ThingMagic RFID Module INSTALLATION GUIDE. FOR CL e SERIES
|
|
- Eustacia Wade
- 5 years ago
- Views:
Transcription
1 ThingMagic RFID Module INSTALLATION GUIDE FOR CL e SERIES
2 SATO International Pte Ltd 438A Alexandra Road #05-0/02 Alexandra Technopark Singapore 9967 Tel: (65) Fax: (65) Be sure to ask your dealer about our maintenance contracts to ensure peace of mind during your usage of SATO products Version: SI-TMRFID-CL4e-0r IG Copyright SATO International Warning: This equipment complies with the requirements in Part 5 of FCC rules for a Class A computing device. Operation of this equipment in a residential area may cause unacceptable interference to radio and TV reception requiring the operator to take whatever steps are necessary to correct the interference. All rights reserved. No part of this document may be reproduced or issued to third parties in any form whatsoever without the express permission of SATO. The materials in this document are provided for general information and are subject to change without notice. SATO assumes no responsibilities for any errors that may appear.
3 Section : Introduction OVERVIEW This document describes the procedure for retrofitting installation of the ThingMagic RFID Module (UHF) on the SATO CL enhance series printer. The installation procedures described here are targeted at SATO-certified technical staff who are already familiar with the CL e series printers. Nevertheless, it is recommended that you go through this document at least once before attempting to install the RFID kit.. UNPACKING All parts listed below must be present before installation can be completed. The details are current at the time of this document s creation, and are subject to change. For further information, contact your nearest authorised SATO representative. Thing Magic RFID KIT SERVICE PARTS LIST FOR CL4XX PARTS PARTS NO. NO. NAME SPECIFICATION QTY P MODULE BR P SPACER(M2*L4) BSB MH PAN HEAD S TIGHT SCREW STP3006N 4 MT HEXAGON NUT 2N3 5 MD PAN HEAD SCREW+SW+WS 3JP3008+SW+WL 6 JG0048A CKN CLAMP CKN-05 7 MD PAN HEAD SCREW+SW+WS 2JP2005+SW+WS 4 8 MD PAN HEAD SCREW+SW+WS 3JP3006+SW+WL R MODULE CABLE-K SET-LF 770-E R RFID SIGNAL CABLE SET(40) 770-E R POWER SUPPLY CABLE SET(CL) 770-E R DC-DC CONVERTER PCB SET(5.3V) 770-E R UHF ANTENNA-A SUB ASSY-LF 770-E P COLLAR(5*8*3) MH WASHER HEAD SCREW 2JP Q SATO RFID SOLUTIONS STICKER 9 20 Q APPROVAL LABELS SUB ASSY 770-E Q STICKER (MODULE) Q FCC STICKER (PRINTER) Q STICKER(P30*50) Q THINGMAGIC STICKER B Please use WCL405B0 as the order number for the mounting bracket and antenna for the ThingMagic 4e module for SATO CL4xx e series. ThingMagic UHF RFID Module Installation Guide for SATO CL e-series Page -
4 Section : Introduction. INSTALLATION OVERVIEW The process of installing the ThingMagic UHF RFID kit can be broken down into four major procedures. A picture of each required major part will be shown for your reference in the relevant sections of this guide..2) Installing the antenna module.3) Assembling and Cabling the RFID Module.4) Mounting the RFID module.5) Testing the installation.2 INSTALLING THE ANTENNA MODULE The RFID antenna module is always required to be located near the print head. In the case of the CL e series, the antenna can be housed in the hollow rectangular compartment (called the antenna cover) located under the paper guide.. Locate the antenna cover. It is directly under the label guide. 2. To remove the antenna cover, remove two panhead screws (see picture) with a phillips-head screwdriver. antenna cover two pan-head screws paper guide 3. Insert the SATO antenna module (part R ) into the hollow side of the antenna cover, with the antenna cable oriented to the left side as shown here. 4. Insert four washers (part P ) on the four screw points of the antenna cover, and then screw four washer-head screws (part MH ) into these screw points to secure the antenna onto the antenna holder. 5. Reinstall the antenna cover into the printer. Make sure that the antenna cable is inserted first. washers Page -2 ThingMagic UHF RFID Module Installation Guide for SATO CL e-series
