Emergency lighting units EM powerled
|
|
- Job Bryan
- 5 years ago
- Views:
Transcription
1 E 15 W CE CPS ED Driver for AC and DC power supplies Product description ED Driver for mains operation with integrated Simple CORRIDOR FUCTIO (CF) For use in central battery systems For luminaire installation For the use with STARK CE 1500 EM 5 years guarantee Properties Constant current ED Driver with 470 ma output current Simple CORRIDOR FUCTIO (CF) with 10 % light level Constant current mode 10 or 100 % output when connected to DC SEV For emergency lighting systems as per E ED module and sensor available 66,5 79 È Product matrix, page 3 Wiring diagrams and installation examples, page 4 Technical data Rated supply voltage V Voltage range AC V Voltage range DC V Mains frequency 0 / 50 / 60 Hz Typ. mains power in emergency operation (10 % / 100 %) 1.6 W / 17 W Mains power in normal operation 17 W Mains power in CF operation 2 W Mains current in normal operation 0.1 A Mains current in CF operation A Mains current in emergency operation (10 % / 100 %) A / 0.08 A Output power in emergency operation (10 % / 100 %) 2 W / 17 W Typ. λ (at 230 V 50 Hz, normal operation) 0.8 Typ. λ (at 230 V 50 Hz, CF operation) 0.5 Typ. efficiency (at 230 V 50 Hz, normal operation) 83 % Typ. efficiency (bei 230 V 50 Hz, CF operation) 49 % eakage current (PE) 0 Overvoltage protection 320 V (for 1 h) Max. permitted forward voltage ED 33 V Turn on time (at 230 V, 50 Hz, full load) 100 ms Changeover time between mains and emergency < 380 ms Changeover time between emergency and mains < 100 ms Ambient temperature ta C Max. casing temperature tc 75 C Dimensions xbxh 123 x 79 x 31 mm Type of protection IP20 Ordering data Type Article number Packaging, carton Packaging, pallet 15W CE CPS pc(s). 560 pc(s). 0.1 kg Weight per pc. 1
2 Specific technical data Type Typ. output current Output current tolerance Output voltage range Typ. output power ormal operation at 100 % 15W CE CPS 470 ma 5 % V W CF operation at 10 % 15W CE CPS 43 ma 15 % V 1.12 W Emergency operation at 100 % 15W CE CPS 470 ma 5 % V W Emergency operation at 10 % 15W CE CPS 43 ma 15 % V 1.12 W Typ. output voltage = 30 V Product description Motion detector for luminaire installation Motion detection through glass and thin materials (except metal) For automatic on/off switching of electronic ballasts with corridor- FUCTIO Bright-Out function: luminaire is not switched on if there is adequate brightness Delay time, detection range and light value for the Bright-Out function can be set via 3 potentiometers Max. installation height 5 m Infinitely variable range ( m) ACCES- SORIES SWITCH Sensor HF 5BP Automatic switching based on motion and light level Ordering data Type Article number Packaging, carton Weight per pc. SWITCH Sensor HF 5BP pc(s). 0,079 kg 2
3 Standards E E E E E E E according to E according to E E Mechanichal details Case manufactured from polycarbonate. Glow-wire test according to E with increased temperature of 850 C passed. Short-circuit behaviour In case of a short circuit on the secondary side (ED) the ED ouput is switched off. After elimination of the short circuit the nominal operation is restored automatically. Expected life-time Type ta = 45 C ta = 55 C 15W CE CPS tc 65 C 75 C ife-time 100,000 h 50,000 h o-load operation The ED Driver is not damaged in the no-load operation. The max. output voltage can be obtained during no-load operation. Storage conditions Humidity: 5 % up to max. 85 %, not condensed (max. 56 days/year at 85 %) Storage temperature: -40 C up to max. +80 C The devices have to be within the specified temperature range (ta) before they are operated. Maximum loading of automatic circuit breakers Automatic circuit breaker type B10 B13 B16 B20 Inrush current Installation Ø 1.5 mm mm mm mm 2 I max time 15W CE CPS A 120 μs Harmonic distortion in the mains supply (at 230 V / 50 Hz and full load) in % Type THD W CE CPS Ballast lumen factor (BF) in % Corridor mode DC operation 15W CE CPS /
