Catalogue 2010/2011. Plastering machines, screed pumps and fine concrete pumps

Transcription

1 Putzmeister Mörtelmaschinen GmbH Catalogue 2010/2011 Machines Accessories Spare parts Tools Plastering machines, screed pumps and fine concrete pumps Catalogue 2010/2011 Putzmeister Mörtelmaschinen GmbH Max-Eyth-Straße 10 D Aichtal Germany P. O. Box 2152 D Aichtal Germany Telephone +49 (0 ) Telefax +49 (0 ) Internet mm@putzmeister.de

2 Our catalogue as an aid to work This year s complete catalogue of more than 140 pages will show you the complete range at Putzmeister Mörtelmaschinen GmbH. Here you will find all our products: floor screed pumps, plastering machines, small fine concrete pumps and of course all the right accessories and tools. For Dynajet high-pressure cleaners, we issued a separate catalogue (MM 3474) as well as for fine plastering machines and paint pumps (MM 3682). Please feel free to request a copy. Easy to search for, easy to find Every machine chapter starts with a practical summary table. Here we guide you from the application to the right machine. So you will know which machine/accessories is the right one for you. Each machine is described in detail, with all its important technical data. Here we ask you to note that we have to reserve the right to make technical changes, and also that the performance details are guideline figures and are therefore subject to alteration. We also show you the accessories applicable in each case, so that you always have a complete overview. Technical data may be changed without prior notice. Please note: We are grateful for ideas and suggestions on how we can improve the way we design the catalogue even better in the future. Simply write to: Putzmeister Mörtelmaschinen GmbH Subject Catalogue Max-Eyth-Straße 10 D Aichtal Germany Caveat: We reserve the right to increase the number of DIN parts and tools per order to minimize the internal costs of storage and packaging. For a safe and correct operation of the machine please refer to the appropriate operating manual. And if you want to know more about us, just get in touch: Telephone +49 (0) Or pay us a visit on the Internet: Issue: April

3 Table of Contents General overview 4-9 Overview Trans Mix Screed pump application overview Accessories for screed pumps Self levelling screed pumps SP SP Pneumatic conveyor M M M M M M Suggested accessories for pneumatic conveyors Accessories for fine concrete pumps Fine concrete pump application overview Fine concrete pumps P Suggested accessories for P P Suggested accessories for P Accessories for plastering machines Plastering machine application overview Mixer pumps MP 10 / MP MP Suggested accessories for MP MP 25 MIXIT / MP 25 FMP Suggested accessories for MP General accessories Conveying systems FA 400 / FAT 400 / FA 420 / FAT Mortar spraying systems Sprayboy P Suggested accessories for Sprayboy P SP Suggested accessories for SP S Suggested accessories for S CM SP 11 Beliso series Suggested accessories for SP 11 Beliso series P Suggested accessories for P Tools We are there for you Conditions of sale and delivery

4 Welcome to Putzmeister... Quality Made in Germany The Putzmeister Group in Aichtal, near Stuttgart. This is where our headquarters are located but our ideas for technical solutions are formulated on construction sites. That's where it's all about making work easier and more efficient. Whether you're working with mortar, screed, fine concrete, or paint, we can help with mixing, pumping, application, and spraying tasks. Practical innovations have made us great. And our machines are used throughout the world. Putzmeister Mörtelmaschinen GmbH develops, produces, and delivers one of the world's most extensive ranges of powerful, site-optimised plastering machines and screed conveyors as well as professional Dynajet high-pressure cleaners. As a wholly-owned subsidiary of the Putzmeister Group, we are able to offer you, our customers and sales partners, ideal conditions when it comes to expertise, investment security and optimum service in all sectors. Extremely modern production facilities in Aichtal The new assembly hall makes use of a line production system which is linked to numerous throughput stations. The production plant in Aichtal near Stuttgart offers 9000 m 2 of extremely modern facilities for the production of compressed air conveyors, mixing pumps, piston pumps, worm pumps, and the entire professional high-pressure cleaning range of the Dynajet brand. All work steps are standardised and guarantee consistently great quality with regard to processing and the performance of the finished products. Quality Assurance Our quality management measures start with the vitally important selection of ISO-certified suppliers and continue with the regular checking of these suppliers. A total of 9000 m 2 of space is available for the production of Putzmeister mortar machines in Aichtal. Our pressure vessels are welded at our own works using precise robotics and are then thoroughly checked using ultrasound methods. We form part of the globally active Putzmeister group. With several subsidiaries throughout the world, the Putzmeister Group is represented on all global markets and is a real international player. Our main focuses are on the manufacture of machines for the distribution of concrete, mortar, and high-density substances. In this way, companies of the Putzmeister group are active in business segments in many different areas: Concrete pumps Plant engineering Tunnelling machinery Large robot technology Mortar machines High-pressure cleaners Coating technology (fine plastering machines and paint pumps) Countless honours and awards are a testament to the pioneering role of the Putzmeister group and the vision of our company founder Karl Schlecht. Each machine is started up and tested immediately after assembly. If the test is successful, it is sent on for a final inspection. During the final production inspection, each machine is optimally adjusted one last time. We test our machines in continuous operation, checking all functions such as safety devices. In this way, we ensure that you receive a reliable Putzmeister product in perfect condition. Technology with more value However, sophisticated technology isn't everything: In addition, we try to make sure that our contact with customers, sales partners, and suppliers is pleasant and beneficial for both sides. Area-wide network of competent and helpful sales partners Good quality, comprehensible technical documents A willingness to listen to questions or problems Fast, uncomplicated order processing Quick delivery times for machines and replacements/wearing parts Friendly and competent employees Fair pricing Quality guarantee: Our machines only use parts which have passed the most stringent quality controls and in-depth testing. Finishing: Not one single machine leaves our production hall without being subjected to a thorough final inspection and careful cleaning. Investing for the future We also want to meet both our and your expectations in the future. This is why we continuously invest in qualified and committed employees. Excellent quality is simply not possible without them. We consistently continue to back the latest computerised plants and technology. Without them, it simply would not be possible to develop and manufacture top-quality products and to deliver them without faults. We also intensively cultivate contacts with our customers, suppliers and sales partners throughout the world. Aichtal: 21,500 m² of space for producing excellent Putzmeister quality The Putzmeister group: at home all over the world 4 5

5 In operation anywhere and at any time worldwide Putzmeister Mörtelmaschinen GmbH is pleased to present one of its most extensive ranges of machines: from the versatile plastering machines, such as our mixer and worm pumps, to state-of-the-art floor screed conveyors and our small fine plaster spraying and paint pumps, and beyond to our sturdy fine concrete piston pump. Fine concrete pumps for pumping anhydrite, cement and cementite self levelling floor screed, shotcrete, as well as fine concrete with up to 32 mm granulation We can provide you with the right machine and suitable accessories for virtually all applications. Floor screed pumps for self levelling floor screed and traditional cement screed, for mixing and conveying materials like sand and gravel to pourable and fine concrete Some of the illustrations show snapshots which do not always comply with the regulations of the Industrial Employers' Liability Insurance Association. 6 7

6 In operation anywhere and at any time worldwide Plastering machines for plaster made from sand, lime and cement, as well as mortar, available in different versions and performance levels for various applications within the civil engineering and construction industries Some of the illustrations show snapshots which do not always comply with the regulations of the Industrial Employers' Liability Insurance Association. 8 9

7 Trans Mix the screed factory on wheels The right Trans Mix system for every application Whatever you need, you will find the right conveying factory for your needs from amongst our numerous Trans Mix models. Here are some of the possible configurations: For detailed information on all Trans Mix models, see Fully automatic mixing and conveying - easy and universal Trans Mix systems are mobile mixing and delivery systems for making and conveying liquid screed, traditional cement screed, anhydride screed, and lightweight concrete. All necessary materials such as water, sand, binder, polystyrene insulation, fibres, and liquid concrete additives are stored on board in special repositories. They are automatically metered, mixed, and conveyed in the Trans Mix as required at the construction site. The Trans Mix 8x4 versions are especially suited for urban work due to their smaller wheelbase. A liquid screed specialist thanks to a powerful worm pump: The Trans Mix 3200 FE. The semi-trailer versions are completely functional without a tractor unit. Optimum convenience and versatility Mobile Trans Mix systems have numerous advantages which are not easy to find in other systems: 12 variants for the highest possible degree of flexibility All materials can be carried on board Very short setup times at the construction site Completely automatic metering and mixing of material to be conveyed Low processing time for material of higher quality Recipes for automatic mixes can be stored in the system Consistent mixes Significantly higher output than with a conventional machine No residue; the Trans Mix simply carries it off again Reduced costs thanks to cost-effective purchase of raw materials Lower personnel requirements: Can be operated by a single person Tailored, easy billing using machine software A tilt system is used for the Trans Mix 3200 and The multiple chamber silo facility is hydraulically propped and moved into the mixing chamber using a screw conveyor. The material then falls down to the pump in the conveying container. Alternatively, the Trans Mix 400 and 500 models works with integrated delivery units which transport the material within the plant without tilting. The Trans Mix 3200 and 5500 systems are tilting systems. They differ in the pump system used and are each available in 2 variants: The 3200 FE uses a worm pump to convey liquid screed. The 5500 ZE uses a compressed air conveyor to convey cement screed. A fully automatic mixing process guarantees consistent quality with exact metering and weighing. No shortages, no residue the Trans Mix 5500 carries everything you need for on-site work along with it and takes away anything that's left over. In addition, the semi-trailer versions of the 3200 and 5500 are each available as an ST variant for polystyrene insulation. Semi-trailer or 8x4 truck system Nearly all Trans Mix systems are available either as a semi-trailer for your own tractor unit or as an 8x4 truck system with 4 driven wheels. The latter variant is particularly suitable for cramped construction sites. The Trans Mix semi-trailers do not require a tractor unit, but can be operated on their own. The Trans Mix 400 and 500 models do not tilt. Instead, they have integrated delivery units. They can be fitted with three different pump systems: An FE version, with a worm pump for conveying liquid screed A ZE version, with a compressed air conveyor for processing cement screed An LB version, with a piston and worm pump for conveying lightweight concrete Thanks to the large loading capacities, the semi-trailer version Trans Mix 500 and the 8x4 version Trans Mix 400 are particularly versatile. And, because they have an integrated delivery system, they can be used in places where tipping is not possible. One person can load the Trans Mix system

8 Machines for floor screed, gravel, sand or concrete conveying Application overview floor screed pumps For small or large construction sites, for fine or coarse materials, for short or long delivery distances: Putzmeister machines achieve performance and alleviate the work. Note: Always use a machine-compatible mortar in combination with machine technology. If you have any questions, please contact the material manufacturer or contact us directly. Conventional floor screed Self levelling floor screed Ideal Conditional Not suitable Dry mixed mortar Construction site mix Dry mixed mortar Ready mixed mortar Construction site mix grain up to 8 mm grain up to 16 mm grain up to 4 mm grain up to 8 mm grain up to 8 mm Pneumatic conveyors M 760/ M 740/ M 730/ M 710/ M 700/ M 500 Pages Mixer pumps MP 22 Pages MP 25 Pages Conveying units FA 400 / FA 420 Pages Worm pumps S 5 Pages SP 11 BHF / SP 20 DHF Pages BMR / BMB / BMT SP 11 SP 11 BUR / BBR Pages Piston pumps P 715 P 718 Pages P 13 Pages

9 Worm pumps Self levelling floor screed pumps Worm Pump SP 11 BHF The machine for self levelling floor screed from truck-mixer and continuous mixer You can control all machine functions conveniently from the central control panel. A modern diesel engine with integrated hydraulic system supplies the SP 11 with sufficient power at all speeds. The powerful, low-wearing worm pump 2L75. The lightweight SP 11 BHF is compact, manoeuvrable and powerful yet quiet during operation. It is the worm pump for floor screed professionals. Suitable for pumping material with 0-8 mm grain size, e.g. self leveling anhydrite floor screed and cement floor screed, etc. A truck mixer or other external mixers supply the machine with wet mixes. SP 11 BHF Large hopper Powerful diesel engine Hydraulically driven reversible worm pump Infinitely variable delivery rate Modern, hard-wearing plastic hood Simple operation via cable remote control or directly at the control console PLC control high pressure water cleaner safety grid screen with 15 mm opening and 12 volt vibrator Standard equipment: pressure gauge in pressure connection, operating instructions, spare parts list, standard tools, 60 m remote control cable on cable drum, ball hitch SP 11 BHF with hose drum The equipment is identical to that of the SP 11 BHF. However, this model also has a hydraulic hose drum to enable the easy transportation of DN 50 hoses of up to 30 m in length. On request Please ask if you require electrical versions of the SP 11 or additional information. Supplementary equipment SP 11 BHF Part Radio remote control on / off Radio remote control with output regulation Grid screen MW Torque arm for stator DIN trailer coupling ring (truck) brakeless Vibrator 12 V DC Working light Suggested accessories for self levelling floor screed: Part Fig. 2x Delivery hose ID 50mm, V50, M50 20m x Sponge rupper ball ID x Sealing ring ID x Hose holder made of leather Technical data SP 11 BHF SP 11 BHF SP 11 BHF Special feature Basic version Comfort With hydraulic hose drum Machine model hydraulic worm pump Pumpe worm pump 2L75 Theor. delivery rate* 0-15 m 3 /h 0-15 m 3 /h 0-15 m 3 /h Delivery pressure 20 bar 20 bar 20 bar Drive motor 4-cylinder-Kubota diesel engine, 22.7 kw at 2,600 rpm Chassis without brakes with brakes, roadworthy Hopper volume 220 l 220 l 220 l Support load 30 kg 30 kg 70 kg Weight 740 kg 740 kg > 750 kg Length 3,210 mm without tow-bar 3,210 mm without tow-bar - 3,519 mm with tow-bar 3,519 mm with tow-bar 3,930 mm with tow-bar Width 1,420 mm 1,420 mm 1,420 mm Height 1,150 mm 1,150 mm 1,160 mm Filling height 600 mm 600 mm 880 mm Maximum grain size 8 mm 8 mm 8 mm Discharge connection M 50 M 50 M on request * The delivery rate depends on the rotor / stator, pump speed (rpm) and pumping media. The delivery rate may be higher or lower. SP 11 BHF Comfort The SP 11 BHF Comfort is the same as the SP 11 BHF, but with remote control for convenient delivery rate regulation and switching the machine on and off Further information is available in brochure MM For additional accessories see page 102 ff

10 Worm pumps Self levelling floor screed pumps Worm Pump SP 20 DHF Unbeatable in pump performance and low in wear You can operate the SP 20 cpl. from one side, or using the convenient radio remote control. The diesel engine with an impressive output of 32.8 kw. The new wear-resistant worm pumps, type 2L8. A professional self levelling floor screed worm pump. Hydraulically driven with an infinitely adjustable pumping rate up to 18 m 3 /h, it is the worm pump for the self levelling floor screed professional compact, powerful and soundproofed. Grains up to 8 mm, even over-size up to 12 mm are no problem for this pump, e.g. anhydrite, cementrite, cement self levelling floor screed etc. The SP 20 should only be fed by truck-mixers. Supplementary equipment Part Electric vibrator placed outside the material hopper H Signalling device on the machine, horn H (only with radio remote control) Signalling device on the machine, indicator lamp H Radio remote control H Cable drum with remote control H Diesel particle filter H Battery for radio transmitter H Connecting adapter with pressure gauge H Technical data SP 20 DHF SP 20 DHF Machine model hydraulic worm pump Pump worm pump 7515 worm pump 2L8 Theor. delivery rate* 15 m 3 /h 18 m 3 /h Delivery pressure 35 bar 25 bar Drive motor 3-cylinder diesel engine, Deutz, 32.8 kw at 2,600 rpm Chassis robust T-chassis, with brakes Hopper volume 250 l 250 l Support load 45 kg 45 kg Weight 960 kg 960 kg Length 4,200 mm with tow-bar 4,200 mm with tow-bar Width 1,300 mm 1,300 mm Height 1,280 mm 1,280 mm Filling height 1,000 mm 1,000 mm Maximum grain size 8 mm 12 mm Discharge connection V 50 V 50 H H SP 20 DHF Powerful engine Worm pump with hydraulic pump drive Reversible worm pump 7515 or 2L8 Infinitely variable delivery rate, even from the hose end Infinitely variable mixer speed Storage space for spare worm pump Storage space for tools Large hopper Tilting sieve insert with 15 mm opening Suggested accessories for self levelling floor screed: Part Fig. 2x Delivery hose ID 50mm, V50, M50 20m x Sponge rupper ball ID x Sealing ID x Hose holder made of leather * The delivery rate depends on the rotor / stator, pump speed (rpm) and pumping media. The delivery rate may be higher or lower. Standard equipment: pressure-gauge in pressure connection, operating instructions, spare parts list, standard tools, overrun braking device with ball hitch. H H Further information is available in brochure MM For additional accessories see page 102 ff

11 Pneumatic conveyors Floor screed conveyors Mixokret M 760 DH, M 760 DHB, M 760 DHBS The most powerful Mixokret ever with 46 kw powerful diesel engine and hydraulic drive Mixokret M 760 DH The control panel is well laid out and protected by a robust flap. You can select the position of the lid on the mixing vessel as required. The diesel engine has an inline design for a tidier appearance and improved layout. The M 760 is our most powerful Mixokret. It is practical, easy to use, and easy to service. Like every Mixokret, this model is suitable for mixing and conveying floor screed, sand, gravel and fine grained concrete with a grain size of up to 16 mm. M 760 DH Wear resistant mixing blades Hydraulically driven mixer unit with forward / reverse and overload protection Extremely lightweight, hard-wearing plastic hood Intelligent air control 4-cylinder diesel engine with inline design, fulfils emission standard COM III Solid, reliable chassis Tow bar can be lowered to 20 cm Analogue controls easy to read, protected by a robust flap Mixer drum with variable lid position Efficient vessel venting system Multi-stage low-wearing mixer shaft seal Exchangeable discharge connection for ID 50, 65, 90 Delivery air cut-out autom. central lubrication system working light Lifting ring Integrated 40 l tool box Standard equipment: ball and ring hitch, operating instructions, standard tools, one discharge stand included. Please specify the required discharge stand when placing your order (see page 30) Mixokret M 760 DHBS M 760 DHB Same as M 760 DH, but with skip for faster, power saving filling of the mixing vessel M 760 DHBS Same as the M 760 DHB, but with hydraulically driven and radio remote controlled scraper winch with 11 m hauling rope and practical rope guide mounted on the skip Supplementary equipment Part Hydraulically driven high-pressure cleaner installation kit, up to 140 bar operating pressure, with spray gun and 8 m high-pressure hose Mixing time adjustment 5-30 sec protection vessel including all WPs Trailer lighting 24 V Mix counter Individual painting (hood paint, no metallic-paint) on request Special labelling, with logo and 1-colour text on request Other labelling on request Service package 500 h Service package 1,000 h Navigation and fleet management system Vehicle cable adapter 7-13 pin, 12 V Vehicle cable adapter 13-7 pin, 12 V Mechanical water metering Exhaust system with particle filter on request For accessories and hose packages, see page 30. Technical data M 760 DH M 760 DHB M 760 DHBS 260 l mixing vessel; 200 l volume; max. perm. 8 bar vessel pressure Special feature basic version with skip with skip and scraper Theor. delivery rate* 4 m 3 / h 4.8 m 3 / h 5 m 3 / h Delivery pressure 7 bar 7 bar 7 bar Delivery distance* 200 m horizontally, 50 storeys high Compressor 5.0 m 3 / min, switch-off pressure 7 bar Drive motor D 2011 L04 4-cylinder Deutz diesel-engine, 46.5 kw at rpm (Emission category III A) Chassis fully galvanised chassis with adjustable coupling height (20-80 cm), robust T-chassis Weight (tank full) 1,600 kg 1,820 kg 1,900 kg Length 4,820 mm 4,820 mm 4,820 mm Width 1,500 mm 1,500 mm 1,500 mm Height 1,600 mm 1,600 mm 1,600 mm Loader height (vertical) 2,480 mm 2,830 mm with scraper Filling height 820 mm 600 mm 600 mm Maximum grain size 16 mm 16 mm 16 mm Discharge connection KKV 70 KKV 70 KKV 70 Skip volume 260 l 260 l 260 l * The data is based on experience and is dependent on the materials used. Further information is available in brochure MM For suggested accessories for various applications see pages For additional accessories see page 87 ff

