Nio 3MP LED Display. User Guide MDNC-3321

Transcription

1 Nio 3MP LED Display User Guide MDNC-3321

2

3 NIO 3MP LED Display User Guide MDNC-3321 K /00 10/04/2013

4 Barco nv President Kennedypark 35, 8500 Kortrijk, Belgium Phone: Fax: Support: Visit us at the web: PrintedinBelgium

5 Table of contents TABLE OF CONTENTS 1. Welcome! About the product Symbols What s in the box Parts, controls and connectors Display front view Display rear view Display installation Unlocking the height mechanism Adjusting the display position Removing the connector compartment cover Connecting the signal cables Routing the cables & Reattach the connector compartment cover VESA-mount installation First time starting up Daily operation Recommendations for daily operation Key indicator lights Standby switching Bringing up the OSD menus Navigating through the OSD menus Advanced operation OSD menu language OSD menu automatic close function Power status indicator light Key indicator lights Power lock function Ethernet over USB USB DPMS mode Hibernate Luminance target Viewing modes Display functions Ambient Light Compensation (ALC) Reading rooms Image scaling Display orientation Video input signals Video encoding modes Grayscale conversion modes EDID timings Display info Display status Repackaging instructions Replacing the protection buffer Repacking your display Cleaning your display Front glass Cabinet...34 K NIO 3MP LED DISPLAY 10/04/2013 1

6 Table of contents 8. Important information Safety information Environmental information Regulatory compliance information EMC notice Explanation of symbols Legal disclaimer Technical specifications Open source license information K NIO 3MP LED DISPLAY 10/04/2013

7 1. Welcome! 1. WELCOME! 1.1 About the product Overview Thank you for choosing this NIO 3MP LED Display! NIO 3MP LED Display is an industry-standard 3MP color display system with LED backlights for dependable diagnostic viewing in high-bright color. NIO 3MP LED Display provides an effective display solution for a multitude of applications and modalities, including 3D PACS, 3D echo, ultrasound, orthopedic imaging, CAD, image fusion, nuclear medicine and PET. Confident color reading Equipped with high-bright LED backlights, NIO 3MP LED Display delivers excellent brightness and more shades of gray to detect subtle details more quickly. The unique front sensor ensures you see consistent and precise images at all times for confident diagnoses. On-demand image quality checks As the front sensor works seamlessly together with Barco s online MediCal QAWeb service for automated Quality Assurance and calibration, NIO 3MP LED Display makes sure you are viewing perfect DICOM images at the click of a button without interrupting your workflow. A good investment Using power-efficient LED backlights, NIO 3MP LED Display is as low in power consumption as it is high in brightness. Because it uses less power, the display produces less heat and requires less cooling, which impacts maintenance and operational costs. Additionally, the LED backlights offer a long lifetime even at high brightness providing a high return on your investment. CAUTION: Read all the important safety information before installing and operating your NIO 3MP LED Display. Please refer to the dedicated chapter in this user guide. 1.2 Symbols Symbols in this document The following symbols are used in this document: Caution Warning Info, term definition. General info about the term K NIO 3MP LED DISPLAY 10/04/2013 3

8 1. Welcome! Note: gives extra information about the described subject Tip: gives extra advice about the described subject 1.3 What s in the box Overview Your NIO 3MP LED Display comes with: the display a system tilt and swivel foot thisnio3mpleddisplayuserguide a system CD a DisplayPort cable a DVI cable an USB cable an AC power cord an external power supply If you ordered a Barco display controller, it s also in the box together with its accessories. A dedicated user guide is available on the system CD. Keep your original packaging. It is designed for this display and is the ideal protection during transport and storage. 4 K NIO 3MP LED DISPLAY 10/04/2013

9 2. PARTS, CONTROLS AND CONNECTORS 2. Parts, controls and connectors 2.1 Display front view Overview Image 2-1 Front view 1 Left key 4 Standby key 2 Right key 5 Power LEDs 3 Menu key 6 Bottom downstream USB 6 K NIO 3MP LED DISPLAY 10/04/2013 5

10 2. Parts, controls and connectors 2.2 Display rear view Connector compartment cover closed Image 2-2 Rear view with closed connector compartment cover 6 1 Connector compartment cover 3 Foot lock clip 2 Cable duct 4 Tilt & swivel foot K NIO 3MP LED DISPLAY 10/04/2013

11 2. Parts, controls and connectors Connector compartment cover open Image 2-3 Rear view wit open connector compartment cover VDC power input VDC, 0.5A power output DisplayPort video input Ethernet connector (see note below) USB upstream connector 7 USB downstream connector 4 DVI video input The Ethernet connection is used for maintenance purposes and is not supported for user application. K NIO 3MP LED DISPLAY 10/04/2013 7

12 2. Parts, controls and connectors 8 K NIO 3MP LED DISPLAY 10/04/2013

13 3. Display installation 3. DISPLAY INSTALLATION Prior to installing your NIO 3MP LED Display and connecting all necessary cables, make sure to have a suitable display controller physically installed in your computer. If you are using a Barco display controller, please consult the user guide delivered with it to do this. 3.1 Unlocking the height mechanism To remove the clip: 1. Position the display with its rear side facing you. 2. Pull the red clip out of the fixation hole in the foot. 3. Keep the clip in the dedicated hole in case the display needs to be shipped later. 3.2 Adjusting the display position To adjust the display position 1. Stand at the front side of the panel and take the panel at both sides. 2. Very important: Tilt the panel upwards before changing the orientation. 3. To change from portrait to landscape, turn the panel counterclockwise. 4. To change from landscape to portrait, turn clockwise. K NIO 3MP LED DISPLAY 10/04/2013 9

14 3. Display installation If, after installing the display of the system, you change the panel orientation while an image is on the screen, the result depends on the graphic board and the resolution of the image. In some cases the image will be rotated automatically, in other cases it will not be rotated (e.g., when pixels would be lost after rotation). If necessary, change the image resolution in the display control panel and restart the system after changing the orientation. 3.3 Removing the connector compartment cover To remove the connector compartment cover 1. Gently push the two lips on top of the cover 2. Pull the top of the cover slightly away from the display and lift the cover upwards. 3.4 Connecting the signal cables CAUTION: Only connect one of the two video links. Connecting both inputs simultaneously will result in driver errors. To connect the signal cables to the display: To get access to the connectors, remove the connector compartment cover. See "Removing the connector compartment cover", page 10. You may connect the display to a display controller by using the DVI or the DP connection. The input selection of the device is automatically done. By default, the DisplayPort input has priority over the DVI input. This can be changed in the OSD menu. 10 K NIO 3MP LED DISPLAY 10/04/2013

15 3. Display installation 1. Connect the DVI or DP of the display controller to the DVI or DP connector of the display. 2. If you want to make use of the display s USB upstream connector, connect a PC USB downstream connector to the display s USB upstream connector. 3. If you have chosen to use the display s USB downstream connector, connect a USB device to the downstream connector. 4. Connect the supplied external DC power supply to the +24 Vdc power input of the display. 5. Plug the mains connector of the external DC power supply to a grounded power outlet by means of one of the supplied power cables. K NIO 3MP LED DISPLAY 10/04/

16 3. Display installation 3.5 Routing the cables & Reattach the connector compartment cover To route the cables 1. Route all connected cables through the cable routing channel in the stand of your display. Tip: The cable straps at the inside of the connector compartment allow you to fix the cables for better shielding of the cables. To Reattach the connector compartment cover 1. Reattach the connector compartment cover by sliding the cover s bottom in position and then push the cover s top. You ll hear a click sound of the cover s clips when the connector compartment cover is in position. 3.6 VESA-mount installation WARNING: Never move a display attached to an arm by pulling or pushing the display itself. Instead, make sure that the arm is equipped with a VESA approved handle and use this to move the display. Please refer to the instruction manual of the arm for more information and instructions. 12 K NIO 3MP LED DISPLAY 10/04/2013

17 3. Display installation WARNING: Use an arm that is approved by VESA (according to the VESA 100 mm standard). Use an arm that can support the weight of the display. Refer to the technical specifications of this display for the applicable weight. Overview The panel, standard attached to the tilt & swivel foot, is compatible with the VESA 100 mm standard. So itcanbeusedwithanarmstandaccordingtothevesa100mmstandard. Therefore, the tilt & swivel foot must be removed from the panel. 1. Fasten the height mechanism of the foot by putting the red clip in the hole "Unlocking the height mechanism", page Put the display face down on a clean and soft surface. Be careful not to damage the panel screen. 3. Remove the plastic cover with a flathead screw driver. 4. Slide the plastic cover over the neck of the foot. K NIO 3MP LED DISPLAY 10/04/

18 3. Display installation 5. Remove the four screws fixing the foot while supporting the foot. 6. Attach the arm stand firmly to the panel using 4 screws M4 x 8 mm. 3.7 First time starting up Overview You are now ready to start up your NIO 3MP LED Display for the first time. 1. Switch on your NIO 3MP LED Display as described in "Standby switching", page Turn on the computer connected to your display. If you have properly installed your display and display controller, the Windows start-up messages will appear once the boot procedure is finished. Your NIO 3MP LED Display will be running in a basic video mode at a default refresh rate when first time starting up. If you are using a Barco display controller, please consult the user guide delivered with it to install the drivers, software and documentation. When this is done, your display will automatically detect the connected video input signal(s) and apply the correct video mode and refresh rate. 14 K NIO 3MP LED DISPLAY 10/04/2013

