CAL. W850 DIGITAL QUARTZ

Size: px

Start display at page:

Download "CAL. W850 DIGITAL QUARTZ"

Pierce George
5 years ago
Views:

1 NGLISH AL. W850 DIGITAL QUARTZ Full-panel dot-matrix liquid crystal panel Time/calendar 5-channel regular alarm 10-hour stopwatch with memory recall function ountdown timer with preset and adjustable timer functions World time utton operation confirmation light Illuminating light (electroluminescent panel) hangeover between normal and enlarged displays

2 MOD HANG Selection of a desired mode can be made by pressing the corresponding button in the MNU display. ALARM mode TIM/ ALNDAR mode A STOPWATH mode D TIMR mode WORLD TIM mode [MNU display] * When the desired mode is selected, the opening graphic display is shown before the selected mode appears. 2 To change over a mode to another, press button A to return to the MNU display, and then press the corresponding button to select the desired mode.

3 HANGOVR TWN NORMAL AND NLARGD DISPLAYS In all modes, the display can be selected between the normal display that shows all the data with characters of a normal size and the enlarged display that shows the main data with characters of an enlarged size. D With each press, the normal and enlarged displays alternately appear. [x. : In TIM/ALNDAR mode] D D Normal display (Data is shown in four rows) nlarged display (Data is shown in three rows) 3

4 TIM/ALNDAR MOD Once the time/calendar of your area is set in the TIM/ALNDAR mode, the times of the 38 cities covered in the WORLD TIM mode will be set automatically. hangeover between the standard time and daylight saving time can be made. A Press in MNU display to show TIM/ALNDAR mode. L mark Date Time Day A D Daylight saving time (summer time) mark Month Hourly time signal mark 4

5 TIM/ALNDAR STTING Press for 2 to 3 seconds to show TIM/ALNDAR STTING display. D or Press to select the digits to be adjusted. Selection of the digits ity Standard time/ Seconds Minutes Hour daylight saving time 12-/24-hour indication Year Set the flashing digits. (Increasing digits) Set the flashing digits. (Decreasing digits) Month Date Return to TIM/ALNDAR mode. 5

6 SHOWING TH SLTD ITY Press to show the city selected for TIM/ALNDAR mode. * The name of the selected city is displayed in place of the day, scrolls from right to left, and then the day is displayed again. TURNING ON/OFF OF HOURLY TIM SIGNAL AND UTTON OPRATION ONFIRMATION SOUND Hourly time signal mark With each press, the hourly time signal and sound for button operation confirmation are alternately switched on and off. * When the hourly time signal mark is displayed, the hourly time signal rings every hour on the hour and the confirmation sound beeps with each press of the buttons. 6

7 DMONSTRATION FUNTION Provided with a demonstration function, the watch shows the displays in each mode. Press for 3 seconds in TIM/ALNDAR mode to start the demonstration. * The name of the selected city appears in place of the day, and then the demonstration display will start, showing the display of each mode repeatedly. * To stop the demonstration, press any of the buttons. ADJUSTING TH ONTRAST ON TH DISPLAY Press for 5 to 6 seconds in TIM/ALNDAR mode to show ONTRAST ADJUSTMNT display. or Press repeatedly to adjust the contrast. Return to TIM/ALNDAR mode. 7

8 ALARM MOD The alarm can be set to ring daily at five different times a day. The alarms can be engaged and disengaged independently of one another. Press in MNU display to show ALARM mode. urrent time Set alarm time Alarm mark D ON mark Alarm channel 8

9 ALARM TIM STTING Press to select the desired alarm channel (h.-1 h.-5). Press for 2 to 3 seconds to show ALARM STTING display. D or Press to select the digits to be adjusted (hour/minutes). Set the flashing digits. (Increasing digits) Set the flashing digits. (Decreasing digits) Return to ALARM mode. * ON and the alarm marks appear and the alarm is automatically engaged. 9

10 ALARM NGAGMNT/DISNGAGMNT The alarms can be engaged and disengaged independently of one another. Press to select the desired alarm channel (h.-1 h.-5). Alarm mark ON / OFF mark With each press, the selected alarm is engaged and disengaged alternately. * At the designated time, the alarm rings for 20 seconds. To stop it manually, press any of the buttons. 10

