ECLIPSE C3 ALUMINUM FOLDING DOOR SYSTEM. Exterior Folding Door Systems

Transcription

1 Exterior Folding Door Systems ECLIE C3 ALUMINUM FOLDING DOOR SYSTEM Tomorrow s Innovative Solutions for Today s Doors & Windows The DS Group Of Companies: Draftseal, KrisTrack, Eclipse Architectural & DSD Hardware Eclipse C3 Aluminum Folding Door System, Full Line Catalogue Revision (16) March 2, 2017 PRINTED CATALOGUE MAY NOT BE UP TO DATE, ALWAYS REFER TO PRODUCT WEBSITE FOR MOST UP TO DATE CONTENT.

2 INDEX Introduction & Weight/Size Specs 2 Fabricator/Assembler Program 3 Top 10 Features - C3 System 4 C3 Cross Section 5 Door Configurations 6-7 C3 Aluminum Profiles 8-10 C3 Panel (Corner Assembly) 11 C3 Mid Rail C3 Panel to Panel Details & Glazing Details C3 Panel to Jamb Details 16 C3 Panel to Sill & Head Details 17 Top 6 Features - Multi-point Door Locks C3 Twinpoint 20 C3 Lever Lock Sets 21 E3COM Hardware Finishes & Surelock 22 C3 Stock & Custom Finishes 23 C3 Parts Selection (Misc.) E3COM Hardware Selection C3 Test Performance back cover Eclipse C3 Aluminum Folding Door System (Not thermally broken) REVOLUTIONIZING THE FOLDING DOOR INDUSTRY The Concept» Research and develop a universal exterior folding door system that can be fabricated by selected partners in the door and window industry. The Delivery» Eclipse Architectural recognized the need for a complete exterior folding door system, as a result, we are the first company in North America to produce and offer the Eclipse C3 Aluminum Folding Door System, filling an important gap for the door and window industry. The Fabricator/Assembler Programs» How to become a fabricator and/or assembler for the C3 System: please refer to page 2 of this catalogue for details. SPECIFICATIONS C3 Exterior aluminum folding door system (not thermally broken) with E3C Eclipse Architectural hardware In a single direction: maximum panel weight: 220 lbs (100 kg) each panel minimum panel width: 24 (609mm) maximum panel width: 39 (990 mm) minimum panel height: 79 (2007mm) (for doors) minimum panel height: 32 (812mm) (for windows) maximum panel height: 144 (3657mm) C3 door thickness: 2-1/4 (57.15mm) Maximum # of Doors: 8 each way = 16 panels = 52 ft (15.8m) total. NOTE: When using maximum panel width & height 39 x 144 (990mm to 3657mm) panel may exceed maximum panel weight of 220 lbs (100 kg). Calculated weight check should be done to ensure you have not exceeded maximum weight listed above. C3 Extrusions: Extruded Aluminum 6063-T5. C3 Extrusion Finishes: 1. Standard Finishes: clear & bronze anodized. 2. Standard mill finish available for custom colors from Eclipse. 3. Custom powder coat finishes available D3000-AAMA 2605 (10 year Florida) 20 year MFG s warranty. Call for manufacturing time. 4. Custom wood grain finishes: AAMA 2604 (5 year Florida) 10 year MFG s warranty. Call for manufacturing time. E3COM Hardware: Stainless steel (304SS) components with aluminum hinges. C3 Twinpoint Har dware: Stainless steel (304SS) & aluminum components. C3 Lever Lock Sets: F-2 Sets powder coat over brass. DSD Multi-point Door Locks: Faceplate, latch and hooks are 304SS. ECLIE WARRANTY The Eclipse program is a complete product offering. Component deletions and/or substitutions are strictly prohibited. Warranty is void if system has missing or substitute products. Please refer to for our full warranty information, terms & conditions, returns & allowances, claims policy, and other general information. 2 Copyright 2017 DS Group & Eclipse Architectural

3 FABRICATOR / ASSEMBLER PROGRAM How to become a Fabricator and/or Assembler for the Eclipse Aluminum Exterior Folding Door System: Qualifying Are you currently building commercial aluminum store front or curtain wall? Then you do qualify to fabricate the Eclipse Folding Door System. Wood door shops and PVC door & window manufacturers may also qualify. Benefits: Purchase all components as required No start-up or die costs when you purchase the KD program No need to cut 15 to 20 dies for all the profiles No need to put precious capital into heavy inventory R&D and engineering of system is already complete System has been tested for air, water & structural Complete fabrication & assembly details supplied Eclipse C3 door Calculator (online) at The C3 Program is a complete product offering. Component deletions and/or substitutions is strictly prohibited. If substitutions are made without our knowledge and consent, warranty on all C3 components is null & void. 2 Programs Available: Fabricator And/Or Assembler 1 Lineal Program for Fabricators (Stocking or per job basis) Purchase all profiles in stock lengths (5 standard finishes, except for sills [2 finishes]). You will require machinery to cut and prep all profiles for E3C hardware, C3 Twinpoint and C3-MK2 Multi-point door locks. Fabrication and assembly details supplied by Eclipse Architectural. WE SUPPLY: All aluminum profiles (stock lengths) E3C Folding Door Hardware C3 Twinpoint handle set (304SS) + top & bottom door stile caps C3-MK2 Multi-point locks & adjustable strike plates (304SS) C3 lever lock set All weatherseals & gaskets All glazing gasketing All screws, nuts, bolts & corner keys YOU SUPPLY: Glass IG or SG & your labour 2 KD Program for Assemblers custom made for you Purchase all profiles cut and prepared to your specific configuration, outside frame dimension or panel size. No fabrication required in your shop, just easy assembly based on our instruction manual. WE SUPPLY: Same as above, in addition, all profiles are cut & prepared for easy assembly & mounting of all hardware YOU SUPPLY: Glass IG or SG & your labour Copyright 2017 DS Group & Eclipse Architectural 3

