MODEL NO.: N156BGE SUFFIX: L52

Size: px

Start display at page:

Download "MODEL NO.: N156BGE SUFFIX: L52"

Anabel West
5 years ago
Views:

1 Doc. Number Tentative Specification Preliminary Specification Approval Specification MODEL NO. N56BGE SUFFIX L52 Customer TSB APPROVED BY SIGNATURE Name / Title Note Please return copy for your confirmation with your signature and comments. Approved By Checked By Prepared By CST CST CST Version 3. 2 March 2 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

2 CONTENTS. GENERAL DESCRIPTION...4. OVERVIEW GENERAL SPECIFICATINS MECHANICAL SPECIFICATIONS CONNECTOR TYPE ABSOLUTE MAXIMUM RATINGS ABSOLUTE RATINGS OF ENVIRONMENT ELECTRICAL ABSOLUTE RATINGS TFT LCD MODULE ELECTRICAL SPECIFICATIONS FUNCTION BLOCK DIAGRAM INTERFACE CONNECTIONS ELECTRICAL CHARACTERISTICS LCD ELETRONICS SPECIFICATION LED CONVERTER SPECIFICATION BACKLIGHT UNIT LVDS INPUT SIGNAL TIMING SPECIFICATIONS LVDS DC SPECIFICATIONS LVDS DATA FORMAT COLOR DATA INPUT ASSIGNMENT DISPLAY TIMING SPECIFICATIONS POWER ON/OFF SEQUENCE OPTICAL CHARACTERISTICS TEST CONDITIONS OPTICAL SPECIFICATIONS RELIABILITY TEST ITEM PACKING MODULE LABEL CARTON PALLET HANDLING PRECAUTIONS STORAGE PRECAUTIONS OPERATION PRECAUTIONS...25 Appendix. EDID DATA STRUCTURE...26 Appendix. OUTLINE DRAWING...29 Version 3. 2 March 2 2 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

3 REVISION HISTORY Version Date Page Description 3. Feb.22, 2 All Spec Ver.3. was first issued. Version 3. 2 March 2 3 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

4 . GENERAL DESCRIPTION. OVERVIEW N56BGE-L52 is a 5.6 TFT Liquid Crystal Display module with LED Backlight unit and 4 pins LVDS interface. This module supports 366 x 768 FHD model and can display 262,44 colors. The optimum viewing angle is at 6 o clock direction..2 GENERAL SPECIFICATINS Item Specification Unit Note Screen Size 5.6 diagonal Driver Element a-si TFT active matrix - - Pixel Number 366 x R.G.B. x 768 pixel - Pixel Pitch.252 (H) x.252 (V) mm - Pixel Arrangement RGB vertical stripe - - Display Colors 262,44 color - Transmissive Mode Normally white - - Surface Treatment Hard coating (3H), Anti-Glare - - Luminance, White 22 Cd/m2 Power Consumption Total W cell.56 W (Max.), BL 4.46W(Max.) () Note () The specified power consumption (with converter efficiency) is under the conditions at VCCS = 3.3 V, fv = 6 Hz, LED_VCCS = Typ, fpwm = 2 Hz, Duty=% and Ta = 25 ± 2 ºC, whereas mosaic pattern is displayed. 2. MECHANICAL SPECIFICATIONS Item Min. Typ. Max. Unit Note Horizontal (H) mm Module Size Vertical (V) mm () Thickness (T) - 4. mm Bezel Area Horizontal mm Vertical mm Active Area Horizontal mm Vertical mm Weight g Note () Please refer to the attached drawings for more information of front and back outline dimensions. 2. CONNECTOR TYPE Pin4 Pin Please refer Appendix Outline Drawing for detail design. Connector Part No I-PEX E-2, Tyco# , or equivalent User s connector Part No I-PEX T-,Tyco# , or equivalent Version 3. 2 March 2 4 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