5 Section : Introduction.2 INSTALLING THE ANTENNA MODULE (CONT D) 6. Run the antenna cable through the gap in the printer as shown. 7. Install the supplied cable clamp (part CKN-05) to fasten the antenna cable neatly to the printer..3 ASSEMBLING AND CABLING THE RFID MODULE The ThingMagic RFID module is to be mounted in the electronic section of the CL, behind the label printing compartment. To mount the module, you will first locate the square metal plate in the label printing compartment. The plate is a kind of cover that holds an accessory in place behind it. The screws holding this plate will be replaced with longer screws to hold the RFID module.. Remove both side covers of the CL printer to access the circuit boards and label printing compartment. 2. Locate the square metal plate between the ribbon winding shafts in the label printing area. 3. The pan-head screw circled in the picture is to be replaced with a longer screw (part 3JP3008+SW+WL). Label printing area Square metal plate ThingMagic UHF RFID Module Installation Guide for SATO CL e-series Page -3
6 Section : Introduction.3 ASSEMBLING AND CABLING THE RFID MODULE (CONT D) 4. Locate the Module Bracket (part P ) and install 4 spacers (part BSB-2004) to it as shown (use the L-shaped bend as a reference). RFID Module 5. Install the RFID module (part MD ) using 4 pan head screws (part 2JP2005+SW+WS). 6. Turn the module bracket over and install the DC-DC converter board (part R ) using 3 pan head screws (part 2JP3006+SW+WL). 7. Connect the DC-DC converter board to the RFID module board with the supplied Module Cable (part R ) to connector CN4. 8. Next, connect the cable (part R ) to the DC-DC convertor board (CN3). Connect the other end of the cable to the main PCB of the printer, at CN20. CN4 DC-DC converter To CN20 of printer PCB 9. Disconnect the cable (part RH77060) from the operation panel and connect it to the DC- DC convertor, at (CN) below the antenna cable (see picture). Op panel CN 0.Connect a cable (part R ) to the DC- DC module (CN2) and connect the other end to the operation panel where the cable was removed in Step 9 above. Op panel CN2 Page -4 ThingMagic UHF RFID Module Installation Guide for SATO CL e-series
7 Section : Introduction.4 MOUNTING THE RFID MODULE. Now, mount the assembled RFID module to the printer chassis, on the side where the printer s main PCB is located. Use a Pan Head S Tight Screw (part MH ) to mount the top part of the module to a hole in the printer chassis (as shown circled in green). The screw hole is located under the Ribbon Supply Shaft on the label printing side of the printer. 2. To mount the bottom of the RFID module, use a Hexagon Nut (part MT300522) to secure it to the printer. The nut fits over the long screw (circled here in blue) which replaced the original screw of the square metal plate in Step 3 of the previous section. 3. Finally, connect the antenna cable from the SATO antenna module to the connector (circled in red) on the RFID module (see picture). This completes the connection of all cabling harnesses for the RFID module. Connect to antenna cable 4. The picture here shows an overview of the cable paths to and from the RFID module. 5. Perform a test of the RFID module to ensure that it has been connected properly. Connect to antenna cable ThingMagic UHF RFID Module Installation Guide for SATO CL e-series Page -5
8 Section : Introduction.5 TESTING THE INSTALLATION Before testing the installation, ensure that the print engine firmware version is not earlier than 05A7000A. Otherwise, update the firmware to a suitable version before proceeding with RFID testing and usage.. To confirm that your installation of the RFID is correct, press the LINE button when turning the printer ON. The printer goes into the Advanced Mode. 2. Press the LINE button until the LCD shows RFID MODE. ADVANCED MODE RFID MODE 3. Press the FEED button repeatedly until the screen shows the word READER VERSION. If a set of digits appears below this heading, then the RFID Module has been properly installed. READER VERSION Note: If no numbers appear below READER VERSION, then the installation was not successful. In this case, double-check all cabling connections and the installed firmware version. If necessary, redo the entire installation procedure. Page -6 ThingMagic UHF RFID Module Installation Guide for SATO CL e-series
For printer model: TG3 Series
RFID User Guide Parts List For printer model: TG3 Series PN: 9001227(A) Read this User Guide before and during usage of the above product. Keep this document handy for future reference. www.satoamerica.com
More informationM-8400RVe Printer. Parts List. Page 1-1. P/N Rev.B
M-8400RVe Printer Parts List Page 1-1 P/N 9001085 Rev.B Table of Contents M-8400RVe Parts List Page Frame Assembly...3 Head Assembly... 8 Ribbon Assembly... 11 Feed Roller Assembly... 16 Base Cover Assembly...