12 Pneumatic conveyors Floor screed conveyors Mixokret M 740 D, M 740 DB, M 740 DBS The easy-to-use Mixokret with modern plastic hood Mixokret M 740 D The control panel is well laid out and protected by a robust flap. You can select the position of the lid on the mixing vessel as required. The M 740 has a powerful 3-cylinder diesel engine. The M 740 is the most successful screed conveyor in Europe. It is easy to use, easy to service, and stylish. This real allrounder is suitable for mixing and conveying floor screed, sand, gravel and fine grained concrete with a grain size of up to 16 mm. M 740 D Wear resistant mixing blades Extremely lightweight, hard-wearing plastic hood Intelligent air control 3-cylinder diesel engine with inline design, fulfils emission standard COM III Solid, reliable chassis Tow bar can be lowered to 20 cm Analogue controls easy to read, protected by a robust flap Mixer drum with variable lid position Efficient vessel venting system Electro-pneumatic engagement and disengagement of the V-belt on the mixer drive Multi-stage low-wearing mixer shaft seal Exchangeable discharge connection with ID 50, 65, 90 Delivery air cut-out Autom. central lubrication system working light Lifting ring Integrated 40 l tool box Standard equipment: ball and ring hitch, operating instructions, standard tools, one discharge stand included.please specify the required discharge stand when placing your order (see page 30) Mixokret M 740 DBS M 740 DB Same as M 740 D, but with loader for faster, power sparing filling of the mixing vessel M 740 DBS Same as M 740 DB, but with hydraulically driven and radio or cable remote controlled scraper winch with 11 m hauling rope and practical cable guide mounted on the loader. Cable remote control available as alternative to radio remote control Supplementary equipment Part Hydraulically driven high-pressure cleaner installation kit, up to 140 bar operating pressure, 600 l/ h, spray gun, 8 m high-pressure hose (only for M 740 DB + M 740 DBS ) protection vessel including all WPs on request Mixing time adjustment 5-30 sec Trailer lighting 24 V Mix counter Individual painting hood (RAL paint, no metallic-paint) Special labelling, with logo and 1-colour text Other labelling on request Service package 500 h Service package 1,000 h Navigation and fleet management system Vehicle cable adapter 7-13 pin, 12 V Vehicle cable adapter 13-7 pin, 12 V Mechanical water metering Exhaust system with particle filter For accessories and hose packages, see page 30. Technical data M 740 D M 740 DB M 740 DBS 260 l mixing vessel; 200 l volume; max. perm. 8 bar vessel pressure Special feature basic version with skip with skip and scraper Theor. delivery rate* 3.8 m 3 /h 4.6 m 3 /h 5 m 3 /h Delivery pressure 7 bar 7 bar 7 bar Delivery distance* 180 m horizontally, 30 m high Compressor 4.3 m 3 / min; switch-off pressure 7 bar Drive motor D 2011 L03 3-cylinder Deutz diesel-engine, 31.5 kw at 2,300 rpm (emission category III A) Chassis fully galvanised chassis with adjustable coupling height (20-80 cm), robust T-chassis Weight (tank full) 1,564 kg 1,786 kg 1,872 kg Length 4,605 mm 4,800 mm 4,800 mm Width 1,500 mm 1,500 mm 1,500 mm Height 1,585 mm 1,585 mm 1,585 mm Loader height (vertical) 2,483 mm 2,820 mm with scraper Filling height 820 mm 600 mm 600 mm Maximum grain size 16 mm 16 mm 16 mm Discharge connection KKV 70 KKV 70 KKV 70 Skip volume 260 l 260 l 260 l * The data is based on experience and is dependent on the materials used. Further information is available in brochure MM For suggested accessories for various applications see pages For additional accessories see page 87 ff

13 Pneumatic conveyors Floor screed conveyors Mixokret M 730 DH, M 730 DHB The lightweight version of our pneumatic conveyors The LED working light is a standard series accessory fitted to the rear of the Mixokret. The discharge connection can be exchanged to match the diameter of the delivery hose. The M 730 has a powerful 3-cylinder diesel engine. The hydraulically driven M 730 combines all benefits of the Mixokret in the smallest of spaces. The small Mixokret is the ideal machine for small crews and lightweight tractor units and is perfect for mixing and conveying floor screed, sand, gravel and fine grained concrete with a grain size of up to 16 mm. M 730 DH Wear resistant mixing blades Hydraulically driven mixer unit with forward/backward run and overload protection Extremely lightweight, hard-wearing plastic hood Intelligent air ducts 3-cylinder diesel engine Solid, more reliable chassis Tow bar can be lowered to 20 cm Analogue controls easy to read, protected by a robust flap Mixer drum with variable lid position Efficient vessel venting system Multi-stage low-wearing mixer shaft seal Exchangeable discharge connection with ID 50, 65 Delivery air cut-out Autom. central lubrication system working light Lifting ring Integrated 40 l tool box Standard equipment: ball and ring hitch, operating instructions, standard tools, one discharge stand included. Please specify the required discharge stand when placing your order (see page 30) Mixokret M 730 DHB M 730 DHB Same as M 730 DH, but with hydraulically-operated skip with 150 l volume Supplementary equipment Part Mixing time adjustment 5-30 sec protection vessel including all WPs on request Trailer lighting 24 V Individual painting hood (RAL paint, no metallic paint) on request Special labelling, with logo and 1-colour text on request Mix counter Other labelling on request Navigation and fleet management system Vehicle cable adapter 7-13 pin, 12 V Vehicle cable adapter 13-7 pin, 12 V Mechanical water metering For accessories and hose packages, see page 30. Technical data M 730 DH M 730 DHB 200 l mixing vessel, 150 l volume; max. perm. 6 bar vessel pressure Special feature basic version with skip Theor. delivery rate* 2.5 m 3 /h 3.0 m 3 /h Delivery pressure 6 bar 6 bar Delivery distance* 80 m wide, 45 m high Compressor 2.7 m 3 /min; switch-off pressure 7 bar Drive motor 3-cylinder Kubota-diesel engine, 24 kw at 2,400 rpm Chassis fully galvanised chassis with adjustable coupling height (20-80 cm), robust T-chassis Weight (tank full) 1,200 kg 1,300 kg Length 4,500 mm 4,610 mm Width 1,500 mm 1,500 mm Hight 1,880 mm 1,580 mm Loader height (vertical) 2,450 mm Filling height 820 mm 600 mm Maximum grain size 16 mm 16 mm Discharge connection KKV 89 KKV 89 Skip volume 150 l 150 l M 730 DHB with HPC**: * The data is based on experience and is dependent on the materials used. ** HPC = High pressure cleaner Further information is available in brochure MM For suggested accessories for various applications see pages For additional accessories see page 87 ff

14 Pneumatic conveyors Floor screed conveyors Mixokret M 710 EB, M 710 EBS The convenient model without a compressor The M 710 has a powerful 7.5 kw electro-drive. The operating panel has a simple and clear design. It is easily accessible and located outside the working zone which is prone to dirt. Depending on the connection of the required hose (ID 50, 65 or 90), it is easy to replace the discharge connection. The M 710 EBS is the convenient, electrically powered alternative to the M 700 E. This product range is fitted with a hydraulic skip and a hydraulically driven scraper with cable remote control. The machine is suitable for conveying floor screed, sand, gravel and fine grained concrete with up to 16 mm grain size. Mixokret M 710 EBS M 710 EBS Identical to the M 710 EB but with a hydraulically driven, cable-controlled scraper winch with an 11 m pull cable and cable guide. The cable guide is fitted on the loader Special voltage configurations are available on request. Technical data M 710 EB M 710 EBS 260 l mixing vessel, 200 l volume, max. perm. 8 bar vessel pressure Special feature with skip with skip and scraper Theor. delivery rate* 4 m 3 /h 4 m 3 /h Delivery pressure 7 bar 7 bar Delivery distance* 120 m horizontally, 60 m high 120 m horizontally, 60 m high Compressor additional compressor for construction sites minimum, 4 m 3 / min; 7 bar operating pressure** Drive motor electric motor 7.5 kw, 400 V 3-phase current, 50 Hz., star-delta automatic start, socket CEE 32 Chassis not approved for road use not approved for road use Skip volume 260 l 260 l Weight 1,150 kg 1,200 kg Length 2,600 mm 2,600 mm Width 1,320 mm 1,320 mm Height 1,300 mm 1,300 mm Loader height (vertical) 2,370 mm 2,370 mm Filling height 600 mm 600 mm Maximum grain size 16 mm 16 mm Discharge connection KKV 70 KKV * The data is based on experience and is dependent on the materials used as well as on the air volume and the compressor. ** Recommended air volume 4 m 3 / min. If you use higher air volume you can increase the delivery distance. M 710 EB Electric mixer drive with geared motor Multi-stage, low-wearing PM mixer shaft seal Low-wearing mixing blades made from special chromium cast Vessel lid with safety lock mechanism and safety grid Large vessel venting system Lifting ring Replaceable discharge connections for hoses with ID 50, 65 or 90 detachable ring hitch Hydraulically driven skip Standard equipment: operating manual, standard tools, one discharge stand included. Please specify the required discharge stand when placing your order (see page 30) Supplementary equipment Part protection vessel including all WPs High-pressure cleaner installation kit, bar with spray gun and 8 m high-pressure hose central lubrication system on request For accessories and hose packages, see page 30. Further information is available in brochure MM For suggested accessories for various applications see pages For additional accessories see page 87 ff

15 Pneumatic conveyors Floor screed conveyors Mixokret M 700 E The M 700 E is especially ideal for building contractors using their own compressors The discharge connection can be easily replaced for the connection of ID 50, 65 or 90 hoses. The mixing vessel vent is large, easy to operate and works reliably. The powerful 400 V electric motor has a power of 7.5 kw. It is robust, quiet and nearly wearfree. Technical data M 700 E Mixokret M 700 E The Mixokret M 700 E is the basic model of the Mixokret floor screed conveyor range. It is by far the smallest and lightest Mixokret by Putzmeister. In the M 700 E, our engineers consistently paid attention to obtaining a simple and robust design, that is suitable for tough everyday conditions. The result is the cost-effective Mixokret by Putzmeister, which offers everything that is required on a modern construction site. The machine is suitable for conveying floor screed, sand, gravel and fine grained concrete with up to 16 mm grain size. Standard equipment: operating manual, standard tools, one discharge stand included. Please specify the required discharge stand when placing your order (see page 30) Special voltage configurations are available on request. 260 l mixing vessel, 200 l volume; max. perm. 7 bar vessel pressure Special feature basic version Theor. delivery rate* 4 m 3 /h Delivery pressure 7 bar Delivery distance* 120 m horizontally, 60 m high Compressor extra site compressor with 4 m 3 /min (minimum 2.5 m 3 /min) and 7 bar operating pressure** Drive motor electric motor 7.5 kw, 400 V 3-phase 50 Hz, 16 A fuse, socket CEE 32 Chassis not approved for road use Weight 700 kg Length 2,670 mm Width 1,280 mm Height 1,190 mm Filling height 860 mm Maximum grain size 16 mm Discharge connection KKV * The data is based on experience and is dependent on the materials used as well as on the air volume and the compressor. ** Recommended air volume 4 m 3 /min. If you use higher air volume you can increase the delivery distance. M 700 E powerful electric motor Low-wearing mixing blades Low-wearing PM mixer shaft seal Replaceable discharge connections for hoses with ID 50, 65 or 90 Vessel lid with safety lock mechanism and safety grid Large vessel venting system Mixer drum with variable lid position EWO coupling to connect additional air-operated devices master air valve to start or stop delivery Grid safety switch Lifting ring Ring hitch Supplementary equipment Part Power cable 4 x 6 mm 2, m long, coupling 32/32 Central lubrication system for the on request bearing of the mixer shaft on request protection vessel including all WPs on request For accessories and hose packages, see page 30. Further information is available in brochure MM For suggested accessories for various applications see pages For additional accessories see page 87 ff. MM 2599/10-GB MM 2599/10-GB

16 Pneumatic conveyors Floor screed conveyors Mixokret M 500 E The powerful screed conveyor with electric drive The assembly hand hole in the drum makes it easy to reach all areas for maintenance and servicing. On the M 500 too, all operating elements are arranged on one side. The operator uses the robust air cock to adjust the Mixokret s upper and lower air flow for pumping. The mixing vessel vent is large, easy to operate and works reliably. The Mixokret M 500 E offers top performance in all areas. With a capacity of 640 l, it has the biggest mixing vessel in the entire Mixokret range, which allows for longer delivery intervals. In addition, it is the only Mixokret that can convey screed, sand, fine conrete, styrofoam underlayment, leightweight concrete with expanded aggregates or pumice concrete up to a grain size of 32 mm. Mixokret M 500 E Standard equipment: operating manual, standard tools, one discharge stand included. Please specify the required discharge stand when placing your order (see page 30) Special voltage configurations are available on request. Technical data M 500 E 640 l mixing vessel, EU-tested, 400 l volume, max. perm. 7 bar vessel pressure Special feature basic version Theor. delivery rate* 4 m 3 /h Delivery pressure 7 bar Delivery distance* 120 m horizontally and 60 m high Compressor extra site compressor with minimum 4 m 3 /min air volume and 7 bar operating pressure** Drive motor electric motor 18,5 kw, 400 V 3-phase 50 Hz, 35 A fuse, CEE 63 socket Chassis not approved for road use Weight 1,200 kg Length 3,730 mm Width 1,400 mm Height 1,410 mm Filling height 1,140 mm Maximum grain size 32 mm Discharge connection KKV * The data is based on experience and is dependent on the materials used as well as on the air volume and the compressor. ** Recommended air volume 4 m 3 /min. If you use higher air volume you can increase the delivery distance. M 500 E powerful electric motor, star-delta automatic start Low-wearing mixing blades Low-wearing mixer shaft seal Hand hole in vessel Vessel lid with safety lock mechanism and safety grid Mixer drum with variable lid position Large vessel venting system Replaceable discharge connections for hoses with ID 50, 65 or 90 central air lock to start or stop delivery Geka coupling to connect additional air-operated devices Ring hitch Lifting ring Supplementary equipment Part Power cable 4 x 6 mm 2, m long, coupling 63 / 63 Central lubrication system for the bearing of the mixer shaft on request Discharge connection ID 90, KKV For accessories and hose packages, see page 30. Further information is available in brochure MM For suggested accessories for various applications see pages For additional accessories see page 87 ff

17 Accessories for Floor screed conveyors Suggested Accessories for floor screed conveyors Standard delivery line with couplings for Mixokret PM 50 ID 50 mm (up to 8 mm grain size*) Complete Set, : Standard delivery line 40 m long, consisting of: Part Fig. 2x ID 50 mm hose, 10 bar, length 20 m x Discharge stand, tripod, aluminium ID x O-ring x Sponge rubber ball, ø 60 mm for delivery hose ID 50 1x Reducer piece ID 65, KKV 70/ ID x Rectangular gasket optional: 1x ID 50 mm hose, 10 bar, length 10 m x ID 50 mm hose, 40 bar, length 20 m x Discharge stand, tripod, steel ID x Discharge stand, w. skid, steel ID x Discharge stand, w. skid, aluminium ID Delivery line KK 89 for Mixokret ID 90 mm (up to 16 mm grain size*) Complete Set, : Standard delivery line 80 m long, consisting of: Part Fig. 8x ID 90 mm hose KK 89, 10 bar, 10 m x Discharge stand, w. skid, steel KK x O-ring x Sponge rubber ball, ø 120 mm for delivery hose ID 90 1x spezieller Abgang kpl. NW 90, KKV optional: 1x Discharge stand, tripod, steel KK x Discharge stand, w. skid, steel KK x Discharge stand, w. skid, aluminium KK Delivery line KK 70 for Mixokret ID 65 mm (up to 12 mm grain size*) Complete Set, : Standard delivery line 80 m long, consisting of: Part Fig. 8x ID 65 mm hose KK 70, 10 bar, 10 m x Discharge stand, tripod, aluminum KKV x O-ring x Sponge rubber ball, ø 80 mm for delivery hose ID 65 optional: 1x NW 65 mm hose KK 70, 10 bar, 20 m x Discharge stand, tripod, steel KK x Discharge stand, w. skid, steel KK x Discharge stand, w. skid, aluminium KK Delivery line KK 108 for Mixokret ID 90 mm (< 32 mm grain size*) Complete Set, : Standard delivery line 80 m long, consisting of: Part Fig. 8x ID 90 hose KK108, 10 bar, 10 m x Discharge stand KKM x Special outlet kpl. ID 90, KKV x Sponge rubber ball, ø 120 mm for delivery hose ID 90 8x O-ring Delivery line KK 89 for Mixokret ID 65 mm (up to 12 mm grain size*) Complete Set, : Standard delivery line 80 m long, consisting of: Part Fig. 8x NW 65 mm hose KK 89 / HR, 10 bar, 10 m x KKV 89 coupling x Discharge stand, tripod, aluminium KK x O-ring x Sponge rubber ball, ø 80 mm for delivery hose ID 65 optional: 1x NW 65 mm hose KK 89 / HR, 10 bar, 20 m x Discharge stand, tripod, steel KK x Discharge stand, w. skid, steel KK x Discharge stand, w. skid, aluminium KK Accessory equipment for hose sets Part Accessories for using hoses ID 50, PM50 (including reduction KKM 70, V 50 2x sponge rubber balls, O-rings) Accessories for using hoses ID 65 / KK70 (including sponge rubber balls, O-rings) Accessories for using hoses ID 65 / KK89 (including coupling KKV 89, sponge rubber balls, O-rings) Accessories for using hoses ID 90 / KK89 (including coupling KKV 89, sponge rubber balls, O-rings) Accessories for using hoses ID 90 / KK108 (including coupling KKV 108, sponge rubber balls, O-rings) * dependent on the materials used * dependent on the materials used 30 31

18 Machine for pumping fine concrete and self levelling floor screed Application overview Fine concrete pumps For small or large construction sites, for fine or coarse materials, for short or long delivery distances: Putzmeister machines achieve a high performance and alleviate your workload. Note: Always use a machine-compatible mortar in combination with machine technology. If you have any questions, please contact the material manufacturer or contact us directly. Fine concrete Self levelling floor screed Ideal Conditional Not suitable Fine concrete Fine concrete Fine concrete Shotcrete Ready mixed mortar Construction site mix grain up to ~ 8 mm grain up to ~ 16 mm grain up to ~ 32 mm grain up to ~ 8 mm grain up to ~ 8 mm grain up to ~ 8 mm Worm pumps SP 11 BHF / SP 20 DHF Pages Piston pumps P 13 Pages P 715 Pages P 718 Pages