5 3. ABSOLUTE MAXIMUM RATINGS 3. ABSOLUTE RATINGS OF ENVIRONMENT Item Symbol Min. Value Max. Unit Note Storage Temperature T ST ºC () Operating Ambient Temperature T OP +5 ºC (), (2) Note () (a) 9 %RH Max. (Ta <= 4 ºC). (b) Wet-bulb temperature should be 39 ºC Max. (Ta > 4 ºC). (c) No condensation. Note (2) The temperature of panel surface should be ºC min. and 6 ºC max. Relative Humidity (%RH) Operating 4 2 Storage Range Temperature (ºC) 3.2 ELECTRICAL ABSOLUTE RATINGS 3.2. TFT LCD MODULE Item Symbol Value Min. Max. Unit Power Supply Voltage VCCS V Logic Input Voltage V IN -.3 VCCS+.3 V Note () Converter Input Voltage LED_VCCS V () Converter Control Signal Voltage LED_PWM, V () Converter Control Signal Voltage LED_EN V () Note () Stresses beyond those listed in above ELECTRICAL ABSOLUTE RATINGS may cause permanent damage to the device. Normal operation should be restricted to the conditions described in ELECTRICAL CHARACTERISTICS. Version 3. 2 March 2 5 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

6 4. ELECTRICAL SPECIFICATIONS 4. FUNCTION BLOCK DIAGRAM LVDS Display Data & Clock BIST VCCS GND Data EDID CLK EDID INPUT CONNECTOR TIMING ONTROLLER DC/DC CONVERTER & REFERENCE VOLTAGE GENERATOR EDID EEPROM SCAN DRIVER IC TFT LCD PANEL DATA DRIVER IC V EDID Converter LED CONVERTER BACKLIGHT UNIT Input Signals Version 3. 2 March 2 6 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

7 4.2. INTERFACE CONNECTIONS PIN ASSIGNMENT Pin Symbol Description Remark NC No Connection (Reserve) 2 VCCS Power Supply (3.3V typ.) 3 VCCS Power Supply (3.3V typ.) 4 VEDID DDC 3.3V power 5 NC No Connection (Reserved for CMO test) 6 CLKEDID DDC clock 7 DATAEDID DDC data 8 Rxin- LVDS differential data input 9 Rxin+ LVDS differential data input R-R5, G VSS Ground Rxin- LVDS differential data input 2 Rxin+ LVDS differential data input 3 VSS Ground 4 Rxin2- LVDS Differential Data Input 5 Rxin2+ LVDS Differential Data Input 6 VSS Ground 7 RxCLK- LVDS differential clock input 8 RxCLK+ LVDS differential clock input 9 VSS Ground 2 NC No Connection (Reserve) 2 NC No Connection (Reserve) 22 VSS Ground 23 NC No Connection (Reserve) 24 NC No Connection (Reserve) 25 VSS Ground 26 NC No Connection (Reserve) 27 NC No Connection (Reserve) 28 VSS Ground 29 NC No Connection (Reserve) 3 NC No Connection (Reserve) 3 LED_GND LED Ground 32 LED_GND LED Ground 33 LED_GND LED Ground 34 NC No Connection (Reserve) 35 LED_PWM PWM Control Signal of LED Converter 36 LED_EN Enable Control Signal of LED Converter 37 NC No Connection (Reserve) 38 LED_VCCS LED Power Supply 39 LED_VCCS LED Power Supply 4 LED_VCCS LED Power Supply G~G5, B, B B2-B5,HS,VS, DE LVDS CLK Note () The first pixel is odd as shown in the following figure. Version 3. 2 March 2 7 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

8 , (odd),2 2, 2,2 3,,3 (even) (odd),4 (even) Pitch,Xmax Pitch Ymax, Ymax, Xmax Version 3. 2 March 2 8 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

