LNA using BGB741L7 for UHF MHz Application

Size: px
Start display at page:

Download "LNA using BGB741L7 for UHF MHz Application"

Transcription

1 BGB741L7 LNA using BGB741L7 for UHF MHz Application Technical Report TR140 Revision: V1.0 Date: RF and protection devices

2 Edition Published by Infineon Technologies AG Munich, Germany 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office ( Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

3 TR140 Revision History: Previous Revision: No Revision Page Technical Report, TR140 3 / 11

4 1 Overview Device : BGB741L7 Application: PCB Marking: BGB7-Family V1.0 2 Summary of Measurement Results Table 1 Summary of Measurement Results Parameter Symbol Value Unit Note/Test Condition Frequency Range Freq 650 MHz DC Voltage Vcc 3 V Icc ma 6.6 ma Gain G 18.5 db Power@Port1: -30dBm Noise Figure NF 1.45 db Input Return Loss RLin 17.7 db Output Return Loss RLout 16.5 db Including SMA connectors and PCB losses of 0.1dB Reverse Isolation IRev 21.2 db Power@Port2:-30dBm Input P1dB IP1dB -5 dbm Output P1dB OP1dB 12.5 dbm Input IP3 IIP3 0.8 dbm Output IP3 OIP dbm Power@Input: f =1MHz Stability k >1 -- Stability measured from 100MHz to 10GHz Technical Report, TR140 4 / 11

5 3 Description This Technical report provides the actual results of the LNA using the BGB741L7 from Infineon Technologies for the UHF MHz applications. This Low Noise Amplifier brings a gain of 18dB minimum between the frequency Range of MHz with a noise figure of 1.45dB (including SMA connectors and PCB losses of 0.1dB). Furthermore, this device provides an unconditional stability from 100MHz up to 10GHz. The circuit is matched in input and output and presents an input return loss of 12.0dB and 10.5dB concerning the output. At the frequency of 650MHz, using two tones spaced of 1MHz, the output third-order intercept point reaches 19.3dBm. Besides we obtain an input -1dB compression point of -5dBm. Technical Report, TR140 5 / 11

6 4 Schematics Figure 4-1: Schematics of the BGB741L7 for the UHF MHz Application Table 2 : Bill of Materials C1 100 pf 0402 various Input Matching/DC Block C2 10 nf 0402 various RF Bypass C3 10 nf 0402 various RF Bypass C4 100 pf 0402 various Output Matching/DC Block L1 33 nh 0402 Murata LQG15A Input Matching/DC Feed L2 33 nh 0402 Murata LQG15A Output Matching/DC Feed Q1 TSLP7-1 Infineon SiGe MMIC LNA BGB741L7 with integrated ESD protection Technical Report, TR140 6 / 11

7 5 Measured Graphs MHz 18.5 db Transducer Power Gain 2400 MHz db MHz db 1000 MHz db Frequency (MHz) Figure 5-1: Power Gain of the BGB741L7 for the UHF MHz 0 Input Matching MHz -12 db 1000 MHz db MHz db MHz db Frequency (MHz) Figure 5-2: Input Matching of the BGB741L7 for the UHF MHz Technical Report, TR140 7 / 11

8 0 Output Matching MHz db 2400 MHz db MHz db 1000 MHz db Frequency (MHz) Figure 5-3: Output Matching of the BGB741L7 for the UHF MHz 50 Reverse Isolation MHz MHz MHz MHz Frequency (MHz) Figure 5-4: Reverse Isolation of the BGB741L7 for the UHF MHz Technical Report, TR140 8 / 11

9 5 Stability MHz Frequency (MHz) Figure 5-5: Stability of the BGB741L7 for the UHF MHz Figure 5-6: OIP3 of the BGB741L7 for UHF MHz Technical Report, TR140 9 / 11

10 6 Evaluation Board and layout Information Figure 6-1: PCB picture of the BGB741L7 for UGF MHz Application Figure 6-2: Layout Information Technical Report, TR / 11

11 Published by Infineon Technologies AG TR140

Application Note No. 157

Application Note No. 157 Application Note, Rev. 1.2, April 2008 Application Note No. 157 BFP450 SIEGET Transistor as an 869 MHz Power Amp in an Alarm Transmitter Monitor Application RF & Protection Devices Edition 2008-04-04 Published

More information

Application Note No. 146

Application Note No. 146 Application Note, Rev. 1.2, February 2008 Application Note No. 146 Low Cost 950-2150 MHz Direct Broadcast Satellite (DBS) Amplifier with the BFP420F RF Transistor draws 27 ma from 5 V supply RF & Protection

More information

Application Note No. 019

Application Note No. 019 Application Note, Rev. 2.0, Nov. 2006 Application Note No. 09 A Low-Noise-Amplifier with good IP3outperformance at.9 GHz using BFP405 Small Signal Discretes Edition 2006--08 Published by Infineon Technologies

