LCD TV LED LCD TV OWNER S MANUAL LED LCD TV MODELS LCD TV MODELS

Transcription

1 NGLISH LCD TV LD LCD TV OWNR S MANUAL DVB is a registered trademark of the DVB Project ID Number(s): 658 : LU50FD 6550 : 6LU50FD 650 : LH0D 65 : 6LH0D 65 : LH0D 65 : 7LH0D 65 : LH0D 655 : LH5FD 656 : 7LH5FD 657 : LH5FD 658 : LH50YD 659 : 7LH50YD 650 : LH50YD 65 : 7LH50YD 65 : 55LH50YD 655 : LH90QD 656 : 7LH90QD 6680 : 7SL80YD 6679 : SL80YD 6678 : 7SL80YD 6677 : 55SL80YD 697 : SL90QD 698 : 7SL90QD LCD TV MODLS LU5*** 6LU5*** LH*** 6LH*** LH*** 7LH*** LH*** LH*** 7LH*** LH*** LH5*** 7LH5*** LH5*** 7LH5*** 55LH5*** LH9*** 7LH9*** 7SL8*** SL8*** 7SL8*** 55SL8*** LD LCD TV MODLS SL9*** 7SL9*** Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service. (Only for Australia & New Zealand) This product qualifies for NRGY STAR in the factory default (Home Use mode) setting and this is the setting in which power savings will be achieved. Changing the factory default picture setting or enabling other features will increase power consumption that could exceed the limits necessary to qualify for nergy Star rating.

2 HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Wall Mounting Bracket(Separate purchase) RW0 RW0 AW-7LG0M AW-55LH0M (LU5***, LH***) (6LU5***, 6/LH***, LH***, LH5***) (Only /7/LH***, /7/LH***, /7//7LH5***, /7LH9***, 7//7SL8***) (55LH5***, 55SL8***) Use screws mm(+0.5/-0.5) long on the ST assembly side.(separate purchase) (Only 7//7SL8***) Set assembly side (with guide spacer) Set assembly side (without guide spacer) mm Guide spacer mm

3 POWR MARK FAV RATIO TV/RAD AV MOD POWR ON/OFF MARK FAV RATIO TV/RAD AV MOD AV MOD LIST POWR MUT NRGY SAVING Q.VIW Q.MNU INFO i GUID MARK FAV ACCSSORIS nsure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. Here shown may differ from your TV. or or or ACCSSORIS MNU RTURN / XIT Owner s Manual Batteries Power Cord This item is not included for all models. Remote Control * Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth. Polishing Cloth Polishing cloth for use on the screen. Do not use excessive force. This may cause scratching or discolouration. Only 6//7/LH***, /7/LH***, /7//7/55LH5***, /7LH9*** (xcept for 55LH5***) (Only 6LU5***, 6//7/LH***, /7/LH***, /7/LH5***, LH9***) x Bolts for stand assembly (Refer to p.) or Protection cover (Refer to p.) -screw for stand fixing (Refer to p.) Only LH*** Only /6LU5*** x x Cable management clip (Refer to p.5) Protection cover (Refer to p.) Cable Holder (Refer to p.6) (Only LU5***) (Only 6LU5***) Bolts for stand assembly (Refer to p.) Only 7//7/55SL8*** (xcept 55SL8***) x 8 Bolts for stand assembly (Refer to p.) Cable management clip (Refer to p.6) Protection Cover (Refer to p.) Cable Holder (Refer to p.6)

4 CONTNTS CONTNTS ACCSSORIS PRPARATION Front Panel Controls... Back Panel Information... 7 Stand Installation... Not Using the Desk-type Stand... Attaching the TV to a Desk... Detaching Stand... Back Cover for Wire Arrangement... 5 Kensington Security System... 6 Positioning your display...7 Swivel Stand...7 Careful installation advice... 7 Desktop Pedestal Installation... 8 Wall Mount: Horizontal Installation... 8 Antenna Connection... 9 XTRNAL QUIPMNT STUP HD Receiver Setup... 0 DVD Setup... VCR Setup... 5 Digital Audio Out Setup... 7 Other A/V Source Setup... 8 Usb Setup... 9 PC Setup Screen Setup for PC Mode... Software Update...5 Diagnostics... 5 Selecting the Programme List Favourite Programme Setup Input List Input Label Simple manual AV Mode... 6 Initializing (Reset to original factory settings)...6 TO US A BLUTOOTH Precautions when using the Bluetooth... 6 Setting the Bluetooth Set TV PIN...66 Bluetooth headset - Connecting a new Bluetooth headset Connecting to Bluetooth headset already registered Disconnecting the Bluetooth headset during use When requesting to connect to TV from the Bluetooth headset...68 Managing Registered Bluetooth device My Bluetooth Information Receiving Photos from external Bluetooth device...7 Listening to the Musics from external Bluetooth device...7 TO US A USB DVIC WATCHING TV / PROGRAMM CONTROL Remote Control Key Functions... 8 Turning on the TV... Programme Selection... Volume Adjustment... Quick Menu... 5 On-Screen Menus Selection and Adjustment... 6 Auto Programme Tuning... 7 Manual Programme Tuning (In Digital Mode)... 8 Manual Programme Tuning (In Analogue Mode)... 9 Programme dit... 5 When connecting a USB device... 7 Photo List... 7 Music List...77 Movie List...80 DivX Registration Code...8 Deactivation...85

5 PG (LCTRONIC PROGRAMM GUID) (IN DIGITAL MOD) Switch on/off PG Select a Programme Button Function in NOW/NXT Guide Mode Button Function in 8 Day Guide Mode...87 Button Function in Date Change Mode Button Function in xtended Description Box Button Function in Remind Setting Mode Button Function in Schedule List Mode MHG (MULTIMDIA AND HYPRM- DIA INFORMATION CODING XPRT GROUP) (IN DIGITAL MOD) SRS TruSurround XT...08 Balance TV Speakers On/ Off Setup...0 Selecting Digital Audio Out... Audio Reset... Stereo Reception (In Analogue Mode Only)... Speaker Sound Output Selection... Country Selection... Language Selection (In Digital Mode only)... 5 TIM STTING Clock Setup... 6 Auto On/ Off Time Setting... 7 Sleep Timer Setting... 8 CONTNTS Switch on MHG Select a Programme Button Function in Listing Mode...90 Button Function in NOW/NXT Guide Mode PICTUR CONTROL Picture Size (Aspect Ratio) Control... 9 Picture Wizard...9 nergy Saving...9 Preset Picture Settings - Picture Mode-Preset Manual Picture Adjustment - Picture Mode-User option Picture Improvement Technology xpert Picture Control Picture Reset... 0 LD Local Dimming... 0 Power Indicator...0 Demo Mode... 0 Mode Setting...0 SOUND & LANGUAG CONTROL Auto Volume Leveler Clear Voice II...06 Preset Sound Settings - Sound Mode Sound Setting Adjustment -User Mode...08 PARNTAL CONTROL / RATINGS Set Password & Lock System... 9 Block Programme... 0 Parental Control (In Digital Mode only)... xternal Input Blocking... Key Lock... TLTXT Switch on/off... SIMPL Text... TOP Text... FASTXT... 5 Special Teletext Functions... 5 APPNDIX Troubleshooting... 6 Maintenance... 8 Product Specifications... 9 IR Codes... xternal Control Device Setup... Open Source Software Notice... Open Source License...

6 PRPARATION PRPARATION FRONT PANL CONTROLS Here shown may be somewhat different from your TV. Only /6LH*** POWR CAUTION G When the TV cannot be turned on with the remote control, press the main power button on the TV. (When the power is turned off with the main power button on the TV, it will not be turned on with the remote control). G Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of glass, or the TV may fall. G Do not drag the TV. The floor or the product may be damaged. Only /6//7/LH***, /7/LH*** INPUT MNU VOLUM PROGRAMM Only /7/LH***, /7/LH*** INPUT MNU P P PROGRAMM VOLUM MNU INPUT MNU INPUT POWR Remote Control Sensor ON OFF Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on. Main Power Switch xcept for LH***

7 Here shown may be somewhat different from your TV. Only /7//7/55LH5*** P PROGRAMM VOLUM MNU INPUT MNU INPUT PRPARATION POWR Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions. Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on. OFF ON Main Power Switch Only /7LH9*** P PROGRAMM VOLUM MNU INPUT MNU INPUT SPAKR POWR Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions. Power/Standby Indicator Illuminates red in standby mode. Illuminates white when the TV is switched on. Main Power Switch 5

8 PRPARATION Here shown may be somewhat different from your TV. Only /6LU5*** Only LU5*** POWR INPUT MNU VOLUM PROGRAMM Only 6LU5*** P PROGRAMM INPUT MNU P VOLUM PRPARATION MNU INPUT MNU INPUT POWR Remote Control Sensor ON OFF Main Power Switch Power/Standby Indicator Illuminates red in standby mode. Illuminates white when the TV is switched on. Only 7//7/55SL8*** Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions. OFF ON Main Power Switch PROGRAMM VOLUM MNU INPUT POWR P MNU INPUT 6 Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on.

9 BACK PANL INFORMATION Here shown may be somewhat different from your TV. Only /6//7/LH***, /7/LH*** Only /7/LH*** USB SRVIC ONLY 0 Only /6//7/LH*** USB SRVIC ONLY 0 IN PRPARATION 7 Only /6//7/LH*** AV IN Only /7/LH*** RGB IN (PC) RS-C IN (CONTROL&SRVIC) RGB IN (PC) RS-C IN (CONTROL&SRVIC) /DVI IN OPTICAL AUDIO IN DIGITAL (RGB/DVI) AUDIO OUT VIDO L/MONO AUDIO R AV IN /DVI IN OPTICAL AUDIO IN DIGITAL (RGB/DVI) AUDIO OUT VIDO L/MONO AUDIO R AV IN (DVI) VIDO AUDIO COMPONNT IN ANTNNA IN (DVI) VIDO AUDIO COMPONNT IN ANTNNA IN Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. 6 RS-C IN (CONTROL & SRVIC) PORT Connect to the RS-C port on a PC. This port is used for Service or Hotel mode. HDMI/DVI IN Input Connect a HDMI signal to HDMI IN. Or DVI (VIDO) signal to HDMI/DVI port with DVI to HDMI cable. 7 Audio/Video Input Connect audio/video output from an external device to these jacks. RGB/DVI Audio Input Connect the audio from a PC or DTV. 8 Component Input Connect a component video/audio device to these jacks. RGB Input Connect the output from a PC. 9 Antenna Input Connect RF antenna to this jack. 5 OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable. 0 SRVIC ONLY PORT 7

10 AUDIO AUDIO R R PRPARATION Here shown may be somewhat different from your TV. Only /7//7/55LH5***, /7LH9*** R PRPARATION ANTNNA IN IN RGB IN (PC) RS-C IN (CONTROL&SRVIC) /DVI IN VIDO OPTICAL DIGITAL AUDIO IN VIDO L/MONO (RGB/DVI) AUDIO OUT L(MONO) AUDIO VARIABL AUDIO OUT R ANTNNA IN AV IN 7 (DVI) AV IN VIDO L(MONO) VIDO AUDIO COMPONNT IN VARIABL AUDIO OUT ANTNNA IN ANTNNA IN 8 9 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. HDMI/DVI IN Input Connect a HDMI signal to HDMI IN. Or DVI (VIDO) signal to HDMI/DVI port with DVI to HDMI cable. RGB/DVI Audio Input Connect the audio from a PC or DTV RS-C IN (CONTROL & SRVIC) PORT Connect to the RS-C port on a PC. This port is used for Service or Hotel mode. Audio/Video Input Connect audio/video output from an external device to these jacks. Component Input Connect a component video/audio device to these jacks. RGB IN Input Connect the output from a PC. 9 Antenna Input Connect RF antenna to this jack. 5 OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable. 0 USB IN Input Connect USB storage device to this jack. 8

11 Only 6LU5*** Here shown may be somewhat different from your TV. Only /6LU5*** IN ON OFF 7 PRPARATION Only 6LU5*** AV IN RGB IN (PC) RS-C IN (CONTROL&SRVIC) RGB IN (PC) RS-C IN (CONTROL&SRVIC) (DVI) AUDIO IN OPTICAL (RGB/DVI) DIGITAL AUDIO OUT VIDO L(MONO) AUDIO R AV IN USB IN SRVIC ONLY (DVI) AUDIO IN OPTICAL (RGB/DVI) DIGITAL AUDIO OUT VIDO L(MONO) AUDIO R AV IN USB IN SRVIC ONLY /DVI IN VIDO AUDIO COMPONNT IN ANTNNA IN /DVI IN VIDO AUDIO COMPONNT IN ANTNNA IN Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. 6 RS-C IN (CONTROL & SRVIC) PORT Connect to the RS-C port on a PC. This port is used for Service or Hotel mode. HDMI Input Connect an HDMI signal to HDMI IN. Or DVI (VIDO) signal to HDMI/DVI port with DVI to HDMI cable. 7 8 Audio/Video Input Connect audio/video output from an external device to these jacks. SRVIC ONLY PORT 5 RGB/DVI Audio Input Connect the audio from a PC or DTV. RGB IN Input Connect the output from a PC. OPTICAL DIGITAL AUDIO OUT Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work. 9 0 Component Input Connect a component video/audio device to these jacks. Antenna Input Connect RF antenna to this jack. 9

12 PRPARATION Here shown may be somewhat different from your TV. Only 7//7/55SL8*** PRPARATION L/MONO AUDIO R 7 IN 0 VIDO AV IN RGB IN (PC) (CONTROL&SRVIC) RS-C IN /DVI IN DIGITAL AUDIO OUT AUDIO IN OPTICAL (RGB/DVI) VIDO L/MONO AUDIO R AV IN (DVI) VIDO AUDIO COMPONNT IN ANTNNA IN 8 9 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. 6 RS-C IN (CONTROL & SRVIC) PORT Connect to the RS-C port on a PC. This port is used for Service or Hotel mode. HDMI/DVI IN Input Connect a HDMI signal to HDMI IN. Or DVI (VIDO) signal to HDMI/DVI port with DVI to HDMI cable. 7 Audio/Video Input Connect audio/video output from an external device to these jacks. 0 5 OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable. RGB IN Input Connect the output from a PC. RGB/DVI Audio Input Connect the audio from a PC or DTV Component Input Connect a component video/audio device to these jacks. Antenna Input Connect RF antenna to this jack. USB IN Input Connect USB storage device to this jack.

13 STAND INSTALLATION Image shown may differ from your TV When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. Only LH*** Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Only /6LU5*** Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. PRPARATION Assemble the TV as shown. Fix the or bolts securely using the holes as shown. (Only 6LU5***) Cover Base

14 PRPARATION Only 6//7/LH***, /7/LH***, /7//7LH5***, /7LH9*** PRPARATION Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the TV as shown. Image shown may differ from your TV. Only 7//7SL8*** Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the parts of the S t a n d B o d y with the S t a n d B a s e of the TV. Stand Body Stand Base Fix the bolts securely using the holes in the back of the TV. Assemble the TV as shown. Fix the bolts securely using the holes in the back of the TV.

