Ver. Edi. Description Page Design by. 2015/06/ New Drawing - Yuan. 2015/08/ First Sample - Yuan

Transcription

1 TECH. CORP. SPECIFICATIONS CUSTOMER : SAMPLE CODE : SH240320T063-LAC MASS PRODUCTION CODE : PH240320T063-LAC SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 002 DRAWING NO. (Ver.) : LMD- PH240320T063-LAC (Ver:001) PACKAGING NO. (Ver.) : PKG- PH240320T063-LAC (Ver:001) Customer Approved Date: Approved Checked Designer Rex Liao Rex Liao Yuan Chang Preliminary specification for design input Specification for sample approval Headquarters: POWERTIP TECH. CORP. No.8, 6 th Road, Taichung Industrial Park, TEL: Taichung, Taiwan FAX: sales@powertip.com.tw NO.PT-A-005-8

2 History of Version Date (mm / dd / yyyy) Ver. Edi. Description Page Design by 2015/06/ New Drawing - Yuan 2015/08/ First Sample - Yuan Total: 28 Page PH240320T063-LAC Page2 SAMPLE Ver.01

3 Contents 1. SPECIFICATIONS 1.1 Features 1.2 Mechanical Specifications 1.3 Absolute Maximum Ratings 1.4 DC Electrical Characteristics 1.5 Optical Characteristics 1.6 Backlight Characteristics 1.7 Touch Panel Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics 2.4 Reference Initial code 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart 3.2 Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix LCM Drawing LCM Packaging Specifications Note : For detailed information please refer to IC data sheet : Primacy(TFT LCD): Sitronix:ST7789V PH240320T063-LAC Page3 SAMPLE Ver.01

4 1. SPECIFICATIONS 1.1 Features Main LCD panel Item Display Type LCD Type Screen size(inch) Viewing Direction Color configuration Backlight Interface Standard Value 240(R G B) * 320 Dots Normally white, Transmissive type 2.8 inch 12 O clock RGB-Strip LED Backlight 8/16-bit 80-system I/F Other(controller/driver IC) Sitronix:ST7789V THIS PRODUCT CONFORMS THE ROHS OF PTC ROHS Detail information please refer websitde : Mechanical Specifications Item Standard Value Unit Outline Dimension 55.8(W) * 75.0 (L) * 4.25 (H) mm LCD panel Touch panel Item Standard Value Unit Active Area 43.2 (W) * 57.6 (L) mm Item Standard Value Unit View Area 44.2 (W) * 58.6 (L) mm Active Area 45.2 (W) * 59.6 (L) mm PH240320T063-LAC Page4 SAMPLE Ver.01

5 1.3 Absolute Maximum Ratings Module Item Symbol Condition Min. Max. Unit System Power Supply Voltage VCC V VGH ~ VGL V Input Voltage VIN IOVCC+0.5 V Operating Temperature T OP C Storage Temperature T ST C Storage Humidity H D Ta 40 C %RH 1.4 DC Electrical Characteristics Module GND = 0V, Ta = 25 C Item Symbol Condition Min. Typ. Max. Unit Power Supply Voltage1 VCC V Input High Voltage V IH VCC - VCC V Input Low Voltage V IL - GND VCC V Output High Voltage V OH IOH=-0.1mA 0.8*VDD - VDD V Output Low Voltage V OL IOL=0.1mA GND - 0.2*VDD V Supply Current ICC VCC = 2.8V Pattern=full display * ma Note1:Maximum current display PH240320T063-LAC Page5 SAMPLE Ver.01

6 1.5 Optical Characteristics TFT LCD Module VCC = 2.8V, Ta=25 C Item Symbol Condition Min. Typ. Max. unit - Response time Tr+ Tf Ta = 25 C θx, θy = ms Note2 Top θy Viewing angle Bottom θy Left θx Deg. Note4 Right θx Contrast ratio CR Ta = 25 C θx, θy = Note3 White X Y X Color of CIE Red Y Coordinate - (With B/L&T/P) X Green Y Blue X Y Note1 Average Brightness Pattern=white display IV IF=80 ma cd/m 2 (With B/L&T/P) *1 Uniformity (With B/L&T/P)*2 B IF=80 ma % Note 1: *1 B=B(min) / B(max) * 100% *2 Measurement Condition for Optical Characteristics: a Environment: 25 ± 5 / 60 20%R.H no wind dark room below 10 Lux at typical lamp current and typical operating frequency. b Measurement Distance: 500 ± 50 (θ= 0 ) c Equipment: TOPCON BM-7 fast (field 1 ) after 10 minutes operation. d The uncertainty of the C.I.E coordinate measurement ±0.01 Average Brightness ± 4% VIEW AREA LCM 500 Colorimeter=BM-7 fast To be measured at the center area of panel with a viewing cone of 1 by Topcon PH240320T063-LAC Page6 SAMPLE Ver.01

