Page: 1 of 15 FCC TEST REPORT. : MEGAVIEW DIGITECH LIMITED : C Fu Gui Yuan, Block 80, Bao an District, Shenzhen, China

Transcription

1 Page: 1 of 15 FCC TEST REPORT Reference No. Applicant Address : WT S-E-F : MEGAVIEW DIGITECH LIMITED : C Fu Gui Yuan, Block 80, Bao an District, Shenzhen, China Equipment Under Test (EUT) : Product Name : DV MP3 Sunglasses Standards : FCC 15 SUBPART B Date of Test : Dec. 23, 2010 Test Engineer Reviewed By : Tenny.xu : Philo.Zhong Test Result : PASS * Prepared By: Waltek Services (Shenzhen) Co., Ltd. 1/F, Fukangtai Building, West Baima Rd., Songgang Street, Baoan District, Shenzhen , China Tel : Fax: * The sample detailed above has been tested to the requirements of Council Directives ANSI C63.4:2003. The test results have been reviewed against the Directives above and found to meet their essential requirements.

2 Page:2 of 15 1 Test Summary Test Test Requirement Test Method Class / Severity Result Radiated Emission (30MHz to 1GHz) Conducted Emission (150KHz to 30MHz) FCC PART 15, SUBPART B: 2008 FCC PART 15, SUBPART B: 2008 ANSI C63.4: 2003 Class B PASS ANSI C63.4: 2003 Class B N/A

3 Page:3 of 15 2 Contents 1 COVER PAGE TEST SUMMARY CONTENTS GENERAL INFORMATION CLIENT INFORMATION DETAILS OF E.U.T DESCRIPTION OF SUPPORT UNITS STANDARDS APPLICABLE FOR TESTING TEST FACILITY TEST LOCATION EQUIPMENT USED DURING TEST EMISSIONS TEST RESULTS RADIATION EMISSION DATA Measurement Uncertainty EUT Setup Spectrum Analyzer Setup Test Procedure Corrected Amplitude & Margin Calculation Summary of Test Results Photograph-Test Setup PHOTOGRAPHS - CONSTRUCTIONAL DETAILS EUT FRONT VIEW EUT BACK VIEW EUT OPEN VIEW PCB FRONT VIEW PCB BACK VIEW FCC LABEL... 15

4 Page:4 of 15 3 General Information 3.1 Client Information Applicant: Applicant Address: MEGAVIEW DIGITECH LIMITED C Fu Gui Yuan, Block 80, Bao an District, Shenzhen, China Manufacturer: MEGAVIEW DIGITECH LIMITED Address of Manufacturer: C Fu Gui Yuan, Block 80, Bao an District, Shenzhen, China Product Name: Model No.: DV MP3 Sunglasses MV300 MEGASIGHT 3.2 Details of E.U.T. Power Supply: DC 5V 3.3 Description of Support Units The EUT has been tested as an independent unit Standards Applicable for Testing The customer requested FCC tests for a DV MP3 Sunglasses. The standards used was FCC PART 15 SUBPART B.

5 Page:5 of Test Facility The test facility is recognized, certified, or accredited by the following organizations: FCC Registration No.: Waltek Services(Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration No.:880581, June 24, IC Registration No.: 7760A Waltek Services(Shenzhen) Co., Ltd. has been registered and fully described in a report filed with the Industry Canada. The acceptance letter from the Industry Canada is maintained in our files. Registration No.:7760A, Aug. 3, Test Location All Emission tests were performed at:- Waltek Services(Shenzhen) Co., Ltd. at 1/F, Fukangtai Building, West Baima Rd.,Songgang Street, Baoan District, Shenzhen, China

