SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY

Transcription

1 ZETTLER DISPLAYS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY CUSTOMER APPROAL PART NO. : ATM0700L47-T (ZETTLER DISPLAYS) ER1.0 APPROAL COMPANY CHOP CUSTOMER COMMENTS ZETTLER DISPLAYS ENGINEERING APPROAL DESIGNED BY CHECKED BY APPROED BY

2 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE 1.0 DOCUMENT REISION HISTORY Change No. Date Subject And Reason ersion No. Responser NEW 1.0 ZETTLER DISPLAYS 2/20

3 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE 1.0 CONTENTS --. COER DOCUMENT REISION HISTORY CONTENTS OERIEW ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS Typical Operation Conditions Current Consumption Power Signal sequence Backlight INTERFACE CONNECTION CN1(Input Signal) INPUT SIGNAL(DE ONLY MODE) Timing Specification Timing sequence(timing chart) OPTICAL CHARACTERISTICS RELIABILITY TEST Temperature and humidity Shock and ibration Electrostatic Discharge Judgment standard Touch Screen Related Parameters MECHANICAL DIMENSION LCD Module Touch Assembly PACKING FORM WARRANTY ZETTLER DISPLAYS 3/20

4 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE OERIEW ATM0700L47-T is 7 color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD panel, driver ICs,control circuit and LED backlight. By applying images are displayed on the 7 diagonal screen. Display 16.7Mcolors by R.G.B signal input. General specification are summarized in the following table: ITEM SPECIFICATION Display Area (mm) (H) x 85.92() Number of Pixels 1024(H) 3 (RGB) 600() Pixel Pitch (mm) (H) x () Color Pixel Arrangement RGB vertical stripe Display Mode Normally white Number of Colors 16.7M Brightness (cd/m^2) 400nit(typ) Response Time (ms) 25ms(typ.) Contrast Ratio 800:1 iewing Angle ( CR 10) 160degree (Horizontal.) 130degree (ertical) Power Consumption (W) TBD Interface connection LDS 40pin Min. Typ. Max. Module Size (mm) Horizontal (H) ertical () Depth (D) w/o FPC Assembly size(mm) 164.9(H)x100.0()x7.1(D) Module Weight (g) TBD Backlight Unit LED Surface Treatment Anti-Glare ZETTLER DISPLAYS 4/20

5 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE ABSOLUTE MAXIMUM RATINGS The following are maximun values which, if exceeded, may cause c faultyy operation ordamage to the unit. Item Symbol Min. Max. Unit Digital Supply oltage Analog Supply oltage Gate On oltage Gate Off oltage Gate On-Gate Off oltage DD DD_LDSS ADD GH GL GH-GLL NIN0 ~ NIN Signal Input oltage PIN0 ~ PIN3 NINC,PINCC Forward Current (per LED) Reverse oltage (per LED) Pulse forward current (per LED) Operation Temperaturee Storage Temperature Note: If R Ifp Top Tstg ma ma *1) If users use the product out of the operation and storage range,it will have quality is sue. *2) Ifp Conditions : Pulse Width 10msec, Duty 1/10 *3) Each one of LED operation must be follow diagram of Ambient Temperature and Allowable Forward Current. Note Note *2) Note *1) Note *1) *4) If users use the product out off the environmemtal operation range(temperature and humidity), it will have visual quality concerns. ZETTLER DISPLAYS 5/20

6 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE ELECTRICAL CHARACTERISTICS 3.1. Typical Operation Conditions Item Symboll MINN TYP MAX M Digital Power Supply DDD oltage For LCD DDD_LDS UNIT NOTE Logic Input oltage (LDS:IN+,IN-) CM ID TH IDD ID m m Note 1 Note 1 CM=1.2 Note 1 TL m Analog Power Supply oltage ADD Gate On Power Supply oltage GH Gate Off Power Supply oltage GL Common Power Supply oltage COM Note 2 Logic Input oltage IH IL 0.7*DDD - GNDD - DDD 0.3*DDD Note1:LDS signal LDS IN+ LDS IN- Note2:Please adjust COM to make the flicker level be minimum. ZETTLER DISPLAYS 6/20