7 luminance meter BM-7, after 10 minutes operation (module) Note2: Definition of response time: The output signals of photo detector are measured when the input signals are changed from black to white (falling time) and from white to black (rising time), respectively. The response time is defined as the time interval between the 10% and 90% of Amplitudes. Refer to figure as below: "White" "Black" "White" Signal (Relative value) 100% 90% 10% 0% Tr Tf Note3: Definition of contrast ratio: Contrast ratio is calculated with the following formula Photo detector output when LCD is at White state Contrast ratio (CR) = Photo detector output when LCD is at Black state Note4: Definition of viewing angle: Refer to figure as below: θ X = θ Y = 0 Φ = 270 θ X - = 90 X - θ Y - θ Y + θ X - θ X + Y + 12H Φ = 180 θ Y + = 90 Φ Φ = 90 θ X + = 90 6 H Y - Φ = 0 θ Y - = 90 X + PH240320T063-LAC Page7 SAMPLE Ver.01

8 1.6 Backlight Characteristics Maximum Ratings Item Symbol Conditions Min. Max. Unit Power Dissipation PD Ta = W Electrical / Optical Characteristics Item Symbol Conditions Min. Typ. Max. Unit Forward Voltage Average Brightness (without LCD) CIE Color Coordinate (Without LCD) Color VF V IV IF= 80 ma cd/m 2 X Y White LED-K1 LED-K2 LED-A LED-K3 LED-K4 PH240320T063-LAC Page8 SAMPLE Ver.01

9 1.7 Touch Panel Characteristics Features Item Standard Value Touch Panel Size 2.8 Touch type Input Method Output Interface IC Capacitive Touch Panel True Multi-Touch Capacitive Touch Panel True Multi-touch with up to 5 Points of Absolution I²C ST1624 Mechanical Specifications Item Standard Value Unit Active Area 45.2 (W) x 59.6 (L) mm Number of sensing channel - mm Absolute Maximum Ratings Item Symbol Condition Min. Max. Unit Operating Temperature T OP C Storage Temperature T ST C DC Electrical Characteristics Item Symbol Condition Min. Typ. Max. Unit LCM driving voltage V DD / IOV DD 25 C V Input Signal Voltage VIH 0.85 x V DD -- V DD V VIL x V DD V Optical Characteristics Item Standard Value Unit Response Time 25ms Total light transmittance 85% or more - Surface Hardness 6H - PH240320T063-LAC Page9 SAMPLE Ver.01

10 2.1 Counter Drawing LCM Mechanical Diagram * See Appendix Block Diagram TP TFT LCD PANEL LED Backlight Source Driver T - con Gate Driver ST7789V PIN PIN PH240320T063-LAC Page10 SAMPLE Ver.01

11 2.2 Interface Pin Description LCM Pin No. Symbol Function 1 LEDK1-4 Power supply for LED Backlight Cathode input 2 LEDA Power supply for LED Backlight Anode input 3 GND Signal ground.(0v) 4 IM0 MCU interface mode select, When IM0=0:16bit, When IM0=1: 8bit 5 RESET Reset input pin for TFT LCD. When RESET is L, initialization is executed. 6 CS Chip select signal, Active at L 7 RS When RS = 0: Command. When RS = 1: Display data. 8 WR Write signal input active at Low. 9 RD Read signal input active at Low. 10 GND Signal ground.(0v) 11 DB1 12 DB2 13 DB3 14 DB4 15 DB5 16 DB6 17 DB7 18 DB8 19 DB10 Bi-directional data bus 20 DB11 21 DB12 22 DB13 23 DB14 24 DB15 25 DB16 26 DB17 PH240320T063-LAC Page11 SAMPLE Ver.01

