FOREWORD January

Transcription

1 FOREWORD January

2 PHILIPS SELECON PL1 LED LUMINAIRE SERVICE MANUAL Forward The material in this manual is for information purposes only and is subject to change without notice. Philips Selecon assumes no responsibility for any errors or omissions which may appear in this manual. For comments and suggestions regarding corrections and/or updates to this manual, please visit the Philips Selecon web site at or contact your nearest Philips Selecon office. El contenido de este manual es solamente para información y está sujeto a cambios sin previo aviso. Philips Selecon no asume responsabilidad por errores o omisiones que puedan aparecer. Cualquier comentario, sugerencia o corrección con respecto a este manual, favor de dirijirlo a la oficina de Philips Selecon más cercana. Der Inhalt dieses Handbuches ist nur für Informationszwecke gedacht, Aenderungen sind vorbehalten. Philips Selecon uebernimmt keine Verantwortung für Fehler oder Irrtuemer, die in diesem Handbuch auftreten. Für Bemerkungen und Verbesserungsvorschlaege oder Vorschlaege in Bezug auf Korrekturen und/oder Aktualisierungen in diesem Handbuch, moechten wir Sie bitten, Kontakt mit der naechsten Philips Selecon-Niederlassung aufzunehmen. Le matériel décrit dans ce manuel est pour information seulement et est sujet à changements sans préavis. La compagnie Philips Selecon n'assume aucune responsibilité sur toute erreur ou ommission inscrite dans ce manuel. Pour tous commentaires ou suggestions concernant des corrections et/ou les mises à jour de ce manuel, veuillez s'il vous plait contacter le bureau de Philips Selecon le plus proche. Information contained in this document may not be duplicated in full or in part by any person without prior written approval of Philips Selecon. Its sole purpose is to provide the user with conceptual information on the equipment mentioned. The use of this document for all other purposes is specifically prohibited. Document Number: Version as of: 14 January 2011 Philips Selecon PL1 LED Luminaire Service Manual 2010 Philips Group. All rights reserved. i 14 January

3 FORWARD Philips Selecon Offices Philips Selecon - Dallas Petal Street Dallas, TX Tel: Fax: Philips Selecon - New York 267 5th Ave, 4th Floor New York, NY Tel: Fax: Philips Selecon - Auckland Kawana Street Northcote, Auckland 0627 New Zealand Tel: Fax: Philips Selecon - Europe Marssteden 152 Enschede 7547 TD The Netherlands Tel: Fax: Philips Selecon - Asia Limited Room 6-10, 20/F Delta House 3 On Yiu Street Shatin, N.T. Hong Kong Tel: Fax: Website: Confidential Property Disclosure This technical manual is confidential property of Philips Selecon All information contained herein is the sole and exclusive property of Philips Selecon and may not be used, disclosed, or reproduced in any manner without the prior written consent of Philips Selecon The information furnished in this manual is for informational use only and is subject to change without notice. Philips Selecon assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. How To Obtain Warranty Service A copy of the Philips Selecon Limited Warranty is available on the Philips Selecon web site at or by contacting customer service at To obtain warranty service, please contact customer service at or entertainment.service@philips.com and request a Return Goods Authorization (RGA) for warranty service. You need to provide the model and serial number of the item being returned, a description of the problem or failure and the name of the registered user or organization. If available, you should have your sales invoice to establish the date of sale as the beginning of the warranty period. Once you obtain the RGA, pack the product in its original packing material along with a copy of your invoice (if available) and write the RGA number legibly on or near the shipping address label. Return the unit, freight prepaid to: January 2011 ii