7 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE Current Consumption Item Symbol Condition Min. Typ. Max. Unit Note Gate on power current IGH GH = ma Note 1 Gate off power current IGL GL= ma Note 1 Digital power current IDD DD = ma Note 1 Analog power current IADD ADD = ma Note 1 Total Power Consumption PC mw Note 1 Note 1: Typical: Under 256 gray pattern Maximum: Under black pattern 256 gray pattern Black pattern 3.3. Power Signal sequence Power On:DDD ADD/GL GH ideo &Logic Signal Backlight Power Off:Backlight ideo &Logic Signal GH ADD/GL DDD ZETTLER DISPLAYS 7/20

8 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE Backlight 3.4 Ta= =25 ITEM SYMBOL CONDITIONS MIN TYPP MAX UNIT NOTE LED current IL Ta=25 (25mA/series) ma LED voltage L Ta=25 (25mA/series) Power consumption WL Ta=25 (25mA/series) W LED Lifetime - Ta=25 IF=25mAA Hr Remarks: *1) LED Circuit Diagram ZETTLER DISPLAYS 8/20

9 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE 1.0 A LED 电路图 ( ) *2) A:Anode(+),K:Cathode(-) *3) Suggestion: Using the constant current control to avoid the leakage light and brightness quality issue. *4) Definition of Led lifetime:luminance < Initial luminance 50%. K ZETTLER DISPLAYS 9/20

10 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE INTERFACE CONNECTION 4.1. CN1 (Input Signal) PIN NO. SYMBOL DESCRIPTION REMARKS 1 COM Common voltage 2 DDD Digital power 3 DDD Digital power 4 NC Not connect 5 RESET 6 STBYB 7 GND Ground Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=10KΩ,C=1μF) Standby mode, normally pull high STBYB= 1, normal operation STBYB= 0,timing control, source driver will turn off, all output are high-z 8 RXIN0- Negative LDS differential data inputs 9 RXIN0+ Positive LDS differential data inputs 10 GND Ground 11 RXIN1- Negative LDS differential data inputs 12 RXIN1+ Positive LDS differential data inputs 13 GND Ground 14 RXIN2- Negative LDS differential data inputs 15 RXIN2+ Positive LDS differential data inputs 16 GND Ground 17 RXCLKIN- Negative LDS differential clock inputs 18 RXCLKIN+ Positive LDS differential clock inputs 19 GND Ground 20 RXIN3- Negative LDS differential data inputs 21 RXIN3+ Positive LDS differential data inputs 22 GND Ground 23 NC Not connect 24 NC Not connect 25 GND Ground 26 NC Not connect 27 NC Not connect 28 SELB 6bit/8bit mode select *1) 29 ADD Power for Analog Circuit 30 GND Ground 31 LED- LED Cathode 32 LED- LED Cathode 33 L/R Horizontal inversion *2) 34 U/D ertical inversion *2) 35 GL Negative power for TFT 36 NC Not connect 37 NC Not connect 38 GH Positive power for TFT ZETTLER DISPLAYS 10/20

11 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE LED+ LED Anode 40 LED+ LED Anode Remarks: *1) if LDS input data is 6bits,SELB must be set to High If LDS input data is 8bits,SELB must be set to Low *2)U/D and L/R control function UD LR FUNCTION 0 1 Normal display 0 0 Inverse Left and Right 1 1 Inverse Up and Down 1 0 Inverse Left and Right Inverse Up and Down Up Left Right Down ZETTLER DISPLAYS 11/20