More information

SKY LF: GHz Two-Stage, High Linearity and High Gain Low-Noise Amplifier

SKY LF: GHz Two-Stage, High Linearity and High Gain Low-Noise Amplifier DATA SHEET SKY67105-306LF: 0.6-1.1 GHz Two-Stage, High Linearity and High Gain Low-Noise Amplifier Applications GSM, CDMA, WCDMA, cellular infrastructure systems Ultra low-noise, high gain and high linearity

More information

SKY LF: GHz Ultra Low-Noise Amplifier

SKY LF: GHz Ultra Low-Noise Amplifier PRELIMINARY DATA SHEET SKY67151-396LF: 0.7-3.8 GHz Ultra Low-Noise Amplifier Applications LTE, GSM, WCDMA, TD-SCDMA infrastructure Ultra low-noise, high performance LNAs Cellular repeaters High temperature

More information

SKY LF: 1.5 to 3.8 GHz Two-Stage, High-Gain Low-Noise Amplifier

SKY LF: 1.5 to 3.8 GHz Two-Stage, High-Gain Low-Noise Amplifier DATA SHEET SKY67180-306LF: 1.5 to 3.8 GHz Two-Stage, High-Gain Low-Noise Amplifier Applications LTE, GSM, WCDMA, HSDPA macro-base and micro-base stations S and C band ultra-low-noise receivers Cellular

More information

SKY LF: GPS/GLONASS/Galileo/BDS Low-Noise Amplifier

SKY LF: GPS/GLONASS/Galileo/BDS Low-Noise Amplifier DATA SHEET SKY65624-682LF: GPS/GLONASS/Galileo/BDS Low-Noise Amplifier Applications GPS/GLONASS/Galileo/BDS radio receivers ENABLE Compass (Beidou) Smartphones Tablet/laptop PCs Enable Personal navigation

More information

Features. Parameter Min. Typ. Max. Units

Features. Parameter Min. Typ. Max. Units HMCBLPE v.. -. GHz Typical Applications The HMCBLPE is ideal for: Point-to-Point and Point-to-Multi-Point Radios Military Radar, EW & ELINT Satellite Communications Features Conversion Gain: db Image Rejection:

More information

Not recommended for new designs

Not recommended for new designs Device Features NF = 0.7 db @ 900MHz at RF connectors of Demo board Gain = 19.0 db @ 900 MHz OIP3 = 36.0 dbm @ 1900MHz, 2450MHz Output P1 db = 21.0 dbm @ 900MHz, 22.0 dbm @2450MHz 5V/48mA, MTTF > 100 Years,

More information

General purpose low noise wideband amplifier for frequencies between DC and 2.2 GHz

General purpose low noise wideband amplifier for frequencies between DC and 2.2 GHz Rev. 5 29 May 2015 Product data sheet 1. Product profile 1.1 General description Silicon Monolitic Microwave Integrated Circuit (MMIC) wideband amplifier with internal matching circuit in a 6-pin SOT363

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features NF = 0.91 db @ 900MHz at RF connectors of Demo board Gain = 22.0 db @ 900 MHz OIP3 = 36.0 dbm @ 1900MHz, 38.0 dbm @ 2450MHz Output P1 db = 20.5 dbm @ 900/1900/2140 MHz 5V/75mA, MTTF > 100

More information

SKY : 2.4 GHz, ac Switch/Low-Noise Amplifier Front-End

SKY : 2.4 GHz, ac Switch/Low-Noise Amplifier Front-End DATA SHEET SKY5203-11: 2.4 GHz, 02.11ac Switch/Low-Noise Amplifier Front-End Applications WiFi-enabled handsets, tablets, and mobile systems System-in-Package (SiP) modules for embedded systems 02.11n/ac

More information

SKY : Low-Noise Amplifier Front-End Module with GPS/GNSS/BDS Pre-Filter

SKY : Low-Noise Amplifier Front-End Module with GPS/GNSS/BDS Pre-Filter DATA SHEET SKY65723-81: Low-Noise Amplifier Front-End Module with GPS/GNSS/BDS Pre-Filter Applications GPS/GNSS/BDS radio receivers Global Navigation Satellite Systems (GLONASS) VEN VCC Fitness/activity

More information

ISSN: ISO 9001:2008 Certified International Journal of Engineering Science and Innovative Technology (IJESIT) Volume 2, Issue 4, July 2013

ISSN: ISO 9001:2008 Certified International Journal of Engineering Science and Innovative Technology (IJESIT) Volume 2, Issue 4, July 2013 Switch less Bidirectional RF Amplifier for 2.4 GHz Wireless Sensor Networks Hilmi Kayhan Yılmaz and Korkut Yeğin Department of Electrical and Electronics Eng. Yeditepe University, Istanbul, 34755 Turkey

More information

Features. Parameter Min. Typ. Max. Units

Features. Parameter Min. Typ. Max. Units Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radios Military Radar, EW & ELINT Satellite Communications Features Conversion Gain: db Image Rejection: dbc Input Third-Order

More information

SKY LF: 698 to 915 MHz Low-Noise Power Amplifier Driver

SKY LF: 698 to 915 MHz Low-Noise Power Amplifier Driver DATA SHEET SKY65094-360LF: 698 to 915 MHz Low-Noise Power Amplifier Driver Applications 2.5G, 3G, 4G wireless infrastructure transceivers ISM band transmitters WCS fixed wireless 3GPP LTE Features Wideband

More information

Features. Parameter Min. Typ. Max. Min. Typ. Max. Units

Features. Parameter Min. Typ. Max. Min. Typ. Max. Units v. DOWNCONVERTER, - GHz Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radios Military Radar, EW & ELINT Satellite Communications Maritime & Mobile Radios Features Conversion

More information

Revision: Rev

Revision: Rev Single-Band UMTS LNA Single-Band UMTS LNA BGA777N7 Supporting LTE Band-41 (2496-2690 MHz) Application Note AN370 Revision: Rev. 1.0 RF and Protection Devices Application Note AN370 Revision History: Previous

More information

Features. = +25 C, Vdd = +7V, Idd = 820 ma [1]

Features. = +25 C, Vdd = +7V, Idd = 820 ma [1] Typical Applications The is ideal for use as a power amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Space Functional Diagram Features Saturated

More information

General purpose low noise wideband amplifier for frequencies between DC and 2.2 GHz

General purpose low noise wideband amplifier for frequencies between DC and 2.2 GHz Rev. 1 20 October 2011 Product data sheet 1. Product profile 1.1 General description Silicon Monolithic Microwave Integrated Circuit (MMIC) wideband amplifier with internal matching circuit in a 6-pin

More information

SKY : MHz High Gain and Linearity Diversity Downconversion Mixer

SKY : MHz High Gain and Linearity Diversity Downconversion Mixer DATA SHEET SKY73022-11: 700 1000 MHz High Gain and Linearity Diversity Downconversion Mixer Applications 2G/3G base station transceivers: GSM/EDGE, CDMA, UMTS/WCDMA, iden Land mobile radio ISM band transceivers

More information

HMC581LP6 / 581LP6E MIXERS - SMT. HIGH IP3 RFIC DUAL DOWNCONVERTER, MHz. Typical Applications. Features. Functional Diagram

HMC581LP6 / 581LP6E MIXERS - SMT. HIGH IP3 RFIC DUAL DOWNCONVERTER, MHz. Typical Applications. Features. Functional Diagram Typical Applications The HMC1LP6 / HMC1LP6E is ideal for Wireless Infrastructure Applications: GSM, GPRS & EDGE CDMA & W-CDMA Cellular / 3G Infrastructure Functional Diagram Features +26 dbm Input IP3

More information

Features. Specification Min. Typ. Max. Input Return Loss MHz db. Output Return Loss MHz db. Reverse Isolation -22.

Features. Specification Min. Typ. Max. Input Return Loss MHz db. Output Return Loss MHz db. Reverse Isolation -22. Product Description RG512 is a low current and low noise Gain Block Amplifier in a low-cost surface mount package and provides 30dBm high OIP3 and 1.62dB Noise Figure at 1900MHz. It is fabricated on a

More information

Features. = +25 C, Vs = 5V, Vpd = 5V

Features. = +25 C, Vs = 5V, Vpd = 5V v1.117 HMC326MS8G / 326MS8GE AMPLIFIER, 3. - 4. GHz Typical Applications The HMC326MS8G / HMC326MS8GE is ideal for: Microwave Radios Broadband Radio Systems Wireless Local Loop Driver Amplifier Functional

More information

Application Note 5098

Application Note 5098 LO Buffer Applications using Avago Technologies ABA-3X563 Silicon Amplifiers Application Note 5098 Introduction An oscillator or a voltage-controlled oscillator (VCO) is usually buffered with an external

More information

SKY : MHz High Linearity, Single Up/Downconversion Mixer

SKY : MHz High Linearity, Single Up/Downconversion Mixer DATA SHEET SKY73063-11: 1700 2100 MHz High Linearity, Single Up/Downconversion Mixer Applications 2G/3G base station transceivers: GSM/EDGE, CDMA, UMTS/WCDMA Wi-Fi (802.11) WiMAX (802.16) 3GPP Long-Term

More information

SKY : Shielded Low-Noise Amplifier Front-End Module with GPS/GNSS/BDS Pre-Filter

SKY : Shielded Low-Noise Amplifier Front-End Module with GPS/GNSS/BDS Pre-Filter DATA SHEET SKY65720-11: Shielded Low-Noise Amplifier Front-End Module with GPS/GNSS/BDS Pre-Filter Applications GPS/GNSS/BDS radio receivers Global Navigation Satellite Systems (GLONASS) VEN Fitness/activity

More information

QPC6222SR GENERAL PURPOSE DPDT TRANSFER SWITCH. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information

QPC6222SR GENERAL PURPOSE DPDT TRANSFER SWITCH. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information Product Overview The is a dual-pole double-throw transfer switch designed for general purpose switching applications where RF port transfer (port swapping) control is needed. The low insertion loss along

More information

AH125 ½ W High Linearity InGaP HBT Amplifier

AH125 ½ W High Linearity InGaP HBT Amplifier Product Overview The is a high dynamic range driver amplifier in a low-cost surface mount package. The InGaP/GaAs HBT is able to achieve high performance across a broad range with +45 dbm OIP3 and +28

More information

DC-6.0 GHz 1.0W Packaged HFET

DC-6.0 GHz 1.0W Packaged HFET Features 46. dbm OIP3 @.8 GHz 1. db Gain @ 2 GHz.0 db Gain @ 6 GHz 30.0 dbm P1dB SOT-89 Package Functional Block Diagram General Description The X is a high linearity Hetrojunction Field Effect Transistor

More information

RF1119ATR7. SP4T (Single Pole Four Throw Switch) Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information

RF1119ATR7. SP4T (Single Pole Four Throw Switch) Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information Product Overview The is a single-pole four-throw (SP4T) switch designed for static Antenna/impedance tuning applications which requires very low insertion loss and high power handling capability with a

More information

10 GHz to 26 GHz, GaAs, MMIC, Double Balanced Mixer HMC260ALC3B

10 GHz to 26 GHz, GaAs, MMIC, Double Balanced Mixer HMC260ALC3B Data Sheet FEATURES Passive; no dc bias required Conversion loss 8 db typical for 1 GHz to 18 GHz 9 db typical for 18 GHz to 26 GHz LO to RF isolation: 4 db Input IP3: 19 dbm typical for 18 GHz to 26 GHz

More information

General purpose low noise wideband amplifier for frequencies between DC and 750 MHz

General purpose low noise wideband amplifier for frequencies between DC and 750 MHz Rev. 3 13 July 2015 Product data sheet 1. Product profile 1.1 General description Silicon Monolithic Microwave Integrated Circuit (MMIC) wideband amplifier with internal matching circuit in a 6-pin SOT363

More information

STEVAL-TDR021V1. Demonstration board using the PD84008L-E for 900 MHz 2-way radio. Features. Description

STEVAL-TDR021V1. Demonstration board using the PD84008L-E for 900 MHz 2-way radio. Features. Description Demonstration board using the PD84008L-E for 900 MHz 2-way radio Features Excellent thermal stability Frequency: 740-950 MHz Supply voltage: 7.2 V Output power: 5 W Power gain: 11 ± 1.0 db Efficiency:

More information

CMD197C GHz Distributed Driver Amplifier

CMD197C GHz Distributed Driver Amplifier Features Functional Block Diagram Wide bandwidth High linearity Single positive supply voltage On chip bias choke Pb-free RoHs compliant 4x4 mm SMT package Description The CMD197C4 is a wideband GaAs MMIC

More information

OBSOLETE HMC215LP4 / 215LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram

OBSOLETE HMC215LP4 / 215LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram v1.111 LO AMPLIFIER, 1.7-4. GHz Typical Applications The HMC215LP4 / HMC215LP4E is ideal for Wireless Infrastructure Applications: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM &

More information

GHz High Dynamic Range Amplifier

GHz High Dynamic Range Amplifier Features.2 to 6. GHz Range +41 dbm Output IP3 1.7 db db +23 dbm P1dB LGA Package Single Power Supply Single Input Matching The is a high dynamic range amplifier designed for applications operating within

More information

Data Sheet. ALM MHz 870 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature. Description.

Data Sheet. ALM MHz 870 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature. Description. ALM-11036 776 MHz 870 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature Data Sheet Description Avago Technologies ALM-11036 is an easy-to-use GaAs MMIC Tower Mount Amplifier

More information

Data Sheet. ALM MHz 915 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature. Description.