4 PHILIPS SELECON PL1 LED LUMINAIRE SERVICE MANUAL Philips Selecon Petal Street Dallas, Texas Attention: Warranty Service (RGA# ) As stated in the warranty, it is required that the shipment be insured and FOB our service center. Compliance Notice FCC This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with Philips Selecon system, service, and safety guidelines, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his/her own expense. Declaration of Conformity We declare, under our sole responsibility, that this product complies with the relevant clauses of the following standards and harmonized documents: Safety (by Low Voltage Directive 2006/95/EC): IEC : 2008 General Requirements for Luminaires - Part 1 IEC : A1: A2: 1990 Particular Requirements: Section Seventeen - Luminaires for Stage Lighting, and Film Studios (outdoor and indoor) EMC (by Council Directive 2004/108/EC): IEC : 2005; EN : 2007 Electromagnetic Compatibility (EMC) - Part 6-1, Generic Standards - Immunity Standard for residential, commercial, and light-industrial environments IEC : 2006; EN : 2007 Electromagnetic Compatibility (EMC) - Part 6-3, Generic Standards - Emission Standard for residential, commercial, and light-industrial environments We certify that the product conforms to the protection requirements of Low Voltage Directive 2006/95/EC and Council Directive 2004/108/EC iii 14 January

5 FORWARD Safety Notice It is extremely important to read ALL safety information and instructions provided in this manual and any accompanying documentation before installing and operating the products described herein. Heed all cautions and warnings during installation and use of this product. Safety symbols used throughout this manual are as follows: CAUTION advising of potential damage to product. WARNING advising of potential injury or death to persons. GENERAL INFORMATION PERTAINING TO PROTECTION AGAINST FIRE AND ELECTRICAL SHOCK. WARNING: INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST FIRE 1. Protect product from any harmful environments, damage, etc. 2. Connect to power sources and voltages as described in the installation manual. WARNING: INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST ELECTRICAL SHOCK 1. PL1 LED Luminaires are designed for dry locations only. Exposure to rain or moisture may damage the unit. 2. Disconnect power before servicing any unit. 3. Servicing to be performed by qualified personnel only. WARNING: RF INTERFERENCE 1. This is a Class A product. In a domestic environment this product may cause radio interference, in which case, the user may be required to take adequate measures January 2011 iv

6 TABLE OF CONTENTS Table of Contents Forward Table of Contents Introduction About This Manual... 1 Additional Documentation... 1 Customer Service... 2 Technical Bulletins and Notices... 2 Product Overview and Descriptions Features & Specifications Standard Features... 4 Standard Specifications... 5 Major Components PL1 LED Luminaire... 6 Menu Display... 7 Luminaire Head Components... 8 Luminaire Enclosure Components... 9 Principles of Operation PL1 Functional Block Diagram Special Care and Handling Cleaning and Care Instructions General Care and Equipment Handling Locations/Use Solid State Electronics Electrostatic Discharge (ESD) Printed Circuit Boards (PCBs) Required Tools for PL1 LED Luminaire Service Illustrated Parts Breakdown Drawing Tree PL1 LED Luminaire Top Assembly PL1 LED Luminaire Head PL1 Head Assembly PL1 Optical Assembly PL1 Lens Tube Assembly Enclosure PL1 Power Enclosure Assembly PL1 Infrared PCB Assembly Technical Bulletins and Notices PL1 LED Luminaire Technical Bulletin List PL1 LED Luminaire Technical Notice List January 2011 v

7 INTRODUCTION Introduction About This Manual This manual provides descriptions, repair procedures, and illustrated parts breakdowns for all configurations of the PL1 LED Luminaire. The manual is intended for use by Philips Selecon personnel and by Authorized Philips Selecon Service Centers. WARNING: It is important to read ALL accompanying safety and installation instructions to avoid damage to the product and potential injury to yourself or others. This manual covers the following models: MODEL(S) PL1 LED Luminaire PART NUMBER(S) All Versions Note: Performing maintenance procedures contained in this manual may void the product warranty. Refer to the Philips Selecon Limited Warranty on the Philips Selecon web site for more information. Additional Documentation A support web page for Philips Selecon luminaires is available on the Philips Selecon web site at (follow the Support link). A users and installation manual is available for installation and operation of the PL1 LED Luminaire. This manual is available in both printed and electronic (PDF) formats. PL1 LED Luminaire Installation & Users Manual ( ) January

