Home Theater Audio System SC-HT05. Table of contents. Operating Instructions. Model No. SC-HT07

Transcription

1 POWE8 INPUT SEECTO MUSIC AV/MOVE TUNE TUNE VIDEO IN AUDIO IN VC PEV / NEXT / ETUN VOUME DOWN UP PHONES MUTI CONTO ENTE Home Theater Audio System Operating Instructions Model No. SC-HT0 Dear customer Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. is used in the illustrations unless otherwise mentioned. Before use Table of contents IMPOTANT SAFETY INSTUCTIONS... Supplied accessories... Setup flow... Setup Speaker setup (for )... Speaker setup (for and SC-HT0)... 6 Home theater connections... 8 Other connections... 0 Settings... Operations Basic operations... Control guide... The radio... 8 Other functions... 9 Using the VC terminals (for )... Making a recording... The ESET function... emote control operation guide... Advance setup... 7 For Canada only: The word "Participant" is used in place of the word "Partner". eference Specifications... 8 Maintenance... 8 istening caution... 9 Product Service... 9 Troubleshooting guide... 0 Warranty (U.S.A.)... P PC PP QT780-P

2 IMPOTANT SAFETY INSTUCTIONS ead these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. ) ead these instructions. ) Keep these instructions. 0) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Before use ) Heed all warnings. ) Follow all instructions. ) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. ) Only use attachments/accessories specified by the manufacturer. ) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. ) Unplug this apparatus during lightning storms or when unused for long periods of time. ) efer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. QT780 CAUTION ISK OF EECTIC SHOCK DO NOT OPEN CAUTION: TO EDUCE THE ISK OF EECTIC SHOCK, DO NOT EMOVE SCEWS. NO USE-SEVICEABE PATS INSIDE. EFE SEVICING TO QUAIFIED SEVICE PESONNE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WANING: TO EDUCE THE ISK OF FIE, EECTIC SHOCK O PODUCT DAMAGE, DO NOT EXPOSE THIS APPAATUS TO AIN, MOISTUE, DIPPING O SPASHING AND THAT NO OBJECTS FIED WITH IQUIDS, SUCH AS VASES, SHA BE PACED ON THE APPAATUS. THE FOOWING APPIES ONY IN THE U.S.A. CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part of the FCC ules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: eorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ technician for help. Any unauthorized changes or modifications to this equipment would void the user s authority to operate this device. This device complies with Part of the FCC ules. Operation is subject to the following two conditions: () This device may not cause harmful interference, and () this device must accept any interference received, including interference that may cause undesired operation.

3 MUTI CONTO ENTE PEV / NEXT / ETUN VOUME DOWN UP PHONES System SC-HT0 Main unit SA-HT07 SA-HT0 Front speakers Surround speakers Please check and identify the supplied accessories. AC power supply cord System cable SB-FS97 Supplied accessories (KCBCB00006) (KHAHA000) SB-PF7 SB-PS7 Center speaker SB-PC97 SB-PC7 Subwoofer SB-WA07 SB-WA0 Setup flow Speaker setup Speakers Front Center Surround Subwoofer Home theater connections è page è page 8 DVD player (Monitor) emote control Before use FM indoor antenna AM loop antenna emote control transmitter Batteries (x ) Speaker cable(s) Sticker sheet (SA0007-) (NDAAAA0000) (EU77KD0) SC-HT0 (EU77KF0) (EE0A) ( m x ) SC-HT0 (EE0A) ( m x ) (EE0C) (0 m x ) (QCA09) Other connections Settings è page 0 Antennas DVD recorder or VC (Input source) Cassette deck CD player Game machine or other AV equipment è page Speaker output level Speaker stands Stand bases (x ) (x ) Screws (large and small) (XSN+0FN) (x 8) (XSS6+FZ) (x 8) (YQ06A-S) (YQ070-S) Sit back and enjoy the experience è page Basic operations Control guide The radio Other functions emote control operation guide Use the numbers indicated in parentheses when asking for replacement parts. In U.S.A. to order accessories, refer to Accessory Purchases on page. QT780

4 Speaker setup (for ) Front and surround speaker assembly Speaker setup (for ) Setup To prevent damage or scratches, lay a soft cloth and perform assembly on it. For assembly, use a Phillips-head screwdriver. Attach the pipe to the base. Thread the speaker cable through the base. Groove Insert the pipe. Thread the speaker cable through here. Secure the pipe to the base. arge screws (included) Ensure the screws are securely fastened by lightly tightening the left and right side screws alternately until fully tightened. (The heads of the screws protrude slightly even if you have fully tightened them.) Insert the pipe while slightly pulling on the speaker cable. The supplied stands are specially designed for attachment to Panasonic SB-FS97 front speakers and surround speakers. Only use as indicated in this setup. Attach the stand to the speaker. Ensure the stand is fastened on straight by lightly tightening the top and bottom screws alternately until fully tightened. There is no difference between the right and left speakers and stands. Small screws (included) For your reference You can enjoy good acoustics by adjusting the height of the front speaker with the height of the television so the center positions of both are approximately the same. It is usually better to make the surround speakers a little higher. QT780 You can also attach to the upper rear of the speaker. When attached to the upper rear, you can adjust the height of the speakers between 6 mm and 796 mm. When attached to the lower rear, you can adjust the height of the speakers between 968 mm and 8 mm. (Speaker height adjustment è procedure )

5 Supplied accessories Speaker stands Stand bases Screws (large and small) (x ) (x ) (x 8) (x 8) Adjust the speaker height. e.g., With the stand attached to the lower rear of the speaker Stopper screw Screw to stop mounting plate from moving or sliding below this point. Connect the speaker cables. oosen the attached speaker mounting plate screw until the attached speaker is slightly loose and adjustable. Be careful not to loosen the screw too much or the speaker may detach and fall. Adjust the position of the pipe. After adjusting the height, tighten the screw on the mounting plate securely. Connect the speaker cables. Speaker setup (for ) Setup Copper Press the speaker cable into the groove. Silver If there is any excess cable, thread it from the opening near the top of the pipe while pulling it from the bottom of the base. Fasten the speaker cable to the base. Press the speaker cable and thread between the hooks. Fit the speaker cable into the base cover groove as far as possible. Preventing the speakers from falling over Attach screw eyes (not included) to secure the speakers to a wall (diagram on the right). Obtain the screws appropriate to the walls and pillars to which the they are going to be fastened. Consult with a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper installation may result in damage to the wall or speakers. Wall QT780