15 NOT USING TH DSK-TYP STAND Here shown may be somewhat different from your TV. When installing the wall-mounted unit, use the protection cover. Only LH*** Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Insert the P R O T C T I O N C O V R into the TV until clicking sound. PRPARATION Only 6//7/LH***, /7/LH***, /7//7/55LH5*** Loose the bolts from TV. Only /7LH9*** After removing the protection paper from the protection cover, adhere it to the TV as shown. Detach the S t a n d B o d y from T V. Insert the P r o t e c t i o n C o v e r into the TV. Only 7//7/55SL8*** Protection Cover 5 Fix the bolts securely using the holes in the back of the TV. Insert the P R O T C T I O N C O V R into the TV until clicking sound. PROTCTION COVR

16 PRPARATION PRPARATION ATTACHING TH TV TO A DSK (Only 6//7/LH***, /7/LH***, 6LU5***, /7/LH5***, LH9***) Here shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw. DTACHING STAND Here shown may be somewhat different from your TV. Only /6LU5*** Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. -Screw (provided as parts of the product) Loose the bolts and then detach the stand from TV. Stand Desk (Only 6LU5***) Loose the bolts and then detach the Cover Base from T V.! WARNING G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury. Cover Base (Only 6LU5***) Detach the Stand Body from T V. Stand Body

17 BACK COVR FOR WIR ARRANGMNT Here shown may be somewhat different from your TV. Only LH*** Connect the cables as necessary. To connect additional equipment, see the XTRNAL QUIPMNT STUP section. Only 6//7/LH***, /7/LH***, /7//7/55LH5***, /7LH9*** Connect the cables as necessary. To connect additional equipment, see the xternal quipment Setup section of the manual. PRPARATION Install the CABL MANAGMNT CLIP as shown. Open the CABL MANAGMNT CLIP as shown and manage the cables. CABL MANAGMNT CLIP Fit the CABL MANAGMNT CLIP as shown. CABL MANAGMNT CLIP Fit the CABL MANAGMNT CLIP as shown. How to remove the CABL MANAG- MNT CLIP(Only LH***) G Hold the CABL MANAG- MNT CLIP with both hands and pull it backward.! NOT G Do not use the CABL MANAGMNT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged. 5

18 PRPARATION Only 7//7/55SL8*** FOR DSK-TYP STAND Only /6LU5*** After Connecting the cables as necessary, install CABL HOLDR as shown and bundle the cables. PRPARATION Install the CABL MANAGMNT CLIP as shown. KNSINGTON SCURITY SYSTM This feature is not available for all models. Image shown may differ from your TV. The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. For the detailed installation and use of the Kensington Security System, refer to the user s guide provided with the Kensington Security System. For further information, contact the internet homepage of the Kensington company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and LCD projectors. CABL MANAGMNT CLIP Connect the cables as necessary. To connect additional equipment, see the XTRNAL QUIPMNT STUP section. FOR WALL MOUNT NOT - The Kensington Security System is an optional accessory. After Connecting the cables as necessary, install CABL HOLDR as shown and bundle the cables. To connect additional equipment, see the xternal equipment Setup section. CABL HOLDR NOTS a. If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there is nothing wrong with TV. b. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. c. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.! NOT G Do not use the CABL MANAGMNT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged. 6

19 POSITIONING YOUR DISPLAY (Only LH***) Here shown may be somewhat different from your TV. Adjust the position of the panel in various ways for maximum comfort. Tilt range! NOT 0 G The following model is a fixed stand type model without the Tilt and Swivel features so excessive pressure may damage the set. - /6LU5*** 0 CARFUL INSTALLATION ADVIC A You should purchase necessary components to fix the TV safety and secure to the wall on the market. A Position the TV close to the wall to avoid the possibility of it falling when pushed. A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. nsure that children do not climb or hang from the TV. Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen then bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. PRPARATION SWIVL STAND (xcept for /6LU5***, LH***) After installing the TV, you can adjust the TV set manually to the left or right direction by 0 degrees to suit your viewing position. Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall. Use a sturdy rope to tie the product for alignmen. It is safer to tie the rope so it becomes horizontal between the wall and the product.! NOT G When moving the TV undo the cords first. G Use a platform or cabinet strong and large enough to support the size and weight of the TV. G To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same. 7

20 PRPARATION PRPARATION DSKTOP PDSTAL INSTALLATION For adequate ventilation allow a clearance of (0cm) all around the TV. inches inches inches inches A The TV can be installed in various ways such as on a wall, or on a desktop etc. A The TV is designed to be mounted horizontally. ARTHING nsure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes. Power Supply! NOT G Should Install wall mount on a solid wall perpendicular to the floor. G Should use a special wall mount, if you want to install it to ceiling or slanted wall. G The surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set; e.g. concrete, natural rock, brick and hollow block. G Installing screw type and length depends on the wall mount used. Further information, refer to the instructions included with the mount. G LG is not liable for any accidents or damage to property or TV due to incorrect installation: - Where a non-compliant VSA wall mount is used. - Incorrect fastening of screws to surface which may cause TV to fall and cause personal injury. - Not following the recommended Installation method. Model LU5*** 6LU5*** B A VSA (A * B) 00 * * 00 Standard Screw M M Quantity Circuit breaker WALL MOUNT: HORIZONTAL INSTALLATION A We recommend the use of a LG Brand wall mounting bracket when mounting the TV to a wall. A We recommend that you purchase a wall mounting bracket which supports VSA standard. A LG recommends that wall mounting be performed by a qualified professional installer. inches inches inches inches LH*** 6LH*** LH*** 7LH*** LH*** LH*** 7LH*** LH*** LH5*** 7LH5*** LH5*** 7LH5*** 55LH5*** LH9*** 7LH9*** 00 * * * * * * * * * * * * * * * 00 M M M M6 M6 M M6 M6 M M6 M6 M6 M6 M6 M6 inches 7SL8*** SL8*** 7SL8*** 55SL8*** 00 * * * * 00 M6 M6 M6 M6 8 SL9*** 7SL9*** 00 * * 00 M6 M6

21 To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTNNA CONNCTION For optimum picture quality, adjust antenna direction. An antenna cable and converter are not supplied. PRPARATION Wall Antenna Socket Multi-family Dwellings/Apartments (Connect to wall antenna socket) ANTNNA IN Outdoor Antenna (VHF, UHF) RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) UHF Antenna VHF Signal Amplifier ANTNNA IN In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above. If signal needs to be split for two TVs, use an antenna signal splitter for connection. 9

22 XTRNAL QUIPMNT STUP To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. This section on XTRNAL QUIPMNT STUP mainly uses diagrams for the /7//7/55LH5*** models. Here shown may differ from your TV. HD RCIVR STUP This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below. Connecting with a component cable XTRNAL QUIPMNT STUP Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONNT IN VIDO jacks on the TV. Connect the audio output of the digital set-top box to the COMPONNT IN AUDIO jacks on the TV. Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) Select Component input source using the INPUT button on the remote control. If connected to COMPONNT IN, select Component input source. VIDO AUDIO COMPONNT IN G HDMI Audio Supported format : Dolby Digital, PCM Signal Component HDMI 80i/576i 80p/576p 70p/080i 080p O O O O (50Hz/60Hz) X O O O (Hz/0Hz/50Hz/60Hz) 0

23 Connecting a set-top box with an HDMI cable Connect the digital set-top box to HDMI/DVI IN, HDMI IN, HDMI IN (xcept for /6//7/LH***, LU5***) or HDMI IN (Only /7//7/55LH5***, /7LH9***, 7//7/55SL8***) jack on the TV. Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) Select HDMI, HDMI, HDMI(xcept for /6//7/LH***, LU5***) or HDMI(Only /7//7/55LH5***, /7LH9***, 7//7/55SL8***) input source using the INPUT button on the remote control. (DVI) /DVI IN AUDIO IN (RGB/DVI) OPTICA AUDIO Y PB PR VIDO COMPON XTRNAL QUIPMNT STUP! NOT G Check that your HDMI cable is version. or higher. If the HDMI cables don t support HDMI version., flickering or no screen display can result. Please use the latest cables that support at least HDMI version..

24 XTRNAL QUIPMNT STUP Connecting with an HDMI to DVI cable AUDIO IN OPTICAL DIG XTRNAL QUIPMNT STUP Connect the digital set-top box to HDMI/DVI IN jack on the TV. Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the TV. Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) Select HDMI input source using the INPUT button on the remote control. (DVI) /DVI IN (RGB/DVI) AUDIO OU Y PB PR VIDO COMPONN

25 DVD STUP Connecting with a component cable Connect the video outputs (Y, PB, PR) of the DVD to the COMPONNT IN VIDO jacks on the TV. 5 Connect the audio outputs of the DVD to the COMPONNT IN AUDIO jacks on the TV. Turn on the DVD player, insert a DVD. Select Component input source using the INPUT button on the remote control. If connected to COMPONNT IN, select Component input source. Refer to the DVD player's manual for operating instructions. VIDO AUDIO COMPONNT IN XTRNAL QUIPMNT STUP Component Input ports To achieve better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Y PB PR Y PB PR Video output ports on DVD player Y Y B-Y Cb R-Y Cr Y Pb Pr

26 XTRNAL QUIPMNT STUP Connecting the HDMI cable XTRNAL QUIPMNT STUP Connect the HDMI output of the DVD to the HDMI/DVI IN, HDMI IN, HDMI IN (xcept for /6//7/LH***, LU5***) or HDMI IN (Only /7//7/55LH5***, /7LH9***, 7//7/55SL8***) jack on the TV. Select HDMI, HDMI, HDMI(xcept for /6//7/LH***, LU5***) or HDMI(Only /7//7/55LH5***, /7LH9***, 7//7/55SL8***) input source using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. (DVI) /DVI IN AUDIO IN (RGB/DVI) OPTICAL D AUDIO O Y PB PR VIDO COMPON! NOT G The TV can receive video and audio signals simultaneously when using an HDMI cable. G If the DVD does not support Auto HDMI, you must set the output resolution appropriately. G The TV set can process audio format of PCM or Dolby Digital, when connect the external equipment using an HDMI cable. G Check that your HDMI cable is version. or higher. If the HDMI cables don t support HDMI version., flickering or no screen display can result. Please use the latest cables that support at least HDMI version..

27 VCR STUP To avoid picture noise (interference), allow adequate distance between the VCR and TV. Connecting with a RF Cable PR L O MPONNT IN AUDIO R ANTNNA IN ANT OUT ANT IN S-VIDO OUTPUT SWITCH Wall Jack VIDO L R XTRNAL QUIPMNT STUP Antenna Connect the ANT OUT socket of the VCR to the ANTNNA IN socket on the TV. Connect the antenna cable to the ANT IN socket of the VCR. Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing. 5

28 XTRNAL QUIPMNT STUP Connecting with a RCA cable Connect the AUDIO/VIDO jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red) XTRNAL QUIPMNT STUP! Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.) Select AV input source using the INPUT button on the remote control. If connected to AV input, select AV input source. NOT G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT VIDO L/MONO AUDIO R AV IN Y PB PR L R VIDO COMPONNT IN AUDIO ANTNNA IN or AV IN S-VIDO VIDO L R ANT IN S-VIDO VIDO L R ANT IN OUTPUT SWITCH ANT OUT OUTPUT SWITCH ANT OUT 6

29 DIGITAL AUDIO OUT STUP Sending the TV s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. Connect the other end of the optical cable to the digital audio (Optical) input on the audio equipment. Set the TV Speaker option - Off in the AUDIO menu.( G p.0) Refer to the external audio equipment instruction manual for operation. CAUTION GDo not look into the optical output port. Looking at the laser beam may damage your vision. AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT VIDO /MONO AUDIO Y PB PR L R VIDO AUDIO COMPONNT IN AV IN ANT XTRNAL QUIPMNT STUP! NOT G When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. 7

30 XTRNAL QUIPMNT STUP OTHR A/V SOURC STUP Camcorder Video Game Set RS-C IN (CONTROL & SRVIC) AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT VIDO L/MONO AUDIO R AV IN VIDO L R XTRNAL QUIPMNT STUP Y PB PR L R VIDO AUDIO COMPONNT IN ANTNNA IN or Camcorder Video Game Set VIDO L R IN AV IN Connect the AUDIO/VIDO jacks between TV and external equipment. Match the jack colours. (Video = yellow, Audio Left = white, and Audio Right = red) Select AV input source with using the INPUT button on the remote control. If connected to AV input, select AV input source. Operate the corresponding external equipment. Refer to external equipment operating guide. 8

31 USB STUP (xcept for /6//7/LH***, /7/LH***, /6LU5***) IN Connect the USB device to the USB IN jacks on the TV. XTRNAL QUIPMNT STUP After connecting the USB IN jacks, you use the USB function. ( G p.7) 9

32 XTRNAL QUIPMNT STUP PC STUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. Connecting with a D-sub 5 pin cable XTRNAL QUIPMNT STUP Connect the RGB output of the PC to the RGB IN (PC) jack on the TV. Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. Turn on the PC and the TV. Select RGB input source using the INPUT button on the remote control. DVI IN AUDIO IN OPTICAL DIGITAL (RGB/DVI) RGB IN (PC) AUDIO OUT VIDO COMPONNT IN RS-C IN (CONTROL & SRVIC) VIDO /MONO AUDIO Y PB PR L R AUDIO AV IN A AUDIO RGB OUTPUT 0

33 Connecting with a HDMI to DVI cable Connect the DVI output of the PC to the HDMI/DVI IN jack on the TV. Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. Turn on the PC and the TV. Select HDMI input source using the INPUT button on the remote control. (DVI) /DVI IN AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT Y PB PR VID VIDO COMPONN XTRNAL QUIPMNT STUP DVI-PC OUTPUT AUDIO

34 XTRNAL QUIPMNT STUP Supported Display Resolution RGB-PC, HDMI/DVI-PC mode HDMI/DVI-DTV mode Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) XTRNAL QUIPMNT STUP 70x00 60x80 800x600 0x768 80x768 60x768 80x0 90x080 (RGB-PC) 90x080 (HDMI-PC) x80 70x576 80x70 90x080.69/ /5.7/ /7.76/ / / / / / 9.976/ /60 xcept for /6//7/LH***

35 ! NOT G Avoid keeping a fixed image on the set s screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. G There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. G The synchronization input waveform for Horizontal and Vertical frequencies are separate. G Connect the signal cable from the monitor output port of the PC to the RGB (PC) port of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV. G Connect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV). G If using a sound card, adjust PC sound as required. G If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC output on the TV. G If graphic card on the PC does output analogue and digital RGB simultaneously, set the TV to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the TV.) G DOS mode may not work depending on the video card if you use a HDMI to DVI cable. G If you use too long an RGB-PC cable, there may be interference on the screen. We recommend using under 5m of cable. This provides the best picture quality. G When an unsupported resolution or graphic card is used on the PC, it may cause some errors. G We recommend using 90x080, 60Hz(only /6//7/LH*** : 60x768, 60Hz) for the PC mode, this should provide the best picture quality. XTRNAL QUIPMNT STUP

36 XTRNAL QUIPMNT STUP Screen Setup for PC mode Screen Reset Returns Position, Size and Phase to the factory default settings. This function works in the following mode : RGB[PC]. XTRNAL QUIPMNT STUP PICTUR Screen Screen Contrast 90 Move Brightness 50 Sharpness 70 Colour 60 Tint 0 R Advanced Control Picture Reset G SCRN Move Prev. Resolution Auto Config. Position To Set Size Phase Reset Yes No MNU Select PICTUR. Select Screen. 5 Run Reset. Select Reset. Select Yes. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen.