8 PHILIPS SELECON PL1 LED LUMINAIRE SERVICE MANUAL Customer Service Our Goal At Philips Selecon, we are committed to providing you the highest quality in customer service. Our comprehensive resources are available to help your business succeed and ensure you get the full benefit of being a Philips Selecon customer. Whether your needs are telephone/troubleshooting assistance, product training or technical service, our full-time staff of experienced professionals are on-hand to provide support. How to Reach Us For assistance in your area, call the dealer from which your product(s) were purchased or a local Philips Selecon Authorized Service Center. or A Philips Selecon regional office (See Philips Selecon Offices on page ii.) or Contact the Philips Selecon Customer Service Department, 9am - 6pm CST (US) Monday through Friday, at the following: phone: fax: entertainment.service@philips.com Additional Resources For additional resources and documentation, please visit our website at: and follow the Support link. Technical Bulletins and Notices Technical bulletins concerning the latest changes to PL1 LED Luminaires are issued from the Dallas, Texas USA office. They are documentation supplements that contain procedures for equipment upgrades, retrofits, and repairs not found in the existing manuals. Operator technical bulletins are also issued to document changes in control software. Technical bulletins are integrated into the appropriate equipment manuals as those manuals are revised. Bulletins are categorized by assembly or subassembly, and identified by a number such as PL1-001 (PL1 LED Luminaire Technical Bulletin number 1). Technical notices are also issued from the Dallas, Texas USA office. They are nonprocedural documents that contain information regarding product support issues, current equipment problems, software bugs, and documentation corrections. All technical notices begin with the prefix TN and are numbered sequentially, such as TN- 138 (Tech Notice number 138). All released technical notices or bulletins are listed in Technical Bulletins and Notices on page January

9 Product Overview and Descriptions This section provides an overview of luminaire features, components and operations. Features & Specifications Major Components Principles of Operation Special Care and Handling January

10 PHILIPS SELECON PL1 LED LUMINAIRE SERVICE MANUAL Features & Specifications Standard Features The PL1 LED luminaire features a bright RGBW LED light source, full color mixing, adjustable beam angles, and on-board LCD menu system. The PL1 LED luminaire contains the following standard features: 120 watt RGBW LED light source. Full range color mixing. Standard White Color Temperature presets - Warm, Cool, or Day (daylight). On-board storage of multiple, user-programmable presets. Control through on-board controls or DMX512 control systems. Multiple mounting options - track, ceiling, or truss. Adjustable 12.5 to 50 degree beam angles January

11 PRODUCT OVERVIEW AND DESCRIPTIONS Standard Specifications Source: 120 Watt, RGBW LED Chipset (contains high density red, green, blue, and white LED emitters). Manufacturer Rated Life: In excess of 10,000 hours (at full RGBW). L10-70%. Beam Spread: 13 to 50+ degrees Light Output: > 2,000 lumens Color Temperature: K (user adjustable) Input Voltage: 120V to 240V (+/- 10%, auto-ranging) Current: 1.91 Amps (max.) Frequency: 50/60Hz Ambient Temperature:0 to 40 degrees C (32 to 104 degrees F) Humidity: 5%-95% Non condensing Cooling: Forced-Air Weight: 8.0 lbs (3.6 kg) - Luminaire only (no mount, AC input cable or accessories) Compliance: ETL / cetl Listed (North America models) and CE Marked (International models) Note: Common model specifications shown. For specific model specifications, features, and accessories, refer to the product specification sheet or visit the Philips Selecon web site at for more details January

12 PHILIPS SELECON PL1 LED LUMINAIRE SERVICE MANUAL Major Components PL1 LED Luminaire The following illustration shows the major luminaire components and controls ) LCD Display Menu (see Menu Display on page 7 for more information) 2) Tilt Axis Point (see detail) 3) Lens Barrel 4) Locking Focus / Zoom Knob 5) Pan Axis Point 6) DMX512 In/Out Connections - both ports are In / Out (see detail) 7) Diffuser / Accessory Holder 8) IR Programming window 9) Allen Wrench Tool (part number ARLAKTOOL, included with luminaire) contains 2.5mm, 3mm, 4mm & 5mm Allen hex keys for locking pan or tilt. 7 9 DMX512 In / Out Connections Tilt Axis Label Port for future use 150 Note: Some components not shown for clarity January