11 STOPWATH MOD The stopwatch measures up to 10 hours in 1/100 second increments. Press in MNU display to show STOPWATH mode. urrent time Start / Stop / Restart Time measured Measure lap & split time / Reset Lap time and split time measurement START LAP/SPLIT 1 LAP/SPLIT 2 STOP RST 11

12 MMORY RALL FUNTION The first 199 lap and split times are automatically stored in memory. The stored data can be recalled either during or after the measurement. or Press to activate the memory recall function.* With each press, stored data are recalled from the oldest to the newest. With each press, stored data are recalled from the newest to the oldest. Return to STOPWATH mode. 12 * In memory recall after measurement, the oldest measurement in memory is displayed. In memory recall during measurement, the newest measurement in memory is displayed.

13 TIMR MOD Two types of timer are available: 10-channel preset timer and adjustable timer. The adjustable timer can be set up to 9 hours and 59 minutes in minute increments. D Press in MNU display to show TIMR mode. urrent time Set time D 13

14 PRST TIMR STTING Press to select the desired preset time. Selection of the preset time/adjustable timer 1 min. 2 min. 3 min. 4 min. 5 min. 10 min. Adjustable timer 1 hour 45 min. 30 min. 15 min. ADJUSTAL TIMR STTING Press to select the adjustable timer. (See above) 14 D Press for 2 to 3 seconds to show ADJUSTAL TIMR STTING display. Press to select the digits to be adjusted (hour/minutes).

15 or Set the flashing digits. (Increasing digits) Set the flashing digits. (Decreasing digits) Return to TIMR mode. TIMR OPRATION Start / Stop / Restart Time measured Reset No. of times the countdown is repeated * When the set time is up, a warning sound beeps for 5 seconds. To stop it manually, press any of the buttons. 15

16 WORLD TIM MOD The time of 38 cities in different time zones throughout the world can be displayed together with their respective country code for overseas telephone call. Press in MNU display to show WORLD TIM mode. urrent time of selected city ity mark D ountry code 16 or Press to select the desired city. * The name of the selected city scrolls from right to left.

17 * In the normal display, the daylight saving time (summer time) mark, country code, time and city name are shown. HANGOVR TWN STANDARD TIM AND DAYLIGHT SAVING TIM If the daylight saving time is effective in the selected city, press to show the daylight saving time. * With each press of button, the standard time and daylight saving time of the city are alternatively shown. TIM DIFFRNS AND OUNTRY ODS GMT = Greenwich Mean Time (As of April 1998) GMT ity mark ity name ountry name ountry code ± (hours) G M T L O N P A R R O M Greenwich* London* Paris* Rome* United Kingdom United Kingdom France Italy

18 18 GMT ± (hours) ity mark ity name ountry name ountry code R A T H A I J R S M O W J D R U H T H R D X K L K H I D L D A R G N K K H K G J S T Y O erlin* Athens* airo* Jerusalem* Moscow* Jeddah Riyadh Tehran* Dubai Kabul Karachi Delhi Dhaka Yangon angkok Hong Kong eijing Tokyo Germany Greece gypt Israel Russia Saudi Arabia Saudi Arabia Iran United Arab mirates Afghanistan Pakistan India angladesh Myanmar Thailand hina hina Japan

19 GMT ± (hours) ity mark ity name ountry name ountry code A D L S Y D N O U W L G H N L A N Y V R L A X D N H I N Y Y M Q S U R I O P D L Adelaide* Sydney* Noumea Wellington* Honolulu Anchorage* Vancouver* Los Angeles* Denver* hicago* New York* Montreal* aracas uenos Aires Rio de Janeiro* Azores Is.* Australia Australia New aledonia New Zealand U.S.A. U.S.A. anada U.S.A. U.S.A. U.S.A. U.S.A. anada Venezuela Argentina razil Azores Islands * The cities marked with * use daylight saving time (summer time)

20 ILLUMINATING LIGHT (lectroluminescent panel) F Turn on the illuminating light. 20 * The display panel is evenly illuminated for 3 seconds. TURNING ON/OFF OF UTTON OPRATION ONFIRMATION LIGHT L mark F F F With each continuous press for 2 to 3 seconds, the button operation confirmation light is alternately turned on and off. * When the L mark is turned on, the display is illuminated for 2 seconds with each press of a button to operate the watch.

