1. Basic safety information 4 2. Proper use 4

Transcription

1 EN Digital twilight switch LUNA 120 top / Basic safety information 4 2. Proper se 4 Disposal 4 3. Installation and connection 5 Monting the time switch 5 Connecting the cable 7 Disconnecting the cable 7 Connection/installation of light sensor 8 4. Device description 10 1

2 Display & bttons 10 Operating instrctions 11 Overview of navigation men 12 Initial operation Settings and fnctions 14 Set lx vales 14 Set delay 15 Program switching time 16 Delete switching program 17 Activating PIN code 18 Setting manal or permanent switching 19 Hor conter 20 Using the OBELISK top2 memory card 20 Resetting the twilight switch 21 2

3 6. Technical data Contact 23 3

4 1. Basic safety information! WARNING Danger of death throgh electric shock or fire! ¾Installation shold only be carried ot by a qalified electrician! The device is designed for installation on DIN top hat rails (in accordance with EN 60715)! OBELISK top2 memory card: Avoid mechanical overload and contamination dring storage/transportation 2. Proper se!! The digital twilight switch is sed for lighting eqipment (streets), external stairways, display windows, entrances etc. Only for se in closed, dry rooms Sensor is installed in the open-air Do not se on safety devices, e.g. escape rote doors, fire safety eqipment etc. Disposal ¾Dispose of device in environmentally sond manner 4

5 3. Installation and connection Monting the time switch WARNING Danger of death throgh electric shock or fire! ¾Installation shold only be carried ot by a qalified electrician! click 5

6 45 cable Load line connection Plg-in screwless terminal NC contact Test tap OBELISK top2 memory card ( ) ¾Mont on DIN top hat rails (as defined in EN 60715) ¾Switched voltage-free ¾Ensre device cannot be switched on ¾Check absence of voltage ¾Earth and bypass ¾Cover or shield any adjacent live components 6

7 Connecting the cable Wiring diagrams LUNA 120 top2 L N max. 100 m C N LL ¾Strip cable to 8 mm (max. 9) ¾Insert cable in the open DoFix plg-in terminal at 45 LL2 cables per terminal position possible ¾To open the DoFix plg-in terminal, press screwdriver downwards Disconnecting the cable ¾ Use the screwdriver to psh the load line connection opener downwards 7

8 Connection/installation of light sensor!! Take length of connection cable into accont: max. 100 m (2 x 1.5 mm 2 ), max. 50 m (2 x 0.75 mm 2 )!! Avoid rnning sensor wiring parallel to mains power cables ¾Ensre correct polarity. Disconnect power sorce Monting light sensor ¾Monting light sensor: mm 2, strip cable by 10 mm (max. 11 mm) max. o4mm 8

9 Installing light sensor ¾Installing light sensor: mm 2, strip cable by 8 mm (max. 9 mm) max. 8mm O 15,2 mm 0,75 mm 2 < 50m 2 1,5 mm < 100 m ca. 38 mm 9

10 4. Device description Display & bttons Programmed switching times Date display Channel stats C1, C2 ON = On OFF = Off DCF antenna display Snrise/snset display Time display Days of the week from 1 to 7 Display of the active bttons with the relevant fnction MENU MENU OK OK Activate display Open men Cancel men ESC (leave men) Options are displayed Save selection Confirm selection 10

11 Operating instrctions 1. Read text line text/symbol represents qery 2. Make a decision YES Confirmation Press OK NO Modify/ Change Press t 11

12 Overview of navigation men MENU C1 OFF C2 OFF 9:40 46 LIGHT PROGRAM TIME/DATE ON DELAY FREE 56 TIME OFF DELAY NEW SET DATE END CHECK SU--WI MODIFY WEEK DAY DELETE END FORM DATE FORM TIME END MANUAL OPTIONS END PERM ON PERM OFF OVERRI ON TIMER HOLIDAY END OPERATING HOUR LCD ILLUMINATION LANGUAGE PIN FACTORY SETTINGS INFO END 12

13 Initial operation DEUTSCH ENGLISH ESPANOL FRANCAIS... FORM DATE YEAR MONTH DAY FORM TIME HOUR MINUTE SU-WI EUROPE C1 ON C2 OFF 9:40 46 ¾Set langage, date, time as well as smmer/winter time (SU-WI) ¾Press any btton and display follows on screen (see figre) LLIf a sensor is connected, the measred lx vale appears on screen (only dring mains operation). 13

14 5. Settings and fnctions Set lx vales MENU OK 2 Lx 2000 LUNA 120 top2 1 ¾Set desired range from lx with a screw tab a screwdriver on the potentiometer setting LLThe red LED lights p as soon as the set lx vale falls below the ambient brightness level Typical brightness vales Daylight (bright) lx Office accommodation 500 lx Hallways and stairs lx Street lighting 15 lx Fll moon ca. 0,3 lx 14

15 Set delay MENU LIGHT ON DELAY or OFF DELAY MINUTE MINUTE SECONDS SECONDS LLAn on/off delay of 1 minte is preset to avoid falty operation cased by lightning, car headlights etc. When the delay ends the channel stats will flash ON/OFF. ¾Press MENU ¾Select LIGHT and press OK to confirm ¾Select ON DELAY, confirm with OK ¾MODIFY HOUR, se the + or bttons to change hor and minte and confirm with OK. 15

16 Program switching time MENU PROGRAM MEM FREE 56 NEW CHECK NIGHT BREAK HOUR or LIGHT ON MODIFY MINUTE DELETE END MONDAY DURATION UNTIL Start time Copy switching to other days of the week. The day of the week always relates to a start time ª COPY ADD TUESDAY SAVE SAVE ª Switching time for one day LLA switching time always consists of a start time and an end time LLThere are 56 memory cells available Example: Switch on sports hall lighting from Mon Fri, 7:30 to 12:00 hrs ¾Press MENU ¾Select PROGRAM and press OK to confirm ¾Select NEW, confirm with OK ¾Select NIGHT BREAK or LIGHT ON, confirm with OK ¾Set reqired trn-on time (Mo Fr, 7:30), confirm with OK ¾Set DURATION UNTIL, confirm with OK ¾Select COPY, confirm with OK ¾ADD TUESDAY is displayed, confirm by pressing OK and also confirm the days We, Th, Fr by pressing OK. ¾Contine with ntil SAVE is displayed. ¾Confirm by pressing OK. 16

17 Repeat all steps for the trn-off time, however instead of selecting ON with select OFF and enter 12:00 for hor and minte. Delete switching program MENU PROGRAM CHANNEL C1 STANDARD NEW EXTRA 1 CHECK EXTRA 2 MODIFY END DELETE SINGLE DELETE ALL ¾Press MENU ¾Select PROGRAM and confirm with OK ¾Select DELETE, confirm with OK ¾Select SINGLE or DELETE ALL, confirm with OK 17

18 Activating PIN code The PIN code is set in OPTIONS via the men. LLIf yo have forgotten yor PIN, call the Theben Hotline. LLHave the serial nmber ready MENU OPTIONS SENSORS OPERATING HOUR EXT- INPUT LCD LLUMINATION LANGUAGE PIN FACTORY SETTING NO PIN WITH PIN CURRENT PIN INFO NEW PIN END

19 Setting manal or permanent switching Manal or permanent switching can be set via the men in MANUAL or (in the atomatic screen) by btton combination (see pictre). Manal control: Reversing the channel stats to the next atomatic or programmed switching. Permanent switching: As long as a permanent switching (on or off) is activated, the programmed switching times and switching thresholds are ineffective ok Chanel C1 Chanel C2 Activating manal control ¾Briefly press both bttons simltaneosly Activating permanent switching ¾Press both bttons simltaneosly for 2 seconds Cancelling manal/permanent switching ¾Press both bttons simltaneosly 19

20 Hor conter The operating hors of the channel (relay) are displayed and deleted in the OPTIONS men. If the nmber of operating hors exceeds the vale set in the Service men, SERVICE will appear in the display. Example: Replace a lamp after after 5,000 h. ¾Delete operating hors or set a higher vale in Service (e.g. to 10,000 h) Using the OBELISK top2 memory card All fnctions can also be set on the PC sing the OBELISK software and transferred to the device via the memory card. ¾Insert memory card in the time switch ¾Read in/ot saved switching times and device setps in the time switch or start Obelisk program ¾Remove memory card after copying etc.!! Avoid mechanical overload and contamination dring storage/transport LLPC software OBELISK top2 available at 20

21 Copying OBELISK LUNA This copies the switching program and optionally all time switch settings (e.g. external inpt, time format etc.) from the memory card in the time switch. Copying LUNA OBELISK This copies all switch programmes and settings from the time switch to the memory card. Starting OBELISK program Takes on the switching times and the threshold vales that are programmed on the memory card. As soon as the memory card is removed, the switching times of the time switch are re-activated. OBELISK COPY OBELISK -> LUNA OVERWRITE OK COPY LUNA RUN -> OBELISK OBELISK OVERWRITE OK CHECK OBELISK Resetting the twilight switch ¾Press the 4 bttons simltaneosly Yo can choose between KEEP PROGRAM and DELETE PROGRAM 21

22 6. Technical data Operating voltage: V~, +10 %/-15 % Freqency: Hz Brightness range: lx On/off switch delay: 0 59 min Power consmption: 1,7 W Switch otpt: phase-independent (zero-crossover switching) Contact: µ-contact, two way switch Switching capacity: 16 A/250 V~ cos ϕ = 1 Florescent lamp switching 10 AX capacity: Switching capacity min.: 10 ma/250 V AC 100 ma/12 V AC/DC Glow lamp load: 2600 W Halogen lamp load: 2600 W Florescent lamps KVG: ncorrected: series-corrected: parallel-corrected: Lead-lag circit (do): 2300 VA 2300 VA 800 VA (80μF) 2300 VA Florescent lamps (EVG Electronic series devices): 650 W Compact florescent tbes (EVG): 170 W LED lamps (< 2 W): 30 W LED lamps (2 W 8 W): 100 W LED-lamps (> 8 W): 120 W 22

23 Permissible ambient temperatre: Protection class: Protection rating: device Monted light sensor Installation light sensor 30 C C, 40 C C (sensor) II (light sensors III) if correctly monted IP 20 IP 55 IP 66 (frontside, when installed) IP 40 (backside) 7. Contact Theben AG Hohenbergstr Haigerloch GERMANY Tel Fax Hotline Tel hotline@theben.de Addresses, telephone nmbers etc. 23