13 PRODUCT OVERVIEW AND DESCRIPTIONS Menu Display The Menu System Display is used to access the menu system, which is a programmable set of commands used to address, operate, and test the luminaire. The menu system is controlled by a series of buttons with options / settings displayed on a backlit LCD Display. The menu system is comprised of the following: 1 2 ESC PRESET INTENSITY MENU 3 OK 1) LCD Display (Menu System) 2) Preset / Intensity / Menu Access Buttons 3) Function (Menu System) Select Push Buttons Note: Refer to the PL1 LED Luminaire User s Manual for more detailed instructions regarding display operation January

14 PHILIPS SELECON PL1 LED LUMINAIRE SERVICE MANUAL Luminaire Head Components The following illustration shows the major sub-assemblies which are located in the luminaire head assembly. Note, luminaire enclosure not shown for clarity. Upper Luminaire Head Cover Lens Tube (contains lenses and accessory holder) LED / Luminaire Cooling Assembly LED / Optical Assembly Focus Knob Assembly LED Driver PCB Assembly Lower Luminaire Head Cover Tilt Axis Point 8 14 January

15 PRODUCT OVERVIEW AND DESCRIPTIONS Luminaire Enclosure Components The following illustration shows the major sub-assemblies which are located in the luminaire enclosure assembly. Note, luminaire head not shown for clarity. Menu / Display Overlay Menu / Display PCB Assembly Pan Axis Point Power Supply Assembly Enclosure Enclosure Cover January

16 PHILIPS SELECON PL1 LED LUMINAIRE SERVICE MANUAL Principles of Operation PL1 Functional Block Diagram AC Input Low Voltage Supply LCD Display PRESET INTENSITY MENU (ESC) LED Driver Board 1 Fan OK -ve DMX512 Input PL1 Display and Control Board B R W G Infrared PCB IR Input (Programming Input) Signal Legend Data Power Note: The PL1 LED Luminaire utilizes a + ve (positive) to ground January

17 PRODUCT OVERVIEW AND DESCRIPTIONS Special Care and Handling WARNING: All cleaning should be performed with power completely removed from the luminaire. Never remove protective covers when luminaire is powered. Wear appropriate protective eye wear and gloves when cleaning the fixture. All service and maintenance, other than described herein, should be performed by a qualified technician or Authorized Service Center. Cleaning and Care Instructions Being a solid-state fixture, and unlike most fixtures, the PL1 LED Luminaire requires very little routine maintenance by the user. This section covers portions of the luminaire that can be removed for cleaning. The PL1 Luminaire requires special care when it comes to cleaning front lens assembly. Additional care needs to be taken with the plastic components because they are much easier to scratch or damage than glass. The following is a list of cleaning materials required to care for your PL1 LED Luminaire: Lint free lens tissue Lint or powder free gloves Reagent grade isopropyl alcohol* A mild soap solution. Note: *Reagent grade isopropyl alcohol is good to use on the PL1 LED Luminaire plastic optics with anti-reflection coatings. If the lens is still dirty after using isopropyl alcohol, for instance if fingerprints or oil is just redistributed and not cleaned off the optic, then a mild soap and water solution can be used to gently wash the lens. Repeat the cleaning with isopropyl alcohol to eliminate streaks and soap residue. WARNING: Under no circumstances should ammonia-based cleaners, acetone, or other harsh solvents be used on or near the PL1 LED Luminaire. These types of cleaners or solvents can permanently damage the optics or housings of the fixture. If you have any questions regarding the use or care of your PL1 LED Luminaire, please contact Philips Selecon technical support or your local Authorized Dealer January