6 ch Speaker setup (for and SC-HT0) Setup and connections of speakers 6QT780Speaker setup (for and SC-HT0) Setup Attach the stickers to the speaker cables. About 0 cm ( ) FONT ch FONT ch Place the speakers. e.g., Front speaker () Surround speaker () FONT ch Center speaker Front speaker () Subwoofer Front and surround speakers (The length of cables are same.) Surround speaker () FONT About 0 cm ( ) SC-HT0 Surround speakers Place on a shelf or rack. Front speakers ( left right) Place on the left and right of the at seated ear height so that there is good coherency between the picture and sound. Center speaker Place underneath or above the center of the. Aim the speaker at the seating area. Surround speakers ( left right) Place on the side of or slightly behind the seating area, higher than ear level. Subwoofer The subwoofer can be placed in any position as long as it is at a reasonable distance from the. Note that some experimentation can yield the smoothest low frequency performance. Placement near a corner can increase the apparent output level, but can result in unnatural bass. If irregular coloring occurs on your television The supplied speakers are designed to be used close to a television, but the picture may be affected with some televisions and setup combinations. If this occurs, turn the television off for about 0 minutes. The television's demagnetizing function should correct the problem. If it persists, move the speakers further away from the television. Caution Front speaker () Front speaker () Surround speaker () Surround speaker () Center speaker SC-HT0 Use the long speaker cables for the surround speakers (SB-PS7). Place the front, center, and surround speakers at approximately the same distance from the seating position. The angles in the diagram are approximate. Positioning for best effect How you set up your speakers can affect the bass and the sound field. Note the following points. Place speakers on flat secure bases. Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with a thick curtain. Note Keep your speakers at least 0 mm (/") away from the system for proper ventilation. The main unit and supplied speakers are only to be used as indicated in this manual. Failure to do so may lead to damage to the receiver and/or the speakers, and may result in the risk or fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. Do not attempt to attach these speakers to walls using methods other than those described in this manual.

7 Supplied accessories Speaker cable(s) SC-HT0 ( m x ) ( m x ) (0 m x ) Sticker sheet ( x ) Connect the speaker cables to the subwoofer. FONT () FONT () Copper Silver Attaching to a wall 0 - mm (-/6 - -/8 ) 8 - mm (/8-7/6 ) Copper Silver Copper Silver mm SC-HT0 0 mm (-9/ ) 0 mm (9-/6 ) Wall or pillar SC-HT0 FONT (6 Ω) Screw (not included) SUOUND (6 Ω) Other speaker setup options CENTE (6 Ω) SUOUND () SUOUND () CENTE The wall or pillar on which the speakers are to be attached should be capable of supporting 0 kg ( lb.) per screw. Consult a qualified building contractor when attaching the speakers to wall. Improper attachment may result in damage to the wall and speakers. () When mounting the front and surround speakers to walls, use a string (not included) to prevent them from a falling (è page ). Use of optional speaker cables are recommended for wall mounted front and surround speakers. (You can also remove the speaker cables from the pipes supplied with this system.) Subwoofer Note Never short-circuit positive (+) and negative ( ) speaker wires. Fitting optional speaker stands SC-HT0 mm, Pitch 0.8 mm Plate thickness +7 to 0 mm (9/ - /6 ) 60 mm (-/6 ) Speaker stands (not included) Observe the diameter and length of the screws and the distance between screws as shown in the diagram. The stands must be able to support over 0 kg ( lb.). The stands must be stable even if the speakers are in a high position. QT780 Speaker setup (for and SC-HT0) Setup 7

8 Home theater connections Other accessories Stereo connection cable (not included) eft ight Video connection cable (not included) Turn off all components before making any connections. To connect equipment, refer to the appropriate operating instructions. Note The included AC power supply cord is for use with this unit only. Do not use it with other equipment. Changing the digital input settings You can change the input settings for the digital terminals if necessary. Note the equipment you have connected to the terminals, then change the settings (è page ). Home theater connections Setup Subwoofer (Monitor) VIDEO IN AC power supply cord (included) Connect this cord after all other cables are connected. Household AC outlet (AC 0 V/60 Hz) 7 Ω OOP EXT OOP ANT GND CD TAPE DV / VC DVD / DVD 6CH CENTE MONITO OUT IN FM ANT AM ANT AC IN ~ TO SB-WA07 A OUT IN IN IN EC(OUT) PAY(IN) OUT IN IN FONT SUOUND SUBWOOFE DV / VC DVD AUDIO VIDEO System cable (included) To disconnect Press the catch and pull out. Catch QT780 DVD player FONT (, ) SUOUND (, ) AUDIO OUT SUBWOOFE CENTE VIDEO OUT 8

9 POWE8 INPUT SEECTO MUSIC AV/MOVE TUNE TUNE VIDEO IN AUDIO IN VC MUTI CONTO ENTE PEV / NEXT / ETUN VOUME DOWN UP PHONES Supplied accessories System cable AC power supply cord emote control transmitter Batteries (x ) (x ) (x ) (x ) Note Use digital connection to enjoy Dolby Digital or DTS. The remote control Notes on digital input This unit can decode the following signals: Dolby Digital, DTS PCM, including PCM with sampling frequencies of 96 or 88. khz It cannot decode: Other digital signals, such as MPEG Dolby Digital F signals from a laser disc player 6/6, AA, UM- S-Video cable (not included) Used to connect to the S-VIDEO IN terminal on a television. Used to connect to the S-VIDEO OUT terminal on a DVD player. Insert so the poles (+ and ) match those in the remote control. Do not use rechargeable type batteries. Use Aim at the sensor, avoiding obstacles, at a maximum range of 7 m ( feet) directly in front of the unit. emote control signal sensor Home theater connections Setup QT780 S-VIDEO 7 meters ( feet) MONITO OUT IN IN IN DV / VC DVD Transmission window () IN (DV) IN (DVD) IN OPT OPT COAXIA DIGITA IN Coaxial cable (not included) Used to connect to the DIGITA COAXIA OUT terminal on a DVD player to input audio digital signals. Note Keep the transmission window and the unit s sensor free from dust. Operation can be affected by strong light sources, such as direct sunlight, and the glass doors on cabinets. 9