4 Wiring diagram with sensor V 0/50/60 Hz PIR input CF 15 W CE CPS ED + Maintained Tridonic STARK CE Switching behaviour: CF Output ED off off off off on off on off 10 % on on 100 % DC operation behaviour: Emergency level at 10 % The sensor is not activ in DC operation. Tridonic Sensor PIR input 230 V Wiring diagram V 0/50/60 Hz DC operation behaviour: The emergency level (10 % or 100 %) depends on the polarity of the DC voltage. PIR input CF 15 W CE CPS ED + Maintained Tridonic STARK CE + + CF + Emergency level 100 % 10 % PIR input 230 V The mains power must be removed before changing the ED load. Secondary switching of EDs is not allowed and may cause damage to the EDs. The hot plug-in of EDs during normal operation may result in current peaks of up to 50% above the typical output current. 4
5 Wiring instructions The ED terminals are classified as SEV. Keep the wiring of the input terminals separated from the wiring of the SEV equivalent terminals or consider special wiring (double insulation, 6 mm creepage and clearance) when these connections should be kept SEV. ED leads should be separated from the mains connections and wiring for good EMC performance. Maximum lead length on the ED terminals is 3 m. For a good EMC performance keep the ED wiring as short as possible. IDC interface solid wire with a cross section of 0.5 mm² according to the specification from WAGO Horizontal interface solid wire with a cross section of mm² according to the specification from WAGO strip mm of insulation from the cables to ensure perfect operation of the terminals wire preparation: mm² mm oosen wire Installation instruction Max. torque for the mounting screws: 0.5 m / M4. You must make sure that the ED is connected with the correct polarity. EDs that are connected to should have polarity reversal protection such as a Schottky diode. There may be irreversible damage if the ED is connected with the wrong polarity. The protection device must be capable of handling a load of more than 700 ma. Additional information Additional technical information at Technical Data Guarantee conditions at Services o warranty if device was opened. 5
Emergency lighting units EM powerled
CE CPS 12/15 W ED Driver for AC and DC power supplies Product description ED Driver for mains operation with integrated Simple CORRIDOR FUCTIO (CF) For use in central battery systems For luminaire installation
More informationLED Driver Linear / area fixed output
Driver LC 10W 350mA fixc lp SNC2 ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 350 ma Max. output power 10.2 W Up to 80 % efficiency For
More informationLED Driver Compact dimming
Driver CA 15W 180-350mA flexc PH-C SR ADV ADVACED series Product description Dimmable constant current ED Driver (SEV) Independent ED Driver with cable clamps Selectable output current between 180, 250
More informationLED Driver Compact fixed output
Driver LC 45W 1050mA fixc C SNC ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 1,050 ma output power 45 W Nominal life-time up to 50,000
More informationPHASED OUT. LED control gear Compact fixed output. Driver LC 40W 900mA fixc C SNC China Domestic ESSENCE series
Product description Fixed output built-in LED Driver Constant current LED Driver Output current 900 ma Max. output power 40 W Nominal life-time up to 30,000 h For luminaires of protection class I and protection
More informationLED Driver Compact fixed output
Driver LC 40W 900mA fixc C SNC ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 900 ma Max. output power 40 W Nominal life-time up to 50,000
More informationLED control gear Compact fixed output. Uconverter LCI 55 W 1400 ma O010 TOP series Ø4,4. Ordering data
Product description 1-channel for indoor use Inbuilt for luminaires of protection class I Output current and output voltage adjustable FA output 12 V TC input channel ominal life of 50,000 h (at ta max.