21 NOTS ON USING TH WATH TIM/ALNDAR MOD [TIM/ALNDAR STTING] The calendar automatically adjusts for odd and even months including February of leap years from 1998 to Once the year, month and date have been set, the day of the week is automatically set. Setting the seconds: With the second digits flashing, press button or in accordance with a time signal. The second digits are reset to 00. When the seconds count any number from 30 to 59 and button or is pressed, one minute is added and the seconds are reset to 00. The flashing digits except the seconds, standard time/daylight saving time and 12-/24- hour indication move quickly if button or is kept pressed. If the watch is left untouched with the digits flashing, it will automatically return to the TIM/ALNDAR mode in 2 to 3 minutes. Note on unusual display: While setting the time/calendar, all the segments of the display will light up if both buttons and D are pressed at the same time. This is not a malfunction. Press any one of the buttons to return to the TIM/ALNDAR mode, and then set the time/calendar again. [ADJUSTING TH ONTRAST ON TH DISPLAY] The contrast on the liquid crystal display can be adjusted in 16 steps from level 0 to 21

22 15. The contrast becomes higher as the digits indicating the contrast level increase and becomes lower as they decrease. The contrast level has been initially set at 10 at the factory. When the contrast level is set to 0, the digits on the display will be unable to read. With each press of buttons and, the contrast level increases and decreases by one, respectively. ALARM MOD [ALARM TIM STTING] The flashing digits move quickly if button or is kept pressed. If the watch is left untouched with the digits flashing, it will automatically return to the ALARM mode in 2 to 3 minutes. When the time function is displayed in the 24-hour indication, the alarms are also displayed in the 24-hour indication. [ALARM NGAGMNT/DISNGAGMNT] When any one of the alarms is engaged, the alarm mark is displayed. Alarm test: The alarm can be tested by keeping buttons and D pressed in the TIM/ ALNDAR mode. 22 STOPWATH MOD After 10 hours have been measured, the stopwatch continues measuring from 00. If it is left counting for more than 100 hours, it will automatically be stopped and reset to 00. Restart and stop of the stopwatch can be repeated by pressing button.

23 Measurement of the lap time and split time can be repeated by pressing button. The lap number counts up to 199. After 199, the number is displayed in two digits such as 00 for 200, 01 for 201, and so on. The lap time and split time measured remain displayed for 10 seconds together with the flashing lap number. Then, the display automatically returns to the measurement in progress. Lap time Split time Lap No. ven if the digits are reset to 00 in the stopwatch measurement, the stored data is not erased and can be recalled unless a new measurement is started. ven if the STOPWATH mode is changed to another while the measurement is in progress, it continues counting properly. After the stopwatch is used, however, be sure to reset it as the battery energy is consumed enormously to shorten the battery life. [MMORY RALL FUNTION] In the normal display, the lap number is displayed at the bottom row. In the enlarged display, the split time is displayed together with the split number. If no measurement is made, NO DATA will be displayed when button is pressed to activate the memory recall function. 23

24 TIMR MOD The timer counts down the set time repeatedly up to 10 times unless stopped. [ADJUSTAL TIMR STTING] The flashing digits move quickly if button or is kept pressed. If the watch is left untouched with the digits flashing, it will automatically return to the TIMR mode in 2 to 3 minutes. [TIMR OPRATION] Restart and stop of the timer can be repeated by pressing button. WORLD TIM MOD In the enlarged display, DST (Daylight saving time mark) is not displayed. The time differences and use of daylight saving time may change in some areas or countries when they are so decided by the countries concerned. ILLUMINATING LIGHT (lectroluminescent panel) The electroluminescent panel loses its luminance as the battery voltage gets lowered. Also, its luminance level decreases gradually with use. [TURNING ON/OFF OF UTTON OPRATION ONFIRMATION LIGHT] This function is deactivated automatically in 11 to 12 hours after it is activated. 24