18 PHILIPS SELECON PL1 LED LUMINAIRE SERVICE MANUAL General Care and Equipment Handling Below are some basic tips and information on handling PL1 LED luminaires and their associated components. Locations/Use PL1 LED luminaires are designed for dry locations only. Exposure to rain or moisture (including, but not limited to, fog machines, misters, etc.) may damage luminaires. Solid State Electronics Electrostatic Discharge (ESD) Electrostatic discharge (ESD) presents a significant danger to solid state electronic components (semiconductor devices and PC board assemblies). Static electricity can build on a variety of common objects (including people) simply by handling or moving. ESD rarely results in immediate failure of a component, but shows up later as an intermittent problem or severely reduces the life of the component. PL1 LED luminaires use solid state electronics and appropriate precautions to protect them should be observed when servicing. Printed Circuit Boards (PCBs) All PC boards should be shipped in electrostatic shielding bags. When handling PC boards or components, devices such as conductive mats and conductive wrist straps should be used whenever possible. If these precautionary devices are not available, handling of PC boards and components should be avoided. CAUTION: Black foam (used to package solid state electronics) should never be used for packing batteries or put in contact with PC boards which contain batteries. Required Tools for PL1 LED Luminaire Service To properly maintain and service PL1 LED Luminaires, Philips Selecon recommends that the following tools (in addition to the tools recommended during Philips Selecon s technical training classes) be available to technicians: 90-degree Phillips head screwdriver (#2) Precision torque wrench capable of 80-in oz. Long 3mm hex driver January

19 Illustrated Parts Breakdown This chapter contains illustrated parts breakdown for all PL1 LED luminaire assemblies. Drawing Tree Top Assembly Head Enclosure Note: Cables are available as complete assemblies only. The information contained in this section is for reference only January

20 PHILIPS SELECON PL1 LED LUMINAIRE SERVICE MANUAL Drawing Tree PL1 LED Luminaire PL1 LED Luminaire PL1 Head Assembly Rev F (White) Rev F (Black) PL1 Power Enclosure Assembly Rev H (White) Rev. H (Black) PL1 Optical Assembly Rev F PL1 Infrared PCB Assembly Rev B PL1 Lens Tube Assembly Rev. A (White) Rev. A (Black) January

21 ILLUSTRATED PARTS BREAKDOWN Top Assembly PL1 LED Luminaire PL1 LED Luminaire Rev. C Refer to Figure 1. No. Item Qty. UM. Description 1 AWWSHT028 1 EA WASHER, 2 FLATS 2 SDPCAS010 1 EA KNUCKLE CAP, WHITE SDPCAS EA KNUCKLE CAP, BLACK EA HEAD ASSY, PL1, WHITE EA HEAD ASSY, PL1, BLACK EA ENCLOSURE, POWER, PL1, WHITE EA ENCLOSURE, POWER, PL1, BLACK EA PCB ASSY, IR (NOT SHOWN - AS APPLICABLE PER MODEL) EA PL1 AC INPUT CABLE (NOT SHOWN) KIT INCLUDED ITEMS KIT, PL1 5a ARLAKTOOL 1 EA ALLEN WRENCH TOOL, 2.5MM, 3.0MM, 4.0MM, 5.00MM HEY KEYS 5b EA MANUAL, PL1, USERS & INSTALLATION EA NUT, M13, 5MM THK EA SCREW, SHCS M6 X EA WASHER, WAVE, 13.5MM ID, 23.5MM OD, 1MM THK EA DOME HOLE PLUG, BLACK (FOR BLACK UNITS WHEN ORDERED WITH TRACK ADAPTERS) EA DOME HOLE PLUG, WHITE (FOR WHITE UNITS WHEN ORDERED WITH TRACK ADAPTERS) EA WASHER, NYLON, FLAT, 14.5MM ID, 25MM OD, 1.5MM THK January

22 PHILIPS SELECON PL1 LED LUMINAIRE SERVICE MANUAL PL1 LED Luminaire (continued) Included Items* 5a 5b Note, *Included with every model. Not including mounts, connectors, etc.(only available on specific models). Figure 1: PL1 LED Luminaire January