12 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE INPUT SIGNAL(DE ONLY MODE) 5.1. Timing Specification LDS input signal sequence LCD input signal sequence DENA (Input LDS Transmitter) 2. Timing sequence(timing chart) 5.2 ITEM CLK Frequency Horizontal ertical Horizontal total Timee Horizontal effective Time Horizontal Blank Timee ertical total Time ertical effective Timee ertical Blank Timee Horizontal Timing Sequence: SYMBOL MIN M TYP MAX UNIT tclk MHz th tclk tha 1024 tclk thb tclk t th ta 600 th tb th ertical Timing Sequence: ZETTLER DISPLAYS 12/20

13 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE LDS Inputt Data mapping 6 Bit LDS input 8 Bit LDS input ZETTLER DISPLAYS 13/20

14 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE OPTICAL CHARACTERISTICS Taa = 25, CC=3.3 ITEM Panel Transmittance SYMBOL T CONDITIONS MIN TYP MAX UNIT % NOTE Contrast Ratio Luminance(CEN) CR LW Point-5 Point cd/m 2 1,2,3 1,3 Luminance Uniformity L % 1,3 Response Time (White - Black) Tr +Tf Point ms 1,3,5 iewing Angle NTSC Horizontal ertical - Left(ψ) Right( ψ) Upper( (θ) Down( (θ) Point-5 CR 10 Point % ,3 1,3 1,2,4 White Wx Wy Rx Red Color Ry Point ,3 Coordinate Gx Green Gy Bx Blue By Note1: Measure condition: 25 ±2, 60±10%RH, under10 Lux in the dark d room.bm-5a (TOPCON), viewing angle2, IL=225 ma (Backlight current), measurement after lighting on 10 mins. Note2:Definition of contrast ratio: Contrast Ratio (CR)= (White) Luminancee of ON (Black) Luminance of OFF ZETTLER DISPLAYS 14/20

15 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE 1.0 Note3: Definition of luminance:measure whitee lu minance on the point 5 as figure..6-1 Definition of Luminance Uniformity: Measure white luminance on the point1~99 as figure.6-1 L = [L(MIN)/L(MAX)] 100 (H)) (H/2) (H/3) (H/3) (H/2) (H) (H/3) (H/3) Fig.6-1 Measuring point Note 4:Definition of iewing Angle( (θ, ψ),referr to Fig.6-2 as below: Fig.6-2 Definition of iewing Angle Note5:Definition of Response Time.(White-Black) Fig.6-3 Definition of Response Time(White-Black) ZETTLER DISPLAYS 15/20

16 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE RELIABILITY TEST 7.1. Temperature and humidity TEST ITEMS CONDITIONS NOTE High Temperature Operation High Temperature Storage 70 ;240hrs 80 ; 240hrs High Temperature High Humidity Operation 60 ; 90%RH ;240hrs No condensation Low Temperature Operation -20 ; 240hrs Backlight unit always turn on Low Temperature Storage -30 ; 240hrs Thermal Shock 20 (0.5hr) ~ 70 (0.5hr) ; 100 Cycles Image Sticking 25 ; 4hrs MTBF 200,00hrs Note 1: Condition of Image Sticking test:25 ± 2 Operation with test pattern sustained for 4 hrs, then change to mid-gray pattern immediately. After 5 mins, the mura must be disappeared completely. lmage Sticking -pattern 7.2. Shock and ibration ITEMS Shock (Non-operation) ibration (Non-operation) 7.3. Electrostatic Discharge Mid-Gray pattern CONDITIONS Shock level: 980m/s 2 (equal to 100G). Waveform:1/2 Sine wave,6msec. ±X,±Y,±Z,each axis 1 times Frequency range:8~33.3hz Stoke:1.3 mm ibration: sinusoidal wave, perpendicular axis(both x, z axis: 2Hrs,y axis 4Hrs). Sweep: 2.9G,33.3 Hz -400 Hz Cycle: 15 min TEST ITEM CONDITIONS Note ESD 150pF,330Ω,±8k&±15k air& contact test 1 200pF,0Ω,±200 contact test 2 Note: Measure 1: LCD glass and metal bezel 2: IF connector pins 7.4. Judgment standard The Judgment of the above test should be made as follow: Pass: Normal display image and no line defect. Partial transformation of the module parts should be ignored. Fail: No display image, Function NG, or line defects. ZETTLER DISPLAYS 16/20