12 Pin No. Symbol Function 27 GND Signal ground.(0v) /VCC Power supply for the internal logic circuit /VCC Power supply for the internal logic circuit /VCC Power supply for the internal logic circuit. Touch Panel Pin No. Symbol Function 1 Shield ESD Ground. 2 SCL I2C serial clock. 3 SDA I2C serial data. 4 VDD Power supply. 5 RESET System reset signal input, active low. 6 INT Indicate coordinate data ready. 7 IOVDD I/O power supply. 8 NC No connection. PH240320T063-LAC Page12 SAMPLE Ver.01

13 2.3 Timing Characteristics 2.3 Timing Characteristics 8080 Series MCU Parallel Interface Characteristics: 16 / 8 bit Bus /CS RS /WR DB[17:0] (Write) /RD DB[17:0] (Read) Figure 1 Parallel Interface Timing Characteristics (8080-Series MCU Interface) VDDI=1.65 to 3.3V, VDD=2.4 to 3.3V, AGND=DGND=0V, Ta= -30 to 70 Signal Symbol Parameter Min Max Unit Description RS TAST Address setup time TAHT Address hold time (Write/Read) TCHW Chip select H pulse width TCS Chip select setup time (Write) /CS /WR /RD (ID) /RD (FM) DB[17:0] TRCS Chip select setup time (Read ID) TRCSFM Chip select setup time (Read FM) TCSF Chip select wait time (Write/Read) TCSH Chip select hold time TWC Write cycle TWRH Control pulse H duration TWRL Control pulse L duration TRC Read cycle (ID) TRDH Control pulse H duration (ID) TRDL Control pulse L duration (ID) TRCFM Read cycle (FM) TRDHFM Control pulse H duration (FM) TRDLFM Control pulse L duration (FM) TDST Data setup time TDHT Data hold time TRAT Read access time (ID) TRATFM Read access time (FM) TODH Output disable time When read ID data When read from frame memory For CL=30pF PH240320T063-LAC Page13 SAMPLE Ver.01

14 Reset Timing RESET RESET PH240320T063-LAC Page14 SAMPLE Ver.01

15 2.4 Reference Initial code ADDRH,#00H ADDRL,#11H WRITE_COMMAND DELAY DELAY ;//----display and color format setting // ADDRL,#36H WRITE_COMMAND ADDRL,#00H ADDRL,#3aH WRITE_COMMAND ADDRL,#05H ;//------ST7789V Frame rate setting // ADDRL,#B2H WRITE_COMMAND ADDRL,#0cH ADDRL,#0cH ADDRL,#00H ADDRL,#33H ADDRL,#33H ADDRL,#B7H WRITE_COMMAND ADDRL,#35H ;//-----ST7789V Power setting // ADDRL,#BBH WRITE_COMMAND ADDRL,#1fH ADDRL,#C0H WRITE_COMMAND ADDRL,#2CH ADDRL,#C2H WRITE_COMMAND ADDRL,#01H ADDRL,#C3H WRITE_COMMAND ADDRL,#11H ADDRL,#C4H WRITE_COMMAND ADDRL,#20H ADDRL,#C6H WRITE_COMMAND ADDRL,#0fH PH240320T063-LAC Page15 SAMPLE Ver.01

16 PH240320T063-LAC Page16 SAMPLE Ver.01 ADDRL,#D0H WRITE_COMMAND ADDRL,#A4H ADDRL,#A1H ;// ST7789V gamma setting // ADDRH,#00H ADDRL,#E0H WRITE_COMMAND ADDRL,#D0H ADDRL,#00H ADDRL,#14H ADDRL,#15H ADDRL,#13H ADDRL,#2CH ADDRL,#42H ADDRL,#43H ADDRL,#4EH ADDRL,#09H ADDRL,#16H ADDRL,#14H ADDRL,#18H ADDRL,#21H ADDRH,#00H ADDRL,#E1H WRITE_COMMAND ADDRL,#D0H ADDRL,#00H ADDRL,#14H ADDRL,#15H ADDRL,#13H ADDRL,#0BH ADDRL,#43H ADDRL,#55H ADDRL,#53H