4 TOP 10 COOL CUSTOM FEATURES OF OUR FOLDING DOOR SYSTEM top pivot door panel corner key intermediate carrier 3 B hinge aluminum & glass max. weight 176 lb (80kg) per panel C3 multi-point astragal wall pivot C top pivot hinge with handle 10 active door bottom pivot 2 wall pivot hinge twinpoint concealed intermediate guide 8 C3 hinge gasket weatherseals 1L3R A lever lock set active lock set bottom pivot Multi-point Door Lock (3 hooks) + top & bottom shootbolts = 5 point 3 Hook Model for door heights of up to 95-15/16 (2437 mm) 4 Hook Model for door heights of 96 (2438.4mm) or over. A B C Lever Lock Set Carrier & Hinge Twinpoint Handle A, B & C available in white, satin, black & bronze powder coat finishes. 1. New state of the art Twinpoint hardware in stainless steel (304SS) 2. Five point or six point MK2 Multi-point door lock (304SS) 3. New E3C Folding door hardware by Centor 4. Colour coordinated lever lock sets for active & adjoining panels 5. All extruded aluminum profiles specific to the C3 Folding Door System 6. All Aluminum Profiles are available in 2 standard anodized finishes 7. All Aluminum Profiles are available in powder coat finishes (custom) 8. Door panels designed to hold S.G., I.G. or H.G. 9. Door panel corner key makes for easy assembly 10. Dual weatherseals on head, jamb, sill & between each panel 2 Standard Frame & Door Panel Finishes: clear anodized bronze anodized Custom finishes available on our website: Call for manufacturing time. 19 Custom Wood Grain finishes available (not shown) 31 Solid Colors: Custom powder coat finishes available (not shown) 18 Metallic Custom Powder coat finishes available (not shown) PLEASE NOTE: For technical reasons associated with color reproduction, the colors shown on this brochure give only an indication of color & finish. No warranty or guarantee can be given that they will exactly match the product as supplied. 4 Copyright 2017 DS Group & Eclipse Architectural

5 C3 CROSS SECTION Outswing (System Tested 3L1R) (Not thermally broken) Inswing 4-1/2 (114mm) 1 (25.4mm) 5/64 (2mm) 4-1/2 (114mm) 1-7/8 (48mm) 1-7/8 (48mm) 5/64 (2mm) 1 (25.4mm) 2-13/32 (61mm) 5/64 (2mm) 13/64 (5mm) 3-13/32 (87mm) 1-7/32 (31mm) 3-13/32 (87mm) 1-7/32 (31mm) 5/64 (2mm) 13/64 (5mm) 2-13/32 (61mm) 19/32 (15mm) (5mm) (5mm) 19/32 (15mm) T astragal or MP astragal T astragal or MP astragal 23/32 (18.5mm) 23/32 (18.5mm) 25/64 (10mm) 19/32 (15mm) 1-5/32 (29mm) weep holes 13/64 (5mm) 25/64 (10mm) Pile A/B seal applied to top and bottom of astragal 9/32 (7mm) 23/32 (18mm) (5mm) 1 2-1/4 (25.4mm) (57mm) Pile A/B seal applied to top and bottom of astragal (5mm) 9/32 (7mm) 23/32 (18mm) 2-1/4 1 (57mm) (25.4mm) weep holes 25/64 (10mm) 13/64 (5mm) 19/32 (15mm) 1-5/32 (29mm) 25/64 (10mm) Copyright 2017 DS Group & Eclipse Architectural 5

