Setup Guide. Dolby PRM Rev. 1.1
|
|
|
- Dwight Lawson
- 6 years ago
- Views:
Transcription
1 Setup Guide Dolby PRM-4200 Rev. 1.1
2 Introduction CalMAN Required Software Version CalMAN Display Calibration Software can automatically create an optimized 3D calibration LUT for the Dolby PRM-4200 monitor. Follow the procedure below to automatically create and load an optimized 3D LUT monitor calibration file into one of the Dolby monitor s Custom operating modes. Version or newer CalMAN Required Workflow Color Cube (3D LUT) Dolby Monitor Software Version or newer Dolby Monitor Control Port Ethernet port on rear of monitor Dolby Network Connection Dolby Initial Setup Connect the Dolby PRM-4200 to the same network router or local area network as the CalMAN computer, using an Ethernet cable. To calibrate the Dolby monitor with a 3D LUT, you must manually configure two settings in the monitor before you connect to the monitor within CalMAN: 1. On the Dolby remote, select either the Custom 1 or the Custom 2 operating mode to enable 3D LUT calibration. Note: There are no Brightness, Contrast, or Luminance controls available in the Custom operating modes. 2. On the Dolby remote, press the Edit key to set the Video Range to either SMPTE, Full, or Custom. To set a SMPTE+ range under Custom (SMPTE black, extended white), set Range max to 4095 and set Range min to
3 Note: The Dolby Video Range selection needs to be set before connecting CalMAN to the Dolby monitor. 3
4 Color Cube (3D LUT) Workflow Initial Setup section The Color Cube workflow in CalMAN is used to create 3D display calibration LUTs. In the CalMAN main menu, select Open Workflow Template / Color Cube (3D LUT). Proceed through each step of the Color Cube workflow in a normal fashion, using the following notes for Dolby monitor specifics. In the Initial Setup section of the Color Cube workflow (Figure 1), step through the following pages: Figure 1. CalMAN Color Cube (3D LUT) workflow. Session Options page On the Session Options page, under Input Signal Levels, select either Video (16-235) (to support the Dolby SMPTE or Custom ranges) or PC (0-255) (to support the Dolby Full range). Note: The CalMAN Levels selection needs to be set before connecting CalMAN to the Dolby monitor. 4
5 Session Setup - Meter Connect Connect your color meter to the CalMAN computer. Then, on the Session Setup page, click the Find Meter button. On the Find Meters dialog, select your meter if it is listed, then click Search. If your meter is not listed on the Find Meters dialog, just click Search. Session Setup - Source Connect On the Session Setup page, click the Find Source button. On the Source dialog, under Manufacturer, select Dolby. Under Model, select Dolby PRM (FTP). See the Test Pattern Source Note, at the end of this document. Session Setup - LUT Device Setup On the Session Setup page, click the Find 3D LUT Device button. On the Find Display dialog (Figure 2), under Manufacturer, select Dolby. Under Model, select Dolby PRM (FTP). Figure 2. CalMAN Find Display dialog, for connecting to the Dolby monitor for LUT creation and loading. On the Dolby remote, under System / Utilities / IP Configuration, note the monitor s IP address. Enter the Dolby monitor IP address, and then click Connect. CalMAN then writes a unity 1D LUT file to the monitor. The monitor takes about a minute to load the LUT data. Wait for the monitor to load the LUT before you continue the calibration. 5
6 Display Pre-Test section Display Optimization section In the Display Pre-Test section of the Color Cube workflow, you can measure the performance of a display before you calibrate it, on the Gamma & ColorChecker page and on the Advanced Linearity page. Because there are no Brightness, Contrast or Luminance controls available in the Dolby Custom 1 and the Custom 2 operating modes, however, you will not optimize any monitor picture controls before performing the 3D LUT calibration. Display Calibration section Because there are no Brightness, Contrast or Luminance controls available in the Dolby Custom 1 and the Custom 2 operating modes, skip the Display Optimization section of the workflow. Skip directly to Calibrate Cube LUT. In the Display Calibration section of the Color Cube workflow, there are provisions for calibrating both a 1D RGB LUT (1D Ramp LUT page) and a 3D cube LUT (3D Cube LUT page). When we are calibrating a Dolby monitor with a 3D LUT, we will skip the 1D Ramp LUT page (1D RGB LUT) and use only the 3D Cube LUT page. 1D Ramp LUT page Skip over this page when creating a 3D LUT file for a Dolby monitor, since we do not need to create a 1D LUT. 3D Cube LUT page 1. On the 3D Cube LUT page, click the AutoCal (rotating arrows) button at the right end of the meter action buttons. The AutoCal Setup dialog then appears (Figure 3). 6