19 Piston pumps Fine concrete pumps P 715 Compact trailer fine concrete pump for up to 16 mm grain Operation is easy. Everything is well laid out and easy to reach. Simply fold the hopper away to the side. The agitator and S-valve are already easily accessible in front. You can reach all areas for maintenance and servicing conveniently, for checking the oil level, for example. The small, light and efficient fine concrete pump trailer for pumping anhydrite, cement and cementrite self levelling floor screed and fine concrete up to 16 mm. Ideal for shotcreting, pressure pointing mortar and for concreting work for up to 16 mm grain. The S-valve allows pump pressures up to 68 bar, and is even seal-proof for slurries and water. Wear that occurs is compensated automatically wtih the automatic ring of the S-valve. P 715 P 715 TD Diesel or electro-hydraulic drive in steel frame Trailer with DIN hitch (truck) with overrunning brake permitted up to 80 km/ h or as a stationary skid version Plastic engine hood and TARGA hoop Hopper with agitator and rubber collar Folding 30 mm safety grid screen with 12 volt vibrator Safety shutoff for agitator hopper with flap for emptying and cleaning Folding hopper attachment 2-cylinder piston pump with hard-chrome-plated delivery cylinders and a water box between the drive and delivery cylinders to flush the pistons and cool the piston rods It is possible to replace the pistons through the water box Hydraulic control of pump and S-valve. Infinitely variable pumping rate, manually adjustable The maximum pumping pressure can be set to 40 or 68 bar Central lubrication manifold Standard equipment: cleaning pipe 4.5 SK, clamp coupling with seal, cleaning accessories and tools, protective helmet (yellow), operating manual and spare parts list Special voltage configurations are available on request. Supplementary equipment Part Central lubrication system Exhaust system particle filter Grid screen MW 10 for shotcrete Grid screen MW 20, detachable Cable remote control, electric, 5 m (pump on / off, reverse pumping, emergency off) Radio remote control with transmitter and receiver (pump on/ off, reverse pumping, emergency off) Interface cable, 16 pin, 1 m long (only for retrofitting) Top for hopper High-pressure cleaner, up to 140 bar installation kit l/ h with spray gun and 8 m high-pressure hose Flushing water pump, 20 bar, 50 l/min installation kit Working light, 12 V, 50 Watt Halogen Fuses, spare part package Ball hitch Special paint for hood (RAL colour) Additional equipment for pumping self-levelling floor screed, side air chamber Remote control cable, 10 m Remote control cable, 20 m Remote control cable, 50 m End pipe with shutter Central lifting eye pin to 7-pin adapter socket pin to 13-pin adapter socket Technical data P 715 TD P 715 SD P 715 TE P 715 SE Machine type trailer pump stationary pump trailer pump stationary pump Pump 2-cyl. piston pump, hydraulically driven Theor. delivery rate (piston side) m 3 / h m 3 / h m 3 / h m 3 / h Delivery pressure (piston side) 68 bar 68 bar 68 bar 68 bar Cylinder diameter 150 mm 150 mm 150 mm 150 mm Diameter piston stroke 700 mm 700 mm 700 mm 700 mm Strokes per minute (minimum) Drive cylinder diameter 80 / 45 mm 80 / 45 mm 80 / 45 mm 80 / 45 mm Drive motor 3-cyl. diesel engine Deutz F3M 2011, 34.5 kw 30 kw electric motor, 400 V, 50 Hz Hopper capacity TS 323 (250 l/ 280 l with rubber collar) Chassis 1,900 kg chassis, skid frame with 1,900 kg chassis, skid frame with with brakes mountings for fork-lift with brakes mountings for fork-lift Weight 1,850 kg 1,700 kg 1,800 kg 1,650 kg Length 4,200 mm 3,067 mm 4,200 mm 3,067 mm Width 1,510 mm 1,393 mm 1,510 mm 1,395 mm Height 1,600 mm 1,395 mm 1,600 mm 1,395 mm Filling height 1,180 mm 973 mm 1,180 mm 973 mm Maximum grain size 16 mm 16 mm 16 mm 16 mm Discharge connection SK 4.5 SK 4.5 SK 4.5 SK Further information is available in brochure MM For suggested accessories for various applications see pages For additional accessories see page 96 ff

20 Suggested accessories for P 715 Suggested accessories for P 715 Delivery line for fine concrete, mortar, self levelling floor screed, SK 50, 60 bar, 8 mm grain size Complete Set, : Standard delivery line 100 m long, consisting of: Part Fig. 4x Clamp coupling SK x Seal DN 100, x Spring cotter x Elbow pipe SK x T-delivery pipe SK 100, 4.5, 1,000 mm x Pressure gauge SK 100, 4.5, 100 bar x Reduction pipe 100 / / 3, 1,500 mm x Clamp coupling SK, x Seal DN 65, x Elbow pipe SK 50, 3, x Delivery pipe SK 50, 3, 1,000 mm x Delivery pipe SK 50, 3, 2,000 mm x Delivery pipe SK 50, 3, 3,000 mm x Elbow pipe SK 50, 3, x Delivery hose 3, SK 50, 3, mm x Sponge rubber ball, ø 60 mm additional accessories: 1x Lid for T-delivery pipe, Delivery line for mortar, self levelling floor screed, PM 50, 40 bar, 8 mm grain size Complete Set, : Standard delivery line 80 m long, consisting of: Part Fig. 4x Clamp coupling SK x Seal DN 100, x Spring cotter x Elbow pipe SK 100, 4.5, x T-delivery pipe SK 100, 4.5, 1 m x Pressure gauge SK 100, 4.5, 100 bar x Reduction pipe SK 100 / SK 65 / 3, 1.5 m x Clamp coupling SK x Seal DN 65, x Transmission piece SK 50 / RA x PM coupling V50 / RI x Mortar hose DN 50, 40 bar, 13.3 m x Sponge rubber ball, ø 50 mm additional accessories: 1x Lid for T-delivery pipe Concrete spray line SK 65 / PM 50 / 3 ; max. 40 bar, 8 mm grain size Delivery line for fine concrete, mortar, self levelling floor screed, SK 65, 85 bar, 12 mm grain size Complete Set, : Standard delivery line 100 m long, consisting of: Part Fig. 4x Clamp coupling SK 4, x Seal DN 100, 4, x Spring cotter x Elbow pipe SK 100, 4.5, x T-delivery pipe SK 100, 4.5, 1,000 mm x Pressure gauge SK 100, 4.5, 100 bar x Reduction pipe 100 / / 3, 1,000 mm x Clamp coupling SK x Seal DN 65, x Elbow pipe SK 65, 3, x Delivery pipe SK 65, 3, 1,000 mm x Delivery pipe SK 65, 3, 2,000 mm x Delivery pipe SK 65, 3, 3,000 mm x Elbow pipe SK 65, 3, x Delivery hose SK 65, 3, 5,000 mm x Sponge rubber ball, ø 65 mm additional accessories: 1x Lid for T-delivery pipe, Complete Set, : Standard delivery line 50 m long, consisting of: Part Fig. 4x Clamp coupling SK x Seal DN 100, x Spring cotter x Elbow pipe SK 100, 4.5, x T-delivery pipe SK 100, 4.5, 1 m x Pressure gauge SK 100, 4.5, 100 bar x Reduction pipe SK 100, 4.5 -SK 65, 3, 1 m Part Fig. 11x Clamp coupling SK x Seal DN 65, x Delivery hose SK 65, 3, 5 m x Reduction pipe SK 65, 3 -SK 50, 3, 1,000 mm x Transmission piece x PM coupling M 50, x Mortar hose DN 50 TS PN 40, 13 m x Concrete spraying nozzle V 50, 30 mm x Air hose ¾, 20 m x Sponge rubber ball, ø 65 mm x Sponge rubber ball, ø 60 mm additional accessories: 1x Lid for T-delivery pipe Metering pump for accelerator (silicate): 1x Air hose ¾, 20 m x Silicate metering pump with compressed air drive (barrel pump) with connector 2x High-pressure hose ½, 20 m

21 Suggested accessories for P 715 High pressure concrete spray line, SK 65 / SK 50, 3'', max 85 bar, 10 mm grain size Flexible delivery line for fine concrete, mortar, self levelling floor screed, NW 100 / 4.5,85 bar, 16 mm grain size Complete Set, : Standard delivery line 60 m long, consisting of Complete Set, : Standard delivery line 50 m long, consisting of: 1,2,3 1,2, ,2, Part Fig. 4x Clamp coupling SK x Seal DN 100, x Spring cotter x Elbow pipe SK 100, 90, x T-delivery pipesk 100, 4.5, 1,000 mm x Pressure gauge SK 100, 4.5, 100 bar x Reduction pipe SK 100, SK 65 / 3, 1 m x Clamp coupling SK x Seal DN 65, x Delivery hose SK 65, 3, 5,000 mm x Reduction pipe SK 65, 3 - SK 50, 3, 1,000 mm x Delivery hose SK 50, 3, 5,000 mm x Transmission piece SK 50, 3 auf 2, IG x Concrete spraying nozzle with rubber nozzle 2, AG x Sponge rubber ball, ø 60 mm x Sponge rubber ball, ø 80 mm x Air hose 3/4, 20 m x Spare rubber nozzle Part Fig. 22x Clamp coupling SK x Seal DN 100 / x Spring cotter x Elbow pipe SK 100 / 90, 4, x T-delivery pipesk 100 / 4.5, 1000 mm x Pressure gauge SK 100 / 4.5, 100 bar x Delivery hose SK 100 / 4.5, 2850 mm x Sponge rubber ball, ø 100 mm Additional accessories: 1x Lid for T-delivery pipe x Manual gate valve GVM 2/2 SK 100 / x Delivery hose SK 100 / 4.5, 5 m additional accessories: 1 x Lid for T-delivery pipe x PM pumping aid, 18 l in storage tank, 25 pcs ,2, ,2,3 8,9,3 8,9,3 8,9,3 8,9, Delivery line for fine concrete, mortar, self levelling floor screed, SK 100 / 4.5, 85 bar, 16 mm grain size Complete Set, : Standard delivery line 100 m long, consisting of: Part Fig. 48x Clamp coupling SK x Seal DN 100, x Spring cotter x Elbow pipe SK 100 / 90, x T-delivery pipesk 100 / 4.5, 1,000 mm x Pressure gauge SK 100, 4.5, 100 bar x Delivery pipe SK 100 / 4.5, 3,000 mm x Delivery pipe SK 100 / 4.5, 2,000 mm x Delivery pipe SK 100 / 4.5, 1,000 mm x Elbow pipe SK 100 / 4.5, x Delivery hose SK 100 / 4.5, 2,850 mm x Sponge rubber ball, ø 100 mm additional accessories: 1x Manual gate valve GVM 2/2, SK x Lid for T-delivery pipe, x Pipe clamp for wall or floor x Delivery pipe 5,000 mm As an alternative to individual SK couplings and seals, you have the option of using SKD couplings with halved seals already integrated: Part Part No. SKD 4, SKD

22 Piston pump Fine concrete pumps P 718 Compact trailer fine concrete pump with S-valve for up to 32 mm grain The P 718 is operated entirely from one side.a From here, you always have the material flow from the truck mixer in view. The large hopper need only to be folded away to the side for easy maintenance or cleaning. The agitator is already open and easily accessible in front of you. Once the hood is open, all maintenance and service areas can be accessed quickly and conveniently from here. P 718 TD The new P 718 offers all the advantages of its little sister the P 715 and is ideal for pumping fine concrete with a grain size of up to 32 mm in addition to traditional liquid screed applications. P 718 TD 3-cyl. diesel engine Deutz motor, complies with the current COM III exhaust emissions standard T-chassis, approved for road use Stable support feet for a reliable foothold Plastic engine hood and TARGA hoop Hopper with agitator and rubber collar Folding 30 mm safety grid screen with 12 volt vibrator safety shutoff for agitator Hopper with flap for emptying and cleaning Folding hopper attachment 2-cylinder piston pump with hard-chrome-plated delivery cylinders and a water box between the drive and delivery cylinders to flush the pistons and cool the piston rods It is possible to replace the pistons through the water box Hydraulic control of pump and S-valve. Infinitely variable pumping rate, manually adjustable Central lubrication manifold Lifting ring Standard equipment: cleaning accessories, toolbox with tools, protective helmet (yellow), operating manual and spare parts list P 718 SD Identical to P 718 TD, instead of chassis: skid frame with mountings for fork-lift P 718 TDS Identical to P 718 TD, but with rod-side drive for increased output at lower pressure on request Supplementary equipment Part Central lubrication system Cable remote control, electric, 5 m (pump on / off, reverse pumping, emergency off) Particle filter exhaust system on request Radio remote control with transmitter and receiver (pump on / off, reverse pumping, emergency off) High-pressure cleaner, 140 bar installation kit l/ h with spray gun and 8 m high-pressure hose Flushing water pump, 20 bar, 80 l/min on request installation kit Working light, 12 V, 50 Watt Halogen End pipe with flap Remote control cable, 10 m Remote control cable, 20 m Remote control cable, 50 m Ball hitch Special paint for hood (RAL colour) on request 13-pin to 7-pin adapter socket pin to 13-pin adapter socket Technical data P 718 TD P 718 SD P 718 TDS Machine type trailer pump stationary pump trailer pump Pump 2-cyl. piston pump, hydraulically driven Theor. delivery rate (piston side) 17.4 m 3 /h 17.4 m 3 /h 24 m 3 /h Theor. delivery pressure (piston side) 70 bar 70 bar 50 bar* Cylinder diameter 150 mm 150 mm 150 mm Diameter piston stroke 700 mm 700 mm 700 mm Strokes per minute (minimum) Drive cylinder diameter 80 / 45 mm 80 / 45 mm 80 / 45 mm Drive motor 3-cyl. diesel engine Deutz F3M 2011, 34.5 kw Hopper capacity 360 l Chassis T-chassis, Knott skid frame with T-chassis Knott 2,500 kg, with brakes mountings for fork-lift kg, with brakes Weight 2,450 kg 2,300 kg 2,450 kg Length 4,341, max mm 3,025 mm 4,503 mm Width 1,600 mm 1,270 mm 1,600 mm Height 1,750 mm 1,559 mm 1,750 mm Filling height 1,180 mm 1,120 mm 1,180 mm Maximum grain size 32 mm 32 mm 32 mm Discharge connection SK 5.5 SK 5.5 SK on request on request Machine + high pressure cleaner +radio remote control Machine + high pressure cleaner * Theor. delivery pressure and rate, rod-side drive Further information is available in brochure MM For suggested accessories for various applications see pages For additional accessories see page 96 ff

23 Suggested accessories for P 718 Suggested accessories for P 718 Delivery line for fine concrete, mortar, self levelling floor screed, ID 125, 5.5, 85 bar, 32 mm grain size Complete Set, : Standard delivery line 100 m long, consisting of: Part Fig. 60x Clamp coupling SK x Seal x Spring cotter x Elbow pipe SK 125, r=275 HD x T-delivery pipe SK 125, 5.5 1,000 mm x Pressure gauge SK 125, bar x Delivery pipe SK 125, 5.5, 1000 mm x Delivery pipe SK 125, 5.5, 2,000 mm x Delivery pipe SK 125, 5.5, 3,000 mm x Elbow pipe SK 125, 5.5, 45, x Elbow pipe SK 125, 5.5, 30, x Delivery hose SK 125, 5.5, 3,000 mm x Sponge rubber ball D150, medium x Sponge rubber ball D150, hard Additional accessories: 1x Manual gate valve GVM 2/2 130 bar x Wash-out port lid SK 125, x Support holder for end hose x Pipe clamp for wall or floor Flexible delivery line for fine concrete, mortar, self levelling floor screed, ID 125, 5.5, 85 bar, 32 mm grain size Complete Set, : Standard delivery line 100 m long, consisting of: Part Fig. 60x Clamp coupling SK x Seal x Spring cotter x Elbow pipe SK 125, x T-delivery pipe SK 125, 5.5, 1,000 mm x Pressure gauge SK 125, 5.5, 100 bar x Delivery hose SK 125, 5.5, 2,000 mm x Delivery hose SK 125, 5.5, 5,000mm x Sponge rubber ball D150, medium x Sponge rubber ball D150, hard x End hose SK 125, 5.5, 3,000 mm Additional accessories: 1x Lid for T-delivery pipe, x Delivery hose SK 125, 5.5 3,000 mm x Delivery hose SK 125, 5.5, 4,000 mm x Support holder for end hose x PM hose caddy, complete For additional accessories, like manual distributors or manual gate valves, etc. see page 96 ff

24 Suggested accessories for P 718 Suggested accessories for P 718 Delivery line for fine concrete, mortar, self levelling floor screed, ID 100 / 4.5, 85 bar, 16 mm grain size Complete Set, : Standard delivery line 100 m long, consisting of: Part Fig. 6x Clamp coupling SK x Seal, x Spring cotter x Elbow pipe SK x T-delivery pipesk 125, 5.5 ; 1,000 mm x Pressure gauge SK 125, bar x Reduction pipe SK 125, 5.5'', SK100, 4, ,000 mm 50x Clamp coupling SK x Seal DN 100, x Delivery pipe SK 100, 4.5, 3,000 mm x Delivery pipe SK 100, 4.5, 3,000 mm x Delivery pipe SK 100, 4.5, 3,000 mm x Elbow pipe SK 100, 4.5, x Elbow pipe SK 100, 4.5, x End hose SK 100, 4,5, 2,850 mm x Sponge rubber ball DN120, ø 100 mm Additional accessories: 1x Lid for T-delivery pipe, x Pipe clamp for wall or floor Flexible delivery line for fine concrete, mortar, self levelling floor screed, ID 100 / 4.5, 85 bar, 16 mm grain size Complete Set, : Standard delivery line 100 m long, consisting of: Part Fig. 6x Clamp coupling SK x Seal x Spring cotter x Elbow pipe SK 125, 90, x T-delivery pipe SK 125, mm x Pressure gauge SK 125, bar x Reduction pipe SK 125, 5.5, SK 100 / ,000 mm 50x Clamp coupling SK 100, x Seal DN 100, x Delivery hose SK 100, 4.5, 2,850mm x Sponge rubber ball DN 120, ø 100 mm Additional accessories: 1x Lid for T-delivery pipe, Optional: 1x Delivery hose SK 100, 4.5, 5,000mm For additional accessories, like manual distributors or manual gate valves, etc. see page 96 ff

25 Application overview Plastering machines Machines for mortars and plasters No matter what you want: the right Putzmeister machine helps you to tackle most different operations in surface and underground engineering, and in the construction industry. Dry mixed mortar (bag/ silo/ container goods) Plastic mortar/ Construction- Dispersion plasters site mixes Machine- Ground coat plasters Mineral Special plasters Fine Ma- Re- SPCC- All wet mortars Indoor plaster Exterior plaster Magypsum plasters bonding plasters sonry fractory- mortar (in the container (mix design 1:3) (mix design 1:3) sonry mortar mortar mortar or bucket) mortar < 2mm < 4 mm Note: Always use a machine-compatible mortar in combination with machine technology. If you have any questions, please contact the material manufacturer or contact us directly. Ideal Conditional Not suitable Gypsum machine plasters Gypsum lime machine plasters Lime mortar Lime and cement mortar Cement mortar Lime mortar Lime and cement mortar Cement mortar Lightweight plasters Insulating plasters Bonding/ reinforcement mortar Sprayed rendering Floating and set Rough coat Felt and floated plasters Plaster fillers Floating and set Bonding mortar Lime plasters Lime gypsum plasters Lime-cement plasters Cement plasters Mixer pumps MP 10 / MP 12 / MP 22 / MP 25 Pages Conveying units FA 400 / FA 420 / FAT 400 / FAT 420 Pages Worm pumps Sprayboy P12 Pages S 5 / SP 5 Pages Continuous mixer CM Pages Worm pumps SP 11 Beliso series Pages Piston pumps P 13 Pages