More informationLED control gear Compact fixed output
Driver LC 40W 900mA fixc SR SNC ESSENCE series Product description Independent fixed output LED Driver Constant current LED Driver Output current 900 ma Max. output power 39 W Nominal life-time up to 50,000
More informationLED Driver Compact fixed output
Driver LC 10W 250mA fixc R ADV ADV series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 250 ma For luminaires of protection class II For ambient temperatures
More informationLED Driver Linear / area dimming industry. Driver LC 200W 1050mA UNV ADV IND ADVANCED series
Driver LC 200W 1050mA UNV ADV IND ADVANCED series Product description Independent constant current LED Driver For dry, damp and wet locations Max. output power 200 W Up to 93.7 % efficiency For luminaires
More informationLED control gear Compact dimming. Uconverter LCAI 2x38 W 0500 K013 one4all ECO series. Ordering data
Product description Dimmable built-in for LED Constant current (with 2 adjustable output channels) Designed for outdoor and street luminaire Output power 2 x 38 W Suitable for mains voltage peaks (burst/surge)
More informationLED Driver Linear / area dimming. Driver LCAI 38/75W TW lp Tunable White
Driver LCAI 38/75W TW lp Tunable White Product description 2-channel LED Driver with LI DT8 Output power: 38 W or 75 W Power input on standby < 0.3 W Nominal life-time up to 50,000 h 5-year guarantee Properties
More informationLED Driver Compact dimming
Driver LCA 17W 250 700mA one4all C PRE PREMIUM series Product description Dimmable built-in constant current LED Driver Adjustable output current between 250 and 700 ma via ready2mains Programmer, I-select
More informationLED Driver Compact dimming
Driver LCA 45W 500 1400mA one4all C PRE PREMIUM series Product description Dimmable built-in constant current LED Driver Adjustable output current between 500 and 1,400 ma via ready2mains Programmer, I-select
More informationLED Driver Linear / area dimming
Driver LCA 75W 350 1050mA one4all lp PRE PREMIUM series Product description Dimmable built-in constant current LED Driver Adjustable output current between 350 and 1,050 ma via ready2mains Programmer,
More informationHYL-080D1750G358. Constant current LED driver DALI Dimmable. LED Driver. Product description. Benefits. Interfaces.
Linear / area dimming Constant current LED driver DALI Dimmable Product description Dimmable built-in constant current LED Driver Adjustable output current between 1,050 and 1,750mA via DIP switch Max.
More informationHID control gear Electronic. PCIS, PCS outdoor FOX B011 PCI outdoor. Ordering data. Circuit power1. tc/ta for 60,000 h For luminaires with 1 lamp
Product description Pulse packets for increased ignition energy (pulsecontrol technology) Flicker-free light Colour stability thanks to constant power No acoustic resonance Safety shutdown if a lamp is
More informationLED Driver Compact dimming
Driver LCA 120W 350 1050mA one4all C PRE OTD PREMIUM Outdoor series Product description Dimmable built-in constant current LED Driver Output current adjustable between 350 1,050 ma via ready2mains Programmer,
More informationHYL-035D0850G103. Constant current LED driver DALI Dimmable. LED Driver. Product description. Benefits. Interfaces.
Constant current LED driver DALI Dimmable Product description Dimmable Independent constant current Adjustable output current between 350 and 1,050mA via DIP switch Max. output power 35 W Up to 88 % efficiency
More informationLED Driver Constant voltage
Driver LCA 150W 24V one4all SC PRE PREMIUM series Product description Dimmable 24 V constant voltage LED Driver for flexible constant voltage strips One4all interface and ready2mains enable different dimming
More informationLED Driver Compact dimming
Driver LCA 17W 250 700mA one4all SC PRE PREMIUM series Product description Dimmable built-in constant current LED Driver Can be either used build-in or independent with clip-on strain-relief (see accessory)
More informationOUT. HID control gear Electronic. PCIS, PCI, PCS outdoor DIM B011 PCI outdoor
Product description Pulse packets for increased ignition energy (pulsecotro technology) Flicker-free light Colour stability thanks to constant power o acoustic resonance Safety shutdown if a lamp is faulty
More informationT5, T8, TC-L. PC T5 PRO lp W V 50/60/0 Hz, HO. Electronic ballasts Linear lamps T5, T8 and compact lamps TC-L
T, T8, TC-L Electronic ballasts PC T PRO lp 80 W 0 0 V 0/0/0 Hz, HO L D,1 0, 1 side fixing feature side fixing feature ø,1 defined lamp warm start is 1. s constant light output independent of fluctuations
More informationHID control gear Electronic
HS HI S,, PCS outdoor DIM chronostep outdoor Product description Pulse packets for increased ignition energy (pulsecotro technology) Flicker-free light Colour stability thanks to constant power o acoustic
More informationOT 100/ /700 P5