10 Other connections Antennas FM indoor antenna (included) AM loop antenna (included) Adhesive tape Fix the other end of the antenna where reception is best. Click! For best reception FM outdoor antenna (not included) Disconnect the FM indoor antenna. The antenna should be installed by a competent technician. White ed Black FM outdoor antenna 7 Ω OOP EXT OOP ANT GND CD TAPE DV / VC DVD / DVD 6CH CENTE MONITO OUT IN Other connections Setup FM ANT AM ANT TO SB-WA07 A Keep the antenna cord away from DVD players and other cords. OOP ANT GND 7 Ω OUT OOPIN EXT IN IN EC(OUT) PAY(IN) OUT IN IN FONT SUOUND SUBWOOFE DV / VC DVD AUDIO VIDEO 7 Ω coaxial cable QT780 FM ANT AM ANT Antenna plug DVD recorder or VC Do not bend the optical fiber cable. 7 Ω OOP EXT FM ANT AM ANT TO SB-WA07 A OOP ANT GND CD TAPE DV / VC DVD / DVD 6CH CENTE MONITO OUT IN OUT IN IN () IN (DV) IN (DVD) IN DV VC DVD OPT OPT COAXIA IN EC(OUT) PAY(IN) OUT IN IN FONT SUOUND SUBWOOFE / AUDIO VIDEO DIGITA IN S-VIDEO MONITO OUT IN IN IN DV / VC DVD S-Video cable (not included) Used to connect to the S-VIDEO OUT terminal on a DVD recorder or VC. Stereo connection cables (not included) Video connection cables (not included) DVD recorder or VC AUDIO OUT AUDIO IN VIDEO OUT VIDEO IN Optical fiber cable (not included) Used to connect to the DIGITA OPTICA OUT terminal on a DVD recorder to input audio digital signals. 0

11 Supplied accessories FM indoor antenna (x ) AM loop antenna (x ) (Input source) Do not bend the optical fiber cable. 7 Ω OOP EXT FM ANT AM ANT TO SB-WA07 A OOP ANT GND CD TAPE DV / VC DVD / DVD 6CH CENTE MONITO OUT IN OUT IN IN () IN (DV) IN (DVD) IN DV VC DVD OPT OPT COAXIA IN EC(OUT) PAY(IN) OUT IN IN FONT SUOUND SUBWOOFE / AUDIO VIDEO DIGITA IN S-VIDEO MONITO OUT IN IN IN DV / VC DVD S-Video cable (not included) Used to connect to the S- VIDEO OUT terminal on a television. Stereo connection cable (not included) AUDIO OUT Video connection cables (not included) VIDEO OUT VIDEO IN Optical fiber cable (not included) Used to connect to the DIGITA OPTICA OUT terminal on a television to input audio digital signals. Cassette deck 7 Ω OOP EXT FM ANT AM ANT TO SB-WA07 A Stereo connection cables (not included) CD player OOP ANT GND CD TAPE DV / VC DVD / DVD 6CH CENTE MONITO OUT IN OUT IN IN () IN (DV) IN (DVD) IN DV VC DVD OPT OPT COAXIA IN EC(OUT) PAY(IN) OUT IN IN FONT SUOUND SUBWOOFE / AUDIO VIDEO DIGITA IN PAY (OUT) EC (IN) S-VIDEO MONITO OUT IN IN IN DV / VC DVD Cassette deck Other connections Setup 7 Ω OOP EXT FM ANT AM ANT TO SB-WA07 A CD OOP ANT GND TAPE DV / VC DVD / DVD 6CH CENTE MONITO OUT IN OUT IN IN () IN (DV) IN (DVD) IN DV VC DVD OPT OPT COAXIA IN EC(OUT) PAY(IN) OUT IN IN FONT SUOUND SUBWOOFE / AUDIO VIDEO DIGITA IN S-VIDEO MONITO OUT IN IN IN DV / VC DVD Optical fiber cable or coaxial cable (not included) Used to connect to the DIGITA OUT terminal on a CD player to input audio digital signals. (D-INPUT setting è page ) Stereo connection cable (not included) AUDIO OUT Game machine or other AV equipment CD player SC-HT0 7 Ω OOP EXT OOP ANT GND GAME/AUX GAME/AUX DV / VC DVD / DVD 6CH CENTE OUT MONITO IN IN FM ANT AM ANT TO SB-WA0 A OUT IN IN () IN (DV) IN (DVD) IN DV VC DVD OPT OPT COAXIA OUT IN IN IN FONT SUOUND SUBWOOFE / AUDIO VIDEO DIGITA IN Stereo connection cable (not included) AUDIO OUT Video connection cable (not included) VIDEO OUT Game machine QT780

12 Settings Adjusting speaker output level ECEIVE DVD ECODE DVD/HDD DVD ECODE DVD ANAOG 6CH VC CD DIECT TUNING DISC ENTE 0 > = 0 CH VOUME u/t y/i TUNE/BAND MUTING g h q MENU DIECT NAVIGATO PAY IST ENTE DISPAY ETUN VO /VIDEO VO DIMME SUBWOOFE CENTE FOCUS INPUT MODE TEST / / TONE/ BAANCE SEEP EVE EFFECT STEEO/ CH MIX %P MUSIC AV/MOVIE OFF Settings Setup 6 ECEIVE Switch on. TEST Output the signal. VOUME Adjust the main volume. EVE Select the speaker channel. / / Adjust the level. epeat steps and TEST Stop the test signal. QT780 C (center), S (right surround) and S (left surround) can be adjusted between 0 db and +0 db, with 0 db being the level of the front speakers. Adjust center and surround output to the same apparent level of the front speakers. For SW (subwoofer), you can select so there is no output, MIN for minimum output, a level between and 9, or MAX for maximum output. Adjust subwoofer output so it is balanced with the front speakers. Subwoofer output is easily influenced by the source. You can also change its level while playing something for better effect (è page 9).