6 C3 HARDWARE LIST FOR DOOR CONFIGURATIONS Multi-point/lever set, twinpoint, astragal & hardware placement for outswing applications From left to right 6L RCS RCS LS M LS M ESP RCS RCS LCS Not accessible from exterior. ESP RCS LCS LS M TB TB TB Not accessible from exterior. RCS Not accessible from exterior. 1x E3COM middle wall pivot 1x E3COMC pivot set 1x E3COMCRCS right carrier set 1x E3COM hinge set 1x EC3OM twin point 2x E3COM middle wall pivot 2x E3COMC pivot set 1x E3COMCRCS right carrier set 1x E3COM hinge set 1x EC3OM twin point 1x E3COM middle wall pivot 1x E3COMC pivot set 1x E3COMC intermediate carrier set 1x E3COM half offset hinge set 1x EC3OM twin point 2x E3COM middle wall pivot 2x E3COMC pivot set 1x E3COMC intermediate carrier set 1x E3COM half offset hinge set 1x EC3OM twin point 1x E3COM middle wall pivot 1x E3COMC pivot set 1x E3COMC intermediate carrier set 1x E3COMCRCS right carrier set 2x E3COM half offset hinge set 2x EC3OM twin point 2x E3COM middle wall pivot 2x E3COMC pivot set 1x E3COMC intermediate carrier set 1x E3COMCRCS right carrier set 2x E3COM half offset hinge set 2x E3COM twin point 2x E3COM middle wall pivot 2x E3COMC pivot set 1x E3COMC intermediate carrier set 1x E3COMCLCS left carrier set 1x E3COM hinge set 1x E3COM half offset hinge set 2x EC3OM twin point 1x E3COM middle wall pivot 1x E3COMC pivot set 2x E3COMC intermediate carrier set 1x E3COM hinge set 1x E3COM half offset hinge set 2x EC3OM twin point 2x E3COM middle wall pivot 2x E3COMC pivot set 2x E3COMC intermediate carrier set 2x E3COM half offset hinge set 2x EC3OM twin point ESP 1x E3COM middle wall pivot 1x E3COMC pivot set 3x E3COMC intermediate carrier set 2x E3COM hinge set 1x E3COM half offset hinge set 3x EC3OM twin point 2x E3COM middle wall pivot 2x E3COMC pivot set 2x E3COMC intermediate carrier set 1x E3COMCRCS right carrier set 3x E3COM half offset hinge set 3x EC3OM twin point 2x E3COM middle wall pivot 2x E3COMC pivot set 2x E3COMC intermediate carrier set 1x E3COMCLCS left carrier set 2x E3COM hinge set 1x E3COM half offset hinge set 3x EC3OM twin point 2x E3COM middle wall pivot 2x E3COMC pivot set 3x E3COMC intermediate carrier set 1x E3COM hinge set 2x E3COM half offset hinge set 3x EC3OM twin point 1x E3COM middle wall pivot 1x E3COMC pivot set 2x E3COMC intermediate carrier set 1x E3COMCRCS right carrier set 1x E3COM hinge set 2x E3COM half offset hinge set 3x EC3OM twin point Hardware Legend Pivot Set Wall Pivot Set Intermediate Carrier Set LCS Left Carrier Set RCS Right Carrier Set Half Offset Hinge Set Hinge Set (Flat) Twinpoint ESP Extended Strike Plate (Jamb) Door Hold MAG Magnet Multipoint Lock M Multipoint Shootbolts Lever Lock Set (Active) LS Lever Set (Inactive) Floating Door Pairs Per pair of doors: 1x E3COMCLCS Left Carrier Set 1x E3COMCRCS Right Carrier Set 1x E3COM Hinge Set 1x E3COM Twin Point Adjustable Strike Plates Panel to Panel Strike RH LH DSSPLK730-60RH DSSPLK729-60LH DSSPLK654 adjustable hook strike for panel to panel or jamb How To Determine Swing Of Systems Configuration is always determined when viewing system from exterior side, going from left to right. 3L OUTSWING 3LI INSWING 3L outswing application D pull handle option Use D pull handle on exit door (outswing system) where passage set / lock not required. Use flushbolts top and bottom to lock door from the inside only. Note: exit door not accessible from exterior. 5RI Legend Multipoint Lock & Lever Lock Set Twinpoint Top & Bottom Door Hold Inswing application D pull handle option Use one D pull handle on each pair of inswing doors to pull open and close doors. Multipoint Astragal Extended Jamb Strike RH LH DSSPLK732-60RH DSSPLK731-60LH 6 Copyright 2017 DS Group & Eclipse Architectural

7 C3 HARDWARE LIST FOR DOOR CONFIGURATIONS Multi-point/lever set, twinpoint, astragal & hardware placement for outswing applications From left to right not accessible from exterior. LCS ESP 3L2R Hardware Application LCS not accessible from exterior. ESP ESP LCS LCS not accessible from exterior. RCS LS M LCS RCS RCS LCS not accessible from exterior. LCS intermediate carrier & guide set pivot set basic jamb door door service door flushbolts door hold passage set half offset hinge set 1x E3COM middle wall pivot 1x E3COMC pivot set 1x E3COMCLCS left carrier set 1x E3COM hinge set 1x EC3OM twin point 2x E3COM middle wall pivot 2x E3COMC pivot set 1x E3COMCLCS left carrier set 1x E3COM hinge set 1x EC3OM twin point 1x E3COM middle wall pivot 1x E3COMC pivot set 1x E3COMC intermediate carrier set 1x E3COM half offset hinge set 1x EC3OM twin point 2x E3COM middle wall pivot 2x E3COMC pivot set 1x E3COMC intermediate carrier set 1x E3COM half offset hinge set 1x EC3OM twin point 2x E3COM middle wall pivot 2x E3COMC pivot set 1x E3COMCLCS left carrier set 1x E3COMCRCS right carrier set 2x E3COM hinge set 2x EC3OM twin point 2x E3COM middle wall pivot 2x E3COMC pivot set 1x E3COMC intermediate carrier set 1x E3COMCLCS left carrier set 2x E3COM half offset hinge set 2x EC3OM twin point 1x E3COM middle wall pivot 1x E3COMC pivot set 1x E3COMC intermediate carrier set 1x E3COMCLCS left carrier set 2x E3COM half offset hinge set 2x EC3OM twin point 2x E3COM middle wall pivot 2x E3COMC pivot set 1x E3COMC intermediate carrier set 1x E3COMCRCS right carrier set 1x E3COM hinge set 1x E3COM half offset hinge set 2x EC3OM twin point 1x E3COM middle wall pivot 1x E3COMC pivot set 2x E3COMC intermediate carrier set 1x E3COM hinge set 1x E3COM half offset hinge set 2x EC3OM twin point 2x E3COM middle wall pivot 2x E3COMC pivot set 2x E3COMC intermediate carrier set 1x E3COMCLCS left carrier set 3x E3COM half offset hinge set 3x EC3OM twin point 1x E3COM middle wall pivot 1x E3COMC pivot set 3x E3COMC intermediate carrier set 2x E3COM hinge set 1x E3COM half offset hinge set 3x EC3OM twin point 2x E3COM middle wall pivot 2x E3COMC pivot set 2x E3COMC intermediate carrier set 1x E3COMCRCS right carrier set 2x E3COM hinge set 1x E3COM half offset hinge set 3x EC3OM twin point 1x E3COM middle wall pivot 1x E3COMC pivot set 3x E3COMC intermediate carrier set 1x E3COMCLCS left carrier set 2x E3COM hinge set 2x E3COM half offset hinge set 4x EC3OM twin point left carrier & guide set pivot set leading jamb door door flushbolts flat hinge set Hardware Legend Pivot set Wall pivot set Intermediate carrier set LCS Left carrier set RCS Right carrier set Half offset hinge set Hinge set (flat) Twinpoint ESP Extended strike plate (jamb) Door hold MAG Magnet Multipoint lock M Multipoint shootbolts Lever lock set (active) LS Lever set (inactive) adjustable strike plates extended jamb strike RH LH panel to panel strike RH LH LS M Legend multipoint lock & lever lock set twinpoint top & bottom door hold multipoint astragal Single panel & double panel configuration 1L 1R 1L1R INSIDE OUTSIDE INSIDE OUTSIDE INSIDE OUTSIDE Copyright 2017 DS Group & Eclipse Architectural 7