37 Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This function works in the following mode : RGB[PC]. PICTUR Screen Screen Contrast 90 Move Brightness 50 Sharpness 70 Colour 60 Tint 0 R Advanced Control Picture Reset G SCRN Move Prev. Resolution Auto Config. Position Size Phase Reset XTRNAL QUIPMNT STUP MNU Select PICTUR. Select Screen. Select Position, Size or Phase. Make appropriate adjustments. 5 Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 5

38 XTRNAL QUIPMNT STUP Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] XTRNAL QUIPMNT STUP PICTUR Screen Screen Contrast 90 Move Brightness 50 Sharpness 70 Colour 60 Tint 0 R Advanced Control Picture Reset G SCRN Move Prev. Resolution Auto Config. 0 x x x 768 Position Size Phase Reset MNU Select PICTUR. Select Screen. Select Resolution. Select the desired resolution. 5 Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 6

39 Auto Configure (RGB [PC] mode only) Automatically adjusts the picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. Auto configure This function is for automatic adjustment of the screen position, size, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress. PICTUR Screen Screen Move Contrast 90 Brightness 50 Sharpness 70 Colour 60 Tint 0 R Advanced Control Picture Reset G SCRN Move Prev. Resolution Auto Config. Position Size Phase Reset Yes To Set No XTRNAL QUIPMNT STUP MNU Select PICTUR. Select Screen. Select Auto Config.. If the position of the image is still not correct, try Auto adjustment again. If picture needs to be adjusted again after Auto adjustment in RGB (PC), you can adjust the Position, Size or Phase. 5 Select Yes. Run Auto Config.. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 7

40 WATCHING TV / PROGRAMM CONTROL RMOT CONTROL KY FUNCTIONS (Only /7//7/55LH5***) When using the remote control, aim it at the remote control sensor on the TV. NRGY SAVING RATIO POWR INPUT Adjust the nergy Saving mode of the TV. Selects your desired Aspect Ratio of picture.(g p. 9) Switches the TV on from standby or off to standby. xternal input mode rotate in regular sequence.(g p. 57) WATCHING TV / PROGRAMM CONTROL TV/RAD Q. MNU MNU GUID THUMBSTICK (Up/Down/Left/ Right) Selects Radio, TV and DTV channel. Select the desired quick menu source. (Aspect Ratio, Clear Voice II, Picture Mode, Sound Mode, Audio, Sleep Timer, Favourite, USB Device).(G p. 5) Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu. Shows programme schedule.(g p. 86) Allows you to navigate the on-screen menus and adjust the system settings to your preference. Accepts your selection or displays the current mode. RTURN(XIT) INFO i AV MOD Allows the user to move return one step in an interactive application, PG or other user interaction function. Shows the present screen information. It helps you select and set images and sounds when connecting AV devices.(g p. 6) Coloured buttons These buttons are used for teletext (on TLTXT models only), Programme edit. TLTXT BUTTONS These buttons are used for teletext. For further details, see the Teletext section.(g p. ) SUBTITL Recalls your preferred subtitle in digital mode. 8 See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.(g p. 60)

41 VOLUM UP /DOWN MARK FAV MUT Adjusts the volume. Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. Displays the selected favourite programme.(g p. 56) Switches the sound on or off. Programme UP/DOWN PAG UP/DOWN 0~9 number button LIST Q.VIW SIMPLINK / USB Menu control buttons Selects a programme. Move from one full set of screen information to the next one. Selects a programme. Selects numbered items in a menu. Displays the programme List.(G p. 55) Returns to the previously viewed programme. Controls SIMPLINK or USB menu(photo List and Music List or Movie List. WATCHING TV / PROGRAMM CONTROL Installing Batteries Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). Install two.5v AAA batteries. Do not mix old or used batteries with new ones. Close cover. 9

42 WATCHING TV / PROGRAMM CONTROL RMOT CONTROL KY FUNCTIONS (Only /6//7/LH***, /7/LH***, /6LU5***) When using the remote control, aim it at the remote control sensor on the TV. TV/RAD AV MOD Selects Radio, TV and DTV channel. It helps you select and set images and sounds when connecting AV devices.(g p. 6) POWR POWR Switches the TV on from standby or off to standby. WATCHING TV / PROGRAMM CONTROL AV MOD LIST MUT NRGY SAVING Q.VIW INPUT NRGY SAVING 0~9 number button Q.VIW LIST THUMBSTICK (Up/Down/Left/Right) MNU xternal input mode rotate in regular sequence.(g p. 57) Adjust the nergy Saving mode of the TV. Selects a programme. Selects numbered items in a menu. Returns to the previously viewed programme. Displays the programme List.(G p. 55) Allows you to navigate the on-screen menus and adjust the system settings to your preference. Accepts your selection or displays the current mode. Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu. RTURN(XIT) Allows the user to move return one step in an interactive application, PG or other user interaction function. MNU RTURN / XIT Coloured buttons These buttons are used for teletext (on TLTXT models only), Programme edit. Q.MNU INFO i GUID MARK FAV TLTXT BUTTONS These buttons are used for teletext. For further details, see the Teletext section.(g p. ) SUBTITL Recalls your preferred subtitle in digital mode. See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.(g p. 60) 0

43 VOLUM UP /DOWN Adjusts the volume. MUT Switches the sound on or off. AV MOD POWR NRGY SAVING Programme UP/DOWN Selects a programme. LIST MUT Q.VIW PAG UP/DOWN SIMPLINK control buttons Q. MNU INFO i GUID Move from one full set of screen information to the next one. Controls SIMPLINK. Select the desired quick menu source. (Aspect Ratio, Clear Voice II, Picture Mode, Sound Mode, Audio, Sleep Timer, Favourite, nergy Saving.)(G p. 5) Shows the present screen information. Shows programme schedule.(g p. 86) WATCHING TV / PROGRAMM CONTROL FAV MARK Displays the selected favourite programme.(g p. 56) Select the input to apply the Picture Wizard settings. MNU RTURN / XIT Installing Batteries Q.MNU INFO i GUID MARK FAV Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). Install two.5v AAA batteries. Do not mix old or used batteries with new ones. Close cover.

44 WATCHING TV / PROGRAMM CONTROL RMOT CONTROL KY FUNCTIONS (Only /7LH9***, 7//7/55SL8***) When using the remote control, aim it at the remote control sensor on the TV. POWR TV/RAD POWR Switches the TV on from standby or off to standby. WATCHING TV / PROGRAMM CONTROL POWR ON/OFF MARK FAV TV/RAD ON/OFF TV/RAD NRGY SAVING INFO i INPUT 0~9 number button LIST Q.VIW MNU Q. MNU Key lighting on or off.(only /7LH9***) Selects Radio, TV and DTV channel. Adjust the nergy Saving mode of the TV. Shows the present screen information. xternal input mode rotate in regular sequence.(g p. 57) Selects a programme. Selects numbered items in a menu. Displays the programme List.(G p. 55) Returns to the previously viewed programme. Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu. Select the desired quick menu source. (Aspect Ratio, Clear Voice II, Picture Mode, Sound Mode, Audio, Sleep Timer, Favourite, USB Device).(G p. 5) THUMBSTICK (Up/Down/Left/Right) Allows you to navigate the on-screen menus and adjust the system settings to your preference. GUID RTURN(XIT) Accepts your selection or displays the current mode. Shows programme schedule.(g p. 86) Allows the user to move return one step in an interactive application, PG or other user interaction function. Coloured buttons These buttons are used for teletext (on TLTXT models only), Programme edit. RATIO AV MOD TLTXT BUTTONS SUBTITL These buttons are used for teletext. For further details, see the Teletext section.(g p. ) Recalls your preferred subtitle in digital mode.

45 POWR ON/OFF VOLUM UP /DOWN Adjusts the volume. TV/RAD FAV MARK Displays the selected favourite programme.(g p. 56) Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. MARK FAV MUT Programme UP/DOWN PAG UP/DOWN SIMPLINK / USB Menu control buttons RATIO Switches the sound on or off. Selects a programme. Move from one full set of screen information to the next one. Controls SIMPLINK or USB menu(photo List and Music List or Movie List. See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.(g p. 60) Selects your desired Aspect Ratio of picture.(g p. 9) WATCHING TV / PROGRAMM CONTROL AV MOD It helps you select and set images and sounds when connecting AV devices.(g p. 6) Installing Batteries RATIO AV MOD Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). Install two.5v AAA batteries. Do not mix old or used batteries with new ones. Close cover.

46 WATCHING TV / PROGRAMM CONTROL TURNING ON TH TV - When your TV is turned on, you will be able to use its features. Firstly, connect the power cord correctly and check the main power on the TV. At this stage, the TV switches to standby mode. In standby mode to turn TV on, press the r / I, INPUT or P D (or P ) button on the TV or press the POWR, INPUT, P or NUMBR button on the remote control and the TV will switch on. WATCHING TV / PROGRAMM CONTROL Initializing setup If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the Mode Setting, Country(Only Australia & New Zealand), Time Zone(Only Australia), Auto Tuning. Note: a. If you close without completing the initial setting, the Initial Setting menu can be displayed again. b. For those countries without confirmed DTV broadcasting standards, some DTV features might not work, depending on the DTV broadcasting environment. c. "Home Use mode is the optimal setting for home environments, and is the TV's default mode. d. "Store Demo" mode is the optimal setting for store environments. If a user modifies image quality data, Store Demo mode initializes the product to the image quality set by us after a certain period of time. e. The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the OPTION menu. PROGRAMM SLCTION Press the P number. or NUMBR buttons to select a programme VOLUM ADJUSTMNT Press the + or - button to adjust the volume. If you wish to switch the sound off, press the MUT button. You can cancel this function by pressing the MUT, +, - or AV Mode button.

47 QUICK MNU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. Aspect Ratio: Selects your desired picture format. For Zoom Setting, select :9, Zoom and Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes back to Q.Menu. Clear Voice II : By differentiating the human sound range from others, it helps users listen to human voices better. Picture Mode : Selects your desired Picture Mode. Sound Mode : It is a feature to automatically set the sound combination which it deems the best for the images being watched. Selects your desired Sound Mode. F Aspect Ratio G 6:9 Audio : Selects the sound output. Sleep Timer : Sets the sleep timer. Favourite : Selects the favourite programme. USB Device : Selects ject in order to eject USB device.(xcept for /6//7/LH***, /7/LH***, /6LU5***) nergy Saving : Selects your desired nergy Saving mode. (Only/6//7/LH***, /7/LH***, /6LU5***) F Aspect Ratio G 6:9 WATCHING TV / PROGRAMM CONTROL xcept for /6//7/LH***, /7/LH***, /6LU5*** Only /6//7/LH***, /7/LH***, /6LU5*** Q. MNU Display each menu. Select your desired Source. Press the Q.MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 5

48 WATCHING TV / PROGRAMM CONTROL ON SCRN MNUS SLCTION AND ADJUSTMNT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. A Here shown may differ from your TV. STUP Move PICTUR Move AUDIO Move WATCHING TV / PROGRAMM CONTROL Auto Tuning Manual Tuning Programme dit Software Update : On Diagnostics OPTION Move Audio Language : nglish Subtitle Language : nglish Hard of Hearing( ) : Off Country : Australia Input Label SIMPLINK : On Key Lock : Off Simple Manual Move Lock System : Off Set Password Block Programme Parental Guidance : Blocking Off LOCK Input Block Aspect Ratio : 6:9 Picture Wizard nergy Saving : Off Picture Mode : Standard Backlight 70 Contrast 90 Brightness 50 Sharpness 70 STUP PICTUR AUDIO TIM OPTION LOCK BLUTOOTH INPUT BLUTOOTH Move INPUT Bluetooth : Off Antenna TV PIN : 0000 AV Bluetooth Headset : Disconnected AV Registered Bluetooth Device Component My Bluetooth Info. Component RGB HDMI HDMI or Auto Volume : Off Clear Voice II : Off Level - + Balance 0 L R Sound Mode : Standard SRS TruSurround XT : Off Treble 50 Bass 50 TIM Move Clock Off Time : Off On Time : Off Sleep Timer : Off USB Move USB Move Photo List Music List Movie List DivX Reg. Code Deactivation (Only /7LH9***, 7//7/55SL8***) (Only /7//7/55LH5***) (Only /7//7/55LH5***, /7LH9***, 7//7/55SL8***) MNU Display each menu. Select a menu item. Move to the pop up menu. Press the INFO button, you can check the Simple Manual Menu. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 6! NOT G It is possible to use Country in Australia and New Zealand only.

49 AUTO PROGRAMM TUNING Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. The maximum number of programmes that can be stored is 500. But the number may differ slightly depending on broadcasting signals. STUP Move STUP Move MNU Auto Tuning Manual Tuning Programme dit Software Update : On Diagnostics Select STUP. Select Auto Tuning. Select Start. Auto Tuning Manual Tuning Programme dit Software Update Diagnostics : On Check your antenna connection. The previous channel information will be updated during Auto Tuning. Automatic Numbering Start Close Use NUMBR buttons to input a -digit password in Lock System O n. If you wish to keep on auto tuning select Start using the button. Then, press the button. Otherwise select Close. Automatic Numbering: Decide whether to use the programme numbers as sent by broadcasting stations for tuning. WATCHING TV / PROGRAMM CONTROL Run Auto tuning. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 7

50 WATCHING TV / PROGRAMM CONTROL MANUAL PROGRAMM TUNING (IN DIGITAL MOD) Manual Tuning lets you manually add a programme to your programme list. STUP Move STUP Move F DTV G Auto Tuning Manual Tuning Programme dit Software Update Diagnostics : On Auto Tuning Manual Tuning Programme dit Software Update Diagnostics Your receiver will add this channel to your channel list. UHF CH. : On 0 Bad Normal Good WATCHING TV / PROGRAMM CONTROL MNU Select STUP. Select Manual Tuning. Select DTV. Select the desired channel number. Add Close Use NUMBR buttons to input a -digit password in Lock System O n. 5 Update. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 8

51 MANUAL PROGRAMM TUNING (IN ANALOGU MOD) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. STUP Move STUP Move MNU Auto Tuning Manual Tuning Programme dit Software Update Diagnostics : On Select STUP. Select Manual Tuning. Select T V. Auto Tuning Manual Tuning Programme dit Software Update Diagnostics F TV G Storage System : On Band Channel Search Select V/UHF or Cable. or Select the desired channel number. Commence searching. BG V/UHF 0 F G Name C 0 Store Close WATCHING TV / PROGRAMM CONTROL or Select the desired programme number on. 9 Select Store. 0 5 Select a TV system. (Only Singapore and New Zealand) Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. Use NUMBR buttons to input a -digit password in Lock System O n. B G : PAL B/G (urope / ast urope / Asia / New Zealand / M.ast / Africa / Singapore/Indonesia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) D K : PAL D/K (ast urope / China / Africa / CIS) B/B : Australia To store another channel, repeat steps to 9. 9

52 WATCHING TV / PROGRAMM CONTROL STUP Move STUP Move Auto Tuning Manual Tuning Programme dit Software Update Diagnostics : On Auto Tuning Manual Tuning Programme dit Software Update Diagnostics F TV G Storage : OnSystem BG Band V/UHF Channel 0 Search F G Name C 0 Store Close WATCHING TV / PROGRAMM CONTROL A Assigning a station name You can assign a station name with five characters to each programme number. MNU Select STUP. Select Manual Tuning. Select T V. Select Name. 5 Select the position and make your choice of the second character, and so on. You can use an the alphabet A to Z, the number 0 to 9, +/ -, and blank. 6 7 Select Close. Select Store. 50

53 PROGRAMM DIT When a programme number is skipped, it means that you will be unable to select it using P viewing. button during TV If you wish to select the skipped programme, directly enter the programme number with the NUMBR buttons or select it in the Programme edit menu. This function enables you to skip the stored programmes. You can change the programme number using Move function, if Automatic Numbering is unchecked when you start Auto Tuning. MNU STUP Move Auto Tuning Manual Tuning Programme dit Software Update : On Diagnostics Select STUP. Pr. Change TN Digital DTV RADIO TV TN Digital ABC TV Sydney 7 7 Digital 9 Nine Digital 0 TN Digital TN Guide TN HD 0 ABC HDTV ABC ABC TV 70 7 HD Digital 7 7 Digital 7 7 Digital 7 7 Digital 77 7 Guide 90 Nine Digital HD Navigation P Page Change Previous Skip WATCHING TV / PROGRAMM CONTROL Select Programme dit. nter the Programme dit. Select a programme to be stored or skipped. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 5

54 WATCHING TV / PROGRAMM CONTROL IN DTV/RADIO MOD A Skipping a programme number Select a programme number to be skipped. BLU Turn the programme number to blue. BLU Release. When programmes are to be skipped, the skipped programme shows in blue and these programmes will not be selected by the P buttons during TV viewing. If you wish to select a skipped programme, directly enter the programme number with the NUMBR buttons or select it in the programme edit or PG. WATCHING TV / PROGRAMM CONTROL IN TV MOD This function enables you to delete or skip the stored programmes. You can also move some channels and use other programme numbers. A Deleting a programme RD Select a programme number to be deleted. Turn the programme number to red. A Moving a programme Select a programme number to be moved. RD Delete. BLU Cancel. The selected programme is deleted, all the following programmes are shifted up one. GRN Release. BLU Cancel. GRN Turn the programme number to green. A Skipping a programme number When a programme number is skipped it means Select a programme number to be skipped. that you will be unable to select it using the P button during normal TV viewing. If you wish to select a skipped programme, directly BLU Turn the programme number to blue. enter the programme number with the NUMBR buttons or select it in the programme edit. BLU Release. 5

55 SOFTWAR UPDAT Software Update means software can be downloaded through the digital terrestrial broadcasting system. STUP Move STUP Move Auto Tuning Manual Tuning Programme dit Software Update :: On Auto Tuning Manual Tuning Programme dit Software Update Off : On Diagnostics Diagnostics On MNU Select STUP. Select Software Update. * When setting Software Update Occasionally, a transmission of updated digital software information will result in the following menu on the TV screen. Software update is available. Would you like to download now? (approximately 0 Min ~ hours) Your TV software is updated when you turn off the TV using the remote control or local key. Do not unplug! Save. Select the Yes using the button and you will see the following picture. Software downloading progress. Ver Ver % Select On or Off. If you select O n, a user confirm message box will be displayed to notify that new software is found. After the Software Update is complete, the System restarts. i New Software is successfully installed. WATCHING TV / PROGRAMM CONTROL Yes No Hide Stop Simple Update :for current update stream The new software is updated at the time below. 00/00/0 00:00 Would you like to download now? When the power is turned off, downloading starts. When the power is turned on while updating, the progress status is displayed. Yes No Schedule Update : for scheduled update stream When the Software Update menu is "Off", the message to change it to "O n" appears. - During Progress of a Software Update, please note the following: Power to the TV must not be interrupted. The TV must not be switched off. The antenna must not be disconnected. After Software Update, you can confirm the updated software version in Diagnostics menu. It may take hours to download the software, so make sure that the power stays on during the download. 5

56 WATCHING TV / PROGRAMM CONTROL DIAGNOSTICS This function enables you to view information on the Manufacturer, Model/Type and Software Version. This displays the information and signal strength of the tuned *MUX. This displays the signal information and service name of the selected MUX. (*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple channels.)) STUP Auto Tuning Move ngineering Diagnostics Manufacturer : LG lectronics Inc. Model/Type : LH50YD Software Version : V WATCHING TV / PROGRAMM CONTROL MNU Manual Tuning Programme dit Software Update : On Diagnostics Select STUP. Select Diagnostics. Display Manufacturer, Model/Type and Software Version. CH 0 CH CH 6 CH 8 CH 5 CH 60 Prev. D Popup MNU xit Display the information of Channel. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 5

57 SLCTING TH PROGRAMM LIST You can check which programmes are stored in the memory by displaying the programme list. Mini Glossary Displayed when the Locked Programme. Programme List TN Digital ABC TV Sydney 7 7 Digital A Displaying programme LIST LIST Display the Programme List. xit You may find some blue programmes. These have been set up to be skipped in the programme edit mode. Some programmes with the channel number shown in the programme LIST indicate there is no station name assigned. WATCHING TV / PROGRAMM CONTROL A Selecting a programme in the programme list Select a programme. Switch to the chosen programme number. TV/RAD The mode will be switched between TV, DTV, and Radio from the programme you are currently watching. A Paging through a programme list P P A G Turn the pages. LIST Return to normal TV viewing. 55

58 WATCHING TV / PROGRAMM CONTROL FAVOURIT PROGRAMM STUP A Selecting favourite programme Favorite programmes is a convenient feature that lets you quickly scan up to programmes of your choice without having to wait for the TV to scan through all the in-between programmes. F Favourite G F Favourite G WATCHING TV / PROGRAMM CONTROL or Favourite xcept for /6//7/LH***, /7/LH***, /6LU5*** P Select your desired programme. Q. MNU Q. MNU Select Favourite. Favourite Only /6//7/LH***, /7/LH***, /6LU5*** Select Favourite. Return to TV viewing. This will automatically include the selected programme into your favourite programme list. A Displaying the favourite programme list Favourite List TN Digital ABC TV Sydney 7 7 Digital MARK FAV Display the Favourite Programme List. xit 56

59 INPUT LIST HDMI and AV can be recognized by a detect pin and thus enabled only when an external device approves voltage. By using TV/RAD button, you can move from xternal Input to RF Input and to the last watched programme in DTV/RADIO/TV mode. INPUT Select the input source. Antenna AV AV Component Component HDMI (Only /7//7/55LH5***, /7LH9***, 7//7/55SL8***) (xcept for /6//7/LH***, LU5***) HDMI HDMI HDMI RGB (xcept for /6//7/LH***, LU5***) (xcept for /6//7/LH***, /7/LH***, /6LU5***) WATCHING TV / PROGRAMM CONTROL Antenna : Select it when watching the TV. A V : Select it when watching the VCR or external equipment. Component : Select it when using DVD or Digital set-top box depends on connector. RGB :Select it when using PC depends on connector. HDMI : Select it when using DVD or Digital set-top box depend on connector. 57

60 WATCHING TV / PROGRAMM CONTROL INPUT LABL Selects a label for each input source. WATCHING TV / PROGRAMM CONTROL MNU OPTION Move Audio Language : nglish Subtitle Language : nglish Hard of Hearing( ) : Off Country : Austalia Input Label SIMPLINK : On Key Lock : Off Simple Manual Select OPTION. Select Input Label. OPTION Move AV F Audio Language : nglish Subtitle Language AV : nglish Hard of Hearing( Component ) : Off Country Component : Austalia Input Label SIMPLINK RGB : On HDMI Key Lock : Off Simple Manual HDMI HDMI HDMI Close G (xcept for /6//7/LH***, LU5***) (xcept for /6//7/LH***, /7/LH***, /6LU5***) (xcept for /6//7/LH***, LU5***) (Only /7//7/55LH5***, /7LH9***, 7//7/55SL8***) Select the source. Select the label. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 58

61 SIMPL MANUAL You can easily and effectively access the TV information by viewing a simple manual on the TV. During the Simple Manual operation, audio will be muted. Image shown may differ from your TV. OPTION Move MNU Audio Language : nglish Subtitle Language : nglish Hard of Hearing( ) : Off Country : Austalia Input Label SIMPLINK : On Key Lock : Off Simple Manual Select OPTION. Select Simple Manual. WATCHING TV / PROGRAMM CONTROL Select the part of the manual you want to see. Press the RTURN button to return to normal TV viewing. 59

62 WATCHING TV / PROGRAMM CONTROL This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CC function. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. If you do not want SIMPLINK menu, select Off. WATCHING TV / PROGRAMM CONTROL OPTION Move Audio Language : nglish Subtitle Language : nglish Hard of Hearing( ) : Off Country : Australia Input Label SIMPLINK : On Key Lock : Off Simple Manual MNU Select OPTION. Select SIMPLINK. OPTION Move Audio Language : nglish Subtitle Language : nglish Hard of Hearing( ) : Off Country : Australia Input Label SIMPLINK Off : On Key Lock On : Off Simple Manual Save. Select On or Off. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. SIMPLINK Functions Disc playback Control connected AV devices by pressing the,, G, A, l l, FF and GG buttons. Direct Play After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. Select AV device nables you to select one of the AV devices connected to the TV and operate it. Power off all devices When you switch off the TV, all connected devices are turned off. Switch audio-out Offers an easy way to switch audio-out. Sync Power on When the equipment with Simplink function connected HDMI terminal starts to play, The TV will change automatically to turn on mode. * A device, which is connected to the TV through an HDMI cable but does not support SIMPLINK, does not provide this function. Note: To operate SIMPLINK, an HDMI cable over Version. with *CC function should be used. (*CC: Consumer lectronics Control). 60

63 Connecting to Home Theater with the SIMPLINK logo. Connect the HDMI/DVI IN, HDMI IN, HDMI IN (xcept for /6//7/LH***, LU5***) or HDMI IN (Only /7//7/55LH5***, /7LH9***, 7//7/55SL8***) terminal on the TV and the HDMI output terminal of the Home Theater using HDMI cables. Connect the Digital Audio output terminal on the back of the TV and the Digital Audio input terminal of the Home Theater using optical cables. Select Home Theater in the Speaker menu by pushing the SIMPLINK button. G When you select or operate a media device with home theater function, the speaker automatically switches to home theater speaker (HT speaker).! NOT (DVI) /DVI IN AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT RS-C IN (CONTROL & SRVIC) VIDO Y PB PR L R VIDO COMPONNT IN /MONO AUDIO AUDIO AV IN ANTNNA IN Home Theater G Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable. G When you switch the Input source using the INPUT button on the remote control, you can stop the operation of a device controlled by SIMPLINK. WATCHING TV / PROGRAMM CONTROL SIMPLINK Menu Press the button and then button to select the desired SIMPLINK source. TV viewing : Switch to the previous TV programme regardless of the current mode. 5 DISC playback : Select and play connected discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen. VCR playback : Play and control the connected VCR. HDD Recordings playback : Play and control recordings stored in HDD. Audio Out to Home theater/audio Out to TV: Select Home theater or TV speaker for Audio Out. 5 Change Device Selected Device When device is not connected (displayed in gray) When a device is connected (displayed in bright colour) 6

64 WATCHING TV / PROGRAMM CONTROL AV MOD You can select the optimal images and sounds when connecting AV devices to external input. Off Cinema Sport Game Disables the AV MOD. Optimizes video and audio for watching movies. Optimizes video and audio for watching sports events. Optimizes video and audio for playing games. WATCHING TV / PROGRAMM CONTROL Off Game Cinema Sport AV MOD Press the AV MOD button repeatedly to select the desired source. If you select Cinema in AV mode, Cinema will be selected both for Picture Mode and Sound Mode in PICTUR menu and AUDIO menu respectively. If you select Off in AV mode, the picture and image which you initially set will be selected. 6

65 INITIALIZING (RST TO ORIGINAL FACTORY STTINGS) This function initializes all settings. But the settings of Day and Night of the Picture Mode cannot be initialized. It is useful to initialize the product or when you move to other city or country. When the Factory Reset is completed, you must restart the Initializing setup. When the Lock System menu is "On", the message to enter the password appears. OPTION SIMPLINK Key Lock Move : On : Off Simple Manual Set ID : Power Indicator Demo Mode : On Mode Setting : Store Demo Factory Reset OPTION SIMPLINK Key Lock Move : On : Off Simple Manual Set ID All user : settings and channel Power Indicatorsettings will be reset. Still Demo Mode Continue? : On Mode Setting : Store Demo Yes No Factory Reset WATCHING TV / PROGRAMM CONTROL MNU Select OPTION. Select Factory Reset. In Lock System "O n", if you forget your password, press '7', '7', '7', '7' on the remote control handset. Select Yes. Start Factory Reset. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 6

66 TO US TH BLUTOOTH (Only /7LH9***, 7//7/55SL8***) Bluetooth? Bluetooth is a short distance networking technology using. GHz frequency to connect various types of information devices such as computers, cell phones and PDAs, as well as digital appliances through wireless connection, without having to connect any cable, to enable data exchange. With the Bluetooth communication function, you can connect the Bluetooth enabled wireless headset or receive images(only JPG), listen to music from the Bluetooth enabled cell phone using this TV. TO US TH BLUTOOTH Communication Spec.: Bluetooth Specification Version.0 + DR (nhanced Data Rate) Output: Bluetooth Specification Power Class Maximum Communication Range: Line of open sight approx. 0m (0ft) Frequency Band:. GHz band (. GHz ~.85GHz) Bluetooth Module: AX57580 (LG lectronics) Compatible Bluetooth Profile: ADP (Advanced Audio Distribution Profile) OPP (Object Push Profile) GAVDP (Generic Audio/Video Distribution Profile) HSP (Headset Profile) BIP (Basic Imaging Profile) FTP (File Transfer Profile) 0678 FCC ID: BJAX57580 Precautions when using the Bluetooth G Use within 0m(-5 ~ 5 ) range. G If you use the device out of the range or within the range with obstacles, it can result in communication error. G Communication error can occur depending on the surrounding devices. G Products using the same frequency of. GHz (Wireless LAN, microwave oven etc.), can cause communication error by using the same frequency bandwidth. G The device search time differs depending on the number of Bluetooth devices and the operating situation. G The probability of search increases with less number of devices. G lectromagnetic wave can be interfered with applicable wireless devices. G Because applicable wireless devices have the possibility of electromagnetic wave interference, they cannot provide services related to human life. G You can only connect one Bluetooth device at a time. G You cannot receive photos(only JPG) or listen to music from other Bluetooth devices while using the Bluetooth headset. G For details of Bluetooth, refer to the user manual of the Bluetooth device. G USB (Photo List, Music List, Movie List) and Bluetooth will not be supported at the same time. G Operation is subject to the following two conditions : () This device may not cause (harmful) interference, and () this device must accept any interference received, including interference that may cause undesired operation (of the device). QDID(Qualified Design Identity) : B086 6

67 STTING TH BLUTOOTH If you want to listen to the broadcasted sound using the Bluetooth headset or receive the jpeg images from an external device and view them on the TV, listen to music from cell phone(bluetooth device), you can use the wireless communication without having to connect any cables. You can use the BLUTOOTH menu by selecting O n. If you do not want to use the Bluetooth function, select Off. If it is connected to the external Bluetooth device, you can select Off after disconnecting the device. When the Bluetooth is set On along with any other devices connected, even if other input mode is broadcasted, it can be changed to Bluetooth automatically. In this case, set the bluetooth Off. BLUTOOTH Move BLUTOOTH Move Bluetooth : Off Bluetooth : Off Off TV PIN : 0000 TV PIN : On 0000 Bluetooth Headset : Disconnected Registered Bluetooth Device My Bluetooth Info. Bluetooth Headset : Disconnected Registered Bluetooth Device My Bluetooth Info. TO US TH BLUTOOTH MNU Select BLUTOOTH. Select Bluetooth. Select On or Off. Save. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 65

68 TO US TH BLUTOOTH ST TV PIN To accept connection from an external Bluetooth device or to connect to an external Bluetooth device, the PIN needs to be entered. For details on how to set the PIN of the external Bluetooth device, refer to the user manual of the applicable device. The TV PIN is composed of numbers of up to 0 digits. The TV PIN must have more than digit. BLUTOOTH Move BLUTOOTH Move TO US TH BLUTOOTH MNU Bluetooth : Off TV PIN : 0000 Bluetooth Headset : Disconnected Registered Bluetooth Device My Bluetooth Info. Select BLUTOOTH. Select TV PIN. Bluetooth : Off Set TV PIN TV PIN : _ Bluetooth Headset : Disconnected Registered Bluetooth Device My Bluetooth Info. Delete Press the button to delete digits one by one Select the desired PIN number. 0 Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 66

69 BLUTOOTH HADST When you select the Bluetooth headset, you can listen to the TV sound in the Bluetooth headset through wireless communication. You must pair it with any new Bluetooth device before the first use. For details, refer to the user manual of the applicable device. A maximum of devices can be paired. When the unit is searching for the Bluetooth headset, other buttons except for the Stop ( button) do not work. Connecting a new Bluetooth headset You can only search for the new Bluetooth headset only in the Disconnected condition. When you run the search, it will show you the list of all Bluetooth headsets responding. After new Bluetooth device is searched, the PIN number is validated to connect the device. For details, refer to the user manual of the applicable device. MNU GRN Select BLUTOOTH. Select Bluetooth Headset. Search the Bluetooth headset Select Bluetooth headset PIN number. Refer to the user manual of the applicable device for the PIN number. Connect the Bluetooth headset. TO US TH BLUTOOTH Connecting to Bluetooth headset already registered Bluetooth headsets are listed in the order most recently used with the headset currently in use listed at the top. When connecting to the Bluetooth device already registered, you can select and connect directly without any PIN validation. MNU Select BLUTOOTH. Select Bluetooth Headset. Select the desired Bluetooth headset. 5 Message asking to connect the selected Bluetooth headset will be displayed. Select Yes or N o. Connect the Bluetooth headset. After connecting/using the Bluetooth headset, the headset setting will be the Disconnected condition automatically when you turn off the power of the TV and then turn on. After connecting the Bluetooth headset, the TV speaker is switched to Mute condition and the sound will only be generated from the headset. 67

70 TO US TH BLUTOOTH Disconnecting the Bluetooth headset during use MNU Select BLUTOOTH. Disconnect the Bluetooth headset. Select Bluetooth Headset. TO US TH BLUTOOTH When requesting to connect to TV from the Bluetooth headset When the Bluetooth menu is "On" and there is a connection request from the headset, this message is dispalyed. Not all headsets support the this feature.(refer to the user manual of the applicable Bluetooth headset.) Some headset types may make an attempt at connection when they are turned on/off even though are not included in the Registered Device list. Select Yes or N o.! NOT G LG recommends the following headset models. -Mono/Stereo : Nokia : BH50 / Jabra : BT60s / Sony : DR-BT0Q/ Philips : SHB700 / Plantronics : Pulsar590 / Motorola : HT80 / Motorola : S9 / LG : HBS00 -Only Stereo : Logitech : Freepulse-wireless -Only Mono : Motorola : H800 / Jabra : BT50v / Jabra : BT00 / Plantronics : Discovery665 / Nokia : BH-900 / Sony ricsson : HBH-GV5 / Samsung : WP500 / LG: Prada HBM-50 There might be an audio delay, depending on the buffer memory size of the headset. G The stereo/mono headset officially certified to be Bluetooth compatible can be searched and connected. G The stereo/mono headset that supports the ADP or HSP function among the Bluetooth devices can be connected. G If the surrounding environment of the TV is as follows, the device may not be searched or connected properly. -If there is strong electromagnetic wave. -If there are many Bluetooth devices. -If the headset is turned off, not in place or has an error. -Because products such as microwave oven, wireless LAN, Do you want to use your headset? plasma light, gas range etc., use the same frequency range, it can cause communication error. G Only one Bluetooth headset can be connected at once. G Connection that is lost due to the TV being turned off etc. will not be automatically recovered. Try connecting the applicable device again. G Some operations can be slower while operating the headset. G ven if you choose simplink Home Theater after using the headset during Simplink operation, the unit will not automatically switch to Home Theater speakers. G When the headset connection continuously fails, pair the device one more time. G The audio quality of mono headsets will not be as good as that for stereo headsets. G Mono headsets may suffer from noise as the distance from the TV increases, because they use a different transmission method compared with stereo headsets. G When a Bluetooth headset is in use, the Volume +/- and Mute keys do not work, and the Audio menu returns to the default value and is disabled. Yes No 68

71 MANAGING RGISTRD BLUTOOTH DVIC If there are no devices registered, Registered Bluetooth Device menu will be deactivated and cannot be used. When devices are registered, you cannot register any more devices, and the external device will no longer be able to pair up with the TV. In this case, you should delete one (disconnect first if a device is connected to the TV) and then you can register another device. BLUTOOTH Move BLUTOOTH Move Bluetooth : Off TV PIN : 0000 Bluetooth Headset : Disconnected Registered Bluetooth Device My Bluetooth Info. Bluetooth : Off Registered Bluetooth Device TV PIN : :0d::8::6 Bluetooth Headset : Disconnected Registered Bluetooth Device FreePulse_Wireless My Bluetooth Info. LG L600V Connect Delete MNU Select BLUTOOTH. Select Registered Bluetooth Device. Check the registered Bluetooth device. A Connecting the registered Bluetooth headset Select the registered Bluetooth headset you want to connect. BLU Message asking to connect the selected Bluetooth headset will be displayed. TO US TH BLUTOOTH Select Yes or N o. A Deleting registered Bluetooth device "Delete" will be available when selecting the device that is not connected to the TV. Select the Bluetooth device you want to remove. RD Message asking to delete the selected Bluetooth device will be displayed. Select Yes or N o. A Disconnecting registered Bluetooth device "Disconnect" will be available when selecting the device that is connected to the TV. Select the Bluetooth device that is currently connected to the TV. BLU Disconnect the Bluetooth device. 69

72 TO US TH BLUTOOTH MY BLUTOOTH INFORMATION This function provides the My Bluetooth Information to the user. "dit" will be available when TV is not connected with any device. You can edit the My Device Name. You can check the My Device Address. BLUTOOTH Move BLUTOOTH Move Bluetooth : Off TV PIN : 0000 Bluetooth Headset : Disconnected Registered Bluetooth Device My Bluetooth Info. Bluetooth : Off TV PIN : 0000 Bluetooth Headset : Disconnected Registered Bluetooth My Device Device Name My Bluetooth Info. 7 L H 9 0 Q D TO US TH BLUTOOTH MNU Select BLUTOOTH. My Device Address 00:05:c9:ff:00f:07 dit Select My Bluetooth Info.. BLU You can use an the alphabet A to Z, the number 0 to 9, +/ -, and blank. Save. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 70

73 RCIVING PHOTOS FROM XTRNAL BLUTOOTH DVIC For details on how to send photos(only JPG) from the external Bluetooth device to TV, refer to the user manual of the applicable device. Receiving file(s) F / G Close When you select Close with the button, the OSD will disappear. And when you press the button again, it will appear again. Select the desired photos. (Rotate) : Rotate photos. Rotates the photo 90 clockwise upon button on (Rotate). The maximum accumulated size of the image(s) that can be received is 0MBytes. You cannot receive the image(s) while using the Bluetooth headset. You cannot receive the image(s) while listening to music from Bluetooth device. When the external Bluetooth device is currently sending the photo, press the RTURN button to stop receiving the photo. All photos already received will be deleted as a result. With some Bluetooth devices, you may not be able to transmit an image (JPG) file to the TV set. LISTNING TO TH MUSICS FROM XTRNAL BLUTOOTH DVIC For details on how to listen to the musics from the external Bluetooth device to TV, refer to the user manual of the applicable device. You should use the Bluetooth device supporting ADP(as external device) With some Bluetooth devices, you may not be able to listen to music via the TV speaker system. TO US TH BLUTOOTH Back to TV Press the + or - button to adjust the volume. If you wish to switch the sound off, press the MUT button. Press the RTURN button to return to normal TV viewing.! NOT G You cannot listen to music while using the Bluetooth headset. G You cannot listen to music while receiving image(s). 7

74 TO US A USB DVIC G It is not possible to use USB function in /6//7/LH***, /7/LH***, /6LU5*** models. When connecting a USB device When you connect a USB device, this pop up menu is displayed, automatically. POP UP MNU will not be displayed while the OSD including Menu, PG or Schedule list is activated or while the Bluetooth Headset is connected. When the Pop Up menu does not appear, you can select Music List, Photo List or Movie List in the USB menu. In USB device, you can not add a new folder or delete the existing folder. Connect the USB device to the USB IN jack on the TV. Only photo(jpg), music (MP) and movie(dat, MPG, MPG, VOB, AVI, DIVX, MP, MKV, TS, TRP, TP) are supported. When removing the USB device TO US A USB DVIC 7 N USB memory stick Select PHOTO LIST, MUSIC LIST or MOVI LIST. PHOTO LIST MUSIC LIST MOVI LIST Precautions when using the USB device Select the USB Device menu before removing the USB device. Q. MNU Select USB Device. G Only a USB storage device is recognizable. G If the USB storage device is connected through a USB hub, the device is not recognizable. G A USB storage device using an automatic recognition programme may not be recognized. G A USB storage device which uses its own driver may not be recognized. G The recognition speed of a USB storage device may depend on each device. G Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. G Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files, image files or movie files. G Please use only a USB storage device which was formatted as a FAT file system, NTFS file system provided with the Windows operating system. In case of a storage device formatted as a different utility programme which is not supported by Windows, it may not be recognized. G Please connect power to a USB storage device(over 0.5A) which requires an external power supply. If not, the device may not be recognized. G Please connect a USB storage device with the cable offered by the device maker. G Some USB storage devices may not be supported or operated smoothly. G File alignment method of USB storage device is similar to Window XP and filename can recognize up to 00 nglish characters. G Be sure to back up important files since data stored in a USB memory device may be damaged. We will not be responsible for any data loss. G If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power source. G Data in a USB storage device cannot be deleted in the NTFS file system. G If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to partitions or USB memory devices. G Only the FAT file system supports the delete function. G If a USB memory device is connected to a USB multi-card reader, its volume data may not be detected. G If the USB memory device does not work properly, disconnect and reconnect it. G How fast a USB memory device is detected differs from device to device. G If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is turned on. G The recommended capacity is TB or less for a USB external hard disk and GB or less for USB memory. G Any device with more than the recommended capacity may not work properly. G If a USB external hard disk with a "nergy Saving" function does not work, turn the hard disk off and on again to make it work properly. Select ject.

75 PHOTO LIST You can view photo files on USB storage device. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. When you are watching the photo by the Photo List function, you can not change the picture mode. PHOTO(*.JPG) supporting file Baseline : 6 x 6 ~ 560 x 860 Progressive : 6 x 6 ~ 90 x 0 You can play JPG files only. Non-supported files are displayed in the form of predefined icon. Screen Components MNU Select USB. Moves to upper level folder Current page/total pages Total number of marked photos Corresponding buttons on the remote control Photo List Drive JMJ00 Page / Up Folder Select Photo List. No Marked KY0 09/0/008 KY0 09/0/008 KY0 09/0/008 KY0 09/0/008 KY05 09/0/008 TO US A USB DVIC JMJ00 09/0/008 JMJ005 09/0/008 66x768, 5KB Up Folder JMJ00 09/0/008 JMJ00 09/0/008 JMJ00 09/0/008 JMJ006 09/0/008 JMJ007 09/0/008 JMJ008 09/0/008 Navigation Popup Menu Page Change MARK Mark xit 7

76 TO US A USB DVIC Photo Selection and PopUp Menu Photo List Drive JMJ00 66x768, 5KB Up Folder Page / No Marked Up Folder KR0 09/0/008 KR0 09/0/008 JMJ00 09/0/008 JMJ00 09/0/008 JMJ00 09/0/008 JMJ00 09/0/008 KR0 09/0/008 KR0 09/0/008 KR05 09/0/008 JMJ005 09/0/008 JMJ006 09/0/008 JMJ007 09/0/008 JMJ008 09/0/008 Navigation Popup Menu Page Change MARK Mark xit TO US A USB DVIC Photo List Drive JMJ00 66x768, 5KB Up Folder Page / No Marked Up Folder KR0 09/0/008 KR0 09/0/008 KR0 09/0/008 66x768, 5KB KR0 09/0/008 KR05 09/0/008 JMJ00 09/0/008 View JMJ005 09/0/008 Mark All JMJ00 09/0/008 JMJ006 09/0/008 Delete JMJ00 09/0/008 JMJ007 09/0/008 Close JMJ00 09/0/008 JMJ008 09/0/008 Navigation Popup Menu Page Change MARK Mark xit G View : Display the selected item. G Mark All : Mark all photos on the screen. G Unmark All : Deselect all marked photos. G Delete or Delete Marked(FAT file system only) : Delete the selected photo item. G Close : Close the pop-up menu. Select the target folder or drive. Select the desired photos. Show the PopUp menu. Select the desired PopUp menu. Use the P button to navigation in the photo page. Use the MARK button to mark or unmark a photo. When one or more photos are marked, you can view each marked photo or a slide show of the marked photos. If no photos are marked, you can view every individual photo in the folder or a slide show of all photos in the folder. Press the RTURN button to return to normal TV viewing. 7

77 How to view photo Detailed operations are available on full-sized photo view screen. Photo List Drive JMJ00 66x768, 5KB Up Folder Page / No Marked Up Folder KR0 09/0/008 KR0 09/0/008 JMJ00 09/0/008 JMJ00 09/0/008 JMJ00 09/0/008 JMJ00 09/0/008 KR0 09/0/008 KR0 09/0/008 KR05 09/0/008 JMJ005 09/0/008 JMJ006 09/0/008 JMJ007 09/0/008 JMJ008 09/0/008 Navigation Popup Menu Page Change MARK Mark xit Photo List Drive JMJ00 66x768, 5KB Up Folder Page / No Marked Up Folder KR0 09/0/008 KR0 09/0/008 KR0 09/0/008 66x768, 5KB KR0 09/0/008 KR05 09/0/008 JMJ00 09/0/008 View JMJ005 09/0/008 Mark All JMJ00 09/0/008 JMJ006 09/0/008 Delete JMJ00 09/0/008 JMJ007 09/0/008 Close JMJ00 09/0/008 JMJ008 09/0/008 Navigation Popup Menu Page Change MARK Mark xit /7 Slideshow BGM Delete Option Hide The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. Press the RTURN button to move to the previous menu screen. TO US A USB DVIC Select the target folder or drive. Select the desired photos. Use the P photo page. button to navigation in the Show the PopUp menu. Select View. 5 The selected photo is displayed in full size. 75

78 TO US A USB DVIC 6 Select the Slideshow, BGM, Delete, Option or Hide. (Rotate), /7 Slideshow BGM Delete Option Hide Use button to select the previous or next photo. Use button to select and control the menu on the full-sized screen. G Slideshow : When no picture is selected, all photos in the current folder are displayed during slide show. If some photos are selected, those photos are displayed in a slide show. Set the time interval of the slide show in Option. TO US A USB DVIC G BGM (Background Music) : Listen to music while viewing photos in full size. Set the Music Folder for BGM in Options before using this function. G ( Rotate) : Rotate photos. Rotates the photo 90, 80, 70, 60 clockwise. It can not be rotate when the width of a picture is bigger than supported height. G Delete(FAT file system only) : Delete photos. G Option : Set values for Slide Speed and Music Folder for BGM. Use button and O K button to set values. Then go to and press O K to save the settings. You cannot change Music Folder while BGM is playing. Press F G to set the time interval between slides. Slide Speed Fast Music Folder Music Cancel G Hide : Hide the menu on the full-sized screen. To see the menu again on the full-sized screen, press button to display. 76

79 MUSIC LIST You can play music files on USB storage device. Purchased music files(*.mp) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. MUSIC (*.MP) supporting file Bit rate ~ 0 Sampling rate MPG Layer : khz,.khz, 8kHz Sampling rate MPG Layer : 6kHz,.05kHz, khz Sampling rate MPG.5 Layer : 8kHz,.05kHz, khz Screen Components 5 MNU Select USB. Preview: If any album jacket for the file(album Art Image) exists, this jacket is displayed. Moves to upper level folder Current page/total pages Total number of marked music title Corresponding buttons on the remote control Music List Music 00:00/0: Up Folder Page / Up Folder Select Music List. No Marked Title Duration 0: 0: 0:8 Navigation Popup Menu Page Change MARK Mark xit TO US A USB DVIC 5 77

80 TO US A USB DVIC Music Selection and PopUp Menu As shown, up to 6 music titles are listed per page. TO US A USB DVIC Music List Music 00:00/0: Up Folder Music List Up Folder Page / Page / No Marked Up Folder Navigation Popup Menu Page Change MARK Mark xit Music 00:00/0: No Marked Up Folder Title Title Duration 0: 0: 0:8 95KB Kbps Play Play with Photo Mark All Delete Close 0:8 Navigation Popup Menu Page Change MARK Mark xit G Play (During stop) : Play the selected music titles. One playback of a piece of music finishes, the next selected one will be played. When there are no selected music titles to play, the next one in the current folder will be played. If you go to a different folder and press the O K button, the current music in playback will stop. G Play Marked : Play the selected music titles. Once a music finishes playing, the next selected one will be played automatically. G Stop Play (During playback) : Stop the playing music titles. G Play with Photo : Start playing the selected music titles and then move to the Photo List. G Mark All : Mark all music titles in the folder. G Unmark All : Deselect all marked music titles. G Delete or Delete Marked(FAT file system only) : Delete the selected music titles. G Close : Close the pop-up menu. Select the target folder or drive. Select the desired music title Show the PopUp menu. Select the desired PopUp menu. Use the P button to navigate up/down in the music page. Use MARK button to mark or unmark a music. When one or more music files are marked, the marked music title will be played in sequence. For example, if you want to listen to only one music repeatedly, just mark the music only and play it. If no music is marked, all the music in the folder will be played in sequence. Press the RTURN button to return to normal TV viewing. 78

81 If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. The Screen Saver? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time.! NOT G When a music file is played, is displayed behind the title. G A damaged or corrupted music does not play but displays 00:00 in playtime. G A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime. G If you press O K, A buttons, screen saver is stopped. G The PLAY( G ), Pause(I I), A, GG, FF buttons on the remote control are also available in this mode. G You can use the GG button to select the next music and the FF button to select the previous music. TO US A USB DVIC 79

82 TO US A USB DVIC MOVI LIST You can play movie files on a USB storage device. The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files. It is a movie list that displays folder information and movie file. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. TO US A USB DVIC Movie(*.dat/*.mpg/*.mpeg/*.ts/*.trp/*.tp/*.vob/*.mp/*.mkv/*.avi/*.divx) supporting file Video format :DivX., DivX., DivX5.x, DivX6, Xvid.00, Xvide.0, Xvid.0, Xvid.0, Xvid.0- beta-/beta-, Mpeg-, Mpeg-, Mpeg-, H.6/AVC Audio format : Dolby Digital, AAC, Mpeg, MP, LPCM, HAAC Bit rate : within ~ 0kbps(MP) Subtitle format : *.smi/*.srt/*.sub(microdvd, SubViewer.0/.0)/*.ass/*.ssa/*.txt(TMPlayer)/*.psb(PowerDivx) Some user-created subtitles may not work properly. Some special characters are not supported in subtitles. HTML tags are not supported in subtitles. Subtitles in languages other than the supported languages are not available. Time information in an external subtitle file should be arranged in ascending order to be played. The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio language is changed. A damaged movie file may not be played correctly, or some player functions may not be usable. Movie files produced with some encoders may not be played correctly. If the video and audio structure of recorded file is not interleaved, either video or audio is outputted. HD videos with a maximum of 90x080@5/0P or 80x70@50/60P are supported, depending on the frame. Videos with resolutions higher than 90X080@5/0P or 80x70@50/60P may not work properly depending on the frame. Movie files other than the specified types and formats may not work properly. Max bitrate of playable movie file is 0Mbps. We do not guarantee smooth playback of profiles encoded level. or higher in H.6/AVC. DTS Audio codec is not supported. A movie file more than 0GB in file size is not supported for playback. A video file name and its subtitle file name must be identical for it to be displayed. A DivX movie file and its subtitle file must be located in the same folder. Playing a video via a USB connection that does not support high speed may not work properly. USB storage devices below USB.0 are supported as well. But they may not work properly in the movie list. Files encoded with GMC(Global Motion Compensation) may not be played. Only the files saved in ASCll COD is supported for the external subtitles of the movie. Only 500 alphabets and 500 numbers are supported for each line of the subtitle. Only 0,000 of sync blocks can be supported within the subtitle file. When you are watching the movie by Movie List function, you can adjust an image by nergy Saving and AV Mode key on the remote control. User setup for each image mode does not operate. 80

83 File xtension name mpg, mpeg, vob dat ts,trp,tp mp Video Decoder MPG, MPG MPG MPG, H.6/AVC MPG SP, MPG ASP, Divx., Dvix., Dvix 5.x Audio Codec Dolby Digital, MPG, MP, LPCM Dolby Digital, MPG, MP, LPCM Dolby Digital, AAC, MPG Dolby Digital, HAAC, AAC, Resolution (Max) Dvix 6, Xvid.00, Xvid.0, Xvid.0, Xvid.0 MPG, MP, LPCM Xvid.0 beta, Xvid.0-beta, H.6/AVC avi mkv MPG, MPG SP, MPG ASP, Divx., Divx, Divx 5, Divx 6 Xvid.00, Xvid.0, Xvid.0, Xvid.0, Xvid.0 beta Xvid.0 beta, H.6/AVC H.6/AVC, MPG, MPG, MPG SP, MPG ASP Dolby Digital, HAAC, AAC, MPG,MP, LPCM Dolby Digital, HAAC, 90x080@0p divx MPG, MPG SP, MPG ASP, Divx., Divx, Divx 5, Divx 6 Xvid.00, Xvid.0, Xvid.0, Xvid.0, Xvid.0 beta Xvid.0 beta, H.6/AVC Screen Components MNU Select USB. AAC, MPG, MP, LPCM Dolby Digital, HAAC, AAC, MPG, MP, LPCM Select Movie List. TO US A USB DVIC Moves to upper level folder Current page/total pages Total number of marked movie title Corresponding buttons on the remote control Movie List movie Page / No Marked Title Up Folder Duration 60x80, 70KB Up Folder Navigation Popup Menu Page Change MARK Mark xit 8

84 TO US A USB DVIC Movie Selection and PopUp Menu Movie List movie Page / No Marked Title Up Folder Duration :0, 0KB Up Folder Navigation Popup Menu Page Change MARK Mark xit TO US A USB DVIC Movie List movie :0, 0KB Up Folder Page / No Marked Title Duration Up Folder 66x768, 5KB Play Mark All Delete Close Navigation Popup Menu Page Change MARK Mark xit G Play : Play the selected movie. Divx Play is executed while screen changes. G Mark All : Mark all Movie in the folder. G Unmark All : Deselect all marked movies. G Delete or Delete Marked(FAT file system only) : Delete the selected Movie item. G Close : Close the pop-up menu. Select the target folder or drive. Select the desired movie title Show the PopUp menu. Use the P button to navigation in the movie page. Use MARK button to mark or unmark a movie. When one or more movie files are marked, the marked movies will be played in sequence. Select the desired PopUp menu. Press the RTURN button to return to normal TV viewing.! NOT G In the case of files not supported, a message regarding non-supported file is displayed. 8

85 Using the Movie List function, play Picture Size Audio Language Subtitle Language. Sync. Position F Full G Off 0 0 Close! NOT G In Australia, Singapore, New Zealand and Indonesia the only language supported for subtitles is nglish. Using the remote control FF / GG Option G Picture Size : Selects your desired picture format during movie play. G Audio Language & Subtitle Language : Changes the Language Group of the audio/subtitle during movie play. G Sync : Adjusts the time synchronisation of the subtitle from -0 secs ~ +0 secs by steps of 0.5 secs during movie play. G Position : Changes the position of the subtitle either up or down during movie play. When playing, repeatedly, press the RW( FF ) button to speed up FF(x) -> FFF(x) -> FFFF(x8) -> FFFFF(x6) ->FFFFFF(x). repeatedly, press the F F( GG ) button to speed up GG(x)-> GGG(x) -> GGGG(x8) -> GGGGG(x6) -> GGGGGG(x). Pressing these buttons repeatedly increases the fast forward/reverse speed. TO US A USB DVIC I I During playback, press the Pause(I I) button. Still screen is displayed. If no buttons are pressed on the remote control for 0 minutes after pausing, the TV returns to the playback state. Press the Pause(I I) button and then use the FF(GG) button for slow motion. When using the or button during playback a cursor indicating the position can be viewed on the screen. PLAY( G ) Press the PLAY( G ) button to return to normal playback. Press the NRGY SAVING button repeatedly to increase the brightness of your screen.(refer to p. 9) AV MOD Press the AV MOD button repeatedly to select the desired source.(refer to p. 6) 8

86 TO US A USB DVIC DIVX RGISTRATION COD Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.) USB Move USB Move Photo List Music List Movie List DivX Reg. Code Deactivation Photo List Music List Movie List DivX Reg. Code Deactivation DivX(R) Video On Demand Your registration Code is: xxxxxxxxxx To learn more visit Close TO US A USB DVIC MNU Select USB. Select DivX Reg. Code. Display DivX Reg. Code. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. DivX Certified to play DivX video up to HD 080p, including premium content ABOUT DIVX VIDO : DivX is a digital video format created by DixX,Inc. This is an official DivX Certified device that plays DivX video. Visit for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDO-ON-DMAND : This DivX Certified device must be registered in order to play DivX Video-on-Demand[VOD] content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. 8! NOT G Movie files are supported as follows Resolution : under 90x080 WxH pixels Frame rate : under 0 frames/sec(90x080), under 60 frames/sec(under 80x70) G Video Codec : MPG, MPG, MPG, H.6/AVC, Divx., Divx., Divx 5.x, Divx 6, Xvid.00, Xvid.0, Xvid.0, Xvid.0, Xvid.0-beta, Xvid.0-beta

87 DACTIVATION The purpose of deactivation is to allow deactivation of devices for users who have activated all the available devices through the web_server and are blocked from activating more devices. DivX VOD allowed the consumer to activate up to 6 devices under one account, but to replace or deactivate any of those devices, the consumer had to contact DivX Support and request deletion. Now with this added feature, consumers will be able to deactivate the device themselves and hence better manage their DivX VOD devices. USB Move USB Move Photo List Music List Movie List DivX Reg. Code Deactivation Photo List Music List Movie List DivX Reg. Code Deactivation DivX(R) Video On Demand Do you want to deactivate your device? DivX(R) Video On Demand This device is deactivated. Your deactivation code is: xxxxxxxx To learn more visit Yes No Close MNU Select USB. Select Deactivation. TO US A USB DVIC Select Yes. Display Deactivation. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 85

88 PG (LCTRONIC PROGRAMM GUID)(IN DIGITAL MOD) (Only Australia, Singapore and Indonesia) This system has an lectronic Programme Guide (PG) to help your navigation through all the possible viewing options. The PG supplies information such as programme listings, start for all available services. In addition, detailed information about the programme is often available in the PG (the availability and amount of these programme details will vary, depending on the particular broadcaster). This function can be used only when the PG information is broadcast by broadcasting companies The PG displays the programme details for next 8 days. Shows the present screen information. Switch on/off PG GUID Displayed with a DTV Programme. Displayed with a Radio Programme. Displayed with a MHG Programme. Displayed with a AAC Programme. Aspect ratio of broadcasting programme. Aspect ratio of broadcasting programme. Switch on or off PG. Displayed with a Teletext Programme. Displayed with a Subtitle Programme. Displayed with a Scramble Programme. Displayed with a Dolby Programme. Displayed with a Dolby Digital PLUS Programme. 576i/p, 70p, 080i : Resolution of broadcasting programme PG (LCTRONIC PROGRAMM GUID)(IN DIGITAL MOD) Select a programme or P Select desired programme. Button Function in NOW/NXT Guide Mode You can view a programme being broadcasted and one scheduled to follow. RD YLLOW BLU Change PG mode. nter Timer Remind setting mode. nter Timer Remind list mode. The PG will disappear after moving to a selected programme. Select NOW or NXT Programme. Select the Broadcast Programme. The PG will disappear after moving to a selected programme. Programme Guide YL TV 6 Apr :09 ALL NOW NXT YL TV That 70s show Keno YL TV Your World Today World Business TV.. Legenen om Den... Fantomen 5 YL FST Naturtimmen Kritiskt 6 CNN Lyssna ABC 8 YL Glamour Tänään otsikoissa FAV Favourite GUID TV/RAD INFO i Information Pr. Change TV/RAD RADIO Mode Schedule Schedule List or Select TV or RADIO Programme. Switch off PG. 86 P Page Up/Down. Detail information on or off

89 Button Function in 8 Day Guide Mode RD BLU Change PG mode. GRNnter Date setting mode. YLLOW nter Timer Remind setting mode. nter Timer Remind list mode. The PG will disappear after moving to a selected programme. Select Programme. Programme Guide YL TV 6 Apr :09 P GUID ALL Page Up/Down. or Fri. 6. Apr. :00 5:00 YL TV Antigues Roadshow Kungskonsumente YL TV Mint xtra TV: Farmen The Drum TV.. The Drum 5 YL FST 6 CNN You Call The Hits Fashion ssentials 8 YL Tänään otsikoissa FAV Favourite INFO i Information Mode Date Schedule Schedule List Pr. Change Switch off PG. TV/RAD RADIO Select the Broadcast Programme. Button Function in Date Change Mode GRNSwitch off Date setting mode. GUID Change to the selected date. Select a date. Switch off Date setting mode. or Switch off PG. TV/RAD Select TV or RADIO Programme. Detail information on or off Programme Guide YL TV 6 Apr :09 ALL Fri. 6. Apr. :00 5:00 YL TV Antigues Roadshow Kungskonsumente YL TV Mint xtra TV: Farmen The Drum TV.. The Drum 5 YL FST 6 CNN You Call The Hits Fashion ssentials 8 YL Tänään otsikoissa Date. Change Date xit PG (LCTRONIC PROGRAMM GUID)(IN DIGITAL MOD) 87

90 PG (LCTRONIC PROGRAMM GUID)(IN DIGITAL MOD) Button Function in xtended Description Box Text Up/Down. Information 6 Apr :09 YLLOW nter Timer Remind setting mode. 6 Apr. 007 or The detail information on or off. GUID Switch off PG. INFO i Info. xit Schedule Button Function in Remind Setting Mode Change to Guide or Schedule mode. PG (LCTRONIC PROGRAMM GUID)(IN DIGITAL MOD) Select Remain. Function setting. Select Date, Start time or Programme. Save Timer Remind. Button Function in Schedule List Mode If you ve created a schedule list, a scheduled programme is displayed at the scheduled time even when you are watching a different programme at the time. Only the Up/Down//Return keys will work when a popup window is open. GRN Add New Remind setting mode. BLU or GUID Switch off PG. Select Schedule List. Change to Guide mode. Select your desired Option(Modify/Delete/Delete All). Schedule List D Move Remind DTV 9 Dave (Fri.)06/05/007 6:00 Select the date to remind Date Start Time Programme 6 Mar. 5:09 That 70s sh Page/ Fri. 6 Apr :09 Start Date Start Time Title 6 May 6:00 Friend Friend 6:00 6 May 8:00 Friend Modify Delete Delete All Close Modify/Delete New Remind P Page Change Prev. xit Programme Guide P Page Up/Down. 88

91 MHG (MULTIMDIA AND HYPRMDIA INFORMATION CODING XPRT GROUP)(IN DIGITAL MOD) (Only New Zealand) This feature is enabled only in New Zealand. - In New Zealand, pressing the Guide key will display MHG PG provided by New Zealand on the screen. This system has an MHG(Multimedia and hypermedia information coding expert group) to help your navigation through all the possible viewing options. Shows the present screen information. Displayed with a Teletext Programme. Displayed with a DTV Programme. Displayed with a Radio Programme. Displayed with a MHG Programme. Displayed with a AAC Programme. Aspect ratio of broadcasting programme. Aspect ratio of broadcasting programme. Displayed with a Subtitle Programme. Displayed with a Scramble Programme. Displayed with a Dolby Programme. 576i, 70p, 080i : Resolution of broadcasting programme Switch on MHG GUID Switch on the MHG. Select a programme Preview the Broadcast Programme Information. change to desired channel. The MHG will disappear after moving to a selected channel. MHG (MULTIMDIA AND HYPRMDIA INFORMATION CODING XPRT GROUP) 89

92 MHG (MULTIMDIA AND HYPRMDIA INFORMATION CODING XPRT GROUP)(IN DIGITAL MOD) Button Function in Listing Mode Select the Broadcast Programme Information. Select Channel. YLLOW Change to Next Week or Prev Day. BLU GUID Change to Next Day or Today. The MHG will disappear after moving to a selected channel. Change to Now/Next mode. PG/Guide Next Week 9 Switch off MHG. MHG (MULTIMDIA AND HYPRMDIA INFORMATION CODING XPRT GROUP) Button Function in NOW/NXT Mode You can view a channel being broadcasted and one scheduled to follow. GUID Detail information on or off. Select desired channel. The MHG will disappear after moving to a selected channel. Change to Listing mode. Switch off MHG. Detail information on or off. PG/Guide What s on now/next. Today TV ON Now.0pm Neighbours Next.00pm Jojo s Circus TV Now.0pm Neighbours Next.00pm Jojo s Circus TV Now.00pm Oprah Next.00pm Rugrats.pm Tue Feb C Now.00pm The Officaial NZ Top 0 Next.00pm Vodafone Select Live 5 Now.00am News : Te Kaea Next.00pm Advice: Ask Your Auntie 90

93 PICTUR CONTROL PICTUR SIZ (ASPCT RATIO) CONTROL You can watch the screen in various picture formats; 6:9, Just Scan, Original, :, :9, Zoom and Cinema Zoom. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using button. This function works in the following signal. Q. MNU Select Aspect Ratio. Select the desired picture format. You can also adjust Aspect Ratio in the PIC- TUR menu. For Zoom Setting, select :9, Zoom and Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes back to Q.Menu. 6:9 The following selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire screen(useful for viewing : formatted DVDs). Original When your TV receives a wide screen signal it will automatically change to the picture format broadcast. Original PICTUR CONTROL Just Scan Following Selection will lead to you view the picture of best quality without loss of original picture in high resolution image. Note : If there is noise in original Picture, You can see the noise at the edge. Just Scan 9

94 PICTUR CONTROL : The following selection will allow you to view a picture with an original : aspect ratio, black bars will appear on both the left and right of the screen. Zoom The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped. :9 You can view a picture format of :9 or a general TV programme in the :9 mode. The :9 screen is viewed in the same way as in :, but is magnified to the left and right. Cinema Zoom Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note:When enlarging or reducing the picture, the image may become distorted. PICTUR CONTROL F or G button: Adjust enlarge proportion of Cinema Zoom. The adjustment range is ~6. or D button: Move the screen.! NOT G You can only select :, 6:9 (Wide), :9, Zoom/Cinema Zoom in Component mode. G You can only select :, Original, 6:9 (Wide), :9, Zoom/Cinema Zoom in HDMI mode. G You can only select :, 6:9 (Wide) in RGB/HDMI-PC mode only. G In DTV(over 576p), HDMI/Component(over 70p) mode, Just Scan is available. 9

95 PICTUR WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the screen quality by easily following each stage. When you adjust the image to Low, Recommended or High, you can see the changed result as an example. In RGB input, the changed Colour, Tint, Horizontal Sharpness and Vertical Sharpness values are not applied. PICTUR Move Aspect Ratio : 6:9 Picture Wizard nergy Saving : Off Picture Mode : Standard Backlight 70 Contrast 90 Brightness 50 Sharpness 70 Picture Wizard With Picture Wizard, you can adjust the picture quality of the original image. Previous Next MNU Select PICTUR. Select Picture Wizard. Adjust Black level, White Level, Colour, T i n t, Horizontal Sharpness, Vertical Sharpness, Colour Temperature(only 7//7/55SL8***), Dynamic Contrast(only 7//7/55SL8***), Colour Gain(only 7//7/55SL8***) and Backlight. MARK FAV Select input source to apply the settings. If you stop the setting before the final stage, the changes will not be applied. The adjustment value is saved to xpert. Once the Picture Wizard sets the image quality, the nergy Saving is changed into Off. PICTUR CONTROL 5 Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 9