More informationM8400RV Base Cover Assembly Item # Part Number Part Description Qty
Base Cover Assembly Item # Part Number Part Description Qty 1 PH1741200 Base frame 1 2 PT6680100 Rubber foot 4 3 PA3741000 Frame bracket 1 4 MD4301022 Pan head screw 3 5 PA3742500 Frame bracket 1 6 MD4301022
More informationM-8460Se Printer Standard Unit
M-8460Se Printer Standard Unit Parts List Page 1-1 P/N 9001090 Table of Contents M-8460Se Spare Parts List Page Frame Assembly...3 Print Head Assembly...8 Ribbon Assembly... 11 Platen Frame Assembly...14
More informationDesk Mount Articulating Dual Monitor Arm with Cable Management & Height Adjust
Desk Mount Articulating Dual Monitor Arm with Cable Management & Height Adjust ARMDUAL *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com
More informationReplacing the PanelMate epro PS, PanelMate epro PS EE, and PanelMate epro PS OD 7685x-12 Series Backlight Assembly
Replacing the PanelMate epro PS, PanelMate epro PS EE, and PanelMate epro PS OD 7685x-12 Series Backlight Assembly Introduction The Backlight Replacement Kit provides a replacement backlight for the PanelMate
More informationUser Manual MODEL: KKW700V. Non-Touch True Display LCD Monitor. Installation Guide. 7 True Display LCD Monitor (VGA Interface)
Non-Touch True Display LCD Monitor User Manual Installation Guide 7 True Display LCD Monitor (VGA Interface) MODEL: KKW700V i-tech Company LLC TOLL FREE: (888) 483-2418 EMAIL: info@itechlcd.com WEB: www.itechlcd.com
More informationIn-Ceiling Electric Motorized Front Projection Screen Evanesce Series. User s Guide
In-Ceiling Electric Motorized Front Projection Screen Evanesce Series User s Guide Important Safety & Warning Precautions Make sure to read this user s guide and follow the procedures below. Caution: The
More informationNewScope-7A Operating Manual
2016 SIMMCONN Labs, LLC All rights reserved NewScope-7A Operating Manual Preliminary May 13, 2017 NewScope-7A Operating Manual 1 Introduction... 3 1.1 Kit compatibility... 3 2 Initial Inspection... 3 3
More informationMaterials: Programming Objectives:
Lessons Lesson 1: Basic Chassis Overview TETRIX Getting Started Guide In this lesson, users will learn how to use the elements of the TETRIX system that will be involved in building the basic chassis of
More informationField Service Procedure Replacement PCU Kit, Coastal
1. Brief Summary: Troubleshooting document for diagnosing a fault with and replacing the PCU assembly on the coastal series antennas. 2. Checklist: Initialization Rate Sensor Outputs Run the Built In Test
More informationUser Manual MODEL: KKF1500-PCAP. True FLAT P-CAP LCD Monitor. Installation Guide. 15 True FLAT P-CAP Touch LCD Monitor
True FLAT P-CAP LCD Monitor User Manual Installation Guide 15 True FLAT P-CAP Touch LCD Monitor MODEL: KKF1500-PCAP i-tech Company LLC TOLL FREE: (888) 483-2418 EMAIL: info@itechlcd.com WEB: www.itechlcd.com
More informationElectric Motorized Projection Screen PowerMax Tension Series
Electric Motorized Projection Screen PowerMax Tension Series User s Guide Important Safety & Warning Precautions Make sure to read this user s guide and follow the procedures below. Caution: The screen
More informationImportant Safety & Warning Precautions
Electric Motorized Projection Screen VMAX 2 Series User s Guide Important Safety & Warning Precautions Make sure to read this user s guide and follow the procedure below. Caution: The screen s Black Top
More informationSBL Series Wireless Clock Installation Manual (V2) Table of Contents
MOUNTING Table of Contents Wall Mount Installation... Page 2 Double Mount Installation...... Page 3-4 WIRING AND JUMPERS Wiring Information and Jumper Settings... Page 5 FREQUENTLY ASKED QUESTIONS SBL
More informationLED Backlight for Technics amplifiers
LED Backlight for Technics amplifiers Technics SE-A900S Technics SE-A900SM2 Technics SE-A909S Technics SE-A1000 Technics SE-A1000M2 Technics SE-A1010 Rev. 1.2 B Description The LED module is designed to
More informationElectric Wall/Ceiling Projection Screen Saker Series User s Guide
Electric Wall/Ceiling Projection Screen Saker Series User s Guide Important Safety & Warning Precautions Make sure to read this user s guide and follow the procedures below. Caution: The screen s Black
More informationIt will cause malfunction if the monitor is operating with unspecified power supply
User Manual / Installation Guide Model No. PTM-1525R/RT Warning! It will cause malfunction if the monitor is operating with unspecified power supply unit or incorrect power voltage. Do not exposure this
More informationGENUINE PARTS CAUTION
GENUINE PARTS SATELLITE RADIO INSTALLATION INSTRUCTIONS 1. DESCRIPTION: SATELLITE RADIO SYSTEM 2. PART NUMBERS: XM tuner kit 999U9-NV003 XM antenna kit 999U9-VR000 Sirius tuner kit 999U9-NV004 Sirius antenna
More informationKeysight 16048G/H Test Leads