8 C3 SYSTEM COMPONENTS (Examples on this page shown as outswing application) EC3HEAD C3 top track / header 4-1/2 (114mm) EC3FRAMESCREW (#10 x 2 SS) Frame assembly fastener 3-13/32 (86.7mm) Head & Jamb: available in 5 finishes: Clear, bronze & black anodized, white powder coat & mill finish. EC3JAMB C3 jamb 1-29/32 48mm 4-1/2 (114mm) EC3SILL C3 sill PVC channel Insert 2-17/64 (57.61mm) 61/64 24mm weep holes 1-5/32 (29mm) 4-1/2 (114mm) Sill Available in 2 finishes: clear & bronze anodized. Mill finish available as custom colour. 8 FULL SCALE EXCEPT AS NOTED Copyright 2017 DS Group & Eclipse Architectural

9 C3 SYSTEM COMPONENTS (Examples on this page shown as outswing application) Door Stiles 9/ mm 5/8 15.6mm NON-HANDED EC3CSTILE C3 common door stile 3-17/32 89mm SIDE EC3MTILE C3 multi-point/beveled door stile 3-17/32 89mm EC3REDUCER14G C3 glass adapter (reducer) This glass adapter bar is used on all stiles & rails for S.G. hurricane (14mm glass) 9/16 Adapter bars (14G & 6G) available in: Mill finish, Clear and Bronze anodized only. 23/ mm 5/8 15.6mm 2-1/4 58mm 2-1/4 58mm EC3REDUCER6G C3 glass adapter (reducer) This glass adapter bar is used on all stiles & rails for S.G. (6mm glass) 1/4 EC3RESTILE C3 recessed door stile 3-11/16 93mm EC3RAIL C3 top and bottom rail 3-17/32 90mm 5/16 8mm SIDE 2-1/4 58mm SIDE 2-5/32 55mm Door Stiles, Rail & Snap Bead are available in 2 finishes: clear & bronze anodized. Mill finish available as custom colour. 1-9/64 29mm EC3SBEAD C3 snap in bead stop for top & bottom rail This snap in bead is used on top and bottom rail for all glass thicknesses. Copyright 2017 DS Group & Eclipse Architectural FULL SCALE EXCEPT AS NOTED 9

10 C3 SYSTEM COMPONENTS Low Rise Threshold 1/ mm finished floor line blockout for channel depth EC3ADASILL C3 low rise ADA threshold Available in clear & bronze anodized only 4-1/2 (114mm) 1-3/4 (44mm) 29/32 (23mm) 7/16 (11mm) finished floor line poly insert aluminum channel 7/8" 22mm 15/16" 24mm KT23CV & KT23DV C3 floor channel with PVC channel insert Available in clear & bronze anodized only EC3B1070LAK Plastic shootbolt cup for Twinpoint lock (Required when using floor channel) KT23BLVE Replacement insert for C3 sills & floor channel Available in black only Astragals 1-1/2 38mm 1-31/32 50mm 1-1/16 27mm EC3MCREW Fastening point (#8 x 32 x 1-1/2 EC3TASTRAGAL C3 T-astragal stainless steel) Available in 5 finishes: clear, bronze & black anodized, white powder coat & mill finish. 3/8 (9.5mm) 1-1/2 (38mm) DS672DW White pile with adhesive for top & bottom of astragals DS672DBL Black pile with adhesive for top & bottom of astragals Placement of pile weatherseal at top & bottom of astragal 1/2 (12.7mm) EC3MCREW Fastener for attaching astragal to stile (#8 x 32 x 1-1/2 Stainless Steel) two fastening points of astragal to stile EC3MPASTRAGAL C3 (MP) Multi-point astragal for C3 multi-point door stile DS672DW DS672DBL 2 (50.8mm) White pile with adhesive for top & bottom of astragals Black pile with adhesive for top & bottom of astragals 2-13/16 71mm Placement of pile weatherseal at top & bottom of astragal 10 FULL SCALE EXCEPT AS NOTED Copyright 2017 DS Group & Eclipse Architectural

11 C3 PANEL CORNER ASSEMBLY EC3PANELSCREW Assembly screws (#10 x 2 Stainless Steel) Also used on frame assembly EC3CORNERKEY12M Connector corner key (stock length: 144 [3657mm]) EC3CKEYCUT2 (pre-cut & pre-drilled for corner assembly 2 [50.8mm]) Available in mill finish only. EC3CKEYPACK4 consisting of the following for one panel: 4 Corner Keys 8 Flanged Bolts 8 Flanged Nuts 16 Panel Corner Screws EC3RAIL Top & bottom rail EC3FBOLTM8X1.25 Assembly bolt stainless steel flanged bolt (5/16 x 1-1/4 [31mm] length) EC3FNUTM8X1.25 Assembly nut stainless steel flanged nut (5/16 [8mm] diameter) 2-9/16 65mm 1-3/8 34.9mm EC3CORNERKEY12M (stock length: 144 [3657mm]) EC3CKEYCUT2 (pre-cut & pre-drilled for corner assembly 2 [50.8mm]) EC3CSTILE Stile NOTE: Drawing above reflects assembly of all C3 Panel Corners. Copyright 2017 DS Group & Eclipse Architectural FULL SCALE EXCEPT AS NOTED 11