9 4.3 ELECTRICAL CHARACTERISTICS 4.3. LCD ELETRONICS SPECIFICATION Parameter Symbol Value Min. Typ. Max. Unit Note Power Supply Voltage VCCS V ()- Ripple Voltage V RP mv ()- Inrush Current I RUSH A (),(2) Power Supply Current Mosaic ma (3)a lcc Black ma (3)b Note () The ambient temperature is Ta = 25 ± 2 ºC. Note (2) I RUSH the maximum current when VCCS is rising I IS the maximum current of the first ms after power-on Measurement Conditions Shown as the following figure. Test pattern black V Q 2SK475 FUSE C3 VCCS (LCD Module Input) R uf 47K (High to Low) (Control Signal) SW +2V R2 K Q2 2SK47 VR 47K C2 C.uF uf VCCS rising time is.5ms Version 3. 2 March 2 9 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

10 Note (3) The specified power supply current is under the conditions at VCCS = 3.3 V, Ta = 25 ± 2 ºC, DC Current and f v = 6 Hz, whereas a power dissipation check pattern below is displayed. a. Mosaic Pattern b. Black Pattern Active Area Active Area Version 3. 2 March 2 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

11 4.3.2 LED CONVERTER SPECIFICATION Parameter Symbol Value Min. Typ. Max. Unit Note Converter Input power supply voltage LED_Vccs V Converter Inrush Current ILED RUSH A () EN Control Level PWM Control Level V Backlight Off -.5 V V PWM Low Level -.5 V PWM Control Duty Ratio PWM Control Permissive Ripple Voltage - % % 5 - % % VPWM_pp - - mv mv PWM Control Frequency f PWM 9-2K Hz Hz LED Power Current ILED ILED ma (4) Note () ILED RUSH the maximum current when LED_VCCS is rising, ILED IS the maximum current of the first ms after power-on, Measurement Conditions Shown as the following figure. LED_VCCS = Typ, Ta = 25 ± 2 ºC, f PWM = 2 Hz, Duty=%. LED_VCCS(Typ) Q IRL333 FUSE C3 (LED Converter Input) R uf 47K (High to Low) (Control Signal) SW=24V LED_VCCS(Typ) R2 K Q2 IRL333 VR 47K C2 C.uF uf Version 3. 2 March 2 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

12 VLED rising time is.5ms.5ms 9% LED_VCC V % LED_PWM V LED_EN V ms ILED Rush ILED IS ILED Note (2) If the PWM control duty ratio is less than %, there is some possibility that acoustic noise or backlight flash can be found. And it is also difficult to control the brightness linearity. Note (3) If PWM control frequency is applied in the range less than KHz, the waterfall phenomenon on the screen may be found. To avoid the issue, it s a suggestion that PWM control frequency should follow the criterion as below. PWM control frequency f PWM should be in the range ( N.33) f f PWM ( N.66) f N Integer ( N 3) f Frame rate Note (4) The specified LED power supply current is under the conditions at LED_VCCS = Typ., Ta = 25 ± 2 ºC, f PWM = 2 Hz, Duty=%. Version 3. 2 March 2 2 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

13 4.3.3 BACKLIGHT UNIT Ta = 25 ± 2 ºC Parameter Symbol Value Min. Typ. Max. Unit Note LED Light Bar Power Supply Voltage VL V LED Light Bar Power Supply Current IL ma ()(2)(Duty%) Power Consumption PL W (3) LED Life Time L BL Hrs (4) Note () LED current is measured by utilizing a high frequency current meter as shown below V L, I L Light Bar Feedback Channels LED Light Bar Note (2) For better LED light bar driving quality, it is recommended to utilize the adaptive boost converter with current balancing function to drive LED light-bar. Note (3) P L = I L V L (Without LED converter transfer efficiency) Note (4) The lifetime of LED is defined as the time when it continues to operate under the conditions at Ta = 25 ±2 o C and I L = 24 ma (Per EA) until the brightness becomes 5% of its original value. Version 3. 2 March 2 3 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