96 PICTUR CONTROL NRGY SAVING It reduces the TV s power consumption. The default factory setting complies with the nergy Star requirements and is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the nergy Saving level or by setting the Picture Mode. PICTUR Move PICTUR Move Aspect Ratio : 6:9 Picture Wizard nergy Saving :: Off Picture Mode : Standard Backlight 70 Contrast 90 Brightness 50 Sharpness 70 Aspect Ratio : 6:9 Picture Wizard nergy Saving :: Off Auto Picture Mode : Standard Off Backlight Minimum 70 Contrast Medium 90 BrightnessMaximum 50 SharpnessScreen 70 Off MNU Select PICTUR. PICTUR CONTROL Select nergy Saving. Select Auto(xcept for /6//7/LH***, /7/LH***, /6LU5***), Off, Minimum, Medium, Maximum or Screen Off. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. When selecting Screen off, TV turned off after seconds. If you adjust nergy Saving- Auto(xcept for /6//7/LH***, /7/LH***, /6LU5***), Minimum, Medium, Maximum, Backlight feature will not work. You can also adjust this feature by selecting nergy Saving button on the remote control. When selecting Auto, Backlight is automatically adjusted through intelligent sensor according to the surrounding condition when intelligent sensor is in the TV. 9

97 PRST PICTUR STTINGS Picture Mode-Preset Vivid Strengthen the contrast, brightness, colour and sharpness for vivid picture. Standard The most general screen display status. Natural The most natural screen display status. Cinema Optimizes video for watching movies. Sport Optimizes video for watching sports events. Game Optimizes video for playing games. PICTUR Move Aspect Ratio : 6:9 Picture Wizard nergy Saving : Off Picture Mode :: Standard Backlight 80 Contrast 90 Brightness 50 Sharpness 60 PICTUR Move Aspect Ratio : 6:9 Picture Wizard nergy Saving : Off Intelligent Sensor Vivid Picture Mode :: Standard Standard Backlight Natural 80 ContrastCinema 90 Brightness Sport 50 Sharpness Game 60 xpert xpert MNU Select PICTUR. Select Picture Mode. Select Intelligent Sensor (xcept for /6//7/LH***, /7/LH***, /6LU5***), Vivid, Standard, Natural, Cinema, Sport or Game. PICTUR CONTROL Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture Mode menu based on the programme category. When the Intelligent sensor function is on, the most suitable picture is automatically adjusted according to the surrounding conditions. (xcept for /6//7/LH***, /7/LH***, /6LU5***) You can also adjust Picture Mode in the Q. Menu. Intelligent Sensor: Adjusts picture according to the surrounding conditions. (xcept for /6//7/LH***, /7/LH***, /6LU5***) 95

98 PICTUR CONTROL MANUAL PICTUR ADJUSTMNT Picture Mode-User option Backlight To control the brightness of the screen, adjust the brightness of LCD panel. Adjusting the backlight when setting the brightness of the set is recommended. Contrast Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated. Brightness Adjusts the base level of the signal in the picture. Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Colour Adjusts intensity of all colours. Tint Adjusts the balance between red and green levels. It is not available to use this function in Intelligent Sensor (xcept for /6//7/LH***, /7/LH***, /6LU5***). PICTUR CONTROL MNU 5 PICTUR Aspect Ratio : 6:9 Picture Wizard nergy Saving : Off Picture Mode :: Standard Backlight 70 Contrast 90 Brightness 50 Sharpness 70 Select PICTUR. Move Select Picture Mode. Select Vivid, Standard, Natural, Cinema, Sport or Game. Select Backlight, Contrast, Brightness, Sharpness, Colour or Tint. Make appropriate adjustments. PICTUR Move Aspect Ratio : 6:9 Intelligent Sensor Picture Wizard nergy Saving : Off Vivid Standard Picture Mode Natural :: Standard Cinema Backlight 80 Contrast Sport 90 Game Brightness 50 Sharpness xpert 60 xpert Benefits of using Backlight - The electricity consumption is reduced by up to 60%. - The black brightness is reduced. (As the black has greater depth, you can enjoy a better quality definition.) - You can adjust brightness with maintaining original signal resolution. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 96! NOT G You cannot adjust colour, sharpness and tint in the RGB/HDMI-PC mode. G When the xpert / is selected, you can select Backlight, Contrast, Brightness, H Sharpness, V Sharpness, Colour or Tint.

99 PICTUR IMPROVMNT TCHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the Picture Reset function for each Picture Mode. Image shown may differ from your TV. PICTUR Move PICTUR Colour Temperature Move F Medium G Screen Contrast 90 Brightness 50 Sharpness 70 Colour 60 Tint 0 Advanced Control Picture Reset R G Screen Contrast Dynamic 90 Contrast Brightness Dynamic 50 Colour Sharpness Noise Reduction 60 R G R G Colour Gamma 60 Tint 0 R Black Level Advanced Control ye Care Picture Reset Real Cinema TruMotion 00HZ G Medium Low Medium Medium Auto Off On Low Close MNU Select PICTUR. Select Advanced Control. Select your desired Source.: Colour Temperature, Dynamic Contrast, Dynamic Colour, Noise Reduction, Gamma, Black Level, ye Care, Real Cinema, TruMotion 00Hz(Only LH5***, /7SL9***), TruMotion 00Hz(Only 7//7/55LH5***, /7LH9***, 7//7/55SL8***), Colour Gamut, dge nhancer, xvycc(xcept for /6//7/LH***, /6LU5***) oropc(xcept for LH***, /7LH9***).(Refer to p. 99~00) Make appropriate adjustments. PICTUR CONTROL Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 97

100 PICTUR CONTROL XPRT PICTUR CONTROL By segmenting categories, xpert and xpert provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used to help a professional optimize the TV performance using specific videos. Image shown may differ from your TV. PICTUR Move Aspect Ratio : 6:9 Intelligent Sensor Picture Wizard nergy Saving : Off Vivid Standard Picture Mode :: Standard xpert Natural Cinema Backlight 80 Contrast Sport 90 Game Brightness 50 xpert H Sharpness 60 xpert PICTUR Screen Dynamic Contrast F Off G Move Noise Reduction Off Contrast 90 Gamma Brightness R G 50 Medium R G Black Level Sharpness 60 Real Colour Cinema 60 Auto On TruMotion Tint 00HZ 0 Colour xpert Standard Control Picture Reset Colour Gamut dge nhancer Close RLow G SD Standard High PICTUR CONTROL MNU Select PICTUR. Select Picture Mode. Select xpert or xpert. 5 6 Select xpert Control. Select your desired Source. Make appropriate adjustments. Press the MNU button to return to normal TV viewing. 98 Press the RTURN button to move to the previous menu screen.

101 *This feature is not available for all models. Colour Temperature [Advanced Control] (Warm/Medium/Cool) Dynamic Contrast (Off/Low/Medium/High) Dynamic Colour (Off/Low/High ) Noise Reduction (Off/Low/Medium/High) Gamma (Low/Medium/High) Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to make picture bluish. Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid. Reduces screen noise without compromising video quality. You can adjust brightness of dark area and middle gray level area of the picture. Low : Make dark and middle gray level area of the picture brighter. Medium: xpress original picture levels. High: Make dark and middle gray level area of the picture darker. Black Level (Low/High) ye Care (On/Off) Real Cinema (On/Off) Low : The picture of the screen gets darker. High : The picture of the screen gets brighter. Auto : Realizing the black level of the screen and set it to High or Low automatically. Set black level of the screen to proper level. This function enables to select 'Low' or 'High' in the following mode: AV(NTSC-M), HDMI or Component. Otherwise, 'Black level' is set to 'Auto'. *This feature is not available for all models. Adjust the brightness of the screen to prevent the screen from being too bright. Dims extremely bright pictures. This feature is disable in Picture Mode-Vivid, Cinema, Intelligent Sensor. You can watch a cinema-like video by eliminating judder effect. Use this function when you watch movies. This function can work when TruMotion is off. PICTUR CONTROL TruMotion 00Hz/00Hz (Off/Low/High ) *This feature is not available for all models. High : Provides smoother picture movement. Low : Provides smooth picture movement. Use this setting for standard use. Off : Use this setting when "High" and "Low" setting result in noise. TruMotion 00Hz can reduce perception of blur on fast moving scenes by displaying one hundred images per second. TruMotion 00Hz displays 00 scenes per second by combining advanced 00Hz technology with scanning backlight. This technology is verified from intertek & TüV Rheinland. It is used for the best picture quality without any motion blur or judder when you enter a quick image or Film Source. This feature is disable in RGB-PC, HDMI-PC mode. If you enable "TruMotion 00Hz or TruMotion 00Hz", noise may appear on the screen. If this occurs, set "TruMotion 00Hz or TruMotion 00Hz" to "Off". 99

102 PICTUR CONTROL Colour Gamut (Wide/Standard) dge nhancer (Off/Low/High) xvycc (Auto/off/on) Standard : Mode to reproduce original colour according to the standard of input signal independent of the display characteristics. Wide: Mode to use and set the rich colour area of the display. Maximize the utilization for colour area that can be expressed. *This feature is not available for all models. Shows clearer and distinctive yet natural corners of the video. This function is enabled in Picture Mode - Cinema, xpert. This is the function to express richer colour. This function is enabled in "Picture mode - Cinema, xpert" when xvycc signal is inputted through HDMI OPC (On/Off) Colour Standard (SD/HD) xpert Pattern (Off/xpert/xpert) *This feature is not available for all models. As the technology to reduce the power consumption while keeping the same brightness, this has the effect of reducing power consumption, improvement in contrast. Converts the colour of a different video to HD colour. This function is set for SD video (BT-60) and HD video (BT-709) colour format. This is the pattern necessary for expert adjustment. This function is enabled in "Picture Mode - xpert" when you watch DTV. PICTUR CONTROL Colour Filter (Off/Red/Green/Blue) Colour Temperature [xpert Control] (Medium/Warm/Cool) This is the function to filter the specific colours of the video. You can use the RGB filter to set colour saturation and hue accurately. This is the function to adjust the overall colour of the screen to the feeling you want. a. Method : Points Pattern: Inner, Outer Red/Green/Blue Contrast, Red/Green/Blue Brightness: The adjustment range is -50 ~ +50. b. Method : 0 point IR Pattern: Inner / Outer IR (Institute of Radio ngineers) is the unit to display the size of the video signal and can be set among 0, 0, You can adjust Red, Green or Blue according to each setting. Luminance: This function displays calculated luminance value for. gamma. You can input luminance value you want at 00 IR, than the target luminance value for. gamma is displayed at every 0 steps from 0 IR to 90 IR. Red/Green/Blue: The adjustment range is -50 ~ Colour Management System As the tool used by the experts to make adjustments by using the test patterns, this does not affect other colours but can be used to selectively adjust the 6 colour areas (Red/Green/Blue/Cyan/Magenta/Yellow). Colour difference may not be distinctive even when you make the adjustments for the general video. Adjusts Red/Green/Blue/Yellow/Cyan/Magenta. Red/Green/Blue/Yellow/Cyan, Magenta Colour : The adjustment range is -0 ~ +0. Red/Green/Blue/Yellow/Cyan/Magenta Tint : The adjustment range is -0 ~ +0. This feature is disable in RGB-PC and HDMI (PC) mode.

103 PICTUR RST Settings of the selected picture modes return to the default factory settings. PICTUR Screen Contrast 90 Move Brightness 50 Sharpness 70 Colour 60 Tint 0 R Advanced Control Picture Reset G PICTUR Screen Contrast 90 Move Brightness 50 Sharpness 60? All picture setting will be resetted. Colour 60 continue? Tint 0 Advanced Control Yes Picture Reset R G No MNU Select PICTUR. Select Yes or No. Select Picture Reset. Initialize the adjusted value. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. LD LOCAL DIMMING (Only /7LH9***) Use this feature to see the difference LD Local Dimming makes. PICTUR Move PICTUR Brightness 50 Brightness 50 Sharpness 70 Sharpness 70 Colour 60 Colour 60 Tint 0 R G Tint 0 R Advanced Control Advanced Control Picture Reset Picture Reset Screen Screen Off LD Local Dimming :: Off LD Local Dimming :: Off On Move G PICTUR CONTROL MNU Select PICTUR. Select LD Local Dimming. Select O n or Off. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 0

104 PICTUR CONTROL POWR INDICATOR (xcept /6LU5***, /6LH***) It helps you adjust the brightness of moving LD and sound when power is turned on. Standby Light Determines whether to set the indicator light on the front of the TV to O n or Off in standby mode. Power Light Determines whether to set the indicator light on the front of the TV to O n or Off when the power turns on. OPTION SIMPLINK Key Lock Move : On : Off Simple Manual Set ID : Power Indicator Demo Mode : On Mode Setting : Store Demo Factory Reset OPTION SIMPLINK Key Lock Simple Manual Set ID : Power Indicator Demo Mode Mode Setting Factory Reset Move : On : Off Standby : On Light F On G : Store Demo Power Light On Close PICTUR CONTROL MNU Select OPTION. Select Power Indicator. Select Standby Light or Power Light. Select your desired Source. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 0

105 DMO MOD Display the slide show to explain the various logo of this TV. It is not possible to use Demo Mode in Home Use mode. In Store Demo, Demo Mode is automatically set to O n. Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is reset. The screen is reset automatically after 5 minutes in Demo Mode. OPTION Move OPTION Move SIMPLINK Key Lock : On : Off SIMPLINK Key Lock : On : Off Simple Manual Set ID : Simple Manual Set ID : Power Indicator Demo Mode : On Power Indicator Demo Mode Off : On Mode Setting : Store Demo Mode Setting On : Store Demo Factory Reset Factory Reset MNU Select OPTION. Select Demo Mode. PICTUR CONTROL Select O n to show the various logo of TV. Return to TV viewing. If you want to stop the demo, press any button. (except for MUT, +, - button) Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 0

106 PICTUR CONTROL MOD STTING We recommend setting the TV to Home Use mode for the best picture in your home environment. Store Demo mode is an optimal setting for displaying at stores.. Image shown may differ from your TV. OPTION Move OPTION Move SIMPLINK Key Lock : On : Off Simple Manual Set ID : Power Indicator Demo Mode : On Mode Setting :: Store Demo Factory Reset SIMPLINK : On Key Lock : Off Simple Manual Set ID Selecting : the environment. Power Indicator Demo Mode Choose the setting mode you want. : On Mode Setting : Store Store Demo Demo Home Use Factory Reset Select [Home Use] to use this TV at home. To use this TV at store, select [Store Demo]. PICTUR CONTROL MNU Select OPTION. Select Mode Setting. Select Store Demo or Home Use. Save. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 0

107 SOUND & LANGUAG CONTROL AUTO VOLUM LVLR AVL automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each programme. If sound quality or volume is not at the level you want, it is recommended to use a separate home theater system or amp to cope with different user environments. AUDIO Move AUDIO Move Auto Volume :: Off Auto Volume : : Off Off Clear Voice II : Off Clear Voice II : Off On Level - + Level - + Balance 0 L R Balance 0 L R Sound Mode : Standard SRS TruSurround XT Treble 50 Bass 50 Sound Mode : Standard : Off SRS TruSurround XT : Off Treble 50 Bass 50 MNU Select AUDIO. Select Auto Volume. Select O n or Off. SOUND & LANGUAG CONTROL Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 05

108 SOUND & LANGUAG CONTROL CLAR VOIC II By differentiating the human sound range from others, it helps users listen to human voices better. AUDIO AUDIO Move Move Auto Volume : Off Auto Volume : Off Clear Voice II II :: Off Clear Voice II : Off Off Level Level On Balance 0 L R Balance 0 L R Sound Mode : Standard Sound Mode : Standard SRS TruSurround XT : Off SRS TruSurround XT : Off Treble 50 Treble 50 Bass 50 Bass 50 SOUND & LANGUAG CONTROL MNU Adjustment for Clear Voice Level With selecting On 5 Select AUDIO. Select Clear Voice II. Select O n or Off. Select Level. Make desired adjustment. If you select O n for Clear Voice II, SRS TruSurround XT feature will not work. Select levels from -6 to +6. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 06