13 Basic operations ENTE MUTI CONTO VOUME DISPAY ETUN POWE8 INPUT SEECTO MUSIC AV/MOVE TUNE TUNE ENTE PEV / NEXT / VO /VIDEO VO DIMME SUBWOOFE CENTE FOCUS VIDEO IN AUDIO IN VC ETUN DOWN UP PHONES INPUT MODE TEST / / TONE/ BAANCE SEEP EVE EFFECT POWE8 INPUT SEECTO Switch on. Select input. Start play of the source. The unit sets the TUNE CD DVD sound mode to suit TAPE VC DV/VC the input signal. SC-HT0 TUNE DVD GAME/AUX DV/VC VOUME DOWN Adjust the volume. UP STEEO/ CH MIX %P MUSIC AV/MOVIE OFF %P STEEO/ CH MIX OFF MUSIC AV/MOVIE Sound modes Adding surround effects to stereo sources Using Dolby Pro ogicii Dolby Pro ogic II processor works not only on sources recorded with Dolby Surround, but also on any stereo source. The following modes are available when using Dolby Pro ogicii. You can make fine surround settings when in the MUSIC or PANOAMA mode. (è page 9) Using the Sound Field Control () Enjoy an enhanced sound experience with greater presence and spread by using these modes with PCM or analog stereo sources. Choose from the following modes. You can make delay time setting when in the mode. (è page 9) Dolby Pro ogicii and modes remain in effect until you change them. To cancel Press [STEEO/CH MIX, OFF]. istening to multi-channel sources in stereo When surround sources are played in this mode, the sounds intended for the other speaker channels are played through the front speakers. The CH MIX mode remains in effect until you change input mode or turn off the unit. To return to surround sound Press [STEEO/CH MIX, OFF]. %P MUSIC AV/MOVIE MOVIE Use this mode when playing movie software, especially videotapes, recorded in Dolby Surround. MUSIC Adds surround effects to stereo sources. PANOAMA Sound is spread out more so you feel like you are surrounded by music. IVE Brings you up close for live stage performance and smoother vocals. POP/OCK For pop, rock, and other music that has a punch to it. VOCA For adding gloss to vocals. JAZZ Conveys the exciting and intimate atmosphere of a jazz club. DANCE For dance music and other sounds with a strong beat. PATY This mode uses the front and surround speakers so that sound is in stereo regardless of the direction you are facing. DAMA For dramas and other material where dialog is important. ACTION For action movies and other material where impact is important. SPOTS To make you feel like you were in the stadium. MUSICA For musicals and other material where music is important. GAME Enjoy gaming with more impact. MONO For monaural sound. Note When input is PCM with sampling frequencies of 96 or 88. khz, you cannot add surround effects with Dolby Pro ogicii or. When input is Dolby Digital or DTS, you cannot use. Operations QT780

14 Control guide Main unit [, MUSIC, AV/MOVIE] For selecting sound field control modes. [INPUT SEECTO] For selecting input. Standby indicator [] When the unit is connected to the AC mains supply, this indicator lights up in standby mode and goes out when the unit is turned on. [POWE 8] Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. emote control signal sensor POWE8 INPUT SEECTO MUSIC AV/MOVE TUNE TUNE VIDEO IN AUDIO IN VC [VC ] Connect equipment like video cameras. [TUNE, TUNE] For tuning the radio and selecting preset stations. Operations Display [DIGITA INPUT] Program format indicators Show the channels contained in the digital input signal. They do not light when input is analog. : Front left channel C: Center channel : Front right channel S: Surround left channel S: If the surround channel is monaural. S: Surround right channel FE (ow Frequency Effects): Deep-bass effect. [%DIGITA, dts, %PO OGICII] ight to indicate the source s input signal and decoding format used. [TUNED, M, MONO, ST ] adio indicators TUNED: A station is tuned. M: Flashes or lights during presetting. MONO: You have switched to monaural mode with [FM MODE] to improve reception. ST: A stereo FM broadcast is tuned. DIGITA INPUT C S S S FE % % DIGITA PO OGIC TUNED MONO M ST C.FOCUS SEEP CH MIX SUOUND khz MHz 00Hz khz 0kHz QT780 General display Shows the input mode, radio frequency, and other general information. [khz, MHz] Frequency unit indicators khz: AM, or PCM sampling frequency MHz: FM

15 [MUTI CONTO] For presetting radio stations and various other settings. (è page 7) [VOUME] Volume control. MUTI CONTO ENTE PEV / NEXT / VOUME [PHONES] Headphone jack Plug type:. mm (/8") stereo Sound does not come from the speakers if you connect headphones. Avoid listening for prolonged periods of time to prevent hearing damage. ETUN DOWN UP PHONES For your reference When playing video sources connected to DVD The picture remains on the screen even if you select an audio source. Manufactured under license from Dolby aboratories. Dolby, Pro ogic and the double-d symbol are trademarks of Dolby aboratories. DTS and DTS Digital Surround are registered trademarks of Digital Theater Systems, Inc. [C.FOCUS] Appears when you are using Center Focus [SEEP] Sleep timer indicator Operations Spectrum analyzer display [CH MIX, SUOUND, ] CH MIX: Appears when you are playing a multi-channel source in CH MIX mode SUOUND: Appears when you are playing through multiple channels : Appears when you are using an mode QT780

16 Control guide emote control This page describes the buttons used to control this unit. See the guide starting page for the buttons that control other units. Operations [, ECEIVE] Standby/on button. [,,,,, 6, 7, 8, 9, 0] To enter radio frequencies and channels. [ 0, ENTE] To enter two digit channels. [DISC, DIECT TUNING] To enable selection of radio stations by frequency. [TUNE/BAND] For switching between FM and AM. [, CH, ] For selecting preset radio channels. [DIMME] For dimming the unit's display. [INPUT MODE] For selecting AUTO, ANAOG or DIGITA. [STEEO/CH MIX, OFF] For selecting STEEO or CH MIX mode. To cancel surround effect. [%P II] For selecting a Dolby Pro ogicii mode: MOVIE, MUSIC or PANOAMA. [MUSIC] For selecting modes: IVE, POP/ OCK, VOCA, JAZZ, DANCE or PATY. [AV/MOVIE] For selecting modes: DAMA, ACTION, SPOTS, MUSICA, GAME or MONO. [SEEP] To start the sleep timer. ECEIVE 6 7 DIECT TUNING DISC u/t y/i TUNE/BAND MUTING g DIECT NAVIGATO DISPAY VO /VIDEO INPUT MODE DVD ECODE DVD DVD/HDD ECODE ENTE > = 0 CH VOUME MENU PAY IST ETUN DIMME SUBWOOFE CENTE FOCUS TEST h q TONE/ BAANCE SEEP EVE EFFECT STEEO/ CH MIX %P MUSIC AV/MOVIE OFF ENTE DVD ANAOG 6CH VC CD VO / / [DVD, -ANAOG 6CH] [] [DVD ECODE] [VC] [CD] SC-HT0 [DVD, -ANAOG 6CH] [] [DVD ECODE] [VC] [GAME/AUX] Input mode and remote control mode buttons. [DVD, -ANAOG 6CH] Press and hold and DVD input switches between 6-channel and -channel. [+,, VOUME] To adjust the volume. [MUTING] To mute the volume. [SUBWOOFE] For selecting subwoofer level. [TEST] To start the speaker test signal. [TONE/BAANCE] To adjust the bass, treble and front speaker balance. [EVE] Use when adjusting speaker level. [EFFECT] Use when adjusting Dolby Pro ogicii or effects. [ /, +/] First select SEEP, EFFECT, EVE, TONE or BAANCE, then press [ /] or [+/] to adjust. [CENTE FOCUS] For selecting center focus mode. QT780 6

