PHASE VISLINK: Wireless Camera Systems

Transcription

1 PHASE VISLINK: Wireless Camera Systems L1700 Camera Transmitter.p. 2-3 INCAM G Grass Valley Camera Transmitter...p. 4-5 INCAM S Sony Camera Transmitter...p. 6-7 CLIP ON 4 Camera Transmitter...p. 8-9 Camera Control System p OCP 5 Camera Control System.p FOCAL POINT Camera Control System..p UltraLite 4K UHD Wireless Cam Encoder...p UltraDecoder HEVC Decoder..p Barrel Booster.p L3025 DownConverter.p

2 L1700 Camera Transmitter The L1700 range of wireless transmitters represent the next generation of flexible wireless systems from Link. Now even more powerful this new range is the most compact and versatile available. With multiple inputs and mounting options this unit can be mounted to full broadcast camera for sports broadcasters or ENG camera for news or even a prosumer camera to broaden the market reach further. With user interchangeable RF modules and a range of software options the Link L1700 continues the line of innovative, high performance RF transmitters. Key Features H.264 Very Low Latency Encoder HD-SDI / 3G HD-SDI / HDMI / Composite input Wi-Fi Control Docks with L1750 range of TX modules Integrated Camera Control (requires L1750 for UHF reception) Typical Applications Event Coverage Newsgathering Sports Coverage

3 SPECIFICATIONS TRANSMITTER L GHz to 2.7GHz frequency range L GHz to 3.9GHz L GHz to 7.125GHz L GHz to 7.5GHz DVB-T at bandwidths of 6 / 7 / 8 MHz LMS-T proprietary modulation for enhanced mobile operation LMS-T bandwidths of 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20 or 24MHz with 2 carrier density options Optional Link Digital Pre- Distortion for enhanced adjacent channel performance UHF RECEIVER 410MHz to 490MHz frequency range ENCODER 20ms to 1340ms latency depending on operational mode H.264 4:2:2 8-Bit to 1080i 60 high 4:2:2 level 4.1 (L1730) L1730 No longer available, replaced by L1731 H.264 4:2:0 8-Bit to 1080p 60 (L1731) 1920, 1440 & 960 horizontal resolutions at 1080i 1280, 960 & 640 horizontal resolutions at 720p 2 stereo audio pairs MP1L1 and MP1L2 FRAME RATES (FPS) L1730 No longer available 1080i 25/29.97/30 720p 50/59.94/ p 23.98/24 L i 25/29.97/30 720p 50/59.94/ p 50/59.94/60 VIDEO INPUTS SDI / HD-SDI (L1730) / 3G SDI (L1731) (BNC) HDMI (Type-D) Composite (Lemo) AUDIO INPUTS Embedded audio over SDI / HD-SDI (L1730) / 3G SDI (L1731) 1 analogue audio stereo pair (Lemo) Mic / Line level support with phantom power Headset audio input DATA INPUTS RS232 input relayed to receiver e.g. for external GPS unit HEADSET (3.5MM JACK) Headset microphone audio selectable as audio source Primary audio channel monitoring ASI (LEMO) Input (for service multiplexing) Output Input and Output on multifunction pins NETWORK (RJ45) 100Mbit/s Ethernet Output Transport Stream over UDP or RTP Integrated webserver for control NETWORK (WI-FI) 2.4GHz Mobile phone / tablet friendly web pages CAMERA CONTROL (LEMO) Support for various professional broadcast cameras Used in conjunction with an L1750 module Dual channel wet tally 12V output USER INTERFACE OLED display for enhanced visibility DOCKING MODULE INTERFACE Docks with L1750 transmitter / UHF receiver POWER Power supply via Lemo e.g. to connect to D-Tap power source Extended operation voltage range 10V to 32.2V POWER CONSUMPTION Nominally 15W in standard configuration (with L ) PHYSICAL Dimension 135 (L) x 40 (H) x 83 (W) mm (inc. Removable heatsink mounts, exc. RF connectors) Weight 550g (including removable heatsink, excluding antennas) ENVIROMENTAL Operating Temperature: 10º C to +50 C NOTES Availability subject to confirmation. Some features specified are available via optional licenses Not all encoder interface options are concurrently available We reserve the right to change specifications at any time without prior notice sales@vislink.com 07/15 ENG RD Rev Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