7 Figure 3. CalMAN AutoCal Setup dialog, for selecting 3D LUT creation options. 2. Under Output Cube Size, select either: 65 Points SMPTE (to support the Dolby SMPTE range), or. 65 Points SMPTE+ (to support the Dolby Custom range). 3. Under File Path, select the desired directory path and provide a name for the LUT file that CalMAN will create (e.g. monitor ID and date). 4. Under Calibration Type, select the desired type of 3D LUT calibration process. IR Profile (time based): Creates the best quality display calibration 3D LUT possible in the selected period of time. You select how much display quality you have time for, from 30 minutes to maximum display quality (6,000 points max). Uses Intelligent Resolution Profiling to search out the most nonlinear color space areas and correct those first. IR Profile (point based): Creates the best quality display calibration 3D LUT possible with the selected number of measurement points (1,000-10,000 points). Uses Intelligent Resolution Profiling to search out the most nonlinear color space areas and correct those first. 7
8 Display Validation section Lightning LUT: Creates a display calibration 3D LUT in five minutes or less. Produces a very high quality result on professional displays with moderate linearity. Displays with significant nonlinearity may produce marginal results. 5. Under Video Range, select the same range as for the Output Cube Size, above. 6. Click OK. Upon completion of the AutoCal 3D LUT calibration process, CalMAN automatically loads the optimized 65x65x65 point LUT calibration data into the Dolby monitor. This takes a while. If you have used the Dolby internal test pattern generator to perform the calibration, power cycle the Dolby monitor after the LUT finishes loading, to reset the Dolby signal processing. The Dolby internal test pattern generator does not feed through the 3D calibration LUT, so the internal patterns cannot be used for calibration validation. Test Pattern Source Note The Dolby PRM-4200 has an internal test pattern generator, which can be used to calibrate the Dolby s internal 3D LUT. However, the Dolby internal test patterns have a significant switching delay when each new test pattern is accessed. Also, the internal test pattern generator does not feed through the 3D calibration LUT, so the internal Dolby patterns cannot be used to validate the 3D calibration LUT. For these reasons, you may wish to use another test pattern source, such as the CalMAN Client 3 or a hardware test pattern generator for both the calibration and the validation. 8
9 About / Contact About Portrait Displays Portrait Displays, Inc., since 1993, is a leading application software provider (ASP) for PC, smartphone, and tablet displays. The Portrait Displays team now includes SpectraCal, the world s leading provider of video display calibration software. The combined companies offer value-added, feature-rich solutions to both OEM display manufacturers and end users seeking improved accuracy and manageability of their displays. Portrait Displays, an Intel Capital Portfolio company, is a private corporation with headquarters in Pleasanton, California, USA with representatives in Europe, Taiwan, China, Japan, and Korea. Contact Us Submit a Technical Support Request: spectracal.com sales@spectracal.com Portrait Displays, Inc Owens Drive Pleasanton, CA USA portrait.com 9
Setup Guide. Panasonic BT-4LH310. Rev. 1.1
Setup Guide Panasonic BT-4LH310 Rev. 1.1 Introduction CalMAN Required Software Version CalMAN Display Calibration Software can automatically create an optimized 3D calibration LUT for the Panasonic 4LH310
Setup Guide. AJA Video Systems LUT-box. Rev. 1.2
Setup Guide AJA Video Systems LUT-box Rev. 1.2 Introduction CalMAN Required Version: CalMAN takes advantage of the AJA Video Systems LUT-box features to calibrate a video display with a 10-bit 17x17x17
Setup Guide. Flanders Scientific BoxIO. Rev. 1.1
Setup Guide Flanders Scientific BoxIO Rev. 1.1 Introduction CalMAN Required Version CalMAN takes advantage of the features of the Flanders Scientific BoxIO advanced color management device to calibrate
Setup Guide. Pandora Pluto. Color Management System. Rev. 1.1
Setup Guide Pandora Pluto Color Management System Rev. 1.1 Introduction CalMAN Recommended Workflow CalMAN takes advantage of the Pandora Pluto features to calibrate a video display with a 10-bit 17x17x17
Setup Guide. Teradek COLR. Rev. 1.1
Setup Guide Teradek COLR Rev. 1.1 Introduction CalMAN Required Version CalMAN takes advantage of the Teradek COLR features to calibrate a video display with a 10-bit 33x33x33 3D cube lookup table (LUT).