17 MUTI CONTO operations MUTI CONTO This is an outline of the operations you can perform with the MUTI CONTO. See pages 8, 0, and for details. ENTE PEV / NEXT / ETUN Top menu Sub menu (evel ) or ENTE (evel ) (evel ) ENTE ENTE ENTE ENTE TUNE Tuner (Only when input is TUNE) TUNING Tuning mode FM MODE FM mode MANUA AUTO PESET MONO MEMOY Memory CH CH0 AUTO MEM Auto memory STAT TONE Tone BASS TEBE 0dB 0dB 0dB BAANCE Balance DIMME Dimmer OFF ON EVE EVE EVE SEEP Sleep timer OFF OPTION Option D COMP Dynamic range compression OFF STANDAD MAX A/D ATT A/D attenuator OFF ON SPECTUM Spectrum display ON OFF SETUP Setup DTS-PCM D-INPUT Digital input OFF CD () ON NONE () OPT Operations DV DVD OPT COAX ESET eset NO YES To exit EXIT Press [ETUN] to return to the level above. Be noted that this will cancel your setting. Press [] to return to the Top menu. Pressing [ETUN] or [] while the Top menu is displayed takes you immediately to EXIT. Note You can adjust the level of the bass and treble. The STEEO mode must be on and input must be either analog or PCM signals. You cannot adjust the tone if DVD ANAOG 6CH is selected. Setting is impossible if the selected menu does not appear. QT780 7

18 POWE8 INPUT SEECTO MUSIC AV/MOVE TUNE TUNE The radio DIECT TUNING DISC 0 ENTE > = 0 ECEIVE DVD ECODE DVD/HDD ENTE 0 > = 0 DIECT TUNING DISC u/t y/i TUNE/BAND MUTING g DIECT NAVIGATO DVD ECODE h ENTE DVD ANAOG 6CH VC CD CH VOUME q MENU PAY IST CH TUNE/BAND VIDEO IN AUDIO IN VC Select FM or AM. MUTI CONTO PEV / NEXT / TUNE ENTE ETUN TUNE MUTI CONTO ENTE PEV / NEXT / Select the frequency. Auto tuning starts if you press and hold the button. ETUN VOUME DOWN UP PHONES DISPAY ETUN Direct tuning Input the frequency of the station. emote control. Press [TUNE/BAND] to select FM or AM.. Press [DISC, DIECT TUNING]..Press the numbered buttons to enter the frequency. e.g. To select 07.9 MHz, press [] [0] [7] [9] If you do not press a button while the cursor is flashing, the display returns to the frequency being received. If the frequency has not been input correctly, EO will be displayed. Manual presetting Preset the stations one at a time. Preparation: Tune to the station you want to preset. MUTI CONTO. Press []..Press [<, >] to select TUNE. è [ENTE].Press [<, >] to select MEMOY. è [ENTE].Press [<, >] to select a channel. è [ENTE] ( STOED lights.) Operations QT780 8 FM mode You can improve FM reception by switching reception to monaural. MUTI CONTO. Press []..Press [<, >] to select TUNE. è [ENTE].Press [<, >] to select FM MODE. è [ENTE].Press [<, >] to select MONO. è [ENTE] Select AUTO to cancel. Automatic presetting The FM stations the unit can receive are preset in channels to 0. The AM stations the unit can receive are preset in channels to 0. (FM stations are replaced if any were preset in these channels.) Preparation: Tune to either FM 87.9 MHz or AM 0 khz. MUTI CONTO. Press []..Press [<, >] to select TUNE. è [ENTE].Press [<, >] to select AUTO MEM. è [ENTE] ( STAT lights.) è [ENTE] During automatic presetting, the memory indicator (M) flashes and the frequency scrolls. The memory indicator and channel numbers are displayed for a second when a station is preset. The last station to be preset is displayed when presetting finishes. For your reference FM stations can also be preset in the MONO mode. Selecting channels emote control Press [, CH, ]. or Press the numbered buttons. For channels to 9, press the corresponding number. For channels 0 or over, press [ 0, ENTE], then the two digits. e.g. To select channel : [ 0, ENTE] [] [] Switch the tuning mode to PESET. On the main unit MUTI CONTO. Press []..Press [<, >] to select TUNE. è [ENTE] ( TUNING lights.) è [ENTE].Press [<, >] to select PESET. è [ENTE] Select MANUA to cancel. Main unit.press [TUNE, TUNE] to select a channel. For your reference Even if the power supply cord is disconnected from the household AC outlet, the stations remain in memory for approximately two weeks.

19 Other functions SUBWOOFE 7 DIECT TUNING DISC u/t y/i TUNE/BAND MUTING g DIECT NAVIGATO DISPAY VO /VIDEO ENTE h ENTE > 0 = q MENU PAY IST ETUN VO DIMME SUBWOOFE CENTE FOCUS MUTING CENTE FOCUS Center focus (Disc where the dialogue is recorded in the center channel) You can make the sound of the center speaker seem like it is coming from within the television. emote control Press [CENTE FOCUS]. C.FOCUS lights. The factory setting is off. INPUT MODE Center Width Control "C-WDTH" You can adjust the effect of MUSIC and PANOAMA with the center width control. This adjustment helps you realize a more natural sound image when listening to music. Move sound out into the front speakers to improve the overall front image, or add sound to the center speaker to fix the center image. You can choose a level between 0 (the center speaker is dominant) and 7 (center sound is spread out). The default level is. emote control. Press [EFFECT] to select C-WDTH..Press [ /] or [+/] to adjust the effect. Dimension Control "DIMEN" You can adjust the effect of MUSIC and PANOAMA with the dimension control. You can make up for differences in the output level of the front and surround speakers. You can choose a level between and + Increase the level to move sound to the front speakers, decrease to move it to the surround speakers. The default is level 0. emote control. Press [EFFECT] to select DIMEN..Press [ /] or [+/] to adjust the effect. Delay time mode only By adjusting the delay time, the difference in the distance from the listening position to the front speakers and the distance to the surround speakers can be offset and made equal. The default is 0 ms. (0 ms 00 ms) emote control. Press [EFFECT]..Press [ /] or [+/] to adjust the delay time. Muting INPUT MODE TONE/ BAANCE SEEP EVE EFFECT STEEO/ CH MIX %P MUSIC AV/MOVIE OFF emote control Press [MUTING]. To cancel Press [MUTING] again. Muting is also canceled when the unit is turned off. TEST / / / / EFFECT The center focus cannot be used in the following case. When input signal is PCM or analog stereo. When DVD ANAOG 6CH is selected. Subwoofer level For selecting subwoofer level. emote control Press [SUBWOOFE]. Adjust the level in steps: SW MIN, SW, SW 0, SW, and SW MAX. Select SW to stop output. Note Sound can be distorted if you raise the volume while subwoofer level is high. educe subwoofer level if this occurs. Input mode This unit automatically detects whether input is digital or analog, but you can fix the input mode. emote control Press [INPUT MODE] to select "AUTO", "ANAOG" or "DIGITA". PCM/DTS fix mode In rare cases, the unit may have trouble recognizing the digital signals on discs. With the PCM signals on CDs, this may cause the beginning of a track to be cut off. Engage the PCM FIX mode if this occurs. With DTS, the signals may not be recognized at all. Engage the DTS FIX mode if this occurs. While the input source is selected: emote control. Press [INPUT MODE] to select DIGITA.Press and hold [INPUT MODE] for four seconds. The current mode is displayed. Press again to change the mode. Each time you press the button: AUTO PCM FIX DTS FIX When a FIX mode is on, the unit cannot process other signals. This may cause noise to be output. Select AUTO if this occurs. The mode returns to AUTO when you switch the unit to standby. For your reference If you are playing a DTS CD that contains both DTS and PCM, but it isn t playing properly, then do the following after step above: Use the MUTI CONTO to enter the OPTION DTS-PCM menu and select ON. If this causes noise to occur, return the setting to OFF. (This setting is effective for each digital source.) Operations QT780 9