Keysight 16048G/H Test Leads Operation and Service Manual Notices The information contained in this document is subject to change without notice. This document contains proprietary information that is
More informationCable ISOBUS Active Termination
ISOBUS Retrofit Kit Ag Leader Technology Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity ISOBUS Retrofit Kit 4100843 1 Hex Head Bolt
More information5351 Series Printer Parts Information Manual
5351 Series Printer Parts Information Manual Pertech TM Pertech Resources Inc. 2009 220324 Rev.02 Page 1 Disclaimer Information in this document is subject to change without notice. Consult your Pertech
More informationService Parts Diagrams. For Model: 10/20/09 Service Parts Diagrams for the Rear Projection SMART Board 3000i-DV Interactive Whiteboard 1
Service Parts Diagrams For Model: 000i-DV with the serial NEC MT060 numbers Serial greater numbers than 000 000i-DV-09000 to 0999 0/0/09 Service Parts Diagrams for the Rear Projection SMART Board 000i-DV
More informationElectric Wall/Ceiling Projection Screen Saker Tab-Tension Series User s Guide
Electric Wall/Ceiling Projection Screen Saker Tab-Tension Series User s Guide Important Safety & Warning Precautions Make sure to read this user s guide and follow the procedures below. Caution: The screen
More informationUser Manual MODEL: KK1500-TR. Touch Display LCD Monitor. Installation Guide. 15 Resistive Touch LCD Monitor
Touch Display LCD Monitor User Manual Installation Guide 15 Resistive Touch LCD Monitor MODEL: KK1500-TR i-tech Company LLC TOLL FREE: (888) 483-2418 EMAIL: info@itechlcd.com WEB: www.itechlcd.com User
More informationInteractive Satellite Terminal Installation / Validation Manual
Installation / Validation Manual Version October 5, 2016 Index INTERACTIVE SATELLITE TERMINAL 1. FCC COMPLIANCE... 3 2. TECHNICAL FEATURES...4 3. GENERAL DESCRIPTION...5 4. ELEMENTS CONTAINED IN THE TERMINAL...6
More informationElecraft KXAT2 Automatic Antenna Tuner Installation Instructions
Elecraft KXAT2 Automatic Antenna Tuner Installation Instructions Revision A, May 23, 2016 E740294 Copyright 2016, Elecraft, Inc. All Rights Reserved Introduction The KXAT2 internal automatic antenna tuner
More informationOWNER'S MANUAL SIGNAL COMMANDER
OWNER'S MANUAL SIGNAL COMMANDER THIS MANUAL CONTAINS INSTRUCTIONS FOR: LPDA 100 - INSTALLATION - OPERATION - TROUBLESHOOTING - EXPLODED PARTS DIAGRAM - WARRANTY AntennaTek, Inc. 425 S. Bowen, # 4 Longmont,
More informationOrdering parts and supplies
Ordering parts and supplies Parts Order replacement parts from the following website: http://www.hp.com/ssg/parts/direct_order.html Related documentation and software Order documentation and software from
More informationIMPORTANT: before using your new Sparkup, watch the tutorial at or read the following instructions.
User's Guide IMPORTANT: before using your new Sparkup, watch the tutorial at www.sparkupreader.com or read the following instructions. Need Support? 1-866-322-4675 support@sparkupreader.com WELCOME TO
More informationGigabit Multi-mode SX to Single Mode LX Converter. User s Manual NGF-728 Series. Warning COPYRIGHT
COPYRIGHT Gigabit Multi-mode SX to Single Mode LX Converter User s Manual NGF-728 Series All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted
More informationDoorphone Video Intercom
HOME SERIES INSTRUCTION MANUAL Doorphone Video Intercom with Colour 4.3 LCD Monitor EN Getting to know your LCD Screen (Front) 1 2 3 4 5 6 1) LCD Screen - This is where you view your visitor that the intercom
More informationRegister your product and get support at www.philips.com/welcome SDV8625T/27 User manual Contents 1 Important 4 Safety 4 For indoor use 4 For outdoor use 4 Notice for USA 4 Notice for Canada 5 Recycling
More informationIP-LINX Fiber :: X-XXXX
Fiber :: 055-797X-XXXX User Manual Telect, Inc. All rights reserved. 146653-A0 Table of Contents Chapter 1: Introduction...3 1.1 Tools Required...3 1.2 Additional Parts...3 1.3 Assemblies...3 Chapter 2:
More informationVHF + UHF Amplified HDTV Antenna Model OA8000 & OA8001 Installation Instructions Reception Frequencies
VHF + UHF Amplified HDTV Antenna Model OA8000 & OA8001 Installation Instructions Reception Frequencies VHF: 54-216 MHz UHF: 470-698 MHz FM: 87.9-107.9 MHz Voltage Input: AC110-120V / AC220-240V Working:
More informationInstallation Manual for New or Retrofit Installations
Installation Manual for New or Retrofit Installations Release Date: 24-August-2015 c Able Applied Technologies LTD. READ THE ENTIRE MANUAL COMPLETELY AND CAREFULLY BEFORE STARTING BEFORE YOU BEGIN ASSEMBLY
More informationAutomotive 72 Exterior Smart Lighting Kit
PACKAGE CONTENTS Automotive 72 Exterior Smart Lighting Kit 36 36 8 x Wire Mounting Bracket 16 x Screws 60" Extension Cable 24 ON / OFF 60 Exterior Kit can also function as interior lighting Instruction
More information100Base-FX Multi-mode to 100Base-FX Single Mode Converter. NXF-708 Series User s Manual