26 Plastering machines Mixer pumps Mixer pumps MP 10, MP 12 Fully-fledged mini-mixer pumps Simply release the toggle locks of your MP 12 (MP 10 has wedge closures). You simply remove the motor and pump units in one. Here you can set the water rate conveniently and accurately. The operating elements are located centrally and are well protected to the rear of the two mixing pumps (MP 12 shown here). MP 12 for filling by hand / from a bag The smallest Putzmeister mixing pumps of all time. And although it's hard to believe, they both offer everything you have come to expect from a genuine Putzmeister mixing pump: continuous mixing, good output, dismantlability and a comprehensive range of fittings as standard. Ideal machines for small companies, smaller jobs and situations where only a 230 V power supply is available. MP 10 Small and powerful electric motor, detachable, with wedge closing device (MP 12) or toggle lock (MP 10) Compact unit with perfectly matched motor and frequency inverter Large hopper with hinged grille and bag opener Compressor with pressure cut-off Detachable mixing zone Pneumatic remote control Integrated water pump with flow and pressure regulation Compressor with pressure switch-off Easily accessible flow meter for modifying the water quantity Standard equipment: 10 m mortar hose, 10 m air hose, spray gun V 25-40, operating manual and spare parts list MP 12 Identical to MP 10, with hinged bracket for optional compressor MP 10 for use with site-made mixes Special voltage configurations are available on request. Supplementary equipment MP 10 / MP 12 Part Mixing spiral for lightweight plaster Technical data MP 10 MP 12 Drive motor 1.5 kw, rpm 1.5 kw, rpm Pump type N13S N13S Voltage 230V 50 Hz + 60 Hz 230V 50 Hz + 60 Hz Theor. delivery rate* l/min** l/min** Delivery pressure max 30 bar max 30 bar Air compressor 230 V 50 Hz + 60 Hz, 180l/min 230 V 50 Hz + 60 Hz, 180l/min Tank capacity 40 l 40 l Weight (approx.) 90 kg 90 kg Length 1,500 mm 1,500 mm Width 530 mm 620 mm Height 790 mm 1,020 mm Filling height 600 mm 900 mm Maximum grain size 4 mm 4 mm Discharge connection V V * The delivery rate depends on the rotor/ stator and pump speed (rpm). Depending on the speed, the delivery rate may be higher or lower. ** Constant 16 l/min with mixing pump operation The MP 10 / MP 12 can be used as a mixing pump or as a worm pump. Further information is available in brochure MM For additional accessories see page 102 ff

27 Plastering machines Mixer pumps Mixer pump MP 22 The small mixer pump for refurbishers, painters and small teams All connections and operating elements are at the rear outside the contamination zone. The MP 22 can be used wherever bagged goods are used. The MP 22 has a wide channel to the mixing zone. This means the dry material can flow through more easily. The MP 22 is compact, light-weight and robustly mounted and is therefore the ideal machine when there is no need for a large machine. Nevertheless the MP 22 is a typical Putzmeister mixer pump. It can be dismantled into modules that can be carried and it handles all types of pre-blended dry mortar, and for easy transport it is unbelievably compact. It is ideal for internal plasters (gypsum/ gypsum-lime plaster), external render (lime/ cement-lime and insulating plasters), self levelling floor screed, bonding mortar as well as reinforcement mortar. MP 22 large hopper with bag opener Easily accessible flow meter for modifying the water quantity Conical mixing tube Possibility to connect an electric remote control Compressor with pressure switch-off An electric supply cable with CEE plug 5 x 2.5 mm 2, 16 amp is recommended. Standard equipment: 1 x mortar hose 10 m, 25 / 40 mm, air hose 10m, spray gun, cleaning tools, reduction piece V 35 / V25, operating instructions, standard tools and spare parts list MP V Same as MP 22, but as single phase 230 V / 50 and 60 Hz version, and additional pump test pressure device Special voltage configurations are available on request. Supplementary equipment MP 22 Part Without air hose and compressor (reduced prize) Remote control cable 60 m with toggle switch Remote control cable 20 m with toggle switch Water inlet nozzle 4.5 ø x 55 mm Flow meter l/h (for D4 1 2 and D4 1 4) cpl., bypass Flow meter 300-1,100 l/h Water connection piece for hose cleaning Geka/ V Water booster pump V, 50 Hz, 2.4 m 3 /h Additional pressure increase pump, V, 2.500l/ h, 2,5 bar Additional pressure increase pump x 400 V / CEE l/h Additional pressure increase pump NT without automatic switching, 3 x 400 V Standard mixing shaft MP Supply cable with CEE plug x 2,5 mm 2, 16 Amp. Technical data MP 22 MP V Pump type D6 Power D6-2 Theor. delivery rate* 25 l/min 16 l/min Delivery pressure 40 bar 20 bar Delivery distance** up to 40 m horiz., up to 15 m high up to 15 m horiz., up to 10 m high Air compressor 200 l/min 180 l/min 0.55 kw 0.52 kw + 60 Hz Drive motor 400 V / 50 Hz / 5,5 kw / 389 UpM 230 V / 50 Hz + 60 Hz / 4 kw / 366 UpM Tank capacity 50 l 50 l Weight (approx.) 160 kg 165 kg Length 1,200 mm 1,120 mm Width 660 mm 660 mm Height 1,276 mm 1,269 mm Filling height 1,084 mm 1,072 mm Maximum grain size 4 mm 3 mm Discharge connection M 35 M * The delivery rate depends on the rotor/ stator and pump speed (rpm). Depending on the speed, the delivery rate may be higher or lower. ** The data is based on experience and is dependent on the materials used. Further information is available in brochure MM For suggested accessories for various applications see pages For additional accessories see page 102 ff

28 Suggested accessories for mixer pump MP 22 Suggested accessories for MP 22 Accessories for levelling compound Complete Set, : Standard delivery line 20 m long, consisting of: Part Fig. 5x Seal ID x Mortar hose ID 25, 10m x Sponge rubber ball ID x Electric remote control with On/ Off switch 20 m 3x PM hose holder, made of leather Optional accessories: 2x Electric radio remote control with On / Off switch 60 m Accessories for bonding mortar, reinforcement mortar, structural plaster (low performance 12 or 6 l/min) Complete Set, : Standard delivery line 20 m long, consisting of: Part Fig. 1x Pump parts D4 1 2 (12 l/min) 1 Rotor D Stator D x Discharge meter l/min x Insertion nozzle ø 4,5 mm x 55 mm x Hose line ID Hose line ID 25-40, 10 m x Extension cable 20 m x Sponge rubber ball ID x Seal ID x Air hose 1/2, 20 m x Large fine plaster spraying machine with PM coupling and Geka air connection 3x PM hose holder, made of leather Optional accessories: 1x Pump parts D4 1 4 (6 l/min) 1 Rotor D Stator D x Adhesive gun DN 17 / M with shut-off valve and electrical connection for remote control 1x Spray gun ID Accessories for plaster/ stucco (high performance 40 l/min) Complete Set, : Standard delivery line 30 m long, consisting of: Part Fig. 1x D8-2 stator x D8-2 rotor x Spray gun short, straight V x Mortar hose ID 35, kpl. 13,3 m lang x Air hose 1/2, 20 m x Sponge rubber ball ID x Seal ID x PM hose holder, made of leather Optional accessories: 52 53

29 Plastering machines Mixer pumps Mixer pumps MP 25 MIXIT + MP 25 Machine with large supply hopper for dry mixed mortar FMP 60 The large hopper and the low filling height makes it distinctively more convenient and makes your work easier. Material container and mixing tube are separated from each other. You open the gate valve and the material flows into the mixing tube. The MP 25 MIXIT can be dismantled into manageable, portable assemblies in no time at all. Easy to disassemble, but difficult to outperform. The MP 25 is a true allrounder. Suitable for all pumpable ready-mixed dry mortars, whether from a bag or from a silo, for example interior-use plaster (gypsum/ gypsumlime plaster), external render (lime/ lime cement and insulating plaster), self levelling floor screed, cementitious adhesive and reinforcement mortar. Different pump parts and versions vary your mixing and pumping output of approximately 5-80 l/min. FMP 60 MP 25 Version for processing liquid screed from a bag at high power without a compressor, without air fittings and control, with a special mixing spiral and a modified mixing pipe flange Standard equipment: mixing shaft, Remote control cable 20m with toggle switch, cleaning tools, operating instructions and spare parts list Technical data MP 25 MIXIT FMP 60 MP 25 Pump type D6 Power R8 1.5 Theor. delivery rate* 25 l/min 80 l/min Delivery pressure 40 bar 25 bar Delivery distance** up to 40 m horizontally, 15 m high up to 40 m horizontally, 15 m high Air compressor 0.55 kw / 200 l/min Drive pump 400 V / 50 Hz / 5.5 kw bei 392 rpm 400 V / 50 Hz / 5.5 kw bei 321 rpm Drive hopper 1.1 kw at 23 UpM 1.1 kw bei 23 UpM Tank capacity 115 l 115 l Water pump 0.78 kw at 3.4 m 3 /h 0.78 kw at 3.4 m 3 /h Weight 240 kg 245 kg Length 1,324 mm 1,318 mm Width 728 mm 765 mm Height 1,443 mm 1,453 mm Filling height 984 mm 984 mm Maximum grain size 4 mm 4 mm Discharge connection M 35 M MP 25 MIXIT Powerful electric motor Large storage hopper Conical mixing tube Integrated water pump Compressor with pressure switch-off Compressed air remote control Can be dismantled into practically sized assemblies Easily accessible flow meter for modifying the water quantity A supply cable with CEE plug 5 x 2.5 mm 2, 32 A is recommended here. Standard equipment: 1 x mortar hose 15 m, 25 / 40 mm, 1 x air hose 15 m, 1 2 Hose adapter V35 / V25, spray gun ID 25 / 40, mixing shaft, cleaning tools, operating instructions, standard tools and spare parts list Special voltage configurations are available on request. Supplementary equipment Part Filter hood with control cable, probe, rectangular Water filter 5 m 3 /h, 3 4 GEKA Insulating plaster hopper extension Mixer shaft for insulating plaster Mixer shaft for bonding mortar Construction site electric supply cable with CEE-plug, 32 Amp, 50 m 5 x 2.5 mm Water hose, GEKA, coupling 3 4 NW, 40 m CEE coupling socket Reduction NW 35 / NW Water suction hose Only for MP 25 FMP 60 version: Reduction R8 - D Pumpe O-ring für reduction R8 - D pump * The delivery rate depends on the rotor/ stator and pump speed (rpm). Depending on the speed, the delivery rate may be higher or lower. ** The data is based on experience and is dependent on the materials used. Further information is available in brochure MM For suggested accessories for various applications see pages For additional accessories see page 102 ff

30 Suggested accessories for mixing pump MP 25 Suggested accessories for MP 25 Accessories for preblended dry mortar (high performance 40 l/min) Accessories for cement, reinforcement mortar, structural plaster (low performance 12 or 6 l/min) Complete Set, : Standard delivery line 30 m long, consisting of: Part Fig. 1x Pump parts D8-2 1 Rotor D Stator D x Universal mixer shaft MP x Spray gun short, straight V x Mortar hose ID 35, 13.3 m x Air hose 1/2, 20 m x Sponge rubber ball ID x Seal ID x PM hose holder, made of leather Optional accessories: Complete Set, : Standard delivery line 20 m long, consisting of: Part Fig. 1x Pump parts D4 1 2 (12 l/min) 1 Rotor D Stator D x Cementitious adhesive mixer shaft for MP x Discharge meter l/min x Insertion nozzle ø 4.5 mm x 55 mm x Hose line ID Hose line ID 25-40, 10 m x Fine plaster spray gun large, with PM-coupling and Geka Air hose connection 5x Sponge rubber ball ID x Seal ID x Air hose 1/2, 20 m x PM hose holder, made of leather Optional accessories: 1x Pump parts D4 1 4 (6 l/min) 1 Rotor D Stator D Part Fig. 1x Discharge meter as bypass ( l/min) for D4 1 2 and D x Adhesive gun DN 17 / M with shut-off valve and electrical connection for remote control 1x Extension cable 20 m Accessories for insulating plaster (high performance 40 l/min) Complete Set, : Standard delivery line 40 m long, consisting of: Part Fig. 1x Pump parts D8-2 1 Rotor D Stator D x Mixer shaft for insulating plaster MP x Spray gun with shut-off valve ID x Air hose 1/2, 20 m x Seal ID x Sponge rubber ball ID x Insulating plaster attachment collar ID x Dynamat additional mixer with own kw, 400 V drive motor and mixer speed of 632 rpm as well as 2 m hose ID 35 and connecting cable to mixing pumps 3x Mortar hose ID 35, cpl m x PM hose holder, made of leather Optional accessories: Accessories for self levelling floor screed processing with Dynamat additional mixer (performance up to 40 l/min) Complete Set, : Standard delivery line 40 m long, consisting of: Part Fig. 1x Pump parts D8-2 1 Rotor D Stator D x Seal ID x Sponge rubber ball ID x Dynamat additional mixer with 2.2 kw drive motor and 632 rpm mixer speed to be integrated in mortar line and 2 m hose ID 35 1x Electric remote control with On/ Off switch 60 m x Mortar hose ID 35, cpl m x Discharge meter 160-1,600 l/h Optional accessories: 56 57

31 Suggested accessories for mixing pump MP 25 Accessories for self levelling floor screed with Uni mixer (performance up to 40 l/min) Complete Set, : Standard delivery line 40 m long, consisting of: Part Fig. 1x Uni mixer cpl. with tie bolt + union nuts Pump parts: 1 x Stator D x Rotor D8-2 with pin x Discharge pressure gauge x Electric remote control, 4 with ON/ OFF switch, 60 m long x Mortar hose ID 35, 13.3 m x Discharge meter 160-1,600 l/h x Sponge rubber ball ID x Seal ID x Spacer plate x Hexagon head bolt M 10 x Accessories for self levelling floor screed; with MP 25 FMP 60 only! Complete Set, : Standard delivery line 40 m long, consisting of: Part Fig. 1x Pump parts R Rotor R Stator R x Seal ID x Sponge rubber ball ID x Electric remote control, 4 with ON / OFF switch 60 m long x Mortar hose 35, cpl m x Mixer shaft Optional accessories: Optional accessories: Accessories for preblended dry mortar from silo Complete Set, : Standard delivery line 30 m long, consisting of: Part Fig. 2x Mortar hose ID 35, cpl m x Air hose 1/2", 20 m x Seal ID x Sponge rubber ball ID x Feed hood with control cable and probe, rectangular 3x PM hose holder, made of leather x Spray gun short, straight V Accessories for preblended dry mortar Complete Set, : Standard delivery line 20 m long, consisting of: Part Fig. 2x Mortar hose ID 25-40, 10 m x Spray gun ID x Seal ID x Sponge rubber ball ID x PM hose holder, made of leather Optional accessories: Optional accessories: For further details see pages 60 /

32 Conveying units Conveying units Conveying units FA 400, FAT 400, FA 420, FAT 420 The special dry conveying units for silo operation The conveying system can be operated fully automatically via the control cabinet. The FA 420 offers ample space under the hood for the delivery tank, an air injection hood and other accessories. The lightweight, manoeuvrable delivery container on the conveying system with actuator drive. The ideal complement to the MP 22, MP 25 and other mixer pumps. The economic dry conveying unit. It is optimally tuned to the performance of the mixer pumps that are used everyday. It transports pneumatically dry plasters or similar materials from every standard vessel, silo or container fully automatically into the plastering machines. FA 400 Pneumatic conveying system without silo ventilation Delivery vessel 65 l, delivery rate up to 3.2 t/ h Control cabinet with 3p probe incl. automatic phase detector A supply cable with CEE plug 5 x 4 mm 2, 32 A is recommended here. Standard accessories: 1 coupl. socket 5p 32 A, 1 air hose, 7 m, 2xBC sickle spanner FA 420 Pneumatic conveying system without silo ventilation (retrofit part) Delivery vessel 65 l, delivery rate approx. 3,6 t/h Control cabinet with probe 42 V/ 3 pin, incl. automatic phase detector and pressure monitor control A supply cable with CEE plug 5 x 4 mm, 32 A is recommended here. Standard equipment: 1 air hose 5 m, size 1, 2 hose sickle spanners BxC FAT 420 Same as FA 420, but as stationary version without chassis and silo aspiration Special voltage configurations are available on request. Technical data FA 400 FAT 400 FA 420 FAT 420 Silo connection DN 250 LK 300 mm, with quick-action couplings Chassis 450 kg, F 80, stationary 450 kg, F 80, stationary brakeless brakeless Drive motor 400 V, 25 A, 32 A plug, 400 V, 25 A, 32 A plug, semi automatic, phase recognition semi automatic, phase recognition Compressor 5.5 kw S1, 1,450 rpm, 96 m 3 /h, 7.5 kw, 1,400 rpm, 129 m 3 /h, 2.8 bar, oil-lubricated 2.5 bar, dry-running compressor, air cooled Air fittings 1, with pressure monitoring, prepared 1 ¼, with pressure monitoring, prepared for connection silo ventilation for connection silo ventilation Probe connection 3p, 42 VAC, 16 A, rotary wing or capacitive system Hose connection Light alloy coupling, system Storz, size C (LM C) Delivery vessel 65 l, 59 kg, 945 mm 65 l, 59 kg, 945 mm 65 l, 59 kg, 945 mm 65 l, 59 kg, 945 mm Theor. delivery rate* e. g. 3.2 t/h, 50 m, density 1.2 kg/dm 3 e. g. 3.6 t/h, 50 m, density 1.2 kg/dm 3 Delivery distance* 150 m 150 m 150 m 150 m Weight 340 kg 137 kg 410 kg 180 kg Length mm 1,060 mm 2,330 mm 1,050 mm Width 1,420 mm 460 mm 1,325 mm 560 mm Height 1,115 mm 560 mm 1,270 mm 560 mm * depends on the material used and configuration of the hoses FAT 400 Same as FA 400, but as stationary version without chassis and silo ventilation Supplementary equipment Part Fig. Filter hood, round, cpl. with rotary wing probe, 42 V compact filter for MP 25 Delivery hose PVC DN 38 x 12.5 m Delivery hose, PVC DN 38 x 25 m Pneumatic delivery hose, rubber, DN 38 x 12.5 m Pneumatic delivery hose, rubber, DN 38 x 25 m Exterior vibrator, 230 / 400 V, 50 Hz, 160 Watt with 5 m cable, CEE plug, 16 A, 5-pole Control cable 50 m for probe 42 V 3p Control cable 20 m for probe 42 V 3p Sack-filling hopper 80 l Sickle spanner Filter hoods for other mixer pumps are supplied adapted to the PMM conveying system. Alternative: Stationary version 60 61

