FCC Test Report. Color LCD Monitor

Size: px

Start display at page:

Download "FCC Test Report. Color LCD Monitor"

Herbert Jenkins
5 years ago
Views:

1 Underwriters Laboratories Inc. Project: 10CA46552 File: TC8352 Report: 10CA46552-FCC Date: October 13, 2010 Model: EX190W (Basic), RadiForce EX190W FCC Test Report For Color LCD Monitor FCC Certification Part 15 Subpart B Class B EIZO NANAO CORPORATION 153 Shimokashiwano, Hakusan, Ishikawa Japan Copyright 2005 Underwriters Laboratories Inc. Underwriters Laboratories Inc. authorizes the above-named company to reproduce this Report provided it is reproduced in its entirety. UL Korea, Ltd A not-for-profit organization dedicated 33 rd FL, Gangnam Finance Center, 737 to public safety and committed to Yeoksam-dong, Gangnam-gu, Seoul quality service for over 100 years Korea

Project Number: 10CA46552 File Number TC8352 Page 2 of 28 Summary of Test Results: The following tests were performed on a sample submitted for evaluation of compliance with 47CFR Part 15.

109(g) Test Test Name Compliant Not Compliant See Remark # Test Requirement/Specification 1 AC Power line Conducted Emission Test X - - 2 Radiated Emission Test X - - Conclusion: The tests listed in

2 Project Number: 10CA46552 File Number TC8352 Page 2 of 28 Summary of Test Results: The following tests were performed on a sample submitted for evaluation of compliance with 47CFR Part (a) / 47CFR Part (g) Test Test Name Compliant Not Compliant See Remark # Test Requirement/Specification 1 AC Power line Conducted Emission Test X Radiated Emission Test X - - Conclusion: The tests listed in the Summary of Testing section of this report have been performed as a witness testing and the results recorded by UL Korea Ltd. in accordance with the procedures stated in each test requirement and specification. The test list was determined by the Applicant as being applicable to the Equipment Under Test. As a result, the subject product has been verified to comply or not comply as noted in the Summary of Testing with each test specification. The test results relate only to the items tested. The equipment under test has Met the technical requirements Not met the technical requirements Tested by Sung Hoon Baek, Project Engineer Reviewed by Jea Woon Choi, Senior Project Engineer Conformity Assessment Services 3014ASEO Conformity Assessment Services 3014ASEO UL Korea Ltd. UL Korea Ltd. October 13, 2010 October 13, 2010

3 Project Number: 10CA46552 File Number TC8352 Page 3 of 28 Test Report Details Tests Performed By: Test Site: Applicant: Manufacturer: Factory: Applicant Contact: Wataru Takashima Title: Manager Phone: takasima@eizo.co.jp Product Type: Trademark: UL Korea Ltd. 33 rd FL. GFC Bldg. 737 Yeoksam-dong, Kangnam-ku, Seoul, , Korea CHUNGBUK TECHNOPARK Yangcheong-ri, Ochang-eub,Cheongwon-kun,Chungbuk-province,Republic of Korea The test facility was deemed to have the environment and capabilities necessary to perform the tests included in the test package. EIZO NANAO CORPORATION 153 Shimokashiwano, Hakusan, Ishikawa Japan EIZO NANAO CORPORATION 153 Shimokashiwano, Hakusan, Ishikawa Japan D&T Inc JANG-DONG, YUSEONG-GU, DAEJEON KOREA Color LCD Monitor Model Number: Multilisting model number: EX190W RadiForce EX190W, FCC ID Product standards: Sample Serial Number: The manufacturer has declared to all the multiple model names into the basic model without any further evaluation by UL. GCJEX190W FCC Part 15 Subpart B Class B N/A Sample Receive Date: January 29, 2010 Testing Start Date: January 29, 2010 Date Testing Complete: May 06, 2010 Test Report Date: October 13, 2010 Overall Results: Pass UL Korea Ltd. reports apply only to the specific samples tested under stated test conditions. All samples tested were in good operating condition throughout the entire test program. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. UL Korea Ltd. shall have no liability for any deductions, inferences or generalizations drawn by the client or others from UL Korea Ltd. issued reports.