23 ILLUSTRATED PARTS BREAKDOWN Head PL1 Head Assembly Rev F (White) Rev F (Black) Refer to Figure 2. No. Item Qty. UM. Description 1 SDPMET001 1 EA TILT KNUCKLE, SDP 2 SDPPLA020 1 EA SPACER, KNOB ADJ, FOCUS, SDP EA DRIVE BOARD MOUNT, REAR EA KNOB, FOCUS ADJUST EA BODY LID, WHITE EA BODY LID, BLACK EA BODY BASE, WHITE EA BODY BASE, BLACK EA REAR VENT COVER, WHITE EA REAR VENT COVER, BLACK EA INTAKE AIR VENT, WHITE EA INTAKE AIR VENT, BLACK EA ASSY, OPTICAL, PL EA LENS TUBE, PL1, WHITE EA LENS TUBE, PL1, BLACK EA CABLE ASSY, PL1 SHIELD (NOT SHOWN) EA CABLE ASSY, PL1 THERMISTOR (NOT SHOWN) EA CABLE ASSY, PL1 12V SUPPLY (NOT SHOWN) EA CABLE ASSY, PL1 LED/DISPLAY COMM (NOT SHOWN) EA M4 6MM DIA X 9MM LENGTH EA PIN, M4 X 24MM SS EA SCREW, ALLEN CAP, M4 X 6MM EA SCREW, ALLEN CAP, M4 X 25MM EA SCREW, ALLEN CAP, M4 X 12MM EA SCREW, ALLEN CAP, M4 X 10MM EA RETAINER, M4 SCREW EA SPRING, COMPRESS SS EA WASHER, FLAT #8 SS EA WASHER, #8 LOCK, INT TOOTH January

24 PHILIPS SELECON PL1 LED LUMINAIRE SERVICE MANUAL PL1 Head Assembly (continued) (x2) 5 17 (x3) (x2) 20 (x11) 13 (x6) (x2) Figure 2: PL1 Head Assembly January

25 ILLUSTRATED PARTS BREAKDOWN PL1 Optical Assembly Rev F Refer to Figure 3. No. Item Qty. UM. Description EA SEAL, Z-AXIS STOP, ULTRA SOFT EA TUBE, SHIELD LIGHT PIPE EA Z-AXIS STOP, HEX CAST EA SEAL, LIGHT PIPE TOP EA MAIN MOUNT BAFFLE EA SUPPORT, LIGHT PIPE / LENS MOUNT EA PLATE, LIGHT PIPE / LENS MOUNT EA MOUNT SHIELD EA EMI SHIELD, COVER EA EMI SHIELD, LID EA BRACKET, FAN SUPPORT EA SUPPORT, LIGHT PIPE TOP WITH LENS EA HEAT PIPE COOLER EA PCB ASSY, LED DRIVER EA LIGHT PIPE, HEX GLASS EA THERMAL PAD EA NYLOCK M EA SCREW, 4-40 X 3/8" PPZ SEMS EA SCREW, X 1/2" PPZ EA SCREW, 4-40 X 3/8" SCSS EA ALLEN CAP SCREW, M4 X 10MM EA STANDOFF, M4 X 6MM, HEX M-F EA SPRING, COMPRESSION EA GROMMET, 9/32" ID 9/16" OD 1/4T SI EA O-RING EA LED, RGBW January

26 PHILIPS SELECON PL1 LED LUMINAIRE SERVICE MANUAL PL1 Optical Assembly (continued) 25 6 (x3) (x3) (x2) (x2) (x2) 23 (x2) (x4) 9 20 (x2) (See Torque Note) 4 2 Torque Note: Torque screws (20) to 80-in oz. using a precision torque wrench. Do not overtighten! Figure 3: PL1 Optical Assembly January