33 Worm pumps Mortar spraying systems Sprayboy P 12 The flexible mixer and pump unit In the central control cabinet, the electrical system is easily accessible at all times which makes maintenance work easier. Discharge connection with pressure gauge for connection of the mortar hoses. The large Sprayboy hopper, in which material is mixed before pumping. The small mortar pump, ideal mixing, pumping and spraying cemetitious adhesive, thin skim coat, fire-protection mortar, etc. from a hopper. Just the right machine for those working with building protective agents or stucco, carrying out renovation and repair work. Suitable for: e.g. anti-drumming compounds, levelling compounds, refractory mortar, sealing compounds, joint and casing mortar, paint com pounds, priming coats, bonding mortars, refurbishing mortar, fillers, filling mortars, etc. Standard equipment: Electric remote control cable 21 m, reduction connecting piece V 35 / V 25-40, operating manual, standard tools (P 12) (P V ) Special voltage configurations are available on request. Technical data P 12 P V Pump type D5 short D4 red Theor. delivery rate* l/min 4.5 l/min Delivery pressure 25 bar 25 bar Delivery distance** up to 30 m horizontally, 15 m high up to 20 m horizontally, 5 m high Drive motor 400 V / 50 Hz + 60 Hz, 16 A, 5p, 6h, CEE plug 230 V / 50 Hz + 60 Hz, 25 A, 3p, CEE plug Drive pump 1.4 kw at 94 rpm / 1.8 kw at 188 rpm 1.7 kw at 96 rpm Vessel content 50 l 50 l Weight 125 kg 128 kg Length 714 mm 714 mm Width 696 mm 696 mm Height 1,437 mm 1,437 mm Filling height 939 mm 939 mm Maximum grain size 4 mm 3 mm Discharge connection M 35 M * The delivery rate depends on the rotor/ stator and pump speed (rpm). Depending on the speed, the delivery rate may be higher or lower. ** The data is based on experience and is dependent on the materials used. Sprayboy P 12 (P V ) Electric worm pump drive large hopper Two-stage speed transfer We recommend an inlet cable with CEE plug 5 x 2.5 mm 2, 16 Amp. (input 3 x 2.5 mm 2, 230 V plug). For plastering, a compressor (> 200 l/min) is required which must be supplied at the construction site. For texturing spray work, a compressor with at least 600 l/min air performance is required. Supplementary equipment Part Extension for remote control cable, 20 m (binder) Pneumatic remote control cpl. (binder) Compressor HANDY, 250 l/min, V / 50 Hz 3-phase Compressor HANDY, 250 l/min, V / 50 Hz 1-phase Compressor V-MEKO 400, 360 l/min, V / 50 Hz 3-phase For all MEKO compressors, you require: Geka coupling Supply cable with CEE plug x 2.5 mm 2, 16 Amp. Supply cable with shock proof plug 230 V x 2.5 mm 2 Further information is available in brochure MM For suggested accessories for various applications see pages For additional accessories see page 102 ff

34 Suggested accessories for Sprayboy P 12 Suggested accessories for Sprayboy P 12 Accessories for filling between frame connectors and walls with fire-retardant mortar Complete Set, : Standard delivery line 20 m long, consisting of: Part Fig. 2x Mortar hose ID 25, 10 m x Frame connector filling pipe 30 cm M x Sealing ID x Sponge rubber ball ID x Electric remote control, with ON/ OFF switch, 20 m 3x PM hose holder, made of leather Optional accessories: Accessories for filling between frame connectors and walls with fire-retardant mortar Complete Set, : Standard delivery line 20 m long, consisting of: Part Fig. 1x Mortar hose ID 25, 10 m x Seal ID x Frame connector filling gun with remote control x Extension for remote control cable, 20 m x Sponge rubber ball ID x PM hose holder, made of leather Optional accessories: Accessories for finishing works Complete Set, : Standard delivery line 20 m long, consisting of: Part Fig. 2x Mortar hose ID 25, 10 m x Air hose 1 2, 20 m x Fine plaster spray gun, long x Sponge rubber ball ID x Seal ID x Compressor V-Meko with fuse x Geka-coupling x PM hose holder, made of leather Optional accessories: Accessories for anchor filling Complete Set, : Standard delivery line 20 m long, consisting of: Part Fig. 1x Reduction V35 / V x Seal ID x Pressure control device 2-32 bar x Mortar hose ID m x PM coupling M / RI 1' x Pressure gauge DN x Sponge rubber ball ID x PM hose holder, made of leather Optional accessories: 64 65

35 Worm pumps Mortar spraying systems Worm pump SP 5 The large 230 V- universal pump with compressor Operation is easy. Everything is well laid out and easy to reach. The 1L6 worm pump with pressure gauge and pressure connection. The electric motor and compressor are clearly laid out and easily accessible. The compressor can be easily taken from the machine if required. Technical data SP 5 Worm pump Theor. delivery rate* Delivery pressure Delivery distance** Drive motor Drive motor 1L l/min approx. 15 bar up to 40 m horizontally, up to 15 m high 4 kw electric motor, 230 V, 50 Hz 16 ampere-fuse, shock-proof plug The universal fine plastering machine with 230 V single phase drive is the same as the S 5 with regarding hopper volume. The 230 V drive motor allows it to be used everywhere where a 400 V connection is not available. The integrated compressor makes the SP 5 a complete plastering machine. The SP 5 processes almost all types of mortar, such as renovation plaster, dispersion plaster, injection, adhesive and reinforcing mortars with up to 6 mm granulation. A maintenance-free frequency inverter allows completely wear-free adjustment of the speed. Worm pump SP 5 with optional vibrating screen shown Standard equipment: pressure gauge at pressure outlet, cable remote control and compressed air remote control pump ON/ OFF, extension cable 20 m, 16 A 3-phase, 15 m air hose 1 2 ground coat spray gun V 35, operating instructions, reduction piece V 50 - M 35, emergency push button, spare parts list, standard tools and cleaning accessories Air compressor 0.52 kw, 230 V, 180 l/min, 3.5 bar Weight 190 kg Length 2,255 mm Width 675 mm Height 765 mm Hopper size 100 l Maximum grain size 6 mm Discharge connection M * The delivery rate depends on the rotor/ stator and pump speed (rpm). Depending on the speed, the delivery rate may be higher or lower. ** The data is based on experience and is dependent on the materials used. SP 5 Frequency inverter from Hz to adjust the pump speed to rpm. Possibility of connecting pneumatic and cable remote control. Worm pump easy to tighten due to standard series pump parts 1L6 with clip Compressor for spray and control air, 3.5 bar Compressor shutoff. Caution: Only use machine with frequency inverter via AC/DC sensitive FI and with 2.5 mm 2 cable diameters. Supplementary equipment Part Reduction piece V 35-V 25 / Remote control cable 20 m with toggle switch Safety cut-out with emergency shut-down key Construction site supply with V earthed connector, 3 x 2.5 mm 2, 20 m Adapter V50-M Vibrating screen, compl. for refitting (ID 10 mm + vibrator + switch) Further information is available in brochure MM For suggested accessories for various applications see pages For additional accessories see page 102 ff

36 Suggested accessories for SP 5 Suggested accessories for SP 5 Accessories for joint filling works Complete Set, : Standard delivery line 30 m long, consisting of: Part Fig. 1x Mortar hose ID 35 mm, V 50, M m x Mortar hose ID 35 mm, V 35, M m x Mortar hose ID 25 mm, V 35, V m x Seal ID x Sponge rubber ball ID x joint device D10 ID 25 / x Seal ID x Seal ID x PM hose holder, made of leather Optional accessories: Accessories for job site mixes Complete Set, : Standard delivery line 30 m long, consisting of: Part Fig. 1x Mortar hose ID 35 mm, V 50, M m x Mortar hose ID 35 mm, V 35, M m x Seal ID x Sponge rubber ball ID x Spray gun V 35, short x Seal ID x Air hose Geka 1/2"; 40 m x PM hose holder, made of leather Optional accessories: 1x Spray gun V Accessories for cement, reinforcement mortar, structural plaster Complete Set, : Standard delivery line 20 m long, consisting of: Part Fig. 1x Reduction piece V 50 - M x Mortar hose ID 25, V 35, V m x Mortar hose ID 35, V 35, V m x Seal ID x Sponge rubber ball ID x Air hose 1/2, 20 m x Fine plaster spray gun, large, with PM coupling x PM hose holder, made of leather x Seal ID Optional accessories: 1x Adhesive gun DN 17 / M shut-off valve and electrical connection for remote control 1x Extension cable 30 m x Spray gun ID Accessories for Monocouche (Monocapa) Complete Set, : Standard delivery line 30 m long, consisting of: Part Fig. 1x Mortar hose ID 35 mm, V 50, M m x Mortar hose ID 35 mm, V 35, M m x Mortar hose ID 25 mm, V 35, V m x Air hose Geka 1/2"; 40 m x Sponge rubber ball ID x Spray gun ID 25-40, short x Rubber fine plaster nozzle 8 mm x Rubber fine plaster nozzle 10 mm x Rubber fine plaster nozzle 12 mm x Rubber fine plaster nozzle 14 mm x Rubber fine plaster nozzle 16 mm x Elastic mortar nozzle D x PM hose holder, made of leather

37 Worm pumps Mortar spraying systems Worm pump S 5 Universal worm pump The S 5 EV/TM with additional pan mixer is used wherever materials have to be mixed intensively. The S 5 EVCM with additional continous mixer CM 928 for premixed dry mortar. The powerful S 5 EF for self levelling floorscreed. The universal worm pump for dry mix and wet mortar from bag or silo. The S 5 has a modular design. It is based on a powerful worm pump with a pumping rate of 40 l/min. The TM version is fitted with a pan mixer for the best mixing quality, the CM version has a continuous mixer for dry-mix mortar. Suitable for: ground coat plasters and insulating plasters, rough coat and textured plas ters, trowel plaster, adhesive bonded joint, masonry mor tar, refractory mortar, sealing suspensions, injection mortar, filling and anchoring mortar, dispersion plaster, fiber mortar, fibreglass concrete, bonding mortar, self levelling floor screed infinitely variable according to material from approx. 7 l/min to 40 l/min (floor screed up to 90 l/min with 2L74). S 5 EV Powerful electric vario drive large hopper Infinitely variable pumping rate Recommended is a power supply cable with CEE plug 5 x 4 mm 2, 32 Amp. If pumpable wet mortar is mainly pumped and sprayed, a compressor > 200 l/min must be available on site for the spraying work. For texturing spray work, a compressor with at least 600 l/min air output is required. Standard equipment: Set of wheels with pneumatic tyres, electric remote control cable 20 m, operating manual, standard tools S 5 EV with plugged cardan shaft Design and equipment identical to S 5 EV, but the new version has a plugged cardan shaft for the quick replacement of worm parts without a tool. A worm pump 2L54 for delivery rates of up to 55 l/min and a maximum of 10 mm particle size can be installed S 5 EV/CM * Equipped as the S 5 EV, but with a continuous mixer CM 928/ 040-A01 with a mixing output of 40 l/min and 5.5 kw electric drive. Suitable for dry-mix mortar from the bag or from the silo. Standard equipment: Same as S 5 EV but with control unit for CM mixer and fill-level sensor cpl. 42 V S 5 EV/TM * Equipped as the S 5 EV, but with a pan mixer TM 100 with a mixing volume of 80 l and 2.2 kw electric drive. Suitable for multi component mortar or with effectively longer requested mixing time. Standard equipment: As version S 5 EV but wheel kit with inflatable rubber tyres S 5 EF Worm pump with powerful constant drive for larger quantities of material, particularly suitable for self levelling floor screed. Fitted with vibrating screen and vibrator. Standard equipment: Same as version S 5 EV * Versions are also available with plugged cardan shaft. Special voltage configurations are available on request. Technical data S 5 EV S 5 EV S 5 EV/CM S 5 EV/TM S 5 EF Special feature basic version basic version with continous mixer with pan mixer basic version Worm pump 2L6 2L6 maintenance free 2L6 2L6 2L74 Theor. delivery rate* 7-40 l/min 7-40 l/min 7-40 l/min 7-40 l/min 90 l/min Delivery pressure 25 bar 25 bar 25 bar 25 bar 25 bar Delivery distance** up to 60 m up to 60 m up to 60 m up to 60 m up to 60 m Delivery height** up to 40 m up to 40 m up to 40 m up to 40 m up to 40 m Drive motor 5.5 kw, 400 V / 50 Hz 5.5 kw, 400 V / 50 Hz 5.5 kw, 400 V / 50 Hz 5.5 kw, 400 V / 50 Hz 7.5 kw, 400 V / 50 Hz Drive mixer 5.5 kw 2.2 kw Hopper volume 100 l 100 l 100 l 100 l 130 l Length 2,290 mm 2,290 mm 2,840 mm 2,290 mm 2,610 mm Width 680 mm 680 mm 680 mm 680 mm 680 mm Height 650 mm 650 mm mm mm 650 mm Weight 190 kg 190 kg 360 kg 400 kg 260 kg Discharge connection 6 mm 6 mm 6 mm 6 mm 10 mm Maximum grain size M 35 M 50 M 35 M 35 M Supplementary equipment Part Pan mixer TM Compressor HANDY, 250 l/min, V / 50 Hz 3-phase Compressor V-MEKO 400, 360 l/min, V / 50 Hz 3-phase and Geka coupling Compressor 590 l/min, 10 bar, l air accumulator, 3 kw, 400 V, 50 Hz Pneumatic remote control cpl Silo connection D 245 flexible for CM Chassis F 80, 750 kg, incl. certified inspection Remote control extension cable, 20 m Vibrating screen MW 10, 400 V, 50 Hz Additional part number for pump parts D conversion kit infinitely adjustable 3-19 l/min Additional part number for pump parts 2L88, infinitely adjustable l/min Cleaning connection M35 / GEKA Fill-level sensor 42 V for CM Reducer coupling V 35-V Filter hood with sensor for CM Pressure check gauge DN CM 928 for attachment to S Supply cable with CEE plug, 32 Amp Further information is available in brochure MM For suggested accessories for various applications see pages For additional accessories see page 102 ff. * The delivery rate depends on the rotor/ stator and the pump speed (rpm). Depending on the speed, the delivery rate may be higher or lower. ** The data is based on experience and is dependent on the materials used

38 Suggested accessories for S 5 Suggested accessories for S 5 Accessories for job site mixes Accessories for fine plaster (< 4 mm grain size) Complete Set, : Standard delivery line 40 m long, consisting of: Complete Set, : Standard delivery line 20 m long, consisting of: Part Fig. 1x Pneumatic remote control x Mortar hose ID 35, 13.3 mm x Spray gun ID x Air hose, 20 m x Nozzle ø 16 mm x Seal ID x Sponge rubber ball ID x Geka coupling ¼ Part Fig. 1x Compressor V-Meko with fuse x PM hose holder, made of leather Optional accessories: Part Fig. 1x fine plaster spray gun ID x Seal ID x Reduction ring V 35 - V x Adapter Geka / Ewo x Pneumatic remote control x Mortar hose ID 25, 10 m x Air hose ½, 20 m x Cardan shaft D x D6 Power rotor x D6 Power stator Part Fig. 2x Connecting rod, 325 mm x Sponge rubber ball ID x Strocomp x PM hose holder, made of leather Optional accessories: 1 Accessories for dry mortar (for cement plaster, fire proofing, EIFS) Accessories for anchor filling Complete Set, : Standard delivery line 30 m long, consisting of: Part Fig. 1x Pneumatic remote control x Mortar hose 35, 13.3 m x Mortar hose ID V 35 - V 25-40, 5 m 2x Air hose ½, 15 m x fine plaster spray gun ID x Nozzle ø 12 mm x Nozzle ø 14 mm x Seal ID x Seal ID Part Fig. 5x Sponge rubber ball ID x Sponge rubber ball ID x Geka coupling ¼ x Compressor V-Meko with fuse x PM hose holder, made of leather Optional accessories: Complete Set, : Standard delivery line 20 m long, consisting of: Part Fig. 1x Reduction V 35 / V x Pressure control device 2-32 bar x Mortar hose ID 25-40, 10 m x Seal ID x PM coupling M / RI 1' x Pressure gauge DN Optional accessories:

39 Suggested accessories for S 5 Accessories for concrete renovation Complete Set, : Standard delivery line 40 m long, consisting of: Part Fig. 1x Pneumatic remote control x Mortat hose ID 35, 13.3 m x Refurbishing spray gun x Coupling V x Air hose, 20 m x Seal ID x Sponge rubber ball ID x Nozzle, ø 15 mm x PM hose holder, made of leather Accessories for self levelling floor screed; with S5 EF only! Complete Set, : Standard delivery line 40 m long, consisting of: Part Fig. 3x Delivery hose ID 50, V 50, M m x Sponge rubber ball ID x Sealing ring ID Optional accessories: Optional accessories: In addition, a compressor with an air volume of 1,500 l/min is required. Accessories for spraying GRC (glass fibre reinforced concrete) Complete Set, : Standard delivery line 10 m long, consisting of: Part Fig. 1x Control panel x GRC spray gun x Hose connection cpl x Mortar hose ID 25, V 35 / V 25-40, 10 m x Cardan shaft (spiral) x Rotor D x Stator D x Seal ID x Seal ID x Sponge rubber ball ID x Tie bolt Optional accessories: Modification of the pump type 2L6 of the S 5 to other pump types Conversion from S 5 EV 2L6 to D4, D4½, D4¼, D5 short, D6, D8-2++ with the following parts: Part 1x Cardan shaft (spiral) or Cardan shaft (paddle) x Tie bolt (l=325 mm, M 20) You can find rotors / stators on page 102 ff. Conversion from S 5 EV 2L6 to D5 with the following parts: Part 1x Cardan shaft (spiral) or Cardan shaft (paddle) x D5 Rotor x D5 Stator x Clamp complt x Tie bolt (l=410 mm, M 20) Conversion from S 5 EV 2L6 to 1L6 with the following parts: Part 1x Cardan shaft (spiral) x 1L6 Rotor x 1L6 Stator x Clamp complt x Tie bolt (l=300 mm, M 20) Conversion for existing S5 (: , , ) to Version with plugged cardan shaft and rotor / stator 2L54: Part 1x Cardan shaft x Cardan flange x Drive shaft x Rotor 2L x Stator 2L x Hexagon nut M x Hexagon head bolt M 12 x x Hexagon head bolt M 12 x x Hexagon head bolt M 12 x x Flexible disk x Safety disk x ID 50 pressure connection x PM coupling M 50 / IG 2"

40 Continuous mixer Mortar spraying systems CM The small one for bag material Powerful motor on the continuous mixer CM 528. Practical quick-release device for easy mixing tube removal. Large hopper on the continuous mixer easy to fill due to low position. Technical Data CM V, single phase CM V Drive 2.2 kw / 280 rpm 2.2 kw / 400 V 230 V / 50 Hz / 14 A 3 phases / 10 A Water fittings R 1/2 R 1/2 Water flow press. > 2.5 bar > 2.5 bar Hopper 70 l 70 l Mixing tube 650 mm 650 mm Machine plug shock-proof 16 A, CEE 16 A, 3p blue 5000 L Mixer perf. 25 l/min 25 l/min Length 1,700 mm 1,700 mm Width 700 mm 700 mm Height 1,000 mm 1,000 mm Complete weight 90 kg 95 kg Max. grain size 3 mm 3 mm The compact, lightweight, mobile continuous mixer for mixing ready-mix dry mortar. The CM 528 can process almost all pumpable machine plasters, wall plasters, finishing plasters and even masonry mortar with a maximum grain size of 3 mm and represents a better, more cost-effective alternative to the manual agitator. Standard equipment: Frame with 2 wheels, operating instructions and power supply coupling (230 V single phase) (400 V) CM continuous mixer for bag material Driven by electric motor 2.2 kw, 230 V or 400 V Max. mixing capacity 25 l/min 70 litre sack filling hopper Supplementary equipment CM Part Discharge meter retrofit kit Supply cable, 3 x 2.5 mm 2, with shock proof plug Supply cable, with CEE-plug, 5 x 2.5 mm 2, 16 A Further information is available in brochure MM For additional accessories see page 102 ff