20 POWE8 Other functions g h q MENU DIECT NAVIGATO PAY IST MUTI CONTO DISPAY ENTE ETUN / / PEV / NEXT / ENTE DIMME VO /VIDEO VO DIMME SUBWOOFE CENTE FOCUS INPUT SEECTO MUSIC AV/MOVE TUNE TUNE VIDEO IN AUDIO IN VC MUTI CONTO ETUN ENTE PEV / NEXT / ETUN VOUME DOWN UP PHONES TONE/ BAANCE SEEP INPUT MODE TEST / / TONE/ BAANCE SEEP EVE EFFECT STEEO/ CH MIX %P MUSIC AV/MOVIE OFF Operations QT780 Tone You can adjust the level of the bass and treble. MUTI CONTO. Press []..Press [<, >] to select TONE. è [ENTE].Press [<, >] to select BASS or TEBE. è [ENTE]. Press [<, >] to adjust bass/treble. è [ENTE] emote control Press [TONE/BAANCE] to select BASS or TEBE. Press [ /] or [+/] to adjust bass/treble. Note The STEEO mode must be on and input must be either analog or PCM signals. Balance You can adjust the balance of the front speakers. MUTI CONTO. Press []..Press [<, >] to select BAANCE. è [ENTE].Press [<, >] to adjust. è [ENTE] emote control Press [TONE/BAANCE] to select BAANCE. Press [ /] or [+/] to adjust. Dimmer Dim the display for better viewing in a darkened room. MUTI CONTO. Press []..Press [<, >] to select DIMME. è [ENTE].Press [<, >] to select ON. è [ENTE].Press [<, >] to select EVE, EVE or EVE. è [ENTE] emote control Press [DIMME] to select dim or bright. Dynamic range compression Change this setting to listen to software recorded with Dolby Digital at low volume (such as late at night) and maintain audio clarity. It reduces the peak level in loud scenes without affecting the sound field. MUTI CONTO. Press []..Press [<, >] to select OPTION. è [ENTE] ( D COMP lights.) è [ENTE].Press [<, >] to select OFF, STANDAD or MAX. è [ENTE] OFF: The software is played with the original dynamic range (factory setting). STANDAD: The level recommended by the producer of the software for household viewing. MAX: The maximum allowable compression (recommended for night viewing). A/D attenuator Turn the A/D attenuator on if OVEFOW lights frequently when using -channel analog input. MUTI CONTO. Press []..Press [<, >] to select OPTION. è [ENTE].Press [<, >] to select A/D ATT. è [ENTE].Press [<, >] to select ON or OFF. è [ENTE] Spectrum display Switch the spectrum analyzer display on or off. MUTI CONTO. Press []..Press [<, >] to select OPTION. è [ENTE]. Press [<, >] to select SPECTUM. è [ENTE].Press [<, >] to select ON or OFF. è [ENTE] 0

21 POWE8 D-INPUT (Digital input) Change the setting for the DIGITA IN terminals (OPT, OPT, COAXIA) on the rear of the unit if the equipment you have connected is different to that labeled. MUTI CONTO. Press []..Press [<, >] to select SETUP. è [ENTE] ( D-INPUT lights.) è [ENTE].Press [<, >] to select CD ( only),, DV or DVD. è [ENTE].Press [<, >] to select NONE ( only), OPT, OPT or COAX. è [ENTE] The factory settings are: CD: : DV: DVD: NONE OPT OPT COAX SC-HT0 : DV: DVD: OPT OPT COAX WE8 Using the VC terminals (for ) INPUT SEECTO MUSIC AV/MOVE TUNE TUNE VIDEO IN AUDIO IN VC Making a recording AUDIO OUT VIDEO OUT Video camera These terminals are convenient for equipment you want to connect only temporarily. Select "VC" for input. INPUT SEECTO Note You can allocate only one piece of equipment per terminal. So for example if you change for OPT to OPT, DV will automatically switch to OPT. Sleep timer The SEEP timer can turn the unit off after a set time. It does not control any other components. MUTI CONTO. Press []..Press [<, >] to select SEEP. è [ENTE].Press [<, >] to select the required time. The display changes as follows: OFF v 0 v 60 v 90 v 0 (minutes) è [ENTE] emote control Press [SEEP]. Press [ /] or [+/] to select the required time. To check the setting Press [SEEP] on the remote control once. The time remaining appears. To change a setting epeat the procedure from the beginning. INPUT SEECTO MUSIC AV/MOVE TUNE TUNE VIDEO IN AUDIO IN VC ecording on other equipment You can record to a tape deck connected to TAPE EC OUT (), or a DVD recorder/vc connected to DV/VC (DVD/VC) OUT..Press [INPUT SEECTO] to select the source to be recorded.. Begin recording. Follow your recording unit s operating instructions..start the source to be recorded. Note () With a tape deck, you can record any analogue source except TAPE. With a DVD recorder/vc, you can record any analogue source except DV/VC (DV/VC). When you select DVD 6CH INPUT mode, only sound from the front left and right channels is recorded. Some sources do not allow digital recording. Connect through the analog terminals and select "ANAOG" input. The ESET function MUTI CONTO PEV / ENTE ETUN Operations The operation settings for the unit will be initialized to the settings made at the time of shipment. However, any preset radio stations will not be erased. MUTI CONTO. Press []..Press [<, >] to select SETUP. è [ENTE].Press [<, >] to select ESET. è [ENTE].Press [<, >] to select YES. è [ENTE] QT780