12 C3 SYSTEM COMPONENTS: MID RAIL Mid rail shown with snap-in bead C3 mid rail panel 3-17/32 (90mm) 2-5/32 (55.15mm) EC3MIDRAIL C3 mid rail 2 (51mm) 2.75 (69.8mm) 1 (26mm) EC3CKEYCUT1MR C3 connector block for C3 mid rail EC3CKEYPACK2MR C3 connector blocks (2 pcs) plus fasteners & plugs (2) 12 FULL SCALE EXCEPT AS NOTED Copyright 2017 DS Group & Eclipse Architectural

13 C3 PANEL & MID RAIL ASSEMBLY plug stile assembly fastener connector block stile snap-in bead mid rail assembly fasteners snap-in bead assembly fasteners connector block assembly fastener plug Copyright 2017 DS Group & Eclipse Architectural 13

14 C3 PANEL TO PANEL DETAILS (HORIZONTAL) Examples on this page shown as outswing application Panel to Panel Detail with Offset Hinge offset hinge () TOP VIEW I.E. INSIDE 4L OUTSIDE EC3GGASKETINT EC3GGASKETEXT RCS Not accessible from exterior. offset hinge () common door stile 11/64 (4.5mm) glazing block by other KT423 panel to panel weatherseal gasket common door stile Panel to Panel Detail with Flat Hinge flat hinge () TOP VIEW I.E. 2L1R INSIDE OUTSIDE RCS flat hinge () common door stile glazing block by other common door stile 11/64 (4.5mm) Glazing Details I.G. (Insulated Glass) 3/16 4.0mm 5/8 15.8mm 3/16 4.0mm H.G. (Hurricane Glass) mm 1/4 6.0mm 1/4 6.0mm Interlay 15/16 24mm Interlay 9/ mm common door stile Glazing blocks by other common door stile Glazing block by other top & bottom rail EC3REDUCER14G HURRICANE GLASS= 7.1 LBS / FT² top & bottom rail S.G. (Single Glazing) 1/4 6.4mm EC3REDUCER6G common door stile 1/4 6.4mm Glazing blocks by other top & bottom rail 14 HALF SCALE EXCEPT AS NOTED Copyright 2017 DS Group & Eclipse Architectural

15 C3 PANEL TO PANEL DETAILS (HORIZONTAL) Examples on this page shown as outswing application Panel to Panel Detail with Left & Right Carrier I.E. 2L2R INSIDE OUTSIDE RCS LCS Not accessible from exterior. astragal TOP VIEW KT426 Kerf inserted weatherseal gasket glazing block by other glazing block by other recessed door stile right carrier & hinge 15/32 (12mm) recessed door stile EC3AP500BL Bulb weatherseal black EC3AP500W Bulb weatherseal white left carrier & hinge Panel to Panel Detail with Right Carrier & Astragal I.E. 2L1R INSIDE OUTSIDE RCS astragal TOP VIEW escutcheon plate Multi-point Lockbox recessed door stile right carrier & hinge beveled door stile DSP Pile weatherseal, grey strike plate 13/64 (5mm) Panel to Panel Detail, Inactive & Active with Shootpoints & Multi-point I.E. 3L1R INSIDE OUTSIDE LS M TOP VIEW inactive panel Shootpoint Lockbox active panel Multi-point Lockbox beveled door stile multi-point astragal beveled door stile strike plate 9/32 (7mm) Copyright 2017 DS Group & Eclipse Architectural HALF SCALE EXCEPT AS NOTED 15

16 C3 PANEL TO JAMB DETAILS (HORIZONTAL) Examples on this page shown as outswing application Panel to Jamb Detail I.E. 4L INSIDE OUTSIDE RCS Not accessible from exterior. TOP VIEW recessed door stile EC3AP500BL bulb weatherseal, black EC3AP500W bulb weatherseal, white right hand carrier & hinge 33/64 (13mm) Panel to Jamb (Pivot set) I.E. 2L1R INSIDE OUTSIDE RCS TOP VIEW KT423 panel to jamb weatherseal gasket recessed door stile pivot set (top & bottom) 5/32 (4mm) Panel to Jamb (Swing panel) Locking at Jamb I.E. 3L INSIDE OUTSIDE ESP Multi-point Lockbox TOP VIEW DSP pile weatherseal beveled door stile 9/32 (7mm) extended strike plate 16 FULL SCALE EXCEPT AS NOTED Copyright 2017 DS Group & Eclipse Architectural

17 C3 PANEL TO SILL & HEAD DETAILS (VERTICAL) Examples on this page shown as outswing application Cross Section View (Outswing) Panel to Head Detail glazing block by other 3/8 (10mm) 7/8 (22.1mm) finished floor line wood or tile 19/64 (7.4mm) sub floor 11/16 (17.5mm) 7/16 (11.1 mm) DS158 brush sweep glazing block by other Panel to Floor Channel Detail EC3GGASKETEXT glazing gasket EC3GGASKETINT glazing gasket glazing block by other DS158 brush sweep glazing block by other 1/ mm 3/8 (10mm) 19/64 (7.4mm) 11/16 (17.5mm) 7/16 (11mm) finished floor line blockout flooring for sill channel finished floor line Panel to ADA Sill Detail Panel to Sill Detail Copyright 2017 DS Group & Eclipse Architectural HALF SCALE EXCEPT AS NOTED 17