41 Worm pumps Mortar spraying systems Beliso Series SP 11 BMR, SP 11 BBR, SP 11 BUR Easy to use plastering machine for ready-mix and site mixes Powerful worm pump 2L6 with discharge connection to hose connection. The maximum engine speed of just 2,600 rpm and the good sound insulation make the SP 11 a machine that is quieter than average. You can control and programme the complete machine from the control panel. Worm pump SP 11 BMR The sophisticated design and simple operation of the worm pump series SP 11 Beliso are extremely impressive. The machines are suitable for site mixes or bagged interior and external rendering, coloured mortar, limestone mortar, base plaster, light wall mortar, ornamental plaster, liquid screed and for filling and grouting work. SP 11 BMR PLC Fully hydraulic pump and mixer drive Lifting mixer for convenient filling Excellent soundproofing due to sealed engine compartment Low noise emissions Automatic engine speed adjustment Infinitely variable pumping rate Autom. interval electronics prevent excessive mixing Water metering Mixing time adjuster Standard equipment: operating instructions, spare parts list, standard tools and cleaning accessories HPC DE l l l HPC: High-pressure cleaner, DE: Dust extraction SP 11 BBR Features similar to the BMR version, but without PLC and with mechanical water metering and manual speed adjustment. SP 11 BUR Features similar to the BMR version, but with 4-cylinder engine, chassis with brakes, mechanical water metering and manual speed adjustment. HPC DE l l Supplementary equipment Worm pump SP 11 BUR HPC DE l l l Part Working light 12 V Rubber wiper for window mixer blades Reduced price for dust extraction cpl., Radio remote control for SP 11 BMR, SP 11 BUR Vibrating screen compl. MW Vibrating screen compl. MW Cable remote control 20 m Technical data SP 11 BMR SP 11 BBR SP 11 BUR Machine model lifting mixer lifting mixer lifting mixer Pump type 2L6 2L6 2L6 Delivery pressure 25 bar 25 bar 25 bar Theor. delivery rate* 5-40 l/min 5-40 l/min 7-40 l/min Delivery distance** 120 m horizontally 120 m horizontally 120 m horizontally Delivery height** 60 m high 60 m high 60 m high Compressor 2-cylinder-compressor 400 l/min, 7 bar Compulsory-type mixer 150 l 150 l 150 l Hopper 220 l 220 l 220 l Drive motor 3-cylinder Kubota, 18.5 kw*** 4-cylinder Kubota, 22.7 kw at 2,600 rpm at 2,600 rpm Chassis without brakes, road-worthy with brakes, road-worthy Bearing load (tow bar) 60 kg 60 kg 70 kg Weight 750 kg 750 kg 900 kg Length 3,420 mm 3,420 mm 3,924 mm Length without towbar 2,170 mm 2,170 mm - Width 1,420 mm 1,420 mm 1,420 mm Height 1,150 mm 1,150 mm 1,160 mm Filling height 880 mm 880 mm 880 mm Maximum grain size 6 mm 6 mm 6 mm Discharge connection M 50 M 50 M (+ DE + HPC) (+ DE + HPC) (+ DE + HPC) (+ HPC) (+ HPC) * The delivery rate depends on the rotor/ stator and the pump speed (rpm). Depending on the speed, the delivery rate may be higher or lower. ** The data is based on experience and is dependent on the materials used. *** The engine will be changed to the 18.5 kw D 1305 version in the course of The 15.7 kw D 1105 version will continue to be fitted until then. Further information is available in brochure MM For suggested accessories for various applications see pages For additional accessories see page 102 ff

42 Worm pumps Mortar spraying systems Beliso Series SP 11 BMB, SP 11 BMT Easy to use plastering machine for ready-mix and site mixes Powerful worm pump 2L6 with discharge connection to hose connection. The maximum engine speed of just 2,600 rpm and the good sound insulation make the SP 11 a machine that is quieter than average. You can control and identify all machine functions from the central control panel. Worm pump SP 11 BMB The basic versions of the SP 11 Beliso worm pump range have a sophisticated and robust design. The machines are suitable for site mixes or bagged interior and external rendering, coloured mortar, limestone mortar, base plaster, light wall mortar, ornamental plaster, liquid screed and for filling and grouting work. SP 11 BMB Swivel mixer Fully hydraulic pump and mixer drive Excellent soundproofing due to sealed engine compartment Low noise emissions Engine speed adjustment Manual throttle cable Infinitely variable pumping rate Stable plastic hood for easy cleaning, rust-free for its entire service life Mechanical water metering Folding guard bracket Standard equipment: High-pressure hose and spray lance, standard tools, operating instructions, vehicle coupling. HPC DE l l l HPC: High-pressure cleaner, DE: Dust extraction SP 11 BMT Trap mixer Fully hydraulic pump and mixer drive Excellent soundproofing due to sealed engine compartment Low noise emissions Manual engine speed adjustment Manual throttle cable Infinitely variable pumping rate Stable plastic hood for easy cleaning, rust-free for its entire service life Mechanical water metering Standard equipment: identical to SP 11 BMB Supplementary equipment Worm pump SP 11 BMT HPC DE l l l Part Working light 12 V Rubber wiper for window mixer blades Vibrating screen compl. SP 11 BMT, MW Vibrating screen compl. SP 11 SP 11 BMT, MW Technical data SP 11 BMB SP 11 BMT Machine model swivel mixer trap mixer Pump type 2L6 2L6 Delivery pressure 25 bar 25 bar Theor. delivery rate* 5-40 l/min 5-40 l/min Delivery distance** 120 m horizontally 120 m horizontally Delivery height** 60 m high 60 m high Air compressor 2-cylinder compressor 400 l/min, 7 bar Compulsory-type mixer 150 l 150 l Hopper volume 220 l 220 l Drive motor 3-cylinder Kubota, 18.5 kw at 2,600 rpm*** Chassis without brakes, road-worthy Weight 740 kg 730 kg Bearing load (tow bar) 50 kg 50 kg Length 3,510 mm 3,510 mm Length without towbar 3,210 mm 3,210 mm Width 1,420 mm 1,420 mm Height 1,240 mm 1,220 mm Filling height 1,185 mm 1,125 mm Maximum grain size 6 mm 6 mm Discharge connection M 50 M (+ DE + HPC) (+ DE + HPC) (+ HPC) (+ HPC) * The delivery rate depends on the rotor/ stator and the pump speed (rpm). Depending on the speed, the delivery rate may be higher or lower. ** The data is based on experience and is dependent on the materials used. *** The engine will be changed to the 18.5 kw D 1305 version in the course of The 15.7 kw D 1105 version will continue to be fitted until then. Further information is available in brochure MM For suggested accessories for various applications see pages For additional accessories see page 102 ff

43 Suggested accessories for SP 11 Beliso series Suggested accessories for SP 11 Beliso series Accessories for Monocouche (Monocapa) Accessories for site mixes Complete Set, : Standard delivery line 30 m long, consisting of: Complete Set, : Standard delivery line 40 m long, consisting of: Part Fig. 1x Mortar hose ID 35, V 50, M 35, 13.3 m x Mortar hose ID 35, V 35, M 35, 13.3 m x Mortar hose ID 25, V 25, M 24, 5 m x Air hose Geka 1/2"; 40 m x Sponge rubber ball ID x Spray gun ID short x Rubber fine plaster nozzle 8 mm x Rubber fine plaster nozzle 10 mm x Rubber fine plaster nozzle 12 mm Part 1x Rubber fine plaster nozzle 14 mm x Rubber fine plaster nozzle 16 mm x elastic Mortar nozzle D x PM hose holder, made of leather Part Fig. 2x Mortar hose ID 50, V 50, M 50, 13.3 m x Mortar hose ID 35, V 50, M 35, 13.3 m x Air hose Geka 1/2"; 40 m x Seal ID x Sponge rubber ball ID x Seal ID x Sponge rubber ball ID x Base plaster spray gun, short V x PM hose holder, made of leather Part Optional accessories: Accessories for preblended dry mortar Accessories for self levelling floor screed Complete Set, : Standard delivery line 40 m long, consisting of: Complete Set, : Standard delivery line 40 m long, consisting of: Part Fig. 2x Mortar hose ID 50, V 50, M m x Mortar hose ID 35, V 50, M m x Air hose Geka 1/2"; 40 m x Seal ID x Sponge rubber ball ID x Sponge rubber ball ID x Seal ID x Spray gun V x PM hose holder, made of leather Part Optional accessories: Part Fig. 3x Mortar hose ID 50, V 50, M 50, 13.3 m x Seal ID x Sponge rubber ball ID Optional accessories: Accessories for fire protection mortar Accessories for injection and grouting Complete Set, : Standard delivery line 40 m long, consisting of: Complete Set, : Standard delivery line 40 m long, consisting of: Part Fig. 1x Mortar hose ID 35, V 50, M m x Mortar hose ID 35, V 35, M m x Air hose Geka 1/2"; 40 m x Seal ID x Seal ID x Sponge rubber ball ID x Spray gun V x PM hose holder, made of leather Part Optional accessories: Part Fig. 3x Mortar hose ID 50, V 50, M 50, 13.3 m x Seal ID x Sponge rubber ball ID x Air hose Geka 1/2"; 40 m x Injection lance compl. with T-piece, pressure gauge, remote control air valve, coupling w. nozzle pipe ID 50, mounted expanding collar D45 and collar D 38 Part 3x PM hose holder, made of leather Optional accessories: 82 83

44 Piston pumps Mortar spraying systems Piston pump P 13 KA 230 The robust machine with the new pump KA 230 for extremely demanding mixes and all sands up to 10 mm The mechanical vibrator on the large positive mixer prevents the material from bridging and ensures good material flow. The P 13 is driven by a powerful 12.5 kw twin cylinder diesel engine. At 2800 revolutions per minute, it works at a relatively low speed and is extremely robust and low-maintenance. The pressure connections of the new piston pump KA 230 in the P 13 for the hose connection. Technical data P 13 DMR + KA 230 P 13 EMR + KA 230 Piston pump P 13 EMR + KA 230, without brakes The P 13 KA 230 with mechanical pump drive for demanding jobs. The robust double piston pump KA 230 was specially developed to deal with even the most demanding site-made mixes consisting of lime, cement, and all types of sand with a particle size of up to 10 mm. Although it is extremely powerful, it is low-wearing and completely reliable. Above all, this machine is intended for construction sites throughout the world which are subject to the most demanding conditions. It was therefore decided to avoid the use of electronic components. All functions and operating elements of the P 13 are purely mechanical and therefore particularly robust and insusceptible to malfunction. Ideal for: Job-site mixes or exterior and interior plasters in bags, bentonite slurries, special mortars, insulating plasters, cement plaster, lime-cement plaster, lightweight masonry mortar, self levelling floor screed. Suitable for practically all sands with a particle size of up to 10 mm: Crushed sand, dune sand, washed river/sea sand, desert sand and much more Standard accessories: Agitator in hopper, standard spray gun ID 35, box sieve ID 10 mm, T-piece, pressure gauge 100 bar, operating manual, standard tools, with ring hitch or optional ball hitch P 13 DMR KA 230 Piston pump drive, 170 l trap mixer, output is mechanically adjustable over 3 stages P 13 EMR KA 230 Pump drive with electric motor 7.5 kw (11 kw for P 13 SEMR ), 170 l trap mixer, output is mechanically adjustable over 3 stages Pump Mechanical piston pump KA 230 Theor. delivery rate l/min l/min Delivery pressure 40 bar 40 bar Piston stroke 130 mm 130 mm Piston diameter 100 mm 100 mm Delivery distance* up to 300 m horizontally, up to 100 m high Air compressor 2-cylinder compressor, 3.5 bar, 300 l/min Drive motor 2-cylinder-Diesel engine electric motor 400 V 12.5 kw at 2,800 rpm 7.5 kw at 2,900 rpm Chassis without brakes without brakes Fuse 20 A Weight 990 kg 990 kg Length 3,000 mm 3,000 mm Width 1,640 mm 1,640 mm Height 1,450 mm 1,450 mm Filling height 1,300 mm 1,300 mm Maximum grain size 10 mm 10 mm Discharge connection M 50 M Braked version on request on request * The data is based on experience and is dependent on the materials used. P 13 KA 230 specially designed for use with the most demanding site-made mixes powerful 2-cylinder piston pump (1 working pump, 1 balance piston) with new, larger valve head robust and powerful diesel / electric motor output is mechanically adjustable over 3 stages. integrated compressor pneumatic remote control. build-on trap mixer vibrating screen MW 10 mm pressure limiting on outlet Supplementary equipment Part Sound insulation for P 13 DMR Water metering fittings with water meter Ring hitch (truck), with brakes Ring hitch (truck), without brakes Ball hitch with brakes Ball hitch without brakes T-piece ID 50 for connecting a pressure gauge Pressure gauge, cpl bar Further information is available in brochure MM For suggested accessories for various applications see pages 86. For additional accessories see page 110 ff. KA

45 Piston pumps Accessories for floor screed conveyors Suggested accessories for piston pumps P 13 Standard mortar pipe Accessories for floor screed conveyors Delivery hoses Mixokret ID 50 cpl. with couplings Complete Set, : Standard delivery line 40 m long, consisting of: Part Fig. 2x Mortar hose ID 50, V50 / M 50, 13.3 m x Mortar hose ID 50 / 35, 13.3 m x Air hose 40 m, x Seal ID x Seal ID x Sponge rubber ball ID x Sponge rubber ball ID x PM hose holder, made of leather Optional accessories: 6 Fig. 40 bar, 50 x 9 mm, length 13.3 m bar, 50 x 9 mm, length 20 m bar, 50 x 8 mm, length 10 m bar, 50 x 8 mm, length 20 m bar, 50 x 9 mm, length 13.3 m (white) bar, 50 x 9 mm, length 20 m (white) Accessories for Injecting Complete Set, : Standard delivery line 40 m long, consisting of: Part Fig. 5x Seal ID x Sponge rubber ball ID x Mortar hose ID 50, V50 / M 50, 13.3 m x Air hose 40 m, x Injection lance cpl. mit T-piece, pressure gauge, remote control air valve, coupling w. nozzle pipe ID 50, mounted expanding collar D45 and collar D 38 1x PM hose holder, made of leather Delivery hoses Mixokret ID 65, KK 70, cpl. with couplings Individual items for retrofitting* Coupling V 50 / S Coupling M 50 / S ID 50, hose, 40 bar, yard ware, 50 x 9 mm ID 50, hose, 40 bar, yard ware, 50 x 9 mm (white) ID 50, hose, 10 bar, yard ware, 50 x 8 mm x hose clip D 68 B 250 E Sealing ring for coupling * Does not correspond to original/only for repair Optional accessories: 7 For attaching hoses Fig. 10 bar, 65 x 10 mm, length 10 m bar, 65 x 10 mm, length 20 m bar, 65 x 10 mm, length 10 m (white) Individual items for retrofitting* Coupling KKV 70 / S Coupling KKM 70 / S ID 65, hose, 10 bar, yard ware, 65 x 10 mm ID 65, hose, 10 bar, yard ware, 65 x 10 mm (white) x hose clip D 88, 9 B * Sealing ring for coupling * Does not correspond to original/only for repair PM hose holder made of leather

46 Accessories for floor screed conveyors Delivery hoses Mixokret ID 65, KK 89, cpl. with couplings Putzmeister couplings for Mixokret hoses with ID 50, ID 65 and ID 70 mm 1 Couplings ID Fig. KKM 70 / RI Delivery hoses Mixokret ID 90, KK 89, cpl. with couplings 7 Delivery hoses Mixokret ID 90, KK 108, cpl. with couplings Fig. 10 bar, 65 x 10 mm, length 10 m bar, 65 x 10 mm, length 20 m Individual items for retrofitting (integrated externally) only!* Coupling KKV 89 / HR Coupling KKM 89 / HR Hose, 10 bar, yard ware, 65 x 10 mm x washer A x round head screw M8 x x hexagon nut M x washer Sealing ring for coupling Fig. 10 bar, 90 x 10 mm, length 10 m Individual items for retrofitting * Coupling KKV 89 / 90 S Coupling KKM 89 / 90 S Hose, 10 bar, 90 x 11.5 mm, 10 m x hose clip D B Sealing ring for coupling a 1a 3a 4a 5a 6a 7a 3 5 4a 2a 2b 4b Universal joint couplings for Mixokret hoses with ID mm 2b 4b 6b 1b 3b 5b 7b M 65 / S 65 2a V 65 / S 65 2b M 65 / RI V 65 / RI M 50 / S 50 4a V 50 / S 50 4b M 50 RI Couplings ID Fig. KKM 70 HR 50 1a KKV 70 HR 50 1b KKM 70 / 60 S 2a KKV 70 / 60 S 2b KKM 70 / 65 S 3a H KKV 70 / 65 S 3b KKM 89 HR 65 4a KKV 89 HR 65 4b KKM 89 / 90 S 5a KKV 89 / 90 S 5b KKM 70-R a KKV 70-R b KKM 89-R a KKV 89-R b a 8b KKM 89-R 3 8a KKV 89-R 3 8b Fig. 10 bar, 90 x 11 mm, length 10 m Individual items for retrofitting* Coupling KKV Coupling KKM Hose, 10 bar, 90 x 11.5 mm, 10 m, without coupling x hose clip D 127 B 19 1tlg Sealing ring for coupling O-Ring 124 x 18, NBR * Does not correspond to original/only for repair a 9 10b KKM 70 / V50 reduction coupling KKV 89, NW 65 mm 10a KKM 89, NW 65 mm 10b KKV 108, 90 S KKM 108, 90 S M = female part V = male part S = nozzle pipe HR = integrated externally

47 Accessories for floor screed conveyors Wear plates for Mixokret M x Wear plate I x Wear plate II Set of screws and bolts for wear plates: 10x Countersunk screw x Cap nut x Seal ring Wear plates for Mixokret M 700, M 710, M 740 and M 760 Set wear plates M 730, cpl. with countersunk screws, cap nuts amd seal rings: 1x Set wear plates Quantity Description Fig. per vessel Standard wear plates: 1x With hole x Front / rear x On top, crosswise Highly wear resistant plates: 1x With hole (6 mm) x Front / rear (6 mm) x On top, crosswise (6 mm) Wear plates for Mixokret M Mixing paddles for Mixokret Fig. 3x Wear plate with hand-hole x Wear plate x Rubber seal x Cap Nut, M Plastic wear plates 1x With hole x Front / rear x On top, crosswise Fig. Mixing paddle, front Mixer plate, front, for Mixokret M Bolt set for standard wear plate: 10x Countersunk screw x Cap nut x Seal ring Bolt set for highly wear resistant plates: 10x Countersunk screw x Cap nut x Seal ring Bolt set for plastic wear plates: 10x Countersunk screw x Cap nut x Seal ring Steel plate for dished boiler ends (4 mm) 2x Front wear plate I x Front wear plate II a 5b 2 3 4b 5a Mixing paddle, middle, 2 pieces Mixer plate, middle, 2 pieces for Mixokret M Mixing paddle, rear Mixer plate, rear, for Mixokret M M 760, M 740, M 730, M 710, M 700: Mixing paddle holder, 2 pieces, rear 4a Mixing paddle holder, 2 pieces, front 4b M 500: Mixing paddle holder, 3 pieces, inner 5a Mixing paddle holder, 2 pieces, outer 5b Set wear plates M 700, M 710, M 740, M 760, cpl. with countersunk screws, cap nuts amd seal rings: 1x Set standard wear plates x Set highly wear resistant plates x Set plastic wear plates Mixer blade kit for Mixokret M uand M 700 cpl. in plastic bucket with attachment screws Mixer blade kit for Mixokret M item in plastic bucket complete 90 91

48 Accessories for floor screed conveyors Discharge stands Fig. Discharge stand, tripod Steel, ID Steel, KK Steel, KK Aluminium, ID Aluminium, KK Aluminium, KK Fig. Discharge stand, skid Steel, ID Steel, KK Steel,KK Wear and spare parts for discharge stands (V) Fig. Discharge stand, tripod incl. adapter KK 70 KK 89, detachable legs Discharge stand, KKM 108, Adapter discharge stand ID Adapter discharge stand KK Adapter discharge stand KK Retainer for Adapter discharge stand TPU rubber pot, natural, for discharge stand Rubber foot Aluminium, ID Aluminium, KK Aluminium, KK

49 Accessories for floor screed conveyors Vessel testing device Floor screed smoothing machine EB 600L With silencer With 230 V, 50 Hz electric gear motor kw, 120 kpm, smoothing disc dia. 600 mm, height-adjustable guide frame, cpl. with CEE standard coupling 16 A, gross weight 42 kg Injection branch Floor screed sleekingplate ID ID D 600, light, for nivelling machine EB 600 L H Connecting site cable to power supply For attaching hoses Extension cable 16 Amp., 230 V x 2.5 mm 2, 20 m Extension cable with CEE-plug, 16 Amp., 10 m, 5 x 2.5 mm 2 Extension cable with CEE-plug, 16 Amp., 25 m, 5 x 2.5 mm 2 Extension cable with CEE-plug, 32 Amp., 50 m, 5 x 2.5 mm 2 Extension cable with CEE-plug, 32 Amp., 25 m, 5 x 4 mm 2 Extension cable with CEE-plug, 32 Amp., 50 m, 5 x 4 mm 2 Frequency measuring device PM hose holder made of leather For checking the belt tension on the V/ ribbed/ toothed belt 94 95

50 Accessories for fine concrete pumps Accessories for fine concrete pumps T-delivery pipes and reduction pieces Delivery pipes 4 1 Fig. Delivery pipe SK 50, 3'', 1000 mm Delivery pipe SK 50, 3'', 2000 mm Delivery pipe SK 50, 3'', 3000 mm Delivery pipe SK 65, 3'', 1000 mm Delivery pipe SK 65, 3'', 2000 mm Delivery pipe SK 65, 3'', 3000 mm Delivery pipe SK 100, 4.5'', 1000 mm Delivery pipe SK 100, 4.5'', 2000 mm Delivery pipe SK 100, 4.5'', 3000 mm Delivery pipe SK 100, 4.5'', 6000 mm Delivery pipe SK 125, 5.5'', 1000 mm Delivery pipe SK 125, 5.5'', 2000 mm Delivery pipe SK 125, 5.5'', 3000mm Delivery pipe SK 125, 5.5'', 4000 mm Delivery pipe SK 125, 5.5'', 6000 mm Pressure gauge Fig. T-delivery pipe SK 100, 4.5'', 1000 mm T-delivery pipe SK 125, 5.5'', 1000 mm Reduction pipe SK 65, 3''- SK 50, 3'', 1000 mm Reduction pipe SK 100, 4.5''- SK 50, 3'', 1000 mm Reduction pipe SK 100, 4.5''- SK 50, 3'', 1500 mm Reduction pipe SK 125, 5.5''- SK 100, 4.5'', 1000 mm Transmission piece SK 3''/ 2'' IG Transmission piece SK 3''/ 2'' AG Lid for T-delivery pipe 4.5'' Lid for T-delivery pipe 5.5'' Elbow pipes 1 2 Fig. Elbow pipe SK 50, 3'', Elbow pipe SK 50, 3'', Elbow pipe SK 65, 3'', Elbow pipe SK 65, 3'', Elbow pipe SK 100, 4.5'', Elbow pipe SK 100, 4.5'', Elbow pipe SK 100, 4.5'', Elbow pipe SK 100, 4.5'', Elbow pipe SK 125, 5.5'', Elbow pipe SK 125, 5.5'', Elbow pipe SK 125, 5.5'', Elbow pipe SK 125, 5.5'', Clamp coupling 1 Pressure gauge SK 4.5'', 100 bar Pressure gauge SK 5.5'', 100 bar Fig. Clamp coupling SK 3'' Clamp coupling SK 4.5'' Clamp coupling SK 5.5'' Spring cotter 3 Spring cotter

51 Accessories for fine concrete pumps Delivery hoses Concrete spray nozzles Plastic concrete spray nozzles ID V 50 mm, air tap, 1 tap accessory, 30 mm nozzle diameter, Weight: 3,5 kg 2 For cleaning delivery hoses 1 3 Fig. Delivery hose SK 50, 3'', 2,000 mm Delivery hose SK 50, 3'', 4,000 mm Delivery hose SK 50, 3'', 5,000 mm Delivery hose SK 50, 3'', 10,000 mm Delivery hose DN 65, 3'', 5,000 mm Delivery hose SK 100, 4.5'', 3,000 mm Delivery hose SK 100, 4.5'', 4,000 mm Delivery hose SK 100, 4.5'', 5,000 mm Delivery hose SK 100, 4.5'', 6,000 mm Delivery hose SK 125, 5.5'', 2,000 mm Delivery hose SK 125, 5.5'', 3,000 mm Delivery hose SK 125, 5.5'', 4,000 mm Delivery hose SK 125, 5.5'', 5,000 mm Delivery hose SK 125, 5.5'', 6,000 mm Fig. Sponge rubber ball D 60, hard Sponge rubber ball D 70, hard Sponge rubber ball D 80, hard Sponge rubber ball D Sponge rubber ball D 150, hard Sponge rubber ball D 150, medium Catch basket for Sponge rubber ball, 4.5'' Catch basket for Sponge rubber ball, 5.5'' Wash-out adaptor SK 4.5'', for cleaning with compressed air Wash-out adaptor SK 5.5'', for cleaning with compressed air End hose SK 50, 3'', 6,000mm End hose SK 65, 3'', 5,000 mm End hose SK 100, 4.5'', 2,850 mm End hose SK 125, 5.5'', 3,000 mm Support holder for end hose SK 100, 4.5'' Support holder for end hose SK 125, 5.5'' Rubber seals additional accessories Rubber seal DN 65, DN 50, 3'' Rubber seal DN 100, 4.5'' Rubber seal DN 125, 5.5'' Fig. Pipe clamp for wall or floor, DN Pipe clamp for wall or floor, DN Air hose 3/4'', 20 m PM hose caddy PM pump aid, 18 l storage tank, 25 pcs

52 Accessories for fine concrete pumps Accessories for fine concrete pumps Flat gate valves GVM GVM (gate valve manual) Flat gate valves are simple gate valves. They are opened and closed manually, i.e. using a hammer. They are available for low pressure requirements of up to 20 bar and for high pressure requirements of up to 130 bar Manual gate valve GVM 2/2, 130 bar, SK 125, 5.5'' Manual gate valve GVM 2/2, 130 bar, SK 100, 4.5'' Rotary distributors Rotary distributors are ideal for the simple and flexible delivery and distribution of fine concrete at construction sites. There are 3 different rotary distributor sizes to meet different site conditions. RV 0 The RV 0 is the smallest rotary distributor in the range. It is particularly suited to cramped construction sites. It consists of a stable hinge to which hoses can be connected if necessary RV 10 in transport position RV 10 The RV 10 is a flexible rotary distributor which is ideal for large areas and roofs. Large areas of up to 320 m 2 can be concreted from a single position RV 7 Technical Data: The RV 7 is suitable for smaller construction sites on roofs or for the concreting of pillars. The RV 7 is stabilised by 6 individual weights which can be removed when it is transported Type Pipe delivery line Arms Reach Concreting Transp. dimensions Weight Pipe - DN (m) area (m 2 ) L x W x H (m) (kg) RV ,8 x 0,5 ø RV x 0.6 x 0, RV x 1.03 x Accessories RV 10 (V) Underlay plate, 1 Set, 4 Pieces

53 Diameter Accessories for plastering machines Accessories for plastering machines PM Mixer pumps rotors / stators Bore (B) = Groove (G) = Rule of thumb: The finer the particle size and the softer the material to be pumped, the harder the required rubber quality for the stator. The grainier the material and the harder the aggregate, the softer the required rubber quality. Pitch s (mm) d 1 d 2 Stator length l 1 (mm) Rotor length l 2 (mm) D 4 1/2 D 4 1/4 D 5 short D 6-2 Mixer pumps MP 22, MP 25 MIXIT Model Output l/min at 100 rpm** Colour Hard- Max. Pump Length / ø Length Rotor Version Stator Rotor Clamping jacket Rotor for Uni-Mixer (l/ min) (75 % sphere) ness grain size pressure stator (mm) without pin (mm) Rotorhead D4 1/ white / Groove maintenance-free D4 1/ black / Groove D4 1/ green / Groove maintenance-free D4 1/ black / Groove D red / Groove D yellow / Groove D5 kurz brown / Groove D6 Twin white / Groove maintenance-free D6 Power red / Groove maintenance-free D6 CP silver / Groove maintenance-free D orange / Groove maintenance-free D blue / Groove D6-3 action orange / Groove maintenance-free D red / Groove maintenance-free D black / Groove maintenance-free Mixer pumps MP 25 FMP 60 Model Output l/min at 100 rpm** Colour Hard- Max. Pump Length / ø Length Rotor Version Stator Rotor Clamping jacket (75 % sphere) ness grain size pressure stator (mm) without pin (mm) Rotorhead (l/ min) ( Shore) (mm) (bar) R black / Groove maintenance-free Mixer pumps MP V Model Output l/min at 100 rpm** Colour Hard- Max. Pump Length / ø Length Rotor Version Stator Rotor Clamping jacket (l/ min) (75 % sphere) ness grain size pressure stator (mm) without pin (mm) Rotorhead ( Shore) (mm) (bar) D ,5 red / Groove maintenance-free *needs conversion = standard equipment **depending on material, consistence, delivery range and pressure Assembly aid for rotor-stator Silicone spray, 400 ml spray can

54 Accessories for plastering machines N13 S D 6 CP D 6 Power D 6-3 D 6-3 Action D 6 Twin D 6-3 blue Mixer pumps MP 10, MP 12 Model Output l/min at 100 rpm** Colour Hard- Max. Pump Length / ø Length Rotor Version Stator Rotor Clamping jacket (l/min) (75 % sphere) ness grain size pressure stator (mm) without pin (mm) Rotorhead ( Shore) (mm) (bar) N13 S 16 3,8 grey / Groove = standard equipment Worm pump Sprayboy P 12 Model Output l/min at 100 rpm** Colour Hard- Max. Pump Length / ø Length Rotor Version Stator Rotor Clamping jacket (l/min) (75 % sphere) ness grain size ( Shore) (mm) pressure (bar) stator (mm) without pin (mm) Rotorhead D4 1/ white / Groove maintenance-free D4 1/ black / Groove D4 1/ green / Groove maintenance-free D4 1/ black / Groove D rod / Groove D yellow / Groove D5 kurz brown / Groove Worm pump Sprayboy P V Model Output l/min at 100 rpm** Colour Hard- Max. Pump Length / ø Length Rotor Version Stator Rotor Clamping jacket (l/min) (75 % sphere) ness grain size pressure stator (mm) without pin (mm) Rotorhead ( Shore) (mm) (bar) D red / Groove D yellow / Groove Worm pump S 5 Model Output l/min at 100 rpm** Colour Hard- Max. Pump Length / ø Length Rotor Version Stator Rotor Clamping jacket (l/min) (75 % sphere) ness grain size pressure stator (mm) without pin (mm) Rotorhead ( Shore) (mm) (bar) 2L yellow / Groove / Bore D6 Power* red / Groove maintenance-free D8-2* black / Groove maintenance-free 2L yellow / Bore L yellow / Bore maintenance-free 2L blue / Bore integrated 2L brown / Bore L88* brown / Groove L88* brown / Bore L54* grey / Groove integrated *needs conversion (no conversion for S5 EV with Part No necessary) **depending on material, consistence, delivery range and pressure

55 Accessories for plastering machines D 6 Power D 4 yellow D 4 red D 8-2 2L88 2L6 2L6 maintenance free Clamping jacket Worm pump SP 5 Model Output l/min at 100 rpm** Colour Hard- Max. Pump Length / ø Length Rotor Version Stator Rotor Clamping jacket (l/min) (75 % sphere) ness grain size pressure stator (mm) without pin (mm) Rotorhead ( Shore) (mm) (bar) 1L yellow / Groove = standard equipment BMR, BMB, BMT, BBR Worm pumps SP 11 Model Output l/min at 100 rpm** Colour Hard- Max. Pump Length / ø Length Rotor Version Stator Rotor Clamping jacket (l/min) (75 % sphere) ness grain size pressure stator (mm) without pin (mm) Rotorhead ( Shore) (mm) (bar) 2L yellow / Groove L yellow / Groove integrated 2L yellow / Groove maintenance-free 2L brown / Groove L green / Groove integrated 2L yellow / Groove / Bore Worm pumps SP 11 BHF Model Output l/min at 100 rpm** Colour Hard- Max. Pump Length / ø Length Rotor Version Stator Rotor Clamping jacket (l/min) (75 % sphere) ness grain size pressure stator (mm) without pin (mm) Rotorhead ( Shore) (mm) (bar) 2L54* grey / Groove integrated 2L54* silver / Groove integrated 2L blue / Bore maintenance-free 2L74* blue / Groove integrated 2L75* grey / Groove integrated 2L grey / Bore maintenance-free Worm pumps SP 11 BUR Model Output l/min at 100 rpm** Colour Hard- Max. Pump Length / ø Length Rotor Version Stator Rotor Clamping jacket (l/min) (75 % sphere) ness grain size pressure stator (mm) without pin (mm) Rotorhead ( Shore) (mm) (bar) 2L yellow / Groove L yellow / Groove integrated 2L yellow / Groove maintenance-free 2L brown / Groove ,5L green / Groove integrated 2L grey / Groove integrated 2L silver / Groove integrated 2L blue / Groove integrated 2L grey / Groove maintenance-free *needs conversion **depending on material, consistence, delivery range and pressure

56 Accessories for plastering machines 2L74 3L7 2L54 2L75 2L8 2L88 Worm pumps SP 20 Model Output l/min at 100 rpm** Colour Hard- Max. Pump Length / ø Length Rotor Version Stator Rotor Clamping jacket (l/min) (75 % sphere) ness grain size pressure stator (mm) without pin (mm) Rotorhead ( Shore) (mm) (bar) = standard equipment white / Hexagonal maintenance-free 2L white / Hexagonal H H maintenance-free Other worm pumps Model Usage l/ min at 100 rpm** Colour Hard- Max. Pump Length/ ø Length Rotor Version Stator Rotor Clamping jacket in machine (75 % sphere) ness grain size pressure stator (mm) without pin (mm) Rotorhead ( Shore) (mm) (bar) 2L4 P4 5.3 yellow / Groove L4 P4 5.3 red / Groove L4 P4 5.3 green / Groove D3 TS red / Groove D3 TS green / Groove D5 * MS-x, S brown / Groove L7 SP 11 BUR 17.0 yellow / Groove maintenance-free 3L7 SP 11 BUR 17.0 yellow / Groove maintenance-free 3D7 UMP 17.0 red / Groove maintenance-free 2L6 FMP 17.0 yellow / Groove L88 FUMP brown / Groove L88 UMP 21.0 brown / Bore L74 P11SDVF 63.0 blue / Bore maintenance-free 2D8 FUMP, SP 11 E 45.9 red / Groove maintenance-free 1,5L8 S8 123 yellow / Bore *needs conversion **depending on material, consistence, delivery range and pressure

57 Accessories for plastering machines In-line Mixer Mortar hoses up to 40 bar operating pressures (yard wear) 1 2 Dynamat in-line mixer with mortar hose m, ø 35 mm, connection cable 2 m for Mixer pump (Fig. 1) Uni in-line mixer (Fig. 2) (Accessories: see rotors with pins) Cross shaped mixing paddle (for uni in-line mixer) x collar nuts PM-coupling V 35 / reduced Pressure gauge 0-60 bar for hoses DN Pressure gauge 0-60 bar for hoses DN ID 25 mm, yard ware 25 x 7 mm, as of 40 m roll ID 25 mm, yard ware 25 x 7 mm, as of 40 m roll (white) ID 35 mm, yard ware 35 x 8 mm, as of 40 m roll ID 35 mm, yard ware 35 x 8 mm, as of 40 m roll (white) ID 50 mm, yard ware 50 x 9 mm, as of 40 m roll ID 50 mm, yard ware 50 x 9 mm, as of 40 m roll (white) Pressure gauge, pressure control device, T-piece Mortar hoses cpl. with couplings, ID 20, V Geka Pressure gauge for ID 50 with coupling V 50 / grease buffer, 0-6 bar with coupling V 50 / grease buffer, 0-10 bar with coupling V 50 / grease buffer, 0-25 bar with coupling V 50 / grease buffer, 0-40 bar, ø 60 mm with coupling V 50 / grease buffer, bar T-piece to pressure gauge ID 50 mm bar, 20 x 7 mm, length 10 m Mortar hoses cpl. with couplings, ID 25, 40 bar, M 25-40, V Pressure control device and pressure gauge Pressure control device cpl. with grease buffer 2-32 bar Protective cap for pressure gauge NG Air-testing pressure gauge 1, T-piece 0-6 bar Testing pressure gauge with 1 hose tap ID Testing pressure gauge with 1 hose tap ID Pressure gauge 0-60 bar for hoses DN Pressure gauge 0-60 bar for hoses DN For attaching hoses PM hose holder made of leather Fig. 40 bar, 25 x 7 mm, length 5 m bar, 25 x 7 mm, length 10 m bar, 25 x 7 mm, length 15 m bar, 25 x 7 mm, length 20 m bar, 25 x 7 mm, length 20 m (white) Individual items for retrofitting* Coupling V / S Coupling M / S ID 25 yard ware 25 x 7 mm x hose clamp, NW 25, B 200 E Seal for coupling * Does not correspond to original/only for repair M = female part V = male part S = nozzle pipe