14 4.4 LVDS INPUT SIGNAL TIMING SPECIFICATIONS 4.4. LVDS DC SPECIFICATIONS Parameter Symbol Value Min. Typ. Max. LVDS Differential Input High Threshold V TH(LVDS) mv LVDS Differential Input Low Threshold V TL(LVDS) mv Unit Note (), V CM =.2V () V CM =.2V LVDS Common Mode Voltage V CM V () LVDS Differential Input Voltage V ID - 6 mv () LVDS Terminating Resistor R T - - Ohm - Note () The parameters of LVDS signals are defined as the following figures. Single Ended VCM VID V Differential V TH(LVDS) V V TL(LVDS) VID LVDS DATA FORMAT CLK+ Rxin2 Rxin Rxin T/7 IN2 IN9 IN8 IN7 IN6 IN5 IN4 DE Vsync Hsync B5 B4 B3 B2 IN3 IN2 IN IN IN9 IN8 IN7 B B G5 G4 G3 G2 G IN6 IN5 IN4 IN3 IN2 IN IN G R5 R4 R3 R2 R R Signal for DCLK Cycle (T) Version 3. 2 March 2 4 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

15 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory! Version 3. 2 March 2 5 / COLOR DATA INPUT ASSIGNMENT The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for the color. The higher the binary input the brighter the color. The table below provides the assignment of color versus data input. Data Signal Red Green Blue Color R5 R4 R3 R2 R R G5 G4 G3 G2 G G B5 B4 B3 B2 B B Basic Colors Black Red Green Blue Cyan Magenta Yellow White Gray Scale Of Red Red()/Dark Red() Red(2) Red(6) Red(62) Red(63) Gray Scale Of Green Green()/Dark Green() Green(2) Green(6) Green(62) Green(63) Gray Scale Of Blue Blue()/Dark Blue() Blue(2) Blue(6) Blue(62) Blue(63) Note () Low Level Voltage, High Level Voltage

16 4.5 DISPLAY TIMING SPECIFICATIONS The input signal timing specifications are shown as the following table and timing diagram. Signal Item Symbol Min. Typ. Max. Unit Note DCLK Frequency /Tc MHz - Vertical Total Time TV TH - Vertical Active Display Period TVD TH - DE Vertical Active Blanking Period TVB TV-TVD 2 TV-TVD TH - Horizontal Total Time TH Tc - Horizontal Active Display Period THD Tc - Horizontal Active Blanking Period THB TH-THD TH-THD Tc - Note () Because this module is operated by DE only mode, Hsync and Vsync are ignored. INPUT SIGNAL TIMING DIAGRAM TVD Tv DE TH DCLK DE TC THD DATA Version 3. 2 March 2 6 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

17 4.6 POWER ON/OFF SEQUENCE The power sequence specifications are shown as the following table and diagram. Symbol Value Min. Typ. Max. Unit t.5 - ms t2-5 ms t3-5 ms t ms t ms t ms t7.5 - ms t A.5 - ms t B ms t C - - ms t D - - ms t E - - ms t F - - ms Note Power On 9% Power Off 9% t7 - Power Supply for LCD, VCCS V % t t2 t3 % t4 % - Interface Signal (LVDS Signal of Transmitter), V I - Power Supply for LED Converter, LED_VCCS V V Valid Data t5 t6 9% 9% % % t t B A tc t D - LED Converter Dimming Signal, LED_PWM V t E PWM Signal t F - LED Converter Enable Signal, LED_EN V Note () Please don t plug or unplug the interface cable when system is turned on. Note (2) Please avoid floating state of the interface signal during signal invalid period. Note (3) It is recommended that the backlight power must be turned on after the power supply for LCD and the interface signal is valid. Version 3. 2 March 2 7 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