22 emote control operation guide This remote control can operate Panasonic and Technics audiovisual equipment that have remote control sensors. Note that this remote control cannot operate some equipment and that it may not be able to perform some operations. Set your DVD player speaker output to "small" when playing in DVD-6CH mode, provided it has speaker output setting function. DVD ECEIVE DVD ECODE DVD DVD/HDD ECODE DVD ANAOG 6CH VC CD Watching DVDs Switch on Switch on the television and select input /VIDEO DIECT TUNING DISC 0 ENTE > = 0 CH VOUME u/t y/i TUNE/BAND MUTING Switch off DVD ANAOG 6CH DVD ANAOG 6CH DVD ECODE Switch on the player and start play or or DVD ECODE q g h q MENU Operating the DVD player/dvd recorder DIECT NAVIGATO PAY IST DISPAY VO /VIDEO INPUT MODE ENTE ETUN DIMME SUBWOOFE CENTE FOCUS TEST VO / / TONE/ BAANCE SEEP EVE EFFECT MENU DIECT NAVIGATO Show disc menus MENU PAY IST ENTE ENTE > = 0 Start play from a selected item STEEO/ CH MIX %P MUSIC AV/MOVIE OFF Show disc menus DISPAY Select and enter menu items u/t y/i Skip items during play VO Show player menus u/t y/i Search through the disc (Press and hold) Operations MENU MENU ETUN VO Clear menus or return to previous menus h u/t Start slow-motion play y/i DIECT TUNING DISC h Specify a disc [-disc changer] To view frame-by-frame g h DVD ECODE DVD/HDD Switch between DVD and HDD [DVD recorder with HDD] Stop play Pause play QT780 When using both a DVD player and a DVD recorder To prevent accidental operation When operating a DVD recorder, use the remote control that comes with the DVD recorder. When using a Panasonic DVD recorder, change its remote control code to a different number such as "" or "". (efer to its Operating Instructions for details.)

23 / CABE / VC ECEIVE 6 7 DIECT TUNING DISC DVD ECODE DVD DVD/HDD ECODE ENTE DVD ANAOG 6CH VC > = 0 CD CH VOUME u/t y/i TUNE/BAND MUTING Watching / cable Switch on When the code is set When the cable code is set Switch on the television and select input /VIDEO g h q MENU Switch off DIECT NAVIGATO DISPAY VO /VIDEO INPUT MODE ENTE PAY IST ETUN DIMME SUBWOOFE CENTE FOCUS TEST VO / / TONE/ BAANCE SEEP EVE EFFECT Operating the / cable box CH Change channels sequentially ENTE > = 0 Select channels directly Only when the code is set DISPAY ETUN VO VO Adjust the volume STEEO/ CH MIX %P MUSIC AV/MOVIE Watching videotapes OFF Switch on /VIDEO Switch on the television and select input Switch off VC VC Switch on the player and start play q Operations Operating the video deck CH Change channels sequentially ENTE > = 0 Select channels directly u/t y/i ewind or fast-forward g Stop play h Pause play QT780

24 emote control operation guide CD ECEIVE DVD ECODE DVD DVD/HDD ECODE DVD ANAOG 6CH VC CD istening to CDs Switch on CD Switch on the player and start play q 6 7 DIECT TUNING DISC CH VOUME u/t y/i TUNE/BAND MUTING g DIECT NAVIGATO ENTE h > = 0 q MENU PAY IST Switch off Operating the CD player Start play from a selected track CD ENTE > = 0 DIECT TUNING DISC Specify a disc [- or -disc changer] DISPAY VO /VIDEO ENTE ETUN VO DIMME SUBWOOFE CENTE FOCUS u/t y/i Skip tracks during play h Pause play DIECT TUNING DISC q INPUT MODE TEST / / 0 TONE/ BAANCE SEEP EVE EFFECT STEEO/ CH MIX %P MUSIC AV/MOVIE OFF g Stop play Start play from a specified disc [MEGA CD changer] (holds more than 0 discs) QT780 Operations

25 Using this remote control to operate equipment manufactured by Panasonic, Technics, and other companies This remote control can operate Panasonic and Technics audio-visual equipment that have remote control sensors. You may need to change the remote control code. It can also operate some other brands of televisions, cable, video cassette players, and DVD players. Check the table for the brand and enter the code as follows. (Code table è page 6.) ECEIVE DIECT TUNING DISC u/t y/i TUNE/BAND MUTING g DVD ECODE DVD DVD/HDD ECODE ENTE h DVD ANAOG 6CH VC > = 0 CD CH VOUME q Changing the codes /cable VC DVD player VC -ANAOG 6CH Press and hold the button corresponding to the equipment DVD Enter the first digit DIECT NAVIGATO MENU PAY IST 0 ENTE DISPAY ETUN VO /VIDEO VO DIMME SUBWOOFE CENTE FOCUS 6 Enter the second digit INPUT MODE TEST / / TONE/ BAANCE SEEP EVE EFFECT STEEO/ CH MIX %P MUSIC AV/MOVIE OFF 0 The remote control outputs the on/off signal. If the code is correct, the equipment turns on or off. If it doesn t, try entering another code. Note that this remote control cannot operate some equipment and that it may not be able to perform some operations. e-enter the codes after you change the batteries. Operations QT780

26 emote control operation guide Code table (You cannot control both and cable with this remote control.) QT780 Operations 6

27 Advance setup (For those with expertise) You can also change the speaker settings. MUTI CONTO. Press [<] and [>] at the same time.. Press [<, >] to select the sub menu. è [ENTE] If there is a menu in level as well, repeat step to make the settings. Press [ETUN] to return to the level above. Press [] to return to the Top menu. Pressing [ETUN] or [] while the Top menu is displayed takes you immediately to the EXIT menu. Note Change these settings only if necessary. Top menu Sub menu (evel ) Sub menu (evel ) SPEAKES Optional speakers only Set the size to suit your speakers. (arge: For speakers that can reproduce the bass range below 00 Hz) FONT CENTE SUOUND SMA, AGE NONE, SMA, AGE NONE, SMA, AGE DISTANCE Enter the distance of the front, center and surround speakers from the seating position. SUB-WF FONT CENTE NO, YES FEET 0 FEET FEET 0 FEET SUOUND FEET 0 FEET FITE Change the cut-off for bass output from the front speakers 00, 0, 00 (Hz) EXIT Exit SAVE, NO QT780 Operations 7

