Intensity Modulator with Low Drive Voltage F10

Transcription

1 Intensity Modulator with Low Drive Voltage F10 Data Sheet

2 Lumentum intensity modulators are based on the Mach-Zehnder interferometer architecture. They are manufactured using the highly reliable titanium indiffusion technology in x-cut, y-propagating lithium-niobate substrates. The F10-0 is a zero-chirped, x-cut single-drive modulator designed for high bit rate advanced metro to long haul communication systems that requires the superior performance of x-cut lithium niobate. The F10 modulator contains an integrated photo detector that may be used to set and lock the DC bias on the modulator as well as provide an estimate of the modulator output optical power. Key Features Very low drive voltage GPO (male) RF input C- and L-band operation Enhanced E/O bandwidth for up to 12.5G modulation speed Low insertion loss High extinction ratio Integrated monitor photodiode F10-0 zero-chirped modulator Integrated polarizer Surface mountable with gull-wing DC pins RoHS compliant Applications External intensity modulation from 10G to 12.5G NRZ and electrical RZ High-frequency fiber optic links Analog microwave over fiber (RoF) Instrumentation 2

3 Absolute Maximum Ratings Parameter Min Max Unit Conditions Maximum input power (electrical) 25 dbm RF-port, AC coupled Maximum input power (optical) 100 mw CW Maximum operating temperature variation rate 1 C/min Storage temperature range C Operating temperature range C Optical and Electrical Specification T op =25 C, unless otherwise specified Typical values shown unless otherwise stated Parameter Value Unit Optical Operating wavelength range C and L band Insertion loss 5 db Extinction ratio (DC) 24 db Chirp 0 nominal Optical return loss (without connectors) 45 db Electrical S 21 electro optical bandwidth (-3 dbe) 10 GHz S 11 electrical return loss 11 db RF V π voltage (@ 1 khz) 6.5 V Bias V π voltage (@ 1 khz) 5.5 V PRBS electrical drive voltage (V amp ) 4.5 V Dynamic extinction ratio 13 db Photodiode responsivity (referred to output power) - non-inverting 20 ma/w Photodiode linearity ± 10 % 3

4 Mechanical Outline 2 33 Max UNC-2B 3mm (4x) Max. 5 Flexible Zone Not Flexible Zone Typ. OUT (3x) 53 Higher resolution drawing available on request. Pinout Information Pin Name/Description Note 1 PD-C Photodiode cathode 2 PD-A Photodiode anode 3 B MZ DC bias 4 GND Ground 5 RF RF Input (GPO male) Pinout and Fiber Specification Pin RF connector Bias and PD connector Input fiber Output fiber Note GPO male Lead pins Corning / Fujikura SM15P UV/UV400 Corning SMF-28 Performance Characteristics F S21 (dbe) S11 (db) Frequency (GHz) Frequency (GHz) Electro optical response Electrical return loss 4

5 Flammability Rating The fiber pigtails are rated UL 94 V-0 (Fujikura fiber) or are compliant to ASTM D requirements (Corning fiber SMF-28) boots, loose tube and connectors are UL94 V-0 rated. RoHS Compliance Lumentum is fully committed to environment protection and sustainable development and has set in place a comprehensive program for removing polluting and hazardous substances from all of its products. The relevant evidence of RoHS compliance is held as part of our controlled documentation for each of our compliant products. RoHS compliance parts are available to order, please refer to the ordering information section for further details. Electrostatic Discharge (ESD) CAUTION STATIC SENSITIVE DEVICE OBSERVE PRECAUTIONS Caution: use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Ordering Information: For more information on this or other products and their availability, please contact your local Lumentum account manager or Lumentum directly at customer.service@lumentum.com. North America Toll Free: LITE (5483) Outside North America Toll Free: LITE (5483) China Toll Free: LITE (5483) Lumentum Operations LLC 400 North McCarthy Boulevard Milpitas, CA USA Lumentum Operations LLC Product specifications and descriptions in this document are subject to change without notice. f10-ds-oc-ae