OT 100/120 277/700 P5 OPTOTRONIC Outdoor Constant current LED drivers Areas of application _ Street and urban lighting _ Industry _ Suitable for luminaires of protection class I Product benefits _ High
More informationOPTOTRONIC Intelligent
OPTOTRONIC Intelligent Compact constant current LED drivers Dimmable DALI Areas of application _ Installation in emergency lighting systems according to IEC 61347-2-13, appendix J _ Suitable for use in
More informationPHASED OUT. HID control gear Electronic. PCIS, PCI, PCS outdoor DIM chronostep PCI outdoor
Product description Pulse packets for increased ignition energy (pulsecotro technology) Flicker-free light Colour stability thanks to constant power o acoustic resonance Safety shutdown if a lamp is faulty
More informationDALI TOUCHPANEL BASIC TW. Operating and control unit
BASIC Operating and control unit Product description Capacitive Touchpanel High-quality appearance with real glass display Multiple control modules are possible in a system Power supply via line Double
More informationDatasheet. LED Transformers. LED Transformer 120W 24V V. LED Transformers
LED Transformers Datasheet LED Transformers LED Transformer 120W 24V 220-240V Product description Philips full-electronic constant voltage LED Transformers are designed to operate 24VDC LED solutions used
More informationTechnical Information
Reference: For use with LED light engines Geometry (l x w x h): Line voltage, nominal Perm. voltage fluctuations Line current, nominal Inrush current, typical Line frequency Protection Class Output operating
More informationEmergency lighting units EM INVERTER
EM IVERTER TC-DE TC-TE TC-F TC-DD Tc EM MII BAIC, 0 0 V 0/0 Hz BAIC version roduct description Emergency lighting supply unit f manual testing F compact fluescent lamps mall dimensions ( x 0 mm cross-section,
More informationPHASED OUT. Emergency lighting units EM INVERTER. EM MINI BASIC, V 50/60 Hz BASIC version
EM IVERTER TC-DE TC-TE roduct description Emergency lighting supply unit f manual testing F compact fluescent lamps mall dimensions ( x 0 mm cross-section, 0 mm length) -year guarantee roperties h rated
More informationLED MODULES READYLINE DL
LED MODULES READYLINE DL BUILT-IN MODULE LED-MODULE READYLINE DOWNLIGHT DL WU-M-538 / WU-M-539 / WU-M-540 Typical Applications Downlights Replacement for CFL DIRECT MAINS CONNECTION REDUCED FLICKER HIGH
More informationOPTOTRONIC FIT. Product family datasheet. Linear / Area Constant Current Non dimmable. Areas of application. Product benefits.
OPTOTRONIC FIT inear / Area Constant Current Non dimmable Areas of application Installation in emergency lighting systems according to IEC 61347-2-3, appendix J Suitable for installation in emergency lighting
More informationOrdering data. Type Inputs Outputs Dimming switch Motion sensor DSI signal2 Digital control line DSI Control output per physical output (devices)
luxcotro lighting control system Control module for amplifying signals Product description Multi-functional controller For amplifying the signal for a maximum of 50 devices or for cascading long lines
More informationPRODUCT DATASHEET QTi DALI-T/E 2X18 42 DIM
QTi DALI-T/E 2X18 42 DIM QUICKTRONIC INTELLIGENT DALI DIM CFL ECG dimmable DALI for CFL AREAS OF APPLICATION Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100 Installation
More informationLuminaire installation box Surface-mounted box Ceiling installation box
-Smart PTM Ambient light sensor and motion detector for constant lighting control uminaire installation box Surface-mounted box Ceiling installation box Overview: -SMART PTM i is an ambient light sensor,
More informationCatalogue Ignitors and power switches for HID
Catalogue 2012 Ignitors and power switches for HID Overview Product overview Ignitor matrix Standards Page 6 Page 7 Page 8 Product information Ignitors and power switches for HID Page 9 Superimposed-pulse
More informationLXM23DU10M3X motion servo drive - Lexium 23 - single phase V - 1 kw - I/O
Characteristics motion servo drive - Lexium 23 - single phase 200...255 V - 1 kw - I/O Main Range of product Product or component type Device short name Complementary Format of the drive Network number
More informationSecto Design Oy Kauppalantie Kauniainen Finland tel fax
Secto Design Oy Kauppalantie 12 02700 Kauniainen Finland tel. +358 9 5050598 fax +358 9 5475 2535 info@sectodesign.fi www.sectodesign.fi Owalo 7000 pendant natural birch, black laminate or white laminate,
More informationIndoor Linear 80W Driver SI-C215280N2KR
Product Data Sheet Rev.00 2017. 2. 9 1# LED Driver Indoor Linear 80W Driver SI-C215280N2KR Constant Current LED Driver Features & Benefits Output Current Range: 1550mA Output Voltage Range: MAX 51 Vdc
More informationOperating instructions
108183 2017-05-17 Page 1 0359 Operating instructions TPPL-EX series Hazardous environments luminaires Please read the instructions carefully before starting any works! Content: 1. Safety instructions 2.