27 ILLUSTRATED PARTS BREAKDOWN PL1 Lens Tube Assembly Rev. A (White) Rev. A (Black) Refer to Figure 4. No. Item Qty. UM. Description EA LENS TUBE, LOWER, WHITE EA LENS TUBE, LOWER, BLACK EA LENS TUBE, UPPER, WHITE EA LENS TUBE, UPPER, BLACK EA LATCH, LENS TUBE, WHITE EA LATCH, LENS TUBE, BLACK EA LENS, ASPHERE, TEXTURED 100 EFL 94MM DIA EA PIN, M4 X 20MM SS Figure 4: PL1 lens Tube Assembly January

28 PHILIPS SELECON PL1 LED LUMINAIRE SERVICE MANUAL Enclosure PL1 Power Enclosure Assembly Rev H (White) Rev. H (Black) Refer to Figure 5. No. Item Qty. UM. Description 1 SAAMET002 1 EA ADAPTER, THREADED EA LABEL, TILT, PL EA COVER, CASTING, POWER ENCLOSURE, WHITE EA COVER, CASTING, POWER ENCLOSURE, BLACK EA INSULATOR, DISPLAY EDGE EA ENCLOSURE, MACHINED CASTING, PL1, WHITE EA ENCLOSURE, MACHINED CASTING, PL1, BLACK EA PCB ASSY, INFRARED, PL1 (IR ENABLED MODELS ONLY) EA CABLE ASSY, PL1 DISPLAY POWER (NOT SHOWN) EA GAP PAD EA SCREW, M3 X 5 MM PPB EA SCREW, M4 X 5 MM PPZ EA SCREW, SOCKET HEAD CAP M4 X 10 MM EA SCREW, M3 X 25 MM PPB EA WASHER, #8 LOCK INT TOOTH EA SPRING, COMPRESSION, 1.25" LG, 15.7#/IN EA STANDOFF, M-F M3 X 6 LG, 6 MM HEX EA POWER SUPPLY, 150W, +12VDC, 3 X EA MEMBRANE / OVERLAY, PL1 (FOR WHITE LUMINAIRES) EA MEMBRANE / OVERLAY, PL1 (FOR BLACK LUMINAIRES) EA KAPTON TAPE, 1-INCH EA BOARD ASSY, PLX DISPLAY January

29 0 90 ILLUSTRATED PARTS BREAKDOWN PL1 Power Enclosure Assembly (continued) (x4) 11 (x2) 13 (x2) (x3) Tilt Label Orientation 5 Note, ground screw for cable assembly. 14 (x2) 8 17 Align 90-degree mark with side of enclosure casting Note, is only available on specific models Align 0-degree mark with bottom of enclosure casting Note: Some components not shown for clarity. Power Supply Connections 10 Fixture Components (Blue) (Blue) AC Input Neutral (Blue or White*) Line (Brown or Black*) *Depending on market / model (Red) (Black) (Green) (Green) Figure 5: PL1 Power Enclosure Assembly January

30 PHILIPS SELECON PL1 LED LUMINAIRE SERVICE MANUAL PL1 Infrared PCB Assembly Rev B Refer to Figure 6. No. Item Qty. UM. Description EA PCB ASSY, IR, PL EA SCREW, M3 X 5MM PPB EA RIBBON CABLE, IR BOARD 3 2 (x2) 1 Note, this assembly is only available on specific models. Figure 6: PL1 Infrared PCB Assembly January

31 TECHNICAL BULLETINS AND NOTICES Technical Bulletins and Notices PL1 LED Luminaire Technical Bulletin List The following table identifies the current technical bulletins associated with the PL1 LED luminaire. These improvements (if any) have been incorporated into this manual. TECHNICAL BULLETIN DESCRIPTION - - For assistance with technical bulletins or notices, please contact Philips Selecon Customer Service at or entertainment.service@philips.com. PL1 LED Luminaire Technical Notice List The following table identifies the current technical notices associated with the PL1 LED luminaire. This information, as applicable, has been incorporated into this manual. TECHNICAL NOTICE DESCRIPTION January

32 PHILIPS SELECON PL1 LED LUMINAIRE SERVICE MANUAL NOTES January

33 NOTES January

34