18 5. OPTICAL CHARACTERISTICS 5. TEST CONDITIONS Item Symbol Value Unit Ambient Temperature Ta 25 2 o C Ambient Humidity Ha 5 %RH Supply Voltage V CC 3.3 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" LED Light Bar Input Current I L 96 ma The measurement methods of optical characteristics are shown in Section 5.2. The following items should be measured under the test conditions described in Section 5. and stable environment shown in Note (5). 5.2 OPTICAL SPECIFICATIONS Item Symbol Condition Min. Typ. Max. Unit Note Contrast Ratio CR (2), (5),(7) Response Time T R ms T F - 5 ms (3),(7) Average Luminance of White LAVE cd/m 2 (4), (6),(7) Red Rx x =, Y = (.589) - Ry Viewing Normal Angle (.357) - Gx (.33) - Green Color Gy Typ (.557) Typ + - Chromaticity Bx.3 (.48).3 - Blue By (.26) - (),(7) White Wx.33 - Wy Viewing Angle x Horizontal x (),(5), CR Deg. Y (7) Vertical Y White Variation of 5 Points (5),(6), W 5p x =, Y = % (7) Version 3. 2 March 2 8 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

19 Note () Definition of Viewing Angle ( x, y) Normal x = y = º y- y X- = 9º x- x x y+ 2 o clock direction y+ = 9º 6 o clock y- = 9º y- x+ X+ = 9º Note (2) Definition of Contrast Ratio (CR) The contrast ratio can be calculated by the following expression. Contrast Ratio (CR) = L63 / L L63 Luminance of gray level 63 L Luminance of gray level CR = CR () CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6). Note (3) Definition of Response Time (T R, T F ) % 9% Gray Level 63 Gray Level 63 Optical Response % Gray Level % Time T R T F ms ms Note (4) Definition of Average Luminance of White (L AVE ) Measure the luminance of gray level 63 at 5 points L AVE = [L ()+ L (2)+ L (3)+ L (4)+ L (5)] / 5 L (x) is corresponding to the luminance of the point X at Figure in Note (6) Version 3. 2 March 2 9 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

20 Note (5) Measurement Setup The LCD module should be stabilized at given temperature for 2 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 2 minutes in a windless room. LCD Module LCD Panel USB2 or equivalent CS-2Tor equivalent Center of the Screen 5 mm Light Shield Room (Ambient Luminance < 2 lux) Note (6) Definition of White Variation ( W) Measure the luminance of gray level 63 at 5 points W 5p = {Minimum [L () ~ L (5)] / Maximum [L () ~ L (5)]}*% X Test Point X= to 3 Active area Note (7) The listed optical specifications refer to the initial value of manufacture, but the condition of the specifications after long-term operation will not be warranted. Version 3. 2 March 2 2 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

21 6. RELIABILITY TEST ITEM Test Item Test Condition Note High Temperature Storage Test 6ºC, 24 hours Low Temperature Storage Test -2ºC, 24 hours Thermal Shock Storage Test -2ºC,.5hou 6,.5hour; cycles, hour/cycle High Temperature Operation Test 5ºC, 24 hours () (2) Low Temperature Operation Test ºC, 24 hours High Temperature & High Humidity Operation Test ESD Test (Operation) Shock (Non-Operating) Vibration (Non-Operating) 5ºC, RH 8%, 24hours 5pF, 33, sec/cycle Condition Contact Discharge, 8KV Condition 2 Air Discharge, 5KV 22G, 2ms, half sine wave, time for each direction of ±X,±Y,±Z.5G / -5 Hz, Sine wave, 3 min/cycle, cycle for each X, Y, Z () ()(3) ()(3) Note () criteria Normal display image with no obvious non-uniformity and no line defect. Note (2) Evaluation should be tested after storage at room temperature for more than two hour Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. Version 3. 2 March 2 2 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

7. PACKING 7. MODULE LABEL The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation. G33C6L N56BGE-L52 Rev.

22 7. PACKING 7. MODULE LABEL The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation. G33C6L N56BGE-L52 Rev. XX M G X X X 7 Y M D L N N N N (a) Model Name N56BGE-L52 (b) Revision Rev. XX, for example C, C2 etc. (c) Serial ID X X X X X X X Y M D L N N N N Serial No. Product Line Year, Month, Date CMO Internal Use Revision CMO Internal Use Serial ID includes the information as below (a) Manufactured Date Year ~9, for 2~29 Month ~9, A~C, for Jan. ~ Dec. Day ~9, A~Y, for st to 3 st, exclude I, O and U (b) Revision Code cover all the change (c) Serial No. Manufacturing sequence of product (d) Product Line -> Line, 2 -> Line 2, etc. Version 3. 2 March 2 22 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

23 7.2 CARTON Figure. 7-2 Packing Method Version 3. 2 March 2 23 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

24 7.3 PALLET Figure. 7-3 Packing Method Version 3. 2 March 2 24 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

25 8. PRECAUTIONS 8. HANDLING PRECAUTIONS () The module should be assembled into the system firmly by using every mounting hole. Be careful not to twist or bend the module. (2) While assembling or installing modules, it can only be in the clean area. The dust and oil may cause electrical short or damage the polarizer. (3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and assembly process. (4) Do not press or scratch the surface harder than a HB pencil lead on the panel because the polarizer is very soft and easily scratched. (5) If the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. Do not use Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might permanently damage the polarizer due to chemical reaction. (6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left on panel for a long time. (7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contacting with hands, legs or clothes, it must be washed away thoroughly with soap. (8) Protect the module from static electricity, it may cause damage to the C-MOS Gate Array IC. (9) Do not disassemble the module. () Do not pull or fold the LED wire. () Pins of I/F connector should not be touched directly with bare hands. 8.2 STORAGE PRECAUTIONS () High temperature or humidity may reduce the performance of module. Please store LCD module within the specified storage conditions. (2) It is dangerous that moisture come into or contacted the LCD module, because the moisture may damage LCD module when it is operating. (3) It may reduce the display quality if the ambient temperature is lower than ºC. For example, the response time will become slowly, and the starting voltage of LED will be higher than the room temperature. 8.3 OPERATION PRECAUTIONS () Do not pull the I/F connector in or out while the module is operating. (2) Always follow the correct power on/off sequence when LCD module is connecting and operating. This can prevent the CMOS LSI chips from damage during latch-up. (3) The startup voltage of Backlight is approximately Volts. It may cause electrical shock while assembling with converter. Do not disassemble the module or insert anything into the Backlight unit. Version 3. 2 March 2 25 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

26 Appendix. EDID DATA STRUCTURE The EDID (Extended Display Identification Data) data formats are to support displays as defined in the VESA Plug & Display and FPDI standards. Byte # (decimal) Byte # (hex) Field Name and Comments Version 3. 2 March 2 26 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory! Value (hex) Value (binary) Header Header FF 2 2 Header FF 3 3 Header FF 4 4 Header FF 5 5 Header FF 6 6 Header FF 7 7 Header 8 8 EISA ID manufacturer name ( CMO ) D 9 9 EISA ID manufacturer name (Compressed ASCII) AF A ID product code (N56BGE-L52) AE B ID product code (hex LSB first; N56BGE-L52) 5 2 C ID S/N (fixed ) 3 D ID S/N (fixed ) 4 E ID S/N (fixed ) 5 F ID S/N (fixed ) 6 Week of manufacture (fixed H ) 8 7 Year of manufacture (fixed H ) EDID structure version # ( ) 9 3 EDID revision # ( 3 ) Video I/P definition ( digital ) Max H image size ( 35cm ) Max V image size ( 9cm ) Display Gamma (Gamma = 2.2 ) Feature support ( Active off, RGB Color ) A 25 9 Red/Green (Rx, Rx, Ry, Ry, Gx, Gx, Gy, Gy) 26 A Blue/White (Bx, Bx, By, By, Wx, Wx, Wy, Wy) B Red-x (Rx =.67 ) 9E 28 C Red-y (Ry =.34 ) D Green-x (Gx =.32 ) 52 3 E Green-y (Gy =.598 ) 99 3 F Blue-x (Bx =.6 ) Blue-y (By =.84 ) White-x (Wx =.33 ) White-y (Wy =.329 ) Established timings Established timings Manufacturer s reserved timings Standard timing ID # Standard timing ID # 4 28 Standard timing ID # Standard timing ID # 2