28 Specifications (IHF 78) eference QT780 8 n AMPIFIE SECTION MS output power of each channel driven 0 % total harmonic distortion khz front CH [] 60 W per channel (6 Ω) [SC-HT0] W per channel (6 Ω) khz surround CH [] 60 W per channel (6 Ω) [SC-HT0] W per channel (6 Ω) khz center CH [] 0 W per channel (6 Ω) [SC-HT0] 60 W per channel (6 Ω) 00 Hz subwoofer CH [] 0 W per channel ( Ω) [SC-HT0] 0 W per channel ( Ω) Total MS output power [] 700 W [SC-HT0] 600 W ated minimum sine wave MS power output % total harmonic distortion (Dolby Digital mode) 0 Hz-0kHz front CH [] W per channel (6 Ω) [SC-HT0] 0 W per channel (6 Ω) 0 Hz-0 khz surround CH [] W per channel (6 Ω) [SC-HT0] 0 W per channel (6 Ω) 0 Hz-0 khz center CH [] 0 W per channel (6 Ω) [SC-HT0] 0 W per channel (6 Ω) Hz-0 Hz subwoofer CH [] 0 W per channel ( Ω) [SC-HT0] 0 W per channel ( Ω) Total FTC output power [] 0 W [SC-HT0] 70 W ated minimum sine wave MS power output % total harmonic distortion (Stereo mode) 0 Hz-0 khz front CH [] W per channel (6 Ω) [SC-HT0] W per channel (6 Ω) -0 Hz subwoofer CH 0 W per channel ( Ω) Total FTC output power [] 0 W [SC-HT0] 90 W Total harmonic distortion Half power at khz (Front CH) 0. % (6 Ω) Input sensitivity [] DVD, DV/VC,, TAPE, CD, VC [SC-HT0] DVD, DV/VC,, GAME/AUX 0 mv, IHF 66 S/N (IHF A) [] DVD, DV/VC,, TAPE, CD, VC [SC-HT0] DVD, DV/VC,, GAME/AUX Input impedance [] DVD, DV/VC,, TAPE, CD, VC [SC-HT0] DVD, DV/VC,, GAME/AUX Tone controls BASS TEBE 7 db (8 db, IHF 66) kω 0 Hz, +0 to -0 db 0 khz, +0 to -0 db Digital input OPTICA COAXIA n FM TUNE SECTION Frequency range MHz Sensitivity. dbf ( µv, IHF '8) 0 db quieting sensitivity MONO 8. dbf (. µv, IHF '8) STEEO 8. dbf ( µv, IHF '8) Total harmonic distortion MONO 0. % STEEO 0. % S/N MONO 7 db STEEO 6 db Frequency response 0 Hz- khz, + db, - db Image rejection at 98 MHz 0 db Stereo separation khz 0 db 0 khz 0 db Antenna terminal 7 Ω (unbalanced) n AM TUNE SECTION Frequency range 0-70 khz Sensitivity 0 µv/m Selectivity db n VIDEO SECTION Output voltage at V input (unbalanced) ±0. Vp-p Maximum input voltage. Vp-p Input/output impedance 7 Ω n SPEAKE SECTION Front/Surround speaker (:SB-FS97) (SC-HT0:SB-PF7,SB-PS7) Type [] Way, Speaker, Bass-ref. [SC-HT0] Way, Speaker, Bass-ref. Speaker unit Full range [] 6. cm (-/ ) cone type x, 6 Ω [SC-HT0] 6. cm (-/ ) cone type, 6 Ω Super tweeter (SB-FS97,SB-PF7) 6 cm (-/8 ) ing Shaped Dome type, 6 Ω Tweeter (SB-PS7) 6 cm (-/8 ) cone type, 6 Ω Input power (IEC) [] 60 W (Max) [SC-HT0] W (Max) Output sound pressure level [] 8 db/w (.0 m) Crossover frequency Frequency range [SC-HT0] 80 db/w (.0 m) [] 800 Hz, 7kHz [SC-HT0] khz [] 96 Hz-0 khz (-6 db) 0 Hz- khz (-0 db) [SC-HT0] 9 Hz- khz (-6 db) 0 Hz-0 khz (-0 db) Dimensions (W x H x D) [] 0 x MAX:8 (MIN:678) x 0 mm (9-7/6'' x MAX:-/6'' (MIN:6-/6'') x 9-7/6'') [SC-HT0] 86 x 0 x mm (-7/6'' x 9-7/6'' x -7/'') Mass []. kg (9. lb.) [SC-HT0] 0.89 kg (.96 lb.) Center speaker (:SB-PC97) (SC-HT0:SB-PC7) Type Way, Speaker, Bass-ref. Speaker unit Full range 6. cm (-/ ) cone type x, 6 Ω [] Super tweeter 6 cm (-/8 ) ing Shaped Dome type, 6 Ω [SC-HT0] Tweeter 6 cm (-/8 ) cone type, 6 Ω Input power (IEC) [] 0 W (Max) [SC-HT0] 60 W (Max) Output sound pressure level [] 8 db/w (.0 m) Crossover frequency Frequency range [SC-HT0] 8 db/w (.0 m) khz [] 0 Hz-0 khz (-6 db) 0 Hz-6 khz (-0 db) [SC-HT0] 9 Hz- khz (-6 db) 0 Hz-0 khz (-0 db) Dimensions (W x H x D) [] 0 x 97 x 9 mm (-9/'' x -/6'' x -/'') [SC-HT0] 00 x 0 x 7 mm (-/6'' x '' x -/8'') Mass [].0 kg (. lb.) [SC-HT0].8 kg (. lb.) Active subwoofer (:SB-WA07) (SC-HT0:SB-WA0) Type Way Speaker, Bass-ref. Speaker unit (Woofer) 7 cm (6-/ ) cone type, Ω Input power (IEC) [] 0 W (Max) [SC-HT0] 0 W (Max) Output sound pressure level 80 db/w (.0 m) Frequency range -0 Hz (-6 db) 6-90 Hz (-0 db) Dimensions (W x H x D) 09 x 6 x 6 mm (8-7/'' x -7/'' x 8-7/'') Mass [].8 kg (6.0 lb.) [SC-HT0]. kg (. lb.) n GENEA Power supply AC 0 V, 60 Hz Power consumption (Main unit) W (Subwoofer) [] 90 W [SC-HT0] 0 W Dimensions (W x H x D) (Main unit) 0 x 68 x 87 mm (6-/6'' x -/6'' x -9/'') Mass (Main unit).0 kg (. lb.) Power consumption in standby mode: Notes:. Specifications are subject to change without notice. Mass and dimensions are approximate.. Total harmonic distortion is measured by the digital spectrum analyzer. For main unit Marking sign is located on bottom of the unit. Maintenance If the surfaces are dirty W To clean this unit, wipe with a soft, dry cloth. Never use alcohol, paint thinner or benzine to clean this unit. Before using chemically treated cloth, read the instructions that came with the cloth carefully.