4 INCAM-G Grass Valley Camera Transmitter Built into the Grass Valley LDX series HD camera, the Vislink INCAM-G Integral Wireless Camera Transmitter provides full HD broadcast quality encoding at 1080p, 1080i, and 720p plus built in wireless camera control. Key Features Built in Wireless Camera Control Ultra Low Delay down to 20ms H.264 Data rates up to 39Mbit/s Add on PA Barrel Booster option Video and tally outputs for Steadycam Full configuration available by Windows PC software Typical Applications Event Coverage Newsgathering Sports Coverage

5 SPECIFICATIONS Frequency Bands 1.95 to 2.7GHz, 3.3 to 3.7GHz (consult factory for other bands) Tuning Range 400MHz standard bandwidth or 1.95 to 2.7GHz factory option Frequency Selection Up to 16 pre-set channels or tuning in 1MHz steps (500kHz steps available to special order) Transmit Power Adjustable 10 to 250mW (or add Barrel Booster option). * subject to frequency band Transmit Antenna Omni Directional 4dBi gain (nominal) Modulation COFDM DVB-T 2K or switchable LMS-T (factory option) or switchable ISDB-T (factory option), 2K, 4K, 8K with Time Interleaving selectable 100ms, 220ms, 440ms Modulation Modes QPSK, 16QAM, 64QAM FEC: 1/2, 2/3, 3/4, 5/6, 7/8 Guard interval: 1/32, 1/16, 1/8, 1/4 Bandwidth DVB-T / ISDB-T 6, 7, 8MHz switchable LMS-T scalable 3 to 20MHz (factory option) Data Rate DVB-T / ISDB-T 4.98 to 31.7Mbit/s LMS-T up to 39Mbit/s, bandwidth dependant (factory option) Encoding H.264/MPEG-4, level 4.1 video. Profile / selectable Audio MPEG-1 layer 2 / layer 1 selectable Latency Selectable down to less than 1 frame, 20ms GOP & PIDs GOP Selectable 4 to 30 PIDs user configurable Video Input HD SDI 1080i, 1080p, 720p as defined by the camera Audio Inputs Two audios, includes external audio input with phantom powering Audio encoding rate selectable 128, 256, 384kBit/s User Data input (camera control return data) Selectable 1,200 to 230,400 baud Monitoring and Control Comprehensive transmitter setup via Windows PC software Power Supply 12-16V DC, 18 Watts, includes external DC input Environmental -20 to +50 C Altitude: 4500m, Humidity: 95% long term Camera Control data receiver Operating bands - UHF and VHF Tuning step size kHz or 6.25kHz Modulation - GMSK Data rate to bps Tally - included sales@vislink.com 08/14 - Rev 1 RD Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

6 INCAM-S Sony Camera Transmitter Built into the Sony HDC-2400, 2500, 2550 series HD camera, the Vislink INCAM-S Integral Wireless Camera Transmitter provides full HD broadcast quality encoding at 1080p, 1080i, and 720p plus built in wireless camera control. Key Features Built in Wireless Camera Control Ultra Low Delay down to 20ms H.264 Data rates up to 39Mbit/s Add on PA Barrel Booster option Full control via the camera viewfinder Typical Applications Event Coverage Newsgathering Sports Coverage

7 SPECIFICATIONS Frequency Bands 1.95 to 2.7GHz, 3.3 to 3.7GHz (consult factory for other bands) Tuning Range 400MHz standard bandwidth 1.95 to 2.7GHz factory option Frequency Selection Up to 16 pre-set channels or tuning in 1MHz steps via side mounted panel control (500kHz steps available tospecial order) Transmit Power Adjustable 10 to 250mW (or add Barrel Booster option). *subject to frequency band Transmit Antenna Gigawave Omni Directional 4dBi gain (nominal) Modulation COFDM DVB-T 2K or switchable LMS-T (factory option) or switchable ISDB-T (factory option), 2K, 4K, 8K with Time Interleaving selectable 100ms, 220ms, 440 ms Modulation Modes QPSK, 16QAM, 64QAM FEC: 1/2, 2/3, 3/4, 5/6, 7/8 Guard interval: 1/32, 1/16, 1/8, 1/4 Bandwidth DVB-T / ISDB-T 6, 7, 8MHz switchable LMS-T scalable 3 to 20MHz (factory option) Data Rate DVB-T / ISDB-T 4.98 to 31.7Mbit/s LMS-T up to 39Mbit/s, bandwidth dependant (factory option) Encoding H.264/MPEG-4, level 4.1 video. Profile / selectable Audio MPEG-1 layer 2 / layer 1 selectable Latency Selectable down to less than 1 frame, 20ms GOP & PIDs GOP Selectable 4 to 30 PIDs user configurable Video Input HD SDI 1080i, 1080p, 720p as defined by the camera Audio Input Audio encoding rate selectable 128, 256, 384kBit/s User Data input (camera control return data) Selectable 1,200 to 230,400 baud Monitoring and Control Comprehensive transmitter setup via camera viewfinder. Power Supply 12-16V DC, 18 Watts Weight Additional camera weight, 470g Environmental -20 to +50 C Altitude: 4500m, Humidity: 95% long term sales@vislink.com 08/14 - Rev 1 RD Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

8 Clip-On 4 Camera Transmitter Designed for use with both HD and SD cameras for electronic newsgathering, television outside broadcasts and studio applications, with latency down to one frame (33ms), and using the latest H.264 or MPEG-2 encoding, the Clip-On 4 offers exceptional picture quality and capability. No other wireless camera system can match the outstanding RF performance of the Clip-On 4. Full remote control of broadcast cameras is available when used in conjunction with the Gigawave Camera Control system. Key Features Interchangeable RF Modules Built in Wireless Camera Control (option) Ultra Low Delay down to 20ms H.264 Future proof for 1080p software upgrade Add on PA Barrel Booster option Encryption BISS 1 and E, or AES256 (option) Typical Applications Event Coverage Newsgathering Sports Coverage

9 SPECIFICATIONS Frequency Band GHz (consult factory for other bands) Tuning Range 400MHz standard bandwidth 1.95 to 2.7GHz factory option Frequency Selection Up to 16 pre-set channels or tuning in 1MHz steps via side mounted panel control (500kHz steps available to special order) Transmit Power Adjustable 10 to 200mW, (or add Barrel Booster option). Transmit Antenna Gigawave Omni Directional 4dBi gain (nom.) Modulation COFDM DVB-T 2K ISDB-T 2K with Time Interleaving selectable 100ms, 220ms, 440 ms (factory option) LMS-T (factory option) Modulation Modes QPSK, 16QAM, 64QAM FEC: 1/2, 2/3, 3/4, 5/6, 7/8 (modulation dependant) Guard interval: 1/32, 1/16, 1/8, 1/4 Bandwidth DVB-T 6, 7, 8MHz switchable LMS-T scalable 3 to 24MHz (factory option) Data Rate DVB-T 4.98 to 31.7Mbit/s LMS-T up to 43Mbit/s, bandwidth dependant (factory option) Encoding H.264/MPEG-4, level 4.1 video, or MPEG-2 Profile / selectable Audio MPEG-1 layer 2 / layer 1 selectable Latency Selectable down to sub 1 frame, 20ms GOP & PIDs GOP Selectable 1 to 30 PIDs user configurable Video Input SDI HD SMPTE-292M (299M) 1080i / 720p, (1080p future) SDI SD SMPTE-259M (272M) 576i / 480i Analogue: CVBS (PAL/NTSC) or component YUV, Y/C HDMI Test signal: Colour bars Audio Input 4 channels, Analogue mic/line switchable SDI embedded, AES digital, HDMI Audio encoding rate selectable 128, 256, 384kBit/s Test signal: Audio tones ASI input ASI input, selectable through front panel menu Built in ASI MUX ASI output User Data input (camera control return data) Selectable 1200 to 230,400 baud Encryption BISS modes 1 and E, or AES256 (factory options) Remote control Ethernet port, web browser interface. Power Supply 10-35V DC Size & Weight 178 x 106 x 91mm (including connector), 0.95kg Environmental -20 to +50 C Altitude: 4500m, Humidity: 95% long term sales@vislink.com 09/14 - Rev 1 RD Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

