Operating instructions Capacitive level sensor KNQ
|
|
- Bertha Dean
- 5 years ago
- Views:
Transcription
1 Operating instructions Capacitive level sensor KNQ 708 / 0 0 / 006
2 Contents Functions and features... 3 Electrical connection... 3 Installation... 4 Adjustment... 4 Locking / unlocking... 6 Operation... 7
3 Functions and features The capacitive level sensor monitors the level in tanks. It detects if medium is present or not and provides a switched signal. Adjustable to the respective medium via the teach element or via the programming input / function check output (FC output) : : 3: 4: 5: Active area (teach element) Electrical connection (connector or connection cable) Sensing face (damping area) LEDs red, yellow, green 4 mounting holes Electrical connection Disconnect the power supply. Connect the unit as indicated on the type label. 3
4 Installation Fit the mounting adapter () onto the sensor (). The mounting adapter is an accessory and has to be ordered separately (E0879). Fix the sensor to the outer wall of the vessel using the fixing strap. The fixing strap is an accessory and has to be ordered separately (E0880). The sensor detects the medium through the tank wall. Suitable for dry media and liquids. Only for non-metallic tanks. Adjustment The sensor is adjusted via the teach element. To activate the teach element a metal object, e.g. a screwdriver, is necessary. Use this object to touch the active area. : Active area of the teach element 4
5 Empty adjustment The sensor is adjusted to the empty vessel. If it detects material, the switching signal changes. The green LED flashes. (= The unit is in the programming mode.) Activate the teach element for max. 5s * After a short time the green LED is lit continuously. (= The unit is set and in the operating mode.) Deactivate the teach element Full adjustment For most applications an empty adjustment is sufficient. In addition you can also carry out an adjustment to the medium (e.g. to obtain an optimum excess gain for special applications). The green LED first flashes slowly (approx. Hz), then more quickly (approx. Hz). (= The unit is in the programming mode.) Activate the teach element for about 5-0s * The green and the yellow LEDs are lit. (= The unit is set and in the operating mode.) Deactivate the teach element 5
6 *You can also lock/unlock the unit via pin (FC output) (wire programming). A signal on this input corresponds to the activation of the teach element. Type FPKG: (+UB) on pin. Type FNKG: (-UB) on pin. Programming via the teach element has priority over wire programming via pin (FC output). New programming or one in process via wire programming is blocked by actuating the teach element. The values saved for the empty adjustment are not overwritten by the full adjustment. You can repeat the full adjustment as often as you wish. After a new empty adjustment the switching thresholds are automatically reset; the values defined last are overwritten. If no adjustment is possible (e.g. "empty" signal and "full" signal are about the same), the red LED flashes after adjustment (in addition the function check output provides a Hz signal). Activate the teach element briefly (= acknowledgement), the unit changes to the operating mode with unchanged values. Repeat the adjustment (starting with step ) if you want to carry out another adjustment. Locking / unlocking The green LED first flashes slowly, then more quickly. After 0s it goes out, the unit is locked. Locking: Activate the teach element for min. 0s*. After 0 s all LEDs go out briefly. The unit is then unlocked and the LEDs indicate the current operating state. Unlocking: Activate the teach element for min. 0s*. 6
7 *You can also lock/unlock the unit via pin (FC output). A signal on this input corresponds to the activation of the teach element. Type FPKG: (+UB) on pin. Type FNKG: (-UB) on pin. If the FC output wire is activated for less than 0s while the unit is locked, the red LED flashes for about 5s and indicates faulty operation. After about 5s the unit automatically returns to the operating mode. Operation Check whether the unit operates correctly. Indication by LEDs and function check output: LED green LED yellow LEDs yellow + red LED red + FC output unit is ready for operation ON = output is switched flashing = short circuit of the switching output ON = undefined operating range - when the tank is full: the medium is not reliably detected - when the tank is empty: the empty signal has changed since the last adjustment (e.g. caused by deposits of dirt) flashing or Hz signal of the FC output = error during adjustment or locking/unlocking 7
Operating instructions Through-beam sensor. OJ51xx / / 2004
Operating instructions Through-beam sensor OJ5xx UK 7098 / 0 07 / 004 Contents Function and features... Installation... Installation of the supplied mounting fixture...4 Electrical connection...4 Setting
More informationOperating instructions Through-beam sensor. OJ51xx laser / / 2010
Operating instructions Through-beam sensor OJ5xx laser 70480 / 00 05 / 200 Contents Preliminary note. Symbols used 2 Safety instructions Functions and features 4 4 Installation 4 5 Electrical connection5
More informationElectrical connection
Splice sensor Dimensioned drawing en 04-2014/06 50116166-01 4mm 12-30 V DC We reserve the right to make changes DS_IGSU14CSD_en_50116166_01.fm Reliable detection of splice on paper web or plastic web With
More informationOperating instructions Retro-reflective sensor. OJ50xx laser / / 2010
Operating instructions Retro-reflective sensor OJ50xx laser 70481 / 00 05 / 010 Contents 1 Preliminary note3 1.1 Symbols used 3 Safety instructions 3 4 Installation 4 4.1 Installation of the supplied mounting
More informationElectrical connection
(I)GSU 14C Ultrasonic Label Fork Dimensioned drawing en 06-2011/12 50109234-01 4mm 12-30 V DC 4 m/s We reserve the right to make changes DS_IGSU_14C_en.fm Ultrasonic forked sensor for universal application
More informationDimensions. Model Number. Electrical connection. Features. Pinout Product information. Indicators/operating means. LGS25 Serie.
Q Dimensions Transmitter Detection field + 9. Detection field 7.8 n Beam. Beam Receiver III 0. 0 Fix H H H Fn Model Number Light grid with fixed cable with -pin, M x connector, and fixed cable with 8-pin,
More informationAmplifier for fiber optics. Dimensioned drawing
Amplifier for fiber optics Dimensioned drawing with cable en 01-2012/09 50118006 up to 1050mm up to 270mm with M8 connector 10-30 V DC We reserve the right to make changes DS_LV463_en_50118006.fm wo, large,
More informationHigh Resolution Multicolor Contrast Scanner. Dimensioned drawing
Specifications and description KRTM 20 High Resolution Multicolor Contrast Scanner Dimensioned drawing en 01-2011/06 50116669 12mm 20mm 50mm 12-30 V DC 50 / 25 khz We reserve the right to make changes
More informationElectrical connection
Color sensors Dimensioned drawing en 02-2013/01 50121262 068-14515 12mm 32mm 10-30 V DC 500 Hz Scanner for color detection Simultaneous selection of up to 3 colors Detection independent of distance Teach-in
More informationW 190 L: Application-based Laser Technology, the optimum solution for demanding applications
Photoelectric proximity switches Photoelectric reflex switches W 90 L: Application-based Laser Technology, the optimum solution for demanding applications Do your customers require reliable sensors suitable
More informationOnline data sheet SGS4-S108P3PS2W03 SLG SWITCHING AUTOMATION LIGHT GRIDS
Online data sheet SGS-S08PPSW0 SLG SWITCHING AUTOATI LIGHT GRIDS SGS-S08PPSW0 SLG SWITCHING AUTOATI LIGHT GRIDS A B C D E F H I J K L N O P R S T Detailed technical data Features Technology Ordering information
More informationOperating Instructions
CNTX Contrast sensor Operating Instructions CAUTIONS AND WARNINGS SET-UP DISTANCE ADJUSTMENT: As a general rule, the sensor should be fixed at a 15 to 20 angle from directly perpendicular to the target
More information4.0 Description. 2-channel operation D1 and D2 rated at 200 VA each. 1-channel operation D1 rated at 400 VA (see connection chap. 6.
_307 238_EN_LUXOR 405_310 410 01_D.qxd 21.09.16 10:54 Seite 1 Operating Manual Dimmer module 4050100 1.0 Designated use The LUXOR dimmer module expands the existing LUXOR series of devices. It switches
More informationElectrical connection
Colour sensors Dimensioned drawing Part No. 50109619 12.5mm 60mm 10-30 V DC 6 khz Scanner for colour detection Very short response time 85µs for detection of fast or small objects and marks Direct indication
More informationSensor module. Safety instructions. Function Correct use. Product characteristics. Structure of the device. Operation. Ref.No.
Sensor module Ref.No.: SM 1608 V03 Safety instructions Caution! Electrical devices may only be installed and fitted by electrically skilled persons. Non-compliance with the installation information could
More information1 Output 1 operation. 3 Pressure unit display. 4 Main display Large 4-character LCD display. 5 Sub-display Small 4-character LCD display.
ure Sensor DP-100 Series INSTRUCTI MANUAL High-performance Digital Display For use outside Japan MEUML-DP100 V1.1 Thank you for purchasing products from Panasonic Electric Works SUNX Co., Ltd. Please read
More informationLevel Measurement silometer FMC 420, FMC 423
Technical Information TI 077F/00/en Level Measurement silometer FMC 420, FMC 423 For connecting to capacitance probes or Deltapilot S hydrostatic probes Main applications The is used for continuous level
More informationOwner s guide How to use your new Opalum Furniture Sound System
Owner s guide How to use your new Opalum Furniture Sound System Table of contents 1. The Opalum Furniture Sound System 3 2. Controls and connectors 4 3. The status indicator 5 3.1 Modes of the status indicator
More informationDIN Connectors DIN06 E-03
DIN Connectors DIN0 E-0 Contents Introduction HOSIDEN DIN connectors are supplied to electronic equipment manufacturers both in Japan and overseas and are very well accepted because of high quality, a
More informationEC5415B. B-Tronic EasyControl. Assembly and Operating Instructions. Wall/hand-held transmitter, 15-channel, bidirectional
B-Tronic EasyControl EC5415B en Assembly and Operating Instructions Wall/hand-held transmitter, 15-channel, bidirectional Important information for: Fitters / Electricians / Users Please forward accordingly!
More informationEA63-7D. Generator Automatic Voltage Regulator Operation Manual. Self Excited Automatic Voltage Regulator
EA63-7D Generator Automatic Voltage Regulator Operation Manual Self Excited Automatic Voltage Regulator SP POWERWORLD LTD Willows, Waterside, Ryhall, Stamford, Lincs, PE9 4EY, UK Tel: +44 1780 756872 -
More informationElectrical connection
Colour sensors Dimensioned drawing en 02-2014/05 50109619-01 12.5mm 60mm 10-30 V DC 6 khz Scanner for colour detection Very short response time 85µs for detection of fast or small objects and marks Direct
More informationGreenParking. Commissioning guide. GreenParking
GreenParking GreenParking Page Table of Contents Introduction....4. GreenParking...4. Working principle...4.3 Intended use...4.4 About this commissioning guide...4.5 Warnings.............................................................
More informationtechnical data (according to IEC ) Degree of protection IP 67 Max. ripple content 15 % U B / 20 % U B (amplifier) No-load supply current
Inductive Sensors: high-temperature ü For ambient temperatures of up to +230 C ü With integrated electronics, up to +180 C ü With external electronics, up to +230 C ü Excellent long-term reliability (according
More informationPanel-mounting thermostats, type series EM
Data sheet 602025 Page /5 Panel-mounting thermostats, type series EM Particularities Operating temperature limiter Limit value range up to +650 C with temperature compensation Brief description Panel-mounting
More informationADVANCED ultrasonic sensors with analog output. Dimensioned drawing
ADVANCED ultrasonic sensors with analog output Dimensioned drawing en 07-2017/02 50124880 4...20 ma 0...10 V 25 400mm 150 1300mm 15-30 V DC We reserve the right to make changes PAL_DMU418BX3LTVC_en_50124880.fm
More informationof Switzerland FM Tuner MK2 E 2.01
of Switzerland FM Tuner MK2 E 2.01 1 Contents FM Tuner Installation Connections Tuner Menu Tuner Operation Basic settings Edit Tuner name Manual station search Storing stations with Add / Store Station
More informationALO 030 MKII. 30 Watt DMX LED scanner. User manual