25 ATTRY HANG 2 Years attery life : Approx. 2 years attery : SIKO R2025 The battery life may be less than 2 years if the alarm is used more than once a day and/ or the illuminating light more than 3 times a day. As the battery is inserted at the factory to check the function and performance of the watch, its actual life once in your possession may be less than the specified period. When the battery expires, be sure to replace it as soon as possible to prevent any malfunction. We recommend that you contact an AUTHORIZD PULSAR DALR for battery replacement. attery life indicator When all the digits start flashing, have the battery replaced with a new one as soon as possible. Necessary procedure after battery change After the battery is replaced with a new one or if an abnormal display (broken digits, etc.) appears, follow the procedure below to reset the I. 25

26 Press and hold buttons A,, and at the same time for 2 to 3 seconds. The display will become blank, and the MNU display will appear when the buttons are released. Then, press button A. TIM 1-JAN A12:00'00" THU will be displayed. * efore using the watch, set the time/calendar and alarm. WARNING Do not remove the battery from the watch. If it is necessary to take out the battery, keep it out of the reach of children. If a child swallows it, consult a doctor immediately. Never short-circuit, tamper with or heat the battery, and never expose it to fire. The battery may burst, become very hot or catch fire. AUTION The battery is not rechargeable. Never attempt to recharge it, as this may cause battery leakage or damage to the battery. 26

27 TO PRSRV TH QUALITY OF YOUR WATH WATR RSISTAN Non-water resistant If the watch becomes wet, have it checked by an AUTHORIZD PULSAR DALR or SRVI NTR. Water resistant 5/10/15/20 bar 5 bar WR 10/15/20 bar WR Do not operate the buttons when the watch is wet or in water. If used in sea water, rinse the watch in fresh water and dry it completely. When taking a shower with the water resistant 5 bar watch, or taking a bath with the water resistant 10, 15 or 20 bar watch, be sure to observe the following: * Do not operate the buttons when the watch is wet with soapy water or shampoo. * If the watch is left in warm water, a slight time loss or gain may be caused. This condition, however, will be corrected when the watch returns to normal temperature. 27

28 * Pressure in bar is a test pressure and should not be considered as corresponding to actual diving depth since swimming movement tends to increase the pressure at a given depth. are should also be taken on diving into water. ** We recommend that you wear a PULSAR Diver s Watch for scuba diving. 28 TMPRATURS Your watch works with +50 stable accuracy within a -10 temperature range of 5 and 35 (41 F and 95 F). Temperatures over 50 (122 F) or below 10 (+14 F) may cause a slight time loss or gain or battery leakage or shorten the battery life. Also, the liquid crystal panel may decrease in contrast, and the electroluminescent light may illuminate for a shorter period of time. However, the above conditions will be corrected when the watch returns to normal temperature. MAGNTISM N S Your watch will not be affected by magnetism. AR OF AS AND RALT To prevent possible rusting of the case and bracelet caused by dust, moisture and perspiration, wipe them periodically with a soft dry cloth.

29 SHOKS & VIRATION HMIALS Light activities will not affect your watch, but be careful not to drop your watch or hit it against hard surfaces, as this may cause damage. e careful not to expose the watch to solvents, mercury, cosmetic spray, detergents, adhesives or paints. Otherwise, the case, bracelet, etc. may become discolored, deteriorated or damaged. PRIODI HK 2-3 Years It is recommended that the watch be checked once every 2 to 3 years. Have your watch checked by an AUTHORIZD PULSAR DALR or SRVI NTR to ensure that the case, buttons, gasket and crystal seal remain intact. PRAUTION RGARDING AS AK PROTTIV FILM If your watch has a protective film and/or a sticker on the case back, be sure to peel them off before using your watch. 29

30 STATI LTRIITY The I (Integrated ircuit) used in your watch will be affected by static electricity which may disturb the display. Keep the watch away from close contact with objects such as TV screens which emit strong static electricity. LIQUID RYSTAL PANL 5 Years The normal life expectancy for the liquid crystal panel of the watch is approximately 5 years. After that it may decrease in contrast, becoming difficult to read. Please contact your AUTHORIZD PULSAR DALR or SRVI NTR if you wish to have a new panel fitted (guaranteed one year). 30

CAL. V091 DUO-DISPLAY QUARTZ

CAL. V091 DUO-DISPLAY QUARTZ CL. V091 DUO-DISPLY QURTZ nalogue time display Digital time and calendar 100-hour stopwatch with lap time signal function Memory recall function Countdown timer 5-channel daily alarm Illuminating light