100Base-FX Multi-mode to 100Base-FX Single Mode Converter NXF-708 Series User s Manual COPYRIGHT All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted
More informationReplacing the PanelMate epro PS, PanelMate epro PS Classic, PanelMate epro PS EE, and PanelMate epro PS OD 7685x-15xx Series Backlight Assembly
Introduction Replacing the PanelMate epro PS, PanelMate epro PS Classic, PanelMate epro PS EE, and PanelMate epro PS OD 7685x-15xx Series Assembly Instruction Leaflet IL04802009E Effective September 2008
More informationUser's Guide AO4S-192 AIO
User's Guide AO4S-192 AIO Analog Expansion Board for HDSP AIO 4 Channels 24 Bit 192 khz Contents 1 Introduction... 3 2 Package Contents... 3 3 Hardware Requirements... 3 4 Technical Specifications... 3
More information8753E, 8753ET, and 8753ES Network Analyzer Option 1D5 High Stability Frequency Reference Upgrade Kit. Applicable Upgrade Kit Model Number
Installation Note 8753E, 8753ET, and 8753ES Network Analyzer Option 1D5 High Stability Frequency Reference Upgrade Kit Network Analyzer Model Number 8753E 8753ET 8753ES Applicable Upgrade Kit Model Number
More informationAUDIO ROOF KIT P/N , , APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 6
AUDIO ROOF KIT P/N 2882064, 2882065, 2882066 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please
More informationOWNER'S MANUAL SIGNAL COMMANDER
OWNER'S MANUAL SIGNAL COMMANDER THIS MANUAL CONTAINS INSTRUCTIONS FOR: LPDA 200 - INSTALLATION - OPERATION - TROUBLESHOOTING - EXPLODED PARTS DRAWING - WARRANTY AntennaTek, Inc. 425 S. Bowen, #4 Longmont,
More informationRemote Tuner Options for the DXE-MBVE-1 Vertical Antenna
Remote Tuner Options for the DXE-MBVE-1 Vertical Antenna DXE-MBVE-1UGBRT3 for the MFJ-993BRT 300 Watt Remote Tuner DXE-MBVE-1UGBRT4 for the MFJ-994BRT 600 Watt Remote Tuner DXE-MBVE-1UGRT8 for the MFJ-998RT
More informationIP-LINX. Installation Guide
Installation Guide Installation Guide, 146653-4 Copyright 2017, Telect, Inc. All Rights Reserved Telect and Connecting the Future are registered trademarks of Telect, Inc. 22425 East Appleway Ave. # 11
More informationOWNER'S MANUAL SIGNAL COMMANDER
OWNER'S MANUAL SIGNAL COMMANDER THIS MANUAL CONTAINS INSTRUCTIONS FOR: MOD 550 - INSTALLATION - OPERATION - TROUBLESHOOTING - EXPLODED PARTS DRAWING - WARRANTY AntennaTek, Inc. 425 S. Bowen, #4 Longmont,
More informationInteractive Satellite Terminal Installation / Validation Manual
Installation / Validation Manual Version September 14, 2017 Index INTERACTIVE SATELLITE TERMINAL 1. FCC COMPLIANCE... 3 2. TECHNICAL FEATURES...4 3. GENERAL DESCRIPTION...5 4. ELEMENTS CONTAINED IN THE
More informationSIR-GM1 GM CLASS-2 BUS COMPATIBLE SIRIUS SATELLITE RADIO TUNER
SIR-GM1 GM CLASS-2 BUS COMPATIBLE SIRIUS SATELLITE RADIO TUNER Installation Guide Congratulations on your purchase of the SIR-GM1 the GM Compatible SIRIUS Satellite Radio Tuner! Your SIR-GM1 is designed
More informationRead all precautions and instructions in this manual before you begin using this equipment. Please keep this manual for future reference.
Indoorcycling Group GmbH Happurger Strasse 84-88 90482 Nuernberg Germany info@indoorcycling.com Wireless Commercial Computer - PRO 1.0 Articel no. ST 020120 Articel no. 020120 Caution! Read all precautions
More informationStep 1. 2x Kep Nut 1x Left Motor Assembly
Start with the build completed in Lesson 3 of the TETRIX Getting Started Guide. Steps 1 to 3 involve removing elements from the model. These elements will be reattached later. Parts to be Removed Step
More informationPower Injector 1520 Series
Power Injector 1520 Series Technical Specifications Input voltage 100 to 240 VAC Output voltage 56.0 VDC Voltage range tolerance 54 VDC to 57 VDC Maximum current 1.43 A No load current 15 ma 56VDC@0.71A
More informationSUBCARRIER TRANSFER FILTER INSTRUCTION BOOK IB622702
SCF611S SUBCARRIER TRANSFER FILTER INSTRUCTION BOOK IB622702 SCF611S SUBCARRIER TRANSFER FILTER TABLE OF CONTENTS PAGE SHIPPING INSPECTION 2 MODULE CONFIGURATION 2 INSTALLING MODULES 2-3 CABLING 3 FRONT
More informationEndurance Robotics PT-3
Endurance Robotics PT-3 The Endurance Robotics Pan and Tilt PT-3 base is a rugged pan and tilt system based around standard sized hobby servos. Featuring all around rigid 1/4" ABS laser cut construction,
More informationFOSC-600 C and D I N S T A L L A T I O N I N S T R U C T I O N
FOSC-600 C and D I N S T A L L A T I O N I N S T R U C T I O N In-line and butt version Cold applied re-usable fiber optic closure Contents 1 Introduction 1.1 Product description 1.2 Capacity 2 General
More information2000 Series Weather Stations Analog Temperature / RH Sensor Upgrade Kit PRODUCT MANUAL KIT # 3613WDU
2000 Series Weather Stations Analog Temperature / RH Sensor Upgrade Kit PRODUCT MANUAL KIT # 3613WDU 1 The 3613WDU Analog Temperature / RH Sensor Upgrade Kit is used to upgrade Watchdog 2000 Series Weather
More informationKramer Electronics, Ltd.