Setup Guide. Blackmagic Design Teranex Mini. Rev. 1.3
Setup Guide Blackmagic Design Teranex Mini Rev. 1.3 Introduction CalMAN takes advantage of the internal 3D LUT feature of the Blackmagic Design Teranex Mini to calibrate a video display with a 33x33x33
Setup Guide. Konvision monitors. Rev. 1.0
Setup Guide Konvision monitors Rev. 1.0 Introduction CalMAN Display Calibration Software can automatically create multiple optimized calibration 3D LUTs for the entire line of Konvision monitors, with
Setup Guide. Blackmagic Design HDLink Pro. Rev. 1.1
Setup Guide Blackmagic Design HDLink Pro Rev. 1.1 Introduction CalMAN Recommended Workflow CalMAN takes advantage of the Blackmagic Design HDLink Pro features to calibrate a video display with a 10-bit
Setup Guide. SpectraCal ColorBox. (also eecolor) Image Calibration Processor. Rev. 1.1
Setup Guide SpectraCal ColorBox (also eecolor) Image Calibration Processor Rev. 1.1 Introduction CalMAN takes advantage of the SpectraCal ColorBox (also eecolor) processor features to calibrate a video
Setup Guide. EIZO Monitors. Rev. 1.4
Setup Guide EIZO Monitors Rev. 1.4 Introduction CalMAN Display Calibration Software can automatically create optimized calibration 1D or 3D LUTs for EIZO monitors equipped with a self-calibration sensor.
Setup Guide. Creating 3D LUTs. CalMAN Overview. Rev. 1.1
Setup Guide Creating 3D LUTs CalMAN Overview Rev. 1.1 Introduction This is an overview guide for using the Intelligent Resolution Profiling (IRP), Lightning LUT, and 3D LUT Retargeting technologies that
Setup Guide. CalMAN Client for SCRATCH. Rev. 1.1
Setup Guide CalMAN Client for SCRATCH Rev. 1.1 Introduction CalMAN Required Software Version: CalMAN Display Calibration Software interfaces directly with ASSIMILATE SCRATCH software through the CalMAN
Setup Guide. Quantum Data 70x/80x Series. Video Generators. Rev. 1.1
Setup Guide Quantum Data 70x/80x Series Video Generators Rev. 1.1 Introduction CalMAN Required Version The Quantum Data 70x and 80x Video Generator test patterns can be automatically controlled by CalMAN
Setup Guide. CalMAN ColorMatch. Rev. 1.1
Setup Guide CalMAN ColorMatch Rev. 1.1 Introduction Thank you for your interest in using the free version of CalMAN ColorMatch. If you haven t already received your free ColorMatch license, follow this
Setup Guide. Panasonic AS800/AX800/AX Models. Rev. 1.1
Setup Guide Panasonic AS800/AX800/AX900 2014 Models Rev. 1.1 Introduction CalMAN Recommended Workflows For the Panasonic models listed above, CalMAN automatically calibrates the display s two point grayscale
Setup Guide. Panasonic. VT30/GT30/DT30, VT50/GT50/WT50/DT50 (EU/UK models) Rev. 1.1
Setup Guide Panasonic VT30/GT30/DT30, VT50/GT50/WT50/DT50 (EU/UK models) Rev. 1.1 Introduction CalMAN Recommended Workflows CalMAN automatically calibrates the Panasonic VT30/GT30/DT30/VT50/GT50/WT50/DT50
Setup Guide. SpectraCal MobileForge. Pattern Generator App. Rev. 1.6
Setup Guide SpectraCal MobileForge Pattern Generator App Rev. 1.6 Introduction MobileForge is a free pattern generator app for ios, Android, and Fire TV devices. MobileForge generates accurate test patterns
Setup Guide. Panasonic. VT60/ZT60/WT60/DT60, WT600 (US/Canada) VT60/ZT60/GT60/WT60/DT60/FT60, VT65, WT600 (EU) VT60/WT60/DT60 (NZ/Asia) Rev. 1.
Setup Guide Panasonic VT60/ZT60/WT60/DT60, WT600 (US/Canada) VT60/ZT60/GT60/WT60/DT60/FT60, VT65, WT600 (EU) VT60/WT60/DT60 (NZ/Asia) Rev. 1.1 Introduction CalMAN Recommended Workflows CalMAN automatically
2018 Quick Reference Guide
2018 Quick Reference Guide Introduction This guide designed as a reference to the Sony BRAVIA Workflow, used to calibrate Sony's upper-end Android TVs including Z9D and subsequent LCD and OLED models.