More information02/11/2015
DIN Rail Mount 17.5 mm MUS/MUSF 80 AC/DC Part number 84872141 Control relays monitoring their own power supply - MUS : Over/undervoltage control Selectable latching (memory) function - MUSF : Over/undervoltage
More informationHELVAR. CONTROLLABLE ELECTRONIC BALLASTS DALI & 1-10 V controllable ballasts STANDARD ELECTRONIC BALLASTS
Ballasts HELVAR CONTROLLABLE ELECTRONIC BALLASTS DALI & 1-10 V controllable ballasts 4-17 Helvar is an international lighting technologies company specialised in energy efficient components and solutions
More information10 SERIES. Light dependent relays A
10 SERES 10 SERES Relays for automatic control of lighting according to the ambient light level ntegral light sensor For pole or wall mounting 10.32-2 O 16 A output contacts 10.41-1 O 16 A output contact
More informationLED DRIVERS. LQC4D-V1 4 channels. User Manual FEATURES
pag. 1/13 FEATURES Outputs: 4 x channels BUS+SEQUENCER+FADER+DIMMER+DRIVER Input: DC 12/24/48 Vdc BUS Command: DALI LOCAL Command: 4x N.O. push button (with or without memory), 0-10V, 1-10V Controls: dimmer,
More information45 mm : all channels. Output indicator Yellow LED System status indicator Light source Infrared (880 nm) Opening angle +/ 4 Emission angle +/ 5
SPACEGUARD SERIES Description 1-12 metre sensing range 16 to 56 parallel scanning beams Active height of 0 mm to 2520 mm Detector length of 1928 mm to 2648 mm 3 different channel placement models Cable
More informationDatasheet - SRB-E-201ST
27.04.2016-16:36:21h Datasheet - SRB-E-201ST Multi-function safety modules / SRB-E-201ST STOP 0 Function 1 oder 2-channel control Start button / Auto-start Monitoring two-hand control panels to EN 574
More informationTri-level Control HF Sensor
Daylight Monitoring TM Ambient daylight threshold oop in oop out Tri-level Control HF Sensor HC403VRC-KD HC404VRC-KD Detached Version with Daylight Monitoring and Remote Control Applications Occupancy
More informationFLIR CM82: 600 Amp Power Clamp Meter with VFD Mode
Copyright All rights reserved worldwide. Names and marks appearing herein are either registered trademarks or trademarks of FLIR Systems and/or its subsidiaries. All other trademarks, trade names or company
More informationarchitecture mounting Features Product lighting
Intema High Fidelity Ambient Lighting Module Product Data Sheet The Intema ambient lighting module is a simple plug and play solution that enables highly uniform glare free lighting. The unique 240 degree
More informationQUICKTRONIC FIT 8. Product family datasheet. ECG for FL 26 mm
QUICKTRONIC FIT 8 ECG for FL 26 mm Areas of application _ Open-plan offices, corridors and storage rooms _ Public buildings _ Strip lighting _ Suitable for emergency lighting (DC operation) _ Suitable
More informationFigure 1: Device components
Order No. : 2860 10 Order No. : 2830 10 Operation- and Assembly Instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe
More informationClassic and advanced T8 LED tubes
Replacement of fluorescent tubes Classic and advanced T8 LED tubes The tubes "compatible" with the old ballasts make it unnecessary now to modify electrical installations or to make changes of any type,
More informationFLIR CM82: 600 Amp Power Clamp Meter with VFD Mode
