THE SPORTS TIMING EXPERTS

Transcription

1 THE SPORTS TIMING EXPERTS Track & Field

2 min. sec. 1/100 hletik Photo Finish System 1 HS- e-start SU 4 BANG WS + Timy W 6 RLSc Display Board Time 8 WTN-PB Stadium Cabling 10 OPTIc 11 PC-Headset 1 Notebook OPTIc 1 PoE Timing Room

3 min. sec. 1/100 Photo Finish System hletik No matter how large the track & field event, can provide the complete equipment for its execution. The system on the left is the basic system for track competitions in the stadium. The system contains a photo finish camera OPTIc and a photocell for the finish. The start is signalized by an electronic start gun and a loud speaker. The starter can communicate with the timing room through the headset. The wind gauge is positioned at the 0 meter mark next to the sprint track. The wind gauge terminal Timy W is connected to the photo finish PC so that measuring the wind is controlled automatically by the photo finish. The unofficial winning time is shown on the display board at the finish. Photo Finish OPTIc photo finish camera OPTIc in versions: - OPTIc basic system - OPITc-PRO professional system with additional features e-start start impulse transmitter (replaces start gun for starter) with integrated flash light for cable connection to BANG or BANG CW and timing system Start Unit SU speech amplifier for communication through headset Headset HS- for communication with timer and for oral commands via BANG or BANG CW Finish Threefold-Photocell RLSc with three photocells integrated in one casing for controlling the photo finish recording BANG electronic start system consisting of a mobile loud speaker with integrated amplifier, available in three versions: cabled, wireless or both combined Radio Push Button WTN-PB radio push button for triggering false start signal Wind Gauge WS for measuring the wind velocity for runs and long jump Display Board Time numerical LED display board (e. g. D-LINE0-O-6-E0) Terminal Timy W terminal for wind gauge Fixed Stadium Cabling TB F distributor for permanent cabling in the timing room TB A-E distributor for permanent cabling in manhole manhole A and E TB W distributor for permanent cabling manhole wind Mobile Stadium Cabling TBM F1 distributor for mobile cabling in the timing room TBM A-E distributor for mobile infield cabling

4 hletik Photo Finish OPTIc The photo finish system OPTIc takes over the technical leadership. It has a recording rate of up to 0,000 lines per second (fps) with up to,016 vertical pixels. This makes it the perfect timing device for every kind of sport which relies on good photo finish images for precise results. Features such as -D images, autofocus, and automatic iris control make the system user-friendly. The VoIP enables communication with the starter, without the timing operator having to use a headset. Technical Data vertical resolution: up to,016 pixel scan rate (fps): up to 0,000 lines per second recording time: unlimited, depends on PC hardware timing: temperature compensated quartz oscillator TCXO, +/-0.06 ppm at C (0.000 s/h) power supply: PoE+ oder VDC temperature range: -0 C bis +0 C Standard Network A simple data connection with almost every PC is possible via Ethernet or WLAN. Autofocus With the motor zoom of practical functions like autofocus and automatic iris adjustment can be accessed. LiveView The camera image can be displayed and set via WLAN, on a mobile phone or tablet. Through this, the OPTIc camera can easy, quick and accurately be adjusted even though it is placed far away from the PC and has no motor zoom. -D Image Adjustment With the new -D image setting (max.,016 x 60 pixels), the camera can be aligned with the finish line in the shortest possible way. High-speed Camera with -D Images With its 100 Hz -D time-measuring fullscreen mode, the OPTIc is ideal for sports such as swimming and rowing. Since the OPTIc has a built-in timing device, exactly synchronized 100 images per second can be guaranteed. PC Software The modern, powerful OPTIc NET software enables a quick and easy evaluation of the photo finish picture. The following operating systems are supported: Windows/Windows8/Windows10 4

