EN-Installation manual 0 1 1/1 DM CONTROL MODULES (VCS-R-DM-..) VCS-R-DM-S, VCS-R-DM-E, VCS-R-DM-V B0-010-011-1 QUICK START INSTALLATION
1. BEFORE YOU BEGIN Symbols are used in the user s manual to improve your orientation. The following table includes their graphical images and meanings: SYMBOL ATTENTION! Warning/caution MEANING DO NOT OVERLOOK! Important instructions YOU WILL NEED NOTE Practical tips and information TECHNICAL INFORMATION More detailed technical information LINK Refer to other parts/sections of the manual Declaration of conformity Declatarion of confortmity for SM control modules is part of declaration of conformity for air curtains STANDESSE Comfort. Declaration of conformity is located at www.vv.cz Air curtains STANDESSE Comfort are produced with universal connection interface. Air curtains STANDESSE Comfort can be controlled by one of following control modules. Control modules (SM, DM or DA) are required accessories for VCS... air curtains and has to be ordered separatelly. Air curtains STANDESSE Comfort is connected with control module by Quick connection sockets
. UNPACKING.1 CHECK THE SHIPMENT 1x x 0 1. MAIN PARTS.1 DM control module (suitable with all types of air curtains) Types of DM control modules: VCS-R-DM-S (Suitable with air curtains without heating - VCS-x-xxS- ) X (WHITE)
. MAIN PARTS VCS-R-DM-V (Suitable with air curtains with water coil VCS-x-xxV- ) 0 1 X (BLUE) X (WHITE) VCS-R-DM-E (Suitable with air curtains with electric heater VCS-x-xxE- ) X (NONE) X (RED) X (BLUE) X (WHITE) 0 1. Function overview of DM control modules Air curtains execution Control module Air only (VCSx-xxS...) DM (VCS-R-DM-S) With electric heater (VCSx-xxE...) DM (VCS-R-DM-E) With water coil (VCSx-xxV...) DM (VCS-R-DM-V) Type of control Manual Manual Manual Speed of the fan *** *** *** Electric heater regulation x steps x Water heater regulation x x Zone valve Control panel connection Radio signal Radio signal Radio signal Number of quick connection sockets 1 Door switch behavior ON/OFF ON/OFF ON/OFF Timer x x x Temperature measurement x x Room thermostat Operation state indication LED LED LED Radio signal indication LED/ BEEP sound LED/ BEEP sound LED/ BEEP sound Cleaning interval indication x x x Water heater anti-frezze protection x x x Aftercooling of electric heater x 0 seconds x Chaining of the air curtains In radio signal range In radio signal range In radio signal range
. INSTALLATION.1 MECHANICAL INSTALLATION.1-1 Insert control module to the air curtain.1- remove blinding sticker When DM contol module is used it is necassary to remove blinding sticker of operation signalization
. INSTALLATION.1 ELEKTRO INSTALLATION Installation must be carried out by a professionally trained electrical worker. All applicable national regulations and directives must be observed. The electrical schematics on the product take priority over those presented in this manual! Prior to installation, check to see if the terminal markings correspond to the markings on the electrical connections diagram. When in doubt, contact your supplier and do not connect the air curtain under any circumstances. Never reach inside the air curtain unless the main electrical supply has been turned off! Air curtains STANDESSE Comfort is connected with control module by Quick connection sockets 6
. INSTALLATION.1-1 Insert control module to the air curtain VCSx-xx-S-... VCS-R-DM-S-. 1 1 0 1 1 1 WHITE WHITE 6 6 FUSE 8 8 Door contact X1 L N PE L N PE CYKY Cx1, 0V/0Hz
0 1. INSTALLATION VCSx-xx-E-... VCS-R-DM-E-. 1 1 1 1 WHITE WHITE 6 6 8 8 1 1 BLUE 6 6 BLUE Door contact 8 8 1 1 RED RED 6 6 FUSE 8 8 X1 L1 L L N PE L1 L L N CYKY Cx... 00V/0Hz PE 8
0 1. INSTALLATION VCSx-xx-V-... VCS-R-DM-V-. 1 1 WHITE 6 8 6 8 WHITE 1 1 BLUE 6 6 BLUE Door contact 8 8 FUSE X1 L N PE M ZV- L open L N L N PE CYKY Cx1, 0V/0Hz Room thermostat TER-P 9
. INSTALLATION. CONTROL PANEL.-1 Control panel description VCS-R-DM-S VCS-R-DM-V ON OFF radio signal ON OFF 1. heating step radio signal heating OFF 0 1. fan speed. fan speed 1. fan speed 1. fan speed. fan speed. fan speed VCS-R-DM-E ON OFF 1. heating step radio signal heating OFF 0 1. heating step 1. fan speed. fan speed. fan speed.- Control panel mechanical installation 10
0 1. INSTALLATION.- Control panel connection DM control panel (radio signal) Esc Auto Man SET TIME CLEAN RESET SET TIME SWITCH - Range of radio signal in open space is 100m - DM control panel need for the operation x AAA baterry. (Included in delivery) Setting of radio communication frequency setting is required..-.1 Single air curtain operation The DM control panel is paired* with DM control module from production. (*Pairing - DM control module is set up on the same frequency as control panel is) If pairing procedure is required (in case of control panel baterry changing, change of control panel, ) -.-1 PAIRING PROCEDURE 11
0 1. INSTALLATION.-. Chained air curtain operation (more air curtains controlled by one control panel) 0 1 To control more air curtains by one control panel, it is neccessary to make pairing (*Pairing - set up DM control module on the same frequency as control panel is using) Each control module DM (air curtain) can operate with up to 60 control panels. This gives an possibility to control air curtain by more (up to 60pcs) control panels in radio signal range..-1 PAIRING PROCEDURE If there is use more then one control panel for chained air curtains. The air curtains will work according last received radio command from control panel. The other control panel will signalizate its own last setting!! 1
. INSTALLATION. PAIRING PROCEDURE Each air curtain can be controlled by its own DM control panel, or one DM control panel can control all paired air curtains in range of radio signal. This functionality can be set by PAIRING. SET LED PROG SIG LED SIG OPR (Signalization of operation) SET LED (programing radio signal indication) SIG LED (radio signal signalization) PROG (programing button) SIG OPR.-1 Pairing of DM control panel with DM control module (air curtain) 1x PROG SET LED SHINING (READY FOR PAIRING max.1 sec.) 0 1 HOLD sec. To add another DM control panel to paired control panel memory of DM control module repeat pairing procedure (part:.-1) with another DM control panel. (DM control module has memory for 60pcs of DM control panels). SET LED x FLASH (PAIRING IS DONE) 1
. INSTALLATION.- Deleting of paired control panel memory HOLD PROG 10 sec. SET LED SHINING SET LED OFF (PAIRING IS DELETE).- Deleting one paired DM control panel from paired control panel memory 1x PROG SET LED SHINING (READY FOR max.1 sec.) 1x PROG SET LED FLASH 0 1 SET LED OFF (PAIRING IS DELETE) SET LED x FLASH HOLD sec. 1
. EXTERNAL ACCESSORIES.1 CONNECTION OF EXTERNAL ACCESSORIES When connecting external accessories, the electricity to the air curtain must be turned off. All external control components must be connected according to the electrical schematic. The connectors must be connected to the electrical board using reasonable force and always vertically to the base..1-1 Door contact - Isolated switching contact with a maximum voltage of 1V. Cable - Dual-core cable with a diameter of 0. mm. - Maximum length: 0 m. For DM and DA control modules only! Connectors on the DM control modules: / Not included in delivery..1- Zone valve ZV- - Zone valve for water heater regulation - Cable Three core cable with diameter of 1, mm, 0 V/ 0 Hz. For VCS-R-DM-V control modules only! Connectors on the DM control modules: 1 / / Not included in delivery. 1
. EXTERNAL ACCESSORIES.1- Room thermostat TER-P - Room thermostat for water heater regulation - Cable Two core cable with diameter of 1, mm, 0 V/ 0 Hz. For VCS-R-DM-V control modules only! Connectors on the DM control modules: / Not included in delivery. Accessories overview Required accessories Optional accessories Air curtains execution Control module "External temperature sensor" Air only (VCSx-xxS...) DM (VCS-R-DM-S) With electric heater (VCSx-xxE...) DM (VCS-R-DM-E) Water coil regulator X X With water coil (VCSx-xxV...) DM (VCS-R-DM-V) X X X "ZV- (Zone valve)" Door switch X X X Door contact -1-1 -1 Room thermostat X X TER-P Ceiling mounted brackets VCS-KONZ-STR. VCS-KONZ-STR. VCS-KONZ-STR. Wall mounted brackets VCS-KONZ-STE. VCS-KONZ-STE. VCS-KONZ-STE. EXIT sign VCS-EXIT VCS-EXIT VCS-EXIT 16
6. INITIAL START-UP Before putting the air curtain with DM control module into operation, check the following: Have any tools or other objects which could damage the curtain been left inside it? Is there a proper supply of electricity and, if necessary, heating water? Has the air curtain been properly closed? Has the control module been connected properly? Before putting the curtain into operation, read carefully: Full manual for OPERATION AND MAINTENANCE (delivered with control module). CONCLUSION If you have any doubts or questions, do not hesitate to contact our sales or technical support department. Before operation and maintanance, thoroughly read the section Safe use of air curtains. It contains all instructions on the safe and correct use of the product. CONTACT Address VV, s.r.o., Poděbradská 89, 0 09 Pardubice, Czech Republic Internet: http://www.vv.cz/contact.distribution.php 1