Disassembling Method Base Part Info and Installation Belt Changing Method Attention Items Common Fault FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE POWERING OR INSTALLING. SAVE IT FOR FUTURE REFERENCE 2

3 1. Introduction Thank you for choosing CAB-330-BEAM-IP, our brand new high tech fixture with international advanced electronic control technology and excellent user-friendly industrial design. It is fully compliant with CE standard, and the internationally accepted standard DMX512 signal mode. The device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. Features Equipped with the Phoenix MSD R short focus lamp and multi-layer lens,it can cast bright beams and clear gobos as well as fresh colors thanks to the the KUPO brand color wheel. Two DMX channels mode is available in Chinese and English language versions for you to choose, and the digits can cast upside-down, convenient to hang them on the truss. Pan scans 540 and Tilt runs 270. There are 14 different colors plus open and 14 gobos plus open too. There are two prisms,one 8 facet and one 6 facet column which can controlled separately or synchronously. Aside of the linear dimmer and adjustable strobe functions,the light is also equipped with the software fan speed cooling monitoring system. With these super features, CAB-330-BEAM-IP are widely welcomed by TV, DISCO, Ballroom, Nightclub, and other indoor and outdoor big events. Components Dimensions Body 2 1 Lens 3 Arm 5 Base Size: 375(length ) 372(width ) 538(height )mm Pin DMX In 3Pin DMX Out Fuse Power Socket Power Switch 3

4 2. Package Info All CAB-330-BEAM-IP lights are packed in 1in1 or 2in1 flight case or carton with accessories inside. Included accesories: Manual Safety Chain Omega Clamp (x2) DMX Cable Power Wire 3. Safety Information This device is suitable for professional purposes only. When you receive the light, check if it is broken caused by delivery. If it s broken, contact your local dealer as soon as possible. The IP rate is 54, suitable for indoor and outdoor performance. The devices should be kept dry and avoid using it in moist, overheating, dusty environment. To avoid damages caused by electric shock, fire, UV, lamp burst and device falling etc, please read the manual thoroughly before charging and installing. Make sure you know all the danger notices and abide by the instructions in this manual for correct operation. For more information, please contact your local dealer. Overheating Working temperature 40º Switch off the device immediately once the surrounding temperature is over 40. Lens Burst Prevention Lens Dimension : ø mm Change the lens if there are cracks or dent on it. ly the original brand lens is suitable to change Mounting Accident Prevention Do not carry the device alone. Make sure the facility can withstand ten times teh weight of the light before hanging. Please make sure the mounting hardware is strong enough without any damage, and using the safety chain together for secure. Let the pulley below the working place when installing or removing the device. Fire and Burning Prevention Do not install the device on flammable material surface directly. Do not short circuit the temperature protection terminal or fuse. Use the standard fuse. Stay away of the inflammable material. Do not project the light within 12 M and the material projected temperature should not be over projected range of 3 meters away objects and 60 12m. There should not be stuff within 0.5m from the fan or ventilation. Do not place anything over the lens. Let the device cool for at least 20minutes before package and delivery. Use only approved brand spare parts. 4

5 ! Attention! In order to fix the device securely, use 2 omega holders and 4 quick lock fasteners correctly into the quick lock hole turned 90 clockwise is necessary. Adding a safety chain to the base hole not the handle is extra and necessary safety method. 1 Safety Chain 2 Omega Bridge 4. DMX 512 Connection DMX512 cable must use the professional shielded twisted pair cable. The standard loudspeaker cable is not reliable for controling the long-range data. A 24AWG cable is suitable for more than 300 meters long-distance signal transmission and must add the DMX 512 signal amplifier. Do not use two outputs to separate the connection. if separate, a DMX512 splitter is necessary. If using the DMX512 splitter, first connect the DMX512 Splitter input terminal to controller and then connect from the splitter output terminal to next device. Do as above to connect other devices, and finally coupled with a 120 Ω loop resistance terminal insertion. DMX-512 loop resistance terminal If the DMX line is too long or placed in some noisy electric signals places like disco,nightclub,ballroom etc, using DMX loop resistance terminal is necessary. Welding a 120Ω resistor terminal between the pin 2 and pin 3 as below and plug it into the last light XLR output terminal. N CONTROLLER Diagram 1 Diagram 2 5

6 5. AC Input Power CAB-330-BEAM-IP input voltage, power consumption, and fuse standard.! Attention! ly a qualified electrician can operate the power related work. Please make sure the voltage input complies with the specified standard. The fixture must be grounded and equipped with overload and leakage protection. Input Voltage Power Consumption Frequency 110~240V 550W 50/60HZ Fuse Voltage Fuse Current Size 250V 5A 5 20 Live Neutral Earth Red Blue Yellow-green 6. Lamp Info! Warning To avoid potential damages caused by lamp burst, change the lamp before it s over 125% specified lifespan. Brand Power Consumption Lifespan Color Temperature Phoenix 330w 1800hrs 7200K 6

7 7. Color and Gobo Wheels Info Color Wheel. CAB-330-BEAM-IP is equipped with 14 colors plus white for pure color and excellent effect. Fixed Gobo Wheel. CAB-330-BEAM-IP is equipped with 17fixed gobos plus open.better effects with 16 facet prism. 8. Display Panel Function Keys Return function Up/Digit increase/next function Down/Digit decrease/last function Mode choosing/confirm function 2 1 Function Key Touch Screen Display 9. LCD Menu Main Menu Submenu 1 Submenu2 Function SET Function description DMX Address << to address 1 < address up > address down << to address 512 SAVE save and back back DMX DMX FEATURES SETTING Run Mode Chan Mode Mode1 Mode2 Wire Aoto no function no function 16CH 17CH 7

8 Main Menu Submenu 1 Submenu2 Function SET Function description Chan Mode Mode3 Mode4 18CH 20CH X Reverse Pan Scan Normal Pan Scan Reverse Y Reverse Tilt Scan Normal Tilt Scan Reverse X Angle FEATURES SETTING XY OCcheck Signalclear Pan/Tilt optical sensor testing off Pan/Tilt optical sensor testing on keep signal data clear signal data Full color half color function full color function Shortcut Shortcut off for color and gobo Shortcut open for colors and gobo ADV. Advanced function RST. Re-setting and back SAVE Save and back Back ZEROSETTING ADVANCED FUNCTION Zero set Password1 1 Password2 0 KEY Pan Tilt Fixed Gobos Rot Gobos Color Focus Zoom Shutter Prism Prism2 Gobos Rot Frost Gobos Row Rot Fixed Gobos16b Rot Gobos16b Coloe16b Zero reset Confirm Adjust the beginning state SAVE Save and back > Numerical value increase < Numerical value decrease back 8

9 Main Menu Submenu 1 Submenu2 Function SET Function description Use Mang Factory use only X Master 14 X Slave 84 Y Master 14 Y Slave 96 ADVANCED FUNCTION Fact Set Lamp 5V Y Angle 230 XY Speed Logo KEY Use Password1 Use Password2 Fact Passwoed1 Fact Passwoed2 FAN NORM Neutral 4KEY OFF Back MANUAL RESET TEST RUN SIMULATE DMX ALL MOTOR Yes/No PART MOTOR Yes/No XY MOTOR Yes/No NO back AUTO Auto SOUNO Sound Back CH1~CH Control Channel on display > Numerical value increase < Numerical value decrease back Back to main menu SYSTEM INFO DMX VALUE OTHER INTO CH1~CH DMX value back Run Time: Machine runing hours Run Count: How many time of the Machine power on and off Residue T: Most Running time adjust(do not adjust) Residue C: Most (do not adjust) Temp1: 0 Temperature 1 Temp2: 0 Temperature 2 Fan 1: Fan 1 speed Fan 2: Fan 2 speed PCB1: Vxxx Version 1 PCB2: Vxxx Version 2 PCB3: Vxxx Version 3 9

10 Main Menu Submenu 1 Submenu2 Function SET Function description SYSTEM INFO OTHER INTO back ERROR INTO Back to main menu Brightness 1~7 Level Back Ground light level 10sec Back Ground light dim out after 10 second. Light Delay 20sec 30sec Back Ground light dim out after 20 second. Back Ground light dim out after 30 second. Keep back ground light on DISPLAY SETTING Menuback 10sec 20sec 30sec Menu back after 10 second Menu back after 20 second Menu back after 30 second Ban the menu auto back function Flicker Back ground light flash function off Back ground light flash function on SAVE Save and back Back Default Lamp off Lamp on LAMP SETTING Manual Lamp off by manual lamp on by manual Electronic Lamp off Lamp on Language Setting English Chineese Available languages 10. DMX Channel Data Mode 1 Mode 2 Mode 3 Mode 4 DMX Value Details Description 0-4 Open 5-8 Open + Color Color Color 1 + Color Color Color 2 + Color 3 1CH 1CH 1CH 1CH Color Color 3 + Color Color Color 4 + Color Color Color 5 + Color Color 6 10

11 Mode 1 Mode 2 Mode 3 Mode 4 DMX Value Details Description Color 6 + Color Color Color 7 + Color Color Color 8 + Color Color Color 9 + Color Color Color 10 + Color 11 1CH 1CH 1CH 1CH Color Color 11 + Color Color Color 12 + Color Color Color 13 + Color Color Color 14+ Open Color rotation (clockwise) fast ->slow Rotation Halt Color rotation (anticlockwise) slow ->fast 0-1 Close 2-7 Open 8-63 Strobe,Slow ->Fast Open Pulse strobe,slow ->Fast Open Fade strobe,slow ->Fast 2CH 2CH 2CH 2CH Open Lightening strobe, Slow ->Fast Open Strobe mode Strobe mode Random slow strobe Random medium speed strobe Random fast peed Open 3CH 3CH 3CH 3CH Brightness,Dark ->Bright 0-3 Open 4-7 Gobo1 4CH 4CH 4CH 4CH 8-11 Gobo Gobo Gobo4 11

12 Mode 1 Mode 2 Mode 3 Mode 4 DMX Value Details Description Gobo Gobo Gobo Gobo Gobo Gobo Gobo Gobo Gobo Gobo Gobo Gobo Gobo Clockwise rotation Fast ->Slow Halt 4CH 4CH 4CH 4CH Anticlockwise Slow ->Fast Gobo2 shake,slow ->Fast Gobo3 shake,slow ->Fast Gobo4 shake,slow ->Fast Gobo5 shake,slow ->Fast Gobo6 shake,slow ->Fast Gobo7 shake,slow ->Fast Gobo8 shake,slow ->Fast Gobo9 shake,slow ->Fast Gobo10 shake,slow ->Fast Gobo11 shake,slow ->Fast Gobo12 shake,slow ->Fast Gobo13 shake,slow ->Fast Gobo14 shake,slow ->Fast Gobo15 shake,slow ->Fast Gobo16 shake,slow ->Fast 5CH 5CH 5CH 5CH Prism 1 Out Prism 1 In > 360 6CH 6CH 6CH 6CH Clockwise rotation, Fast ->Slow Halt Anticlockwise rotation slow ->fast 7CH 7CH 7CH 7CH Prism zoom out Prism zoom in 8CH Prism 2 Out Prism 2 In 12

13 Mode 1 Mode 2 Mode 3 Mode 4 DMX Value Details Description > 360 9CH Clockwise rotation, Fast ->Slow Halt Anticlockwise rotation slow ->fast 8CH 8CH 8CH 10CH Linear dimmer 0-100% 9CH 9CH 9CH 11CH Linear focus 0-100% 10CH 10CH 10CH 12CH X 0 -> CH 11CH 11CH 13CH X Fine tune 2 >117 12CH 12CH 12CH 14CH Y 0 -> CH 13CH 13CH 15CH Y Fine tune 2 > Empty Built-in program 1 14CH 14CH 14CH 16CH Built-in program Testing program Empty 0-69 Empty Effect motors reset (wait 8 s) 15CH 15CH 15CH 17CH XY motors reset (wait 8 s) All motors reset (wait 8 s) Empty 0-49 Empty 16CH 16CH 16CH 18CH Turn on the lamp (wait 8 s) Turn off the lamp (wait 8 s) Empty 17CH 17CH 19CH X Y speed 0-63 half color function on 18CH 20CH Half color function off Color wheel slide mode (linear slide ) Block light mode (Blocking the light during changing color) 13