Kramer Electronics, Ltd. Preliminary USER MANUAL Model: VM-1110xl Balanced Audio Distributor Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 2 3 Overview 3 4 Your VM-1110xl Balanced
More informationapple Service Source Apple Cinema HD Display 23" LCD (ADC) 11 April Apple Computer, Inc. All rights reserved.
apple Service Source Apple Cinema HD Display 23" LCD (ADC) 11 April 2003 2003 Apple Computer, Inc. All rights reserved. apple Service Source Take Apart Apple Cinema HD Display 23" LCD (ADC) 2003 Apple
More informationJACK Digital HDTV Over-the-Air Antenna
JACK Digital HDTV Over-the-Air Antenna w/built-in SureLock Digital TV Signal Meter TM OA8200-White OA8201-Black SPECIFICATIONS Dimensions: 11.25 H x 16 W x 12.5 L Powered Amplifier +12 volt / 100 ma working
More informationKramer Electronics, Ltd. USER MANUAL. Model: VM Video Component Distributor
Kramer Electronics, Ltd. USER MANUAL Model: VM-1045 Video Component Distributor Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 1 3 Overview 3 4 Your VM-1045 Video Component Distributor
More information3 Cleaning. 4 Technical data
EXC+ EXC- Sig- SIG+ SEN- SEN+ 2.4 Attaching cable to the analog board Attaching cable of the weighing cell to the system solution Connect the cable to the appropriate terminal strip of the Ex1 system solution
More information4 Wiring Brochure Wiring and installation of specific control
- Wiring Brochure tekmarnet 4 User Switch 480 W 480 09/09 1 Information Brochure Choose controls to match application 2 Application Brochure Design your mechanical applications 3 Rough In Wiring Rough-in
More informationVMA ACTIVE MATRIX TFT COLOR LCD MONITOR OWNER S MANUAL INSTALLATION GUIDE
VMA6491 6.4 ACTIVE MATRIX TFT COLOR LCD MONITOR OWNER S MANUAL INSTALLATION GUIDE OWNER S MANUAL WARNING! THE CLARION VMA6491 LCD MONITOR IS DESIGNED FOR REAR SEAT PASSENGER VIEWING ONLY. THIS PRODUCT
More informationWDK-2500-STROBE. User Guide
WDK-2500-STROBE User Guide Warning: This device complies with Part 15 of the FCC rules, operation of this device is subject to the following conditions: 1. This device may not cause harmful interference.
More informationDISCOVER SE: 19 INCH LCD TREADMILL CONSOLE
DISCOVER SE: 19 INCH LCD TREADMILL CONSOLE PARTS MANUAL 19DT-XXXXX-XX EAT, EPT, EDT, EIT, ENT, EST, FAT, FPT, FDT, FIT, FXT, FST October 2018 Table of Contents Console Table 1 Common Boards for Consoles
More informationSC-C1M SiriusConnect TM Vehicle Tuner
SC-C1M SiriusConnect TM Vehicle Tuner For Special Market Applications Installation Guide Congratulations on the Purchase of your new SIRIUS SC-C1 SiriusConnect TM Vehicle Tuner. The SC-C1M is packaged
More information24-Fiber LANLINXS (Model # ) 48-Fiber LANLINXS (Model # ) User Manual
24-Fiber LANLINXS (Model # 055-8632-5000) 48-Fiber LANLINXS (Model # 055-8832-5000) User Manual 24-Fiber LANLINXS (Model # 055-8632-5000) 48-Fiber LANLINXS (Model # 055-8832-5000) User Manual, Part Number
More informationipad mini 4 LTE Right Cellular Antenna Replacement
ipad mini 4 LTE Right Cellular Antenna Replacement Replace the right cellular antenna in an ipad mini 4 LTE. Written By: Evan Noronha ifixit CC BY-NC-SA www.ifixit.com Page 1 of 22 INTRODUCTION Follow
More informationMINI UHF TRIPLE INPUT MODULATOR MODEL: RFMX3 OWNER S M A N UA L (PLEASE READ BEFORE USE)
MINI UHF TRIPLE INPUT MODULATOR MODEL: RFMX3 OWNER S M A N UA L (PLEASE READ BEFORE USE) 1 CHAPTER TABLE OF CONTENTS P A G E 1. Important-Safety Precautions..2 2. The Modulation System 3-5 3. System Control
More informationMagelis XBT ZG43 Backlight Replacement Kit Quick Reference Guide
Magelis XBT ZG43 Backlight Replacement Kit Quick Reference Guide Thank you for purchasing the XBT ZG43 replacement backlight. Be sure to read the following Backlight Replacement Instruction bulletin prior
More informationGENUINE PARTS SATELLITE RADIO INSTALLATION INSTRUCTIONS. 1. DESCRIPTION: Satellite Radio System 2. APPLICATION: Frontier (2006~)
GENUINE PARTS SATELLITE RADIO INSTALLATION INSTRUCTIONS 1. DESCRIPTION: Satellite Radio System 2. APPLICATION: Frontier (2006~) Xterra (2006~) 3. PART NUMBERS: XM Tuner Kit 999U9-AS003 SIRIUS Tuner Kit
More informationUSER MANUAL. KW-11T Wireless High Definition Transmitter. KW-11R Wireless High Definition Receiver MODELS: P/N: Rev 9
KRAMER ELECTRONICS LTD. USER MANUAL MODELS: KW-11T Wireless High Definition Transmitter KW-11R Wireless High Definition Receiver P/N: 2900-300194 Rev 9 Contents 1 Introduction 1 2 Getting Started 2 2.1
More informationInnoMedia ESBC B. Quick Install Guide. 1
InnoMedia ESBC 9528-4B Quick Install Guide www.innomedia.com 1 Table of Contents Introduction 3 Package Contents 3 CAUTION 3 Installation 4 Wall-Mounting Instructions 6 Troubleshooting 7 Appendix A. LED
More information1 Remove SCREWS (2) CELL-EXT Cable Assembly Installation Guide. LYNX Touch/QuickConnect Touch Controls. General Information. Remove the 3GL/3GLC
CELL-EXT Cable Assembly Installation Guide For Documentation and Online Support: http://www.security.honeywell.com/hsc/resources/mywebtech General Information The CELL-EXT cable assembly is used to connect
More informationGENUINE PARTS. SIRIUS Under Glass Antenna Kit
GENUINE PARTS SATELLITE RADIO INSTALLATION INSTRUCTIONS 1. DESCRIPTION: Satellite Radio System 2. APPLICATION: Pathfinder (2006-2007) 3. PART NUMBERS: XM Tuner Kit 999U9-AS005 SIRIUS Tuner Kit 999U9-AS006
More informationCellular Signal Booster
Drive 4G-X Cellular Signal Booster THE ALUMINUM CASING OF YOUR SIGNAL BOOSTER!! WILL ADJUST TO THE TEMPERATURE OF ITS ENVIRONMENT, BUT IS DESIGNED TO PROTECT THE SIGNAL BOOSTER TECHNOLOGY. FOR EXAMPLE,
More informationTen-Tec (865) Service Department:(865)
Ten-Tec (865) 453-7172 Service Department:(865) 428-0364 Installation Instructions for Ten-Tec Jupiter AT538K Tuner Kit The installation of the AT538K is divided into two steps. The first step is to reprogram
More informationAWT150C/AWT150CS/ AWT151C CCD Camera
AWT150C/AWT150CS/ AWT151C CCD Camera ISSUED OCTOBER 2018 WARNING Failure to follow all instructions and safety precautions in this manual, in the vehicle and body manufacturers' manuals and on the safety
More informationGENUINE PARTS ! CAUTION
GENUINE PARTS SATELLITE RADIO INSTALLATION INSTRUCTIONS 1. DESCRIPTION: SATELLITE RADIO SYSTEM 2. PART NUMBERS: XM tuner kit 999U9-NV003 Sirius tuner kit 999U9-NV004 XM antenna kit 999U9-VQ006 Sirius antenna
More informationIndustrial Monitor Update Kit
Industrial Monitor Update Kit (Bulletin Number 6157) Installation Instructions 2 Table of Contents Table of Contents Industrial Monitor Update Kit... 3 Overview... 3 Part 1 - Initial Preparation... 5 Part
More informationFully ly Automaticti. Motorised Satellite t TV System. User s manual REV
REV. 1.0 Fully ly Automaticti Motorised Satellite t TV System User s manual Customer Help Line: 1300 139 255 Support Email: support@satkingpromax.com.au Website: www.satkingpromax.com.au www.satkingpromax.com.au
More informationM2 Antenna Systems, Inc. Model No: 23CM35
M2 Antenna Systems, Inc. Model No: 23CM35 SPECIFICATIONS: Model... 23CM35 Frequency Range... 1250 To 1300 MHz *Gain... 20.94 dbi Front to back... 25 db Typical Beamwidth... E=17 H=18 Feed type... Folded
More informationInstallation instructions, accessories. Subwoofer. Volvo Car Corporation Gothenburg, Sweden. Page 1 / 29
Installation instructions, accessories Instruction No 30752136 Version 1.1 Part. No. 30752135 Subwoofer Volvo Car Corporation Subwoofer- 30752136 - V1.1 Page 1 / 29 Equipment A0000162 A0000161 A0801178
More informationapple Service Source Apple Studio Display 17" LCD (ADC) Updated 6 Decenber Apple Computer, Inc. All rights reserved.