4 Project Number: 10CA46552 File Number TC8352 Page 4 of 28 REPORT DIRECTORY 1. GENERAL PRODUCT DESCRIPTION REPORT REVISION HISTORY EQUIPMENT DESCRIPTION DETAILS OF TEST EQUIPMENT (EUT) TECHNICAL DATA EUT INTERNAL OPERATING FREQUENCY TECHNICAL DESCRIPTIONS AND DOCUMENTS EQUIPMENT MARKING PLATE: 6 2. TEST CONDITION EQUIPMENT USED DURING TEST: POWER INTERFACE: INPUT/OUTPUT PORTS: TEST MODE OF LCD COLOR DISPLAY MONITOR FOR TEST: TEST RESOLUTION OF LCD COLOR DISPLAY MONITOR FOR TEST: USED DC EXTENSION CABLE FOR TEST: TEST CONFIGURATION FOR VGA MODE: TEST CONFIGURATION FOR COMPONENET MODE: TEST CONFIGURATION OF EXTENSION CABLE: TEST CONDITION AND RESULTS MAINS TERMINAL DISTURBANCE VOLTAGE TEST RADIATED DISTURBANCE 18

5 Project Number: 10CA46552 File Number TC8352 Page 5 of GENERAL PRODUCT DESCRIPTION 1.1 Report Revision History Revision Date Description Remarks Revision reviewed By - Original Report Equipment Description Description: The EX190W is intended for use by general surgeons, gynecologists, urologists, thoracic, orthopedic, ENT, and plastic surgeons adequately trained in these surgical procedures. 1.3 Details of Test Equipment (EUT) Equipment Configuration: No. Product Type Manufacturer Model Comments 1 19 LCD COLOR EIZO NANAO EX190W - MEDICAL MONITOR CORPORATION 2 AC/DC Adapter BridgePower Corp. JMW1100KA1800F** 1 EA 3 DC Extension Cable BridgePower Corp. CB ft 4 DC Extension Cable BridgePower Corp. CB ft 5 DC Extension Cable BridgePower Corp. CB ft 6 DVI-D cable EA 7 HD15 VGA cable EA 8 Hospital-grade AC power EA cord 9 Composite Video BNC EA Jack Cable 10 Super Video Cable EA 1.4 Technical Data Item LCD Panel Resolution Description 19 TFT LCD Panel 1680 x 60Hz Input Signal (Analog & Digital) DVI, HD15, SD/HD-SDI 1 and 2, Component Y/G, Pb/B, Pr/R, H/CS, VS, C- Video and S-Video Display Size 16.1 x 10.1 (409.5mm x mm) Power Source Display Monitor: DC 18V 6.67A AC-Adapter: AC100~240V 50/60Hz, 1.4~0.6A

Project Number: 10CA46552 File Number TC8352 Page 6 of 28 1.5 EUT Internal operating frequency Frequency (MHz) Description Frequency (MHz) Description 324.00 MHz Memory Clock 27.

6 Project Number: 10CA46552 File Number TC8352 Page 6 of EUT Internal operating frequency Frequency (MHz) Description Frequency (MHz) Description MHz Memory Clock MHz System Clock MHz Display Clock MHz System Clock 1.6 Technical descriptions and documents No. Document Title and Description 1 EX190W User Manual Note: The manufacturer provided the following document. 1.7 Equipment Marking Plate

7 Project Number: 10CA46552 File Number TC8352 Page 7 of TEST CONDITION 2.1 Equipment Used During Test: Use* Product Type Manufacturer Model Comments EUT EIZO NANAO EX190W - 19 Color LCD Monitor CORPORATION EUT AC/DC Adapter BridgePower Corp. JMW1100KA1800F** - EUT D.C. Extension Cable BridgePower Corp. CB ft EUT D.C. Extension Cable BridgePower Corp. CB ft EUT D.C. Extension Cable BridgePower Corp. CB ft AE PC DELL OPTIPLEX 755 AE Headset PILLAR CH AE Printer SAMSUNG ML-2250G - AE USB mouse LOGITECH M-BJ58 - AE USB Keyboard DELL L30U - AE Video Signal Generator Quantum data 881 Used for SDI mode AE Pattern generator Chroma Used for C-video, S- Video, Component mode AE LCD Monitor EIZO NANAO CORPORATION EX190W Used for External monitor AE AC/DC Adapter BridgePower Corp. JMW1100KA1800F** Connected with External monitor * Note: EUT -Equipment Under Test, AE -Auxiliary/Associated Equipment, SIM -Simulator (Not Subjected to Test) 2.2 Power Interface: Mode # Voltage (V) Current (A) Power (W) Frequency (DC/AC-Hz) Rated Vac 2.0 A V Comments

8 Project Number: 10CA46552 File Number TC8352 Page 8 of Input/Output Ports: Port Name Type* Cable Cable Comments # Max. >3m Shielded 1 Mains AC 1.8 m Unshielded Hospital-grade AC power cord 2 DVI In I/O 1.8 m Shielded 24 pin DVI-D 3 VGA In I/O 1.8 m Shielded 15 pin D-Sub 4 SDI In, Out I/O 1.8 m Shielded BNC 5 S-Video In, Out I/O 1.8 m Shielded S-Video 6 C-Video In, Out I/O 1.8 m Shielded BNC 7 Component In, Out I/O 1.8 m Shielded BNC Note: *AC = AC Power Port, DC = DC Power Port, N/E = Non-Electrical, I/O= Signal Input or Output Port (Not Involved in Process Control), TP = Telecommunication Ports. * RS-232 port is used for service purpose only. No user interface port 2.4 Test Mode of LCD Color Display Monitor for Test: Mode # Mode Comments 1 DVI Mode - 2 VGA Mode Worst case condition 3 SDI In/Out Mode - 4 S-VIDEO In/Out Mode - 5 C-Video In/Out Mode - 6 Component In/Out Mode Worst case condition Note: 1. All the configuration described above has been investigated during the preliminary testing and selected two cases as worst-case condition for final measurements. 2. EUT have been performed under continuous displaying H Patten for configuration modes of 1 to EUT has been performed under continuous displaying Color Bar Patten for configuration modes of 3 to Test Resolution of LCD Color Display Monitor for Test: 1 Mode # Resolution Comments 640 * 60Hz - 2 VGA Mode 1024 * 60Hz Worst case condition * 60Hz - 4 Component Mode 1080i Worst case condition Note: Video resolution where it refers from above is representative worst case.

9 Project Number: 10CA46552 File Number TC8352 Page 9 of Used DC extension Cable for Test: No. Cable Length Preliminary Test Comment 1 5ft DVI, VGA, SDI, S-Video, ft C-Video, Component Mode ft Worst case condition Note: Radiated emission and conducted emission test were performed for all extension power cable during the preliminary testing and selected worst-case condition for final measurements. 2.7 Test Configuration for VGA Mode: Mode 1 VGA Mode Adapter Adapter Printer 19 LCD COLOR MEDICAL MONITOR (EUT) PC Head Set, USB mouse, USB Keyboard

10 Project Number: 10CA46552 File Number TC8352 Page 10 of Test Configuration for Component In, Out Mode: Mode 2 Component In, Out Mode Adapter Adapter External Monitor 19 LCD COLOR MEDICAL MONITOR (EUT) Patten generator 2.9 Test configuration of Extension cable: Test configuration

11 Project Number: 10CA46552 File Number TC8352 Page 11 of TEST CONDITION AND RESULTS 3.1 Mains Terminal Disturbance Voltage Test Method Parameters recorded during the test TEST: Limits of mains terminal disturbance voltage Measurements were made on a ground plane that extends 1-meter minimum beyond all sides of the system under test. All power was connected to the system through Artificial Mains Network (AMN). Conducted voltage measurements on mains lines were made at the output of the AMN. Laboratory Ambient Temperature 18.6 C Relative Humidity 39.1 % - Frequency range on each side of line Measurement Point Fully configured sample scanned over the following frequency range Frequency (MHz) 150 khz to 30 MHz A. C. Input Power port of Adapter. Limits - Class B Limit (dbµv) Quasi-Peak Result Average Result 0.15 to to 56 Pass 56 to 46 Pass 0.50 to 5 56 Pass 46 Pass 5 to Pass 50 Pass Power Interface Mode # (See Section 2.3) EUT Configuration Settings: EUT Operation Mode # (See 2.4) EUT Configurations Mode # (See Section 2.7) 1 2 and 4 1 and 2 Conducted Emissions Test Equipment used: Description Manufacturer Model Identifier Cal. Due Test Receiver Rohde & Schwarz ESPI LISN Rohde & Schwarz ESH2-Z LISN Schwarzbeck NNLK

12 Project Number: 10CA46552 File Number TC8352 Page 12 of 28 Figure 1. Conducted Emission Test Setup VGA mode

13 Project Number: 10CA46552 File Number TC8352 Page 13 of 28 Figure 2. Conducted Emission Test Setup Component In, Out Mode

14 Project Number: 10CA46552 File Number TC8352 Page 14 of 28 Figure 3. Graphical representation of conducted emissions, VGA Mode VGA Mode, Hot Line Single phase_l1_class B Voltage on Mains QP Class B 50 Voltage on Mains AV Class B Level in dbuv k M 2M 3M 4M 5M M 20M 30M Frequency in Hz VGA Mode, Neutral Line Single phase_n_class B Voltage on Mains QP Class B 50 Voltage on Mains AV Class B Level in dbuv k M 2M 3M 4M 5M M 20M 30M Frequency in Hz

15 Project Number: 10CA46552 File Number TC8352 Page 15 of 28 Figure 4. Graphical representation of conducted emissions, COMPONENT In, Out Mode Component In, Out Mode, Hot Line Single phase_l1_class B Voltage on Mains QP Class B 50 Voltage on Mains AV Class B Level in dbuv k M 2M 3M 4M 5M M 20M 30M Frequency in Hz Component In, Out Mode, Neutral Line Single phase_n_class B Voltage on Mains QP Class B 50 Voltage on Mains AV Class B Level in dbuv k M 2M 3M 4M 5M M 20M 30M Frequency in Hz

16 Project Number: 10CA46552 File Number TC8352 Page 16 of 28 Table 1. Test data for conducted emission, VGA Mode Test Frequency (MHz) Correction Factor Reading value (dbuv) Level (dbuv) Limit (dbuv) Margin (db) Line Cable LISN QP AV QP AV QP AV QP AV H N H N N H H H H H H H H H Note: 1. Margin (db)= Limit (dbuv) - Level (dbuv) 2. If no frequencies are specified in the tables, no measurement for quasi-peak or average was necessary.

17 Project Number: 10CA46552 File Number TC8352 Page 17 of 28 Table 2. Test data for conducted emission, Component In, Out Mode Test Frequency (MHz) Correction Factor Reading value (dbuv) Level (dbuv) Limit (dbuv) Margin (db) Line Cable LISN QP AV QP AV QP AV QP AV N N H N N H N N H N N H Note: 1. Margin (db)= Limit (dbuv) - Level (dbuv) 2. If no frequencies are specified in the tables, no measurement for quasi-peak or average was necessary.

18 Project Number: 10CA46552 File Number TC8352 Page 18 of Radiated disturbance Method Parameters recorded during the test TEST: Limits for radiated disturbance A pretest was performed at 3m distances in an anechoic screened enclosure, scanning the frequency range, and locating any frequencies at the which EUT radiated. Frequency scans were conducted with a peak detector with horizontal and vertical polarization of the antenna. Measurements were done in the frequency range MHz. The main test was then conducted by measurements at each frequency found in the pretest. These measurements were done at an open area test site at 10m distances, with a quasi-peak detector. EUT was positioned on a wooden table 0.8m above the floor, at the edge of the turntable. Cables connected to EUT were fixed to cause maximum emission. A maximum emitting point for each frequency was found by turning EUT degrees, and adjust the antenna height between 1-4m. Laboratory Ambient Temperature 18.9 C Relative Humidity 38.5 % - Frequency range Measurement Point Fully configured sample scanned over the following frequency range Frequency (MHz) 30 MHz 2.0 GHz 10 meter measurement distance Quasi-Peak Limits Class B Limit (dbμv/m) 30 to Pass 230 to Pass 1000 to (Average), 74 (Peak) at 3 m Pass Power Interface Mode # (See Section 2.3) EUT Configuration Settings: EUT Operation Mode # (See 2.4) Results EUT Configurations Mode # (See Section 2.7) 1 2 and 6 1 and 2 Radiated Emissions Test Equipment: Description Manufacturer Model Identifier Cal. Due Test Receiver Rohde & Schwarz ESIB BiconiLog ANT Schaffner CBL6112D Horn Antenna Schwarzbeck BBHA9120D 9120D

19 Project Number: 10CA46552 File Number TC8352 Page 19 of 28 Figure 5. Photo of Radiated emission test setup, 30 MHz to 1000 MHz VGA Mode

20 Project Number: 10CA46552 File Number TC8352 Page 20 of 28 Figure 6. Graphical representation, 30 MHz to 1000 MHz VGA Mode Electric Field Strength with Sweeps_Prescan(VH)-1 data reduction Class B Level in dbuv/m Electric Field Strength 10 m QP Class B M M G Frequency in Hz Table 3. Radiated emission Test data, VGA Mode, 30 MHz to 1000 MHz Test Frequency (MHz) Meter Reading (dbuv) Detector (Pk/QP) Polarity (V/H) Azimuth (Degrees) Antenna Height (m) Cable Loss Factor (db) Antenna Factor (db/m) Level dbuv/m Limit dbuv/m Margin (db) QP V QP V QP V QP V QP V QP V QP H QP V QP H Note: 1. Margin (db)= Limit (dbuv) - Level (dbuv) 2. If no frequencies are specified in the tables, no measurement for quasi-peak or average was necessary.