58 Accessories for plastering machines Mortar hoses complete with couplings, ID 25, 40 bar, V 35, V Mortar hoses complete with couplings, ID 35, 40 bar, M 35, V 50 5 Fig. 40 bar, 25 x 7 mm, length 5 m bar, 25 x 7 mm, length 10 m Individual items for retrofitting* Coupling V (a) V / S 25 2a Coupling V (b) V 35 / S 25 2b ID 25 yard ware 25 x 7 mm x Hose clamp ID 35, D 250 e Fig. 40 bar, 35 x 8 mm, length 13.3 m Individual items for retrofitting* Coupling M 50 / S Coupling V 50 / S ID 35, 35 x 8 mm, yard ware x Hose clamp ID 35 B 250 e Sealing for coupling * Does not correspond to original/only for repair * Does not correspond to original/only for repair Mortar hoses complete with couplings, ID 35, 40 bar, M 35, V 35 Mortar hoses complete with couplings, ID 50, 40 bar, M 50, V 50, 6 Fig. 40 bar, 35 x 8 mm, length 2 m bar, 35 x 8 mm, length 13.3 m bar, 35 x 8 mm, length 20 m bar, 35 x 8 mm, length 13.3 m (white) Fig. 40 bar, 50 x 9 mm, length 13.3 m bar, 50 x 9 mm, length 20 m bar, 50 x 9 mm, length 13.3 m (white) bar, 50 x 9 mm, length 20 m (white) Individual items for retrofitting* Coupling M 35 / S Coupling V 35 / S ID 35, 35 x 8 mm, yard ware x Hose clamp ID 35 B 250 e Sealing for coupling Individual items for retrofitting* Coupling M 50 / S Coupling V 50 / S ID 50, 50 x 9 mm, yard ware x Hose clamp ID 50 B 250 e Sealing for coupling * Does not correspond to original/only for repair * Does not correspond to original/only for repair M = female part V = male part S = nozzle pipe

59 Accessories for plastering machines Putzmeister couplings for mortar hoses with mm ID Hose nozzles with thread for mortar hoses with mm ID 1 Fig. M / RI M 35 / RI M 35 / RI M 50 / RI M 35 / RA M 50 / RA Sealing rings S-nozzle pipe 20 mm RA S-nozzle pipe 25 mm RA S-nozzle pipe 35 mm RA S-nozzle pipe 50 mm RA V / RI V / RI V 35 / RI V 35 / RI 1 plastic V 35 / RI V 35 / RI V 35 / RI V 50 / RI V 50 / RI V 50 / RI M / S M 35 / S M 50 / S V / S V 35 / S V 35 / S Hose clips ID mm, 42 x 27 x 6 mm ID 35 mm, 54 x 37 x 6 mm ID 50 mm, 67 x 51 x 6 mm ID 1 2 mm, for air hose B17 Oe ID 25 mm, for mortar hose B20 Oe ID 35 mm, for mortar hose B25 Oe ID 50 mm, for mortar hose B25 Oe ID 65 mm, 2-pieces, for mortar hose B ID 65 mm, 1-piece, for mortar hose ID 90 mm, for mortar hose ID 98 mm, for suction hose V 50 / S V 50 / S V 35-V 25 / 40 reduced M 25 / 40-V V 50 - M 35 reduced M 50 - V 35 reduced V 50 Dummy lid Cam levers Cam lever, reinforced, forged steel Heavy duty shaft dowel pins with reinforcement: (10 each in a set) for 35 and 25 M-Teil, Gr. 6 / 30 and 3.5 / for 50 M-part, size 6 / 40 and 3.5 / Shaft dowel pin for 25 and 35 6 x Shaft dowel pin for x Shaft dowel pin for 50 6 x Safety ring for cam lever M = female part V = male part S = nozzle pipe Rotary feedthrough M / RI 1 aluminium coupling cpl

60 Accessories for plastering machines Water air-hose 3 4 Hose connectors for mortar hose wih air hose Water air-hose, GEKA-coupling 3 4 ID, length 40 m Spray nozzle, GEKA-coupling 1 2 ID, lockable ø 25 mm hose with ø 13 mm hose, plastic clamp black (Illustrations may differ from the original) Hose clamps for air hoses Air hose 1 2 EWO coupling Coupling Length GEKA 1 2 ID 10 m GEKA 1 2 ID 15 m GEKA 1 2 ID 20 m GEKA 1 2 ID 30 m GEKA 1 2 ID 40 m RA Sponge rubber balls Width Hose external 8 mm ø mm mm ø mm mm ø mm for cleaning the delivery hoses for delivery hose ID 18 mm, ø 20 mm for delivery hose ID 20 mm, ø 25 mm for delivery hose ID 25 mm, ø 30 mm for delivery hose ID 35 mm, ø 45 mm for delivery hose ID 50 mm, ø 60 mm GEKA quick-couplings for water- and air hoses ID Ground plaster spray guns made of aluminium for wet mortar, job site mixes S = nozzle pipe RA = external thread RI = internal thread Hose clip Seal, GEKA plus Seal S S S S RA RA RA RA RA RI RI RI RI RI Up to grain size of 8 mm, it can be used for first spray and base coat plasters as well as for rough cast and insu lating plasters, mainly suitable for construction site mixes but also for ready-mixed material. Max. throughput up to 40 l/ min, air requirement approx l/ min. All 3 spray guns with male coupling 35 mm and 2 air ball valves. 1 Version Nozzles ø Weight Fig. short, 185 mm, straight K 20, 16 mm 1.4 kg short, 700 mm, angular K 20 mm 1.5 kg long, 1,300 mm, angular K 20 mm 1.7 kg Width Hose external 8.1 mm ø 6-16 mm mm ø mm mm ø mm mm ø mm mm ø 57 mm mm ø mm Collar nozzles ø 18 mm mm

61 Accessories for plastering machines Fine plaster spray gun made of plastic for ready-mix mortar Spray guns for texture plaster Up to grain size 4 mm for all dry ready- mix motar that have to be prepared, e.g. gypsum plaster, lime-cement plas ters, etc. Max. throughput 30 l/min, air requirement approx. 200 l/min. 2 3 Up to a grain size of approx. 4-6 mm for mineral spray or dispersion plasters as well as for sealing slurries, fillers, etc. Throughput up to 10 l/ min, air requirement l/ min. 4 ID Nozzles ø Weight M 25 mm 4, 6, 8 mm 2.2 kg M mm 4, 6, 8 mm 2.2 kg Spray nozzles for texture plaster spray gun ID Ball valve Air cock Version Nozzle ø Weight Fig. M mm yes 2 short 14 mm 2.4 kg with rotating coupling 300 mm M mm 1 short 14 mm 1.2 kg with rotating coupling 405 mm MP 25 Standard M mm 1 long, 14 mm 2.6 kg with rotating coupling mm M mm 1 long, 14 mm 1.2 kg with rotating coupling 770 mm and angled aluminum head M mm 1 long, 14 mm 1.5 kg with rotating coupling mm and angled aluminum head V 35 mm 1 short, 14 mm 0.6 kg mm V 35 mm yes 1 short, 14 mm 0.65 kg mm ø 4 mm mm mm mm mm Material nozzles for texture plaster spray gun ø Diameter/ Version 12 mm Air bore holes ø 3 mm red mm Air bore holes ø 2 mm silver Conical plaster nozzles ø 10 mm mm mm mm Spray guns for fine plaster with swivel coupling Spray gun w. swivel coupling ID 25-40, with 6.5 mm nozzle Rubber fine plaster nozzles Quality-PE Quality-PU ø 8 mm mm mm mm mm Spray nozzles ø 6.5 mm (for 1.5 mm grain size) mm (for 2 mm grain size) mm (for 3 mm grain size) mm (for 4 mm grain size) mm (for 5 mm grain size) mm (for 6 mm grain size)

62 Accessories for plastering machines Refurbishing spray gun Guns for bonding material Concrete spray nozzles, plastic Up to grain size of 6 mm for mineral-based plasters for refurbishing, for concreting with ring nozzle and flexible spray pipe. ID 1, ø 12 mm nozzle, weight 1.2 kg ID V 35/ RI1, coupling connection plastic ID M 25-40/ RI1, coupling connection Nozzles Vulkollan ø 15 mm ID Fig. DN 10 Jointing device with tangential sprayhead jointing nozzle, swivel coupling M DN 25 Frame filling unit with ball valve, rotating coupling M 25-40, 20 m el. remote control cable, (for MP, SP 5 + Sprayboy) Remote control cable with plug with binder plug and switch, 20 m long DN 25 Frame connector filling hose with coupling M 25-40, 30 cm long Electric remote control with on-off switch (binder plug), 60 m Electric remote control cable with plug (binder) for extension 30 m Electric remote control cable with plug (binder) for extension 20 m, 3 x 0,75 Electric remote control cable with plug (binder) for extension 10 m, 3 x 0,75 ID Air cock Cock-addit Nozzles ø Weight V 35 mm mm 3.0 kg V 50 mm mm 3.5 kg Adhesive gun with case 1 Bonding gun in case consisting of: bonding gun, cpl, tool case, cleaning brush D, grease gun small, adapter cable 4P harting/ binder 2 Plus: 30 m remote control cable , 20 m remote control cable or 10 m remote control cable Applying nozzles RI1 / GEKA Mortar applying nozzle 160 mm Power cable / construction site lead Extension cable 16 Amp., 230 V x 2.5 mm 2, 20 m Construction site lead with CEE plug Amp., 10 m, 5 x 2.5 mm 2 Construction site lead with CEE plug Amp., 25 m, 5 x 2.5 mm 2 Construction site lead with CEE plug Amp., 50 m, 5 x 2.5 mm 2 Construction site lead with CEE plug Amp., 25 m, 5 x 4 mm 2 Construction site lead with CEE plug Amp., 50 m, 5 x 4 mm

63 Accessories for plastering machines Injection lances Injection lance cpl. with T-piece, pressure gauge Remote control air cock, coupling with nozzle pipe ID 50, Expanding collar D 45 and mounted collar D 38 Injection lance as above but without T-piece, Pressure gauge and remote control cock, conn. V 35 / RI 1 hopper guns with accessories Compressor 1 Expanding collar D Expanding collar D Fig. Compressor, 200 l/min, 400 V / 50 Hz without cut-off (MP serie) Compressor, 200 l/min, 400 V / 50 Hz with cut-off Compressor, 200 l/min, 230 V / 50 Hz with cut-off Wear parts Hopper gun cpl. with air hose in box Hopper gun without hose and packaging Air hose with EWO plug coupling, 10 m Air hose with EWO plug nipple/ GEKA coupling Holder for hopper gun Corner piece Fig. Compressor Strocomp 433, AC, V / 50 Hz, l/min suction, 300 l/min delivery, 2 x 5l tank content, 10 bar, 2.2 kw, 81 x 47 x 52 cm, 67 kg Compressor Strocomp 864, AC, V / 50 Hz, l/min suction, 550 l/mindelivery 2 x 5l tank content, 10 bar, 2 x 2.2 kw, 75 x 55 x 61 cm, 71 kg Fig. Compressor HANDY, 250 l/ min, 400 V/ 50 Hz, 3-phased Compressor HANDY, 250 l/ min, 230 V/ 50 Hz, 1-phased Wear parts kit consisting of: Pressure spring (2 pieces) Hose clamp (1 piece) O-ring ø 42 mm (2 pieces) O-ring ø 19 mm (2 pieces) Diaphragm (2 pieces) Guiding nozzle (1 piece) Air nozzle D 3.2 (1 piece) Knurled nut M5 (2 pieces) Water pressure booster pump 4 5 Fig. Coupling 1 4 GEKA (*) (*) is required if compressor is not used in connection with mixer pump. Compressor V-MEKO 400, 360 l/min, V / 50 Hz with pressure switch-off Compressor V-MEKO 400, 360 l/min, V / 50 Hz without pressure switch-off Compressor 590 l/min, 10 bar, 3 kw, x 10 l air accumulator Compressor V-MEKO, 360 l/min, 1 x 220 V / 50 Hz Compressor V-MEKO, 360 l/min, 1 x 220 V / 50 Hz, with pressure switch-off Compressor V-MEKO, 360 l/min, 3 x 380 V Compressor V-MEKO, 360 l/min, 3 x 220 V / 60 Hz Compressor V-MEKO, 360 l/min, 3 x 220 V / 60 Hz with pressure switch-off Auxiliary water pump, self-priming with check valve in the suction line, 230 V / 50 Hz, 0.33 kw, 3.4 m 3 /h, max. delivery pressure 6 bar Auxiliary water pump, self-priming with check valve in the suction line, 400 V / 50 Hz, 0.33 kw, 3.4 m 3 /h, max. delivery pressure 6 bar, with hard plug Auxiliary water pump, self-priming with check valve in the suction line, 400 V / 50 Hz, 0.33 kw, 3.4 m 3 /h, max. delivery pressure 6 bar, with CEE plug Water pump 3.4 m 3 /h, self-priming with automatic switch, 230 V / 50 Hz, 0.75 kw, water protected IP 65, with check valve in suction line

64 General accessories General accessories For cleaning the delivery hoses Sponge rubber balls ø mm for delivery hose ID 18 mm for delivery hose ID 20 mm for delivery hose ID 25 mm for delivery hose ID 35 mm for delivery hose ID 50 mm for delivery hose ID mm for delivery hose ID mm for delivery hose ID mm Machines and working accessories 2 1 Fig. Wheel chock steel-plate Wheel chock plastic UK Wheel chock plastic UK Bracket for UK Bracket for UK Bracket for For cleaning and maintenance PM hand lever grease gun with hose Grease cardridge with high performance lubr. grease, 400 g Grease gun small Cleaning brush PM spray gun including 5 m hose Cleaning spray gun V 35, alu. short without nozzle with air fittings Nozzle, steel ø 6/ Nozzle, steel ø 8/ Nozzle, steel ø 10/ Nozzle, steel ø 12/ Lighting set 13 pin connector, 12 V m cable Lighting set 13 pin connector, 24 V m cable Lighting set, width: 1 m 7 pin connector, 24 V m cable Lighting set, width: 1 m 7 pin connector, 12 V m cable Cleaning and care detergent Limpiol l canister (enough for approx m 2 ), biologically decomposable PM pumping aid, 18 l in storage tank, 25 pcs Vehicle cable adapter 7-13 pin, 12 V Vehicle cable adapter 13-7 pin, 12 V Number plate holder with folding frame Soft dock, coupling guard for ball head couplings on Alko chassis (M 760, M 740, M 730)

65 Tools Toolsets Toolset site mixes Toolset floor screed Complete set, : Set, pos. 1-7, : consisting of: Complete set, : Set, pos. 1-5, : consisting of: Part Fig. 1x Smoothing trowel 280 x 130 x 0.7 mm x Swiss Smoother 800 x 130 x 0.7 mm x Facade spattle 350 mm x Plasterer's trowel stainless steel 70 mm x Berner plastering trowel, stainless steel 140 mm x Mesh scraper x Plasterer's float w. sponge rubber cover, coarse pore x Alu float w. wood handle, 1,800 mm x Alu-H-shaped float, 1,000 mm Part Fig. 1x Swiss Smoother 800 x 130 x 0.7 mm x Floor-layer smoothing trowel 500 x 90 x 1.2 mm x Floor-layer smoothing trowel 700 x 90 x 1.2 mm x pair of spikes, screed shoe x Knee protectors, box form x measuring floats 100 cm x measuring floats 200 cm x measuring floats 300 cm Toolset Finish Complete set, : consisting of: Part Fig. 1x Plasterer's float w. sponge rubber cover, coarse pore x Plasterer's float w. sponge rubber cover, fine pore x PU Plasterer's float 280 x 140 mm x PU Plasterer's float 420 x 220 mm x Smoothing trowel plastic, 280 x 140 x 3 mm x Berner plastering trowel, stainless steel 140 mm x Facade spattle 350 mm x Plasterer's trowel stainless steel 70 mm Toolset dry mortar Complete set, : Set, pos. 1-7, : consisting of: Part Fig. 1x Mesh scraper x Smoothing trowel 280 x 130 x 0.7 mm x Swiss Smoother 500 x 130 x 0.7 mm x Facade spattle 350 mm x Plasterer's trowel stainless steel 70 mm x Berner plastering trowel, stainless steel 140 mm x Plasterer's float w. sponge rubber cover, fine pore x Alu-H-shaped float, 1,000 mm x Alu-H-shaped float, 2,000 mm

66 Tools Tools Practical tools for craftsmen in the building line For plasterers Alu-H-shaped float Profile 114 x 50 x 28 mm 1.0 m m m m m Plasterer s float 140 x 280 mm, with sponge rubber cover, coarse-pore Smoothing trowel Plastic 280 x 140 x 3 mm Smoothing trowel in steel version with special wooden handle 280 x 130 x 0.7 mm Alu float with wood handle 1.2 m m m Sponge rubber pad for float 280 x 140 mm with sponge rubber cover, coarse-pore Plasterer s trowel stainless steel, 70 mm stainless steel, 80 mm stainless steel, 100 mm Trowel Freiburger trowel, Nirosta, stainless steel Alu-trapezoidal-float profile 97 x 17 mm 1.0 m m m m m PU plasterer s float made of polyurethan 280 x 140 mm x 180 mm x 220 mm x 240 mm Berner plastering trowel with soft-grip handle stainless steel 140 mm Trowel stainless steel, with straight neck 160 mm mm Cleaning brush stickleback Smoothing trowel in steel version with cylindrical wooden handle 280 x 130 x 0.7 mm Mesh scraper 290 x 150 mm x 170 mm galvanized

67 Tools For plasterers Corner trowel stainless steel, for inside Plaster spatula with BIT 150 mm Plasterer s float 140 x 280 mm, with sponge rubber cover, fine-pore Sponge rubber pad for float, fine 140 x 280 mm sponge rubber cover, fine-pore Plasterer s hatchet with steel tube and rubber handle Steel sledge hammer 1,250 g, with rubber handle Small plasterer s plane 330 x 40 mm Plasterer s plane alu 500 mm long, with 8 blades Facade spattle 500 mm mm, stainless steel, w. soft grip Cutter with wooden handle Rubber plaster cup conical, made of soft PVC Finishing coat scraper tapered

68 Tools For self levelling floor screed layers 1 2 Smoothing and measuring floats, model SLN with 1 horizontal level, dimension: approx. 80 x 17 mm measuring acc.: 1 mm/m = 0,057 in normal position 100 cm cm cm cm cm Floor-layer smoothing trowel handle painted red, with extra long alu fin 500 x 90 mm x 90 mm x 90 mm x 130 x 0.7 mm Self levelling floor screed shoe cover for working on fresh self levelling floor screed Front belt Rear belt Knee protectors harmonica (Fig. 1) box-form (Fig. 2) made of polyurethane, CFC-free production, certified as per DIN EN Strap (without Fig.) 270 mm mm Screed layers working trousers safety clothes with artificial leather trimmings, large knee padding; protection against dampness, zip is reinforced, perfect fit. Screed layers overall safety clothes with artificial leather trimmings, large knee padding; protection against dampness, zip is reinforced, perfect fit. Size Size Size Size Size Size Size Size Size Size Size Size Size Size Levelling tripods with high feet for larger self levelling floor screed heights standard 12 cm high 14 cm Dapling bars made of solid alu pipe 0.8 m m m General Swiss smoother stainless steel, screwed on handle painted red 500 x 135 mm pair of spikes screed shoe for work on fresh screed Protective helmet yellow with PM-imprint

69 Putzmeister worldwide Putzmeister Mörtelmaschinen GmbH Max-Eyth-Str Aichtal Germany Tel +49 (0) Fax +49 (0) Hotline +49 (0) You can find your contact persons in Sales, Marketing, Customer Service and Spare Parts Management on our website: