DVS-2000C. Product Guide

Transcription

1 DVS-2000C Product Guide

2 DVS-2000C Product Guide Part Number BC Revision A, October 1996 Printed in U.S.A. Copyright Notice to Users 1996 Sony Corporation. All rights reserved. Neither this guide nor the software described herein, in whole or in part, may be reproduced, translated or reduced to any machine readable form without prior written approval from Sony Corporation. Sony is a registered trademark of Sony Corporation. Betacam, Betacart, Jumbotron, and Umatic are registered trademarks of Sony Corporation. FineKey, FineChroma, FlexiPad, Digital BETACAM, and Library Management System are trademarks of Sony Corporation. ISR (Interactive Status Reporting) is an equipment management system developed by Sony Corporation. SONY CORPORATION PROVIDES NO WARRANTY WITH REGARD TO THIS GUIDE, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN, AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS GUIDE, THE SOFTWARE OR SUCH OTHER INFORMATION. IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS GUIDE, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. Sony Corporation reserves the right to make any modification to this guide or the information contained herein at any time without notice. The software described herein may also be governed by the terms of a separate end use license agreement. All features, functions, and specifications are subject to change without notice.

3 Contents Introduction 1 About This Guide... 1 Features and Benefits 3 DVS-2000C Feature Overview... 3 Making Complex Tasks Simple... 4 Basic Tools... 4 Control Panel, Screen, and FlexiPad... 4 Primary Inputs and V-Proc... 5 Effect Keyers and DSK... 5 FineKey Processing... 6 Enhanced Wipe Generator... 6 Assignable Outputs... 6 Snapshot and Memory Pack... 6 Superior Editor Interface... 7 Switchable System Standard... 7 Power Tools... 7 Depth Key Processing... 7 Key Modifiers... 8 Advanced Chroma Keyer - FineChroma... 8 Dual Matte Generators with Color Mix Capability... 8 Frame Memories... 9 Auxiliary Buses... 9 Processed Key... 9 DME-LINK Configuration Guide 11 DVS-2000C Configuration Basics Processor Control Panel Operation Software with Manual Input Configuration Channel Serial Digital Input Board Analog Component Input Board Channel Serial Digital Input Board DVS-2000C Product Guide Contents i

4 Options and Upgrades Basic Chroma Key Board Chroma Key Upgrade Board Basic Frame Memory Board Down Stream Keyer Board Assignable Output Board Aux Bus/Depth Key Output Board NTSC Black Burst Generator Board Enhanced Wipe Option Key Border Generator CPU Upgrade and Memory Enhancement Memory Pack Serial Tally Decoder System Cables Rack Mount Kit Order Guide DVS-2000C Instructions Request Forms DVS-2000C Input Configuration Chart DVS-2000C System Components Chart Installation Guide 19 DVS-2000C Installation DVS-2000C Control Panel Control Panel Top View Control Panel Rear View Control Panel External Dimensions Control Panel Specifications DVS-2000C Chassis Chassis Front View Chassis Rear View Chassis External Dimensions Chassis Specifications DVS-2000C Connectors RS-422A Control Connector Specifications RS-422A Editor A Connector Specifications RS-422A DME Connector Specifications RS-422A Serial Tally Connector Specifications RS-232C Terminal Connector Specifications GPI Connector Specifications DVS-2000C System Interconnection Chart Video DVS-2000C System Interconnection Chart Control Appendix A. Feature List 33 DVS-2000C Feature Review DVS-2000C Features ii Contents DVS-2000C Product Guide

5 Appendix B. Related Resources 35 Related Resources Printed Media Audio/Video Media Appendix C. Sales and Service 37 General Information and Reference Regional Sales Offices Regional Service Centers National Parts Centers Emergency Response System SUPPORTNET SM SOFTWAREPLUS SM Glossary 43 Index 47 DVS-2000C Product Guide Contents iii

6 iv Contents DVS-2000C Product Guide

7 Introduction About This Guide Full digital! In both production and post, it s no longer a trend it s becoming a requirement. Towards that goal, the demand for both large and small-scale digital systems is increasing, particularly in the area of switchers. Where compact switchers are concerned, image quality, superb keying, and versatility head the list of customer requirements. To meet this demand, Sony offers the DVS- 2000C, a compact digital component switcher that excels in numerous performance categories and is designed to provide customer satisfaction for ease of use. To assist you with configuring the optimum digital component switcher for your customer s needs, this guide is divided into the following chapters: Chapter 1 Features and Benefits This chapter provides a detailed description of the DVS-2000C s basic and power features with concise explanations of why certain features are so valued. Chapter 2 Configuration Guide This chapter describes the DVS-2000C s system components to assist with configuration planning. To simplify the ordering process, a convenient quotation request form is included. DVS-2000C Product Guide Introduction 1

8 Chapter 3 Installation Guide This chapter offers information and diagrams to assist with facility engineering and equipment integration requirements. Appendix A Feature List This appendix provides a category-based description of DVS-2000C features and modes. Appendix B Related Resources This appendix lists additional written and visual reference material available for further reading and research on the DVS-2000C. Appendix C Sales and Service This appendix provides basic information about Sony sales, service, emergency response, and software support. Glossary The glossary provides a reference list of important switching and video terms used throughout this guide. A comprehensive Index is also provided for your reference. 2 Introduction DVS-2000C Product Guide

9 Features and Benefits DVS-2000C Feature Overview MIX WIPE DME This chapter outlines the DVS-2000C s features with discussions of both the functionality and benefits of the switcher s basic and power tools. Concise explanations relating to the importance of each feature are provided. The following sections are included: The Making Complex Tasks Simple section discusses the overall theme under which the DVS-2000C is designed. The Basic Tools section discusses important large categories of DVS-2000C features. The Power Tools section outlines the large feature categories that technical directors value the most on the DVS-2000C. For a finely focused approach to each feature, refer to Appendix A, Feature List. This appendix provides tables and descriptions of DVS-2000C features. Note that some features described in the following sections may apply only when Sony peripheral equipment is used. DVS-2000C Product Guide Features and Benefits 3

10 Making Complex Tasks Simple If an editing system is considered the brain of a post-production system, then the switcher is the heart. All signals flow through it. It needs to be compact yet powerful. And if creativity is a factor, what better place to reside than at the heart of a system an entire video system. Sony s DVS-2000C Digital Video Switcher is just such a device, and many factors account for its power. Above all, it s the switcher s ability to make complex tasks simple. Here are just a few examples: DME-LINK the ability to run the DME-3000 or DME-7000 effects timeline from the switcher s control panel. This function simplifies complex triggering with a simple push of the fader or the triggering of an E-file. Processed Key the ability to compose a key within the DVS-2000C, route it to an external device (such as the DME) for processing, and reenter it in the same DVS-2000C keyer. This feature reduces complex patching to a simple button press. System Integration provides a powerful production and postproduction toolbox in conjunction with the BVE-9100, BVE-2000, and DME-series effects devices. Through status reporting and the editing system s ability to learn switcher functions, this high level system function simplifies and enhances the editor s day-to-day job requirements. Familiarity the DVS-2000C s operating style simplifies the learning curve and enhances creativity at every turn. Throughout this guide, the DVS-2000C s benchmark principle rings true making complex tasks simple. Basic Tools This section describes basic DVS-2000C features used in day-to-day production and post-production. Control Panel, Screen, and FlexiPad The DVS-2000C s dedicated control panel is engineered for simplicity and clarity of operations. The architecture is the familiar single-m/e style that s been a fundamental part of edit suites, remote vans, and production studios for over a decade. The panel includes a bright LCD screen that offers easy access to operational parameters, adjustments, and setup functions. The control panel also includes the DVS-2000C s unique FlexiPad. From one centralized location the user can enter wipe patterns, store and recall complete panel snapshots, and enter transition rates. The benefit is as clear as the design operational comfort. 4 Features and Benefits DVS-2000C Product Guide

11 Primary Inputs and V-Proc The DVS-2000C provides four standard serial digital inputs, with expansion capability up to sixteen inputs. Both serial digital (SDI) and component analog inputs can be added. Video and Key sources are assigned to the bus-rows through the switcher control panel s convenient and clear LCD screen. When optional analog input boards are installed, the DVS-2000C allows mixed operation of serial digital and analog component video (and monochrome key) signals simultaneously. Because input configurations change from day-to-day with a compact switcher, all inputs have an auto-timing window with an adjustment range of +/-.4H. For simplicity and convenience, the V-Proc (Video Processing) feature allows adjustment of each input to compensate for common errors in image acquisition. With a range of +/- 200% for video, luminance, and chrominance, V-Proc actually provides a greater control range than a TBC. Additional adjustments are provided for black level and hue. The bottom line is that the DVS-2000C does not restrict you to one or two input configurations. You have the flexibility to configure the precise system to suit the customer s production and post-production requirements and expand that system when the need arises. Effect Keyers and DSK In the DVS-2000C s single-m/e architecture, two powerful effect keyers are provided as standard. An optional DSK (Down Stream Key) is also available, allowing three simultaneous layers and the ability to change priorities dynamically. A variety of creative key types can be selected, as follows: Luminance a high-gain key that derives the hole-cutting information from the full range of source luminance values. Chroma a key in which the hole-cutting information is derived from a color rather than from a video level. Linear a key that takes advantage of independent key signals provided by external devices such as character generators. Linear keys have reduced variability in the key signal s gain. Clean a key that takes advantage of shaped video provided by devices such as digital video effects. Whereas a linear key is multiplicative in its ability to cut a hole, a clean key is additive. Depth a key that utilizes the third dimension on the video screen. Refer to the Depth Key Processing section for additional details. Pattern a key that uses a wipe pattern (and all active pattern modifiers) to generate a key signal. Keyers truly make the difference in switchers. There s rarely a commercial or production today that doesn t involve multi-layering or some form of creative keying it s a requirement that can t be overlooked in switcher design. The DVS-2000C s keying and key processing capability is powerful, yet it s also simple to understand and operate. It allows you to express your creativity to make a storyboard come true without getting lost in menus and keypads. DVS-2000C Product Guide Features and Benefits 5

12 FineKey Processing One superb aspect of the DVS-2000C s high quality key processing is the ability to fine tune and optimize the key signal itself independent of the fill. Through the use of over-sampling, the width, softness, and key edge can be modified in sub-pixel units. Edges can be softened and smoothed to add dimension and overall realism, and adjustments can be performed independently to the top, bottom, left and right edges of the key. Furthermore, because the process follows the edge of the key itself, even irregularly shaped key signals benefit from FineKey processing. From simple mattes to complex chroma keys situations, the DVS-2000C s FineKey processing is another simple tool that yields visually powerful results. Enhanced Wipe Generator With the BKDS-2070 option, additional patterns (including matrix wipes) are added. These include Star, Heart, and the popular Diamond Dust wipe. The enhanced patterns can also be combined with the primary patterns enabling you to create new custom wipes from the DVS-2000C s creative toolbox. Assignable Outputs In addition to the three standard program outputs, the DVS-2000C offers an assignable output option that provides both serial digital and analog component outputs. Any of the Program, Program Key, Preview, Clean or Processed Key signals can be independently assigned to these outputs as required. Compared to compact switchers with fixed output configurations, the DVS-2000C can literally adapt to the production or post production situation at hand, with the ability to assign (and re-assign) outputs from the control panel itself. Snapshot and Memory Pack As the natural by-product of computer controlled switchers, the ability to store and recall control panel snapshots has become a fundamental requirement in production and post. Clients come back to change things. Producers like their keys set up just one way and always that way. And technical directors like to work with special setups even if the previous TD had a completely different setup. The DVS-2000C allows all these situations and more, with the ability to store and recall up to 99 snapshot memories, and transition between snapshots. The snapshot data, as well as setup data, can be archived on an optional Memory Pack for long term storage. For live use or post, snapshots are directly accessible through the FlexiPad for instantaneous recall and the appearance (on screen) of a switcher many times as large! 6 Features and Benefits DVS-2000C Product Guide

13 Superior Editor Interface The DVS-2000C communicates with editing systems from most major manufacturers via serial interface, including Sony s BVE With the Sony BVE-9100, Sony s superb status reporting feature adds many advanced operational modes: At the basic level (as with most editors), crosspoints can be assigned, patterns can be selected, transitions and durations can be controlled, and many switcher functions can be learned and stored in the editor s EDL. GPI control also provides auto-transition and memory recall functions. At the advanced operational level with the BVE-9100, virtually everything that can be controlled or adjusted in the switcher itself can be adjusted from the BKE-9402 Programmable Control Panel the editing system s versatile companion product. It s another aspect of Sony s system integration that contributes to the simplicity of working with a Sony system making complex tasks simple. Switchable System Standard The DVS-2000C provides standard and format flexibility. You can operate on either the 525 or 625 line systems, and switch between the 4:3 or 16:9 aspect ratio with all switching performed on the integral LCD screen. Power Tools This section outlines the features that technical directors and producers value the most on the DVS-2000C. Power tools not only simplify the user s job, but they add to that all-important category of creativity the area in which a switcher s artistic and aesthetic capability is in effect greater than the sum of its parts. Depth Key Processing The DVS-2000C s versatile and unique Depth Key option permits keys in the third dimension the Z axis or depth axis in XYZ coordinate space. The depth information can be derived from a full-screen video source, a key source, the main mask, a subsidiary mask, or by using Z-data from the DME-3000 or DME For example, when a video signal is processed by the DME and routed back to Keyer- 1, the Z-data controls the intersection between switcher layers. The function is so advanced that Z-data can be transferred to (and from) a digital component tape recorder, with retention of Z-depth parameters. In practice, you can fly an airplane around a globe or weave an object in and out of a picket fence without complex masks, timelines, and repeated priority switching. Once again, the benefits are clear what was once accomplished with undue effort, is made easy through Depth Key Processing. DVS-2000C Product Guide Features and Benefits 7

14 Key Modifiers In the early days of switchers the ability to add borders and shadows was quite an achievement. Today, if a keyer isn t absolutely loaded with features (far beyond borders and shadow capability), the fundamental creativity of the switcher is limited. To address this requirement, the DVS-2000C provides extensive key modifiers: Each keyer has an independent pattern generator, and a separate pattern generator for mask. Each keyer has two dual matte generators: one for border fill and one for key fill. Each matte generator in turn has its own pattern generator. With the optional Key Border Generator installed, Border, Drop Border, Soft Edge, Shadow and Drop Shadow capabilities are added to the effect keyer. The option also provides continuous color, position, width, density and softness adjustments. Powerful copy functions allow you to transfer settings between keyers and matte generators with ease. When the client says show me what you can do with this key, the technical director will never run out of creative ideas with the DVS-2000C. Advanced Chroma Keyer - FineChroma All Chroma Keyers are not created equal. It s a common belief that those built in to switchers are average in quality, and it really takes an external single-purpose box to make a chroma key shine. Not true with the DVS-2000C! Sony s new FineChroma technology, available with the optional BKDS-2031 and BKDS-2032 boards together, provides an advanced level of chroma key processing typically found in external chroma key devices only. You get full 4:4:4:4 video and key processing, auto and manual modes, color cancellation functions, spot color correction, shadow and density control, plus a dual clip and gain feature that allows two separate clips in a single picture. Although the feature list is impressive, it s the visual results that make the difference with Chroma Keys. Whether you re keying transparent glass, wispy hair, or working with an uneven background composed of varying luminance levels, the DVS-2000C s FineChroma technology handles each situation with ease delivering clear keyed edges and a remarkable degree of visual realism on screen. Dual Matte Generators with Color Mix Capability Switchers stopped being just switchers (in the precise definition of the word) many years ago. They ve evolved into a combination switching device and artist s palette, with the ability to mix sources, colors, and patterns as required to bring a storyboard or a production to life. To this creative end, the DVS-2000C provides eight (!) internal dual color matte generators for Key-1 fill, Key-1 edge, Key-2 fill, Key-2 edge, DSK fill, DSK edge, Wipe border, and Color background. Each matte generator has color mix and wash capability, its own dedicated pattern generator, and extensive pattern modifiers. Rembrandt would be jealous. 8 Features and Benefits DVS-2000C Product Guide

15 Frame Memories One of the features that users like best on the DVS-2000C is the Frame Memory function, available with the optional BKDS-2041 memory board. The option provides storage for two individual frames, divided as needed between video only, or video and key signals. Frame memories can be used for the following creative applications: Grabbing fields or frames. Layering. Creating custom masks. Storing matte and fill signals. Painting from a user-supplied graphics tablet. Re-positioning live or frozen images. Storing and manipulating frozen z-axis images (in conjunction with Depth Key processing). Keying and mixing between frames, filling with video from an internal auxiliary bus or matte generator, then routing the results to any desired internal or external switcher destination. In much the same way that an audio sub-mixer allows you to get creative upstream of the main mix, Frame Memories provide video sub-mix functions upstream of the buses, with the resulting capability and creativity. Auxiliary Buses Aux buses are Aux buses. You pick up a fixed set of signals off the bus rows and ship them out, right? Not so with the DVS-2000C! Four auxiliary buses are available as a single optional board, with the standard set of crosspoints available as you might expect. However, the similarities end there. Using an assignment menu, you can place the Frame Memories, Key mattes and fills, and even the Z-data for depth keys on the Aux buses. In fact (here s the kicker), every signal that enters the switcher or is internally generated can be placed on an Aux bus. The feature is simple and logical. You can sometimes predict the signals you ll need before an edit session, but once you re in it, there s a confidence in knowing that everything is accessible via the Aux buses on demand. Processed Key The DVS-2000C s Processed Key function is an effects pathway that solves the problem of routing signals to and from a DME digital effects system or color corrector, without complex patching. You can compose a key, clip and adjust it as desired, route it to an external device and re-enter it in the same DVS-2000C keyer simply by pressing the Proc Key button. Whether you re flying logos or simply re-sizing a graphic, the Processed Key approach clearly illustrates the benefits of Sony s system integration concept. Best of all, the feature works with most other major manufacturer s DVEs that are equipped with a key channel. DVS-2000C Product Guide Features and Benefits 9

16 DME-LINK For live field production and studio production, the DVS-2000C s DME-LINK enables specified DME-3000 and DME-7000 effects to be run by the switcher s fader just like wipes and dissolves. In post, it s easy the BVE-9100 editing system sends out RS-422 commands and the effect is initiated. But in live production, you simply don t have enough hands to trigger all the necessary devices. Sony s DME-LINK function runs the DME timeline, and the switcher s internal transition rate overrides the rate programmed locally on the DME. Over 30 basic effects are available for both single and dual-channel DME systems, and on the DME- 7000, up to 12 user-defined digital effects can be used. DME-LINK once again underscores the DVS-2000C s benchmark principle making complex tasks simple. 10 Features and Benefits DVS-2000C Product Guide

17 Configuration Guide DVS-2000C Configuration To assist with configuration planning, this chapter describes the DVS-2000C s system components. In addition, a convenient quotation request form is included to assist with pre-sales planning and to simplify the DVS-2000C ordering process. The following sections are included: Basics Input Configuration Options and Upgrades Order Guide Request Form DVS-2000C Product Guide Configuration Guide 11

18 Basics This section describes the basic components that comprise a DVS-2000C system. DVS-2000C Video Effects Processor The DVS-2000C chassis houses the main electronics, communication ports, and all input/output connectors. Four serial digital inputs (SDI) and three program outputs are standard. A variety of component analog and SDI input configurations are possible, up to the maximum 16 inputs. Multiple slots are provided for options and upgrades. Two slots are provided for additional input boards. In the Installation Guide chapter, refer to the DVS-2000C Chassis section for a chassis diagram and list of chassis specifications. BKDS-2010 Control Panel The Control Panel presents all functions, crosspoints, and adjustments in a compact and widely-accepted panel layout easy to use and easy to master. The integral LCD screen and FlexiPad are standard. In the Installation Guide chapter, refer to the DVS-2000C Control Panel section for a control panel diagram and list of specifications. BZS-2020 Operation Software with Manual The operation software is required to initiate the DVS-2000C. The software also drives the switcher s logical array of system and setup menus. Input Configuration This section describes the input boards that can be added to a DVS-2000C system. The DVS-2000C has 2 slots for additional input boards. In the Request Forms section, use the DVS-2000C Input Configuration chart to determine the correct input configuration required. BKDS-2020A 6-Channel Serial Digital Input Board The BKDS-2020A 6-Channel Serial Digital Input Board provides six serial digital inputs. The system accepts two BKDS-2020A boards, maximum. 12 Configuration Guide DVS-2000C Product Guide

19 BKDS-2022 Analog Component Input Board The BKDS-2022 Analog Component Input Board provides two analog component video inputs (R-Y, B-Y, Y), and two analog key inputs (Y). The board also functions as the motherboard that accepts two BKDS-2022 piggyback boards, maximum. BKDS-2021A 2-Channel Serial Digital Input Board The BKDS-2021A 2-Channel Serial Digital Input Board provides two serial digital inputs. The board is a piggyback that mounts on the BKDS The system accepts two BKDS-2021A boards, maximum one on each installed BKDS Options and Upgrades This section describes the optional boards and system upgrades that can be added to a DVS-2000C switcher. BKDS-2031 Basic Chroma Key Board The BKDS-2031 Basic Chroma Key Board offers 4:4:4 over-sampling of Chroma and Key signals for high quality FineChroma effects, including auto-adjust, color window, color cancellation, and foreground video adjustment. The system accepts one board. BKDS-2032 Chroma Key Upgrade Board The BKDS-2032 Chroma Key Upgrade Board adds a second sample that handles uneven backgrounds with varying luminance levels. Enhancements for shadows and spot color correction are also provided. The system accepts one board. Note that the BKDS-2031 Basic Chroma Key Board is required. BKDS-2041 Basic Frame Memory Board The BKDS-2041 Basic Frame Memory Board provides two full color frame memories. The option includes Frame/Field freeze capability (GPI controllable), live picture placement, key mode for layering, last freeze recall, paint mode, and dedicated routing for each frame memory. DVS-2000C Product Guide Configuration Guide 13

20 BKDS-2050 Down Stream Keyer Board The BKDS-2050 Down Stream Keyer Board adds the system s third keyer (in addition to the two effects keyers). This option includes a key border generator, mask processing, pattern key, and multiple key types including luminance, linear, and clean. With the Chroma Key Upgrade Board (BKDS-2032) installed, chroma keys can be performed in the Down Stream Keyer. BKDS-2060 Assignable Output Board The BKDS-2060 Assignable Output Board offers additional analog and digital system outputs. Outputs can be independently assigned as required to Program, Preview, Edit Preview, Clean Out, and Proc Key. BKDS-2061 Aux Bus/Depth Key Output Board The BKDS-2061 Aux Bus/Depth Key Output Board provides four auxiliary buses, used primarily for routing signals to the DME and Edit Preview. The board also includes the electronics for the superb Depth Key processing feature. BKDS-2062 NTSC Black Burst Generator Board The BKDS-2062 NTSC Black Burst Generator Board provides a single color black output, regenerated from the reference video input. BKDS-2070 Enhanced Wipe Option The BKDS-2070 Enhanced Wipe Option provides the same wipe set found in the DVS-7000 family of switchers. The option includes both Matrix and Diamond Dust wipes. BKDS-2071 Key Border Generator The BKDS-2071 Key Border Generator provides a border line option for the system s two effects keyers. 14 Configuration Guide DVS-2000C Product Guide

21 BKDS-2072 CPU Upgrade and Memory Enhancement The BKDS-2072 CPU Upgrade and Memory Enhancement increases the amount of switcher panel snapshot registers to 99. The enhancement is also required for 2- Channel DME wipe control. BZS-2090A Memory Pack The BZS-2090A Memory Pack provides removable storage for 99 switcher panel snapshot registers. BKDS-6080 Serial Tally Decoder The BKDS-6080 Serial Tally Decoder provides the necessary electronics for a functional on-air camera tally system. RCC- 5G, 10G, 30G System Cables The RCC-series cables provide RS-422 interconnects for serial controlled devices. Three lengths are available: RCC-5G, 5 meters RCC-10G, 10 meters RCC-30G, 30 meters RCC cables are required to connect the switcher chassis to RS-422 devices. Note that some devices include RS-422 cables as standard. RMM-30 Rack Mount Kit The RMM-30 Rack Mount Kit allows the DVS-2000C to be rack-mounted in a standard 19" rack. DVS-2000C Product Guide Configuration Guide 15

22 Order Guide DVS-2000C To: Fax #: From: Date: Pages: Message: Fax Cover Company Name: Address: Customer Information Phone: Fax: Contact: Title: Instructions The Request Form on the following page includes a table of all DVS-2000C system components. Use the table to configure the customer s optimum DVS-2000C switcher system. Please perform the following steps: As a prerequisite, review the information in the Installation Guide chapter: Complete the customer information section above. In the Request Forms section, use the two charts as follows: In the DVS-2000C Input Configuration chart, check off the one input configuration required (both quantity and format), then transfer the information and quantities to the DVS-2000C System Components chart. In the DVS-2000C System Components chart, check off the basic and optional items required. Recommended items for a basic DVS-2000C system are marked with an X in the Rec column. Mark quantities (where appropriate), exceptions, and comments in the Notes column. Send the completed forms to your local Sony Sales Representative to receive a detailed DVS-2000C proposal. Refer to Appendix C. Sales and Service for a list of Sony Regional Sales Offices. 16 Configuration Guide DVS-2000C Product Guide

23 For submitting the completed proposal, the area at the top of this page can be used as a convenient fax cover sheet. DVS-2000C Product Guide Configuration Guide 17

24 Request Forms This section includes two charts: DVS-2000C Input Configuration chart DVS-2000C System Components chart DVS-2000C Input Configuration Chart Check off the one input configuration required, note the quantity and format of input boards that support the desired configuration, then transfer the information and quantities to the DVS-2000C System Components chart. DVS-2000C Input Configuration Input BKDS-2020A BKDS-2022 BKDS-2021A Configuration Required 6 SDI Inputs 2 Analog Component + 2 SDI Inputs 2 Analog Key (Piggyback) 4 SDI (standard) 10 SDI 1 16 SDI 2 4 SDI + 2 Analog Component + 2 Key 1 4 SDI + 4 Analog Component + 4 Key 2 10 SDI + 2 Analog Component + 2 Key SDI + 2 Analog Component + 2 Key SDI + 2 Analog Component + 2 Key SDI + 4 Analog Component + 4 Key Configuration Guide DVS-2000C Product Guide

25 DVS-2000C System Components Chart Check off the basic and optional items required. Recommended items for a basic DVS-2000C system are marked with an X in the Rec column. Mark quantities (where appropriate), exceptions, and comments in the Notes column. DVS-2000C System Components Part # Description Rec Notes Basics DVS-2000C Processor X Includes 4 serial digital inputs BKDS-2010 Control Panel X BZS-2020 Operation Software with Manual X Required to initiate the DVS-2000C Input Configuration BKDS-2020A 6-Channel Serial Digital Input Board X BKDS-2021A 2-Channel Serial Digital Input Board 1 BKDS-2022 is required for each BKDS- 2021A BKDS-2022 Analog Component Input Board Options and Upgrades BKDS-2031 Basic Chroma Key Board X System accepts 1 BKDS-2032 Chroma Key Upgrade Board System accepts 1. BKDS-2031 is required BKDS-2041 Basic Frame Memory Board X BKDS-2050 Down Stream Keyer Board X BKDS-2060 Assignable Output Board X BKDS-2061 Aux Bus/Depth Key Output Board X Provides 4 Aux buses BKDS-2062 NTSC Black Burst Generator Board BKDS-2070 Enhanced Wipe Option X BKDS-2071 Key Border Generator X BKDS-2072 CPU Upgrade and memory enhancement X BZS-2090A Memory Pack X Used for off-line effects storage BKDS-6080 RCC-5G RCC-10G RCC-30G RMM-30 Serial Tally Decoder 5 meter RS-422 cable 10 meters RS-422 cable 30 meters RS-422 cable Rack Mount Kit User select Select one per RS-422 control device interface DVS-2000C Product Guide Configuration Guide 19

26 Installation Guide DVS-2000C Installation This chapter provides information and diagrams to assist with facility engineering and equipment integration requirements. The following sections are included: The DVS-2000C Control Panel section provides detailed control panel diagrams and a table of specifications (dimensions, power, environmental and connectors). The DVS-2000C Chassis section provides detailed chassis diagrams and a table of chassis specifications (dimensions, power, environmental and connectors). The DVS-2000C Connectors section provides comprehensive connector pinout tables. Two detailed diagrams are also provided at the end of the chapter: DVS-2000C System Interconnection Chart Video DVS-2000C System Interconnection Chart Control DVS-2000C Product Guide Installation Guide 21

27 DVS-2000C Control Panel This section includes four areas: Control Panel Top View Control Panel Rear View Control Panel External Dimensions Control Panel Specifications Control Panel Top View The figure below illustrates a top view of the DVS-2000C Control Panel. WIPE DIRECTION ENABLE NORM NORM REV REV EDITOR DME GPI MULTI ROTA- TION MOD SYSTEM BORD SOFT ASPCT POS ON SETUP MEM MISC USER MENU F1 F2 F3 F4 F5 F6 EXIT AUTO DSK FTB COLOR MIX MATTE 2ND MATTE MATTE KEY BUS SELF AUTO SPLIT KEY CONTROL FINE KEY BORD DROP BORD SHDW OUT LINE TRANS RATE /- EFF DISS KEY KEY 1 2 DSK EDGE WIPE BORD FILL SOURCE LIN CHR LUM CLEAN PTN TYPE DEPTH KEY MAIN MASK SUB MASK EDGE KEY INV MODIFY WIPE LEARN CLEAR AUTO TRANS TRIM XPT DSBL KEY KEY 1 2 DSK COLOR BKGD FILL KEY KEY 1 2 DSK DELEGATION PROC KEY UTILITY USER RECALL DIRECT ENTER 0. SHIFT KEY SRCE FRAME MEM 1 FRAME MEM 2 AUX AUX AUX EDIT PVW BLACK COLOR BKGD OVER OVER AUX BUSES KEY PRIOR KEY1 ON KEY2 ON FADE TO BLACK BLACK KEY BUSES COLOR BKGD BKGD KEY KEY 1 2 NEXT TRANSITION DSK PVW BLACK PGM BUS COLOR BKGD MIX WIPE DME TRANSITION TYPE DSK MIX DSK CUT BLACK COLOR BKGD AUTO TRANS CUT PST BUS DVS-2000C Control Panel Top View 22 Installation Guide DVS-2000C Product Guide

28 Control Panel Rear View The figure below illustrates a rear view of the DVS-2000C Control Panel. SWITCHER SPARE TERMINAL AC IN DVS-2000C Control Panel Rear View Rear Control Panel components are listed below: 1. Switcher (D-sub 9-pin) RS-422A 2. Spare (D-sub 9-pin) RS-422A. Not active. 3. Terminal (D-sub 9-pin) Wacom IV tablet or RS-232C 4. AC In, 3-pin AC connector 5. Ground terminal 6. Slot for optional Memory Pack Control Panel External Dimensions The figure below illustrates external Control Panel dimensions (in millimeters): 400 Top View Side View 120 Rear View DVS-2000C External Control Panel Dimensions DVS-2000C Product Guide Installation Guide 23

29 Control Panel Specifications The following table lists Control Panel specifications: DVS-2000C Control Panel Specifications Dimensions Parameter Weight (approximate.) Processor connector Terminal connector AC In Operating temperature For operation within specifications Power consumption Specification mm: 424 (w) x 120 (h) x 400 (d) inches: (w) x 4.75 (h) x (d) 10.0 kg 22 lb. 1 oz. 9-pin D-sub connector (RS-422A) 9-pin D-sub connector (RS-422A or RS-232C) 3-pin AC connector +5 to +40 C +41 to +104 F +10 to +35 C 50 to +95 F Max. 0.5A/0.3A ( V/ V) 24 Installation Guide DVS-2000C Product Guide

30 DVS-2000C Chassis This section includes four areas: Chassis Front View Chassis Rear View Chassis External Dimensions Chassis Specifications Chassis Front View The figure below illustrates a front view of the DVS-2000C chassis. 1 2 DIGITAL VIDEO SWITCHER DVS-2000C POWER ON OFF DVS-2000C Chassis Front View Front chassis components are listed below: 1. Power Indicator 2. Power Switch DVS-2000C Product Guide Installation Guide 25

31 Chassis Rear View The figure below illustrates a rear view of the DVS-2000C chassis KEY B-Y EXT CH4 13 R-Y Y KEY B-Y SERIAL TALLY TERMINAL 12 CH3 R-Y 11 Y 10 9 MATRIX DME PGM OUTPUTS KEY B-Y KEY B-Y ASSIGN OUTPUTS R-Y B-Y Y 8 CH2 R-Y 7 Y CH1 6 R-Y 5 Y REF INPUT GPI EDITOR B EDIT PVW ANALOG 2 1 EDITOR A REF OUTPUT PANEL AUX OUTPUTS PRIMARY INPUTS AC IN DVS-2000C Chassis Rear View Rear chassis components are listed below: 1. Matrix (D-sub 9-pin) RS-422A. Not active. 2. Serial Tally (D-sub 9-pin) RS-422A 3. EXT (D-sub 25-pin). Not active. 4. Terminal (D-sub 9-pin) RS-232C 5. DME (D-sub 9-pin) RS-422A 6. Chassis cooling fans 7. Program output group; serial digital video 8. Edit Preview output group; serial digital video 9. Assignable output group; serial digital video 10. Primary input group; serial digital video and analog component video 11. Reference output; analog sync signal 12. Reference input group; analog black or sync 13. GPI (D-sub 25-pin) 14. Panel (D-sub 9-pin) RS-422A 15. Editor A (D-sub 9-pin) RS-422A 16. Editor B (D-sub 9-pin) RS-422A. Not active. 17. Ground terminal 18. AC In receptacle 26 Installation Guide DVS-2000C Product Guide

32 Chassis External Dimensions The figure below illustrates external chassis dimensions (in millimeters): 450 Top View 424 Side View 221 Front View DVS-2000C External Chassis Dimensions Chassis Specifications The following table lists chassis specifications: DVS-2000C Chassis Specifications Parameter Specification Dimensions Weight mm: 424 (w) x 221 (h) x 450 (d) inches: (w) x 8.75 (h) x (d) 30 kg 66 lb. 2 oz. Reference video in Analog black burst or analog sync signal input, BNC type (x1), 75 ohms, passive loop-through Reference video out Primary Inputs Level: (Provided with BKDS-2062 board.) Analog sync signal output, BNC type (x1), 75 ohms. The delay range is -30 to +90 µs. +/- 3dB Standard inputs BKDS-2020A (option) BKDS-2021A (option) Level: Return Loss: Level: Return Loss: Level: Return Loss: Serial digital video, BNC (x4), 75 ohms with active loop through. Conforms to the SMPTE specification PN-259M. 800mV +/-10% 15dB (5-270 MHz) Serial digital video, BNC (x6), 75 ohms with active loop through. 800mV +/-10% 15dB (5-270 MHz) Serial digital video, BNC (x2), 75 ohms with active loop through. 800mV +/-10% 15dB (5-270 MHz) DVS-2000C Product Guide Installation Guide 27

33 DVS-2000C Chassis Specifications (continued) Parameter Specification Primary Inputs (continued) BKDS-2022 (option) Analog component video and key signal, BNC (x8), 75 ohms, Y/R-Y/B-Y (Betacam, SMPTE) and Y Video Outputs Program output Level: Transfer speed: Aux 1, 2, 3, and Edit Preview output Assignable output Level: Transfer speed: Level: Transfer speed: Serial digital video, BNC (x3), 75 ohms 800mV +/-10% 270 Mbps (Provided with BKDS-2061 board) Serial digital video, BNC (x1), 75 ohms 800mV +/-10% 270 Mbps (Provided with BKDS-2060) Serial digital video, BNC (x2), 75 ohms 800mV +/- 10% 270 Mbps Analog component video BNC (x2), 75 ohms, Y/R-Y/B-Y (Betacam, SMPTE) Adjustable Parameters FineKey V-Proc Left / Right Key Edges: Top / Bottom Key Edges: Softness Adjustment: Video Gain: Luminance Gain: Chrominance Gain: Black Level: Hue: +/- 2 clock pulses +/- 1H 0 to 100% for each edge -200 to +200 IRE -200 to +200 IRE -200 to +200 IRE to IRE -180 degrees to degrees Environmental Operating temperature For operation within specifications Power requirement Power consumption +5 to +40 C +41 to +104 F 0 to +35 C 50 to +95 F AC V, +/- 10%, 50/60 Hz Max. 3A/2A ( V/ V) 28 Installation Guide DVS-2000C Product Guide

34 DVS-2000C Connectors The following connectors are listed in this section: RS-422A Control Connector RS-422A Editor A Connector RS-422A DME Connector RS-422A Serial Tally Connector RS-232C Terminal Connector GPI Connector RS-422A Control Connector Specifications The following table lists RS-422A Control connector specifications: RS-422A Control Connector Specifications (Female) Pin # Signal Function 1 GND Frame Ground 2 Con TX-A Transmitted data ( ) to Panel (BKDS-2010) 3 Con RX-B Received data (+) from Control Panel 4 GND Common ground from Control Panel 5 VDB VD signal (+) transmitting to Control Panel 6 GND Common ground to Control Panel 7 Con TX-B Transmitted data (+) to Control Panel 8 Con RX-A Received data ( ) from Control Panel 9 VDA VD signal ( ) transmitting to Control Panel DVS-2000C Product Guide Installation Guide 29

35 RS-422A Editor A Connector Specifications The following table lists RS-422A Editor A connector specifications: RS-422A Editor A Connector Specifications (Female) Pin # Signal Function 1 GND Frame ground 2 EDT A TX-A Transmitted data ( ) to Editor (e.g., BVE-9100) 3 EDT A RX-B Received data (+) from Editor 4 GND Common ground from Editor 5 Spare 6 GND Common ground to Editor 7 EDT A TX-B Transmitted data (+) to Editor 8 EDT A RX-A Received data ( ) from Editor 9 GND Frame ground RS-422A DME Connector Specifications The following table lists RS-422A DME connector specifications: RS-422A DME Connector Specifications (Female) Pin # Signal Function 1 GND Frame ground 2 DME TX-A Transmitted data ( ) to DME 3000, DME RX-B Received data (+) from DME 4 GND Common ground from DME 5 Spare 6 GND Common ground to DME 7 DME TX-B Transmitted data (+) to DME 8 DME RX-A Received data ( ) from DME 9 GND Frame ground 30 Installation Guide DVS-2000C Product Guide

36 RS-422A Serial Tally Connector Specifications The following table lists RS-422A Serial Tally connector specifications: RS-422A Serial Tally Connector Specifications (Female) Pin # Signal Function 1 GND Frame ground 2 Serial Tally RX-A Received data ( ) 3 Serial Tally TX-B Transmitted data (+) 4 GND Common ground 5 Spare 6 GND Common ground 7 Serial Tally RX-B Received data (+) 8 Serial Tally TX-A Transmitted data ( ) 9 GND Frame ground RS-232C Terminal Connector Specifications The following table lists RS-232C Terminal connector specifications: RS-232C Terminal Connector Specifications (Female) Pin # Signal Function 1 DCD Data Carrier detect (Input) 2 RXD Received data (Input) 3 TXD Transmitted data (Output) 4 DTR Data terminal ready (Output) 5 SG Signal ground 6 DSR Data set ready (Output) 7 RTS Request to send (Output) 8 CTS Clear to send (Input) 9 NC DVS-2000C Product Guide Installation Guide 31

37 GPI Connector Specifications The following table lists GPI connector specifications GPI Connector Specifications (Female) Pin # Signal Function 1 GND Ground 2 GND Ground 3 GPI In 2 4 GPI In 4 General purpose input 5 GPI In 6 6 GPI In 8 7 GPI Out 1B 8 GPI Out 2B * General purpose relay output (B) 9 GPI Out 3B 10 GPI Out 4B 11 GPI Out 6 ** General purpose open collector output 12 GPI Out 8 13 GPI Out Com Ground for open collector output 14 GND Ground 15 GPI In 1 16 GPI In 3 General purpose input 17 GPI In 5 18 GPI In 6 19 GPI Out 1A 20 GPI Out 2A * General purpose relay output (A) 21 GPI Out 3A 22 GPI Out 4A 23 GPI Out 5 ** General purpose open collector output 24 GPI Out 7 25 GPI Out Com Ground for open collector output Note: A and B of the same number constitute a pair of relay contacts. * (Relay) GPI Out XB ** (Open collector output) +V GPI Out 5-8 GPI Out XA GPI Out Com X; Installation Guide DVS-2000C Product Guide

38 DVS-2000C System Interconnection Chart Video The simplified diagram below illustrates a typical DVS-2000C system. Video connections only are shown. SDI Sources Reference Distribution Pulse/Test Generator Video Status Ref. SDI In VTR DVR, DVW Series SDI Out Video Status Edit Preview Assign Preview Waveform Ref. SDI In Ref. VTR DVR, DVW Series SDI Out Video Status Ref. SDI Bars Edit Preview (Aux 4) SDI Test Assign Ref. VTR DVR, DVW Series SDI Out DDR Status VTR 1 VTR 2 VTR 3 DDR DME Video Assign Program 1 Program 2 Program 3 SDI In Digital Disk Recorder SDI Out DME Key Title Camera CG Video Aux 1 Aux 2 CG Key Aux 3 Ref. Video In VGA Out DME Status Video Switcher DVS-2000C Ref. Out Key In SDI Out EXT/C In SDI Key Out Digital Video Effects DME Series Component Analog Sources Ref. Video Out Title Camera CG Status Ref. Character Generator Video Out Key Out Note: In this diagram, some Sony models are shown. Other models of peripheral equipment are also supported. DVS-2000C Product Guide Installation Guide 33

39 DVS-2000C System Interconnection Chart Control The simplified diagram below illustrates a typical DVS-2000C system. Control connections only are shown. RS-422 Serial Control VTR DVR, DVW Series RS-422 GPI VTR DVR, DVW Series BVE-9100 VTR DVR, DVW Series RS-422 Note: In this diagram, some Sony models are shown. Other models of peripheral equipment are also supported. RS-422 Digital Disk Recorder GPI Character Generator RS-422 RS-422 RS-422 RS-422 RS-232C Digital Video Effects DME Series Video Switcher DVS-2000C Note: User-supplied Graphics Tablet, Wacom-IV compatible. May require a null modem adaptor. 34 Installation Guide DVS-2000C Product Guide

40 Appendix A. Feature List DVS-2000C Feature Review CLEAR AUTO TRANS This Appendix provides a table of DVS-2000C features, along with brief descriptions of each. All features are cross-referenced in the index. Note that all features discussed in this section use Sony terminology. DVS-2000C Product Guide Appendix A. Feature List 35

41 DVS-2000C Features The following features are included with the DVS-2000C switcher. DVS-2000C Features Feature Description 4 SDI inputs The DVS-2000C has 4 standard SDI inputs (loop through). Optional input capability Twelve optional inputs can be configured as a combination of SDI and component analog. Optional input boards are required. 3 Program outputs Three identical program video outputs are provided. 2 Effects Keyers Two standard effects keyers are provided, each of which has the capability of Linear, Luminance, Clean (self-key), Pattern Key, and Priority keys. Color Adjustment LCD Screen FlexiPad Editor Interface DME Interface The V-Proc feature allows the user to adjust input video, setup, hue and saturation for all inputs. A clear, bright LCD screen provides easy access to operational parameters, adjustments, and setups. The FlexiPad allows the user to enter wipe patterns, store and recall panel snapshots, and enter transition rates from one location. The switcher communicates with the BVE-2000 and BVE-9100 editing systems via serial interface, and Sony s status reporting feature. The DME interface (DME-LINK) enables specified DME-3000 and DME-7000 effects to be run by the switcher s fader just like wipes and dissolves. You can also control the Auxiliary bus option (BKDS- 2061) from the DME. 14 Wipe/Pattern Generators Fourteen independent wipe/pattern generators are provided, for the primary mix/effects bus as well as the switcher s keyers, border generators, color background mattes, key mask and sub mask. 24 Basic Wipe Patterns A basic set of 24 wipe patterns are included. Extensive pattern modifiers are provided. 11 Enhanced Wipe Patterns An additional set of 11 patterns are included with the BKDS-2070 option (star, heart, matrix and diamond dust). Extensive pattern modifiers are provided. 8 dual color matte generators Eight independent dual color matte generators are provided for primary color backgrounds, pattern borders, key fills and key mattes, with the DSK and border generator options installed. Each includes a dedicated pattern generator for creating washes. Utility Bus Snapshot memories Over-sampling FineKey V-Proc This feature allows you to insert a separate video signal inside wipe patterns and key borders. This feature provides the ability to store and recall 30 control panel snapshots through the FlexiPad. With the BKDS-2072 option installed, the number of snapshot memories is increased to 99. This feature allows the user to fine tune and optimize the key signal itself independent of the fill signal. A video processing system that allows you to adjust each input s levels to compensate for errors in image acquisition. 36 Appendix A. Feature List DVS-2000C Product Guide

42 Appendix B. Related Resources Related Resources The following resource information is included in this Appendix: Printed Media Audio/Video Media Printed Media Use the following printed publications for more information on the DVS-2000C: Refer to the DVS-2000C Product Brochure for an overall discussion of the product and its features, system configurations, and specifications. P/N: V A Refer to the DVS-2000C User s Guide E1 for a discussion of all operating issues. P/N: Refer to the DVS-2000C E1 Installation Guide for a discussion of all installation issues. P/N: DVS-2000C Product Guide Appendix B. Related Resources 37