307253 45 cable E Time switch TR 610 top3 6100130 TR 612 top3 6120130 DoFix plg-in terminal Test tap Plg-in screwless terminal C contact 1. Basic safety information WARIG Danger of death throgh electric shock or fire! ¾Installation shold only be carried ot by a qalified electrician! The device is designed for installation on DI top hat rails (in accordance with E 60715) The device corresponds to type 1 STU in accordance with IEC/E 60730-2-7 Power reserve (10 years) is redced if memory card is inserted (sing battery power)!! Bletooth OBELISK top3 (9070130) Check the depth of the control cabinet when OBELISK top3 is connected. The depth mst be > 94 mm. ¾Mont on DI top hat rails (as defined in E 60715) ¾Switched voltage-free ¾Ensre device cannot be switched on ¾Check absence of voltage ¾Earth and bypass ¾Cover or shield any adjacent live components Connecting the cable Wiring diagrams 6100130 / 6120130 2. Proper se!! The time switch is sed for lighting, ventilation and flshing applications etc. Only for se in closed, dry rooms Do not se on safety devices, e.g. escape rote doors, fire safety eqipment etc. C1 L 4 5 6 L C2 C1 Disposal ¾Dispose of device in environmentally sond manner 1 2 3 LL 1 2 3 L L 3. Installation and connection Monting the time switch WARIG Danger of death throgh electric shock or fire! ¾Installation shold only be carried ot by a qalified electrician! ¾Strip cable to 8 mm (max. 9) ¾Insert cable in the open DoFix plg-in terminal at 45 LL2 cables per terminal position possible ¾To open the DoFix plg-in terminal, press screwdriver downwards Disconnecting the cable ¾ Use the screwdriver to psh the load line connection opener downwards clic 1
4. Device description Overview of navigation men Display & bttons TIME/DATE TIME EW Programmed switching times 0 6 18 12 24 Time display Channel stats C1, C2 On Off Days of the week from 1 to 7 Activate display Open men Cancel men ESC (leave men) ¾ Options are displayed OK PERM OFF WEEK DAY OVERR O HOLIDAY FORM DATE FORM TIME Display of the active bttons with the relevant fnction PERM O SU--WI SET DATE Date display MAUAL OK Save selection Confirm selection OPTIOS OPERATIG LCD ILLUMIATIO LAGUAGE PI FACTORY SETTIGS IFO Operating instrctions 1. Read text line text/symbol represents qery Initial operation DEUTSCH EGLISH 2. Make a decision ESPAOL FRACAIS... YES Confirmation Press OK YEAR MOTH DAY FORM TIME O Modify/ Change MIUTE SU-WI EUROPE Press t FORM DATE 28 02 16 C1 off C2 off 9:40 46 ¾ Set langage, date, time as well as smmer/winter time (SU-WI) ¾ Press any btton and display follows on screen (see figre) 2
5. Settings and fnctions Set switching time EW MEM FREE 56 O MIUTE LLYo can either change or delete a block, i.e. a switching time copied for several days (e.g. Mon-Fri) or a single switching time Change individal switching times ¾Press ¾Select and press OK to confirm ¾Select or C2, confirm with OK ¾Select, confirm by pressing OK ¾Select day, confirm with OK ¾, se the + or bttons to change hor and minte and confirm with OK. ¾To change several switching times, select BLOCK, confirm with OK same switching time for several days = block COPY ADD TUESDAY SAVE MODAY SAVE Switching time for one day Delete switching program EW LLA switching time always consists of a start time and an end time LLThere are 56 memory cells available Example: Switch on sports hall lighting from Mon Fri, 7:30 to 12:00 hrs ¾Press ¾Select and press OK to confirm ¾Select or C2, confirm with OK ¾Select EW and press OK to confirm ¾Select O (for trn-on time) or OFF (for trn-off time), confirm with OK ¾Set reqired trn-on time (Mo Fr, 7:30), confirm with OK ¾Select COPY, confirm with OK ¾ADD TUESDAY is displayed, confirm by pressing OK and also confirm the days We, Th, Fr by pressing OK. ¾Contine with ntil SAVE is displayed. ¾Confirm by pressing OK. Repeat all steps for the trn-off time, however instead of selecting O with select OFF and enter 12:00 for hor and minte. BLOCK SIGLE MODAY SIGLE DAY ALL LLYo can either delete a block, i.e. a switching time copied for several days (e.g. Mon-Fri) or a single switching time ¾Press ¾Select and confirm with OK ¾Select or C2, confirm with OK ¾Select, confirm with OK ¾IDIVIDUAL is displayed (with ALL), confirm with OK ¾MODAY is displayed, confirm with OK ¾Select BLOCK, confirm with OK ¾With MODAY etc. individal days can also be cleared. Change switching times EW MODAY MIUTE BLOCK SIGLE DAY 3