21 Project Number: 10CA46552 File Number TC8352 Page 21 of 28 Figure 7. Photo of Radiated emission test setup, 1.0 GHz to 2.0 GHz VGA Mode

22 Project Number: 10CA46552 File Number TC8352 Page 22 of 28 Figure 8. Graphical representation, 1.0 GHz to 2.0 GHz VGA Mode Electric Field Strength with Sweeps_Prescan(VH)FCC 1G-2G FCC Part 15 3m Class B PK FCC Part 15 3m Class B AV Level in dbuv/m Frequency in MHz Note: Blue: Vertical, Green: Horizontal Table 4-1. Radiated emission Test data, VGA Mode, 1.0 GHz to 2.0 GHz Frequency (MHz) Antenna (db/m) Correction Factor Amp (db) Cable (db) Antenna Height (m) Polarity Limit (dbuv/m) Peak Reading (dbuv) Result (dbuv) Margin (db) H V H V H H

23 Project Number: 10CA46552 File Number TC8352 Page 23 of 28 Table 4-2. Radiated emission Test data, VGA Mode, 1.0 GHz to 2.0 GHz Frequency (MHz) Antenna (db/m) Correction Factor Amp (db) Cable (db) Antenna Height (m) Polarity Limit (dbuv/m) Average Reading (dbuv) Result (dbuv) Margin (db) H V H V H H

24 Project Number: 10CA46552 File Number TC8352 Page 24 of 28 Figure 9. Photo of Radiated emission test setup for 30 MHz to 1000 MHz Component In, Out Mode

25 Project Number: 10CA46552 File Number TC8352 Page 25 of 28 Figure 10. Graphical representation_ 30 MHz to 1000 MHz Component In, Out Mode Electric Field Strength with Sweeps_Prescan(VH)-1 data reduction Class B Level in dbuv/m Electric Field Strength 10 m QP Class B M M G Frequency in Hz Table 5. Radiated emission Test data, Component In, Out Mode, 30 MHz to 1000 MHz Test Frequency (MHz) Meter Reading (dbuv) Detector (Pk/QP) Polarity (V/H) Azimuth (Degrees) Antenna Height (m) Cable Loss Factor (db) Antenna Factor (db/m) Level dbuv/m Limit dbuv/m QP V Margin (db) QP V QP V QP V QP V QP H QP V QP V Note: 1. Margin (db)= Limit (dbuv) - Level (dbuv) 2. If no frequencies are specified in the tables, no measurement for quasi-peak or average was necessary.

26 Project Number: 10CA46552 File Number TC8352 Page 26 of 28 Figure 11. Photo of Radiated emission test setup, COMPONENT in, out Mode, 1.0 GHz to 2.0 GHz Component In, Out Mode

27 Project Number: 10CA46552 File Number TC8352 Page 27 of 28 Figure 12. Graphical representation, 1.0 GHz to 2.0 GHz Component In, Out Mode Electric Field Strength with Sweeps_Prescan(VH)FCC 1G-2G FCC Part 15 3m Class B PK FCC Part 15 3m Class B AV Level in dbuv/m Frequency in MHz Note: Blue: Vertical, Green: Horizontal Table 6-1. Radiated emission Test data, Component in, out Mode, 1.0 GHz to 2.0 GHz Correction Factor Antenna Peak Frequency Height (MHz) Antenna Amp Cable Limit Reading Result Margin (db/m) (db) (db) (m) Polarity (dbuv/m) (dbuv) (dbuv) (db) V V V V H H

28 Project Number: 10CA46552 File Number TC8352 Page 28 of 28 Table 6-2. Radiated emission Test data, Component in, out Mode, 1.0 GHz to 2.0 GHz Frequency (MHz) Antenna (db/m) Correction Factor Amp (db) Cable (db) Antenna Height (m) Polarity Limit (dbuv/m) Average Reading (dbuv) Result (dbuv) Margin (db) V V V V H H

CONTENTS 6.2 TEST SET-UP...16

CONTENTS 6.2 TEST SET-UP...16 CONTENTS 1. GENERAL INFORMATION...3 2. INTRODUCTION...4 3. PRODUCT INFORMATION...5 3.1 DESCRIPTION OF EUT...5 3.2 SUPPORT EQUIPMENT / CABLES USED...6 3.3 MODIFICATION ITEM(S)...6 4. DESCRIPTION OF TESTS...7