ALO 030 MKII 30 Watt DMX LED scanner User manual Safety instructions WARNING! Always keep this device away from moisture and rain! Hazardous electrical shocks may occur! WARNING! Only connect this device
More informationDLP200M 2 Relay Module for Heating and Cooling Plants
Product Sheet TH6.24 Thermostat Type DLP200M DLP200M 2 Relay Module for Heating and Cooling Plants The DLP 200 M is a relay module for activation of loads (namely thermal actuators or circulators) in wireless
More informationAES-402 Automatic Digital Audio Switcher/DA/Digital to Analog Converter
Broadcast Devices, Inc. AES-402 Automatic Digital Audio Switcher/DA/Digital to Analog Converter Technical Reference Manual Broadcast Devices, Inc. Tel. (914) 737-5032 Fax. (914) 736-6916 World Wide Web:
More informationLIGHT COPILOT II. elationlighting.com Internet:
LIGHT COPILOT II E-mail: info@ elationlighting.com Internet: http://www.elationlighting.com 1 Introduction Thank you for your purchase of the LIGHT COPILOT II. The LIGHT COPILOT II is an intelligent lighting
More informationCapacitance Limit Detection nivotester FTC 420/421/422
Technical Information TI 127F/00/en Capacitance Limit Detection nivotester FTC 420/421/422 Limit switches in Minipac design for liquids and bulk solids Application Nivotester FTC 420...422 capacitive limit
More informationLuminaire installation box Surface-mounted box Ceiling installation box
-Smart PTM Ambient light sensor and motion detector for constant lighting control uminaire installation box Surface-mounted box Ceiling installation box Overview: -SMART PTM i is an ambient light sensor,
More information1.5mm amplitude at 10 to 55Hz frequency in each X, Y, Z direction for 2 hours 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times
Color Mark Color Mark Feature Outstanding color matching accuracy - RGB light emitting diodes and 12-bit resolution - 2 detection modes (color only / color + intensity) - -step sensitivity adjustment for
More informationProjector Lift. User Guide INSTALLATION OPERATION SETUP PROGRAM IR REMOTE FACTORY RESET
INSTALLATION OPERATION SETUP PROGRAM IR REMOTE FACTORY RESET MODELS: Small - Standard Deep - Wide - Large X-Large - XX-Large Projector Lift User Guide ver 26.01.012 2012 PureTheatre CONTENTS Part Checklist...
More informationInstallation Guide VL-MV10. Model No.
Installation Guide Model Name Model No. Main Monitor Station VL-MV0 R Main monitor station is described as "main monitor" in this guide. R In this guide, the suffix of each model number (e.g., the "EX"
More informationDLP600M 6+1 Relay Module for Heating and Cooling Plants
Product Sheet TH6.25 Thermostat Type DLP600M DLP600M 6+1 Relay Module for Heating and Cooling Plants The DLP 600 M is a relay module for activation of loads (namely thermal actuators or circulators) in
More informationREGO Start&Go USER MANUAL
REGO Start&Go USER MANUAL Version 0 Rev. B of 03/03/16 Page 1 of 15 Introduction The purpose of the manual is to describe all of the steps required to commission and correctly operate the REGO Start&Go
More informationOrbit TM DIGITAL SHAKERS
Orbit TM DIGITAL SHAKERS INSTRUCTION MANUAL Models P2, P4, M60, 300, 1000, 1900 Labnet International PO Box 841 Woodbridge, NJ 07095 Phone: 732 417-0700 Fax: 732 417-1750 email: labnet@labnetlink.com 2
More informationStandard signal metering in wall-mounting case
User manual AKV-2VR4C Standard signal metering in wall-mounting case Technical features: Digit height: 20 mm Colour: red Range of display: -999 9999 Wall-mounting case: black, made of ABS-plastic Protection
More informationLUT Luminescence scanners: Seeing what no-one else can
LUT Luminescence scanners Luminescence scanners LUT Luminescence scanners: Seeing what no-one else can Special features: A semi-conductor light source is used in the LUT series no lamp change required.