apple Service Source Apple Studio Display 17" LCD (ADC) Updated 6 Decenber 2004 2003 Apple Computer, Inc. All rights reserved. apple Service Source Take Apart Apple Studio Display 17" LCD (ADC) 2003 Apple
More informationSCREEN WINCH SYSTEM INSTALLATION MANUAL FOR SCREENS UP TO 300 cm. of width
SCREEN WINCH SYSTEM INSTALLATION MANUAL FOR SCREENS UP TO 300 cm. of width Before installing the screen winch system, please read the following instructions carefully: The screen winch system must be used
More informationInstallation Guide. Cellular Plug-in for Inverters with SetApp. Version 1.1
Installation Guide Cellular Plug-in for Inverters with SetApp Version 1.1 2 Version History Version 1.0 (initial release)- January 2019 Version 1.1- January 2019 Modified Technical Specifications modem
More informationField Service Procedure Replacement GACP Control Panel Kit, ST24
1. Brief Summary: Troubleshooting document for diagnosing a fault with and replacing the Graphic Antenna Control Panel (GACP) for the ST24 antenna. 2. Checklist: Verify Power to the GACP Verify Communications
More informationGeneral Wiring and Installation Guidelines. Typical Mounting Installations Electrical Connections General Guidelines Common Questions & Answers
General Wiring and Installation Guidelines Typical Mounting Installations Electrical Connections General Guidelines Common Questions & Answers Congratulations on your purchase of a Dynapar brand encoder.
More informationAssembling and Mounting the Presentation Display, Speakers, Speaker Screens, and Table Door
CHAPTER 8 Assembling and Mounting the Presentation Display, Speakers, Speaker Screens, and Table Door July 13, 2012, This document provides you with the procedures you perform to assemble and mount the
More informationActive FCB-EV-HD-SDI INTERFACE BOARD
Active FCB-EV-HD-SDI INTERFACE BOARD HD-SDI digital interface for the Sony FCB-EV series cameras (FCB-EV7520A/7500/7310/7300/7100/5500/5300) 1080p/1080i/720p high definition video Built in test pattern
More informationElectric Motorized Projection Screen Spectrum Tab-Tension Series User s Guide
Electric Motorized Projection Screen Spectrum Tab-Tension Series User s Guide Important Safety Precautions Make sure to read this user s guide and follow the procedures below prior to screen operation.
More informationJACK Digital HDTV Over-the-Air Antenna w/built-in SureLock Digital TV Signal Meter
JACK Digital HDTV Over-the-Air Antenna w/built-in SureLock Digital TV Signal Meter OA8200 - White OA8201 - Black SPECIFICATIONS Dimensions: 11.25 H x 16 W x 12.5 L Powered Amplifier: +12 Volt / 100 ma
More informationKramer Electronics, Ltd. USER MANUAL. Model: PT-102VN. 1:2 Video DA
Kramer Electronics, Ltd. USER MANUAL Model: PT-102VN 1:2 Video DA Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 2 3 Overview 3 4 Your PT-102VN 1:2 Video DA 4 5 Using the PT-102VN
More informationExpand Your Factory Radio add Satellite Radio Harness Connection
Expand Your Factory Radio Harness Connection add Satellite Radio Dip Switches Port 1 Port 2 (See Manual) USB Honda/Acura Owner s Manual GateWay Owner s Manual Media ISSR12 GateWay PXAMG 01-22-13 Table
More informationOptEnet OC48 Regenerator Module User Manual
OptEnet OC48 Regenerator Module User Manual Content Page INTRODUCTION............................................................................. 1 Revision History........................................................................
More informationBionic Elephant Trunk. Assembly Instructions
Bionic Elephant Trunk Assembly Instructions Equipment and Supplies Required items from the Bionics Kit and/or Materials Pack: 1. Tail fin (small) assembled 2 see Start Here for tail fin assembly instructions
More informationTeamWork Kits Installation Guide
TX 0 RX COM +5V APARATUS US TeamWork Kits Installation Guide TeamWork 400 and TeamWork 600 Kits The TeamWork 400 and TeamWork 600 kits consist of an HDMI switcher, system controller, Cable Cubby, and cables
More informationElectric Wall/Ceiling Projection Screen Saker Plus Series User s Guide
Electric Wall/Ceiling Projection Screen Saker Plus Series User s Guide Important Safety & Warning Precautions Make sure to read this user s guide and follow the procedures below. Caution: The screen s
More informationTracVision 95W LNB Installation
TracVision 95W LNB Installation To enable a TracVision system to receive DIRECTV international programming from the linear satellite located at 95W, a 95W LNB must be installed in a secondary M7SK or M9
More informationWINEGARD INSTALLATION MANUAL. Model GM Carryout Ladder Mount for mounting pipes with outer diameters between 1 to 1-1/8
WINEGARD INSTALLATION MANUAL Model GM-3000 Carryout Ladder Mount for mounting pipes with outer diameters between 1 to 1-1/8 WARNING: DO NOT USE THE LADDER MOUNT AS A STEP! NOT INTENDED FOR USE WITH THE
More informationIMPORTANT! Special Instructions for the TracVision M3DX Conversion System ( )
IMPORTANT! Special Instructions for the TracVision M3DX Conversion System (01-0279-05) You have purchased a special TracVision M3DX conversion system that can be configured for either circular or linear
More information