14 11. Drive Board Drive board illustration. 12. Lamp Changing Method Theory Lamp Fixed Position 1 Press the Lamp to make it leave the fixed position then tilt it out 2 Steel spring blade to hold the lamp from falling 14

15 Changing Method 1 Lamp Fixed Position 2 Remove the fan 3 Remove the lamp 13. Body Covers Disassembling Method 1 Open both side axle covers 2 Remove head cover 3 Remove body cover 15

16 14. Base Part Info and Installation 1 Open basement plastic cover Power Board Basement Cover Sealing Rubber Strips 2 Loosen screws and draw boards unit out 3 Open boards unit cover Power Supply Unit 24V Power Supply Ignitor DC380 PFC (below the ignitor) 1 Open basement plastic cover 2 Loosen screws and draw power supply unit out 3 Open power unit cover! Basement Plastic Cover Attention After repairing the base part, put the cabinet cover and push it back and fix it with the four corner screws. Fix the base steel right into the rubber seal strip before pushing back the plastic base cover, then tighten the screws of the plastic cover. 15. Belt Changing Method Screws Instructions 1. Open the arm covers [ 1 2 ] 2. Remove the center cover [ 3 ] 3. Remove the Y belt [ 4 ] 4. Remove the side screws [ 5 ] 5. Unplug the wire connector [ 6 ] 6. Reemove the light arm and body [ 7 ] 7. Remove the hexagon screws [ 8 ] 8. Remove the beam units [ 9 ] 9. Change X belt [ 10 ] 16

17 16. Attention Items Check the light seal situation and make sure it s not damaged before operating it. The device can be installed normally and upside-down, The device is only up to IP 54 waterproof standard without fully sealing structure,therefore do not immerse it into water. Any damage caused by the incorrect operation won t be covered by warranty. Do not touch the device when using it in rain. Electric leakage may occur. If wet, avoid electric shock by always manipulating the fixture with insulating gloves. Correct Installations 17. Common Faults 1. The lamp cannot be ignited or intermittently turns off Check the input 220V is correct. Check if the strobe channel is open or not. Check the fan speed by entering the main menu INFO. (Fan 1 speed should be over Fan 2 speed should be over 3200) Check the PFC which should be with 220V in and DC380V out. Check if the basement fans are running or not. 2. Beam turns dim The bulb may be expired, try replacing it. Make sure the lens is clear. Clean the dust off the bulb and clean the device regularly. 3. Motors not working Check and make sure the power supply is suitable and fuse is not burnt. Check if the motor wires have been worn out. Check if the motor is stuck or the fix screws loosened. Check if the IC on the PCB are loose, poorly connected, or burnt. Check if the motor or the PCB is burnt. 4. Device can not be controlled with DMX value blinking DMX setting might be incorrect or the device might not be receiving a signal. DMX signal cable is not connected well. DMX cable signal + and signal - are inversely weld. Serial connection is too long and the signal get attenuated. Surrounding signal interference, the controller is damaged, or the signals incompatible. Running the built-in program mode. 5. Casting halo light Check and make sure the focus value is suitable for the distance cast. 6. Device workin intermittently Check the fan if running normal or if it is dusty. 7. The light can not be started Check if power supply is normal Make sure the power switch is on. 17

18 IMPORTANT In order to optimize the recovery and recycling of the materials that old appliances contain and reduce the impact on human health and the environment, please make sure that this product is recycled at the end of its life. Note: All information is subject to change without prior notice. Importer: ACSON COMERCIAL C/Pallars, Barcelona