5 Leichtathletik Photo Finish OPTIc The photo finish system OPTIc is available in two versions OPTIc Basic System The photo finish system with a recording rate of,000 lines per second and 1,60 pixels is for the small budget. The features listed with the OPTIc-PRO are not included in the basic system but it can be upgraded with all the PRO features. OPTIc-PRO The professional photo finish system that leaves nothing to be desired. The following features are integrated: high-speed recording: up to 0,000 fps high resolution:,016 pixels vertical resolution (48 % more than OPTIc) extremlux: various technologies for image improvement under bad light conditions motion detection: automatic recording with motion detection integrated WTN: wireless impulse- and data-transmission high-speed camera: It is possible to record 100 images per second in -D mode with 1,04 x 68 or 60 x,016 pixels. The proven IDCam software is available for this function. VoIP: Voice over IP allows communication with the starter without the need for the PC operator to use a headset. Connections x start input (banana socket) 1 x finish input (banana socket) x DIN socket ( input channels) 1 x display board RS (banana socket) 1 x display board RS48 (banana socket) 1 x motor zoom 1 x gear head x USB (e. g. for WLAN) 1 x RJ4 (Gigabit Ethernet) 1 x power supply ( 1.4 VDC)

6 min. sec. 1/100 ichtathletik Photo Finish System with False Start System 1 HS- e-start SU 4 WTN-PB WS + Timy W 6 RLSc Display Board Time 8 IDCam Stadium Cabling 10 OPTIc 11 PC-Headset 1 Switch 1 Notebook OPTIc 14 Notebook IDCam 1 SJ 16 Display Board Wind False Start System Timing Room

7 Photo Finish System with False Start System hletik The system shown on the left incorporates the photo finish system of the basic equipment with some extensions. The Start Judge SJ is used for the false start control. Moreover, the finish monitoring system IDCam is added. With this, it is possible to monitor the finish line with a highdefinition video and use it for instance to read the start numbers during distance events. A display board is added to the wind gauge. Contains photo finish system and the following products IDCam finish monitoring from front with highdefinition video image. This can be used to read the start numbers at the finish. Start Judge System SJ false start system in transport cart for storing controller and BANG, with integrated loud speaker system (see detailed description) D-LINE numerical LED display board for showing the wind velocity with digits Start Judge SJ The Start Judge SJ is a false start system for track & field to monitor the start of running competitions up to 400 m. It consists of the Start Judge transport cart SJT with integrated controller and battery. The transport cart can store the complete system. The sensors SJS are mounted on each starting block. The integrated loud speaker system enables the starter to give commands to the athletes. The start tone (simulated start shot) is released through the speaker integrated in the start sensor and the BANG. By this, all runners can hear the start tone at the same time. With a radio push button WTN-PB one can move around and still trigger a false start at any time. Cable Version SJ-C: This system requires a cable (KT1-0) from the Start Judge transport cart to the first sensor SJS (first starting block). Thesensors of the further lanes are one after another connected with cables 1-1. With the Start Unit SU and the connected e-start and HS-, the starter can communicate with the timing room or give starting commands. Radio Version SJ-W: This system is wireless, i. e. all components communicate via radio. For this radio communication, the WTN radio system is used. Oral commands for the athletes are made through the headset BANG-HS and released via the BANG. Also the start signal is send by radio to the timing system.

8 hletik Start Judge SJ Cable Version SJ-C 8 Radio Version SJ-W Loud Speaker System BANG 80 W loud speaker system and amplifier in one casing, integrated in the Start Judge Cart SJT Electronic Start Device e-start * for triggering the start signal with integrated flash light and connection cable for the Start Unit SU Start Judge Sensor SJS sensor for each lane, mounted at the starting blocks 8 Headset HS- * for the communication between starter and timing room or start commands to the athletes through the loud speaker system BANG 4 6 * only for cable version ** only for radio version Starting Block STAMA IAAF-certified starting block for each lane Radio Push Button WTN-PB for triggering a false start by the starter assistant Start Unit SU * start device with integrated speech amplifier Cable 1-0 serves as connection from Start Judge cart to Start Unit SU Cable Reel KT1-0 * with connection cable (0 m) between Start Judge and false start sensor SJS of the next lane Cable Reel KT10H * with -pole connection cable (10 m) to timing Electronic Start Device e-start W ** for triggering the start signal with integrated flash light, battery and radio system WTN Radio Microphone BANG-HS ** head band with radio microphone for communication through the BANG 8