17 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE MECHANICAL DIMENSION 8.1. LCD Module H G ±0.30(LCM Outline) (Bezel Open) (Polarizer_Up) (LCM A.A.) *5.50 (80.96) F E (2.71) (2.85) (3.853) RGB Resolution1024(RGB)X600 Display Center D C B A H G F E D C B A (47.74) 85.92(LCM A.A.) 87.92(polazier_Up) 89.10(Bezel Open) ±0.30(LCM Outline) RoHS A K Notes: 0.50±0.10 w=0.35 d= Unit:mm 2.Do not scale drawing. P0.5*(40-1)=19.50± All radii without dimension R0.2 4.Uniformity : 75%(Min) 5.The color coordinates: 20.50±0.07 DETAIL A SCALE 4:1 MIN TYP MAX x y n Modification rev.number 7.draft angle Genral Tolerance:± Mark mold cavity indentification in recess approximately where indicated. 10. "*" For important dimension;( ) for reference dimention 11. RoHs must be complied.(use Lead-free process) (67.55) A K Mating connector 0,30±0.05 P/N:FH12A 40S 0.5SH(55) A ZETTLER DISPLAYS 17/20

18 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE Touch REAR H FRONT G F E D C B A H G F E D C B A TP 97.8± (OUTLINE) TP 163.3±0.2 (4.9) (1.3) (2.2) (.A.) (A.A.) 1.6± Y1 DOUBLE TAPE ITO Glass ITO Film.A/A.A 89.2 FRONT REAR X2 X1 89.2(A.A.) 89.8(.A.) 97.8(OUTLINE) Y2 CONDUCTOR 36± ± ±0.3 STIFFENER Y1 X1 X P1*(4-1)=3± ± ±0.05 1±0.2 Y2 1 4 TP LAYOUT Parameters: 1 Operating voltage: DC5; 2 Operating force: 40~100g; 3 Linearity 1.5%;Insulation resistance>10mω,(25dc); 4 Working temperature: -20 ~ % ~ 90%RH; 5 Storage temperature: -20 ~ % ~ 85%RH; 6 Transmittance >75%; 7 Structure: Film + Glass; 8 ITO-Film: Anti glare; 9 Response time<10ms; 10 electrode resistance: 200~900 ohms; 11 Unspecified tolerance:+/-0.3mm ZETTLER DISPLAYS 18/20

19 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE Assembly H G F E D ±0.30(LCM Outline) (Bezel Open) (Polarizer_Up) (LCM A.A.) *5.50 (80.96) (2.71) (2.85) (3.853) RGB Resolution1024(RGB)X600 Display Center C B A H G F E D C B A (47.74) 85.92(LCM A.A.) 87.92(polazier_Up) 89.10(Bezel Open) ±0.30(LCM Outline) RoHS A K Notes: 0.50±0.10 w=0.35 d= Unit:mm 2.Do not scale drawing. P0.5*(40-1)=19.50± All radii without dimension R0.2 4.Uniformity : 75%(Min) 5.The color coordinates: 20.50±0.07 DETAIL A SCALE 4:1 MIN TYP MAX x y n Modification rev.number 7.draft angle Genral Tolerance:± Mark mold cavity indentification in recess approximately where indicated. 10. "*" For important dimension;( ) for reference dimention 11. RoHs must be complied.(use Lead-free process) (67.55) A K Mating connector 0,30±0.05 P/N:FH12A 40S 0.5SH(55) A ZETTLER DISPLAYS 19/20

20 ATM0700L47-T(ZETTLER DISPLAYS) TFT MODULE Packing form TBD 10. WARRANTY 10.1 The period is within 12 months since the date of shipping out under normal using and storage conditions The warranty will be avoided in case of defect induced by customer ZETTLER DISPLAYS 20/20