Data Sheet. ALM MHz 915 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature. Description. ALM-11136 870 MHz 915 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature Data Sheet Description Avago Technologies ALM-11136 is an easy-to-use GaAs MMIC Tower Mount Amplifier

More information

STEVAL-TDR020V1. Portable UHF 2-way radio demonstration board based on the PD84006L-E. Features. Description

STEVAL-TDR020V1. Portable UHF 2-way radio demonstration board based on the PD84006L-E. Features. Description Portable UHF 2-way radio demonstration board based on the PD84006L-E Features Excellent thermal stability Frequency: 740-950 MHz Supply voltage: 7.2 V Output power: 4 W Power gain: 12.3 ± 0.3 db Efficiency:

More information

Monolithic Amplifier GVA-60+ Flat Gain, High IP to 5 GHz. The Big Deal

Monolithic Amplifier GVA-60+ Flat Gain, High IP to 5 GHz. The Big Deal Flat Gain, High IP3 Monolithic Amplifier 50Ω 0.01 to 5 GHz The Big Deal Excellent Gain Flatness and Return Loss over 50-1000 MHz High IP3 vs. DC Power consumption Broadband High Dynamic Range without external

More information

General purpose low noise wideband amplifier for frequencies between DC and 2.2 GHz

General purpose low noise wideband amplifier for frequencies between DC and 2.2 GHz Rev. 5 3 October 2016 Product data sheet 1. Product profile 1.1 General description Silicon Monolithic Microwave Integrated Circuit (MMIC) wideband amplifier with internal matching circuit in a 6-pin SOT363

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features Single Fixed 3V supply No Dropping Resistor Required No matching circuit needed Lead-free/Green/RoHS compliant SOT-363 package Application: Driver Amplifier, Cellular, PCS, GSM, UMTS, WCDMA,

More information

General purpose low noise wideband amplifier for frequencies between DC and 750 MHz

General purpose low noise wideband amplifier for frequencies between DC and 750 MHz Rev. 3 3 October 2016 Product data sheet 1. Product profile 1.1 General description Silicon Monolithic Microwave Integrated Circuit (MMIC) wideband amplifier with internal matching circuit in a 6-pin SOT363

More information

SKY : 5 GHz, ac/n Low-Noise Amplifier

SKY : 5 GHz, ac/n Low-Noise Amplifier DATA SHEET SKY698-: GHz, 82.ac/n Low-Noise Amplifier Applications IEEE 82.ac/n WLANs GHz ISM radios SmartPhones Notebooks, netbooks, tablets Access points, routers, gateways Wireless video systems Features

More information

OBSOLETE HMC423MS8 / 423MS8E MIXERS - DBL-BAL - SMT. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications.

OBSOLETE HMC423MS8 / 423MS8E MIXERS - DBL-BAL - SMT. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Typical Applications The HMC423MS8 / HMC423MS8E is ideal for: Base Stations Portable Wireless CATV/DBS ISM Functional Diagram Electrical Specifications, T A = +25 C Features Integrated LO Amplifi er w/

More information

OBSOLETE HMC422MS8 / 422MS8E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram

OBSOLETE HMC422MS8 / 422MS8E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram v4.712 Typical Applications The HMC422MS8 / HMC422MS8E is ideal for: MMDS & ISM Wireless Local Loop WirelessLAN Cellular Infrastructure Functional Diagram Electrical Specifications, T A = +2 C Features

More information

Features. = +25 C, IF = 100 MHz, LO = 0 dbm, Vcc1, 2, 3, = +5V, G_Bias = +3.5V*

Features. = +25 C, IF = 100 MHz, LO = 0 dbm, Vcc1, 2, 3, = +5V, G_Bias = +3.5V* v3.1 LO AMPLIFIER, 7 - MHz Typical Applications The HMC684LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +32

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features 3 ~ 3.2V supply No Dropping Resistor Required No matching circuit needed Lead-free/Green/RoHS compliant SOT-363 package Application: Driver Amplifier, Cellular, PCS, GSM, UMTS, WCDMA, Wireless

More information

Mechanical specification. October 2010 Doc ID Rev 1 1/10

Mechanical specification. October 2010 Doc ID Rev 1 1/10 Portable UHF 2-way radio demonstration board based on the PD84001 Preliminary data Features Excellent thermal stability Frequency: 380-520 MHz Supply voltage: 7.2 V Output power: 1 W Power gain: 15.5 ±

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications The is ideal

More information

HIGH-LINEARITY TRIPLE-BALANCED MIXERS T3-0838

HIGH-LINEARITY TRIPLE-BALANCED MIXERS T3-0838 HIGH-LINEARITY TRIPLE-BALANCED MIXERS T3-838 The T3-838 is a high performance mixer featuring LO/RF from 8 to 38 GHz and IF from MHz to GHz. As with all T3 mixers, this mixer offers unparalleled nonlinear

More information

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V *

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V * Typical Applications The is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +38 dbm 8 db Conversion Loss @ 0 dbm LO Optimized

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 43.0 dbm @ 70 MHz Gain = 17.5 db @ 70 MHz Output P1 db = 20.5 dbm @ 70 MHz 50 Ω Cascadable Patented temperature compensation Patented over voltage protection Lead-free/RoHS-compliant

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features Single Fixed 3V supply No Dropping Resistor Required No matching circuit needed Lead-free/Green/RoHS compliant SOT-363 package Application: Driver Amplifier, Cellular, PCS, GSM, UMTS, WCDMA,