Setup Guide. Murideo SIX-G. Digital Video Generator. Rev. 1.6
Setup Guide Murideo SIX-G Digital Video Generator Rev. 1.6 Introduction The Murideo SIX-G digital video generator can be automatically controlled by the CalMAN Display Calibration Software to produce measurement
Setup Guide. Panasonic VX200/VX300/BT300. Plasma Displays. Rev. 1.1
Setup Guide Panasonic VX200/VX300/BT300 Plasma Displays Rev. 1.1 Panasonic VX200/VX300 (BT300 below) CalMAN Recommended Workflows CalMAN automatically calibrates the Panasonic VX200/VX300 display s two
2018 Quick Reference Guide
2018 Quick Reference Guide Introduction CalMAN can guide the calibration of a 2018 LG Super UHD LCD or an 2018 LG OLED TV in HDTV SDR, HDR10, and Dolby Vision modes. This assures the most accurate rendering
Setup Guide. Panasonic. VT30/DT30/D30, VT50/WT50 (US/NA models) Rev. 1.1
Setup Guide Panasonic VT30/DT30/D30, VT50/WT50 (US/NA models) Rev. 1.1 Introduction CalMAN automatically calibrates the Panasonic VT30/DT30/D30/VT50/WT50 US/NA model display s two point grayscale controls,
Setup Guide. X-Rite i1display. Retail and OEM. Rev. 1.2
Setup Guide X-Rite i1display Retail and OEM Rev. 1.2 Introduction CalMAN supports the X-Rite i1 Display colorimeter (Retail and OEM) for measuring many display types, including CCFL, LED, plasma, and also
Setup Guide. Color Volume Analysis Workflow. Rev. 1.2
Setup Guide Color Volume Analysis Workflow Rev. 1.2 Introduction Until the introduction of HDR, a video display s color reproduction range was typically represented with a two-dimensional chromaticity
Setup Guide. AV Foundry VideoForge HDMI. Digital Video Generator. Rev. 1.1
Setup Guide AV Foundry VideoForge HDMI Digital Video Generator Rev. 1.1 Introduction The AV Foundry VideoForge HDMI Digital Video Generator is a versatile, high value test pattern generator with a field-ruggedized
Setup Guide. SpectraCal C6 HDR2000 Colorimeter. Rev. 1.2
Setup Guide SpectraCal C6 HDR2000 Colorimeter Rev. 1.2 Introduction The SpectraCal C6 HDR2000 Colorimeter is one of the most advanced light measurement devices available, providing the accuracy you need
Setup Guide. Klein K-10CP Colorimeter. Rev. 1.1
Setup Guide Klein K-10CP Colorimeter Rev. 1.1 Introduction Klein K-10CP Included Parts The K-10CP (Cinema Pro) is a reference class non-contact optical colorimeter with superb accuracy, the fastest read
Calibration Using i1 probe with CalMan and Resolve
20160526 Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA 30005 Phone: +1.678.835.4934 Fax: +1.678.804.1882 E-Mail: Support@FlandersScientific.com www.flandersscientific.com Please
User Manual. Rev. 1.3
User Manual Rev. 1.3 Table of Contents Introduction 3 Important Safety Information 4 Electrostatic Discharge (ESD) Protection 5 Key Features 6 What's in the Box 7 Control & Indicator Functions 8 HDMI System
AV Foundry VideoForge HDMI Digital Video Generator Quick Start Guide
AV Foundry VideoForge HDMI Digital Video Generator Quick Start Guide Thank you for purchasing an AV Foundry VideoForge HDMI Digital Video Generator, a versatile, high value test pattern generator with
Setup Guide. Rev. 1.7
Setup Guide By Rev. 1.7 Intrductin The SpectraCal VideFrge PRO test pattern generatr can be autmatically cntrlled by the CalMAN Display Calibratin Sftware t prduce measurement and calibratin test patterns
Palette Master Color Management Software
Palette Master Color Management Software How to Use Guide 01 Proprietary Calibration Software Co-developed with leading color calibration experts X-Rite, Palette Master software simplifies calibration
Achieve Accurate Color-Critical Performance With Affordable Monitors
Achieve Accurate Color-Critical Performance With Affordable Monitors Image Rendering Accuracy to Industry Standards Reference quality monitors are able to very accurately render video, film, and graphics
Achieve Accurate Critical Display Performance With Professional and Consumer Level Displays
Achieve Accurate Critical Display Performance With Professional and Consumer Level Displays Display Accuracy to Industry Standards Reference quality monitors are able to very accurately reproduce video,
Calibration Best Practices
Calibration Best Practices for Manufacturers By Tom Schulte SpectraCal, Inc. 17544 Midvale Avenue N., Suite 100 Shoreline, WA 98133 (206) 420-7514 info@spectracal.com http://studio.spectracal.com Calibration
What is the history and background of the auto cal feature?