More informationL-LAS Series L-LAS-LT-2500-XL. Design. L-LAS Series Laser Line Sensors. Product name: L-LAS-LT-2500-XL
L-LAS Series - Line laser
More informationENC - LKE51 - L I B
ENC-LKE51 Linear Magnetic Encoder FEATURES DESCRIPTION LKE51 ORDERING INFORMATION Resolutions: 5, 10, 25, and 50μm Linear Travel Speed: Up to 16m/s Standard Sensor for Linear and Rotary Axis Gap Clearance
More informationINSTRUCTIONS FOR USE Pro-Ject Tuner Box S2
INSTRUCTIONS FOR USE Pro-Ject Tuner Box S2 Dear music lover, thank you for purchasing a Pro-Ject Audio Systems FM-tuner. In order to achieve maximum performance and reliability you should study these instructions
More informationDimming actuators GDA-4K KNX GDA-8K KNX
Dimming actuators GDA-4K KNX GDA-8K KNX GDA-4K KNX 108394 GDA-8K KNX 108395 Updated: May-17 (Subject to changes) Page 1 of 67 Contents 1 FUNCTIONAL CHARACTERISTICS... 4 1.1 OPERATION... 5 2 TECHNICAL DATA...
More informationJune/July 2016 Med Tips
Replacing the SeQual Integra Filter June/July 2016 Med Tips Helpful Hints and FAQs The SeQual Integra s Compressor Intake Filter (PN: SP4405-SEQ) will include a hook and loop fastener to better attach
More informationTailgate module BEXPRO PRINS VSI
new digital technology For any damage that may arise due to our instructions, we can of course, assume no liability. The publication is solely for informational Purposes has been written and contains no
More informationYour Global Automation Partner. Ultrasonic Sensors. Operating Instructions
Your Global Automation Partner RU CK40 RU CP40 Ultrasonic Sensors Operating Instructions Contents 2 Hans Turck GmbH & Co. KG T +49 208 4952-0 F +49 208 4952-264 more@turck.com www.turck.com Contents 1
More informationCSM Color sensors. Color sensors for the detection of a single color in restricted space conditions
CSM Color sensors Color sensors for the detection of a single color in restricted space conditions Due to its compact design, the CSM can be used in the most confined of spaces. The choice of color tolerance
More informationInstallation and Setting up Instructions for the 990 Signal Conditioning Instrument
Installation and Setting up Instructions for the 990 Signal Conditioning Instrument Contents Page 1.0 Overview... 3 2.0 Installation.. 4 2.1 Electrical connections... 4 2.2 Cable selection... 4 2.3 Electrical
More informationwww.mete-enerji.com.tr INDUSTIAL IEC PLUGS AND SOCKETS INDUSTIAL IEC PLUGS AND SOCKETS Position of the Earthing Contact acc. to IEC 60309-2 225/400-265/460 V~ 60 Hz (1) 3 P+N+ 3 P+ 2 P+ 120/208-144/250V~
More informationEasyReader Model ER2C
London Electronics Limited Thorncote Road, Near Sandy, Bedfordshire SG19 1PU Tel +44(0)1767 626444 Fax +44(0)1767 626446 www.london-electronics.com help@london-electronics.com Large display pulse input
More informationTechnical data. General specifications. Indicators/operating means
Model Number Single head system Features Sensor head bidirectional and rotatable Function indicators visible from all directions Quick mounting bracket Selectable sound lobe width Programmable Diagrams
More informationC-net WIND. User s Guide
C-net WIND User s Guide EMC Directive 89/336/EEC This product has been designed to be compliant with the above EMC Directive. Maximum performance and compliance with the EMC Directive can only be ensured
More informationGamma instabus. Technical product information
Gamma instabus Technical product information Universal dimmer N 554D31, 4 x 300 VA / 1x 1000 VA, AC 230 V Universal dimmer N 554D31 Control of dimmable lamps, including LED without minimum load Output
More informationSONARtrac Technical Bulletin
Page 1 of 14 Purpose: The purpose of this document is to formally release the SONARtrac TM Troubleshooting. The guide lists problems that may be encountered by personnel installing SONARtrac TM meters
More informationOperating instructions Flow monitor. SAxxx / / 2015
Operating instructions Flow monitor SAxxx0 UK 80231782 / 00 10 / 2015 Contents 1 Safety instructions...4 2 Functions and features...5 3 Function...5 3.1 Operating modes (ModE)...6 3.2 Select the medium
More informationDigital Fiber Amplifier E3X-DA51. Ordering Information. Digital Fiber Amplifier Provides High Performance and Ease of Use
Digital Fiber Amplifier Digital Fiber Amplifier Provides High Performance and Ease of Use First amplifier to offer three user-selectable displays: digital level, percentage and analog display Flashing
More informationSOURCE COMMANDER MSS433 A/V SELECTOR OWNER S MANUAL INSTALLATION GUIDE
SOURCE COMMANDER MSS433 R L V R L V R L V R L V M U L T I S T A T I O N A/V SELECTOR OWNER S MANUAL INSTALLATION GUIDE OWNER S MANUAL/INSTALLATION GUIDE WARNING! THE CLARION MSS433 MULTISTATION A/V SELECTOR
More informationMG-XV operating instruction. Measuring of norm signals, 4-8-digit. Panel instrument type MG-BV Construction instrument type MG-AV
MG-XV operating instruction Measuring of norm signals, 4-8-digit Panel instrument type MG-BV Construction instrument type MG-AV Contents 1. Brief description... 3 2. Safety instructions... 3 2.1. Proper
More informationEasyReader Model ER4C
London Electronics Limited Thorncote Road, Near Sandy, Bedfordshire SG19 1PU Tel +44(0)1767 626444 Fax +44(0)1767 626446 www.london-electronics.com help@london-electronics.com Large display pulse input
More information17 19 PROFESSIONAL LCD COLOUR MONITOR ART
17 19 PROFESSIONAL LCD COLOUR MONITOR ART. 41657-41659 Via Don Arrigoni, 5 24020 Rovetta S. Lorenzo (Bergamo) http://www.comelit.eu e-mail:export.department@comelit.it WARNING: TO REDUCE THE RISK OF FIRE
More informationImproX (TRT) Twin Remote Terminal INSTALLATION MANUAL
SPECIFICATIONS MODEL NUMBER: XRT910-0-0-GB-XX XRT911-0-0-GB-XX XTT911-0-0-NN-XX IMPROX TRT ImproX (TRT) Twin Remote Terminal INSTALLATION MANUAL Working Environment XRT910-0-0-GB-XX... (Aluminium Extruded
More informationMax. temp. of sensor C. Capillary tube mm. Switching difference K. Sensor cartridge mm
21.610/1 RAK: Universal thermostat How energy efficiency is improved Demand-led controlling, monitoring and limiting, without auxiliary energy. Areas of application For controlling and monitoring the temperature
More informationLevel control. Disposing with care. Just scan QR Code and watch the Video. A video says more than a thousand words
Disposing with care Everyday tasks in the laboratory that have become The back of our hands and we know, especially this is where the danger lurks. One of those seemingly trivial tasks is the disposal
More informationWIRING. Connection connector. NPN output type Standard type. Main circuit. High-function type. Main circuit. PNP output type.
INSTRUCTI MANUAL Sensor High-performance Digital Display DP-1 Series Thank you very much for using SUNX products. Please read this Instruction Manual carefully and thoroughly for the correct and optimum
More informationAK-PVE4 Operating Instructions. Measuring of norm signals in wall-type units. Performance:
AK-PVE4 Operating Instructions Measuring of norm signals in wall-type units 1 2 P Performance: Digit heights: 20 mm Colour: red Display range: -999 9999 Wall-type housing: light grey made of ABS-plastic
More informationSPECTRO Series. SPECTRO-1-30-UV/VIS-9x1. Design. SPECTRO-1 Series Single-Channel Sensors (Contrast Measurement) Product name:
SPECTRO Series SPECTRO-1-30-UV/VIS-9x1 - Measuring range typ. 10 mm... 40 mm - 9x UV LED, 375 nm, focused (AC-/DC-operation or OFF for luminous objects can be switched) - Additional slit aperture 9 mm
More informationAnalogue HD Monitoring Set: 8-Channel Video Recorder + 4 Outdoor Cameras
Page 1 of 5 Complete set with 8-channel recorder, 4 outdoor cameras, 1 TB hard disk drive, 5 power supply units and accessories Incl. 1 TB hard disk drive for approx. 2 weeks of continuous recording Simple
More informationFD Trinitron Colour Television
R 4-205-569-32(1) FD Trinitron Television Instruction Manual GB KV-14LM1U 2000 by Sony Corporation NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment
More informationWF next: Fork sensors for a wide range of applications
WF next: Fork sensors for a wide range of applications D ATA S H E E T Fork sensors TThe detection of labels, marks and double sheets, as well as holes and edges are typical applications for the new WF
More information800 Displaying Series Flowmeter
TECHNICAL PRODUCT INSTRUCTION SHEET 800 Displaying Series Flowmeter OVERVIEW The principle of operation is very simple. A jet of liquid is directed at a free running Pelton wheel turbine in a specially
More informationInstruction manual. DALI Gateway art Installation manual
Instruction manual DALI Gateway art. 01544 Installation manual Contents GENERAL FEATURES AND FUNCTIONALITY from page 5 ETS PARAMETERS AND COMMUNICATION OBJECTS from page 6 COMMUNICATION OBJECTS GENERAL
More informationFigure 1: Device components
Order No. : 2860 10 Order No. : 2830 10 Operation- and Assembly Instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe
More informationPROXIMITY SWITCHES INDUCTIVE TUBULAR SENSOR M30 SERIES HIGHLIGHTS APPLICATIONS
INDUCTIVE TUBULAR SENSOR M30 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating
More informationLWC Series LWC-80. Design. LWC Series Laser Wire Counters. Product name: Accessories: LWC-80
LWC Series LWC-80 Laser Wire Counting - Insensitive to outside light (due to interference filter, modulated light) - Visible laser spot (red light 670 nm) - Parameterisable through integrated switch and
More informationUnlocking of building entrance door shall be possible by pressing the monitor's door-opener button.
DIGITAL COLOR VIDEO INTERCOM SYSTEM The contractor shall supply, install, test and commission a modern Electronic Digital Color Video Entry Phone System of an approved manufacturer and design to facilitate
More informationUSER S Manual NGLT104WPD NGLT150WPD LCD TV / Monitor (IP67 Grade)
USER S Manual NGLT104WPD NGLT150WPD LCD TV / Monitor (IP67 Grade) This Manual is revisable without further notice Contents CONTENTS ------------------------------------------------------------------- 1
More informationFilters for Power Lines (Low Leakage Current)
Filters for Power Lines (Low Leakage Current) 40 to 100 A, 100 db from 150 khz Series/Type: Date: January 2004 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures
More informationUNDER TABLE 4X1 HDMI SWITCHER
UNDER TABLE 4X1 HDMI SWITCHER Welcome! Everyone at Altinex greatly appreciates your purchase of the UT260-041. We are confident that you will find it to be reliable and easy to use. If you need support,
More informationE3X-DA-S. Digital Fiber Sensors. Perfection Transcended! A Wealth of Advanced Functions for Easy and Reliable Application
E3X-DA-S Digital Fiber Sensors Perfection Transcended! A Wealth of Advanced Functions for Easy and Reliable Application Evolution and Perfection The next-generation platform for a wide range of sensing
More informationSolis Export Power Manager
Solis Export Power Manager Installation and Operation Manual Ningbo Ginlong Technologies Co., Ltd. No. 57 Jintong Road, Binhai Industrial Park, Xiangshan, Ningbo, Zhejiang, 3572, P.R.China Tel: +86 (0)574
More informationE3X-DA-S. Digital Fiber Sensors. Perfection Transcended! A Wealth of Advanced Functions for Easy and Reliable Application
E3X-DA-S Digital Fiber Sensors Perfection Transcended! A Wealth of Advanced Functions for Easy and Reliable Application Evolution and Perfection The next-generation platform for a wide range of sensing
More informationUV Power Monitor. incident light 200 to 370 nm 300 C (Use at temperatures below the Fiber Unit s rated operating
UV Power Monitor Monitor the Output of a UV Light Source through an Optical Fiber Cable Head Unit withstands temperatures of up to 300 C. Easy-to-read digital display of measurement values. Harmful UV
More informationTeamWork Kits Installation Guide
TX 0 RX COM +5V APARATUS US TeamWork Kits Installation Guide TeamWork 400 and TeamWork 600 Kits The TeamWork 400 and TeamWork 600 kits consist of an HDMI switcher, system controller, Cable Cubby, and cables
More informationAES-404 Digital Audio Switcher/DA/Digital to Analog Converter
Broadcast Devices, Inc. AES-404 Digital Audio Switcher/DA/Digital to Analog Converter Technical Reference Manual Broadcast Devices, Inc. Tel. (914) 737-5032 Fax. (914) 736-6916 World Wide Web: www.broadcast-devices.com
More informationModel 1421 Distribution Amplifier
Model 1421 Distribution Amplifier Installation and Operating Instructions The 1421 Distribution Amplifier provides four independent, wide bandwidth outputs from one video input. The unit is color compatible
More informationUSER MANUAL FOR THE ANALOGIC GAUGE FIRMWARE VERSION 1.1
by USER MANUAL FOR THE ANALOGIC GAUGE FIRMWARE VERSION 1.1 www.aeroforcetech.com Made in the USA! WARNING Vehicle operator should focus primary attention to the road while using the Interceptor. The information
More informationFlexibility and Safety. BERNSTEIN safety hinge switches
Flexibility and Safety BERNSTEIN safety hinge switches BERNSTEIN safety hinge switches Advantages of safety hinge switches in comparison to traditional door contacts Easy to install and tamper-resistant
More informationField Service Procedure Replacement PCU Kit, ST24
1. Brief Summary: Troubleshooting document for diagnosing a fault with and replacing the main PCU PCB on the ST24 antenna. 2. Checklist: Verify Initialization Built In Test 3. Theory of Operation: The
More informationInstromet Weather Systems Ltd
Instromet Weather Systems Ltd Stand Alone Rainfall sensor Part number: 480 1000 186 www.instromet.co.uk Document Contents: 1) Introduction 2) Package Contents 3) Contact 4) Outdoor sensor installation
More informationPart names (continued) Remote control
Introduction Part names (continued) Remote control (1) STANDBY ( 25) (1) (2) ON ( 25) (3) (3) ID - 1 / 2 / 3 / 4 s ( 18) (4) (4) COMPUTER 1 ( 27) (7) (5) COMPUTER 2 * (8) (6) COMPUTER 3 * (10) (13) (7)
More informationINSTRUCTIONS FOR USE Pro-Ject Phono Box S2
INSTRUCTIONS FOR USE Pro-Ject Phono Box S2 Dear music lover, thank you for purchasing a Pro-Ject Audio Systems phono amplifier. In order to achieve maximum performance and reliability you should study
More informationQuick Reference Guide
Quick Reference Guide Wireless Video Intercom System Model No. VL-SWH70 series Video Intercom System with Wireless Sensor Camera/ Video Intercom System Model No. VL-SVH70 series Door Station (Doorphone)
More informationSlot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) * EE-SX/6 Photomicrosensor with 0- to 00-mA direct switching capacity for built-in application. Series includes models that
More informationOperating and indicating elements. 4 x LED green Lighting LED = power and
Functions and features The optical distance sensor measures distances of 0.2...10 m indicates the measured value on the 10-segment display generates 2 output signals according to the set output function
More informationSafety Information. Camera System. If you back up while looking only at the monitor, you may cause damage or injury. Always back up slowly.
Table of Contents Introduction...3 Safety Information...4-6 Before Beginning Installation...7 Installation Guide...8 Wiring Camera & Monitor...9-10 Replacement Installation Diagram...11 Clip-On Installation
More informationZN-PD. Smallest Air Particle Sensor in the Industry for In-line Measurement. Air Particle Sensor. Features
Air Particle Sensor Smallest Air Particle Sensor in the Industry for In-line Measurement Suitable for continuous measurement. With Realtime Clean Air Monitor. Be sure to read Safety Precautions on page
More informationAPPLICATIONS. Automatic warehouse. Trasportation lines
INDUCTIVE TUBULAR SENSOR M12 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating
More informationFOSC 450 C6 and D6 Closures
FOSC 450 C6 and D6 Closures I N S T A L L A T I O N I N S T R U C T I O N Fiber Optic Splice Closure 1. General Product Information The FOSC 450 C6 and D6 fiber optic splice closures use compressed gel
More information