More information

Revision: Rev

Revision: Rev Single-Band LTE LNA Single Band LTE LNA BGA7L1N6 Supporting Band-5 (869-894 MHz) Using 0201 Components Application Note AN351 Revision: Rev. 1.0 RF and Protection Devices Application Note AN351 Revision

More information

Revision: Rev

Revision: Rev Single-Band LTE LNA Single Band LTE LNA BGA7M1N6 Supporting Band-1 (2110-2170 MHz) Using 0201 Components Application Note AN350 Revision: Rev. 1.0 RF and Protection Devices Application Note AN350 Revision

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 32.0 dbm @ 1900 MHz Gain = 22.2 db @ 1900 MHz Output P1 db = 19.0 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Patented Over Voltage Protection Circuit Lead-free/RoHS-compliant

More information

QPL6216TR7 PRELIMINARY. Product Description. Feature Overview. Functional Block Diagram. Applications. Ordering Information. High-Linearity SDARS LNA

QPL6216TR7 PRELIMINARY. Product Description. Feature Overview. Functional Block Diagram. Applications. Ordering Information. High-Linearity SDARS LNA Product Description The is a high linearity, ultra-low noise gain block amplifier in a small 2x2 mm surface-mount package. At 2332 MHz, the amplifier typically provides +36 dbm OIP3. The amplifier does

More information

Typical Performance 1. 2 OIP3 _ measured on two tones with a output power 8 dbm/ tone, F2 F1 = 1 MHz. +5V. RFout. Absolute Maximum Ratings

Typical Performance 1. 2 OIP3 _ measured on two tones with a output power 8 dbm/ tone, F2 F1 = 1 MHz. +5V. RFout. Absolute Maximum Ratings Device Features OIP3 = 41.5 dbm @ 500 MHz Gain = 27 db @ 140 MHz Output P1 db = 21 dbm @ 140 MHz NF = 2.7 @ 70MHz at Demo Board Product Description BeRex s BIG8 is a high performance InGaP/ GaAs HBT MMIC

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 28 dbm @ 1900 MHz Gain = 16 db @ 1900 MHz Output P1 db = 15.5 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 44.0 dbm @ 70 MHz Gain = 20.3 db @ 70 MHz Output P1 db = 23.5 dbm @ 70 MHz 50 Ω Cascadable Patented over voltage protection Lead-free/RoHS-compliant SOT-89 SMT package Product Description

More information

Revision: Rev

Revision: Rev Silicon Germanium Low Noise Amplifier for LTE Silicon Germanium LNA using BGA7H1N6 for LTE ISM Band (2400-2500 MHz) Application Note AN365 Revision: Rev. 1.0 RF and Protection Devices Application Note

More information

QPB9328SR. Dual-Channel Switch LNA Module. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information

QPB9328SR. Dual-Channel Switch LNA Module. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information 9 Product Overview The is a highly integrated front-end module targeted for TDD base stations. The switch module integrates a two-stage and a high-power switch in a dual channel configuration. Power down

More information

GaAs MMIC Double Balanced Mixer. Description Package Green Status

GaAs MMIC Double Balanced Mixer. Description Package Green Status GaAs MMIC Double Balanced Mixer MM132HSM 1. Device Overview 1.1 General Description The MM132HSM is a GaAs MMIC double balanced mixer that is optimized for high frequency applications. MM1-832HSM is a

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features Single Fixed 3V supply No Dropping Resistor Required No matching circuit needed Lead-free/Green/RoHS compliant SOT-363 package Application: Driver Amplifier, Cellular, PCS, GSM, UMTS, WCDMA,

More information

GaAs MMIC High Dynamic Range Mixer

GaAs MMIC High Dynamic Range Mixer Page 1 MT3-113HCQG The MT3-113HCQG is a triple balanced passive diode GaAs MMIC mixer offering high dynamic range, low conversion loss, and excellent repeatability. As with all T3 mixers, this mixer offers

More information

AN BFU910F FE for Ku band Universal Single LNB applications. Document information. Keywords Abstract

AN BFU910F FE for Ku band Universal Single LNB applications. Document information. Keywords Abstract BFU910F FE for Ku band Universal Single LNB applications Rev. 1 8 December 2015 Application note Document information Info Keywords Abstract Content BFU910F, Frontend, Ku band, LNA, LNB This Application

More information

RF2360 LINEAR GENERAL PURPOSE AMPLIFIER

RF2360 LINEAR GENERAL PURPOSE AMPLIFIER Linear General Purpose Amplifier RF2360 LINEAR GENERAL PURPOSE AMPLIFIER RoHS Compliant & Pb-Free Product Package Style: Standard Batwing Features 5MHz to 1500MHz Operation Internally Matched Input and

More information

HMC485MS8G / 485MS8GE. Features OBSOLETE. = +25 C, LO = 0 dbm, IF = 200 MHz*, Vdd= 5V

HMC485MS8G / 485MS8GE. Features OBSOLETE. = +25 C, LO = 0 dbm, IF = 200 MHz*, Vdd= 5V Typical Applications High Dynamic Range Infrastructure: GSM, GPRS & EDGE CDMA & W-CDMA Cable Modem Termination Systems Functional Diagram Features +34 dbm Input IP3 Conversion Loss: db Low LO Drive: -2

More information

Features. = +25 C, As a Function of LO Drive & Vdd. IF = 1 GHz LO = -4 dbm & Vdd = +4V

Features. = +25 C, As a Function of LO Drive & Vdd. IF = 1 GHz LO = -4 dbm & Vdd = +4V v4.414 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Integrated LO Amplifier: -4

More information

GaAs MMIC High Dynamic Range Mixer

GaAs MMIC High Dynamic Range Mixer Page 1 The is a triple balanced passive diode mixer offering high dynamic range, low conversion loss, and excellent repeatability. As with all T3 mixers, this mixer offers unparalleled nonlinear performance

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v4.414 Typical Applications Features

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Ultra Low Noise Amplifier ~ RLNAMG Electrical Specifications, TA = +⁰C, Vcc = +V Features Gain: db Typical Noise Figure:.dB Typical PdB Output Power: +dbm Typical Supply Voltage: +V /ma Ohm Matched Typical

More information

SKY : Low-Power Bluetooth Low Energy Front-End Module for Range Extension Applications

SKY : Low-Power Bluetooth Low Energy Front-End Module for Range Extension Applications DATA SHEET SKY66110-11: Low-Power Bluetooth Low Energy Front-End Module for Range Extension Applications Applications Range extender CTX CRX VCC Wearable technology Beacons Sensors Home automation TR ANT

More information

CMD179C GHz Fundamental Mixer. Features. Functional Block Diagram. Description

CMD179C GHz Fundamental Mixer. Features. Functional Block Diagram. Description Features Functional Block Diagram Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Pb-free RoHs compliant 3x3 mm SMT package Description The CMD179C3 is a general purpose

More information

6GHz Medium Power SPDT Switch

6GHz Medium Power SPDT Switch 6GHz Medium Power SPDT Switch RF SWITCH CG2185X2 DESCRIPTION The CG2185X2 is a phemt GaAs FET SPDT (Single Pole Double Throw) Switch. This device can operate from 2.0GHz to 6.0GHz, with low insertion loss

More information

CMD180C GHz Fundamental Mixer. Features. Functional Block Diagram. Description

CMD180C GHz Fundamental Mixer. Features. Functional Block Diagram. Description CMD18C3 2-32 GHz Fundamental Mixer Features Functional Block Diagram Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Pb-free RoHs compliant 3x3 mm SMT package Description

More information

6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer HMC773A

6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer HMC773A FEATURES Conversion loss: 9 db typical Local oscillator (LO) to radio frequency (RF) isolation: 37 db typical LO to intermediate frequency (IF) isolation: 37 db typical RF to IF isolation: db typical Input

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 39.0 dbm @ 70 MHz Gain = 24 db @ 70 MHz Output P1 db = 20.5 dbm @ 70 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product Description

More information

2 OIP3 _ measured on two tones with a output power 8 dbm/ tone, F2 F1 = 1 MHz. Absolute Maximum Ratings

2 OIP3 _ measured on two tones with a output power 8 dbm/ tone, F2 F1 = 1 MHz. Absolute Maximum Ratings Device Features OIP3 = 41 dbm @ 14 MHz Gain = 2. db @ 14 MHz Output P1 db = 2. dbm @ 14 MHz NF = 2.7 @ 14MHz at Demo Board Ω Cascadable Lead-free/RoHS-compliant SOT-89 SMT package Typical Performance 1

More information

OBSOLETE HMC908LC5 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT. GaAs MMIC I/Q DOWNCONVERTER 9-12 GHz. Typical Applications. Functional Diagram

OBSOLETE HMC908LC5 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT. GaAs MMIC I/Q DOWNCONVERTER 9-12 GHz. Typical Applications. Functional Diagram v3.1 HMC98LC Typical Applications The HMC98LC is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Maritime & Mobile Radio Functional Diagram

More information

L, S-band Medium Power SPDT Switch

L, S-band Medium Power SPDT Switch RF SWITCH CG2179M2 L, S-band Medium Power SPDT Switch DESCRIPTION The CG2179M2 is a phemt GaAs SPDT (Single Pole Double Throw) switch. This device can operate from 0.05 GHz to 3.0GHz, having low insertion

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 35 dbm @ 1900 MHz Gain = 16 db @ 1900 MHz Output P1 db = 19.5 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product

More information

QPA2626D GHz Low Noise Amplifier

QPA2626D GHz Low Noise Amplifier Product Overview Qorvo s QPAD is a high-performance, low noise MMIC amplifier fabricated on Qorvo s production 9nm phemt process (QPHT9). Covering 17 23 GHz, the QPAD provides 25 db small signal gain and

More information

Parameter Min. Typ. Max. Min. Typ. Max. Units

Parameter Min. Typ. Max. Min. Typ. Max. Units Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features db Conversion Gain Image Rejection:

More information

Typical Performance 1

Typical Performance 1 Device Features Internally matched to 50 ohms Operated at 3.0V and 5.0V 37.5 dbm Output IP3 at 0dBm/tone at 700MHz 22.5dB Gain at 700MHz 21.1dBm P1dB at 700 MHz 0.40 db NF at 700MHz on evaluation board

More information

L, S-band Medium Power SPDT Switch

L, S-band Medium Power SPDT Switch RF SWITCH CG2214M6 L, S-band Medium Power SPDT Switch DESCRIPTION The CG2214M6 is a phemt GaAs SPDT (Single Pole Double Throw) switch. This device can operate from 0.05 to 3.0 GHz, having low insertion

More information

Typical Performance 1. 2 OIP3 _ measured with two tones at an output of 7 dbm per tone separated by 1 MHz. Absolute Maximum Ratings

Typical Performance 1. 2 OIP3 _ measured with two tones at an output of 7 dbm per tone separated by 1 MHz. Absolute Maximum Ratings Device Features OIP3 = 32 dbm @ 1900 MHz Gain = 21.5 db @ 1900 MHz Output P1 db = 19 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product

More information

Typical Performance 1

Typical Performance 1 Device Features Internally matched to 50 ohms Operated at 3.0V and 5.0V 36.2 dbm Output IP3 at 0dBm/tone at 1850 MHz 18.5dB Gain at 1850MHz 19.6dBm P1dB at 1850MHz 0.65 db NF at 1850MHz on evaluation board

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 30 dbm @ 1900 MHz Gain = 16.4 db @ 1900 MHz Output P1 db = 17 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 35 dbm @ 1900 MHz Gain = 13.3 db @ 1900 MHz Output P1 db = 18.5 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 32.5 dbm @ 1900 MHz Gain = 20.9 db @ 1900 MHz Output P1 db = 18.8 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Patented Over Voltage Protection Circuit Lead-free/RoHS-compliant

More information

TGC2610-SM 10 GHz 15.4 GHz Downconverter

TGC2610-SM 10 GHz 15.4 GHz Downconverter Applications VSAT Point-to-Point Radio Test Equipment & Sensors -pin 5x5 mm QFN package Product Features Functional Block Diagram RF Frequency Range: 15. GHz IF Frequency: DC GHz LO Frequency: 19 GHz LO

More information

MRFIC1804. The MRFIC Line SEMICONDUCTOR TECHNICAL DATA

MRFIC1804. The MRFIC Line SEMICONDUCTOR TECHNICAL DATA SEMICONDUCTOR TECHNICAL DATA Order this document by /D The MRFIC Line Designed primarily for use in DECT, Japan Personal Handy Phone (JPHP), and other wireless Personal Communication Systems (PCS) applications.

More information

The Hmc869LC5 is ideal for: Point-to-Point and Point-to-Multi-Point Radio. Parameter Min. Typ. Max. Units

The Hmc869LC5 is ideal for: Point-to-Point and Point-to-Multi-Point Radio. Parameter Min. Typ. Max. Units Typical Applications The Hmc86LC is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features Electrical Specifications, T

More information

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +10 dbm. IF = 70 MHz

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +10 dbm. IF = 70 MHz v1.112 HMC27AS8 / 27AS8E BALANCED MIXER,.7-2. GHz Typical Applications The HMC27AS8 / HMC27AS8E is ideal for: Base Stations Cable Modems Portable Wireless Functional Diagram Features Conversion Loss: 9

More information

BGA2022, RX mixer 880, 1950 and 2450 MHz

BGA2022, RX mixer 880, 1950 and 2450 MHz Philips Semiconductors BGA2022, RX mixer 880, 1950 and 2450 MHz Application Note AN00059 APPLICATION NOTE BGA2022, RX mixer 880, 1950 and 2450 MHz AN00059 Author(s): Hans ten Cate Philips Semiconductors

More information

CMD178C GHz Fundamental Mixer. Features. Functional Block Diagram. Description

CMD178C GHz Fundamental Mixer. Features. Functional Block Diagram. Description Features Functional Block Diagram Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Pb-free RoHs compliant 3x3 mm SMT package Description The CMD178C3 is a general purpose

More information

Preliminary Datasheet

Preliminary Datasheet Device Features Operated at 3.0V and 5.0V 35.5 dbm Output IP3 at 0dBm/tone at 3500MHz 16.4 db Gain at 3500 MHz 20.1 dbm P1dB at 3500MHz 0.67 db NF at 3500MHz Fast shut down to support TDD systems Lead-free/Green/RoHS

More information