Setting holiday fnction ok MAUAL Channel C1 Channel C2 PERM O PERM OFF OVERR O HOLIDAY O BEGI HOLIDAY...... HOLIDAY ¾Press ¾Select MAUAL and press OK to confirm ¾Select or C2, confirm with OK ¾Select HOLIDAY and press OK to confirm ¾Select O and press OK to confirm ¾Select START HOLIDAY and press OK to confirm ¾Enter YEAR, MOTH, DAY, and press OK to confirm ¾Select HOLIDAY and press OK to confirm ¾Enter YEAR, MOTH, DAY, and press OK to confirm Activating PI code Activating manal control ¾Briefly press both bttons simltaneosly Activating permanent switching ¾Press both bttons simltaneosly for 2 seconds Cancelling manal/permanent switching ¾Press both bttons simltaneosly Hor conter The operating hors of the channel (relay) are displayed and deleted in the OPTIOS men. If the nmber of operating hors exceeds the vale set in the Service men, SERVICE will appear in the display. Example: Replace a lamp after after 5,000 h. ¾Delete operating hors or set a higher vale in Service (e.g. to 10,000 h) Using Bletooth OBELISK top3 All fnctions can also be transferred to the time switch sing the Bletooth OBELISK top3 memory card (9070130). The PI code is set in OPTIOS via the men. LLIf yo have forgotten yor PI, call the Theben Hotline. LLHave the serial nmber ready. OPTIOS OPERATIG S LCD ILLU- MIATIO LAGUAGE PI FACTORY SETTIGS IFO O PI WITH PI CURRET PI EW PI 00 00 Setting manal or permanent switching Manal or permanent switching can be set via the men in MAUAL or (in the atomatic screen) by btton combination (see pictre). Manal control: Reversing the channel stats to the next atomatic or programmed switching. Permanent switching: As long as a permanent switching (on or off) is activated, the programmed switching times are ineffective Copying OBELISK TIME SWITCH This copies the switching program and optionally all time switch settings (e.g. external inpt, time format etc.) from the memory card in the time switch. Copying TIME SWITCH OBELISK This copies all switch programmes and settings from the time switch to the memory card. Starting OBELISK program Takes on the switching times that are programmed on the memory card. As soon as the memory card is removed, the switching times of the time switch are re-activated. 4
OBELISK BLUETOOTH COPY OBELISK -> TSWI COPY ALL DATA COPY COPY TSWI RU -> OBELISK OBELISK OVERWRITE OK OBELISK Connect time switch, Bletooth OBELISK top3 and smartphone (via app) ow, for example, projects can be created and ploaded. The devices in the top3 range can be programmed sing an app (for Android, ios) on a mobile end device. Commnication takes place via Bletooth OBELISK top3. Switch programmes are transferred and direct switch commands are sent to the device. ¾Download the OBELISK top3 app from the App Store or Google Play Store Resetting the time switch L Bletooth connection only possible in atomatic mode, not in manal mode like OPTIOS etc. ¾Open the app and activate sing one of the 3 commands, by pressing Download, Manal command or Upload Device/device list appears on the display. ¾ Press the 4 bttons simltaneosly Yo can choose between KEEP and ¾Press Connect ¾Press OK on the time switch The display shows BLUETOOTH ACTIVE ¾Press Close in the app within 30 s 5
6. Technical data Operating voltage: 230 V AC +10 % / 15 % Freqency: Standby: 50 60 Hz 0,4 W Max switching capacity: 16 A (at 250 V, cos ϕ = 1) switching capacity: 10 A (at 250 V, cos ϕ = 0,6) Min. switching capacity: Switch otpt: TR 610 top3: Shortest switching time: Switching accracy: Protection rating: Protection class: 10 ma/230 V AC 100mA/ 24 V AC/DC switching of any phase is permitted (TR 612 top3) sitable for switching SELV (Safe Extra-Low Voltage) 1 min accrate to the second IP 20 in accordance with E 60529 II in accordance with E 60730-1 sbject to designated installation Operating temperatre: 30 C +55 C Power reserve: 10 years at +20 C (withot Bletooth OBELISK top3) Time accracy (typical): ±0,25 s/day (25 C) Rated implse withstand voltage: Polltion degree: 2 Contact: Glow lamp load: Halogen lamp load: Florescent lamp load: ncorrected: Series corrected: parallel-corrected: Compact florescent tbes (EVG): LED lamps (< 2 W): LED lamps (> 2 W): Bletooth OBELISK top3: Protection rating: Temperatre: Range: 4 kv two way switch 2600 W 2600 W 2600 VA 2600 VA 1300 VA (130 µf) 1100 W 50 W 600 W IP 40 30 C to +55 C 15 m on open air test site LLThe time switch display is only flly fnctional at temperatres from +5 C - +55 C. 7. Contact Theben AG Hohenbergstr. 32 72401 Haigerloch GERMAY Tel. +49 7474 692-0 Fax +49 7474 692-150 Hotline Tel. +49 7474 692-369 hotline@theben.de Addresses, telephone nmbers etc. www.theben.de 6