18 TOP 6 COOL CUSTOM FEATURES OF THE MK2 DSD MULTI-POINT DOOR LOCKS 3 and 4 hook models Adjustable Stainless Steel strikers 45mm back set centre cases Single and double door locks 6 8 (2032mm) and 8 (2438mm) product models Easy modification for custom door heights 3L INSIDE OUTSIDE ESP 6 1 Compliant to DP100 hurricane testing (Dade County) Compatible with North American key-way and Euro-cylinder applications Complementary range of Lever Lock Sets in a choice of finishes 10 year mechanical breakdown guarantee on all MK2 Multi-point products 10 year surface finish guarantee on all PVD finish/brass Lever Lock Sets 3 Fasteners for attaching Multi-point to Door Stile are included. EC3MCREW (#8 x 32 x 1-1/2 SS). 2 1 High Security Hooks 304 SS Ensuring even distribution of weatherproofing and strength 4 Opposing Centre Hook 304 SS Optimizes anti-separation security Quick Change Reversible Latch 304 SS Fast and simple handing for Lockmaster 5 Anti-slam Mechanism Prevents accidental operation of the lock when open 3 Grade 304 Stainless Steel Faceplate 6 Shootbolt Extensions Delivering enhanced performance 1 6 This photo portrays a short sample lock made for promotional purposes only. 18 Copyright 2017 DS Group & Eclipse Architectural

19 MK2 MULTI-POINT DOOR LOCKS ANTI-SLAM FEATURE High security hooks (304 SS) DSSPLK654 Adjustable hook strike brushed (304 SS) Adjustable strike plates brushed (304 SS) NOTE: Handing of Strike Plates (RH or LH) are determined by viewing from exterior side. RH LH RH LH DSSPLK730-60RH DSSPLK729-60LH DSSPLK732-60RH DSSPLK731-60LH Panel to panel strike Extended jamb strike 4 hooks model with shootbolts top & bottom stock size 96 (2438mm) DSSPLSP212AS hook model with shootbolts top & bottom stock size 79 (2006mm) DSSPLSP210AS45-60 (Face plate extensions available for door heights of 79-1/6 to 95-15/16 and 96-1/16 +.) multi-point face plates are 304 ss. 3L1R interior exterior inactive shootbolt lock with shootbolts top & bottom 79 (2006mm) DSSPLSP (2438mm) DSSPLSP Determining RH or LH Center Strike RH panel to panel center strike active panel 3L interior exterior EC3CREW (#8 x 32 x 3/4 SS) for fastening strike plates 14 (355mm) DSSPL Face plate extension (304 SS) 6 (150mm) 8 (200mm) LH center jamb strike DSSPLSB Top and bottom shootbolts (304 SS) Top unit 6 150mm length. Bottom unit 8 200mm length (Supplied as a pair) Copyright 2017 DS Group & Eclipse Architectural 19

20 C3 TWINPOINT 4L 3L twinpoint & swing handle twinpoint & swing handle twinpoint & swing handle multi-point & lever lock set Twinpoint assembly is used in securing each pair of folding panels in the closed position. Not used on the swing (active) panel. shootbolt (304 SS) end cap extension rod aluminum extrusion rod attachment C3 Twinpoint Handle and Gear Box (Available in 6 finishes matching C3 hinges and lever lock sets) Complete Twinpoint assembly as shown 96 = Door Height up to 96 (2438mm) 120 = Door Height over 96 (2438mm) and up to 120 (3048mm) For panel height over 120 to 144 longer extension rods are available PRODUCT NUMBER ROD LENGTH & FINISH OF SWING HANDLE rod attachment gearbox (304 SS) gearbox brace handle (304 SS) brushed SS or powder coated EC3TWINPOINT96Q EC3TWINPOINT120Q EC3TWINPOINT96N EC3TWINPOINT120N EC3TWINPOINT96SS EC3TWINPOINT120SS EC3TWINPOINT96OL 96 Bronze Powder Coat Finish 120 Bronze Powder Coat Finish 96 Satin Powder Coat Finish 120 Satin Powder Coat Finish 96 Stainless Steel 304 (Brushed) 120 Stainless Steel 304 (Brushed) 96 PVD Bronze Finish over Stainless Steel EC3TWINPOINT120OL 120 PVD Bronze Finish over Stainless Steel Minimum panel height: 32 (812mm) Maximum panel height: 144 (3657mm) end cap extension rod aluminum extrusion shootbolt (304 SS) Complete C3 Twinpoint Assembly EC3B1070LAK Plastic shootbolt cup for Twinpoint lock (Required when using floor channel) Fastener for attaching cap to stile C3 door stiles with end cap EC3MCREW for C3 Twinpoint EC3LA1C3AK: Twinpoint adaptor kit Kit includes: 2 end caps (glass filled nylon) 1 gear box brace (holder) Fasteners (#8 x 32 x 1-1/2 SS) (One kit required for each Twinpoint unit) 20 Copyright 2017 DS Group & Eclipse Architectural

21 C3 LEVER LOCK SETS C3 FERRARO-2 SERIES 3 finishes available Ferraro back plate 30mm active or inactive sets Satin Powder Coat DSPF SC (active) DSPF SC (inactive) Black Powder Coat DSPF BL (active) DSPF BL (inactive) Bronze Powder Coat DSPF BR (active) DSPF BR (inactive) FLORENCE SERIES (Scrolled) Back plate 44mm active sets FAENZA SERIES (Swept) Back plate 30mm active sets Satin Nickle DSPF (active) Satin Nickle DSPF (active) Bronze Powder Coat DSPF (active) Bronze Powder Coat DSPF (active) PLEASE NOTE: For technical reasons associated with color reproduction, the colors shown on this brochure give only an indication of color & finish. No warranty or guarantee can be given that they will exactly match the product as supplied. Copyright 2017 DS Group & Eclipse Architectural FULL SCALE EXCEPT AS NOTED 21