109 PRST SOUND STTINGS-SOUND MOD You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust the Treble, Bass. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory. Standard Music Cinema Sport Game Offers standard-quality sound. Optimizes sound for listening to music. Optimizes sound for watching movies. Optimizes sound for watching sports events. Optimizes sound for playing games. AUDIO Move AUDIO Move Auto Volume : Off Auto Volume : Off Clear Voice II : Off Clear Voice II : Off Level - + Level - + Balance 0 L R Balance 0 L R Sound Mode : Standard Sound Mode :: Standard Standard SRS TruSurround XT Music : Off SRS TruSurround XT - : Off + Treble Bass Cinema 50 Treble Sport 50 Bass Game MNU Select AUDIO. Select Sound Mode. Select Standard, Music, Cinema, Sport or Game. You can also adjust Sound Mode in the Q. Menu. SOUND & LANGUAG CONTROL Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 07

110 SOUND & LANGUAG CONTROL SOUND STTING ADJUSTMNT -USR MOD AUDIO Move AUDIO Move Auto Volume : Off Auto Volume : Off Clear Voice II : Off Clear Voice II : Off Level - + Level - + Balance 0 L R Balance 0 L R Standard (User) Sound Mode : : Standard (User) Sound Mode :: Standard (User) Music SRS TruSurround XT : Off SRS TruSurround XT : Cinema Off Treble 50 Treble 50 Bass 50 Bass 50 Sport Game MNU Select AUDIO. Select Sound Mode. Select Standard, Music, Cinema, Sport or Game. Select Treble or Bass. SOUND & LANGUAG CONTROL 5 Set the desired sound level. SRS TRUSURROUND XT MNU Select this option to sound realistic. Select AUDIO. Select SRS TruSurround XT. Select O n or Off. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. SRS TruSurround XT : TruSurround XT is a patented SRS technology that solves the problem of playing 5. multichannel content over two speakers. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. G is a trademark of SRS Labs, Inc. G TruSurround XT technology is incorporated under license from SRS Labs, Inc. 08

111 BALANC You can adjust the sound balance of the speakers to preferred levels. AUDIO Move Auto Volume : Off Clear Voice II : Off Level - + Balance 0 L R Sound Mode : Standard SRS TruSurround XT : Off Treble 50 Bass 50 AUDIO Move Auto Volume : Off Clear Voice II : Off Level L- R+ Balance Balance 0L 0 L 0 R R F L R Sound Mode : Standard Close SRS TruSurround XT : Off Treble 50 Bass 50 G MNU Select AUDIO. Select Balance. Make desired adjustment. SOUND & LANGUAG CONTROL Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 09

112 SOUND & LANGUAG CONTROL TV SPAKRS ON/ OFF STUP You can adjust the TV internal speaker status. In A V, COMPONNT, RGB and HDMI with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system, turn off the TV s internal speakers. AUDIO Move AUDIO Move Balance 0 Sound Mode : Standard SRS TruSurround XT Treble 50 Bass 50 Reset L R Balance 0 L R Sound Mode : Standard : Off SRS TruSurround XT : Off Treble 50 Bass 50 Reset Digital Audio Out : PCM Digital Audio Out : PCM TV Speaker : On Off TV Speaker : On Off Off On MNU Select AUDIO. SOUND & LANGUAG CONTROL! NOT Select TV Speaker. Select O n or Off. G When the TV speaker is turned off while the Simplink home theater is operating, the sound output automatically switches to the Home theater speaker, but when the TV speaker is turned on, the sound output the TV speaker. G In TV Speaker menu, if you select Off, some audio menu may not work. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 0

113 SLCTING DIGITAL AUDIO OUT This function allows you to select your preferred Digital Audio Output. The TV can only output Dolby Digital if a channel is broadcast with Dolby Digital audio. When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace) output to Dolby Digital. When Dolby Digital is not available, although Auto is selected in the Digital Audio Out menu, SPDIF output will be PCM(Pulse-code modulation). ven if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby Digital Audio, only Dolby Digital will be played. AUDIO Move AUDIO Move Balance 0 Sound Mode : Standard SRS TruSurround XT : Off Treble 50 Bass 50 Reset Digital Audio Out : : PCM TV Speaker : On L R Balance 0 L Sound Mode : Standard SRS TruSurround XT : Off Treble 50 Bass 50 Reset Digital Audio Out : : PCM Auto TV Speaker : On PCM R MNU Select AUDIO. Select Digital Audio Out. Select Auto or PCM. Manufactured under license from Dolby Laboratories. Dolby and the double-d symbol are trademarks of Dolby Laboratories. There is a possibility that when HDMI mode, some DVD players do not make SPDIF sound. At that time, set the output of the digital audio of the DVD player to PCM. (In HDMI, Dolby Digital Plus is not supported). Item Auto(Speaker On) Auto(Speaker Off) PCM Audio Input MPG DD DD+ H-AAC MPG DD DD+ H-AAC PCM Digital Audio output PCM DD DD PCM PCM DD DD DD PCM SOUND & LANGUAG CONTROL Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen.

114 SOUND & LANGUAG CONTROL AUDIO RST Settings of the selected Sound Mode return to the default factory settings. AUDIO Balance 0 Move Sound Mode : Standard SRS TruSurround XT : Off Treble 50 Bass 50 Reset Digital Audio Out : PCM TV Speaker : On L R AUDIO Balance 0 Move L R Sound Mode : Standard SRS TruSurround XT : Off Treble 50 Bass 50 i Resetting Reset sound mode configuration... Digital Audio Out : PCM TV Speaker : On MNU Select AUDIO. Select Reset. SOUND & LANGUAG CONTROL Initialize the adjusted value. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen.

115 STRO RCPTION (IN ANALOGU MOD ONLY) When a programme is selected, the sound information for the station appears with the programme number and station name. Q. MNU Select Audio. Select the sound output. Broadcast Mono Stereo NICAM (Only Singapore, New Zealand and Indonesia) On Screen Display MONO STRO NICAM (Only Singapore, New Zealand and Indonesia) A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved. SPAKR SOUND OUTPUT SLCTION In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers. Select the sound output. L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input is sent to the right loudspeaker. L+L: Audio signal from audio L input is sent to left and right loudspeakers. R+R: Audio signal from audio R input is sent to left and right loudspeakers. SOUND & LANGUAG CONTROL

116 SOUND & LANGUAG CONTROL COUNTRY SLCTION (ONLY AUSTRALIA & NW ZALAND) The installation guide menu appears on the TV screen when it is switched on for the first time. Select your country. * If you want to change Country selection MNU Select OPTION. Select Country. Select your desired country. SOUND & LANGUAG CONTROL! Save. NOT Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. G If you do not finish the set-up Installation Guide by pressing RTURN or if you time out on the OSD (On Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on. G If you select the wrong local country, teletext may not appear correctly on the screen and some problems may occur during teletext operation. G DTV mode control buttons may not function based on country broadcasting circumstances. G In country that Digital broadcasting regulation isn t fixed, some DTV function may not work depending on digital broadcasting circumstances.

117 LANGUAG SLCTION (IN DIGITAL MOD ONLY) The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed. When the languages you selected as the primary for Audio Language and Subtitle Language are not supported, you can select language in secondary category. MNU Select OPTION. MNU Select OPTION. Select Audio Language or Subtitle Language. Select Hard of Hearing( ). Select your desired language. Select O n or Off. Save.! NOT G It is only available to use Hard of Hearing on some TV stations in New Zealand. < Audio Language Selection > G When two or more audio languages are broadcast, you can select the audio language. Q. MNU Select Audio Select an audio language. Press the RTURN button to move to the previous menu screen. Display N.A Audio Language OSD Information Status Not Available MPG Audio Dolby Digital Audio Audio for Visual Impaired Audio for Hearing Impaired Dolby Digital Plus Audio AAC Audio Select L+R, L+L or R+R. SOUND & LANGUAG CONTROL < Subtitle Language Selection > G When two or more subtitle languages are broadcast, you can select the subtitle language with the SUBTITL button on the remote control. G Press the button to select a subtitle language. Subtitle Language OSD Information Display N.A Status Not Available Teletext Subtitle Subtitle for Hard of Hearing - The audio/subtitles can be displayed in a simpler form with to characters broadcast by the service provider. - When you select supplementary Audio (Audio for Visual/Hearing Impaired ) the TV may output a part of the Main audio. 5

118 TIM STTING CLOCK STUP The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no DTV signal.) You must set the time correctly before using on/off timer function. < Only Australia > When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal. Once Clock is set in DTV mode, you cannot change time, but if the city name in Time Zone is changed into offset, you can change time by hour. TIM Clock Off Time On Time Sleep Timer : Off : Off : Off Move TIM Clock Off Time On Time Sleep Timer : Off : Off : Off Move Date 0 Month Mar Year 008 Hour 6 Minute 09 Time Zone WA GMT+9.0 Close (Only Australia) MNU Select TIM. TIM STTING Select Clock. Select either the year, month, date, time or Time Zone(Only Australia). Set the year, month, date, time or Time Zone(Only Australia) option. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 6

119 AUTO ON/OFF TIM STTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. The Off time function overrides the On time function if both are set to the same time. The TV must be in standby mode for the On time to work. TIM Move TIM Move Clock Off Time On Time Sleep Timer : Off : Off : Off Clock Off Time On Time Sleep Timer : Off : Off : Off Mar :09 Repeat F Off G Hour 00 Minute 00 Input Programme Antenna TV Volume 0 Close MNU Select TIM. Select Off Time or On Time. To cancel On/Off Time function, select Off. For On Time function only Select Input. 5 Select Repeat. Select Off, Once, Daily, Mon ~ Fri, Mon ~ Sat, Sat ~ Sun or Sun. Set the hour. Select Antenna, A V, Component, RGB or HDMI. Set the programme. Adjust volume level at switch-on. TIM STTING 6 Set the minutes. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 7

120 TIM STTING SLP TIMR STTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. Q. MNU Select Sleep Timer. Select Off, 0, 0, 0, 6 0, 9 0, 0, 80 or 0 min.. When you switch the TV off, the preset sleep timer is cancelled. You can also adjust Sleep Timer in the TIM menu. TIM STTING 8

121 PARNTAL CONTROL / RATINGS ST PASSWORD & LOCK SYSTM nter the password, press 0, 0, 0, 0 on the remote control handset. If a channel is locked, enter the password to unlock it temporarily. LOCK Move LOCK Move Lock System : Off Lock System Off :: Off Set Password Block Programme Parental Guidance : Blocking Off Set Password Block Programme Parental Guidance On : Blocking Off Input Block Input Block MNU Select LOCK. If you forget your password, press 7, 7, 7, 7 on the remote control handset. Select Lock System Select O n. Set the password. Input a -digit password. Be sure to remember this number! Re-enter new password for confirm. Press the MNU button to return to normal TV viewing. PARNTAL CONTROL / RATINGS Press the RTURN button to move to the previous menu screen. 9

122 PARNTAL CONTROL / RATINGS BLOCK PROGRAMM Blocks any programme that you do not want to watch or that you do not want your children to watch. It is available to use this function in Lock System O n. nter a password to watch a blocked programme. TN Digital DTV RADIO TV LOCK Lock System Set Password Block Programme Parental Guidance Input Block Move : Off : Blocking Off TN Digital ABC TV Sydney 7 7 Digital 9 Nine Digital 0 TN Digital TN Guide TN HD 0 ABC HDTV ABC ABC TV 70 7 HD Digital 7 7 Digital 7 7 Digital 7 7 Digital 77 7 Guide 90 Nine Digital HD Pr. Change Navigation P Page Change Previous Block/Unblock MNU Select LOCK. Select Block Programme. nter the Block Programme. PARNTAL CONTROL / RATINGS GRN Select a programme to be locked. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 0

123 PARNTAL CONTROL (IN DIGITAL MOD ONLY) This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This set is programmed to remember which option it was last set to even if you switch the set off. Prevents children from watching certain adult s TV programmes, according to the ratings limit set. nter a password to watch a blocked programme. LOCK Move LOCK Move Lock System Set Password Block Programme Parental Guidance Input Block : Off : Blocking Off Lock System Blocking : Off Off : Permits all programmes Set Password Block Programme Block All Parental Guidance G : Blocking Off Input Block PG M MA AV R Blocking Off Blocking Off : Permits all programmes 0 and above and above and above and above and above 5 and above 6 and above 7 and above 8 and above Blocking Off (Only Australia & New Zealand) (Only Singapore and Indonesia) MNU Select LOCK. Select Parental Guidance. Save. Make appropriate adjustments. Press the MNU button to return to normal TV viewing. PARNTAL CONTROL / RATINGS Press the RTURN button to move to the previous menu screen.

124 PARNTAL CONTROL / RATINGS XTRNAL INPUT BLOCKING nables you to block an input. It is available to use this function in Lock System O n. LOCK Move LOCK Move Lock System Set Password Block Programme Parental Guidance Input Block : Off : Blocking Off Lock System : Off AV F Off G Set Password Block Programme AV Off Parental Guidance Component : Blocking Off Off Input Block Component Off RGB Off (xcept for /6//7/LH***, LU5***) (xcept for /6//7/LH***, /7/LH***, /6LU5***) HDMI Off HDMI HDMI HDMI Close Off Off Off (xcept for /6//7/LH***, LU5***) (Only /7//7/55LH5***, /7LH9***, 7//7/55SL8***) MNU Select LOCK. Select Input Block. PARNTAL CONTROL / RATINGS 5 Save. Select input source. Select O n or Off. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen.

125 KY LOCK The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing. OPTION Move OPTION Move Audio Language : nglish Subtitle Language : nglish Hard of Hearing( ) : Off Country : Australia Input Label SIMPLINK : On Key Lock : Off Simple Manual Audio Language : nglish Subtitle Language : nglish Hard of Hearing( ) : Off Country : Australia Input Label SIMPLINK : On Key Lock Off : Off : Off Simple Manual On MNU Select OPTION. Select Key Lock. Select On or Off. In Key Lock O n, if the TV is turned off, press the r / I, INPUT, P D or (or P ) button on the TV or POWR INPUT, P or NUMBR buttons on the remote control then the set will be turned on. With the Key Lock On, the display Key Lock On appears on the screen if any button on the front panel is pressed while viewing the TV. Save. Press the MNU button to return to normal TV viewing. PARNTAL CONTROL / RATINGS Press the RTURN button to move to the previous menu screen.

126 i TLTXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. AV MOD POWR NRGY SAVING The teletext decoder of this TV can support the SIMPL, TOP and FASTXT systems. SIMPL (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTXT are more modern methods allowing quick and easy selection of teletext information. LIST MUT Q.VIW SWITCH ON/OFF Press the TXT button to switch to teletext. The initial page or last page viewed appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the TXT button to switch off teletext. The previous mode reappears. MNU RTURN / XIT Q.MNU INFO GUID FAV MARK RATIO AV MOD SIMPL TXT A Page selection nter the desired page number as a three digit number with the NUMBR buttons. If during selection you press a wrong number, you must complete the three digit number and then re-enter the correct page number. The P button can be used to select the preceding or following page. TOP TXT The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. TLTXT A Block / group / page selection With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the P button can be used. The red button returns to the previous selection. Alternatively the P button can be used. A Direct page selection As with SIMPL teletext mode, you can select a page by entering it as a three digit number using the NUMBR buttons in TOP mode.

127 FASTXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. A Page selection Press the T. OPT button and then use button to select i menu. Display the index page. You can select the pages which are colour coded along the bottom line with corresponding coloured buttons. AS with SIMPL teletext mode, you can select a page by entering its three digit page number with the NUM- BR buttons in FASTXT mode. The P button can be used to select the preceding or following page. SPCIAL TLTXT FUNCTIONS Press the T. OPT button and then use button to select the Text Option menu. i A Index Select the each index page. A Time When viewing a TV programme, select this menu to display the time at the top right hand corner of the screen. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RD/GRN, or NUMBR buttons. Text Option Index Time Hold Reveal Update Close A Hold Stops the automatic page change which will occur if a teletext page consists of or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this menu is selected the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inactive.? A Reveal Select this menu to display concealed information, such as solutions to riddles or puzzles. TLTXT A Update Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then display will change to the page number. Select this menu again to view the updated teletext page. 5