10 Camera Control System Wireless Camera Control System Overview The VISLINK Wireless Camera System based on the L1500, with the L1255 Wireless Camera Control Unit (CCU) and the L1520 Camera Control module is the most versatile wireless camera system on the market. Full camera control using manufacturers Operator Control Panels (OCP) is the only way to ensure the pictures from wireless cameras match those of their wired counterparts. The Link Camera Control System provides vision engineers with the facility to use the same control panels for wired and wireless cameras. The system makes every feature available on the panel to achieve the desired pictures and meet the most demanding broadcast requirements. Features Fully functional manufacturers control for broad range of Sony, Thomson, Ikegami, Panasonic and Hitachi cameras and panels MHz frequency range with 250Hz selection resolution. L1520 camera control receive module integrated into L1500 camera back transmitter. No need for additional protocol conversion boxes or cabling. Full functionality of the Manufacturers control panel including real-time feedback of parameters from the camera to the OCP. Data cables supplied for specific camera types. Red and green tally for supporting cameras. Tally outputs on camera back for additional tally lights Supports Link Generic camera control system. Support for remote location of UHF transmitter PUBLIC SAFEY VISLINK News and Entertainment The L1255 Wireless CCU interfaces the control panel and is a transmitter for sending the control data to the L1520 module within the L1500 Camera Back. This communication operates using UHF and a robust modulation scheme. Closed loop control is achieved with return data being sent on the video transport stream back to the CCU. The L1255 Wireless CCU Interface is a half width rack unit which can be mounted next to the Lynx L1274 or the Link L2134, only occupying 1RU. The L1520 slots into the L1500, occupying no additional space and can be easily be fitted in the field. Link have been providing fully featured camera control using manufacturers panels since 2007 and have worked closely with end users and camera manufacturers to develop it into the product it is today.

11 Specifications L1520 Camera Control Receiver L1255 Wireless CCU Interface RF Characteristics L MHz L MHz Frequency step size 250Hz Sensitivity 117dBm [typical 50kHz channel spacing] Modulation GMSK Data Rate 9.6K Baud Adjacent channel rejection 50dB [typical 50KHz offset] Inputs & Outputs UHF Input SMA Jack, 50Ω Camera Control Data 5pin Lemo, Tally 6 pin Lemo, Physical (Fits within L1500) Weight: 0.2kg (0.45lb) Power 6W Supplied by L1500 Environmental Temperature (operating) 0 to +50 C [32 to122 F] Humidity (non-condensing) 95% Compliance EN V2.1.1 RF Characteristics Frequency range MHz Output Power 0.1-2W Occupied Bandwidth 20KHz Step size 250Hz Modulation GMSK Data Rate 9.6K Baud Inputs & Outputs UHF Output BNC Jack, 50Ω Control panel connection 9way D-type (data and power) Tally 1 & 2 XLR 3 pin Female Remote Serial RS-232 Control, 6 pin Lemo, Physical Chassis 1RU height, half rack width, Dimensions 210mm [8.3 ] x 350mm [13.8 ] Weight: 2.5kg (5.5lb) Power Vac; 20W (max at 2W Tx power) Environmental Temperature (Operating) 0 to +50 C [32 to122 F ] Humidity (Non-Condensing) 95% Compliance ETSI EN V1.6. FCC Parts 15 & 90 Auxiliary (For 2nd L1255 to act as a remote transmitter) 5 pin Lemo Rx Input 6 pin Lemo Supported Cameras Ikegami SD HL45 HC400W HL55 HL60 HL57 HL59 HL65W HK355P HK355 HK366P HK366 HK377P HK388P HK388 HLV55 HL-DV5 HK399 Ikegami HD HDK79EXIII HDK79EC HDS-V10 Sony SD BVP30 BVP BVP90 E10/E PDW-700 DXC-D30 DXC-D35 DXC-D50 DXC-D55 DNW-9WS DSR-450 DVW-970P Sony HD HDC-1400 HDC-1450R HDC-1500 HDC-1500R HDC-1550 HDW-650P PDW-700 PDW-750 PDW-EX3 HXC-100 HSC-300 HDC-P1 Thomson SD LDK100 LDK200 LDK300 LDK500 Thomson HD LDK-3000 LDK-6000 LDK-7500 LDK-8000 LDK-8000Elite Panasonic HD AJ-HPX900 AJ-HPX2700 AJ-HPX2100E AJ-HPX3700G Hitachi HD SK-HD1000 Output L1500 LINK Transmitter L3025 Downconverters LYNX Diversity Receiver L1520 Camera Control Receiver Example Camera Control System Diagram L1255 Wireless CCU Interface Operator Control Panel (OCP) Note: For other cameras please consult VISLINK Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. 2 / 2 / 2011

12 OCP-5 Camera Control System The Wireless Camera Control System provides comprehensive control functions and includes three main units - the Operator s Control Panel (OCP), UHF Data Transmitter and the Data Receiver mounted on the camera. As an option, an additional auxiliary interface unit allows up to 8 OCPs to be connected to a single Data Transmitter, allowing multiple cameras to be controlled using a single narrow-band frequency. Return Data may be provided by the User Data feature on Gigawave Clip-On transmitters and receivers. Key Features Compact Intuitive menu driven LCD display Typical Applications Event Coverage Newsgathering Sports Coverage

13 SPECIFICATIONS CAMERA CONTROLS (CAMERA MODEL DEPENDENT) RGB White balance Auto/manual iris control RGB Black balance Configurable open/close iris RGB Flare control limits RGB Gamma control Detail ND and CC filter control Detail dependency Master Black Pedestal Saturation Iris control Auto-Knee Bars Configurable Panel lockout Gain steps White balance presets and fixed temperatures COMPATIBLE CAMERA TYPES Sony DXC-D30 DXC-D35 DXC-D50 DXC-D55 BVP-550 BVP-570 BVP-950 BVP-E10 BVP-E30 HDC-1500 HDC-1550 HDC-1400 HDC-1450 HSC-100 HXC-300 PDW-700 PDW-F800 PMW-EX3 Ikegami HL-55 HL-59 HL355 HK-388 HK-399 HC-400 Thomson TTV1657D LDK100 LDK200 LDK300 LDK400 LDK500 LDK4000 LDK6000 LDK8000 LDK8000 Elite Hitachi Z-3k SK900 SK1000-H JVC KY-D29 Panasonic AJ-HPX2000 DATA TRANSMITTER Frequency bands UHF (VHF option) Tuning range 450 to 470MHz (optional wider bandwidth to special order) Frequency selection 6.25kHz step size Occupied bandwidth 12.5 / 20 / 25kHz (other bandwidths selectable) Modulation GMSK Data rate 4800 to Baud TX output power 2 or 5 Watt versions Size and weight 1U rack mount, 460mm deep, 2.75kg Power 110 to 260 VAC DATA RECEIVER RF specifications Compatible with the transmitter Camera selection and RF channel Software control or Internal selector switches (model dependant) Size and weight Alternative receiver versions according the camera model Power +12VDC from camera battery OEM OCP CONTROL The Gigawave Camera Control System may also be used with OEM OCPs. Currently supported types are Sony RCP-750, RCP-1500 and Grass Valley OCP-400 (for other types of OEM OCP please contact Gigawave). sales@vislink.com 12/14 ENG RD Rev Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

14 FocalPoint Wireless Camera Control System The FocalPoint is Vislink's latest wireless camera control system providing comprehensive control functions for today s broadcast needs. The system can control multiple camera and operator control panel combinations, with future-proof Ethernet control. Designed to work with the majority of camera manufacturers the control system can support one-way or return communication. The innovative, weatherproof outdoor unit provides operational flexibility with the freedom to move beyond the studio or truck. The unit also supports copper or fibre optic connectivity. Key Features Allows control of up to six cameras by multiplexing six control panels over single RF link. Supports one-way or return data communication to camera Three CRIU units can be linked together to allow control of 18 cameras using one RF head 2.2 Colour LCD display with intuitive menu for easy configuration Front panel LED shows data activity / system health diagnostic information Compact UHF telemetry transmitter unit with copper and fibre connectivity Unit configurable via the front panel or by a web browser Typical Applications Event Coverage Newsgathering Sports Coverage

15 SPECIFICATIONS TRANSMITTER PARAMETERS Frequency Band UHF (VHF OPTION) Tuning Range 440 MHz 476 MHz (Other bands available on request) Bandwidth 12.5 khz / 20.0 khz / 25.0 khz Modulation GMSK MECHANICAL PARAMETERS Dimensions Rack 483mm (W) x 303mm (H) x 44mm (D) (19 x 1U) Headunit 130mm (W) x 82mm (H) x 210mm (D) Weight Rack 2.45kg Headunit 1.54kg PRIME POWER PARAMETERS Power Supply 100V 240V AC 50/60 hz Power Output Configurable in 0.1 W steps COMPATIBLE CAMERA TYPES Sony RCP1500/153 Hitachi RU1500 Other manufacturers to be added with firmware upgrade sales@vislink.com 02/15 ENG RD00#### Rev Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

16 Video Parameters UltraLite 4K UHD wireless camera encoder module The UltraLite utilises state of the art HEVC encoding to make 4K UHD wireless live video a reality today. Being the world s first, the UltraLite is Audio a lightweight Encoder module that can be Audio attached Inputs to any existing wireless camera system enabling live ISO (HE-AAC) 8 Embedded transmission pairs of Ultra High Definition video. Being so lightweight, the UltraLite is attachable to a variety Outputs of 4K UHD camera such as the Sony F55. Vislink will provide a custom made mounting solution ASI for your camera type. Along with Vislink s UltraDecoder, the UltraLite provides Environment a complete & Physical end to end live 4K UHD, easy to implement, cost effective wireless video solution. Key Features Capable of allowing 4K UHD live wireless video using existing RF infrastructure Compact and Lightweight Utilises latest HEVC advanced encoding techniques UltraLite system comprises of a UltraLite module and UltraDecoder to allow an end to end 4K UHD solution Typical Applications Live wireless 4K UHD transmission Sports Coverage Event Coverage

17 Video Parameters Video Encoder Profiles 4K UHD Main 10-8/10bits Main /10 bits / Mbps Video Inputs 2 SFP+ module slots supporting electrical and optical interfaces carrying: 4 x 3G-HDSDI (UHD) Video Formats 4K UHD 2160p / / 24 / 25 / / 30 / 50 / / 60 Audio Parameters Audio Encoder ISO (HE-AAC) 8 pairs Audio Inputs Embedded Outputs ASI Latency System Latency Approx. 900ms 1Sec Note: Suitable for applications such as Camera back, Airborne and On-boards Environment & Physical Dimensions 111.5mm width 33mm height 191mm deep Temperature Operational: 0 C to +50 C (32 F to 122 F) Storage: 20 C to +70 C ( 4 F to 158 F) Power 10-36V DC Less than 25 Watts Weight 570g All dimensions in mm 16-Apr-16 Rev 1.0 learn more at vislink.com

18 UltraDecoder HEVC Decoder Being the lightest in the world, the Vislink UltraDecoder is the new 1RU, ½ rack HEVC & 4K UHD capable decoder. The Product uses the latest advanced HEVC decoding techniques to offer up to 50% bit rate reduction compared to H.264, resulting in the delivery of high quality video at low bit rates. Along with Vislink's UltraCoder this product provides a complete end to end HEVC & 4K UHD encode and decode solution. Key Features Capable of decoding 4K UHD, HD & SD video The product uses the latest advanced HEVC decoding techniques to offer 50% bit rate reduction compared to H.264 The ability to decode one 4K UHD or 1 HD video channel The UltraDecoder can be used with the UltraCoder to provide a complete end to end encode and decode solution Typical Applications SNG ENG IP Networks

19 SPECIFICATIONS VIDEO PARAMETERS Video Decoder Profiles 4K UHD Main 10-8/10bits 4.2.0,1.0-50Mbps HD Main 10-8/10bits Mbps SD Main 0.5-6Mbps Video Formats 480i / i / p / 50/ / i / 50/ / p / / 24 / 25 / / 30 / 50 / / p / / 24 / 25 / / 30 / 50 / / 60 IP INTERFACES VIDEO Type: 10 / 100 / 1000 Base T Ethernet Protocol IEEE802.3 Ethernet Encapsulation for ASI RTP (RFC2250), ARP, IPv4, IGMPv2/3, TCP/UDP MultiCast AUDIO PARAMETERS Audio Decoder ISO (HE-AAC) Audio Outputs Embedded 4 pairs in SDI Embedded 4 pairs in HDMI FLEXIBILITY Remote Control Ethernet HTTP SNMP Outputs HDMI 1.4 (UHD) Mini BNC (SD & HD) X 2 RJ45 (IP) BNC (ASI) ENVIRONMENT & PHYSICAL Dimensions 210mm wide by 350mm deep (8.27 wide by deep) 1RU, ½ rack Weight 1.9kg approx (4 lbs) Temperature Operational: 0 C to +50 C(32 F to 122 F) Storage: 20 C to +70 C ( 4 F to 158 F) Power <100VA 90 to 264 Vac 50/60 Hz sales@vislink.com RD Rev 4 22/01/16 ENG 2015 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

20 L3211 Barrel Booster Barrel Booster Overview The L3211 Barrel Booster has been specifically tailored for wireless camera back applications. Designed to fit directly onto the RF output from the Link range of transmitters, this unit is small, lightweight and easy to use. This amplifier includes ALC (Automatic Level Control) in order to provide a constant RF output power for all transmitter power level settings. The L3211 has a wide DC operating range (9-28V) and can be powered via the RF input connector* or using the Lemo power cables supplied with the unit. These power cables allow the option to connect to the Lemo power socket on the wireless transmitter or to the D-Tap adaptor from an IDX or Anton Bauer battery plate. Incorporating LDPD (Link Digital Pre-Distortion) for improved adjacent channel rejection, integral harmonic filtering and a power save mode this amplifier is a must have addition to any wireless camera system where extended range is required. * Switchable phantom power to the L3211 barrel booster is provide in the L RF module. Features Boosts RF transmitter power for extended range. Provides optimal trade-off between transmit power, DC power consumption and spectral efficiency. Small, light-weight & robust construction. Designed to mate directly to the Link range of camera back transmitters. Incorporates LDPD (Link Digital Pre-Distortion) for improved adjacent channel rejection. Includes input and output RF harmonic filters to ensure regulatory compliance. ALC (Automatic Level Control) maintains a constant RF output for all transmitter settings. Can also be operated as a fixed gain power amplifier for user defined RF output powers. RF output fully protected against mis-match damage. Powered via RF input connector or external Lemo connector. Power save mode when RF muted. Wide DC (9-28V) operating range. Tri-colour LED indicates unit status and RF output mode setting. P U B L I C S A F E Y VISLINK News and Entertainment

21 Specifications Electrical At 20±5 C ambient Parameter Conditions Min Typ Max Units Comment Frequency Range L MHz L MHz Does not include LDPD RF Output Power ALC Mode +28 (0.63) 28.75(0.75) +30 (1.0) dbm (W) RF Input Power Range ALC Mode +10 (10) +24 (250) dbm (mw) Gain Fixed Gain Mode db Spectral Regrowth Adjacent Channel -40 dbc EN Alternate Channe -46 Spurious 25MHz 1GHz 0.25(-36) nw(dbm) EN GHz 27GHz 1(-30) Return Loss 10 db RF Input Damage Level CW +27 (0.5) dbm (W) Pulsed +36 (4) Static Protection Direct Discharge 8 kv IEC Air Discharge 15 Temperature Rise Above Ambient 32 ºC IEC Supply Voltage 9 28 V Power Consumption RF OFF 7.5 W Compliance Standard Class/Category Version ETSI EN Category 1 V1.1.2 ETSI EN Class B V1.1.1 Optional power cables are available as listed below RF ON 14 W Barrel Booster ALC Power Cable (Lemo straight) Barrel Booster ALC Power Cable (IDX D-TAP) Barrel Booster ALC Power Cable (Anton Bauer P-TAP) Barrel Booster ALC Power Cable (Lemo right-angle) Barrel Booster ALC Power Cable (XLR 3pin) Barrel Booster Power Cable (Fixed Gain Lemo) Barrel Booster Power Cable (Fixed Gain IDX D Tap) Environmental Operating Temperature (Portable Equipment) -10 C to +50 C Storage Temperature -20 C to +80 C Humidity 95% Non-Condensing IP Rating 54 Mechanical RF/DC Input Connector 50Ω N Type (M) RF Output Connector 50Ω N Type (F) Power Connector 6-Pin Lemo Socket Phantom Power Applied to RF Input Connector Weight 0.32Kg Length 106mm (inc. connectors) Diameter 62mm Status Indicator Green (DC Power/ALC OK) Orange (DC Power OK/Fixed Gain) Power Connector 6-Pin Lemo Socket L3211 Socket EEG.OB.306 CLV Mating Plug FGG.0B.306 CLA (straight) FHG.0B.306 CLA (right-angle) Pin Out 1 & 2: GND, 3 & 4: +VE, 5 & 6: NC Note: When operating the barrel booster in the Fixed Gain mode the RF output power is no longer controlled by the barrel booster s ALC and therefore it is the operator s responsibility to ensure that the RF drive into the barrel booster is at an appropriate level not to cause over-drive or damage and to maintain regulatory compliance Barrel Booster Power Cable (75cm un-terminated) Hot surface, do not touch barrel booster heat sink surface during operation Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. Document 04 / 02 /

22 L3025 DownConverter Features A key component of the Link Wireless Camera System, but also suitable for use in third party systems Performance optimized for use with DVB-T/LMS-T/SCM-Q COFDM reception Very high dynamic range for weak signal reception with colocated high-level signals Longer cable runs between down-converter and receiver are permissible in high gain mode Front-end filter reduces overloading from UHF transmissions Antenna port protected against damage from highpower transmitters and static discharge Small and light-weight to allow easy pole mounting Full protection against water and dust (IP65) for outdoor installations Tri-colour LED indicates unit status and gain mode setting L9972 Mounting Bracket

23 Specifications General Antenna Input:... N-Type (F) 50Ω UHF Output:... BNC (F) 75Ω Noise Figure:.... <3dB* Phase Noise: 10kHz offset Spurious:... <-60 dbm O1P3:.... >26 dbm OP1dB:.... >14 dbm Image/Half-IF Rejection:.. >60dBc Compliance: CE (EN EN & ES202239) FCC. Static Discharge (IEC ) Model Frequency Gain Mode Physical (Excluding Bracket) Normal High Dimensions Weight L GHz 28 db. (typ.) 43 db. (typ.) H mm [6"] W - 65 mm [2.6"] L GHz 30 db. (typ.) 45 db. (typ.) D - 25 mm [1"] L E GHz 26 db. (typ.) 41 db. (typ.) L GHz 26 db. (typ.) 41 db. (typ.) L E* GHz 30 db. (typ.) 41 db. (typ.) L GHz 24 db. (typ.) 39 db. (typ.) L GHz 26 db. (typ.) 41 db. (typ.) 250g [0.56 lbs] Environmental: Temperature:. 10 C to +55 C IP65 [14 F to 122 F] Power supply: to 24V DC (via UHF output connector) Power consumption:... up to 5W (High gain mode) L GHz 38 db. (typ.) 53 db. (typ.) L GHz 38 db. (typ.) 53 db. (typ.) Other bands are available, contact us with your requirements H m[6.1"] W - 65 mm [2.6"] D - 25 mm [1"] 300g [0.66 lbs] The L3025 is powered via the output cable. A tri-colour LED indicates unit status: GREEN Low Gain Setting, ORANGE High Gain Setting, RED Unit Error. In the low gain mode, the down-converter provides sufficient gain to compensate for up to 20dB of cable loss between the down-converter and the receiver. Typically, with good quality cable, this corresponds to up to 100m. In the high gain mode this can be extended to 150m. *Note: The L E noise figure is specified as <5.5dB above 3.7GHz Gain Switch Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. Doc L3025 V16

24 PHASE ENGENHARIA Wireless Camera Systems EXCLUSIVE REPRESENTATIVE:

25 PHASE Engenharia Ind. e Com. Ltda. Av. Olegário Maciel 231, Lojas 101 a 105 Barra da Tijuca Rio de Janeiro, RJ CEP Tel Av. Ibirapuera 2.907, Conj. B306 & 7 - Ed. Conv. Corp. Plaza Torre C Indianópolis São Paulo-SP CEP Tel phase@phase.com.br