27 42 2A Standard timing ID # B Standard timing ID # C Standard timing ID # D Standard timing ID # E Standard timing ID # F Standard timing ID # Standard timing ID # Standard timing ID # Standard timing ID # Standard timing ID # Standard timing ID # Standard timing ID # 8 Detailed timing description # Pixel clock ( 72.52MHz, According to VESA CVT Rev.) # Pixel clock (hex LSB first) C # H active ( 366 ) # H blank ( 6 ) A 58 3A # H active H blank ( ) B # V active ( 768 ) 6 3C # V blank ( 22 ) 6 6 3D # V active V blank ( ) E # H sync offset ( 48 ) F # H sync pulse width ("32 ) # V sync offset V sync pulse width ( 3 5 ) 35 # H sync offset H sync pulse width V sync offset V sync width 65 4 ( ) # H image size ( 344 mm ) # V image size ( 93 mm ) C # H image size V image size ( ) # H boarder ( ) 7 46 # V boarder ( ) # Non-interlaced, Normal, no stereo, Separate sync, H/V pol 7 47 Negatives Detailed timing description # # 2 Flag 74 4A # 2 Reserved # 2 FE (hex) defines ASCII string (Model Name N56BGE-L52, 75 4B ASCII) FE 76 4C # 2 Flag 77 4D # 2 st character of name ( N ) 4E 78 4E # 2 2nd character of name ( ) F # 2 3rd character of name ( 5 ) # 2 4th character of name ( 6 ) # 2 5th character of name ( B ) # 2 6th character of name ( G ) # 2 7th character of name ( E ) # 2 8th character of name ( - ) 2D # 2 9th character of name ( L ) 4C Version 3. 2 March 2 27 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

28 86 56 # 2 9th character of name ( 5 ) # 2 Ath character of name ( 2 ) # 2 New line character indicates end of ASCII string A # 2 Padding with Blank character 2 9 5A Detailed timing description # 3 9 5B # 3 Flag 92 5C # 3 Reserved 93 5D # 3 FE (hex) defines ASCII string (Vendor CMO, ASCII) FE 94 5E # 3 Flag 95 5F # 3 st character of string ( C ) # 3 2nd character of string ( M ) 4D 97 6 # 3 3rd character of string ( O ) 4F # 3 New line character indicates end of ASCII string A # 3 Padding with Blank character 2 64 # 3 Padding with Blank character 2 65 # 3 Padding with Blank character # 3 Padding with Blank character # 3 Padding with Blank character # 3 Padding with Blank character # 3 Padding with Blank character 2 6 6A # 3 Padding with Blank character 2 7 6B # 3 Padding with Blank character 2 8 6C Detailed timing description # 4 9 6D # 4 Flag 6E # 4 Reserved # 4 FE (hex) defines ASCII string (Model Name N56BGE-L52, 6F ASCII) FE 2 7 # 4 Flag 3 7 # 4 st character of name ( N ) 4E 4 72 # 4 2nd character of name ( ) # 4 3rd character of name ( 5 ) # 4 4th character of name ( 6 ) # 4 5th character of name ( B ) # 4 6th character of name ( G ) # 4 7th character of name ( E ) # 4 8th character of name ( - ) 2D 2 79 # 4 9th character of name ( L ) 4C 22 7A # 4 9th character of name ( 5 ) B # 4 Ath character of name ( 2 ) C # 4 New line character indicates end of ASCII string A 25 7D # 4 Padding with Blank character E Extension flag 27 7F Checksum EE Version 3. 2 March 2 28 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

29 Appendix. OUTLINE DRAWING Version 3. 2 March 2 29 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

30 Version 3. 2 March 2 3 / 3 One step solution for LCD / PDP / OLED panel application Datasheet, inventory and accessory!

MODEL NO.: N173FGE SUFFIX: L23

MODEL NO.: N173FGE SUFFIX: L23 Doc. Number Tentative Specification Preliminary Specification Approval Specification MODEL NO. N73FGE SUFFIX L23 Customer APPROVED BY SIGNATURE Name / Title Note Please return copy for your confirmation