6 Page:6 of 15 4 Equipment Used during Test Equipment Brand Name Model 3m Anechoic chamber EMC Analyzer Agilent E7405A Trilog Broadband Antenne MHz Broad-band Horn Antenna 1-18 GHz Broadband Preamplifier GHz 10m Coaxial Cable with N-male Connectors usable up to 18GHz, 10m 50 Ohm Coaxial Cable with N-plug, individual length,usable up to 3(5)GHz, Connectors SCHWARZBEC K MESS- ELEKTROM SCHWARZBEC K MESS- ELEKTROM SCHWARZBEC K MESS- ELEKTROM SCHWARZBEC K MESS- ELEKTROM SCHWARZBEC K MESS- ELEKTROM VULB9163 BBHA 9120 D BBV 9718 AK 9515 H AK 9513 Related standards : 2000 DIN EN DIN EN DIN EN DIN EN DIN EN Cal.Intal Months Last Cal. Date 12 Aug-10 Cert No 1GA Aug Aug Serial No MY Aug Aug Aug-10 - Positioning Controller C&C LAB CC-C-IF 12 Aug-10 MF Color Monitor SUNSPO SP-14C 12 Aug-10 - EMI Shielded Room Test Receiver ROHDE&SCH 1GA09003 ESCI 12 Aug-10 WARZ Two-Line V-Network V-LISN Absorbing Clamp 10m 50 Ohm Coaxial Cable with N-plug, individual length,usable up to 3(5)GHz, Connectors PC PC ROHDE&SCH WARZ SCHWARZBEC K MESS- ELEKTRONIK ROHDE&SCH WARZ SCHWARZBEC K MESS- ELEKTROM ACER LENOVO ENV216 NSLK 8128 MDS-21 AK 9514 CISPR EN :2004+A1:2 005+A2:200 6 DIN EN 12 Aug Aug Aug-10 1GA GA GB Aug

7 Page:7 of 15 5 Emissions Test Results 5.1 Radiation Emission Data Test Requirement: FCC Part15 B Test Method: ANSI C63.4:2003 Test Date: Dec.23, 2010 Frequency Range: 30MHz to 1GHz Measurement Distance: 3m Class: Class B Limit: 40.0 dbμv/m between 30MHz & 88MHz 43.5 dbμv/m between 88MHz & 216MHz 46.0 dbμv/m between 216MHz & 960MHz 54.0 dbμv/m zbove 960MHz Detector: Peak for pre-scan (120kHz resolution bandwidth) Quasi-Peak if maximised peak within 6dB of limit Measurement Uncertainty All measurements involve certain levels of uncertainties, especially in the field of EMC. The factors contributing to uncertainties are spectrum analyzer, cable loss, antenna factor calibration, antenna directivity, antenna factor variation with height, antenna phase center variation, antenna factor frequency interpolation, measurement distance variation, site imperfections, mismatch (average), and system repeatability. Based on NIS 81, The Treatment of Uncertainty in EMC Measurements, the best estimate of the uncertainty of a radiation emissions measurement at Waltek EMC Lab is ±5.03 db.

8 Page:8 of EUT Setup The radiated emission tests were performed in the 3m Semi-Anechoic Chamber test site,using the setup accordance with the ANSI C63.4:2003, The specification used in this report was the FCC Part15 B limits Spectrum Analyzer Setup According to FCC Part15 B Rules, the system was tested 30 to 1000MHz. Start Frequency...30 MHz Stop Frequency...1 GHz Sweep Speed Auto IF Bandwidth KHz Video Bandwidth...100KHz Quasi-Peak Adapter Bandwidth KHz Quasi-Peak Adapter Mode...Normal Resolution Bandwidth...100KHz

9 Page:9 of Test Procedure For the radiated emissions test. Maximizing procedure was performed on the six (6) highest emissions to ensure EUT is compliant with all installation combinations. All data was recorded in the peak detection mode. Quasi-peak readings was performed only when an emission was found to be marginal (within -4 dbμv of specification limits), and are distinguished with a "Qp" in the data table. But any frequency above 1000 MHz, the limit is based on average detector. The EUT was under normal mode during the final qualification test and the configuration was used to represent the worst case results. Compliance test was performed in MP3 mode, DC mode and U-disk mode. While MP3 mode had the worst test result which was shown below Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Factor, and subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows: Corr. Ampl. = Indicated Reading + Antenna Factor + Cable Factor - Amplifier Gain The Margin column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of -7dBμV means the emission is 7dBμV below the maximum limit for Class B. The equation for margin calculation is as follows: Margin = Corr. Ampl. Class B Limit Summary of Test Results According to the data in this section, the EUT complied with the FCC Part15 B standards.

10 Page:10 of 15 Horizontal Vertical

11 Page:11 of Photograph-Test Setup

12 Page:12 of 15 6 Photographs - Constructional Details 6.1 EUT Front View 6.2 EUT Back View

13 Page:13 of EUT Open View

14 Page:14 of PCB Front View 6.5 PCB Back View

15 Page:15 of 15 7 FCC Label This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)this device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable.