LCD TV PLASMA TV OWNER S MANUAL

Transcription

1 LCD TV PLASMA TV OWNR S MANUAL LCD TV MODLS 6LCR* 7LCR* LCR* LCR* 6LCR* LCR* LXR* LR* 7LR* LR* PLASMA TV MODLS PCRV* PCRV* PCRA* Please read Information Manual included together before reading this manual and operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. NLISH DUTSCH FRANÇAIS ITALIANO SPAÑOL PORTUUÊS NDRLANDS ÏÏËÓÈÎ

2

3 Owner s manual TIM RVAL INDX? 0 MUT ACCSSORIS nsure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the product. Owner's Manual VOL 6 Q.VIW PR XIT LIST I/II MNU ARC TXT INPUT TV PIP PR- PIP PR+ PIP INPUT SLP INPUT PIP SIZ POSTION POWR VCR DVD TV ACCSSORIS FAV * Owner s Manual Batteries Remote Control Power Cord For PCRV*, PCRV*, PCRA* -Wall brackets -eye-bolts -bolts for stand assembly Refer to p. This feature is not available for all models. For 6LCR*, 7LCR*, LCR*, LCR*, 6LCR*, LCR*, LXR*, LR*, 7LR*, LR* 6LCR*, LCR*, LCR*, LR*only 6LCR*, 7LCR*, LCR*, LCR*, LR*, 7LR*, LR* -TV brackets -Wall brackets Twister Holder Arrange the wires with the twister holder. -bolts for stand assembly Cable Management 6LCR*, LCR* -bolts Cable Management

4 CONTNTS ACCSSORIS TVMNU CONTNTS INTRODUCTION Controls / Connection Options Remote Control Key Functions Installing Batteries INSTALLATION Stand Installation Basic Connection / How to Remove the Cable Management How to join the product assembly to the wall to protect the set tumbling CONNCTIONS & STUP Antenna Connection VCR Setup xternal quipment Connections DVD Setup STB Setup PC Setup Turning the TV On SPCIAL FUNCTIONS PIP (Picture-In-Picture) Watching PIP Programme Selection for Sub Picture Input Source Selection for Sub Picture Sub Picture Size Adjustment (PIP mode only).. Moving the Sub Picture (PIP mode only)... Teletext Switch on/off SIMPL Text TOP Text FASTXT Special Teletext Functions On Screen Menus Selection and Adjustment Setting up TV stations Auto programme tuning Manual programme tuning Fine tuning Assigning a station name Programme edit Favourite programme Calling the programme table Picture Menu Options PSM (Picture Status Memory) Picture Adjustment (PSM-User option) CSM (Colour Status Memory) Manual Colour Temperature Control (CSM - User option) Function ADVANCD-CINMA ADVANCD-BLACK LVL Reset Sound Menu Options SSM (Sound Status Memory) Sound Frequency Adjustment (SSM - User option) AVL (Auto Volume Leveler) Balance Adjustment Speaker Stereo/Dual Reception NICAM Reception Speaker Sound Output Selection Time Menu Options Clock Setup On/Off Time Auto Sleep Sleep Timer Special Menu Options Child Lock ISM (Image Sticking Minimization) Method...6 Low Power XD Demo

5 TVMNU Screen Menu Options Auto Configure (RB [PC] mode only) Manual Configure Setting the Picture Format Selecting Wide VA/XA mode Initializing (Reset to original factory settings) CONTNTS APPNDIX Programming the Remote Programming code Troubleshooting Checklist Maintenance Product Specifications

6 INTRODUCTION CONTROLS This is the front panel of models PCRV* TVs. This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. INTRODUCTION Front Panel Controls Power/Standby Indicator illuminates red in standby mode. illuminates white when the set is switched on. INPUT MNU VOL PR INPUT Button POWR Button MNU Button Button VOLUM Buttons PRORAMM Buttons

7 This is the front panel of models PCRV*, PCRA* TVs. This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. Front Panel Controls PR PRORAMM Buttons INTRODUCTION VOL VOLUM Buttons MNU INPUT Button MNU Button INPUT Button ON/OFF Button Remote Control Sensor Power/Standby Indicator illuminates red in standby mode. illuminates white when the set is switched on.

8 INTRODUCTION CONNCTION OPTION This is the back panel of models PCRV*, PCRV*, PCRA* TVs. INTRODUCTION Back Connection Panel PCRV* only AV IN R AUDIO L/MONO VIDO AUDIO Input Connections are available for listening stereo sound from an external device. VIDO Input Connects the video signal from a video device. 6 AV AV COMPONNT IN RB IN (PC/DTV) HDMI IN AC IN VIDO AV IN AUDIO RMOT AUDIO IN CONTROL IN (RB) VARIABL AUDIO OUT ANTNNA IN S-VIDO VIDO ( MONO) AUDIO RS-C IN (CONTROL& SRVIC) uro Scart Socket (AV/AV) Connect scart socket input or output from an external device to these jacks. Component Input Connect a component video/audio device to these jacks. Remote Control Port Connect your wired remote control here. RB/Audio Input Connect the monitor output from a PC to the appropriate input port. HDMI Input Connect a HDMI signal to HDMI port with HDMI cable. Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power S-Video Input Connect S-Video out from an S-VIDO device. Audio/Video Input Connect audio/video output from an external device to these jacks. RS-C Input (CONTROL&SRVIC) Port Connect the serial port of the control devices to the RS-C jack. Variable Audio Output Connect an external amplifier or add a subwoofer to your surround sound system. Antenna Input Connect over-the-air signals to this jack. 6

9 R R This is the front panel of models 6LCR*, 6LCR*, 7LCR*, LCR*, LCR*, LCR*, LR*, 7LR*, LR* TVs. This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. Front Panel Controls 6LCR*, 7LCR*, LCR*, LCR*, LR*, 7LR*, LR* INTRODUCTION PR PRORAMM Buttons Remote Control Sensor Power/Standby Indicator illuminates red in standby mode. illuminates white when the set is switched on. 6LCR*, LCR* VOL MNU INPUT /I VOLUM Buttons Button MNU Button INPUT Button ON/OFF Button Remote Control Sensor Power/Standby Indicator illuminates red in standby mode. illuminates white when the set is switched on. 7

10 INTRODUCTION CONTROLS This is the front panel of models LXR* TV. This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. INTRODUCTION Front Panel Controls Remote Control Sensor Power/Standby Indicator illuminates red in standby mode. illuminates white when the set is switched on. PR VOL INPUT ON/OFF PRORAMM Buttons VOLUM Buttons Button MNU Button INPUT Button POWR Button 8

11 CONTROLS This is the back panel of models 6LCR*, 6LCR*, 7LCR* TVs. Back Connection Panel 6LCR* 7LCR* AV IN AV IN AC IN AUDIO VIDO L/MONO R 6LCR* L/MONO R AUDIO VIDO AUDIO Input Connections are available for listening stereo sound from an external device. VIDO Input Connects the video signal from a video device. INTRODUCTION 6 AC IN COMPONNT IN RB IN (PC/DTV) HDM IN VIDO AV IN AUDIO RMOT CONTROL IN AUDIO IN (RB) AV AV S-VIDO VIDO ( MONO) AUDIO RS-C IN (CONTROL& SRVIC) VARIABL AUDIO OUT ANTNNA IN Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. uro Scart Socket (AV/AV) Connect scart socket input or output from an external device to these jacks. Component Input Connect a component video/audio device to these jacks. Remote Control Port Connect your wired remote control here. RB/Audio Input Connect the monitor output from a PC to the appropriate input port. HDMI Input Connect a HDMI signal to HDMI port with HDMI cable S-Video Input Connect S-Video out from an S-VIDO device. Audio/Video Input Connect audio/video output from an external device to these jacks. RS-C Input (CONTROL&SRVIC) Port Connect the serial port of the control devices to the RS-C jack. Variable Audio Output Connect an external amplifier or add a subwoofer to your surround sound system. Antenna Input Connect over-the-air signals to this jack. 9

12 INTRODUCTION CONTROLS This is the back panel of models LCR*, LCR*, LCR*, LXR*, LR*, 7LR*, LR* TVs. L/MONO VIDO AV IN AV IN AC IN AV V RB IN (PC/DTV) COMPONNT IN VIDO AUDIO UDIO HDM IN RMOT AUDIO IN CONTROL IN (RB) VARIABL (MONO) 7 AUDIO UDIO 9 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. uro Scart Socket (AV/AV) Connect scart socket input or output from an external device to these jacks. Component Input Connect a component video/audio device to these jacks. Remote Control Port Connect your wired remote control here. 0 AUDIO OUT ANTNNA IN 0 RS-C IN (CONTROL & SRVIC) 8 RB/Audio Input Connect the monitor output from a PC to the appropriate input port. 6 HDMI Input Connect a HDMI signal to HDMI port with HDMI cable. R AUDIO Input Connections are available for listening stereo sound from an external device. AV IN S-VIDO VIDO AV IN 6 AV AC IN L/MONO R AUDIO AUDIO LCR* 7LR* LR* VIDO INTRODUCTION LCR* LCR* LXR* LR* MONO AUDIO R VIDO L/MONO Back Connection Panel VIDO Input Connects the video signal from the video device. 7 S-Video Input Connect S-Video out from an S-VIDO device. 8 Audio/Video Input Connect audio/video output from an external device to these jacks. 9 RS-C Input (CONTROL&SRVIC) Port Connect the serial port of the control devices to the RS-C jack. 0 Variable Audio Output Connect an external amplifier or add a subwoofer to your surround sound system. Antenna Input Connect over-the-air signals to this jack.

13 RMOT CONTROL KY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. INPUT TV INPUT POWR TV DVD POWR TV INPUT Switches the set on from standby or off to standby. Returns to the TV viewing from any mode. Switches the set on from standby. ARC VCR TXT PIP SIZ POSTION PIP PR- PIP PR+ PIP INPUT INPUT If you press the button once, the input source OSD will appear on screen as shown. Press the D / button and then button to select the desired input source (TV, AV, AV, S-Video, AV, AV (except PCRV*, PCRA*), Component, RB, or HDMI). INTRODUCTION ARC Selects your desired picture format. LIST XIT MNU I/II SLP Brightness adjustment Adjusts screen brightness. It returns to the default settings brightness by changing mode source. PIP Switches the sub picture PIP, DW mode. SIZ Adjusts the sub picture size. POSITION Moves the sub picture. VOL Q.VIW PR PIP PR - /+ Selects a programme for the sub picture. MUT PIP INPUT Selects the input source for the sub picture in PIP/Twin picture mode * 0 FAV TIM RVAL INDX? Coloured buttons VCR/DVD control buttons XIT These buttons are used for teletext (only TLTXT models) or Programme edit. Controls some video cassette recorders or DVD players when you have already selected DVD or VCR mode button. Clears all on-screen displays and returns to TV viewing from any menu. LIST MNU I/II SLP Displays the programme table. Selects a menu. Selects the sound output. Sets the sleep timer.

14 INTRODUCTION MOD Selects the remote operating modes. INTRODUCTION INPUT TV POWR TV INPUT DVD ARC VCR TXT PIP SIZ POSTION PIP PR- PIP PR+ PIP INPUT TLTXT BUTTONS THUMBSTICK (Up/Down/Left Right) These buttons are used for teletext. For further details, see the Teletext section. Allows you to navigate the on-screen menus and adjust the system settings to your preference. Accepts your selection or displays the current mode. XIT LIST MNU I/II SLP VOLUM UP /DOWN Q.VIW Adjusts the volume. Returns to the previously viewed programme. MUT Switches the sound on or off. Programme UP/DOWN Selects a programme. 0~9 number button Selects a programme. Selects numbered items in a menu. VOL Q.VIW PR FAV * Displays the selected favourite programme. No function MUT 6 INSTALLIN BATTRIS FAV * TIM RVAL INDX? Open the battery compartment cover on the back side and install the batteries matching correct polarity (+ with +, - with -). Install two.v AA batteries. Don t mix old or used batteries with new ones. Close cover.

15 INSTALLATION STAND INSTALLATION This feature is not available for all models. A INSTALLATION B C Place the set with the screen facing down on a cushion or soft cloth as shown in Figures. Before unfolding the stand,please make sure two locks (A)on the bottom of the stand push outward. Pull the stand out as shown above in Figures ~. After unfolding the stand,please insert and tighten the screws in the holes (B)on the bottom of the stand. When connecting cables to the set,do not disengage the lock (C). This may cause the set to fall,causing serious bodily injury and serious damage to the set.! NOT Figures shown here may be slightly different from your set. When closing the stand for storage First remove the screws in the holes (B)on the bottom of the stand.and then pull two Hooks (D)of the stand bottom and fold the stand into the back of the set. After folding,push two Locks (A)of the stand bottom outward. D A B

16 INSTALLATION STAND INSTALLATION (Only 6LCR*, LCR*, LCR*, LR*) Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. INSTALLATION Place the product stand on the product as shown. Install the bolts securely, in the back of the product in the holes provided.

17 SAC0060_en_-rev0 8/8/06 :0 PM Page BASIC CONNCTION (PCRV*, PCRV*, PCRA*) These models have two cable arrangement methods according to the stand type. Stand type Arrange the cables as shown picture. INSTALLATION Stand type Hold the C A B L M A N A M N T with both hands and push it as shown. CABL MANAMNT Connect the cables as necessary. To connect an additional equipment, see the x t e r n a l e q u i p m e n t C o n n e c t i o n s section. Reinstall the C A B L M A N A M N T as shown.

18 INSTALLATION BASIC CONNCTION (Only 6LCR*, 7LCR*, LCR*, LCR*, 6LCR*, LCR*, LR*, 7LR*, LR*) Connect the cables as necessary. After connecting the cables neatly, arrange the cables to the Cable Holder. To connect an additional equipment, see the x t e r n a l e q u i p m e n t C o n n e c t i o n s section. INSTALLATION Install the C A B L M A N A M N T as shown. CABL MANAMNT Bundle the cables using the supplied twister holder. HOW TO RMOV TH CABL MANAMNT - Hold the C A B L M A N A M N T with both hands and pull it upward. - Hold the C A B L M A N A M N T with both hands and pull it downward. (Only LCR*)! NOT Do not hold the CABL MANAMNT when moving the product. - If the product is dropped, you may be injured or the product may be broken. 6

19 BASIC CONNCTION (LXR*) Hold the cover with both hands and pull it backward. Connect the cables as necessary. To connect an additional equipment, see the x t e r n a l e q u i p m e n t C o n n e c t i o n s section. INSTALLATION Antenna Bundle the cables using the supplied twister holder. SWIVL STAND (LXR*) The TV can be conveniently swiveled on its stand 0 to the left or right to provide the optimum viewing angle. 7

20 INSTALLATION The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally. ROUNDIN Power Supply INSTALLATION nsure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Short-circuit Breaker Desktop Pedestal Installation For proper ventilation, allow a clearance of " on each side and from the wall. inches inches inches inches Wall Mount: Horizontal installation For proper ventilation, allow a clearance of " on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup uide. inches inches inches inches inches < O n l y P C R V*, P C R V*, P C R A* s e r i e s > Remove two screws of the backside of the set before installing the wall mounting bracket. 8

21 HOW TO JOIN TH PRODUCT ASSMBLY TO TH WALL TO PROTCT TH ST TUMBLIN Set it up close to the wall so the product doesn t fall over when it is pushed backwards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn t fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people. It will also prevent the product from damage caused by fall. Please make sure that children don t climb on or hang from the product. LCD TV models Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on the wall. Match the height of the bracket that is mounted on the wall. INSTALLATION Plasma TV models Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.! NOT When moving the product to another place undo the ropes first. Use a product holder or a cabinet that is big and strong enough for the size and weight of the product. To use the product safely make sure that the height of the bracket that is mounted on the wall is same as that of the product. 9

22 CONNCTIONS & STUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ANTNNA CONNCTION For optimum picture quality, adjust antenna direction. An antenna cable and converter are not supplied. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket ANTNNA IN RF Coaxial Wire (7 ohm) CONNCTIONS & STUP VHF Antenna UHF Antenna Outdoor Antenna Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) Turn clockwise to tighten. In poor signal areas, to get better picture quality, install a signal amplifier to the antenna as shown to the right. If signal needs to be split for two TVs, use an antenna signal splitter for connection. VHF UHF ANTNNA IN Signal Amplifier 0

23 VCR STUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. Typically a frozen still picture from a VCR. If the : picture format is used; the fixed images on the sides of the screen may remain visible on the screen. When connecting with an antenna Connect the ANT OUT socket of the VCR to the ANTNNA IN socket on the set. VCR ANT IN IN Connect the antenna cable to the ANT IN socket of the VCR. Press the PLAY button on the VCR and match the appropriate programme between the TV and VCR for viewing. HDMI IN VARIABL AUDIO OUT ANTNNA IN ANT OUT S-VIDO OUTPUT SWITCH OUT (R) AUDIO (L) VIDO CONNCTIONS & STUP When connecting with a RCA cable Connect the AUDIO/VIDO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). VCR ANT IN ANT OUT S-VIDO OUTPUT SWITCH IN OUT (R) AUDIO (L) VIDO Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.) AV AV Select AV input source using the INPUT button on the remote control. - If connected to AV IN, select AV input source. (except PCRV*, PCRA*) COMPONNT IN VIDO AV IN AUDIO S-VIDO VIDO ( MONO) AUDIO! NOT If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the set.

24 CONNCTIONS & STUP VCR STUP When connecting with a uro Scart Connect the uro scart socket of the VCR to the AV uro scart socket on the set. AV AV COMPONNT IN VIDO AUDIO Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.) AV IN S-VIDO VIDO ( MONO) AUDIO CONNCTIONS & STUP! Select AV input source with using the INPUT button on the remote control. - If connected to AV uro scart socket, select AV input source. NOT (R) AUDIO (L) If the S-VIDO(Y/C) signal is received through the uro scart socket (AV), you must change to the S- Video mode. If you want to use the URO scart cable, you have to use the signal shielded uro scart cable. When connecting with an S-Video cable VCR AUDIO/ VIDO Connect the S-VIDO output of the VCR to the S-VIDO input on the set. The picture quality is improved; compared to normal composite (RCA cable) input. VCR ANT IN ANT OUT S-VIDO OUTPUT SWITCH IN OUT (R) AUDIO (L) VIDO Connect the audio outputs of the VCR to the AUDIO input jacks on the set. AV AV COMPONNT IN Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.) VIDO AV IN AUDIO Select AV input source with using the INPUT button on the remote control. S-VIDO VIDO ( MONO) AUDIO! NOT If both S-VIDO and VIDO sockets have been conneced to the S-VHS VCR simultaneously, only the S- VIDO can be received.

25 XTRNAL QUIPMNT CONNCTIONS Connect the AUDIO/VIDO jacks between TV and external equipment. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) AV IN R AUDIO L/MONO VIDO Select AV input source with using the INPUT button on the remote control. (except PCRV*, PCRA*) - If connected to AV IN input, select AV input source. Camcorder Operate the corresponding external equipment. Refer to external equipment operating guide. Video ame Set R AUDIO L VIDO CONNCTIONS & STUP

26 CONNCTIONS & STUP DVD STUP When connecting with a component cable DVD B Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N N T I N V I D O jacks on the set. Connect the audio outputs of the DVD to the C O M P O N N T I N A U D I O jacks on the set. Turn on the DVD player, insert a DVD. (R) AUDIO (L) R AV AV COMPONNT IN VIDO AUDIO AV IN ( MONO) AUDIO S-VIDO VIDO CONNCTIONS & STUP Select C o m p o n e n t input source with using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions.! NOT Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. AV IN Component ports on the TV ( S-VIDO VIDO Video output ports on DVD player ) AUDIO Y PB PR Y Y Y Y Pb B-Y Cb PB Pr R-Y Cr PR When connecting with a uro Scart Connect the uro scart socket of the DVD to the A V uro scart socket on the set. Turn on the DVD player, insert a DVD. Select AV input source with using the I N P U T button on the remote control. - If connected to A V uro scart socket, select AV input source. AV V AV COMPONNT IN VIDO AV IN S-VIDO VIDO DVD! NOT AUDIO Please use the shield scart cable. AUDIO/ VIDO (R) AUDIO (L) ( MONO ) AUDIO

27 When connecting with a S-Video cable Connect the S-VIDO output of the DVD to the S-VIDO input on the set. DVD (R) AUDIO (L) S-VIDO Connect the audio outputs of the DVD to the AUDIO input jacks on the set. AV AV COMPONNT IN Turn on the DVD player, insert a DVD. VIDO AV IN AUDIO Select AV input source with using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. When connecting with a HDMI cable S-VIDO VIDO ( MONO) AUDIO CONNCTIONS & STUP Connect the HDMI output of the DVD to the HDMI IN jack on the set. RB IN (PC/DTV) HDMI IN Select HDMI input source with using the INPUT button on the remote control. RMOT AUDIO IN CONTROL IN (RB) RS-C IN (CONTROL& SRVIC) VARIABL AUDIO OUT Refer to the DVD player's manual for operating instructions. DVD HDMI-DVD OUTPUT! NOT TV can receive the video and audio signal simultaneously with using a HDMI cable. If the DVD supports Auto HDMI function, the DVD output resolution will be automatically set to 80x70p. If the DVD does not support Auto HDMI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the DVD to 80x70p.

28 CONNCTIONS & STUP STB (ST-TOP BOX) STUP When connecting with a component cable Connect the video outputs (Y, PB, PR) of the digital set-top box to the C O M P O N N T I N V I D O jacks on the set. Connect the audio output of the digital set-top box to the C O M P O N N T I N A U D I O jacks on the set. Digital Set-top Box (R) AUDIO (L) R AV B AV Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) COMPONNT IN VIDO CONNCTIONS & STUP Select Component input source with using the I N P U T button on the remote control. S-VIDO VIDO! NOT Component RB-DTV 80i/76i Signal Yes No No 80p/76p/70p/080i Yes Yes Yes AUDIO AV IN ( MONO) AUDIO HDMI When connecting with a HDMI to DVI cable AV IN Connect the DVI output of the digital set-top box to the H D M I I N jack on the set. RB IN (PC/DTV) S-VIDO VIDO RMOT CONTROL IN Connect the audio outputs of the set-top box to the A U D I O I N ( R B ) jack on the set. Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) Select HDMI input source with using the I N P U T button on the remote control. AUDIO IN (RB) RS-C IN (CONTROL & SRVIC) HDMI ( ) IN AUDIO VARIABL AUDIO UDIO OUT Digital Set-top Box DVI-DTV OUTPUT (R) AUDIO (L)! NOT 6 If the digital set-top box has a DVI output and no HDMI output, a separated audio connection is necessary. If the digital set-top box supports Auto DVI function, the output resolution of the digital set-top box will be automatically set to 80x70p. If the digital set-top box does not support Auto DVI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the digital set-top box to 80x70p. RB IN (PC/DTV) HDMI IN VARIABL AUDIO OUT

29 When connecting with a D-sub pin cable Connect the RB output of the digital set-top box to the RB IN (PC/DTV) jack on the set. (R) AUDIO (L) RB-DTV OUTPUT Digital Set-top Box Connect the audio outputs of the set-top box to the AUDIO IN (RB) jack on the set. Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) RB IN (PC/DTV) HDMI IN Select RB-DTV input source with using the INPUT button on the remote control. When connecting with a HDMI cable Connect the HDMI output of the digital set-top box to the HDMI IN jack on the set. RB IN (PC/DTV) RMOT CONTROL IN AUDIO IN (RB) RS-C IN (CONTROL& SRVIC) HDMI IN VARIABL AUDIO OUT CONNCTIONS & STUP Select HDMI input source with using the INPUT button on the remote control. RMOT AUDIO IN CONTROL IN (RB) RS-C IN (CONTROLOL& SRVIC) VARIABL AUDIO OUT Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) Digital Set-top Box HDMI-DVD OUTPUT! NOT TV can receive the video and audio signal simultaneously with using a HDMI cable. If the digital set-top box supports Auto HDMI function, output resolution of the digital set-top box will be automatically set to 80x70p. If the digital set-top box does not support Auto HDMI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the digital set-top box to 80x70p. 7

30 CONNCTIONS & STUP PC STUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting with a D-sub pin cable Connect the TV to the PC with the PC cable. PC SOUND RB-PC OUTPUT PC Connect the PC audio putput to the TV s AUDIO IN ( RB) input. CONNCTIONS & STUP! Turn on the PC. Select RB [PC] input source with using the INPUT button on the remote control. NOT RB IN (PC/DTV) RMOT CONTROL IN AUDIO IN (RB) RS-C IN (CONTROL& SRVIC) HDMI IN VARIABL AUDIO OUT To enjoy vivid picture and sound, connect a PC to the set. The synchronization input form for Horizontal and Vertical frequencies is separate. Avoid keeping a fixed image on the set s screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. Connect PC to the RB INPUT(PC INPUT) port of the set; change the resolution output of PC accordingly. There might be a noise according to some resolution, vertical pattern, contrast or brightness in PC mode. Then change the PC mode into other resolution or change the refresh rate into other rate or adjust the brightness and contrast on the menu until the picture is clean. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult it to the manufacturer of the PC graphic card We recommend using 60x80, 60Hz (PCRV*, PCRV*) /60x768, 60Hz (6LCR*, 7LCR*, LCR*, LCR*, 6LCR*, LCR*, LXR*, LR*, 7LR*, LR*) /0x768, 60Hz (PCRA*) for the PC mode, they provide the best picture quality. If the resolution of PC is over SXA, there will be no picture on the set. Connect the audio cable from the PC to the Audio input on the set. (Audio cables are not included with the set). When you use too long RB-PC cable, there might be a noise on the screen. We recommend using under m of the cable. It provides the best picture quality. 8

31 Supported Display Resolution (RB[PC] mode) (6LCR*/ 7LCR*/ LCR*/ LCR*/ 6LCR*/ LCR*/ LXR*/ LR*/ 7LR*/ LR*/ PCRA*) Resolution 60x0 70x00 60x80 800x600 0x768 80x768 60x768 66x768 Horizontal Frequency(KHz) Vertical Frequency(Hz) Supported Display Resolution (RB[PC] mode) (PCRV*/ PCRV*) Resolution 60x0 70x00 60x80 88x80 8x80 800x600 0x768 Horizontal Frequency(KHz) Vertical Frequency(Hz) CONNCTIONS & STUP 9

32 CONNCTIONS & STUP TURNIN TH TV ON If your TV will be turned on, you will be able to use its features. Turing on the TV INPUT TV INPUT ARC POWR TV DVD VCR TXT PIP SIZ POSTION First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the, INPUT, PR D / button on the TV or press the POWR, TV, INPUT, PR +/-, Number(0~9) button on the remote control and then the TV will switch on. PIP PR- PIP PR+ PIP INPUT LIST I/II MNU XIT SLP CONNCTIONS & STUP Volume Adjustment Press the VOL +/- button to adjust the volume. If you want to switch the sound off, press the MUT button. You can cancel this function by pressing the MUT, VOL +/- or I/II button. Q.VIW VOL PR MUT * 0 FAV TIM RVAL INDX? Programme selection Press the PR +/- or NUMBR button to select a programme number.! NOT If you intend to be away on vacation, disconnect the power plug from wall power outlet. 0

33 On-Screen Menu Language / Country Selection Installation guide menu appears on TV screen when it is turned on for the first time. Press the D / / F / button and then, button to select your desired language. Press the D / / F / button and then, button to select your country. * If you want to change Language/ Country selection Press the MNU button and then use D / button to select the Special menu. Press the button and then use D / button to select Language. The menus can be shown on the screen in the selected language. Or, Press the button and then use D / button to select Country. Press the button and then use D / button to select your desired language or country. CONNCTIONS & STUP Press the button Press the XIT button to return to normal TV viewing.! NOT If you don t finish set up Installation uide by pressing XIT button or time out of OSD (On Screen Display) display, it will continuously appear until completing set up whenever the set is turned on. If you select wrong local country, the teletext may not appear correctly on the screen and some problem may happen during teletext operation. Arab and Hebrew are added to Country of Installation uide according to the countries which using Arab and Hebrew languages.

34 SPCIAL FUNCTIONS PIP (Picture-In-Picture) PIP lets you view different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. PIP function is available in the Component, RB, HDMI mode. (But, it can t adjust 80i/76i resolution of Component, RB, HDMI mode.) INPUT TV INPUT ARC POWR TV DVD VCR TXT PIP SIZ POSTION PIP PR- PIP PR+ PIP INPUT Watching PIP Press the PIP button to access the sub picture. ach press of PIP changes the PIP options. PIP Mode DW Mode PIP Off SPCIAL FUNTIONS Programme Selection for Sub Picture Press the PIP PR +/- button to select a programme for the sub picture. The selected programme number is displayed just below the programme number of main picture. Input Source Selection for Sub Picture Press the PIP INPUT button to select the input source for the sub picture. ach press of PIP INPUT button is pressed, each input source for the sub picture is displayed. (Sub picture can be selected only TV, AV (Video), AV, S-Video, AV, AV.) Sub Picture Size Adjustment (PIP mode only) Press the SIZ button to adjust the sub picture size. With SIZ button in PIP mode, sub picture is adjusted. Moving the Sub Picture (PIP mode only) Press the POSITION button. Repeatedly press the POSITION button then sub picture moves left.

35 TLTXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPL, TOP and FASTXT systems. SIMPL (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTXT are more modern methods allowing quick and easy selection of teletext information. Switch on/off Press the TXT button to switch to teletext. The initial page or last page appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the TXT or XIT button to switch off teletext. The previous mode reappears. SIMPL Text A Page selection nter the desired page number as a three digit number with the NUMBR buttons. If during selection you press a wrong number, you must complete the three digit number and then re-enter the correct page number. The PR+/- button can be used to select the preceding or following page. SPCIAL FUNTIONS

36 SPCIAL FUNCTIONS TLTXT TOP Text The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. A Block / group / page selection With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the PR+ button can be used. The red button permits to return to previous selection. Alternatively the PR- button can be used. A Direct page selection Corresponding to the SIMPL teletext mode, you can select a page by entering it as a three digit number using the NUMBR buttons in TOP mode. SPCIAL FUNTIONS FASTXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. A Page selection Press the i button to select the index page. You can select the pages which are colour coded along the bottom line with the same coloured buttons. Corresponding to the SIMPL teletext mode, you can select a page by entering its three digit page number with the NUMBR buttons in FASTXT mode. The PR+/- button can be used to select the preceding or following page.

37 Special Teletext Functions? A RVAL Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the display. A SIZ Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. A UPDAT Displays the TV picture on the screen while waiting for the new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then display will change to the page number. Press this button to view the updated teletext page. SPCIAL FUNTIONS A TIM When viewing a TV programme, press this button to display the time at the top right hand corner of the screen. Press this button again to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RD/RN, PR+/- or NUMBR buttons. Press again to exit this function. A HOLD Stops the automatic page change which will occur if a teletext page consists of or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inhibited. To continue press this button again.

38 TV MNU ON SCRN MNUS SLCTION AND ADJUSTMNT Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. The OSD mainly use pictures for the PCRV*, PCRV*, PCRA*. Press the M N U button and then D / button to display each menu. Press the button and then D / button to select a menu item. Change the setting of an item in the sub or pull-down menu with F / button. You can move to the higher level menu by pressing the O K or M N U button. Station Picture Sound Auto programme Manual programme Programme edit Favourite programme PSM CSM SSM AVL Balance Speaker Advanced Reset Station menu 0 Sound menu Picture menu TV MNU * PCRV*, PCRV*, PCRA* only * This menu differ with the model. Screen Special Time Auto config. Manual config. VA Mode ARC Reset Language Country Child lock ISM Method Low Power Set ID Demo Clock Off time On time Auto sleep Screen menu Special menu Time menu! NOT a. The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides graphical presentation. b. In this manual, the OSD (On Screen Display) may be different from your TV s because it is just example to help the TV operation. c. In the teletext mode, menus are not displayed 6

39 Setting up TV stations AUTO PRORAMM TUNIN TXT PIP PIP PR- Up to 00 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the PR +/-. or NUMBR buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. SIZ POSTION PIP PR+ LIST PIP INPUT MNU XIT I/II SLP All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. Q.VIW VOL Press the M N U button and then D / Station menu. button to select the Press the button and then D / programme. button to select Auto Press the button and then D / button to select System. Press the D / button to select a TV system menu; B : PAL B/, SCAM B/ (urope / ast urope / Asia / New Zealand / M.ast / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SCAM D/K (ast urope / China / Africa / CIS) L : SCAM L/L (France) M : (USA / Korea / Philippines) (option) PR Station Auto programme Manual programme Programme edit Favourite programme Press the D / 6 Press the F / button or NUMBR buttons to select the beginning programme number. If you use NUMBR buttons, any number under 0 is entered with a numeric 0 in front of it, 0 for. i.e. 0 button to select Storage Station Auto programme Manual programme Programme edit Favourite programme To set from. 7 Press the D / 8 Press the button to begin auto programming. All receivable stations are stored. The station name is stored for stations which broadcast VPS (Video Programme Service), PDC (Programme Delivery Control) or TLTXT data. If no station name can be assigned to a station, the channel number is assigned and stored as C (V/UHF 0-69) or S (Cable 0-7), followed by a number. button to select Search. To stop auto programming, press the M N U button. When auto programming is completed, the Programme edit menu appears on the screen. See the Programme edit section to edit the stored programme. 9 TV MNU Press the X I T button to return to normal TV viewing. Auto programme System Storage from Search B I DK L 6 7 Auto programme C 0 B MNU % Stop 8 7

40 TV MNU Setting up TV stations MANUAL PRORAMM TUNIN TXT PIP PR- PIP SIZ POSTION PIP PR+ PIP INPUT Manual programme lets you manually tune and arrange the stations in whatever order you desire. LIST MNU XIT I/II SLP Press the M N U button and then D / Station menu. Press the button and then D / button to select the Q.VIW VOL button to select Manual MUT programme. 6 Press the button and then D / 6 Station Auto programme Manual programme Programme edit Favourite programme button to select System. TV MNU Press the D / button to select a TV system menu; B : PAL B/, SCAM B/ (urope / ast urope / Asia / New Zealand / M.ast / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SCAM D/K (ast urope / China / Africa / CIS) L : SCAM L/L (France) M : (USA / Korea / Philippines) (option) 7 8 Press the D / button to select Band. Press the D / 9 Press the D / button to select Channel. 0 You can select the desired programme number with the F / button or number buttons. If possible, select the programme number directly with the number buttons. Any number under 0 0 for. is entered with a numeric 0 in front of it, i.e. 0 Station Auto programme Manual programme Programme edit Favourite programme To set button to select V/UHF or Cable. 8 button to select Storage. Press the F / button or NUMBR buttons to select the desired programme number (0 to 99). If you use NUMBR buttons, any number under 0 is entered with a numeric 0 in 0 for. front of it, i.e. 0 Press the D / PR Manual programme Press the D / Press the F / button to commence searching. If a station is found the search will stop. Storage System Band Channel Fine Search Name Press the O K button to store it. To store another station, repeat steps to. Press the X I T button to return to normal TV viewing. button to select Search

41 FIN TUNIN ARC Normally fine tuning is only necessary if reception is poor. VCR TXT PIP PR- PIP SIZ POSTION PIP PR+ LIST PIP INPUT MNU XIT I/II SLP Press the M N U button and then D / Station menu. button to select the Q.VIW VOL Press the button and then D / programme. button to select Manual Press the button and then D / Press the F / and sound. Press the O K button to store it. 6 Press the X I T button to return to normal TV viewing. MUT button to select Fine. PR 6 Station Auto programme Manual programme Programme edit Favourite programme button to to fine tune for the best picture Station Auto programme Manual programme Programme edit Favourite programme TV MNU To set Manual programme Storage System Band Channel Fine Search Name F / 9