Copyright All rights reserved worldwide. Names and marks appearing herein are either registered trademarks or trademarks of FLIR Systems and/or its subsidiaries. All other trademarks, trade names or company
More informationSPACESCAN SERIES SS 02
Description 0-10 metre sensing range 12 to 384 channels Available with channel spacing of 5, 10 or 20 mm Active length of 225 mm to 1920 mm Housing length of 300 mm to 1980 mm Plug connection 18-30 V dc
More informationInstallation and User Guide 458/CTR8 8-Channel Ballast Controller Module
Installation and User Guide 458/CTR8 8-Channel Ballast Controller Module Helvar Data is subject to change without notice. www.helvar.com i Contents Section Page Introduction 1 Installation 2 1. Attach
More informationAPPLICATIONS. Automatic warehouse. Trasportation lines
INDUCTIVE TUBULAR SENSOR M12 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating
More informationElectronic MICROSTAT-T Temperature controller with digital indication for use with resistance thermometers and thermocouples Series 8650
M. K. JUCHHEIM GmbH & Co Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.de
More informationPhotoelectrics Through-beam Type PA18C.T..., DC
Photoelectrics Through-beam Type, DC Miniature sensor range Range: 20 m (Axial), 16 m (Radial) Sensitivity adjustment by potentiometer Modulated, infrared light 850 nm Supply voltage: to 30 VDC Output:
More informationProduct Data Sheet 8506 VW-691
The engineer's choice 8506 VW-691 INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE
More informationQTi DALI 2X14/24/ DIM
QTi DALI 2X14/24/220 240 DIM QUICKTRONIC INTELLIGENT DALI DIM T5 ECG dimmable DALI for FL 16 mm Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100 Product benefits Same luminous flux with direct
More informationLINK-RAY TM MODULATORS FOR CONSTANT- VOLTAGE. LinkRay Modulators 12 V / 24 V Constant-voltage Applications MODULATORS
MUSIUM RESTAURANT SOUVENIR SHOP EXIT LinkRay Modulators 12 V / 24 V Constant-voltage Applications LINK-RAY TM MODULATORS FOR CONSTANT- VOLTAGE LINK-RAY TM MODULATORS FOR CONSTANT-VOLTAGE APPLICATIONS 186755
More informationDimmers SЕRIES. Kitchen light control. Bedroom light control. Living room light control
Kitchen light control Bedroom light control 15 SЕRES iving room light control ighting control in corridors (for hotels, offices and hospitals) FDER reserves the right to alter characteristics at any time
More informationE6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm
Low-cost Encoder with Diameter of 50 mm CSM DS_E An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. High-precision detection of automatic machine timing.
More informationluxcontrol lighting control system DALI actuator DALI PCD one4all G2 Leading-edge/trailing-edge phase dimmer
luxcotro lighting ctrol system DAI PCD 1-300 eading-edge/trailing-edge phase dimmer Product descripti Digital leading-edge and trailing edge phase dimmers Total cnected load: e4all input: DAI, DSI, and
More informationPHASED OUT. Control module with 3 channels/single, twin push to make switches/ presence detector/modulardim power supply
For DI rail luxcotro modulardim Control module with channels/single, twin push to make switches/ presence detector/modulardim power supply The control module is the basis of the modulardim product range.
More informationElectronic Panel Meters DIGEM Preference Program Process control, automation & laboratory uses Class 0.01 to 1 Current, Voltage, Frequency,
Electronic Panel Meters DIGEM Preference Program Process control, automation & laboratory uses Class 0.01 to 1 Current, Voltage, Frequency, Temperature, RPM, Pressure, etc. LED/ LCD displays 1999 to 99999
More informationQUICKTRONIC INTELLIGENT DALI DIM T8
QUCKTRONC NTELLGENT DAL DM T8 ECG dimmable DAL for FL 26 mm Areas of application _ Suitable for use in emergency lighting systems as per EN 50172/DN VDE 0108-100 _ nstallation in emergency lighting systems
More informationGenerator protection relay
Page 1 Issued: April 1999 Status: New Data subject to change without notice Features Off-the-shelf generator protection relay for small and medium sized power generators Three-phase time overcurrent and
More informationInterface Relays and Optocouplers Product group picture
Interface Relays and Optocouplers Product group picture /1 ABB Catalog 2CDC 1 004 C0208 Interface Relays and Optocouplers Table of contents Interface Relays and Optocouplers Interface Relays and Optocouplers
More informationPROXIMITY SWITCHES INDUCTIVE TUBULAR SENSOR M30 SERIES HIGHLIGHTS APPLICATIONS
INDUCTIVE TUBULAR SENSOR M30 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating
More informationrelays Electromechanical 2006 /2007
1 Electromechanical relays 2006 /2007 miniature relays industrial relays automotive relays interface relays plug-in sockets and accessories 2 Relays and Sensors - our business! Established in 1935 to manufacture
More informationLC3D115M7 TeSys D - star delta starter - 3 x 3P (3 NO) A V AC coil
Characteristics TeSys D - star delta starter - 3 x 3P (3 NO) - 115 A - 220 V AC coil Main Range Product name Product or component type Device short name Contactor application Utilisation category Device
More information1. General Specification
1. General M 7" production OEM production faytech Article-Number: Article-Number: FT700TVGA FT700TVGA EAN-Code: 4260170316141 7" panel with 800x480 panel resolution brightness 400Nits, contrast ratio 500:1,
More informationOperating Instructions Dimmer for V Incandescent Lamps
Operating Instructions Incandescent Lamps 1. Safety instructions Attention: Electrical equipment must be installed and fitted only by qualified electricians and in observance of the current accident prevention
More information1 Safety instructions. 2 Device components. 3 Function. Light Management Relay switch insert 2-channel. Art.-No.: 1202 URE.
Art.-No.: 1202 URE Operationsmanual 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe the instructions may cause damage to
More informationFiber-Optic Sensor Amplifiers E3S-X3, E3X-NL and E3X-NM Discontinued March 2012; Revised Replacements
NO: PH-165 PRODUCT: E3S-X3, E3X-NL, E3X-NM DATE: August 2012 TYPE: Discontinuation Update Fiber-Optic Sensor Amplifiers E3S-X3, E3X-NL and E3X-NM Discontinued March 2012; Revised Replacements Affected
More informationSINAMICS G130. dv/dt filter plus Voltage Peak Limiter. Operating Instructions 03/2013 SINAMICS
SINAMICS G130 Operating Instructions 03/2013 SINAMICS s dv/dt filter plus Voltage Peak Limiter Safety information 1 General 2 SINAMICS SINAMICS G130 Operating Instructions Mechanical installation 3 Electrical
More informationSlot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) * EE-SX/6 Photomicrosensor with 0- to 00-mA direct switching capacity for built-in application. Series includes models that
More informationAF-300 E11 Adjustable Frequency Drive
AF-300 E11 Adjustable Frequency Drive The AF-300 E11 adjustable frequency drive is GE s new generation of micro drives. GE recognized your need for a high-performance, full-featured compact drive and designed
More informationDatasheet - SRB301LC 24VAC/DC
25.02.2016-18:05:23h Datasheet - SRB301LC 24VAC/DC Guard door monitors and Safety control modules for Emergency Stop applications / General Purpose safety controllers (Series PROTECT SRB) / SRB301LC Preferred
More informationBenefits. Applications
COINlight Pro - CP51 Preliminary Data Sheet Benefits Fits in MR16 luminare fixtures Usage without additional heat sink possible - 3.6 W with 50,000h @L70/Ta=25 C - 7.5 W with 25,000h @L70/Ta=25 C Life
More informationThank you for purchasing a qualiton APR204 preamplifier!