17 ADDRL,#0CH ADDRL,#17H ADDRL,#14H ADDRL,#23H ADDRL,#20H ADDRH,#00H ADDRL,#29H WRITE_COMMAND PH240320T063-LAC Page17 SAMPLE Ver.01

18 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales R&D Q.A Manufactu ring Product control Purchase Inventory control Info Survey Marketing Request Inquiry Project evaluation & Design Project Validation NG Quote OK Contract Design check Sample Approval NG Sample test NG Verification OK Sample approval OK Pilot Run & Mass Product NG Pilot run & Reliability test Verification OK Specification preparation Mass production OK Inspection NG Ship Out Shipment Ship out PH240320T063-LAC Page18 SAMPLE Ver.01

19 Item Customer Sales R&D Q.A Manufact uring Product control Purchase Inventory control Info Claim Sales Service Analysis report Failure analysis Corrective action Tracking Q.A Activity 1. ISO 9001 Maintenance Activities 2. Process improvement proposal 3. Equipment calibration 4. Education And Training Activities 5. Standardization Management PH240320T063-LAC Page19 SAMPLE Ver.01

20 3.2 Inspection Specification PH240320T063-LAC Page20 SAMPLE Ver.01

21 PH240320T063-LAC Page21 SAMPLE Ver.01

22 PH240320T063-LAC Page22 SAMPLE Ver.01

23 PH240320T063-LAC Page23 SAMPLE Ver.01

24 PH240320T063-LAC Page24 SAMPLE Ver.01

25 PH240320T063-LAC Page25 SAMPLE Ver.01

26 PH240320T063-LAC Page26 SAMPLE Ver.01

27 4. RELIABILITY TEST Reliability Test Condition Low Temperature Storage Test High Temperature / High Humidity Storage Test (Ver.B01) NO. TEST ITEM TEST CONDITION High Temperature Keep in hrs Storage Test Surrounding temperature, then storage at normal condition hrs. Keep in hrs Surrounding temperature, then storage at normal condition hrs. Temperature Cycling Storage Test ESD Test Vibration Test (Packaged) Drop Test (Packaged) Keep in / % R.H duration for hrs Surrounding temperature, then storage at normal condition hrs. (Excluding the polarizer) ( mins) ( mins) ( mins) ( mins) Cycle Surrounding temperature, then storage at normal condition hrs. Air Discharge: Apply KV with times Discharge for each polarity +/- Contact Discharge: Apply V with times discharge for each polarity +/- 1. Temperature ambiance : 2. Humidity relative : % % 3. Energy Storage Capacitance(Cs+Cd) : pf % 4. Discharge Resistance(Rd) : % 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : %) 1. Sine wave Hz frequency ( min/sweep) 2. The amplitude of vibration : mm 3. Each direction (X Y Z) duration for Hrs Packing Weight (Kg) Drop Height (cm) Drop Direction : 1 corner / edges / sides each time PH240320T063-LAC Page27 SAMPLE Ver.01

28 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY If the LCD panel breaks, be careful not to get the liquid crystal to touch your skin If the liquid crystal touches your skin or clothes, please wash it off immediately by using soap and water. 5.2 HANDLING Avoid any strong mechanical shock which can break the glass Avoid static electricity which can damage the CMOS LSI When working with the module, be sure to ground your body and any electrical equipment you may be using Do not remove the panel or frame from the module The polarizing plate of the display is very fragile. So, please handle it very carefully,do not touch, push or rub the exposed polarizing with anything harder than an HB pencil lead (glass, tweezers, etc.) Do not wipe the polarizing plate with a dry cloth, as it may easily scratch the surface of plate Do not touch the display area with bare hands, this will stain the display area Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent To control temperature and time of soldering is and 3-5 sec To avoid liquid (include organic solvent) stained on LCM. 5.3 STORAGE Store the panel or module in a dark place where the temperature is 25 5 and the humidity is below 65% RH Do not place the module near organics solvents or corrosive gases Do not crush, shake, or jolt the module. 5.4 TERMS OF WARRANTY Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions Unaccepted responsibility This product has been manufactured to your company s specification as a part for use in your company s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in nuclear power control equipment, aerospace equipment, fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PH240320T063-LAC Page28 SAMPLE Ver.01

29

30