42 TV MNU Setting up TV stations ASSININ A STATION NAM ARC You can assign a station name with five characters to each programme number. VCR TXT PIP PIP PR- SIZ POSTION PIP PR+ LIST PIP INPUT MNU XIT I/II SLP Press the M N U button and then D / Station menu. button to select the Q.VIW VOL Press the button and then D / programme. Press the button and then D / PR button to select Manual MUT button to select Name. Press the button and then D / button. You can use a blank, +, -, the number 0 to 9 and the alphabet A to Z. Press the F / button to select the position and make your choice of the second character, and so on. 6 Station Auto programme Manual programme Programme edit Favourite programme TV MNU 6 Press the O K button to store it. 7 Press the X I T button to return to normal TV viewing. Station Auto programme Manual programme Programme edit Favourite programme To set Manual programme Storage System Band Channel Fine Search Name C 0 6 0

43 PRORAMM DIT ARC This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. VCR TXT PIP PR- PIP SIZ POSTION PIP PR+ LIST PIP INPUT MNU I/II XIT SLP Q.VIW Press the M N U button and then D / Station menu. VOL button to select the PR MUT Press the button and then D / Programme edit. Station Auto programme Manual programme Programme edit Favourite programme Press the button to display the Programme edit menu. Station Auto programme Manual programme Programme edit Favourite programme TV MNU Deleting a programme.select a programme to be deleted with the D / / F / button..press the RD button twice. The selected programme is deleted, all the following programmes are shifted up one position. A Copying a programme.select a programme to be copied with the D / / F / button..press the RN button. All the following programmes are shifted down one position. A Moving a programme.select a programme to be moved with the D / / F / button..press the YLLOW button..move the programme to the desired programme number with the D / / F / button..press the YLLOW button again to release this function. A Skipping a programme number.select a programme number to be skipped with the D / / F / button..press the BLU button. The skipped programme turns to blue..press the BLU button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the D / button during normal TV viewing. If you want to select the skipped pro gramme, directly enter the programme number with the NUMBR buttons or select it in the programme edit or table menu. A button to select To set Programme edit 0 C 0 BLN 0 C S 66 S 67 Delete Move S S S C C Copy Skip Press the X I T button to return to normal TV viewing.

44 TV MNU Setting up TV stations FAVOURIT PRORAMM This function lets you select your favourite programmes directly. LIST MNU I/II XIT SLP Repeatedly press the F A V button to select stored favourite programmes. Q.VIW VOL Press the M N U button and then D / the Station menu. Press the button and then D / Favourite programme. button to select Press the button. Press the D / Select a desired programme with the F / button or NUMBR buttons. Any number under 0 is entered with a 0 for. numeric 0 in front of it, i.e. 0 6 To store another programme, repeat steps to. You can store up to 8 programmes. TV MNU 7 MUT button to select PR * 0 FAV TIM RVAL? button to select INDX Station Auto programme Manual programme Programme edit Favourite programme Press the X I T button to return to normal TV viewing. Station Auto programme Manual programme Programme edit Favourite programme

45 CALLIN TH PRORAMM TABL You can check the programmes stored in the memory by displaying the programme table. TXT PIP SIZ POSTION PIP PR- PIP PR+ PIP INPUT XIT LIST MNU I/II SLP A Displaying programme table Press the LIST button to display the Programme table menu. The programme table appears on the screen. One programme table contains ten programmes as shown.! NOT a. You may find some blue programmes. They have been set up to be skipped by auto programming or in the programme edit mode. b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned. Q.VIW VOL PR MUT 6 Programme List 0 C 0 S 69 BLN 0 6 S 7 C 7 S S 66 8 C 09 S 67 9 C A Selecting a programme in the programme table Select a programme with the D / / F / button. Then press the button. The set switches to the chosen programme number. F D TV MNU A Paging through a programme table There are 0 programme table pages in which contain 00 programmes. Pressing the D / / F / button repeatedly turns the pages. Press the LIST button to return to normal TV viewing.

46 TV MNU Picture Menu Options PSM (Picture Status Memory) Dynamic Standard Mild Select this option to display with a sharp image. The most general and natural screen display status. Select this option to display with a mild image. User / Select this option to use the user-defined setting. TXT PIP PIP PR- SIZ POSTION PIP PR+ LIST PIP INPUT MNU XIT I/II SLP Q.VIW VOL PR MUT Press the M N U button and then D / the Picture menu. 6 button to select Picture PSM CSM TV MNU Press the button and then D / Press the button and then D / button to select Dynamic, Standard, Mild, User, or User. button to select PSM. Press the X I T button to return to normal TV viewing. PSM adjusts the TV for the best picture appearance. Select the preset value in the PSM menu based on the programme category. A D y n a m i c, S t a n d a r d and M i l d, are programmed for optimum picture reproduction at the factory and cannot be changed. A Advanced Reset Picture PSM CSM Advanced Reset Dynamic Standard Mild User User

47 Picture Adjustment (PSM-User option) Contrast Brightness Colour Sharpness Tint TXT Adjusts the difference between the light and dark levels in the picture. Increases or decreases amount of white in the your picture. Adjusts intensity of all colours. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Adjusts the balance between red and green levels. PIP PR- PIP SIZ POSTION PIP PR+ LIST PIP INPUT MNU I/II XIT SLP Q.VIW VOL PR Picture Press the M N U button and then D / the Picture menu. PSM CSM button to select Advanced Reset Press the button and then D / button to select PSM. Press the button and then D /, or User. button to select User Press the button and then D / button to select the desired picture option (Contrast, Brightness, Colour, Sharpness, and Tint). Picture PSM CSM Dynamic Standard Mild User User Advanced Reset Press the F / 6 Press the X I T button to return to normal TV viewing. TV MNU button to make appropriate adjustments. User! NOT You can t adjust colour, sharpness and tint in the RBPC mode to the levels you prefer. Contrast Brightness Colour Sharpness Tint Contrast 8 F

48 TV MNU Picture Menu Options CSM (Colour Status Memory) TXT To initialize values (reset to default settings), select the N o r m a l option. PIP PIP PR- Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. SIZ POSTION PIP PR+ LIST PIP INPUT MNU XIT I/II SLP Q.VIW VOL PR MUT Press the M N U button and then D / the Picture menu. Press the button and then D / button Press the button and then D / button to select Picture PSM CSM to select CSM. Advanced Reset button to select either Cool, Normal, Warm, or User. Press the X I T button to return to normal TV viewing. TV MNU Picture PSM CSM Advanced Reset Cool Normal Warm User 6

49 Manual Colour Temperature Control (CSM - User option) TXT PIP PR- PIP SIZ POSTION PIP PR+ PIP INPUT To adjust red, green, blue to any colour temperature you prefer. LIST MNU XIT I/II SLP Q.VIW VOL PR MUT Press the M N U button and then D / the Picture menu. button to select Press the button and then D / button to select CSM. Press the button and then D / button to select User. Press the button and then D / button to select Picture Advanced Reset 6 Press the X I T button to return to normal TV viewing. button to make appropriate adjustments. TV MNU Press the F / PSM CSM Red, reen, or Blue. Picture PSM CSM Cool Normal Warm User Advanced Reset User Red reen Blue Red + F 7