19 4. Daily operation 4. DAILY OPERATION 4.1 Recommendations for daily operation Optimize the lifetime of your display Enabling the Display Power Management System (DPMS) of your display will optimize its diagnostic lifetime by automatically switching off the backlight when the display is not used for a specified period of time. By default, DPMS is enabled on your display, but it also needs to be activated on your workstation. To do this, go to Power Options Properties in the Control Panel. Barco recommends setting DPMS activation after 20 minutes of non-usage. Use a screen saver to avoid image retention Prolonged operation of an LCD with the same content on the same screen area may result in a form of image retention. You can avoid or significantly reduce the occurrence of this phenomenon by using a screen saver. You can activate a screen saver in the Display properties window of your workstation. Barco recommends setting screen saver activation after 5 minutes of non-usage. good screen saver displays moving content. A In case you are working with the same image or an application with static image elements for several hours continuously (so that the screen saver is not activated), change the image content regularly to avoid image retention of the static elements. Understand pixel technology LCD displays use technology based on pixels. As a normal tolerance in the manufacturing of the LCD, a limited number of these pixels may remain either dark or permanently lit, without affecting the diagnostic performance of the product. To ensure optimal product quality, Barco applies strict selection criteria for its LCD panels. To learn more about LCD technology and missing pixels, consult the dedicated white papers available at Enhance user comfort Every Barco multi-head display system is color matched with the highest specifications in the market. Barco recommends keeping color-matched displays together. Furthermore, it is important to use all displays of a multi-head configuration at the same rate to preserve color matching throughout the economic lifetime of the system. K NIO 3MP LED DISPLAY 10/04/

20 4. Daily operation Maximize quality assurance The MediCal QAWeb system offers online service for high-grade Quality Assurance, providing maximum diagnostic confidence and uptime. Barco recommends to install MediCal QAWeb Agent and apply the default QAWeb policy at least. This policy includes calibration on regular intervals. Connecting to MediCal QAWeb Server offers even more possibilities. Learn more and sign up for the free MediCal QAWeb Essential level at Key indicator lights About the key indicator lights By default, the indicator lights of the keys will be dimmed which makes the keys unavailable at that moment. To make the keys illuminate and available for further actions touch one of the keys. As a result, all keys will be illuminated and are now available for further actions. However, if no further actions are taken within the following 5 seconds, the keys will dim again. The key auto-dim function can be disabled in the OSD menus. Please refer to "Key indicator lights", page 20 for detailed instructions on how to do this. 4.3 Standby switching About standby switching The connected power supply also provides a switch that can be used to turn the power completely off. To use the display, please make sure to switch on this power supply. This can be done by pushing the on/off switch on the power supply into the position. Switching on the display while it is in standby mode or vice versa can be done by: 1. Illuminate the keys as previously described. 2. While the keys are illuminated, touch the standby key for approximately 2 seconds. As a result, the display will switch on or will switch to standby mode. When the display is switched on, the power LED is white. When the display is in standby mode, the power LED is orange. The power LED can be disabled in the OSD menus. Please refer to"power status indicator light", page 19 for detailed instructions on how to do this. In case of a power outage recovery, your display will always start-up in the power mode it was in before the power interruption (i.e. standby or on). This protects your display against inadvertent image retention problems. 16 K NIO 3MP LED DISPLAY 10/04/2013

21 4. Daily operation 4.4 Bringing up the OSD menus How to bring up the OSD menus TheOSDmenuallowsyoutoconfigure different settings to make your NIO 3MP LED Display fit your needs within your working environment. Also, you can retrieve general information about your display and its current configuration settings through the OSD menu. Bringing up the OSD menus can be done by: 1. If not already done so, switch on the display as previously described. 2. Illuminate the keys as previously described. 3. While the keys are illuminated, touch the menu key. As a result, the OSD main menu comes up in the bottom right corner of the screen. However, if no further actions are taken within the following 90 seconds, the OSD will disappear again. The OSD menu auto-exit function can be disabled in the OSD menu. Please refer to "OSD menu automatic close function", page 19 for detailed instructions on how to do this. 4.5 Navigating through the OSD menus How to navigate through the OSD menus Navigating through the OSD menus can be done by: Use the up/down keys to move through the (sub)menus, change values or make selections. To go into a submenu or confirm adjustments and selections, use the menu key. Us the standby key to cancel adjustments or exit a (sub)menu. Exit all OSD menus at once by touching the standby key for approximately 2 seconds. The key icons are displayed above the keys, adapted to the function thatitisusedfor (menu dependant). K NIO 3MP LED DISPLAY 10/04/

22 4. Daily operation 18 K NIO 3MP LED DISPLAY 10/04/2013

23 5. Advanced operation 5. ADVANCED OPERATION 5.1 OSD menu language About the OSD menu language By default, the OSD menu comes up in English. However, there s a wide range of other languages available for the OSD menu of your NIO 3MP LED Display. To change the language of the OSD menu: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > User Interface > Menu menu. 3. Enter the Language submenu. 4. Select one of the available languages and confirm. 5.2 OSD menu automatic close function About the OSD menu automatic close function By default, the OSD menu will disappear automatically after approximately 90 seconds of inactivity. However, this function can be disabled so that the OSD menu remains on the screen until manually closed. To enable/disable the OSD menu automatic close function: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > User Interface > Menu menu. 3. Enter the Automatic Close submenu. 4. Select Enabled/Disabled as desired and confirm. 5.3 Power status indicator light About the power status indicator light By default, when the display is switched on, the power status indicator light is dimmed. This behavior can be changed so that the power status indicator light will be blue when the display is switched on. When the display is in stand-by mode, the power status indicator light will always turn orange, even when the power status indicator light is disabled. To enable/disable the power status indicator light: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > User Interface > Indicator Lights menu. 3. Enter the Power Status submenu. 4. Select Enabled/Disabled as desired and confirm. K NIO 3MP LED DISPLAY 10/04/

24 5. Advanced operation 5.4 Key indicator lights About the key indicator lights By default, after lighting up, the key indicator lights will dim again if no further actions are taken within the following 5 seconds. However, this behavior can be changed so that the key indicator lights are always on or always off. To configure the key indicator lights 1. Bring up the OSD main menu. 2. Navigate to the Configuration > User Interface > Indicator Lights menu. 3. Enter the Keys submenu. 4. Select Automatic/Always On/Always Off as desired and confirm. 5.5 Power lock function About the power lock function By enabling the power lock function, the NIO 3MP LED Display is forced to remain switched on. This means that it can t be switched to stand-by mode until the power lock function is disabled again. To enable/disable the power lock function: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > User Interface > Controls menu. 3. Enter the Power Lock submenu. 4. Select Enabled/Disabled as desired and confirm. 5.6 Ethernet over USB About Eth. over USB By default, the Ethernet over USB will be disabled. This does not disable the USB hub and still allows to make use of the display s USB downstream connectors and any external devices connected to it (keyboard,mouse,...). Please note that a connection from a PC USB downstream connector to the display s USB upstream connector is required to be able to use this functionality. By enabling the Ethernet over USB, you allow the internal NIO 3MP LED Display processor to communicate directly over USB with the connected PC. Enabling the USB endpoint is only recommended when you are using a non-barco display controller. If you are using a Barco display controller, this communication will automatically be done over the connected video cable(s). To enable/disable the eth. over USB: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > Connectivity menu. 3. Enter the Eth. over USB submenu. 4. Select Enabled/Disabled as desired and confirm. 20 K NIO 3MP LED DISPLAY 10/04/2013

25 5.7 USB About USB 5. Advanced operation By default, USB will be enabled. This will allow the connected PC to communicate directly over USB with the internal NIO 3MP LED Display processor. By disabling USB, communication between the internal NIO 3MP LED Display processor and the connected PC will not be possible. This does not disable the USB hub and still allows to make use of the display s USB downstream connectors and any external devices connected to it (keyboard, mouse,...). Please note that a connection from a PC USB downstream connector to the display s USB upstream connector is required to be able to use this functionality. Enabling the USB endpoint is only recommended when you are using a non-barco display controller. If you are using a Barco display controller, this communication will automatically be done over the connected video cable(s). To enable/disable USB: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > Connectivity menu. 3. Enter the USB submenu. 4. Select Enabled/Disabled as desired and confirm. 5.8 DPMS mode About DPMS mode Enabling the Display Power Management System (DPMS) mode on your display will optimize its diagnostic lifetime by automatically switching off the backlight when the display is not used for a specified period of time. By default, DPMS mode is enabled on your display, but it also needs to be activated on your workstation. To do this, go to the Power options properties window of your workstation. Barco recommends setting DPMS activation after 20 minutes of non-usage. When DPMS mode is enabled on your display, an additional OSD power saving function becomes available: hibernate. Please refer to "Display functions", page 23 for more information on hibernation and how to enable this function. To enable/disable DPMS mode on your display: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > Power Management menu. 3. Enter the DPMS Mode submenu. 4. Select Enabled/Disabled as desired and confirm. K NIO 3MP LED DISPLAY 10/04/

26 5. Advanced operation 5.9 Hibernate About hibernate Enabling hibernation will not only switch off the backlight but will also force the display to disable other functionalities so that power consumption is further reduced to a minimum. This happens after a specific period of time which can be manually adjusted. Hibernate can only be enabled on your display when the DPMS mode is enabled first. Therefore, please refer to "DPMS mode", page 21 to do this. To enable/disable hibernation on your display: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > Power Management menu. 3. Enter the Hibernate submenu. 4. Select Enabled/Disabled as desired and confirm. To specify the hibernate timeout: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > Power Management menu. 3. Enter the Hibernate Timeout submenu. 4. Set the timeout value as desired and confirm Luminance target About the luminance target The luminance target of your NIO 3MP LED Display is adjustable over a predefined range. When you change the luminance target, the display will adjust its backlight to reach the target. To set the luminance target: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > Calibration menu. 3. Enter the Luminance Target submenu. 4. Set a luminance target value as desired and confirm Viewing modes About viewing modes The NIO 3MP LED Display can be used in two viewing modes: 22 K NIO 3MP LED DISPLAY 10/04/2013

27 5. Advanced operation Diagnostic Text This mode provides the full calibrated luminance and is intended for using the display for diagnostic purposes. In this mode, the luminance is reduced to approximately half of the luminance. This is intended for using the display with office applications such as word processing. Please note that text mode is not persistent, once powered off, the unit will restart in diagnostic mode. As the NIO 3MP LED Display is intended to be used in a diagnostic environment, the diagnostic mode should always be selected. To select a viewing mode: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > Calibration menu. 3. Enter the Viewing Mode submenu. 4. Select Diagnostic/Text as desired and confirm Display functions About display functions Native, uncorrected panels will display all grayscale/color levels with equal luminance increments. Studies have shown however, that in medical images certain grayscale/color parts contain more diagnostic information then others. To respond to these conclusions, display functions have been defined. These functions emphasize on these parts containing crucial diagnostic information by correcting the native panel behavior. Native Dynamic Gamma 1.8 Dynamic Gamma 2.2 DICOM User Gamma 1.8 Gamma 2.2 If you select Native, the native panel behavior will not be corrected. These are gamma functions that are shifted to take into account the non-zero luminance of an LCD panel when driven with a black signal. They are especially useful in CT applications to improve the perception of low Hounsfield values. DICOM (Digital Imaging and Communications in Medicine) is an international standard that was developed to improve the quality and communication of digital images in radiology. In short, the DICOM display function results in more visible grayscales in the images. Barco recommends selecting the DICOM display function for most medical viewing applications. This display function will be automatically selected when display functions are defined by MediCal QAWeb. Select one of these display functions in case the display is to replace a CRT display with a gamma of 1.8 or 2.2 respectively. To select a display function: 1. Bring up the OSD main menu. K NIO 3MP LED DISPLAY 10/04/

28 5. Advanced operation 2. Navigate to the Configuration > Calibration menu. 3. Enter the Display Function submenu. 4. Select one of the available display functions and confirm Ambient Light Compensation (ALC) About ALC Ambient Light Compensation (ALC) can only be enabled on your display when the DI- COM display function is selected. Therefore, please refer to "Display functions", page 23 to correctly set the display function. When ALC is enabled, the DICOM display function will be recalculated taking a preset ambient light correction value into account. This value is determined by the selected reading room. Therefore, it is also important to select a realistic reading room when enabling ALC. This can be done by following the instructions in "Reading rooms", page 24. To enable/disable ALC: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > Calibration > Ambient Light menu. 3. Enter the Ambient Light Compensation submenu. 4. Select Enabled/Disabled as desired and confirm Reading rooms About reading rooms Reading rooms can only be selected when the DICOM display function is selected. Therefore, please refer to "Display functions", page 23 to correctly set the display function. The American Association ofphysicists in Medicine (AAPM) composed a list ofpre-defined reading rooms. Each of these reading rooms are defined by following parameters: the maximum light allowed in this type of room the preset ambient light correction value for this reading room These parameters are stored in your display and determine the preset ambient light correction value to take into account to recalculate the DICOM display function when Ambient Light Compensation (ALC) is enabled. Please refer to "Ambient Light Compensation (ALC)", page 24 to enable ALC. The available reading rooms for your NIO 3MP LED Display are: CR/DR/ MAMMO CT/MR/NM Corresponds to light conditions in diagnostic reading rooms for computed radiology, digital radiology or mammography. This setting has the lowest maximum ambient light. Corresponds to light conditions in diagnostic reading rooms for computed tomography, magnetic resonance or nuclear medicine scans. 24 K NIO 3MP LED DISPLAY 10/04/2013

29 5. Advanced operation Staff Office Clinical Viewing Room Emergency Room Operating Room Corresponds to light conditions in office rooms. Corresponds to light conditions in diagnostic reading rooms for clinical viewing. Corresponds to light conditions in emergency rooms. Corresponds to light conditions in operating rooms. This setting has the highest maximum ambient light. To select a reading room: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > Calibration > Ambient Light menu. 3. Enter the Reading Room submenu. 4. Select one of the available reading rooms and confirm Image scaling About image scaling Enabling image scaling will multiply each individual pixel to one or more adjacent pixels so that the size of the displayed image will be a multiple of the original image source video input signal. Image scaling is only possible when the resolution of your display s video input signal is less than or equal to half the maximum resolution of the display. To enable/disable image scaling: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > Image Source menu. 3. Enter the Scaling submenu. 4. Select Enabled/Disabled as desired and confirm Display orientation About Display orientation Your display automatically detects its physical orientation (portrait or landscape) and, by default, automatically adjusts the image orientation to this. This means that when your display is physically rotated, the image will rotate along. The OSD menu however, allows to overrule this behavior and force the image orientation to portrait or landscape regardless of the physical orientation of the display. This may be especially useful when operating your display with the screen facing upwards. To set the Display orientation 1. Bring up the OSD main menu. 2. Navigate to the Configuration > Image Sources menu. 3. Enter the Display Orientation submenu. 4. Select Landscape/Portrait/Automatic as desired and confirm. K NIO 3MP LED DISPLAY 10/04/