Introduction Thank you for purchasing a qualiton APR204 preamplifier It is designed to deliver a high standard of musical performance. The innovation in engineering and manufacturing this product guarantees
More informationPRELIMINARY Sunny Boy 240-US
PRELIMINARY Sunny Boy 240-US SB 240-US-10 Optimized reliability Simple installation Unrivaled monitoring SMA-backed security Multigate technology allows for reduced component count Private band powerline
More informationLC2D09E7 REVERSING CONTACTOR 575VAC 9A IEC
Product datasheet Characteristics LC2D09E7 REVERSING CONTACTOR 575VAC 9A IEC Price* : 86.25 GBP Main Range Product name Product or component type Device short name Contactor application Utilisation category
More information1.5mm amplitude at 10 to 55Hz frequency in each X, Y, Z direction for 2 hours 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times
Color Mark Color Mark Feature Outstanding color matching accuracy - RGB light emitting diodes and 12-bit resolution - 2 detection modes (color only / color + intensity) - -step sensitivity adjustment for
More informationFibre Optic Modem ODW-611
Fibre Optic Modem ODW-611 PROFIBUS DP to fibre optic link, point-to-point applications The ODW-611 is a fibre optic modem designed for point-to-point fibre optic connections between PROFI- BUS DP networks.
More informationLC3D80B7 TeSys D - star delta starter - 3 x 3P (3 NO) - 80 A - 24 V AC coil
Characteristics TeSys D - star delta starter - 3 x 3P (3 NO) - 80 A - 24 V AC coil Price* : 4058.00 USD has not been replaced. Please contact your customer care center for more information. Main Range
More informationODW-621. RS-232 Point-to-point applications
Re-timing Data rate up to 250 kbit/s 9-position D-sub connector Redundant power supply inputs Status interface for fault indication Fibre link fault indication (Red) Design for harsh environments 40 to
More informationLC3D180AV7 TeSys D - star delta starter - 3 x 3P (3 NO) - 18 A V AC coil
Characteristics TeSys D - star delta starter - 3 x 3P (3 NO) - 18 A - 400 V AC coil Main Range Product name Product or component type Device short name Contactor application Utilisation category Device
More informationGPON EDFA with WDM for IP(OLT) Wavelengths Multiple Optical Outputs
ED5219LGT Series GPON EDFA with WDM for IP(OLT) Wavelengths Multiple Optical Outputs The ACI ED5219LGT series is a high-power multi-ports EDFA optical booster with gain spectrum bandwidth from 1545 to
More informationRadio receiver EXL. 4-channel / up to 1000 memory locations. Mounting and operating instructions for qualified electricians
Radio receiver EXL 4-channel / up to 1000 memory locations Mounting and operating instructions for qualified electricians Please keep these instructions so that you have them available if you have any
More informationLC1D32P7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 32 A V AC 50/60 Hz coil
Characteristics TeSys D contactor - 3P(3 NO) - AC-3 -
More informationLC1D09FE7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A V AC coil
Product datasheet Characteristics LC1D09FE7 TeSys D contactor - 3P(3 NO) - AC-3 -
More informationAPPLICATIONS. Automatic warehouse. Trasportation lines
INDUCTIVE TUBULAR SENSOR M8 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating
More informationSTBART0200K standard analog input kit STB - 2 I - 15 bits + sign
Product data sheet Characteristics STBART0200K standard analog input kit STB - 2 I - 15 bits + sign Main Range of product Product or component type Kit composition Analogue input type Analogue input number
More informationLC1D12P7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A V AC coil
Characteristics TeSys D contactor - 3P(3 NO) - AC-3 -
More informationSingle Point Flow Monitor SW118 SW119
SW8 SW9 SW8 SW9 Single point flow monitors with MIN/MAX monitoring function, suitable for water, oil, air and media with similar thermal conductivities (selectable by means of a medium switch). With either
More informationR Rxx-Vxxxx-L334-x
CEZOS 81-534 Gdynia POLAND, Olgierda 88/b tel. +48 58 664 88 61 cezos@cezos.com www.cezos.com Date: 29.08.2016 Revision 1.2 INTRODUCTION RGBW LED module is an advanced light source designed for the best
More information