50 TV MNU Picture Menu Options FUNCTION TXT XD is L electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. PIP PR- PIP LIST It s not available to use this function in RB-PC mode. SIZ POSTION PIP PR+ PIP INPUT MNU XIT I/II SLP Press the M N U button and then D / the Picture menu. button to select Q.VIW VOL Press the button and then D / Press the button and then D / Auto or Manual. button to select XD. PR MUT button to select 6 Picture PSM CSM Press the X I T button to return to TV viewing. Advanced Reset * Selecting the Manual This menu is activatived after selecting the User or User of P S M. TV MNU Press the button and then D / button to select X D Picture Contrast, XD Colour or XD NR. PSM CSM Press the button and then D / Advanced Reset Press the X I T button to return to normal TV viewing. button to select On or Off. A A A X D C o n t r a s t : Optimizing the contrast automatically according to the brightness of the reflection. X D C o l o u r : Adjusting the colors of the reflection automatically to reproduce as closely as possible to the natural colors. X D N R : Removing the noise up to the point where it does not damage the original picture. (It s not available to use this function in HDMI, Component (except 80i/76i), RB-PC mode.) Auto Manual Manual XD Contrast XD Colour On Off XD NR 8

51 ADVANCD-CINMA TXT PIP PR- Set up the TV for the best picture appearance for viewing movies. This feature operates only in Analog TV, AV, S-Video and Component 80i/76i mode. PIP SIZ POSTION PIP PR+ LIST PIP INPUT MNU XIT I/II SLP Q.VIW VOL PR MUT Picture Press the M N U button and then D / button to select PSM CSM the Picture menu. Advanced Reset Press the button and then D / button to select Advanced. Press the button and then D / button to select Cinema. Press the button and then D / Press the X I T button to return to normal TV viewing. TV MNU Picture button to select On or Off. PSM CSM Advanced Reset To set Advanced Cinema Black Level D F On Off MNU 9

52 ADVANCD-BLACK LVL TXT When you watch the movie, this function adjusts the set to the best picture appearance. Adjusting the contrast and the brightness of the screen using the black level of the screen. PIP PR- This function works in the following mode: AV (NTSC-M), SVideo (NTSC-M) or HDMI. PIP SIZ POSTION PIP PR+ LIST PIP INPUT MNU XIT I/II SLP Press the M N U button and then D / the Picture menu. button to select Q.VIW VOL MUT Press the button and then D / PR button to select Advanced. Picture Press the button and then D / Level. button to select Black Press the button and then D / High. button to select Low or PSM CSM Advanced Reset TV MNU A A L o w : The reflection of the screen gets darker. H i g h : The reflection of the screen gets brighter. Picture PSM CSM Press the X I T button to return to normal TV viewing. Advanced Reset To set Advanced Cinema Black Level D F Low High MNU 0

53 RST TXT PIP PR- PIP SIZ LIST PIP INPUT MNU XIT Press the M N U button and then D / the Picture menu. Press the button and then D / POSTION PIP PR+ I/II SLP button to select button to select Reset. Q.VIW VOL PR MUT Press the button to initialize the adjusted value. Returns to the default settings PSM, CSM, XD, Advanced at the factory. 6 Picture PSM CSM Advanced Reset Picture PSM CSM Advanced Reset TV MNU To set

54 TV MNU Sound Menu Options SSM (Sound Status Memory) TXT You can select your preferred sound setting; Surround MAX, Flat, Music, Movie or Sports and you can also adjust the sound frequency of the equalizer. PIP PR- SSM lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the programme content. PIP SIZ POSTION PIP PR+ LIST PIP INPUT MNU XIT I/II SLP S u r r o u n d M a x, F l a t, M u s i c, M o v i e, and S p o r t s are preset for good sound quality at the factory and are not adjustable. Q.VIW VOL PR MUT S u r r o u n d M a x Select this option to sound realistic. Flat The most commanding and natural audio. Music Select this option to enjoy the original sound when lis tening to the music. Movie Select this option to enjoy sublime sound. Sports Select this option to watch sports broadcasting. User Select this option to use the user-defined audio settings. 6 Sound SSM AVL Balance Speaker TV MNU Sound Press the M N U button and then D / the Sound menu. Press the button and then D / button to select SSM. Press the button and then D / button to select 0 button to select Surround Max, Flat, Music, Movie, Sports or User. Press the X I T button to return to normal TV viewing. SSM AVL Balance Speaker 0 Surround MAX Flat Music Movie Sports User

55 Sound Frequency Adjustment (SSM - User option) TXT PIP PIP PR- SIZ POSTION PIP PR+ PIP INPUT Adjust the sound equalizer. LIST MNU I/II XIT SLP Press the M N U button and then D / the Sound menu. button to select Q.VIW VOL PR MUT Press the button and then D / button to select SSM. Sound button to select User. SSM AVL Balance Speaker Press the button and then D / Press the button. Select a sound band by pressing the F / Make appropriate sound level with the D / 0 button. button. 6 Press the X I T button to return to normal TV viewing. Sound TV MNU SSM AVL Balance Speaker Surround MAX Flat Music Movie Sports User 0 User khz

56 TV MNU Sound Menu Options AVL (Auto Volume Leveler) TXT AVL automatically keeps on an equal volume level even if you change programmes. PIP PR- PIP SIZ POSTION PIP PR+ LIST PIP INPUT MNU XIT I/II SLP Press the M N U button and then D / button to select the Sound menu. Q.VIW VOL Press the button and then D / Press the button and then D / Press the X I T button to return to normal TV viewing. PR Sound button to select AVL. SSM AVL Balance Speaker button to select On or Off. 0 Sound TV MNU SSM AVL Balance Speaker 0 On Off

57 BALANC ADJUSTMNT TXT You can adjust the sound balance of speaker to the levels you prefer. PIP PR- PIP SIZ POSTION PIP PR+ LIST PIP INPUT MNU XIT I/II SLP Q.VIW VOL Press the M N U button and then D / button to select the Sound menu. Press the button and then D / Press the PR Sound SSM AVL Balance Speaker button to select Balance. button and then F / 0 button to make desired adjustment. Press the X I T button to return to normal TV viewing. Sound R TV MNU SSM AVL Balance Speaker

58 TV MNU Sound Menu Options SPAKR You can adjust the internal speaker status. TXT PIP PR- In AV, COMPONNT, RB[PC], RB[DTV] and HDMI mode, internal speaker audio can be outputted even though there is no video signal. PIP SIZ POSTION PIP PR+ LIST PIP INPUT MNU XIT I/II SLP If you want to use your external hi-fi stereo system, turn off the internal speakers of the set. Sound Press the M N U button and then D / the Sound menu. Press the button and then D / Press the button and then D / SSM AVL Balance Speaker button to select button to select Speaker. button to select On or Off. 0 Press the X I T button to return to normal TV viewing. Sound TV MNU SSM AVL Balance Speaker 0 On Off 6

59 STRO/DUAL RCPTION When a programme is selected, the sound information for the station appears after the programme number and station name disappear. INPUT TV POWR TV INPUT DVD ARC VCR TXT PIP SIZ POSTION PIP PR- PIP PR+ PIP INPUT DUAL I DUAL II DUAL I+II Sends the primary broadcast language to the loudspeakers. Sends the secondary broadcast language to the loudspeakers. Sends a separate language to each loudspeaker. LIST XIT MNU I/II SLP Q.VIW VOL PR Broadcast Mono Stereo Dual On Screen Display MONO STRO DUAL I A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I/II button twice. In mono reception, the depth of sound is improved. To switch back to stereo, press the I/II button twice again. A Language selection for dual language broadcast If a programme received two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly. TV MNU 7

60 TV MNU Sound Menu Options NICAM RCPTION If the set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I/II button repeatedly. When NICAM mono is received, you can select NICAM MONO or FM MONO. When NICAM stereo is received, you can select NICAM STRO or FM MONO. If the stereo signal is weak, switch to FM mono. When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or MONO. TV MNU SPAKR SOUND OUTPUT SLCTION In AV, S-Video, Component, RB and HDMI mode, you can select output sound for the left and right loudspeakers. Repeatedly press the I/II button to select the sound output. L+R: Audio signal from audio L input is sent to the left loud speaker and audio signal from audio R input is sent to the right loud speaker. L+L: Audio signal from audio L input is sent to left and right loud speakers. R+R: Audio signal from audio R input is sent to left and right loud speakers. 8

61 TV MNU Time Menu Options CLOCK STUP TXT PIP PIP PR- You must set the time correctly before using on/off time function. If current time setting is erased by a power failure or the set is unplugged, reset the clock. SIZ POSTION PIP PR+ LIST PIP INPUT MNU XIT I/II SLP Q.VIW VOL PR MUT Press the M N U button and then D / select the Time menu. button to Time Press the button and then D / button to select Clock. Press the button and then D / button to set the hour. Press the button and then D / minutes. button to set the Time Press the X I T button to return to normal TV viewing. Clock Off time On time Auto sleep -- : -- TV MNU Clock Off time On time Auto sleep 9

62 TV MNU Time Menu Options ON/OFF TIM TXT The Off time automatically switches the set to standby at the preset time. PIP PR- Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. PIP SIZ POSTION PIP PR+ LIST PIP INPUT MNU XIT I/II SLP Once the on time/off time is set, these functions operate daily at the preset time. Q.VIW Off time function overrides On timer function if they are set both to the same time. VOL PR MUT The set must be in standby mode for the On timer to work. 6 Time Press the button and then D / button to button to select TV MNU Off time/on time. Press the button and then D / button to select On. To cancel On/Off timer function, select Off. Press the button and then D / Press the button and then D / minutes Press the M N U button and then D / select the Time menu. Clock Off time On time Auto sleep Time Clock Off time On time Auto sleep -- : -Off button to set the hour. button to set the For only On timer function P r o g r a m m e: Press the button and then D / button to select the programme. V o l u m e: Press the button and then D / button to adjust volume level at turn-on. Press the X I T button to return to normal TV viewing. Time Clock Off time On time Auto sleep 07:00 PR Vol. On 8 6

63 AUTO SLP If set to on and there is no input signal, the TV turns off automatically after 0 minutes. Time Clock Off time On time Auto sleep Press the M N U button and then D / button to select the Time menu. Press the button and then D / Press the button and then D / button to select Auto sleep. button to select On or Off.. Time Clock Off time On time Auto sleep On Off Press the X I T button to return to normal TV viewing. LIST You don t have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time has elapsed. MNU XIT I/II SLP TV MNU SLP TIMR Q.VIW VOL Press the S L P button repeatedly to select the number of minutes. The display appear on the screen, followed by 0, 0, 0, 60, 90, 0, 80 and 0. PR will When the number of minutes you want is displayed on the screen, the timer begins to count down from the number of minutes selected.! NOT To view the remaining sleep time, press the S L P button once. To cancel the sleep time, repeatedly press the S L P button until the display When you switch the set off, the set releases the preset sleep time appears. 6

64 TV MNU Special Menu Options CHILD LOCK TXT The TV can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing. PIP PIP PR- This set is programmed to remember which option it was last set to even if you turn the set off. SIZ POSTION PIP PR+ LIST PIP INPUT MNU I/II XIT SLP Q.VIW VOL PR MUT Press the M N U button and then D / the Special menu. button to select 6 SPCIAL Press the button and then D / Child lock. button to select Press the button and then D / On or Off. button to select Language Country Child lock ISM Method Low Power Set ID Demo TV MNU Press the X I T button to return to normal TV viewing. SPCIAL Language Country Child lock ISM Method Low Power Set ID Demo On Off! NOT 6 In C h i l d l o c k O n, if the set is turned off, press the r / I, I N P U T, P R D / button on the set or P O W R, I N P U T, T V, P R + / - or NUMBR buttons on the remote control. With the C h i l d l o c k O n, the display Child lock on appears on the screen if any button on the front panel is pressed while viewing the set.

65 ISM (Image Sticking Minimization) MTHOD A frozen of still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the set's screen for a long period of time. TXT PIP PR- PIP SIZ LIST PIP INPUT MNU XIT It s not available to use this function in LCD models. POSTION PIP PR+ I/II SLP White wash White wash removes permanent images from the screen. N o t e : An excessive permanent image may be impossible to clear entirely with White Wash. Q.VIW VOL PR MUT Orbiter Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every minutes SPCIAL Language Country Child lock ISM Method Low Power Set ID Demo Inversion This is the function to invert the panel color of the screen. The panel color is automatically inverted every 0 minutes. TV MNU Special Press the M N U button and then D / select the Special menu. Press the button and then D / ISM Method. button to button to select Language Country Child lock ISM Method Low Power Set ID Demo Press the button and then D / button to select either Normal, White wash, Orbiter or Inversion. If you unnecessary to set this function, set Normal. Press the X I T button to return to TV viewing. Normal White wash Orbiter Inversion 6

66 TV MNU Special Menu Options LOW POWR TXT This is the function to reduce the power consumption of the set. PIP PR- PIP SIZ POSTION PIP PR+ PIP INPUT It s not available to use this function in LCD models. LIST MNU XIT I/II SLP Q.VIW VOL PR MUT Press the M N U button and then D / Press the button and then D / Press the button and then D / 6 button to select button to select Language Country Child lock ISM Method Low Power Set ID Demo On or Off. TV MNU SPCIAL Low power. button to select the Special menu. Press the X I T button to return to TV viewing. Special Language Country Child lock ISM Method Low Power Set ID Demo On Off 6

67 XD DMO TXT PIP PIP PR- Use it to see the difference between XD Demo on and XD Demo off. SIZ POSTION PIP PR+ LIST PIP INPUT MNU XIT I/II SLP It s not available to use this function in RB[PC] mode. Q.VIW Press the M N U button and then use D / VOL button to MUT select the Special menu. Press the button and then use D / PR 6 button to select SPCIAL X D D e m o. Press the button to begin X D D e m o. To stop X D D e m o, press the M N U button. Language Country Child lock ISM Method Low Power Set ID Demo TV MNU Special Language Country Child lock ISM Method Low Power Set ID Demo To start XD Demo XD Off XD On Menu xit 6