22 HARDWARE FINISH SELECTION E3C hardware E3C Intermediate Carrier Sets (Shown) 2 finishes available. (C3 hinges only are aluminum) Clear anodized aluminum (satin) Bronze powder coat PLEASE NOTE: For technical reasons associated with color reproduction, the colors shown on this brochure give only an indication of color & finish. No warranty or guarantee can be given that they will exactly match the product as supplied. Surelock Adjustment Surelock carrier pin locking system (patents granted). Carrier pins at the top pivots, intermediate and end carriers support the full door weight and it is here that the height of the panels is adjusted. Surelock ensures that once the heights are set, they stay set. Using Surelock is simple: 1. Surelock is supplied with a plastic shipping clip installed to make initial adjustment very easy. 2. Insert a flat bladed screwdriver into the slot to rotate the pin. 3. When correct adjustment is reached and doors operate well, remove the shipping clip (it s seriously ugly to help you remember). 4. Surelock will automatically snap into place when the blade and slot are aligned. 5. To readjust at a later date, simply pull the blade down to disengage it from the slot and rotate the pin. 22 FULL SCALE EXCEPT AS NOTED Copyright 2017 DS Group & Eclipse Architectural

23 STANDARD STOCK FINISHES FOR C3 ALUMINUM FOLDING DOOR SYSTEM (Frame & Panels) Anodized Finishes CLEAR ANODIZED BRONZE ANODIZED COURSE MATTE ETCH Sulfuric Acid Anodizing (Clear Coatings) Coating thickness to.7 mil Coatings meet or exceed Aluminum Association designations: A21, A31, A41 Color by Electrolytic Deposition (Bronze) Coating thickness to.7 mil Coatings meet or exceed Aluminum Association designations: A24, A34, A44Hardcoat Acid Etch Anodizing Clear Acid Etch is an alternative chemical etching process that produces a superior finish compared to traditional caustic etch anodizing. Acid etching is performed in the pre-treatment cleaning of aluminum profiles, prior to the anodizing process. Acid etch is an improved process that produces better color consistency than traditional caustic etch. Acid etch hides metal imperfections (visual streaks, die lines, light scratches, etc.) while providing a superior uniform matte finish. Also, Acid etch process exceeds AAMA (American Architectural Manufactures Association) specifications. Acid Etch at a glance: Reduces or eliminates: Die lines, surface defects, minor corrosion and scratches Bronze finishes from champagne to black Produces a very matte surface with a gloss rating of 4.0 to 6.0 (typical caustic etch produces a 9.0 to 18 rating) Interpon D2000 High Durability Architectural Solid Color. CUSTOM COLOR, CALL FOR MANUFACTURING TIME WHITE POWDER COAT High durability coatings Interpon D High Durability Finishes are architectural powder coatings especially designed to give outstanding exterior weatherability on buildings around the world. Having all the advantages of powder coatings such as film toughness, cost effectiveness and low environmental impact, Interpon D High Durability Finishes use innovative polymer technology to provide long term cosmetic and functional protection of substances in the most demanding environments. Ultra durable finishes The Interpon D2000 range offers significantly improved gloss retention and enhanced resistance to chalking and fading in comparison to standard architectural powder coatings. All brands and products in this series meet the relevant long term weathering architectural standards such as AAMA 2604 and Qualitycoat Class 2. Interpon D3000 also available. PLEASE NOTE: For technical reasons associated with color reproduction, the colors shown on this document give only an indication of color & finish. No warranty or guarantee can be given that they will exactly match the product as supplied. Copyright 2017 DS Group & Eclipse Architectural FULL SCALE EXCEPT AS NO NOTED SCALE 23

24 C3 PARTS SELECTION Weathersealing 3/8 (9.5mm) 13/64 (5mm) 7/64 (2.8mm) 13/32 (10mm) Kerf inserted gasket for head, jamb, sill & both astragals DS426B brown DS426BL black DS426W white available by footage, roll or carton: 1000 ft per roll or 2000 ft per carton KT423 Kerf inserted gasket for panel to panel weathersealing KT423B brown KT423BL black KT423W white available by footage, roll or carton. 984 ft per roll or 1968 ft per carton Pile seal for top track/head DS BL black bottom door rail snap on cover to conceal fasteners Door bottom brush sweep Used with floor channel application and low rise threshold (ADA) DS158C clear anodized DS158D bronze anodized available in 36 (914mm) and 48 (1219mm) lengths Glazing Gaskets SIDE EC3GGASKETEXTEPDM black SIDE EC3GGASKETINTEPDM black 17/64 (6.7mm) 3/16 (4.7mm) 17/64 (6.7mm) Pile seal DSP108-20BL 5/32 (4mm) 1-1/2 (12.7mm) Bulb seal EC3AP500BL black EC3AP500W white 24 FULL SCALE EXCEPT AS NOTED Copyright 2017 DS Group & Eclipse Architectural

25 C3 PARTS SELECTION I.E. 3L, 5L, etc. horizontal installation vertical installation Latching door hold () KT740C clear anodized KT740D bronze anodized KT740W white powder coat KT740BL black powder coat Standard on applicable configurations. T-Unit set screen adjustment screw main unit gasket C3 hinge gasket EC3HINGEGASKET C3 sill gasket, adhesive backed. EC3SILLGASKET (order 2 ea per sill) C3 door hold magnets (optional) KTDCAS satin aluminum finish KTDCAOL black finish Options Door hold magnets KTEMAG (optional) I.E. 5L magnets door hold Copyright 2017 DS Group & Eclipse Architectural FULL SCALE EXCEPT AS NOTED 25