9 Leichtathletik IDCam T he IDCam is a reliable and simple way to monitor the finish line. When an athlete crosses the finish line, a series of high resolution pictures is taken and stored on the PC with the time of the day for each image. The IDCam can be connected to an timing device. The photocell at the finish line starts the image recording of the IDCam. The images are automatically sorted with the correct ID-number if the number was entered in the timing device in advance. The time before and after each impulse can be adjusted. The recorded images help determine the arrival order of the athletes at the finish line, correct the missing finish line arrivals and add the bib numbers which can be read from the pictures. The IDCAM is the ideal addition to any timing device. number of images: picture resolution: connections: up to 0 frames per second, x 1,44 Pixel ( MP) camera IDCam to PC: Ethernet CAT cable up to 100 m timing device with PC: RS or USB recording time: unlimited, depends on storing capacity of PC hard drive PC operating system: Windows Vista,, 8 oder 10 power supply: POE: 0-80 VAC Examples for Collaboration of IDCam and Photo Finish OPTIc at Track & Field Events Photo Finish Image from OPTIc-PRO The participant with start number 180 (side number 6) cannot be identified in the photo finish image. In the picture of the IDCam the start number 180 and side number 6 are clearly identifiable. Finish Image from IDCam (complete picture)

10 min. sec. 1/100 min. sec. 1/100 min. sec. 1/100 min. sec. 1/100 ichtathletik Complete System 1 HS- e-start SU 4 WTN-PB WS + TIMY W 6 RLSc Display Board Time 8 IDCam Stadium Cabling 10 OPTIc 11 PC-Headset 1 PoE 1 Switch 14 Notebook OPTIc 1 Notebook IDCam 16 Start Judge SJ 1 Display Board Wind 18 PC Evaluation 1 Direction Video Wall 0 TV Broadcasts 1 Printer Infield PC Distance Measurement 4 Concentration Clock Video Controller 6 Infield Display Boards CIS-Server 8 CIS-Clients Live Speaker 0 Videowall False Start System Race Office Timing Room Infield System Commentators Stadium Speaker

11 Complete System hletik This system contains the complete equipment for a track & field stadium including all infield devices. Based on evaluation software all track & field disciplines can be executed, athletes and spectators can follow the competitions on the wide range of information displays. In addition to the numerous accessories like distance measuring device, lap counter and concentration clock, the system includes infield display boards, a video wall and an information system for commentators (CIS = Commentator Information System). Contains Photo Finish System with False Start System and the following products Infield Station The infield stations are required for the technical disciplines like long jump, high jump, javelin etc. They are configured differently according to the discipline. They can contain distance measuring devices, wind gauges, concentration clock 4 and infield display boards 6. Display Boards display boards for time, concentration clock 4, wind gauge Power over Ethernet PoE power supply for camera via network cable Evaluation Software This is software that can be extended step by step for the necessary requirements of a track & field event. The basic module is responsible for the execution of the event 18. It contains the software for the race office and call room, for data transfer from timing and infield as well as connection to infield stations. In further steps, the software can be extended for major events so that for example the stadium speaker 8 has all important pieces of information or a video wall 0 can show start or result lists or for the TV broadcasts 0. 11

12 hletik Display Systems offers a large range of display boards. They differ not only in size but also in their technology. For a track & field event, display boards of the most different applications are required. Display Board Time (e. g. D-LINE0-O-6-E0) The running time and run time of the winner is shown. Mostly, it is a numerical display board with 6 red LED figures. Their heights of 1, or 4 cm are well established (on request other figure heights are available). Display Board Wind (e. g. D-LINE10-O--E0) The wind velocity is shown. Mostly, it is a numerical display board with red LED figures. Their heights of 1 or cm are well established (on request other figure heights are available). Lap Counter The number of laps is shown. Generally, it is a numerical display board with red LED figures per side. There are one-sided, two-sided and three-sided displays. The figure heights of 1 or cm are well established. Concentration Clock (e. g. D-LINE10-O--E0 with Timy W) The elapsing time is shown that an athlete has for the try with technical disciplines. The countdown can easily be adjusted with the terminal Timy during each competition. It is a numerical display board with red LED figures. The figure heights of 1 or cm are well established. Infield Display Board For the selection of the correct infield display board, mainly the field of view of the spectators is of importance. The display board must not block the view. has a large variety of different infield display versions with red LED matrix displays or complete full color video walls. The best flexibility is reached with single display boards that are placed double or three-sided. In this case, the display boards can for example also be used for advertising purposes with graphics and animations. As an option for infield display boards, a turntable cart for one- or two-sided display boards is available. For controlling the infield display board, a PC with the MeetManager software is connected to the network. The software can also read data from other devices, e. g. distance measuring device or wind gauge. Video Wall can offer video walls of all sizes with different resolutions for stadiums. Together with evaluation software, start lists, result lists or live TV broadcasts can be shown. 1

13 Distance Measuring Device / Stadium Cabling hletik Distance Measuring Device The different models of distance measuring devices differ mainly in their prism search. This search has to be adjusted manually at simple theodolites in order to subsequently calculate the distance in the computer supported InfliedClient. More comfortable theodolite models search the prism independently at the touch of a button and show the distance on the display of the device. All theodolite models offered by have an RS interface to transmit the measured distances or heights to the connected InfieldClient. How do theodolites with automatic prism search operate? For devices with automatic search mode, the view finder rotates around the stationary axis and sends a vertical scanning laser beam. If the prism is found, the rotary search movement stops, and the prism is automatically scanned. The theodolite is pivoted in the direction of the prism, and upon pressing the push button, the distance or height is automatically displayed after a short time. Software is available for the following disciplines: discus shot put hammer throw javelin Stadium Cabling For the timing in stadiums, offers cabling for fixed as well as for mobile installations. long jump triple jump high jump pole vault Depending on the local circumstances, the ideal solution can be chosen. Fixed Installation The cables are installed permanently and a distributor is fixed into cable manholes. This cabling has the advantage that it can be used any time without effort. Mobile Installation The cables are on cable reels and the distributors are integrated in the cable reel. A cable reel can be connected to another one and thus there is no problem to build an infrastructure for the timing in the complete stadium. The mobile stadium installation is employed if the timing is used in different stadiums or if due to a high groundwater level the manholes in the stadium are continuously flooded. 1 1 distributor in finish house TB F (fixed) or TBM-F1 (mobile) distributor for timing TB A+E (fixed) or TBM A-D (mobile) distributor wind TB W (fixed) 1

14 min. sec. 1/100 min. sec. 1/100 hletik Halls Competitions in halls require a different system layout than those in stadiums as the layout of the lanes is different. So, two finish systems are needed for both finish lines (round course and center sprint lane). These systems are based on the basic equipment as described on page and. 8 Timing System HS- e-start SU 4 BANG CW WTN-PB 6 RLSc Display Board Time 8 OPTIc Notebook OPTIc 10 Switch 11 Printer 14

15 WTN-Trainings-Set / FunTrainer hletik WTN-Training-Set This is a complete radio timing system with timing device and two photocells. It is simple to set up and for all purposes. Advantages of the WTN training set new innovative radio system simple handling compact measurements, proven robustness simple setup of system Timy with extensive timing software highest timing precision with temperature compensated quartz (measuring to 1/10,000 seconds) fully featured timing device, can also be used for timing races speed measuring possible (km/h, m/s or mph) integrated USB interface in timing device Sprint times, lap times or the speed can be measured. photocell with integrated radio up to different timing channels at photocell extension of system with further photocells or impulse device possible complete system is battery supplied (battery runtime about hours) 1 different radio frequencies devices are for outdoor use stable case with foam insert for easy and safe transport Two WTN-Training-Sets are available The difference between set 1 and is the integrated printer in the timing device of set. WTN-Set 1 includes 1 x timing device Timy W with alkaline batteries x photocell PR1aW x reflector Ref-L 4 x tripod TRI-S 1 x case for complete system WTN-Set includes 1 x timing devices Timy WP with rechargeable battery and charger x photocell PR1aW x reflector Ref-L 4 x tripod TRI-S 1 x case for complete system FunTrainer The FunTrainer is a simple training system with a wireless button: perfect for training applications in the stadium. The runner can trigger the start by himself by starting a countdown. With each lap he can see his time and when crossing the finish line, the time can be stopped by pressing the button. The system contains a display board (figure height 8 cm reading distance about 40 m), large radio push button, tripod for the display board and transport case. 1

16 Rotkreuzstraße 680 Lustenau, Austria Printing errors, mistakes, and modifications reserved. All rights reserved.