30 5. Advanced operation 5.17 Video input signals About input signals The available input signals for your display are: DisplayPort 1 DVI 1 Automatic Selection The input corresponding to the DisplayPort connector. The input corresponding to the DVI connector. The input is automatically selected. To manually select a video input signal: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > Image Source menu. 3. Enter the Input Signal submenu. 4. Select one of the available input signals and confirm Video encoding modes About video encoding modes Video encoding modes specify how the color and luminance information is encoded in the video signal. In consumer displays, this is usually done by a limited 8-bit encoding mechanism. Your NIO 3MP LED Display however, features 10-bit encoding enabling it to better match the DICOM defined grayscale range. Such an extensive range is necessary to comply with the guidelines set forward by the latest medical guidelines. The available video encoding modes for your display are listed below. Please note that the display controller connected to your display might not always support all these video encoding modes. Standard HDR1 HDR2 Dual 10 (only with Barco display controller) Automatic This mode uses the standard 8 bit encoding mechanism. This mode features 10-bit video encoding following the High Dynamic Range (HDR) standard, usually used on color displays. HDR2 is a Barco specific mode featuring 10-bit video encoding following the High Dynamic Range (HDR) standard but allowing full refresh rate (which is not always possible with HDR1). This mode is usually used on color displays. Dual 10 is a Barco specific 10-bit video encoding mode which is usually used on grayscale displays and which allows full refresh rate. When selecting this option, your NIO 3MP LED Display will automatically assign the correct video encoding settings to the connected video input signals. To manually select a video encoding mode: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > Image Source menu. 26 K NIO 3MP LED DISPLAY 10/04/2013

31 5. Advanced operation 3. Enter the Video Encoding submenu. 4. Select one of the available video encoding modes and confirm Grayscale conversion modes About grayscale conversion modes Grayscale conversion modes specify how color generated on the display controller is converted to grayscale in your display. The available grayscale conversion modes are: No Conversion Use Red Channel Use Green Channel Use Blue Channel Use All Channels This mode is intended for grayscale displays where gray is sent over the red channel. This mode is intended for grayscale displays where gray is sent over the green channel. This mode is intended for grayscale displays where gray is sent over the blue channel. This mode is intended for grayscale displays where gray is sent over the red, green and blue channel. This is done by means of a standard conversion mechanism where 30% red, 59% green and 11% blue are used to generate gray. To manually select a grayscale conversion mode: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > Image Source menu. 3. Enter the Grayscale Conversion submenu. 4. Select one of the available color conversion modes and confirm EDID timings About EDID timings Following EDID timings are available for your NIO 3MP LED Display: Refresh Rate Preferred Orientation Color Depth Allows to manually select the refresh rate of the image source video input signal depending on the maximum refresh rate of the display controller connected to your display. Allows to change the orientation of the image source video input signal to landscape, portrait or to let the display automatically assign the correct orientation. Allows to change the color depth to 8 or to 10 bit. To manually set EDID timings: 1. Bring up the OSD main menu. 2. Navigate to the Configuration > Image Source menu. 3. Enter the Timings submenu. K NIO 3MP LED DISPLAY 10/04/

32 5. Advanced operation 4. Select Refresh Rate, Preferred Orientation or Color Depth. 5. Select one of the available settings and confirm Display info About display info Your display serial number, color type, native resolution, firmware versions, etc. are available in a dedicated submenu of the OSD menu. To retrieve info about your display: 1. Bring up the OSD main menu. 2. Navigate to the About this Display menu. 3. Enter the Display or Firmware submenu as desired Display status About display status The Status submenu of the OSD menu provides info on the current status of your display (runtimes, temperatures, etc.), the status of the connected image sources (video encoding mode, timings, etc.), the current calibration status of your display (display function, luminance, ALC, etc.) and the status about activated connections. To retrieve the status of your display: 1. Bring up the OSD main menu. 2. Navigate to the Status menu. 3. Enter the Display, Image Sources, Calibration or Connectivity submenu as desired. 28 K NIO 3MP LED DISPLAY 10/04/2013

33 6. REPACKAGING INSTRUCTIONS 6. Repackaging instructions WARNING: Before repacking the display, follow the instruction to replace the protection buffer to prevent damage to the display. Overview of the packaging Image 6-1 Packaging 1 Bottom box 5 Box (Power supply, cables) 2 Bottom buffer 6 Top buffer K NIO 3MP LED DISPLAY 10/04/

34 6. Repackaging instructions 3 Protection buffer 7 Top box 4 Display 8 Display controller box 6.1 Replacing the protection buffer How to replace the protection buffer 1. Place the display on a stable surface. 2. Put the display in the lowest position and fasten the height mechanism, see "Unlocking the height mechanism", page Very important: Tilt the panel away from the foot before changing the orientation. 4. Turn the panel counterclockwise to put the panel in landscape orientation, see "Adjusting the display position", page Place the connector compartment cover in the protection buffer. 6. Slide the protection buffer over the foot of the display. 7. Tilt the panel back to the foot. Image 6-2 Placing the protection buffer. 30 K NIO 3MP LED DISPLAY 10/04/2013

35 6. Repackaging instructions 6.2 Repacking your display How to repack your display 1. Place the empty bottom box on a stable surface. 2. Place the bottom buffer in the box. 3. Put the display together with the protection buffer (see "Replacing the protection buffer", page 30) in the dedicated cavity of the bottom buffer. 4. Put the top buffer on top of the display. 5. Slide the top box over the bottom box. 6. Use the three lock bayonets to lock the box x 3 K NIO 3MP LED DISPLAY 10/04/

36 6. Repackaging instructions 32 K NIO 3MP LED DISPLAY 10/04/2013

37 7. Cleaning your display 7. CLEANING YOUR DISPLAY CAUTION: Precautions in case you have a NIO 3MP LED Display. Take care not to damage or scratch the front filter or LCD panel. Be careful with rings or other jewelry that can touch the front filter. Do not apply pressure on the front filter or LCD panel. Do not apply or spray liquid directly to the front filter, panel or cabinet as excess liquid may cause damage to internal electronics. Instead, apply the liquid to the cleaning cloth. 7.1 Front glass Cleaning of the front glass Clean the front glass using a sponge, cleaning cloth or soft tissue, lightly moistened with one of the following tested products: Flux Windex Glass Plus Bohle glass cleaner Mr. Proper Pril Ajax glass cleaner Sidolin glass cleaner In case none of the above cleaning products is available, use plain water. WARNING: Take care not to damage or scratch the front glass. Be careful with rings or other jewelry and do not apply excessive pressure on the front glass. WARNING: Do not apply or spray liquid directly to the front glass as excess liquid may cause damage to internal electronics. Instead, apply the liquid to the cleaning cloth. K NIO 3MP LED DISPLAY 10/04/

38 7. Cleaning your display WARNING: Do not use following products: Alcohol/solvents at higher concentration > 5% Strong alkalis lye, strong solvents Acid Detergents with fluoride Detergents with ammonia Detergents with abrasives Steel wool Sponge with abrasives Steel blades Cloth with steel thread 7.2 Cabinet Cleaning of the cabinet 1. Clean the cabinet using a soft cotton cloth, lightly moistened with a recognized cleaning product for medical equipment. The cabinet has been tested for resistance to the following products: - Cidex, Betadine - Alcohol (isopropyl and Ethyl) - Ammonia-based cleaners (Windex) - Aquasonic Gel In case none of the above cleaning products is available, use plain water. Caution: Do not apply or spray liquid directly to the cabinet as excess liquid may cause damage to internal electronics. Instead, apply the liquid to the cleaning cloth. 2. Repeat with water only. 3. Wipe dry with a dry cloth. 34 K NIO 3MP LED DISPLAY 10/04/2013

39 8. Important information 8. IMPORTANT INFORMATION 8.1 Safety information General recommendations Read the safety and operating instructions before operating the device. Retain safety and operating instructions for future reference. Adhere to all warnings on the device and in the operating instructions manual. Follow all instructions for operation and use. Electrical Shock Do not modify this equipment without authorization of the manufacturer. No user-serviceable part inside. The equipment should be opened only by qualified service personnel. Type of protection (electrical): Display with external power supply: Class I equipment. Degree of safety (flammable anesthetic mixture): Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide. Non-patient care equipment Equipment primarily for use in a health care facility that is intended for use where contact with a patient is unlikely (no applied part). Power connection Equipment with external 24 VDC power supply Power requirements: The equipment must be powered using the delivered medical approved 24 VDC ( ) SELV power supply. The medical approved DC ( ) power supply must be powered by the AC mains voltage. To avoid the risk of electric shock, this equipment must only be connected to a supply mains with protective earth. The equipment should be installed near an easily accessible outlet. The equipment is intended for continuous operation. Transient over-voltage If the device is not used for a long time, disconnect it from the AC inlet to avoid damage by transient over-voltage. To fully disengage the power to the device, please disconnect the power cord from the AC inlet. K NIO 3MP LED DISPLAY 10/04/

40 8. Important information Power cords: Utilize a UL-listed detachable power cord, 3-wire, type SJ or equivalent, 18 AWG min., rated 250 V min., provided with a hospital-grade type plug 5-15P configuration for 120V application, or 6-15P for 240V application. Do not overload wall outlets and extension cords as this may result in fire or electric shock. Mains lead protection (U.S.: Power cord): Power cords should be routed so that they are not likely to be walked upon or pinched by items placed upon or against them, paying particular attention to cords at plugs and receptacles. Water and moisture Never expose the display to rain or moisture. Never use the display near water - e.g. near a bathtub, washbasin, swimming pool, kitchen sink, laundry tuborinawetbasement. Ventilation Do not cover or block any ventilation openings in the cover of the set. When installing the device in a cupboard or another closed location, heed the necessary space between the set and the sides of the cupboard. Installation Place the device on a flat, solid and stable surface that can support the weight of at least 3 devices. If you use an unstable cart or stand, the device may fall, causing serious injury to a child or adult, and serious damage to the device. This apparatus conforms to: CE0120 (MDD 93/42/EEC; A1:2007/47/EC class IIb product), CE /108/EC, CE - 93/42/EEC; A1:2007/47/EC class II b, IEC : A1:2009 (2ND EDITION), IEC : A1:2012, ANSI/AAMI ES : C1: A1:2012, CAN/CSAC22.2 No :2008, DEMKO - EN :2006, EN :2007, CCC - GB GB GB , KC, VCCI, FCC class B, ICES-001 Level B, FDA 510(k), RoHS National Scandinavian Deviations for CL : Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan" Norway: "Apparatet må tilkoples jordet stikkontakt" Sweden: "Apparaten skall anslutas till jordat uttag" 8.2 Environmental information Disposal information (Waste Electrical and Electronic Equipment) This symbol on the device indicates that, under European Directive 2002/96/EC governing waste from electrical and electronic equipment, this device must not be disposed of with other municipal waste. Please dispose of your waste device by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these devices from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. For more information about recycling of this device, please contact your local city office or your municipal waste disposal service. For details, please visit the Barco website at: Barco/weee. 36 K NIO 3MP LED DISPLAY 10/04/2013

41 8. Important information Turkey RoHS compliance Republic of Turkey: In conformity with the EEE Regulation Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur 中国大陆 RoHS Chinese Mainland RoHS 根据中国大陆 电子信息产品污染控制管理办法 ( 也称为中国大陆 RoHS), 以下部分列出了 Barco 产品中可能包含的有毒和 / 或有害物质的名称和含量 中国大陆 RoHS 指令包含在中国信息产业部 MCV 标准 : 电子信息产品中有毒物质的限量要求 中 According to the China Administration on Control of Pollution Caused by Electronic Information Products (Also called RoHS of Chinese Mainland), the table below lists the names and contents of toxic and/or hazardous substances that Barco s product may contain. The RoHS of Chinese Mainland is included in the MCV standard of the Ministry of Information Industry of China, in the section Limit Requirements of toxic substances in Electronic Information Products. 零件项目 ( 名称 ) Component name 印制电路配件 Printed Circuit Assemblies 液晶面板 LCD panel 外接电 ( 线 ) 缆 External Cables 內部线路 Internal wiring 金属外壳 Metal enclosure 塑胶外壳 Plastic enclosure 散热片 ( 器 ) Heatsinks 电源供应器 Power Supply Unit 风扇 Fan 文件说明书 Paper Manuals 光盘说明书 CD manual 有毒有害物质或元素 Hazardous substances and elements 铅 Pb 汞 Hg 镉 Cd 六价铬 Cr6+ 多溴联苯 PBB x o o o o o x o o o o o x o o o o o o o o o o o o o o o o o o o o o o o o o o o o o x o o o o o o o o o o o o o o o o o o o o o o o 多溴二苯醚 PBDE K NIO 3MP LED DISPLAY 10/04/

42 8. Important information 零件项目 ( 名称 ) Component name 有毒有害物质或元素 Hazardous substances and elements 铅 Pb 汞 Hg 镉 Cd 六价铬 Cr6+ 多溴联苯 PBB 多溴二苯醚 PBDE O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 标准规定的限量要求以下. O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 标准规定的 限量要求. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T 在中国大陆销售的相应电子信息产品 (EIP) 都必须遵照中国大陆 电子信息产品污染控制标识要求 标准贴上环保使用期限 (EFUP) 标签 Barco 产品所采用的 EFUP 标签 ( 请参阅实例, 徽标内部的编号使用于制定产品 ) 基于中国大陆的 电子信息产品环保使用期限通则 标准 All Electronic Information Products (EIP) that are sold within Chinese Mainland must comply with the Electronic Information Products Pollution Control Labeling Standard of Chinese Mainland, marked with the Environmental Friendly Use Period (EFUP) logo. The number inside the EFUP logo that Barco uses (please refer to the photo) is based on the Standard of Electronic Information Products Environmental Friendly Use Period of Chinese Mainland Regulatory compliance information Indications for use The NIO 3MP LED Display is intended to be used as a tool in displaying and viewing digital images (excluding digital mammography) for review and analysis by trained medical practitioners. Caution (USA): Federal law restricts this device to sale by or on the order of a physician. (Details & exemptions are in the Code of Federal Regulations Title 21, 801 Part D). FCC class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be 38 K NIO 3MP LED DISPLAY 10/04/2013

43 8. Important information determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. Canadian notice This ISM device complies with Canadian ICES-001. Cet appareil ISM est conforme à la norme NMB-001 du Canada. 8.4 EMC notice General information No specific requirement on the use of external cables or other accessories except power supply. With the installation of the device, use only the delivered power supply or a spare part provided by the legal manufacturer. Using another can result in a decrease of the immunity level of the device. Electromagnetic emissions The NIO 3MP LED Display is intended for use in the electromagnetic environment specified below. The customer or the user of the NIO 3MP LED Display should assure that it is used in such an environment. Emissions test Compliance Electromagnetic environment Guidance RF emissions CISPR 11 Group 1 The NIO 3MP LED Display uses RF energy only for its internal function. Therefore, its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment. RF emissions Class B The NIO 3MP LED Display is suitable for use in all CISPR 11 Harmonic emissions Class D establishments, including domestic establishments and IEC those directly connected to the Voltage fluctuations/ flicker Complies public low-voltage power supply emissions network that supplies buildings IEC used for domestic purposes. This NIO 3MP LED Display complies with appropriate medical EMC standards on emissions to, and interference from surrounding equipment. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Interference can be determined by turning the equipment off and on. If this equipment does cause harmful interference to, or suffer from harmful interference of, surrounding equipment, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna or equipment. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced technician for help. K NIO 3MP LED DISPLAY 10/04/