Supports The product is compliant with Chapter 3.

Transcription

1 Xerox Accessibility Section 508 Conformance Report Voluntary Product Accessibility Template (VPAT ) V2.0 Xerox VersaLink B405 MFP Learn more about Xerox and Section 508 at our website: Summary Table Voluntary Product Accessibility Template (VPAT ) Chapter 3: Functional Performance Criteria Chapter 4: Hardware The product is compliant with Chapter 3. with exceptions Compliant with minor exceptions concerning volume, input controls, and status indicators Chapter 5: Software The product does not support the software criteria set forth Chapter 6: Support Documentation and Services Software Version Evaluated: Firmware version: The centralization of documentation, training, and support services for most Xerox products allows us to achieve compliance across the corporation. Evaluation Methods Used: Testing based on general product knowledge, similar to another evaluated product

2 Chapter 3: Functional Performance Criteria (FPC) Without Vision At least one mode of operation that does not require user vision is available With Limited Vision At least one mode of operation that enables users to make use of limited vision is available Without Perception of Color Without Hearing At least one mode of operation that does not require user perception of color is available One mode of operation that does not require user hearing is available With Limited Hearing One mode of operation that does not require user limited hearing is available Without Speech Speech is not required for this product With Limited Manipulation With Limited and Strength With limited Language, Cognitive, and Learning Abilities At least one mode of operation that does not require fine motor control or simultaneous manual operations is available At least one mode of operation that does not require limited reach and limited strength is available Features are provided for individuals with limited cognitive, language, and learning abilities for simpler and easier use Chapter 4: Hardware 402 Closed Functionality General Speech-Output Enabled Information Displayed On- Screen This product does not have a display screen Transactional Outputs There is no transactional output Speech Delivery Type and Coordination There is no speech output User Control There is no voice output Braille Instructions There is no speech output Volume Private Listening There is no voice output Non-private Listening There is no voice output Characters on Display Screens Characters on Variable Message Signs 403 Biometrics with exceptions All text is Sans Serif but text is 4mm This product does not have variable message signs 2 of 6

3 403.1 General Biometric forms are not used. 404 Preservation of Information Provided for Accessibility General 405 Privacy The device does not transmit or conduct information or communication General 406 Standard Connections General 407 Operable Parts Contrast Input Controls The same degree of privacy of input and output is provided to all individuals At least one type of connection conform to industry standard non-priority format. The product provides keys and controls with contrast visually from background surfaces Tactilely Discernible Input controls are operable by touch and tactilely discernible without activation Alphabetic Keys Numeric Keys The product does not include any mechanically operated controls or keys A 12-key ascending or descending keypad layout is not provided Key Repeat Key repeat is not supported Timed Response with exceptions Operation Tickets, Fare Cards, and Keycards Height and Depth Vertical Reference Plane Vertical Plane for Side Vertical Plane for Forward Side Unobstructed Side Alert message appears visually in the LUI to provide the timed response but not by sound Controls do not require simultaneous use of two hands, and the force to activate hand-operated controls is less than 5 lbs. Tickets, Fare card or keycard is not used in product At least one of each type of operable part of stationary ICT at a height conforming to or is available Where a side reach is provided, the vertical reference plane is 48 inches (1220 mm) long minimum. Where a forward reach is provided, the vertical reference plane is 30 inches (760 mm) long minimum Where a side reach requires a reach over a portion of the ICT, the height of that portion of the ICT is 34 inches (865 mm) maximum. Where the operable part is located 10 inches (255 mm) or less beyond the vertical reference plane, the operable part is 48 inches (1220 mm) high maximum and 15 inches (380 mm) high minimum above the floor. 3 of 6

4 Obstructed Side All operable controls are within specification Forward Unobstructed Forward Obstructed Forward Operable Part Height for ICT with Obstructed Forward Knee and Toe Space under ICT with Obstructed Forward 408 Display Screens Visibility Flashing 409 Status Indicators 4 of 6 Where a forward reach allows a reach over a portion of the ICT, the height of that portion of the ICT shall be 34 inches (865 mm) maximum The operable part is 48 inches (1220 mm) high maximum and 15 inches (380 mm) high minimum above the floor maximum allowable forward reach to an operable part is 25inches All operable parts are within specification There are no operable controls At least one display screen is visible from a point located 40inces above floor space This product supports no more than three flashes in any one-second period General with exceptions Status indicators provide visual only 410 Color Coding General 411 Audible Signals General 412 ICT with Two-Way Voice Communication Volume Gain Volume Gain for Wireline Telephones Volume Gain for Non- Wireline ICT Interference Reductions and Magnetic Coupling Color coding and additional means of unique identification (e.g., text and symbols) are used. Audible signals and additional means of unique identification (e.g., cues) are used. This product does not use analog or digital wireline telephones. The device does not support bi-directional voice communication over a telephone line Wireless Handsets The product does not produce electromagnetic fields Wireline Handsets The product does not produce electromagnetic fields Digital Encoding of Speech This product does not support digital encoding of speech Real-time Text Functionality This product does not support real-time functionality Called ID Caller ID and/or similar telecommunications are not present Video Communication The product is not a video or multi-media product. 413 Closed Caption Processing Technologies

5 Decoding and Display of Closed Captions Pass-Through of Closed Caption Data 414 Audio Description Processing Technologies The product is not a video or multi-media product. The device does not transmit or conduct information or communication Digital Television Tuners The product is not a video or multi-media product Other ICT The product is not a video or multi-media product. 415 User Controls for Captions and Audio Descriptions Caption Controls The product is not a video or multi-media product Audio Description Controls The product is not a video or multi-media product. Chapter 6 Support Documentation and Services Scope 602 Support Documentation Accessibility and Compatibility Features Electronic Support Documentation Alternate Formats for Non-Electronic Support Documentation 603 Support Services Information on Accessibility and Compatibility Features Accommodation of Communication Needs XCA is provided to the customer with the user guide Website provides user guide User guide is provided as an E-book to the customer XCA is provided to the customer with the user guide Customer support service contact details are available in the user guide and on website. Specific support for persons with disability is not provided 5 of 6

6 What is the Voluntary Product Accessibility Template (VPAT)? The purpose of the Voluntary Product Accessibility Template is to assist Federal contracting officials in making preliminary assessments regarding the availability of commercial Electronic and Information Technology products and services with features that support accessibility. The first table of the Template provides a summary view of the Section 508 Standards. The subsequent tables provide more detailed views of each subsection. There are three columns in each table. In the subsequent tables, the first column contains the numbered paragraphs of the subsections. The second column describes the supporting features of the product with regard to that paragraph. The third column contains any additional remarks and explanations regarding the product. For additional information on these and other accessories, contact your Xerox sales representative or call ASK- XEROX ( ) Xerox Corporation. All rights reserved. Xerox and Xerox and Design are trademarks of Xerox Corporation in the United States and/or other countries. BR22162 Other company trademarks are also acknowledged. Document Version: 1.0 (January 2017). Voluntary Product Accessibility Template and VPAT are registered service marks of the Information Technology Industry Council (ITI). 6 of 6