What is the history and background of the auto cal feature? With the launch of our 2016 OLED products, we started receiving requests from professional content creators who were buying our OLED TVs for
So, how do I create LUTs for each one of the buttons on the remote?
Advanced Use of Prisma There are several papers and articles on LUTs and calibration that you can find on the Murideo web site. We'll start the discussion here by saying if you choose to optimize and maximize
FSI Calibration Guide Using I1 / LightSpace / Resolve
FSI Calibration Guide Using I1 / LightSpace / Resolve Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA 30005 Phone: +1.678.835.4934 Fax: +1.678.804.1882 E-Mail: Support@FlandersScientific.com
Using LightSpace CMS for User Created Calibration LUTs
20140130 Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA 30005 Phone: +1.678.835.4934 Fax: +1.678.804.1882 E-Mail: Support@FlandersScientific.com www.flandersscientific.com 1. If
FSI Calibration Guide Using CR100 / LightSpace / BoxIO
FSI Calibration Guide Using CR100 / LightSpace / BoxIO Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA 30005 Phone: +1.678.835.4934 Fax: +1.678.804.1882 E-Mail: Support@FlandersScientific.com
ICAC User Manual. ICAC - ( Intelligent Connection for Alignment & Calibration ) Setup Calibration Measurement USO RESTRITO. Version 14.2.
ICAC User Manual ICAC - ( Intelligent Connection for Alignment & Calibration ) Setup Calibration Measurement Version 14.2.1 INDEX 1- Introduction ----------------------------------- 3 2- Structure -------------------------------------
Quick Guide Book of Sending and receiving card
Quick Guide Book of Sending and receiving card ----take K10 card for example 1 Hardware connection diagram Here take one module (32x16 pixels), 1 piece of K10 card, HUB75 for example, please refer to the
Projector Management Application Version 7.00 Instruction Guide
Projector Management Application Version 7.00 Instruction Guide Contents 1 INTRODUCTION... 4 1.1 OUTLINE... 4 1.2 SYSTEM... 4 2 INSTALLATION... 5 2.1 SYSTEM REQUIREMENTS... 5 2.2 PROJECTOR MANAGEMENT APPLICATION
Instruction Manual. 1 Page
Instruction Manual 1 Page Introduction A reference pattern generator is an essential piece of equipment in the video calibration process. Most, if not all, certified and experienced calibrators utilize
Video wall Precautions when moving and handling. Precaution. Please adhere to the warning signs printed on the box.
Video wall Precaution 4-1. Precautions when moving and handling Please adhere to the warning signs printed on the box. Model: 47WV30MS 47WV30BR 47WV30BS 47WV30-BAAM 47WV30-BAAL 47WV50BR 47WV50MS 47LV35A
HD4112 Quad HDMI MPEG2 HD DVBT Encoder Modulator U S E R M A N U A L
HD4112 Quad HDMI MPEG2 HD DVBT Encoder Modulator U S E R M A N U A L HD4112 Manual Rev 1 Contents 1. GENERAL 1.1 Description 1.2 Specifications 2. INSTALLATION 2.1 What s in the Box 2.2 Connection 2.2.1
HD168Bi Quad CVBS/HDMI HD DVBT Encoder Modulator U S E R M A N U A L
HD168Bi Quad CVBS/HDMI HD DVBT Encoder Modulator U S E R M A N U A L Contents 1. GENERAL 1.1 Description 1.2 Specifications 2. INSTALLATION 2.1 What s in the Box 2.2 Connection 2.2.1 DEVICE Programming
Technical Paper WHY SHOULD YOU CALIBRATE?
Technical Paper WHY SHOULD YOU CALIBRATE? DISPLAY CALIBRATION 101 By Tom Schulte From the early days of television, the video industry has agreed upon standards for how video signals should be formed and
CLIPSTER. 3D LUT File Generation with the Kodak Display Manager. Supplement
Supplement: CLIPSTER 3D LUT File Generation with the Kodak Display Manager (Version 1.0) CLIPSTER 3D LUT File Generation with the Kodak Display Manager Supplement Supplement for the CLIPSTER Documentation:
Manual Version Ver 1.0
The BG-3 & The BG-7 Multiple Test Pattern Generator with Field Programmable ID Option Manual Version Ver 1.0 BURST ELECTRONICS INC CORRALES, NM 87048 USA (505) 898-1455 VOICE (505) 890-8926 Tech Support
User Manual. May 2005 AIN LIGHT
May 2005 AIN LIGHT This user manual is designed to help the operators and owners of Soft-LED products use, troubleshoot, and utilize all of the product s potential. Customers seeking additional help not
LG Electronics Monitor Proofing System with LG W2420R Display and Adobe Acrobat 8 Professional for GRACoL Coated #1
Off-Press Proof Application Data Sheet LG Electronics Monitor Proofing System with LG W2420R Display and Adobe Acrobat 8 Professional for GRACoL Coated #1 The IDEAlliance Print Properties Working Group
G406 application note for projector
G406 application note for projector Do you have trouble in using projector internal warp and edge blending function? Inconvenient in multiple signal source connection System resolution is not enough after
Portland Trail Blazers: CalMAN Display Calibration Case Study
The Moda Center, in downtown Portland, is home court for the Portland Trail Blazers By Tom Schulte Portland Trail Blazers: CalMAN Display Calibration Case Study Provided By SpectraCal, Inc. October 2016
Table of content. Table of content Introduction Concepts Hardware setup...4
Table of content Table of content... 1 Introduction... 2 1. Concepts...3 2. Hardware setup...4 2.1. ArtNet, Nodes and Switches...4 2.2. e:cue butlers...5 2.3. Computer...5 3. Installation...6 4. LED Mapper
EAN-Performance and Latency
EAN-Performance and Latency PN: EAN-Performance-and-Latency 6/4/2018 SightLine Applications, Inc. Contact: Web: sightlineapplications.com Sales: sales@sightlineapplications.com Support: support@sightlineapplications.com
Omega 4K/UHD Three-Input Switcher. Introduction. Applications. for HDMI and USB-C with HDBaseT and HDMI Outputs
Introduction The Atlona AT-OME-ST31 is a 3 1 switcher and HDBaseT transmitter with HDMI and USB-C inputs. It features mirrored HDMI and HDBaseT outputs and is HDCP 2.2 compliant. The USB-C input is ideal
In-situ Port Cal for Dual Carriages Tuner
In-situ Port Cal for Dual Carriages Tuner In-Situ port cal method is the calibration technique mainly for cascaded tuners or multi-carriage tuner. Unlike in-situ system cal which requires 2 VNA calibrations
The absolute opposite of ordinary
The absolute opposite of ordinary G408 4K/60 vido wall controller 2x HDMI 2.0 in, 8x FHD out 10-bit processor 4:4:4 Chroma sampling Independent rotation/ scaling/ cropping Also serve as two Quad channel
Configuring Satellite RFSD-2XA For RF Signal Monitoring
Configuring Satellite RFSD-2XA For RF Signal Monitoring 1. Set your Options a. From Monitoring Menu screen, select Monitor Setup and press Enter. b. From Monitor Setup menu screen, select Options, and
Operation Guide Version 1.0, December 2015
Operation Guide Version 1.0, December 2015 Document Revision History Revision Date Description v1.0 January 8, 2016 Initial release of COLR Operation Manual, based on firmware version 1.0.1 CONTENTS Contents...
NEC MultiSync PA Series Wide Gamut LED-backlit color accurate desktop displays
NEC MultiSync PA Series Wide Gamut LED-backlit color accurate desktop displays Color Accurate Professional Desktop 24" 30 Color accuracy that you can trust. The 24 PA242W-BK, 30 PA302W-BK and PA302W in
More Skills 14 Watch TV in Windows Media Center
M05_TOWN5764_01_SE_SM5.QXD 11/24/10 1:08 PM Page 1 Chapter 5 Windows 7 More Skills 14 Watch TV in Windows Media Center You can watch and record broadcast TV in Windows Media Center. To watch and record
Control Application Guide Version 4.0. Revision History. Revision Date Page(s) Changed Description of Change 4/2009 All pages First edition released.
3M Digital Projector Control Application Guide Version 4.0 Revision History Revision Date Page(s) Changed Description of Change 4/2009 All pages First edition released. Intended Use The 3M Digital Projectors
SXGA096 DESIGN REFERENCE BOARD
SXGA096 DESIGN REFERENCE BOARD For Use with all emagin SXGA096 OLED Microdisplays USER S MANUAL VERSION 1.0 TABLE OF CONTENTS D01-501152-01 SXGA096 Design Reference Board User s Manual i 1. INTRODUCTION...
2G Video Wall Guide Just Add Power HD over IP Page1 2G VIDEO WALL GUIDE. Revised
2G Video Wall Guide Just Add Power HD over IP Page1 2G VIDEO WALL GUIDE Revised 2016-05-09 2G Video Wall Guide Just Add Power HD over IP Page2 Table of Contents Specifications... 4 Requirements for Setup...
MultiScopeLite. Users Guide. Video Measurement and Calibration Tools. RHMG Software Tools Library 1/18/2013. Bill and Scott Werba
MultiScopeLite Video Measurement and Calibration Tools Users Guide RHMG Software Tools Library 1/18/2013 Authors: Bill and Scott Werba Developer: Scott Werba Document ID: 3000-001 Revision: v1.0.4 Publication
NOTICE: This document is for use only at UNSW. No copies can be made of this document without the permission of the authors.
Brüel & Kjær Pulse Primer University of New South Wales School of Mechanical and Manufacturing Engineering September 2005 Prepared by Michael Skeen and Geoff Lucas NOTICE: This document is for use only
V pro8 QUICK START GUIDE
QUICK START GUIDE Welcome to your V pro8 FIRST STEPS POWERING ON CONNECTING YOUR COMPUTER Thank you for buying the Lawo V pro8, a true high-quality product developed and manufactured in Rastatt, Germany.
Transmitter Interface Program
Transmitter Interface Program Operational Manual Version 3.0.4 1 Overview The transmitter interface software allows you to adjust configuration settings of your Max solid state transmitters. The following
Supplement to the Operating Instructions. PRemote V 1.2.x. Dallmeier electronic GmbH. DK GB / Rev /
Supplement to the Operating Instructions PRemote V 1.2.x 1 DK 180.000.000 GB / Rev. 1.2.3 / 030416 PRemote V 1.2.x Copyright All rights reserved. This document may not be copied, photocopied, reproduced,
KV-901T & AV-901R. Quick Guide
KV-901T & AV-901R Quick Guide This quick guide provides basic information only, for a complete version of user s manual please down load at: http://www.avextender.com/comm/upfile/p_110913_ 04468.pdf Copyright
Operation Guide Version 2.0, December 2016
Operation Guide Version 2.0, December 2016 Document Revision History Revision Date Description v1.0 January 8, 2016 Initial release of COLR Operation Manual, based on firmware version 1.0.1 CONTENTS Contents...
RF Mogul. Quick Start. Model: SDC1. Satellite Dish Controller
RF Mogul Satellite Dish Controller Model: SDC1 Quick Start 29 February 2012 Minimum required hardware to find a Satellite! This Quick Start document is for connecting and operating a General Dynamics C125M
C Module Description
IQMMX -Input Router & ASI Distribution Amplifier C Module Description The IQMMX is an ASI to 1 switch, distribution amplifier and transport stream switcher with up to 8 outputs in double width form or
BoxIO User Manual Updated Applies to BoxIO Firmware Version 1.51 IP Remote Utility Version 1.0
BoxIO User Manual Updated 09.25.2017 Applies to BoxIO Firmware Version 1.51 IP Remote Utility Version 1.0 Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA. 30005 Phone: +1.678.835.4934
NEC MultiSync PA Series with SpectraView II
Professional Desktop NEC MultiSync PA Series with Color calibration solution ideal for color-critical applications Thoughtfully designed and individually factory calibrated to deliver reliable, accurate
APM CALIBRATION PROCEDURE Rev. A June 3, 2015
APM CALIBRATION PROCEDURE Rev. A June 3, 2015 Calibration of the APM allows system parameters such as coupler coupling values, interconnecting cable losses and system feeder losses to be programmed into
AUDI WITH MMI A4/A5/A6/A8/Q7. -. Product Code : A4L
AUDI WITH MMI A4/A5/A6/A8/Q7 -. MODEL: QVL-A4L-V6 -. Product Code : A4L-0904-223 -Precaution - You must keep the car key taken off from the car while you work this and finally, connect power of the interface.
CM-392-Video to HDMI Scaler Box ID#481
CM-392-Video to HDMI Scaler Box ID#481 Operation Manual Introduction CM-392-Video to HDMI Scaler Box is designed to convert Composite and S-Video to Digital HDMI in a variety of HDTV resolutions. It handles
car-solutions.com GVIF Interface v7 for Nissan & Infiniti Specification Release date : Model : QVL-GF08-V7 / Product code : GF
Release date : 2011.07.04 Model : QVL-GF08-V7 / Product code : GF08-1106-004 GVIF Interface v7 for Nissan & Infiniti Specification www. support@carsolutions.com.ua Contents 1. Before installation 1.1 Main
HD-1603 Single Input MPEG-4 DVB-T HD Encoder/Modulator User Guide and Install Manual
ZyCastR digi-mod HD Range digi-mod HD-1603 www.digi-modbyzycast.com HD-1603 Single Input MPEG-4 DVB-T HD Encoder/Modulator User Guide and Install Manual Table of Contents www.digi-modbyzycast.com Safety
Scan Converter Installation Guide
Scan Converter Installation Guide Software on supplied disks Please note: The software included with your scan converter is OPTIONAL. It is not needed to make the scan converter work properly. This software
Addendum to Installation Guide
February 2010 900449-001 Rev. 0 Applicability Addendum to Installation Guide System Enhancements & Modifications This document is applicable to the components or categories listed below: Software Hardware
Marshall Electronics. Operating Instructions. Warranty. Model No. QVW Quad-Viewer Monitor with 4K Format Support
Warranty Marshall Electronics warranties to the first consumer that this QVW-2710 LCD monitor will, under normal use, be free from defects in workmanship and materials, when received in its original container,
Wall Ball Setup / Calibration
Wall Ball Setup / Calibration Wall projection game 1 Table of contents Wall Projection Ceiling Mounted Calibration Select sensor and display Masking the projection area Adjusting the sliders What s happening?
VSP 198CVS Quick Start
VIEWSIZE THE WORLD VSP 198CVS Quick Start Max 2048 1152@60Hz/2560 1152 50Hz input/output resolution User customize output resolution 3G/HD/SD-SDI input Multiple cascade mapping for super resolution DVI
Yaesu FT-950 and FT-450D with KPA/KAT500 Power Combo
Yaesu FT-950 and FT-450D with KPA/KAT500 Power Combo The Yaesu FTdx1200, FT-450D and FT-950 series radio can be connected to the KAT/KPA500 combo using the Key signal available on the rear panel of the
Installation & Operational Manual
Radiant Communications Corporation 5001 Hadley Road South Plainfield NJ 07080 Tel (908) 757-7444 Fax (908) 757-8666 WWW.RCCFIBER.COM QRF5000M MDU ENCODER Installation & Operational Manual Rev.A2 1. Introduction
C Module Description
ASI Distribution Amplifier with Signal Inversion C Module Description The is an ASI distribution amplifier with up to 8 outputs in double width or 4 outputs in single width. The input is transformer coupled
Scan Converter Quick Installation Guide
Scan Converter Quick Installation Guide Software Note: No software is required to use your scan converter. Please complete the hardware installation and system setup before you determine the need to the
Video to DVI 1080p Scaler Box - ID# 796
Video to DVI 1080p Scaler Box - ID# 796 Operation Manual Introduction Video to DVI 1080p Scaler Box is an upgraded design to convert Standard Definition Composite Video (CV) and S-Video (SV) signals to
CCE900-IP-TR. User s Guide
CCE900-IP-TR CCE900-IP-T & CCE900-IP-R User s Guide i-tech Company LLC TOLL FREE: (888) 483-2418 EMAIL: info@itechlcd.com WEB: www.itechlcd.com 1. Introduction The CCE900-IP-T & CCE900-IP-R is a solution
HDMI 2.0 Multiview Video Processor
Product Data HDMI 2.0 Multiview Video Processor VP-QV41 Introduction The Partilink VP-QV41 Multiview Video Processor is a simple, cost-effective video scaler designed to enable a 4K@60Hz, HD, SD computer
The absolute opposite of ordinary
The absolute opposite of ordinary G406Lite 4K/60 video wall controller 1 in / 4 out in one box, HDMI 2.0 / HDCP 2.2 input up to DCi/UHD 4K/60 fps, 10-bit processor, 4:4:4 Chroma sampling, Independent rotation/
Quick Start Guide. Multidimensional Imaging
Quick Start Guide Multidimensional Imaging Printed 11/2012 Multidimensional Imaging Content Quick Start Guide Content 1 Introduction 4 2 Set up multi-channel experiments 5 2.1 Set up a new experiment
First Time Setup Guide
First Time Setup Guide www.exhibio.com 1.877.EXHIBIO (394.4246) Exhibio ST-200 Components & Accessories Standing Mount TV Tuner with Input Cable (USB 2.0 only) VESA Mount Over-the-Air Antenna Power Adapter
SX Series with TRC6 Remote Control User Guide
SX Series with TRC6 Remote Control User Guide Rev 11May2017 Page 1 of 19 OVERVIEW.... 3 BASIC NAVIGATION.... 4 GENERAL USE.... 5 Setup... 5 Microphone.... 6 Volume.... 6 Site to Site Calls.... 7 Connecting
Blackmagic SmartView 4K The world s rst full resolution Ultra HD broadcast monitor with 12G-SDI
Blackmagic SmartView 4K The world s rst full resolution Ultra HD broadcast monitor with 12G-SDI SmartView 4K is the world s rst full resolution rack mount Ultra HD broadcast monitor with 12G-SDI for native