26 C3 PARTS SELECTION Hinge count for doors up to 108 (2743mm) in height E3COMC Pivot set, 2 piece set E3COM Centre pivot set, 1 piece E3COMCLCS Left carrier set, 2 piece set E3COMCRCS Right carrier set, 2 piece set E3COMC intermediate carrier set 3 piece set Replacement part bottom pivot housing only jamb mounted middle pivot for doors over 88 (2235mm) EC3PIVOTG gasket for under C3 bottom pivot. apply to bottom before fastening pivot into sill channel. Replacement part (cup only for middle pivot) concealed bottom guide concealed bottom guide concealed bottom guide Hinge count for doors up to 108 (2743mm) in height E3COMEH Interior D pull handle for inswing doors 1 piece E3COM Hinge set with middle handle for outswing doors, 3 piece set E3COMN Hinge set with no middle handle for inswing doors 3 piece set E3COM Half offset hinge set with middle handle for outswing doors, 3 piece set E3COMHHN Half offset hinge set with no middle handle for inswing doors, 3 piece set Hinge count for doors from 108-1/16 to 144 (2745 to 3657mm) in height Intermediate carrier set with additional hinge Hinge set with handle for outswing doors Hinge set no handle for inswing doors Half offset hinge set with handle for outswing doors Half offset hinge set no handle for inswing doors concealed bottom guide flat (outswing doors) flat (inswing doors) offset (outswing doors) offset (inswing doors) 26 Copyright 2017 DS Group & Eclipse Architectural

27 C3 PARTS SELECTION Standard box quantities. Add single hinges when door height exceeds 108-1/16 (2745mm) PIVOT SET 2 piece set CENTRE PIVOT OR WALL PIVOT 1 piece Available finishes p.c. = powder coat E3COMCN satin aluminum p.c. E3COMCQ bronze p.c. Available finishes E3COMN satin aluminum p.c. E3COMQ bronze p.c. HALF OFFSET HINGE SET, Middle hinge w/handle for outswing doors 3 piece set Available finishes E3COMN satin aluminum p.c. E3COMQ bronze p.c. Suggested Number of Hinges for Panel Heights of 32 to 144 (812mm to 3657mm) Intermediate Carrier sets Hinge set or half offset hinge set Pivot set Top & bottom #1 #2 #3 #1 #1 #2 #2 #3 #3 HINGE SET (FLAT), Middle hinge with handle for outswing doors 3 piece set Available finishes E3COMN satin aluminum p.c. E3COMQ bronze p.c. #4 #5 #4 #4 #5 #5 INTERMEDIATE CARRIER SET 3 piece set Available finishes E3COMCN satin aluminum p.c. E3COMCQ bronze p.c. Up to 108 (2743mm) door height use 1, 3, 5 Up to 108 (2743mm) door height use 1, 3, 5 Up to 108 (2743mm) door height use 1 & 5 RIGHT CARRIER SET 2 piece set Available finishes E3COMCRCSN satin aluminum p.c. E3COMCRCSQ bronze p.c /16 to 144 (2745 to 3657mm) use 1, 2, 3, 4, /16 to 144 (2745 to 3657mm) use 1, 2, 3, 4, /16 to 144 (2745 to 3657mm) door height use 1, 2, 3, 4, 5 LEFT CARRIER SET HINGE SET (FLAT), No middle handle for inswing doors 2 piece set 3 piece set Available finishes Available finishes E3COMCLCSN satin aluminum p.c. E3COMNN satin aluminum p.c. E3COMCLCSQ bronze p.c. E3COMNQ bronze p.c. SINGLE HINGE HALF OFFSET, No handle (inswing doors) 1 piece Available finishes E3COMHHNHN satin aluminum p.c. E3COMHHNHQ bronze p.c. SINGLE HINGE (FLAT), No handle (inswing doors) 1 piece Available finishes E3COMNHN satin aluminum p.c. E3COMNHQ bronze p.c. HALF OFFSET HINGE SET, No middle handle for inswing doors 3 piece set Available finishes E3COMHHNN satin aluminum p.c. E3COMHHNQ bronze p.c. SINGLE HINGE HALF OFFSET, With handle for outswing doors 1 piece Available finishes E3COMHHN satin aluminum p.c. E3COMHHQ bronze p.c. SINGLE HINGE (FLAT), With handle for outswing doors 1 piece Available finishes E3COMHN satin aluminum p.c. E3COMHQ bronze p.c. D-PULL ( HANDLE) 1 piece Available finishes E3COMEHN satin aluminum p.c. E3COMEHQ bronze p.c. Copyright 2017 DS Group & Eclipse Architectural 27

28 Test Performance Met all requirements 3L1R Outswing System CAN / CGSB 82.1-M89 Air: A2 Water Leakage Resistance: B4 (510 PA) Wind Load Resistance: C3 For full test results, please visit Tomorrow s Innovative Solutions for Today s Doors & Windows The DS Group Of Companies: Draftseal, KrisTrack, Eclipse Architectural & DSD Hardware Head Office & Manufacturing Centre, Vancouver, Canada 7470 Buller Avenue, Burnaby, B.C. V5J 4S5 Canada Phone: (604) Fax: (604) info@thedsgroup.com Outside Vancouver, B.C., please use our toll free numbers: Phone: Fax: Branch Office & Distribution Centre, Toronto, Canada Phone head office toll free for branch address Branch Office & Distribution Centre, Los Angeles, California Phone head office toll free for branch address Eclipse Architectural Corporate Showrooms Vancouver & Toronto, Canada Los Angeles, California, USA THE DS GROUP IS THE BRAND IMAGE OF A.K. DRAFT SEAL LTD.