PLASMA TV OWNER S MANUAL

Transcription

1 NGLISH PLASMA TV OWNR S MANUAL PLASMA TV MODLS PQ0** 50PQ0** PQ** 50PQ** PQ0** 50PQ0** PQ0** 50PQ0** PQ60** 50PQ60** 50PS0** 50PS60** 60PS0** Trade Mark of the DVB Digital Video Broadcasting Project (99 to 996) ID Number(s): 655 : PQ000-ZA 659 : 50PQ000-ZA 660 : PQ000-ZD 66 : 50PQ000-ZD 66 : PQ00-Z 66 : 50PQ00-Z 60: PQ000-ZA 60 : PQ00-ZB 60: 50PQ000-ZA 69 : 50PQ00-ZB 605: PQ000-ZA 600: 50PQ000-ZA 606: PQ6000-ZA 609: 50PQ6000-ZA 6 : 50PS000-ZB 6: 50PS6000-ZC 6609 : 60PS000-ZA Please read this manual carefully before operating your TV. Retain it for future reference. Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring any service. This product qualifies for NRGY STAR in the factory default (Home Use mode) setting and this is the setting in which power savings will be achieved. Changing the factory default picture setting or enabling other features will increase power consumption that could exceed the limits necessary to qualify for nergy Star rating.

2 HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

3 MNU i RTURN / XIT FAV FRZ ACCSSORIS nsure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. Image shown may differ from your TV. Owner's Manual LIST LIST Q.VIW MUT MUT Q.VIW AV V MOD MOD NRGY POWR NRGY SAVING VING or RATIO NRGY SAVING ACCSSORIS Q.MNU INFO GUID MARK Owner s Manual Batteries Remote Control x x Power Cord Protection Cover (Refer to p.8) Bolts for stand assembly (Refer to p.8) (xcept for 60PS0**) Cable Holder (Refer to p.8) Ferrite Core (This item is not included for all models.) Cable management clip (Refer to p.8) (Only 60PS0**) Wall Mounting Bracket (Separate purchase) This item is not included for all models. AW-50PG60MS (xcept for 60PS0**) AW-60PG60MS (Only 60PS0**) Polishing Cloth Polishing cloth for use on the screen. * Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth. Do not use excessive force. This may cause scratching or discolouration. Use of ferrite core (This item is not included for all models.) Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord. The closer the location of the ferrite core to the power plug, the better it is. Install the power plug closely.

4 CONTNTS CONTNTS ACCSSORIS PRPARATION Front Panel Controls Back Panel Information Stand Installation Back Cover for Wire Arrangement Desktop Pedestal Installation Careful installation advice Wall Mount: Horizontal Installation Antenna Connection Swivel Stand XTRNAL QUIPMNT STUP Input List Data Service Input Label AV Mode Simple manual Initializing (Reset to original factory settings)...5 TO US A USB DVIC When connecting a USB device Photo List Music List Movie List DivX Registration Code Deactivation HD Receiver Setup DVD Setup VCR Setup Insertion of CI Module Digital Audio Out Setup Other A/V Source Setup Usb Setup PC Setup Screen Setup for PC Mode WATCHING TV / PROGRAMM CONTROL Remote Control Key Functions Turning on the TV Programme Selection Volume Adjustment Quick Menu On-Screen Menus Selection and Adjustment.. Auto Programme Tuning Manual Programme Tuning (In Digital Mode).. 6 Manual Programme Tuning (In Analogue Mode).. 7 Programme dit Software Update Diagnostics CI[COMMON INTRFAC] INFORMATION... Selecting the Programme Table PG (LCTRONIC PROGRAMM GUID) (IN DIGITAL MOD) - Switch on/off PG Select Programme Button Function in NOW/NXT Guide Mode.68 - Button Function in 8 Day Guide Mode Button Function in Date Change Mode Button Function in xtended Description Box Button Function in Record/Remind Setting Mode.70 - Button Function in Schedule List Mode PICTUR CONTROL Picture Size (Aspect Ratio) Control NRGY SAVING / POWR SAVING Preset Picture Settings - Picture Mode-Preset Manual Picture Adjustment - Picture Mode-User option Picture Improvement Technology xpert Picture Control

5 Picture Reset Image Sticking Minimization (ISM) Method... 8 Demo Mode Mode Setting SOUND & LANGUAG CONTROL Auto Volume Leveler Preset Sound Settings - Sound Mode Sound Setting Adjustment -User Mode SRS TruSurround XT Clear Voice II Balance TV Speakers On/ Off Setup Selecting Digital Audio Out Audio Reset Audio description I/II - Stereo/Dual Reception (In Analogue Mode Only) NICAM Reception (In Analogue Mode Only) Speaker Sound Output Selection On-Screen Menu Language/Country Selection.. 95 Language Selection (In Digital Mode only) TLTXT Switch on/off SIMPL Text TOP Text FASTXT Special Teletext Functions DIGITAL TLTXT Teletext within Digital Service Teletext in Digital Service APPNDIX Troubleshooting Maintenance Product Specifications IR Codes xternal Control Device Setup CONTNTS TIM STTING Clock Setup Auto On/ Off Timer Setting Sleep Timer Setting PARNTAL CONTROL / RATINGS Set Password & Lock System Block Programme Parental Control Input Block Key Lock

6 PRPARATION FRONT PANL CONTROLS Image shown may differ from your TV. PRPARATION CAUTION G When the TV cannot be turned on with the remote control, press the main power button on the TV (When the power is turned off with the main power button on the TV, it will not be turned on with the remote control.) /50PQ**, /50PQ0**, 50PS0** Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions. (xcept for /50PQ**) Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on. INPUT MNU P INPUT MNU VOLUM PROGRAMM POWR /50PQ0**, /50PQ0** Intelligent Sensor (xcept for /50PQ0**) Adjusts picture according to the surrounding conditions Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on. INPUT MNU P INPUT MNU VOLUM PROGRAMM POWR

7 /50PQ60**, 50PS60** P P PROGRAMM VOLUM PRPARATION Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. The LD is off while the TV remains on. Intelligent Sensor Adjusts picture according to the surrounding conditions MNU INPUT MNU INPUT POWR 60PS0** Remote Control Sensor POWR Power/Standby Indicator illuminates red in standby mode. illuminates green when the TV is switched on. INPUT MNU - + P INPUT MNU VOLUM PROGRAMM 5

8 PRPARATION BACK PANL INFORMATION A Image shown may differ from your TV. /50PQ0**, /50PQ** PRPARATION 7 USB IN SRVIC ONLY 8 HDMI IN (CONTROL & SRVIC) 5 6 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. 5 RS-C IN (CONTROL & SRVIC) PORT Connect to the RS-C port on a PC. This port is used for Service or Hotel mode. OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable. uro Scart Socket (AV/AV) Connect scart socket input or output from an external device to these jacks Antenna Input Connect RF antenna to this jack. PCMCIA (Personal Computer Memory Card International Association) Card Slot Insert the CI Module to PCMCIA CARD SLOT. (This feature is not available in all countries.) SRVIC ONLY PORT HDMI Input Connect an HDMI signal to HDMI IN. 6

9 /50PQ0**, /50PQ0**, /50PQ60**, 50PS0**, 50PS60**, 60PS0** 0 PRPARATION HDMI IN HDMI/DVI IN VIDO L/MONO AUDIO R S-VIDO HDMI IN 5 AV IN Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. RGB/DVI Audio Input Connect the audio from a PC or DTV. 7 8 RS-C IN (CONTROL & SRVIC) PORT Connect to the RS-C port on a PC. This port is used for Service or Hotel mode. Component Input Connect a component video/audio device to these jacks. 5 6 OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable. uro Scart Socket (AV/AV) Connect scart socket input or output from an external device to these jacks. HDMI Input Connect an HDMI signal to HDMI IN. Or DVI (VIDO) signal to HDMI/DVI port with DVI to HDMI cable. RGB Input Connect the output from a PC. 9 0 Antenna Input Connect RF antenna to this jack. PCMCIA (Personal Computer Memory Card International Association) Card Slot Insert the CI Module to PCMCIA CARD SLOT. (This feature is not available in all countries.) USB Input Connect USB storage device to this jack. Audio/Video Input Connect audio/video output from an external device to these jacks. S-Video Input Connect S-Video out from an S-VIDO device. 7

10 PRPARATION PRPARATION STAND INSTALLATION (xcept for 60PS0**) Image shown may differ from your TV. When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. BACK COVR FOR WIR ARRANGMNT Image shown may differ from your TV. After Connecting the cables as necessary, install CABL HOLDR as shown and bundle the cables. Assemble the TV as shown. CABL HOLDR Only 60PS0** Install the CABL MANAGMNT CLIP as shown. CABL MANAG- MNT CLIP Fix the bolts securely using the holes in the back of the TV. How to remove the cable management clip Hold the CABL MANAGMNT CLIP with both hands and pull it upward.! NOT FRONT G When assembling the stand, make sure to distinguish and assemble the front and rear side of the stand correctly. DSKTOP PDSTAL INSTALLATION For adequate ventilation allow a clearance of (0cm) all around the TV.! NOT G Do not use the CABL MANAGMNT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged. NOT USING TH DSK-TYP STAND Image shown may differ from your TV. When installing the wall-mounted unit, use the protection cover. Insert the PROTCTION COVR into the TV until clicking sound. inches inches inches inches 8 protection cover

11 CARFUL INSTALLATION ADVIC A You should purchase necessary components to fix the TV safety and secure to the wall from the market. A Position the TV close to the wall to avoid the possibility of it falling when pushed. A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. nsure that children do not climb or hang from the TV. Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen then bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall. A The TV can be installed in various ways such as on a wall, or on a desktop etc. A The TV is designed to be mounted horizontally. WALL MOUNT: HORIZONTAL INSTALLATION A We recommend the use of a LG Brand wall mounting bracket when mounting the TV to a wall. A We recommend that you purchase a wall mounting bracket which supports VSA standard. A LG recommends that wall mounting be performed by a qualified professional installer.! NOT G Should Install wall mount on a solid wall perpendicular to the floor. G Should use a special wall mount, if you want to install it to ceiling or slanted wall. G The surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set; e.g. concrete, natural rock, brick and hollow block. G Installing screw type and length depends on the wall mount used. Further information, refer to the instructions included with the mount. G LG is not liable for any accidents or damage to property or TV due to incorrect installation: - Where a non-compliant VSA wall mount is used. - Incorrect fastening of screws to surface which may cause TV to fall and cause personal injury. - Not following the recommended Installation method. inches PRPARATION inches inches inches Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product. inches! NOT G When moving the TV undo the cords first. G Use a platform or cabinet strong and large enough to support the size and weight of the TV. G To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same. ARTHING nsure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes. Power Supply Circuit breaker Model PQ0** 50PQ0** PQ** 50PQ** PQ0** 50PQ0** PQ0** 50PQ0** PQ60** 50PQ60** 50PS0** 50PS60** 60PS0** B A VSA (A * B) 00 * * * * * * * * * * * * * 00 Standard Screw M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M8 Quantity 9

12 PRPARATION To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTNNA CONNCTION For optimum picture quality, adjust antenna direction. An antenna cable and converter are not supplied. PRPARATION Wall Antenna Socket Multi-family Dwellings/Apartments (Connect to wall antenna socket) Outdoor Antenna (VHF, UHF) RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) Antenna UHF VHF Signal Amplifier In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above. If signal needs to be split for two TVs,use an antenna signal splitter for connection. SWIVL STAND After installing the TV, you can adjust the TV manually to the left or right direction by 0 degrees to suit your viewing position. 0

13 XTRNAL QUIPMNT STUP To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. This section on XTRNAL QUIPMNT STUP mainly uses diagrams for the PQ0** models. Image shown may differ from your TV. HD RCIVR STUP This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below. Connecting with a component cable (xcept for /50PQ0**, /50PQ**) Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONNT IN VIDO jacks on the TV. Connect the audio output of the digital set-top box to the COMPONNT IN AUDIO jacks on the TV. Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) Select Component input source using the INPUT button on the remote control. XTRNAL QUIPMNT STUP Signal 80i/576i 80p/576p 70p/080i 080p Component O O O O (50/60Hz only) HDMI X O O O (Hz/0Hz/50Hz/60Hz)

14 XTRNAL QUIPMNT STUP Connecting a set-top box with an HDMI cable Connect the digital set-top box to HDMI/ DVI IN, HDMI IN, HDMI IN or HDMI IN jack on the TV. HDMI IN XTRNAL QUIPMNT STUP! Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) Select HDMI, HDMI or HDMI input source using the INPUT button on the remote control. NOT G Check that your HDMI cable is version. or higher. If the HDMI cables don t support HDMI version., flickering or no screen display can result. Please use the latest cables that support at least HDMI version.. HDMI/DVI IN Connecting with an HDMI to DVI cable (xcept for /50PQ0**, /50PQ**) Connect the digital set-top box to HDMI/DVI IN jack on the TV. HDMI IN Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the TV. HDMI/DVI IN Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) Select HDMI input source using the INPUT button on the remote control.

15 DVD STUP Connecting with a component cable (xcept for /50PQ0**, /50PQ**) Connect the video outputs (Y, PB, PR) of the DVD to the COMPONNT IN VIDO jacks on the TV. 5 Connect the audio outputs of the DVD to the COMPONNT IN AUDIO jacks on the TV. Turn on the DVD player, insert a DVD. Select Component input source using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. XTRNAL QUIPMNT STUP Component Input ports To achieve better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Y PB PR Y PB PR Video output ports on DVD player Y Y B-Y Cb R-Y Cr Y Pb Pr

16 XTRNAL QUIPMNT STUP Connecting with a uro Scart cable Connect the uro scart socket of the DVD to the AV uro scart socket on the TV. XTRNAL QUIPMNT STUP Turn on the DVD player, insert a DVD. Select AV input source using the INPUT button on the remote control. If connected to AV uro scart socket, select AV input source. Refer to the DVD player's manual for operating instructions. AUDIO/ VIDO (R) AUDIO (L) Scart AV AV Output Type Current input mode Digital TV Analogue TV AV// Component/RGB/HDMI Input Video Audio RGB O O O O O X AV (TV Out) Output Video, Audio ATV only ATV, DTV, AV// output is available. AV (Monitor Out) AV (When DTV scheduled recording is in progress using recording equipment.) X O O O O O (The input mode is converted to DTV automatically.) O O O O X O G TV Out : Outputs analog TV video signals. Monitor Out: Outputs the current screen image. G AV, Component, RGB : xcept for /50PQ0**, /50PQ**! NOT G Any uro scart cable used must be signal shielded.

17 Connecting with a S-Video cable (xcept for /50PQ0**, /50PQ**) Connect the S-VIDO output of the DVD to the S - VIDO input on the TV. VIDO S-VIDO L R ANT IN 5 Connect the audio outputs of the DVD to the AUDIO input jacks on the TV. Turn on the DVD player, insert a DVD. Select AV input source using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. VIDO L/MONO AUDIO R S-VIDO HDMI IN AV IN OUTPUT SWITCH ANT OUT XTRNAL QUIPMNT STUP Connecting the HDMI cable Connect the HDMI output of the DVD to the HDMI/DVI IN, HDMI IN, HDMI IN or HDMI IN jack on the TV. HDMI IN Select HDMI, HDMI or HDMI input source using the INPUT button on the remote control. HDMI/DVI IN Refer to the DVD player's manual for operating instructions.! NOT G The TV can receive video and audio signals simultaneously when using a HDMI cable. G If the DVD does not support Auto HDMI, you must set the output resolution appropriately. G Check that your HDMI cable is version. or higher. If the HDMI cables don t support HDMI version., flickering or no screen display can result. Please use the latest cables that support at least HDMI version.. 5

18 XTRNAL QUIPMNT STUP VCR STUP To avoid picture noise (interference), allow adequate distance between the VCR and TV. Connecting with a RF Cable XTRNAL QUIPMNT STUP ANT OUT ANT IN S-VIDO OUTPUT SWITCH Wall Jack VIDO L R Antenna Connect the ANT OUT socket of the VCR to the ANTNNA IN socket on the TV. Connect the antenna cable to the ANT IN socket of the VCR. Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing. 6

19 Connecting with a uro Scart cable Connect the uro scart socket of the VCR to the AV uro scart socket on the TV. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.) Select AV input source using the INPUT button on the remote control. If connected to AV uro scart socket, select AV input source. AUDIO/ VIDO (R) AUDIO (L) XTRNAL QUIPMNT STUP Scart AV AV Output Type Current input mode Digital TV Analogue TV AV// Component/RGB/HDMI Input Video Audio RGB O O O O O X AV (TV Out) Output Video, Audio ATV only ATV, DTV, AV// output is available. AV (Monitor Out) AV (When DTV scheduled recording is in progress using recording equipment.) X O O O O O (The input mode is converted to DTV automatically.) O O O O X O G TV Out : Outputs analog TV video signals. Monitor Out: Outputs the current screen image. G AV, Component, RGB : xcept for /50PQ0**, /50PQ**! NOT G Any uro Scart cable used must be signal shielded. 7

20 XTRNAL QUIPMNT STUP Connecting with a RCA cable (xcept for /50PQ0**, /50PQ**) Connect the AUDIO/VIDO jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red) Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.) VIDO L/MONO AUDIO R S AV IN XTRNAL QUIPMNT STUP! Select AV input source using the INPUT button on the remote control. NOT G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. S-VIDO VIDO OUTPUT SWITCH L R ANT IN ANT OUT Connecting with a S-Video cable (xcept for /50PQ0**, /50PQ**) Connect the S-VIDO output of the VCR to the S - VIDO input on the TV set. The picture quality is improved; compared to normal composite (RCA cable) input. Connect the audio outputs of the VCR to the AUDIO input jacks on the TV. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.) Select AV input source with using the INPUT button on the remote control. VIDO L/MONO AUDIO R S-VIDO HDMI IN S-VIDO VIDO OUTPUT SWITCH L R ANT IN ANT OUT AV IN! NOT G If both S-VIDO and VIDO sockets have been connected to the S-VHS VCR simultaneously, only the S-VIDO can be received. 8

21 INSRTION OF CI MODUL - To view the encrypted ( pay) services in digital TV mode. - This item is not included for all countries.! NOT Insert the CI Module to PCMCIA (Personal Computer Memory Card International Association) CARD SLOT of TV as shown. For further information, see p.. G Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. DIGITAL AUDIO OUT STUP Sending the TV s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a DVD Home Theater (or amp). XTRNAL QUIPMNT STUP Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. Connect the other end of the optical cable to the digital audio (Optical) input on the audio equipment. IN Set the TV Speaker option - Off in the AUDIO menu.( G p.89). Refer to the external audio equipment instruction manual for operation. VI IN CAUTION GDo not look into the optical output port. Looking at the laser beam may damage your vision. 9

22 XTRNAL QUIPMNT STUP OTHR A/V SOURC STUP (xcept for /50PQ0**, /50PQ**) Connect the AUDIO/VIDO jacks between TV and external equipment. Match the jack colours. (Video = yellow, Audio Left = white, and Audio Right = red) Camcorder Video Game Set XTRNAL QUIPMNT STUP Select AV input source using the INPUT button on the remote control. Operate the corresponding external equipment. Refer to external equipment operating guide. AUDIO L/MONO R VIDO S-VIDO HDMI IN AV IN VIDO L R USB STUP (xcept for /50PQ0**, /50PQ**) Connect the USB device to the USB IN jacks on the side of TV. O HDMI IN After connecting the USB IN jacks, you use the USB function. ( G p.5) 0

23 PC STUP(xcept for /50PQ0**, /50PQ**) This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. Connecting with a D-sub 5 pin cable HDMI IN Connect the RGB output of the PC to the RGB IN (PC) jack on the TV. Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. Turn on the PC and the TV Select RGB input source using the INPUT button on the remote control. HDMI/DVI IN XTRNAL QUIPMNT STUP AUDIO RGB OUTPUT Connecting with a HDMI to DVI cable Connect the DVI output of the PC to the HDMI/DVI IN jack on the TV. HDMI IN Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. HDMI/DVI IN Turn on the PC and the TV. Select HDMI input source using the INPUT button on the remote control. DVI-PC OUTPUT AUDIO

24 XTRNAL QUIPMNT STUP Supported Display Resolution RGB-PC, HDMI/DVI-PC mode HDMI/DVI-DTV mode Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) XTRNAL QUIPMNT STUP 70x00 60x80 800x600 0x768 80x768 60x768 90x080 (RGB-PC) 90x080 (HDMI-PC) x80 70x80 70x576 80x70 90x

25 ! NOT G Avoid keeping a fixed image on the set s screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. G There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. G The synchronization input waveform for Horizontal and Vertical frequencies are separate. G We recommend using 0x768, 60Hz (PQ0**, PQ0**, PQ60**) / 60x768, 60Hz ( 50PQ0**, 50PQ0**, 50PQ60**) / 90x080, 60Hz(50PS0**, 50PS60**, 60PS0**) for the PC mode, they provide the best picture quality. G Connect the signal cable from the monitor output port of the PC to the RGB (PC) port of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV. G Connect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV). G If using a sound card, adjust PC sound as required. G If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC output on the TV. G If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the TV.) G DOS mode may not work depending on the video card if you use an HDMI to DVI cable. G If you use an RGB-PC cable that is too long, there may be interference on the screen. We recommend using under 5m of cable. This provides the best picture quality. XTRNAL QUIPMNT STUP

26 XTRNAL QUIPMNT STUP Screen Setup for PC mode (xcept for /50PQ0**, /50PQ**) Screen Reset Returns Position, Size and Phase to the factory default settings. This function works in the following mode : RGB[PC]. XTRNAL QUIPMNT STUP PICTUR Screen Contrast 00 Brightness 50 Sharpness 70 Colour 70 Tint 0 R Advanced Control Picture Reset G SCRN RTURN Prev. Resolution Auto Config. Position Size Phase Yes To Set No Reset G MNU Select PICTUR. Select Screen. 5 Run Reset. Select Reset. Select Yes. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen.

27 Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This function works in the following mode : RGB[PC]. PICTUR Screen Contrast 00 Brightness 50 Sharpness 70 Colour 70 Tint 0 R Advanced Control Picture Reset G SCRN RTURN Prev. Resolution Auto Config. D Position G F G Size Phase XTRNAL QUIPMNT STUP Reset MNU Select PICTUR. Select Screen. Select Position, Size or Phase. Make appropriate adjustments. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 5

28 XTRNAL QUIPMNT STUP Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] XTRNAL QUIPMNT STUP PICTUR Screen Contrast 00 Brightness 50 Sharpness 70 Colour 70 Tint 0 R Advanced Control Picture Reset G SCRN RTURN Prev. Resolution G 0 x x 768 Auto Config. 60 x 768 Position Size Phase Reset MNU Select PICTUR. Select Screen. Select Resolution. Select the desired resolution. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 6

29 Auto Configure (RGB [PC] mode only) Automatically adjust the picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. Auto configure This function is for automatic adjustment of the screen position, size, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress. PICTUR Screen Contrast 00 Brightness 50 Sharpness 70 Colour 70 Tint 0 R Advanced Control Picture Reset G SCRN RTURN Prev. Resolution Auto Config. G Position Size Phase Reset Yes To Set No XTRNAL QUIPMNT STUP MNU Select PICTUR. Select Screen. Select Auto Config.. If the position of the image is still not correct, try Auto adjustment again. If picture needs to be adjusted again after Auto adjustment in RGB (PC), you can adjust the Position, Size or Phase. 5 Select Yes. Run Auto Config.. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 7

30 WATCHING TV / PROGRAMM CONTROL RMOT CONTROL KY FUNCTIONS (Only /50PQ0**, /50PQ**, /50PQ0**, /50PQ0**) When using the remote control, aim it at the remote control sensor on the TV. POWR AV MOD POWR SAVING TV/RAD Selects Radio, TV and DTV channel. AV MOD POWR NRGY SAVING AV MOD It helps you select and set images and sounds when connecting AV devices.(g p. 50) WATCHING TV / PROGRAMM CONTROL LIST MUT Q.VIW POWR INPUT NRGY SAVING or POWRSAVING 0~9 number button Q.VIW LIST THUMBSTICK (Up/Down/Left/Right) Switches the TV on from standby or off to standby. xternal input mode rotate in regular sequence.(g p. 6) Adjust the power saving mode of the TV.(G p.7) Selects a programme. Selects numbered items in a menu. Returns to the previously viewed programme. Displays the programme table.(g p. 5) Allows you to navigate the on-screen menus and adjust the system settings to your preference. Accepts your selection or displays the current mode. MNU Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu.(g p. ) MNU RTURN / XIT RTURN(XIT) Allows the user to move return one step in an interactive application, PG or other user interaction function. Q.MNU INFO i GUID MARK FAV Coloured buttons These buttons are used for teletext (on TLTXT models only), Programme edit. TLTXT BUTTONS These buttons are used for teletext. For further details, see the Teletext section.(g p. 05) Q.MNU INFO i GUID FAV SUBTITL Recalls your preferred subtitle in digital mode. See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.(g p. 7)(xcept for /50PQ0**, /50PQ**) 8

31 POWR AV MOD POWR SAVING POWR VOLUM UP /DOWN Adjusts the volume. AV MOD NRGY SAVING MUT Switches the sound on or off. LIST MUT Q.VIW Programme UP/DOWN PAG UP/DOWN SIMPLINK / USB Menu control buttons Q. MNU INFO i Selects a programme. from one full set of screen information to the next one. Controls SIMPLINK or USB menu(photo List and Music List or Movie List(Only /50PQ60**, 50PS60**)). Select the desired quick menu source. (Aspect Ratio, Picture Mode, Sound Mode, Audio, Sleep Timer, USB ject.)(g p.) Shows the present screen information. WATCHING TV / PROGRAMM CONTROL GUID Shows programme schedule.(g p. 67) FAV Displays the selected favourite programme. MNU RTURN / XIT MARK Check and un-check programmes in the USB menu. (xcept for /50PQ0**, /50PQ**) Q.MNU INFO i GUID MARK FAV Installing Batteries Q.MNU INFO i GUID FAV Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). Install two.5v AAA batteries. Do not mix old or used batteries with new ones. Close cover. 9

32 WATCHING TV / PROGRAMM CONTROL (xcept for /50PQ0**, /50PQ**, /50PQ0**, /50PQ0**) NRGY SAVING RATIO NRGY SAVING RATIO POWR INPUT TV/RAD Adjust the power saving mode of the TV.(G p.7) Selects your desired picture format.(g p. 7) Switches the TV on from standby or off to standby. xternal input mode rotate in regular sequence.(g p. 6) Selects Radio, TV and DTV channel. WATCHING TV / PROGRAMM CONTROL Q. MNU MNU GUID THUMBSTICK (Up/Down/Left/ Right) RTURN(XIT) INFO i Select the desired quick menu source. (Aspect Ratio, Picture Mode, Sound Mode, Audio, Sleep Timer, USB ject.)(g p.) Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu.(g p. ) Shows programme schedule.(g p. 67) Allows you to navigate the on-screen menus and adjust the system settings to your preference. Accepts your selection or displays the current mode. Allows the user to move return one step in an interactive application, PG or other user interaction function. Shows the present screen information. AV MOD It helps you select and set images and sounds when connecting AV devices.(g p. 50) Coloured buttons These buttons are used for teletext (on TLTXT models only), Programme edit. FRZ TLTXT BUTTONS SUBTITL These buttons are used for teletext. For further details, see the Teletext section.(g p. 05) Recalls your preferred subtitle in digital mode. See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.(g p. 7) FRZ Pause the present picture at the screen. 0

33 NRGY SAVING RATIO VOLUM UP /DOWN MARK Adjusts the volume. Check and un-check programmes in the USB menu. FAV MUT Displays the selected favourite programme. Switches the sound on or off. Programme UP/DOWN PAG UP/DOWN 0~9 number button LIST Q.VIW SIMPLINK / USB Menu control buttons Selects a programme. from one full set of screen information to the next one. Selects a programme. Selects numbered items in a menu. Displays the programme table.(g p. 5) Returns to the previously viewed programme. Controls SIMPLINK or USB menu(photo List and Music List or Movie List(Only /50PQ60**, 50PS60**)). WATCHING TV / PROGRAMM CONTROL Installing Batteries FRZ Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). Install two.5v AAA batteries. Do not mix old or used batteries with new ones. Close cover.

34 WATCHING TV / PROGRAMM CONTROL TURNING ON TH TV - When your TV is turned on, you will be able to use its features. Firstly, connect the power cord correctly and check the main power( r / I ) on the TV. WATCHING TV / PROGRAMM CONTROL Set ID : Off In standby mode to turn TV on, press the INPUT or P D button on the TV or press the POWR button on the remote control and the TV will switch on. Set ID : On In standby mode to turn TV on, press the INPUT or P D button on the TV or press the POWR, INPUT, P or NUMBR button on the remote control and the TV will switch on. Initializing setup If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the Language, Mode Setting, Country, Auto tuning. Note: a. If you close without completing the initial setting, the Initial Setting menu can be displayed again. b. Press the RTURN button to change the current OSD to the previous OSD. c. For those countries without confirmed DTV broadcasting standards, some DTV features might not work, depending on the DTV broadcasting environment. d "Home Use mode is the optimal setting for home environments, and is the TV's default mode. e. "Store Demo" mode is the optimal setting for store environments. If a user modifies image quality data, Store Demo mode initializes the product to the image quality set by us after a certain period of time. f. The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the OPTION menu. PROGRAMM SLCTION Press the P number. or NUMBR buttons to select a programme VOLUM ADJUSTMNT Press the + or - button to adjust the volume. If you wish to switch the sound off, press the MUT button. You can cancel this function by pressing the MUT, + or -, AV Mode button.

35 QUICK MNU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. Aspect Ratio: Selects your desired picture format. For Zoom Setting, select :9, Zoom and Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes back to Q.Menu. Picture Mode : Selects your desired Picture Mode. Sound Mode : It is a feature to automatically set the sound combination which it deems the best for the images being watched. Selects your desired Sound Mode. Q.Menu Aspect Ratio Picture Mode Sound Mode Audio Sleep Timer USB ject Audio : Selects the sound output. Sleep Timer : Sets the sleep timer. USB ject : Selects USB ject in order to eject USB device. (xcept for /50PQ0**, /50PQ**) 6:9 Zoom Setting Standard Standard L+R Off ject (xcept for /50PQ0**, /50PQ**) WATCHING TV / PROGRAMM CONTROL Close Q. MNU Display each menu. or Select your desired Source. Press the Q.MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen.

36 WATCHING TV / PROGRAMM CONTROL ON-SCRN MNUS SLCTION AND ADJUSTMNT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. STUP PICTUR AUDIO Auto Tuning Aspect Ratio : 6:9 Auto Volume : Off Manual Tuning nergy Saving : Intelligent Sensor Clear Voice I I : On Programme dit Picture Mode : Vivid Level - + Software Update : On Contrast 00 Balance 0 L R Diagnostics Brightness 50 Sound Mode : Standard CI Information Sharpness 70 SRS TruSurround XT : On Colour 70 Treble 50 Tint 0 R G Bass 50 WATCHING TV / PROGRAMM CONTROL OPTION Menu Language Audio Language Subtitle Language : nglish : nglish : nglish Hard of Hearing( ) : Off Data Service : MHG Country : UK Input Label SIMPLINK : On (xcept for /50PQ0**, /50PQ**) LOCK Lock System : Off Set Password Block Programme Parental Guidance : Off Input Block STUP OPTION PICTUR LOCK INPUT Antenna AV AV AV Component AUDIO INPUT TIM USB TIM Clock Off Time : Off On Time : Off Sleep Timer : Off USB Photo List Music List Movie List DivX Reg. Code Deactivation RGB HDMI HDMI (Only /50PQ60**, 50PS60**) (xcept for /50PQ0**, /50PQ**) MNU Display each menu. Select a menu item. Press the INFO button, you can check the Simple Manual Menu. to the pop up menu. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen.! NOT G It is not possible to use CI Information in Analogue mode.

37 AUTO PROGRAMM TUNING Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. The maximum number of programmes that can be stored is 500. But the number may differ slightly depending on broadcasting signals. MNU STUP Auto Tuning Manual Tuning Programme dit Software Update : On Diagnostics CI Information Select STUP. Select Auto Tuning. Select Yes. Run Auto Tuning. STUP Auto Tuning Manual Tuning Programme dit Software Update Diagnostics CI Information Use NUMBR buttons to input a -digit password in Lock System O n. If you wish to keep on auto tuning select Yes using the button. Then, press the button. Otherwise select N o. Automatic Numbering: Decide whether to use the programme numbers as sent by broadcasting stations for tuning. : Onf All service-information will be updated. Continue? Yes SCAM L Search Automatic Numbering No WATCHING TV / PROGRAMM CONTROL Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 5

38 WATCHING TV / PROGRAMM CONTROL MANUAL PROGRAMM TUNING (IN DIGITAL MOD) Manual Tuning lets you manually add a programme to your programme list. WATCHING TV / PROGRAMM CONTROL MNU STUP Auto Tuning Manual Tuning Programme dit Software Update : On Diagnostics CI Information Select STUP. Select Manual Tuning. STUP Auto Tuning Manual Tuning Programme dit Software Update Diagnostics CI Information F DTV G Your receiver will add this channel to your channel list. : UHF On CH. 0 Bad Normal Good Update Close Use NUMBR buttons to input a -digit password in Lock System O n. Select DTV. Select the desired channel number. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 6

39 MANUAL PROGRAMM TUNING (IN ANALOGU MOD) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. STUP STUP MNU Auto Tuning Manual Tuning Programme dit Software Update Diagnostics CI Information Select STUP. Select Manual Tuning. Select T V. : On Auto Tuning Manual Tuning Programme dit Software Update Diagnostics CI Information Storage : OnSystem Select V/UHF or Cable. or F TV G Band Channel Search Select the desired channel number. Commence searching. BG V/UHF 0 F G Name C Store Close WATCHING TV / PROGRAMM CONTROL or Select the desired programme number on. 9 Select Store. 0 5 Select a TV system. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. Use NUMBR buttons to input a -digit password in Lock System O n. L : SCAM L/L (France) B G : PAL B/G, SCAM B/G (urope / ast urope / Asia / New Zealand / M.ast / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) D K : PAL D/K, SCAM D/K (ast urope / China / Africa / CIS) To store another channel, repeat steps to 9. 7

40 WATCHING TV / PROGRAMM CONTROL STUP STUP Auto Tuning Manual Tuning Programme dit Software Update Diagnostics CI Information : On Auto Tuning Manual Tuning Programme dit Software Update Diagnostics CI Information F TV G Storage : OnSystem BG Band V/UHF Channel 0 Search F G Name C 0 Store Close WATCHING TV / PROGRAMM CONTROL A Assigning a station name You can assign a station name with five characters to each programme number. MNU Select STUP. Select Manual Tuning. Select T V. Select N a m e. 5 Select the position and make your choice of the second character, and so on. You can use an the alphabet A to Z, the number 0 to 9, +/ -, and blank. 6 7 Select Close. Select Store. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 8

41 PROGRAMM DIT When a programme number is skipped, it means that you will be unable to select it using P button during TV viewing. If you wish to select the skipped programme, directly enter the programme number with the NUMBR buttons or select it in the Programme edit menu. This function enables you to skip the stored programmes. In some countries it is possible to move a programme number by using the YLLOW button only. MNU STUP Auto Tuning Manual Tuning Programme dit Software Update : On Diagnostics CI Information Select STUP. Select Programme dit. YL TV Favourite List DTV Radio TV YL TV YL TV TV Stockholm 5 YL FST 6 CNN 8 YL 9 YL Teema TV Film TV Fakta 50 TV00 TV Fakta 8 Kanal Lokal TV Fakta 86 Info/sat 87 Doku/Kika 88 TV FAV Favourite Pr. Change Navigation P Page Change RTURN Previous Use NUMBR buttons to input a -digit password in Lock System O n. Skip WATCHING TV / PROGRAMM CONTROL nter the Programme dit. Select a programme to be stored or skipped. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 9

42 WATCHING TV / PROGRAMM CONTROL (IN DTV/RADIO MOD) A Skipping a programme number When programmes are to be skipped, the Select a programme number to be skipped. skipped programme shows in blue and these programmes will not be selected by the P buttons during TV viewing. BLU Turn the skipped programme number to blue. If you wish to select a skipped programme, directly enter the programme number with the NUMBR buttons or select it in the programme edit or PG. BLU Release the skipped programme. WATCHING TV / PROGRAMM CONTROL A Selecting favourite programme MARK FAV Select your favourite programme number. This will automatically include the selected programme into your favourite programme list. 0

43 IN TV MOD This function enables you to delete or skip the stored programmes. You can also move some channels and use other programme numbers. A Auto Sort GRN Start Auto Sort. After activating Auto Sort once, you can no longer edit programmes. A Deleting a programme RD RD Select a programme number to be deleted. Turn the deleted programme number to red. Release the deleted programme. A Moving a programme YLLOW Select a programme number to be moved. Turn the moved programme number to YLLOW. The selected programme is deleted, all the following programmes are shifted up one position. WATCHING TV / PROGRAMM CONTROL YLLOW Release the moved programme. A Skipping a programme number Select a programme number to be skipped. BLU Turn the skipped programme number to blue. BLU Release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the P button during normal TV viewing. If you wish to select a skipped programme, directly enter the programme number with the NUMBR buttons or select it in the programme edit or PG. A Selecting a Favourite Programme MARK The selected programme will be added to the Select your favourite programme number. FAV favourite programme list.

44 WATCHING TV / PROGRAMM CONTROL SOFTWAR UPDAT Software Update means software can be downloaded through the digital terrestrial broadcasting system. STUP STUP Auto Tuning Manual Tuning Programme dit Software Update Diagnostics CI Information :: On Auto Tuning Manual Tuning Programme dit Software Update Diagnostics CI Information Off :: On On WATCHING TV / PROGRAMM CONTROL MNU Select STUP. Select Software Update. * When setting Software Update Occasionally, a transmission of updated digital software information will result in the following menu on the TV screen.? Software update is available. Do you want to download? (Ver ) Your TV software is updated when you turn off the TV using the remote control or local key. Save. Select the YS using the button and you will see the following picture. i Turning on the TV will stop the update. Do you want stop? Updating software (Ver ) G (Ver ) 7 % Select On or Off. If you select O n, a user confirm message box will be displayed to notify that new software is found. After the Software Update is complete, the System restarts. i i The update is completed. TV will be rebooted. Close Yes No Yes No Simple Update :for current update stream? The new software is updated at the time below. (Ver ) When the power is turned off, downloading starts. When the power is turned on while updating, the progress status is displayed. 0/Sep :00 Would you like to download now? Yes No Schedule Update : for scheduled update stream When the Software Update menu is "Off", the message to change it to "O n" appears. - During Progress of a Software Update, please note the following: Power to the TV must not be interrupted. The TV must not be switched off. The antenna must not be disconnected. After Software Update, you can confirm the updated software version in Diagnostics menu. It may take an hour to download the software, so make sure that the power stays on during the download.

45 DIAGNOSTICS This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version. This displays the information and signal strength of the tuned *MUX. This displays the signal information and service name of the selected MUX. (*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple channels.)) MNU STUP Auto Tuning Manual Tuning Programme dit Software Update : On Diagnostics CI Information Select STUP. Select Diagnostics. ngineering Diagnostics Manufacturer : LG lectronics Inc. Model/Type : 50PQ000-ZA Serial No. : SKJY07 Software Version : V.6. CH 0 CH CH 6 CH 8 CH 5 CH 60 RTURN Prev. D Popup MNU xit WATCHING TV / PROGRAMM CONTROL Display Manufacturer, Model/Type, Serial Number and Software Version. Display the information of Channel. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen.

46 WATCHING TV / PROGRAMM CONTROL CI [COMMON INTRFAC] INFORMATION This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CI module from the TV. This may cause a malfunction. When the TV is turned on after inserting a CI Module, you may not have any sound output. This may be incompatible with the CI module and smart card. CI (Common Interface) functions may not be possible depending upon the country broadcasting circumstances. WATCHING TV / PROGRAMM CONTROL STUP Auto Tuning Manual Tuning Programme dit Software Update Diagnostics CI Information : On i Viaccess Module Consultations Authorizations Module information Select the item This OSD is only for illustration and the menu options and screen format will vary according to the Digital pay services provider. It is possible for you to change CI (Common Interface) menu screen and service by consulting your dealer. MNU Select STUP. Select CI Information. Select the desired item: Module information, smart card information, language, or software download etc. Save. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen.

47 SLCTING TH PROGRAMM TABL You can check which programmes are stored in the memory by displaying the programme table Displayed when the Locked Programme. A Displaying programme LIST LIST Display the Programme List. A Selecting a programme in the programme list Select a programme. Switch to the chosen programme number. You may find some blue programmes. These have been set up to be skipped by auto programming or in the programme edit mode. Some programmes with the channel number shown in the programme LIST indicate there is no station name assigned. TV/RAD From the programme you are currently watching, the mode will change from TV to DTV to Radio. WATCHING TV / PROGRAMM CONTROL A Paging through a programme list P P A G Turn the pages. LIST Return to normal TV viewing. A Displaying the favourite programme table MARK FAV Display the Favourite Programme table. 5

48 WATCHING TV / PROGRAMM CONTROL INPUT LIST HDMI and AV, (SCART) can be recognized by a detect pin and thus enabled only when an external device approves voltage. By using TV/RAD button, you can move from xternal Input to RF Input and to the last watched programme in DTV/RADIO/TV mode. Antenna AV (Only /50PQ0**, /50PQ**) HDMI AV WATCHING TV / PROGRAMM CONTROL Antenna AV AV AV Component HDMI HDMI HDMI RGB (xcept for /50PQ0**, /50PQ**) INPUT Select the input source. (xcept for /50PQ0**, /50PQ**) You can also adjust INPUT menu. INPUT Antenna AV AV AV Component RGB HDMI HDMI Antenna : Select it when watching the DTV/TV. AV, AV, AV : Select it when watching the VCR or external equipment. Component : Select it when using the DVD or the Digital set-top box depends on connector. RGB :Select it when using PC depends on connector. HDMI, HDMI, HDMI : Select it when using DVD, PC or Digital set-top box depend on connector. 6

49 (xcept for /50PQ0**, /50PQ**) This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CC function. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. If you do not want SIMPLINK menu,select Off. SIMPLINK function is not supported by HDMI IN input. OPTION OPTION Menu Language : nglish Audio Language : nglish Subtitle Language : nglish Hard of Hearing( ) : Off Data Service : MHG Country : UK Input Label SIMPLINK : On Select OPTION. Select SIMPLINK. SIMPLINK Functions Disc playback Control connected AV devices by pressing the,, G, A, l l, FF and GG buttons. Direct Play After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. Select AV device nables you to select one of the AV devices connected to the TV and operate it. Power off all devices When you switch off the TV, all connected devices are turned off. Switch audio-out Offers an easy way to switch audio-out. MNU Menu Language : nglish Audio Language : nglish Subtitle Language : nglish Hard of Hearing( ) : Off Data Service : MHG Country : UK Input Label Off SIMPLINK : On On Select On or Off. Sync Power on When the equipment with Simplink function connected HDMI terminal starts to play, The TV will change automatically to turn on mode. * A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function. Note: To operate SIMPLINK, an HDMI cable over Version. with *CC function should be used. (*CC: Consumer lectronics Control). Save. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. WATCHING TV / PROGRAMM CONTROL 7

50 WATCHING TV / PROGRAMM CONTROL Connecting to Home Theater with the SIMPLINK logo. Connect the HDMI/DVI IN or HDMI IN terminal on the back of the TV and the HDMI output terminal of the Home Theater using HDMI cables. HDMI IN Connect the Digital Audio output terminal on the back of the TV and the Digital Audio input terminal of the Home Theater using optical cables. Select Home Theater in the Speaker menu by pushing the SIMPLINK button. HDMI/DVI IN WATCHING TV / PROGRAMM CONTROL! NOT G Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable. G When you switch the Input source using the INPUT button on the remote control, you can stop the operation of a device controlled by SIMPLINK. SIMPLINK Menu Press the G When you select or operate a media device with home theater function, the speaker automatically switches to home theater speaker (HT speaker). button and then button to select the desired SIMPLINK source. TV viewing : Switch to the previous TV programme regardless of the current mode. DISC playback : Select and play connected discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen. VCR playback : Play and control the connected VCR. Home Theater Selected Device When device is not connected (displayed in gray) HDD Recordings playback : Play and control recordings stored in HDD. 5 When a device is connected (displayed in bright colour) 5 Audio Out to Home theater/audio Out to TV: Select Home theater or TV speaker for Audio Out. Home theater: Only one supported at a time DVD, Recorder: Up to two supported at a time VCR: Only one supported at a time 8

51 DATA SRVIC (This menu is enabled only in Ireland. ) This function allow users to choose between MHG( Digital Teletext) and Teletext if both exist at the same time. If only one of them exists, either MHG or Teletext is enabled regardless of which option you selected. OPTION OPTION Menu Language : nglish Menu Language : nglish Audio Language : nglish Audio Language : nglish Subtitle Language : nglish Subtitle Language : nglish Hard of Hearing( ) : Off Hard of Hearing( ) : Off MHG Data Service : MHG Data Service : MHG Country : Ireland Country Teletext : Ireland Input Label SIMPLINK : On Input Label SIMPLINK : On MNU Select OPTION. INPUT LABL Select Data Service. Selects a label for each input source. Select MHG or Teletext. Save. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. WATCHING TV / PROGRAMM CONTROL OPTION Menu Language Audio Language Subtitle Language : nglish : nglish : nglish Hard of Hearing( ) : Off Data Service : MHG Country : UK Input Label SIMPLINK : On OPTION AV F AV Menu Language : nglish AV Audio Language : nglish Component Subtitle Language : nglish Hard of Hearing( ) : Off RGB Data Service : MHG HDMI Country : UK HDMI Input Label SIMPLINK : On HDMI Close G (xcept for /50PQ0**, /50PQ**) MNU Select OPTION. Select the source. Select Input Label. Select the label. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 9

52 WATCHING TV / PROGRAMM CONTROL AV MOD You can select the optimal images and sounds when connecting AV devices to external input. Off Cinema Sport Game Disables the AV MOD. Optimizes video and audio for watching movies. Optimizes video and audio for watching sports events. Optimizes video and audio for playing games. WATCHING TV / PROGRAMM CONTROL AV MOD Off Cinema Game Sport Press the AV MOD button repeatedly to select the desired source. If you select Cinema in AV mode, Cinema will be selected both for Picture Mode and Sound Mode in PICTUR menu and AUDIO menu respectively. If you select Off in AV mode, the picture and image which you initially set will be selected. 50

53 SIMPL MANUAL You can easily and effetively access the TV information by viewing a simple manual on the TV. During the Simple Manual opreration, audio will be muted. MNU OPTION Country Input Label SIMPLINK Key Lock : UK : On : Off Simple Manual Set ID : ISM Method : Normal Demo Mode : Off Select OPTION. Select Simple Manual. WATCHING TV / PROGRAMM CONTROL Select the part of the manual you want to see. Press the RTURN button to return to normal TV viewing. 5

54 WATCHING TV / PROGRAMM CONTROL Initializing (Reset to original factory settings) This function initializes all settings. But the settings of Day and Night of the Picture Mode cannot be initialized. It is useful to initialize the product or when you move to other city or country. When the Factory Reset is completed, you must restart the Initializing setup. When the Lock System menu is "On", the message to enter the password appears. WATCHING TV / PROGRAMM CONTROL MNU OPTION SIMPLINK Key Lock : On : Off Simple Manual Set ID : ISM Method : Normal Demo Mode : Off Mode Setting :Home Use Factory Reset Select OPTION. Select Factory Reset. OPTION SIMPLINK Key Lock : On : Off Simple Manual Set ID All user settings and channel setting will be : reset. Still Continue? ISM Method : Normal Demo Mode Yes : Off No Mode Setting :Home Use Factory Reset In Lock System "O n", if you forget your password, press '7', '7', '7', '7' on the remote control handset. Select Yes. Start Factory Reset. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 5

55 TO US A USB DVIC G It is not possible to use USB function in /50PQ0**, /50PQ** models. When connecting a USB device When you connect a USB device, this pop up menu is displayed, automatically. If the Pop Up menu does not appear, you can select Music List or Photo List or Movie List(Only /50PQ60**, 50PS60**) in the USB menu. POP UP MNU will not be displayed while the OSD including Menu, PG or Schedule list is activated. In USB device, you can not add a new folder or delete the existing folder. Connect the USB device to the USB IN jacks on the side of TV. This TV Supports on JPG and MP and SD Divx. When removing the USB device HDMI IN USB memory stick Select PHOTO LIST or MUSIC LIST or MOVI LIST(Only /50PQ60**, 50PS60**). PHOTO LIST MUSIC LIST MOVI LIST Select the USB ject menu before removing the USB device. Q. MNU Select ject. TO US A USB DVIC Precautions when using the USB device G Only a USB storage device is recognizable. G If the USB storage device is connected through a USB hub, the device is not recognizable. G A USB storage device using an automatic recognition programme may not be recognized. G A USB storage device which uses its own driver may not be recognized. G The recognition speed of a USB storage device may depend on each device. G Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. G Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files or image files. G Please use only a USB storage device which was formatted as a FAT6, FAT, NTFS file system provided with the Windows operating system. In case of a storage device formatted as a different utility programme which is not supported by Windows, it may not be recognized. Data in a USB storage device cannot be deleted in the NTFS file system. G Please connect power to a USB storage device which requires an external power supply. If not, the device may not be recognized. G Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or an excessively long cable, the device may not be recognized. G Some USB storage devices may not be supported or operated smoothly. G Maximum of 999 files and folders can be recognized. G Data in a USB storage device cannot be aligned. Up to 8 nglish characters can be recognized as a file name. G Please back up the important file because a data of USB device may be damaged. Data management is consumer's responsibility and in consequence the manufactures does not cover the product bearing data damage. G If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is turned on. G The recommended capacity is TB or less for a USB external hard disk and GB or less for USB memory. G Any device with more than the recommended capacity may not work properly. G If a USB external hard disk with a "nergy Saving" function does not work, turn the hard disk off and on again to make it work properly. 5

56 TO US A USB DVIC! NOT Image shown may differ from your TV. G In order to avoid losing the USB memory stick, use the USB connector(sold separately) to fix the USB memory stick to the USB connector holder of the TV. USB connector holder USB Input Port USB Connector (sold separately) - Fix the one end of the USB connector to the USB memory stick and the other end to the USB connector holder. TO US A USB DVIC PHOTO LIST The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. PHOTO(*.JPG) supporting file Baseline: 560 x 860 Progressive format : 0 x 768 You can play JPG files only. Only baseline scan is supported among JPG (SOF0, SOF only). Non-supported files are displayed in the form of bitmap. Screen Components MNU Select USB. Select Photo List. s to upper level folder 5 Current page/total pages Total number of marked photos Usable USB memory Corresponding buttons on the remote control Photo List Drive Page / No Marked Up Folder KY0 KY0 JMJ00 KY0 KY0 KY05 JMJ005 USB Device Free Space 50MB 66x768, 5KB Up Folder JMJ00 JMJ00 JMJ00 JMJ006 JMJ007 JMJ008 Navigation Option P Page Change MARK Mark RTURN xit 5 5

57 Photo Selection and PopUp Menu Photo List Drive Page / No Marked Up Folder KR0 USB Device Free Space 50MB KR0 KR0 KR0 KR05 JMJ00 JMJ005 66x768, 5KB JMJ00 JMJ00 JMJ006 JMJ007 Up Folder JMJ00 JMJ008 Navigation Option P Page Change MARK Mark RTURN xit Photo List USB Device Page / No Marked Free Space 50MB Drive Up Folder KR0 KR0 KR0 66x768, 5KB KR0 KR05 JMJ00 View JMJ005 Mark All 66x768, 5KB JMJ00 Delete JMJ006 JMJ00 Close JMJ007 Up Folder JMJ00 JMJ008 Navigation Option P Page Change Mark xit MARK RTURN G View : Display the selected item. G Mark All : Mark all photos on the screen. G Unmark All : Deselect all marked photos. G Delete : Delete the selected photo item. G Close : Close the pop-up menu. TO US A USB DVIC Select the target folder or drive. Select the desired photos. Show the PopUp menu. Select the desired PopUp menu. Use the P photo page. button to navigation in the Use the MARK button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all photos in the folder in a slide show. Press the RTURN button to return to normal TV viewing. 55

58 TO US A USB DVIC Set up the menu in Full-Sized Screen You can change the settings to display photos stored on a USB device, on a full-sized screen. Detailed operations are available on full-sized photo view screen. Photo List Drive Page / No Marked Up Folder KR0 USB Device Free Space 50MB KR0 KR0 KR0 KR05 JMJ00 JMJ005 66x768, 5KB JMJ00 JMJ00 JMJ006 JMJ007 Up Folder JMJ00 JMJ008 TO US A USB DVIC Navigation Option Page Change Mark xit P MARK RTURN Photo List Drive 66x768, 5KB Up Folder Page / No Marked Up Folder KR0 KR0 KR0 66x768, 5KB KR0 KR05 JMJ00 View JMJ005 Mark All JMJ00 Delete JMJ006 JMJ00 Close JMJ007 JMJ00 JMJ008 USB Device Free Space 50MB Navigation Option Page Change Mark xit P MARK RTURN /7 Slideshow BGM Delete Option Hide The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. Press the RTURN button to move to the previous menu screen. Select the target folder or drive. Select the desired photos. Use the P photo page. button to navigation in the Show the PopUp menu. Select View. 5 The selected photo is displayed in full size. 56

59 6 Select the Slideshow, BGM, Delete, Option or Hide. (Rotate), /7 Slideshow BGM Delete Option Hide Use button to select the previous or next photo. Use button to select and control the menu on the full-sized screen. G Slideshow : When no picture is selected, all photos in the current folder are displayed during slide show. When selected, the selected photos are displayed during slide show. Set the time interval of the slide show in Option. G BGM : Listen to music while viewing photos in full size. Set the BGM device and album in Option. G ( Rotate) : Rotate photos. Rotates the photo 90, 80, 70, 60 clockwise. TO US A USB DVIC G Delete : Delete photos. G OPTION : Set values for Slide Speed and Music Folder. Use button and O K button to set values. Then go to and press O K to save the settings. You cannot change Music Folder while BGM is playing. Press F G to set the time interval between slides. Slide Speed Music Folder Fast Music Cancel G Hide : Hide the menu on the full-sized screen. To see the menu again on the full-sized screen, press button to display. Press the RTURN button to move to the previous menu screen. 57

60 TO US A USB DVIC MUSIC LIST Purchased music files(*.mp) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. MUSIC (*.MP) supporting file Bit rate ~ 0kbps Sampling rate MPG layer : khz,. khz, 8 khz. TO US A USB DVIC Screen Components MNU Select USB. Select Music List. s to upper level folder Current page/total pages Total number of marked music title Usable USB memory Music List Music Page / No Marked Title Up Folder USB Device Free Space 50MB Duration 5 Corresponding buttons on the remote control :0, 0KB Up Folder Navigation Option P Page Change MARK Mark RTURN xit 5 58

61 Music Selection and PopUp Menu As shown, up to 6 music titles are listed per page. Music List Music Page / No Marked Title Up Folder USB Device Free Space 50MB Duration :0, 0KB Up Folder Navigation Option Page Change Mark xit P MARK RTURN Music List Music :0, 0KB Up Folder Page / No Marked Up Folder Title USB Device Free Space 50MB Duration 95KB Kbps Play Play with Photo Mark All Delete Close Navigation Option Page Change Mark xit P MARK RTURN G Play (During stop) : Play the selected music titles. Once a music finishes playing, the next selected one will be played. When there are no selected music titles to play, the next one in the current folder will be played. If you go to a different folder and press the O K button, the current music in playback will stop. G Play Marked : Play the selected music titles. Once a music finishes playing, the next selected one will be played automatically. G Stop Play (During playback) : Stop the playing music titles. G Play with Photo : Start playing the selected music titles and then move to the Photo List. G Mark All : Mark all music titles in the folder. G Unmark All : Deselect all marked music titles. G Delete : Delete the selected music titles. G Close : Close the pop-up menu. TO US A USB DVIC Select the target folder or drive. Select the desired music title Show the PopUp menu. Select the desired PopUp menu. Use the P music page. button to navigation in the Use MARK button to mark or unmark a music. When one or more music files are marked, the marked music title will be played in sequence. For example, if you want to listen to only one music repeatedly, just mark the music only and play it. If no music is marked, all the music in the folder will be played in sequence. Press the RTURN button to return to normal TV viewing. 59

62 TO US A USB DVIC If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. The Screen Saver? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time. TO US A USB DVIC! NOT G When music is playing, is displayed in back of the music title. G A damaged or corrupted music does not play but displays 00:00 in playtime. G A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime. G If you press O K, A buttons, screen saver is stopped. G The PLAY( G ), Pause(I I), A, GG, FF buttons on the remote control are also available in this mode. G You can use the GG button to select the next music and the FF button to select the previous music. 60

63 MOVI LIST (Only /50PQ60**, 50PS60**) The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files. Video editing is not supported but files can be deleted. It is a movie list that displays folder information and Divx file. Supports up to four drives. MOVI(*.avi/*.Divx) supporting file Video format : MPG, MPG, MPG (Doesn t support Microsoft MPG-V, V), DivX.xx, DivX.xx, DivX 5.xx, DivX VOD ( DRM ), XviD, DivX 6.xx(Playback) Audio format : Mpeg, Mp, PCM, Dolby Digital Sampling frequency : within 8~8 khz Bit rate : within 8~0 kbp Subtitle format : *.smi/ *.srt/ *.sub(microdvd, SubViewer.0)/ *.ass/ *.ssa/*.txt(dvd Subtitle System) DivX may not be played depending on its types or recording methods. If the video and audio structure of recorded file is not interleaved, either video or audio is outputted. Max bitrate of playable DivX is Mbps. Maximum FPS (Frame Per Second) can be reached only at SD level. FPS is 5 FPS (70*576) or 0 FPS (70*80) depending on Resolution. Files of 5 FPS or 0 FPS of higher may not be played properly. Files encoded with GMC(Global Motion Compensation) may not be played. TO US A USB DVIC xtension name Video Codec Audio Codec Resolution mpg, mpeg, mpe, vob, dat Avi, divx, mv MPG, MPG MPG-SP, MPG-ASP, DivX.xx, DivX.xx, DivX 5.xx, DivX 6.xx(Playback), Xvid AC, MPG, MP, PCM AC, MPG, MP, PCM 70x576@5p 70x80@0p 6

64 TO US A USB DVIC Screen Components MNU Select USB. Select Movie List s to upper level folder TO US A USB DVIC 5 Current page/total pages Total number of marked movie title Usable USB memory Corresponding buttons on the remote control Movie List movie 70 x 00, MB Up Folder USB Device Page / No Marked Free Space.8GB Title Duration Up Folder The Aviator_(00)_5CH_AV_CD The Aviator_(00)_5CH_AV_CD Scent of a woman.(99).dvdrip 0::5 The Incredibles [RPACK_AC_5.0c-CiM 0:5:0 The Incredibles [RPACK_AC_5.0c-CiM 0:0:0 Navigation Option Page Change MARK Mark RTURN xit 5! NOT G A DivX movie file and its subtitle file must be located in the same folder. G A video file name and its subtitle file name must be identical for it to be displayed. G Use the left/right ( / ) keys to move to a specific frame forward or backward while playing a movie. (The left/right ( / ) keys may not work properly for some files while playing a movie.) 6

65 Movie Selection and PopUp Menu As shown, up to 6 movie titles are listed per page. Movie List movie Page / No Marked Title Up Folder USB Device Free Space.8GB Duration The Aviator_(00)_5CH_AV_CD The Aviator_(00)_5CH_AV_CD Scent of a woman.(99).dvdrip 0::5 70 x 00, MB The Incredibles [RPACK_AC_5.0c-CiM 0:5:0 Up Folder The Incredibles [RPACK_AC_5.0c-CiM 0:0:0 Navigation Option Page Change Mark xit MARK RTURN Movie List movie 70 x 00, MB Up Folder USB Device Page / No Marked Free Space.8GB Title Duration Up Folder The Aviator_(00)_5CH_AV_CD 70x00, MB The Aviator_(00)_5CH_AV_CD Play Scent of a woman.(99).dvdrip 0::5 Mark All The Incredibles [RPACK_AC_5.0c-CiM Delete0:5:0 The Incredibles [RPACK_AC_5.0c-CiM Close 0:0:0 G Play : Play the selected movie titles. Divx Play is executed while screen changes. G Mark All : Mark all movie titles in the folder. G Unmark All : Deselect all marked movie titles. G Close : Close the pop-up menu. TO US A USB DVIC Navigation Option Page Change MARK Mark RTURN xit Select the target folder or drive. Select the desired movie titles. In the case of files not supported, amessage regarding non-supported file is displayed. Show the PopUp menu. Select the desired PopUp menu. Press the RTURN button to return to normal TV viewing. 6

66 TO US A USB DVIC DivX Audio Language & Subtitle Language Picture Size Subtitle Language Audio Language Subtitle File. Language. Sync. Position F Full Screen G 0 / 0 Latin 0 0 TO US A USB DVIC Select the desired option. Select Picture Size, Subtitle Language, Audio Language, Subtitle File, Language, Sync or Position. When DivX is playing, if you press the RD button, this message is displayed. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. Using the remote control FF / GG I I When playing, repeatedly, press the RW( FF ) button to speed up FF -> FFF -> FFFF -> FFFFF ->FFFFFF. repeatedly, press the F F( GG ) button to speed up GG-> GGG -> GGGG -> GGGGG -> GGGGGG. Pressing these buttons repeatedly increases the fast forward/reverse speed. During playback, press the Pause(I I) button. Still screen is displayed. When using the or button during playback a cursor indicating the position can be viewed on the screen. PLAY( G ) Press the PLAY( G ) button to return to normal playback. 6

67 DIVX RGISTRATION COD (Only /50PQ60**, 50PS60**) Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.) USB USB MNU Photo List Music List Movie List DivX Reg. Code Deactivation Photo List Music List Movie List DivX Reg. Code Deactivation i Div X(R) Video On Demand Your registration code is : *** ******* To learn more visit Select USB. Select Divx Reg Code. Close TO US A USB DVIC Display Divx Reg. Code. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. DivX Certified to play DivX video, including premium content ABOUT DIVX VIDO: DivX is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDO-ON-DMAND: This DivX Certified device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.! NOT Supported movie file Resolution : under 70x576 WxH pixels. Frame rate : under 0 frames/sec G Video Codec : MPG, MPG, MPG (Doesn t support Microsoft MPG-V, V), DivX.xx, DivX.xx, DivX 5.xx, DivX VOD ( DRM ), XviD, DivX 6.xx(Playback). G When loading, some buttons may not work. 65

68 TO US A USB DVIC DACTIVATION (Only /50PQ60**, 50PS60**) Delete the existing authentication information to receive a new DivX user authentication for TV. Once this function is executed, a DivX user authentication is required again to see DivX DRM files. USB USB Photo List Music List Movie List DivX Reg. Code Deactivation Photo List Music List Movie List DivX Reg. Code Deactivation i Div X(R) Video On Demand Do you want to deactivation your device? Yes No TO US A USB DVIC MNU Select USB. Select Deactivation. Select Yes or N o. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 66

69 PG (LCTRONIC PROGRAMM GUID)(IN DIGITAL MOD) This system has an lectronic Programme Guide (PG) to help your navigation through all the possible viewing options. The PG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the PG (the availability and amount of these programme details will vary, depending on the particular broadcaster). This function can be used only when the PG information is broadcast by broadcasting companies The PG displays the programme details for next 8 days. Shows the present screen information. Displayed with a Teletext Programme. Switch on/off PG GUID Switch on or off PG. Select a programme or P Displayed with a DTV Programme. Displayed with a Radio Programme. Displayed with a MHG Programme. Displayed with a AAC Programme. Aspect ratio of broadcasting programme. Aspect ratio of broadcasting programme. Select desired programme. Display the selected programme. Displayed with a Subtitle Programme. Displayed with a Scramble Programme. Displayed with a Dolby Programme. Displayed with a Dolby Digital PLUS Programme. 80i/p, 576i/p, 70p, 080i/p : Resolution of broadcasting programme Programme Guide YL TV 6/ Mar 006 5:09 ALL 6/Mar(Mon) :00 5:00 YL TV No Information Kungskonsumente YL TV No Information TV: Farmen No Information TV.. No Information 5 YL FST 6 CNN No Information No Information 8 YL Tänään otsikoissa TV/RAD Radio FAV Favourite INFO i Information Pr. Change Mode Date Schedule Schedule List PG (LCTRONIC PROGRAMM GUID)(IN DIGITAL MOD) 67

70 PG (LCTRONIC PROGRAMM GUID) Button Function in NOW/NXT Guide Mode You can view a program being broadcasted and one scheduled to follow. RD Change PG mode. Programme Guide YL TV 6/ Mar 006 5:09 YLLOW BLU nter Timer Record/Remind setting mode. nter Timer Record/Remind list mode. ALL NOW NXT YL TV That 70s show Keno YL TV Your World Today World Business TV.. Legenen om Den... Fantomen 5 YL FST Naturtimmen Kritiskt 6 CNN Lyssna ABC 8 YL Glamour Tänään otsikoissa Change to the selected programme. TV/RAD Radio FAV Favourite INFO i Information Pr. Change Mode Schedule Schedule List Select NOW or NXT Programme. PG (LCTRONIC PROGRAMM GUID)(IN DIGITAL MOD) P Select the Broadcast Programme. Page Up/Down. Button Function in 8 Day Guide Mode RD BLU Change PG mode. GRN nter Date setting mode. YLLOW nter Timer Record/Remind setting mode. nter Timer Record/Remind list mode. Change to the selected programme. Select NOW or NXT Programme. GUID TV/RAD GUID or Switch off PG. Select TV or RADIO Programme. Detail information on or off. Programme Guide YL TV 6/ Mar 006 5:09 ALL or 6/Mar(Mon) :00 5:00 YL TV No Information Kungskonsumente YL TV No Information TV: Farmen No Information TV.. No Information 5 YL FST 6 CNN No Information No Information 8 YL Tänään otsikoissa TV/RAD Radio FAV Favourite INFO i Information Switch off PG. Pr. Change Mode Date Schedule Schedule List Select the Broadcast Programme. TV/RAD Select TV or RADIO Programme. P Page Up/Down. Detail information on or off 68

71 Button Function in Date Change Mode GRNSwitch off Date setting mode. Change to the selected date. Select a date. Switch off Date setting mode. Programme Guide YL TV 6/ Mar 006 5:09 ALL 6/Mar(Mon) :00 5:00 YL TV No Information Kungskonsumente YL TV No Information TV: Farmen No Information TV.. No Information 5 YL FST 6 CNN No Information No Information 8 YL Tänään otsikoissa Date. Change Date xit GUID or Switch off PG. Button Function in xtended Description Box YLLOW GUID Text Up/Down. nter Timer Record/Remind setting mode. The detail information on or off. or Switch off PG. Information 6/ Mar 006 6/ Mar 006 5:09 INFO i Info. xit Schedule PG (LCTRONIC PROGRAMM GUID)(IN DIGITAL MOD) 69

72 PG (LCTRONIC PROGRAMM GUID) Button Function in Record/Remind Setting Mode Sets a start or end time for recording, and sets a reminder only for a start time, with the end time grayed out. - This function is available only when recording equipment that use pin8 recording signalling has been connected to the DTV-OUT(AV) terminal, using a SCART cable. YLLOW Change to Guide or Timer list mode. Schedule 6/ Mar 006 5:09 Save Timer Record/Remind. Type Record Programme Date Start Time 6CNN 0 Mar. 7 : 00 nd Time 7 : 0 Select Type, Programme, Date or Start/nd time. Save Cancel Function setting. PG (LCTRONIC PROGRAMM GUID)(IN DIGITAL MOD) Button Function in Schedule List Mode If you ve created a schedule list, a scheduled program is displayed at the scheduled time even when you are watching a different program at the time. YLLOW Add new Manual Timer setting mode. GRNnter Schedule List editing mode. RD BLU Delete the selected item. Change to Guide mode. Select Schedule List. Schedule List Record 6/ Mar 006 :09 Title Time Date Programme 6/ Mar 6/ Mar 6/ Mar 6/ Mar 6/ Mar 6/ Mar Delete dit New Guide 70

73 PICTUR CONTROL PICTUR SIZ (ASPCT RATIO) CONTROL You can watch the screen in various picture formats; 6:9, Just Scan, Original, :, :9, Zoom, Cinema Zoom and Full Wide. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using button. This function works in the following signal. Q. MNU Select Aspect Ratio. Select the desired picture format. You can also adjust Aspect Ratio in the PIC- TUR menu. For Zoom Setting, select :9, Zoom and Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes back to Q.Menu. 6:9 The following selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire screen(useful for viewing : formatted DVDs) Original When your TV receives a wide screen signal it will automatically change to the picture format broadcast. PICTUR CONTROL Original Just Scan Following Selection will lead to you view the picture of best quality without loss of original picture in high resolution image. Note : If there is noise in original Picture, You can see the noise at the edge. : The following selection will allow you to view a picture with an original : aspect ration, gray bars will appear on both the left and right of the screen. Just Scan 7

74 PICTUR CONTROL :9 You can view a picture format of :9 or a general TV programme in the :9 mode. The :9 screen is viewed in the same way as in :, but is magnified to the left and right. Cinema Zoom Choose Cinema Zoom when you wish the picture to be altered, both horizontally extended and vertically cropped. The picture adopting a compromise between alteration and screen coverage. The adjustment range is -6. PICTUR CONTROL Zoom The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped. Full Wide When TV receives the wide screen signal,it will lead you to adjust the picture horizontally or vertically, in a linear proportion,to fill the entire screen fully. Full Wide! NOT G You can only select :, 6:9 (Wide), :9, Zoom, Cinema Zoom in Component (under 70p), HDMI mode. G You can only select :, 6:9 (Wide) in RGB/HDMI[PC] mode only. G In DTV/HDMI/Component (over 70p) mode, Just Scan is available. 7

75 NRGY SAVING / POWR SAVING It reduces the plasma display s power consumption. The default factory setting complies with the nergy Star requirements and is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the nergy Saving level or by setting the Picture Mode. Only /50PQ0**, /50PQ0**, /50PQ60**, 50PS0**, 50PS60**, 60PS0** Only /50PQ0**, /50PQ** PICTUR PICTUR MNU Aspect Ratio : 6:9 nergy Saving :: Intelligent Sensor Picture Mode : Vivid Intelligent Sensor Contrast 00 Off Brightness 50 Minimum Sharpness 70 Medium Colour 70 Maximum Tint 0 F Low G Select PICTUR. Select nergy Saving or Power Saving. Select Intelligent Sensor(xcept for /50PQ0** /50PQ**), Off, Minimum, Medium or Maximum. Aspect Ratio : 6:9 Power nergy Saving Saving :: Intelligent Off Sensor Picture Mode : Vivid Contrast Off 00 Brightness Minimum 50 Sharpness Medium 70 Colour Maximum 70 Tint 0 R (xcept for /50PQ0** /50PQ**) When the Intelligent sensor function is on, the most suitable picture is automatically adjusted according to the surrounding conditions. Intelligent Sensor : Adjusts picture according to the surrounding conditions. G PICTUR CONTROL When the Intelligent Sensor is selected,(xcept for /50PQ0** /50PQ**) Select Low, Middle or High. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 7

76 PICTUR CONTROL PRST PICTUR STTINGS Picture Mode-Preset Vivid Standard Cinema Sport G a m e nhances contrast, colour and resolution. Displays the standard-quality screen. Optimizes video for watching movies. Optimizes video for watching sports events. Optimizes video for playing games. PICTUR PICTUR PICTUR CONTROL MNU Aspect Ratio : 6:9 nergy Saving : Intelligent Sensor Picture Mode : Vivid : Vivid Contrast 00 Brightness 50 Sharpness 70 Colour 70 Tint 0 Select PICTUR. Select Picture Mode. Select Vivid, Standard, Cinema, Sport or Game. R G Aspect Ratio : 6:9 nergy Saving : Intelligent Sensor Picture Mode : Vivid : Vivid Contrast 00 Brightness 50 Sharpness 70 Colour 70 Tint 0 Vivid Standard Cinema Sport Game xpert xpert Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture Mode menu based on the programme category. You can also adjust Picture Mode in the Q. Menu. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 7

77 MANUAL PICTUR ADJUSTMNT Picture Mode-User option Contrast Adjusts the difference between light and dark levels in the picture. Brightness Increases or decreases the amount of white in the picture. Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Colour Adjusts intensity of all colours. Tint Adjusts the balance between red and green levels. PICTUR PICTUR MNU Aspect Ratio : 6:9 nergy Saving : Intelligent Sensor Picture Mode : Vivid : Vivid Contrast 00 Brightness 50 Sharpness 70 Colour 70 Tint 0 R Select PICTUR. Select Picture Mode. G Aspect Ratio : 6:9 nergy Saving : Intelligent Sensor Picture Mode : Vivid : Vivid Contrast 00 Brightness 50 Sharpness 70 Colour 70 Tint 0 Vivid Standard Cinema Sport Game xpert xpert PICTUR CONTROL Select Vivid, Standard, Cinema, Sport or Game. Select Contrast, Brightness, Sharpness, Colour or Tint. 5 Make appropriate adjustments. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen.! NOT G You cannot adjust colour, sharpness and tint in the RGB/HDMI[PC] mode. G When the xpert / is selected, you can select Contrast, Brightness, H Sharpness, V Sharpness, Colour or Tint. 75

78 PICTUR CONTROL PICTUR IMPROVMNT TCHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustment to each video mode, execute the Picture Reset function for each Picture Mode. PICTUR PICTUR PICTUR CONTROL Screen Contrast 00 Brightness 50 Sharpness 70 Colour 70 Tint 0 R Advanced Control Picture Reset G Screen Contrast Colour 00Temperature F Medium G BrightnessDynamic 50 Contrast Sharpness Dynamic 70 Colour Colour 70 Noise Reduction Tint 0 Gamma Advanced Control Black Level Picture Reset Film Mode Colour Gamut dge nhancer Close High High Medium Medium High Off Standard Off MNU Select PICTUR. Select Advanced Control. Select your desired Source. : Colour Temperature, Dynamic Contrast, Dynamic Colour, Noise Reduction, Gamma, Black Level, Film Mode, Colour Gamut or dge nhancer. Make appropriate adjustments. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 76

79 Colour Temperature ( Cool/ Medium/ Warm) Dynamic Contrast (Off/Low/High) Dynamic Colour (Off/Low/High) Noise Reduction ( Off/ Low/ Medium/ High) Gamma ( Low/ Medium/ High) Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. Adjusts the contrast to keep it at the best level according to the brightness of the screen. The resolution of gradation is improved by making bright parts brighter and dark parts darker. This feature refers to dynamic contrast, and enhances the feeling of presence that contrast controls are intended to give by using dimming and other input signals. Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid. Reduces screen noise without compromising video quality. This feature is also used to reduce recursive noise and MPG noise (Mosquito/Block). You can adjust brightness of dark area and middle gray level area of the picture. Low : Make dark and middle gray level area of the picture brighten. Medium: xpress original picture gradation. High: Make dark and middle gray level area of the picture darken. Black Level (Low/High) Low :The picture of the screen gets darker. High: The picture of the screen gets brighter. Auto : Realizing the black level of the screen and set it to High or Low automatically. Makes dark parts on the screen look darker. Set black level of the screen to proper level. This function works in the following mode: AV (NTSC-M), HDMI or Component. This function enables to select Low or High in the following mode : AV(NTSC-M), HDMI or Component. Otherwise, Black level is set to Auto. PICTUR CONTROL Film Mode (On/Off) Colour Gamut ( Wide/ Standard) Makes video clips recorded in film look more natural. This feature operates only in TV, AV and Component 80i/576i/080i mode. Change the colour gamut of the output image. Wide: xpress rich colour tones using the maximum colour gamut available in the TV regardless of the input image. Standard: xpress accurate colour tones by changing the colour gamut to meet international standards based on the input image data (resolution/format). dge nhancer (Off/On) Show clearer and distinctive yet natural corners of the video. mphasizes the frames of the video without over peaking. 77

80 PICTUR CONTROL xpert Picture Control By segmenting categories, xpert and xpert provide more categories which users can set as they see fit, offering the optimal picture quality for users. As the detail item for video quality experts to fine tune the video using specific videos, this may not be effective for general videos. PICTUR PICTUR PICTUR CONTROL MNU Aspect Ratio : 6:9 Vivid nergy Saving : Intelligent Sensor Picture Mode : xpert : Vivid Contrast Standard Cinema 00 Brightness Sport 50 Sharpness Game 70 Colour xpert 70 Tint xpert 0 R Select PICTUR. Select Picture Mode. G Screen Dynamic Contrast Brightness 50 Noise Reduction H sharpness 50 F Off Off G V sharpness Gamma 70 Medium Colour Black 70 Level High Tint Film Mode 0 Off Advanced xpert Control Colour Control Standard Picture Reset Colour Gamut SD Standard dge nhancer Off D Close 5 6 Select xpert or xpert. Select xpert Control. Select your desired Source. Make appropriate adjustments. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 78

81 Dynamic Contrast (Off/Low/High) Noise Reduction ( Off/ Low/ Medium/ High) Gamma ( Low/ Medium/ High) Adjusts the contrast to keep it at the best level according to the brightness of the screen. The resolution of gradation is improved by making bright parts brighter and dark parts darker. This feature refers to dynamic contrast, and enhances the feeling of presence that contrast controls are intended to give by using dimming and other input signals. Reduces screen noise without compromising video quality. This feature is also used to reduce recursive noise and MPG noise (Mosquito/Block). You can adjust brightness of dark area and middle gray level area of the picture. Low : Make dark and middle gray level area of the picture brighten. Medium: xpress original picture gradation. High: Make dark and middle gray level area of the picture darken. Black Level (Low/High) Film Mode (On/Off) Colour Standard (SD/HD) Low :The picture of the screen gets darker. High: The picture of the screen gets brighter. Auto : Realizing the black level of the screen and set it to High or Low automatically. Makes dark parts on the screen look darker. Set black level of the screen to proper level. This function works in the following mode: AV (NTSC-M), HDMI or Component. This function enables to select Low or High in the following mode : AV(NTSC-M), HDMI or Component. Otherwise, Black level is set to Auto. Makes video clips recorded in film look more natural. This feature operates only in TV, AV and Component 80i/576i/080i mode. Select the international standard for the colour gamut that will be applied when the colour gamut is set to Standard. SD: Increase colour accuracy by adjusting the output image to meet the BU (uropean Broadcasting Union) Colour Coordinate Standard. HD: Increase colour accuracy by adjusting the output image to meet ITU.BT-709 (High Definition Signal International Colour Coordinate Standard). PICTUR CONTROL Colour Gamut ( Wide/ Standard) dge nhancer (Off/On) Change the colour gamut of the output image. Wide: xpress rich colour tones using the maximum colour gamut available in the TV regardless of the input image. Standard: xpress accurate colour tones by changing the colour gamut to meet international standards based on the input image data (resolution/format). Show clearer and distinctive yet natural corners of the video. mphasizes the frames of the video without over peaking. 79

82 PICTUR CONTROL White Balance (Medium/Warm/Cool) Adjust white balance. White Balance (Medium/Warm/Cool) Pattern (Inner/Outer) Decide whether to use the Internal Pattern or xternal Pattern when adjusting white balance. Red Gain/Green Gain/Blue Gain Adjust high-level white balance. Red Offset/Green Offset/Blue Offset Adjust low-level white balance. Colour Management System Colour (Red/Green/Blue/Yellow/Cyan/Magenta) Adjust colour saturation by area. Tint (Red/Green/Blue/Yellow/Cyan/Magenta) Adjust colour tint by area. PICTUR CONTROL 80

83 PICTUR RST Settings of the selected picture modes return to the default factory settings. PICTUR PICTUR Contrast 00 Contrast 00 Brightness 50 Brightness 50 Sharpness 70 Sharpness 70 Colour 70 Tint 0 R G i Resetting Colour video configuration Tint R 0 G MNU Advanced Control Picture Reset Screen Select PICTUR. Screen Advanced Control Picture Reset PICTUR CONTROL Select Picture Reset. Initialize the adjusted value. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 8

84 PICTUR CONTROL IMAG STICKING MINIMIZATION (ISM) MTHOD A frozen or still picture displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods. Orbiter Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every minutes. Colour Wash The colour block with the screen moved a little and the white pattern are alternately displayed. It is difficult to sense the afterimage occurred while the temporary afterimage is removed and the colour pattern is operating. White Wash White wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to clear entirely with White Wash. OPTION OPTION PICTUR CONTROL Country Input Label SIMPLINK Key Lock : UK : On : Off Siimple Manual Set ID : ISM Method : Normal Demo Mode : Off Country Input Label SIMPLINK Key Lock : UK : On : Off Siimple Manual Set ID : ISM Method : Normal Demo Mode : Off Normal Orbiter Colour Wash White Wash MNU Select OPTION. Select ISM Method. If you do not need this function, set Normal. Select Normal, Orbiter, Colour Wash or White Wash. Save. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 8

85 DMO MOD Use it to see the difference between XD Demo on and XD Demo off. OPTION OPTION Country : UK Country : UK Input Label Input Label SIMPLINK : On SIMPLINK : On Key Lock : Off Key Lock : Off Simple Manual Simple Manual Set ID : Set ID : MNU ISM Method : Normal Demo Mode : Off Select OPTION. Select Demo Mode. ISM Method Demo Mode : Normal : Off Off On PICTUR CONTROL Select O n or Off. To stop the Demo Mode, press any button. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 8

86 PICTUR CONTROL MOD STTING We recommend setting the TV to Home Use mode for the best picture in your home environment. Store Demo mode is an optimal setting for displaying at stores. OPTION Mode Setting Input Label SIMPLINK : On Selecting the environment. Choose the setting mode you want. Key Lock Simple Manual : Off Store Demo Home Use Set ID : ISM Method : Normal Demo Mode : Off Mode Setting ::Home Use Select [Home Use] to use this TV at home. To use this TV at store, select [Store Demo]. PICTUR CONTROL MNU Select OPTION. Select Mode Setting. Select Store Demo or Home Use. Save. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 8

87 SOUND & LANGUAG CONTROL AUTO VOLUM LVLR AVL automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each programme. AUDIO AUDIO Auto Volume : Off Auto Volume : Off Off Clear Voice I I : On Clear Voice I I : On On Level - + Level - + Balance 0 L R Balance 0 L R Sound Mode : Standard Sound Mode : Standard SRS TruSurround XT : On SRS TruSurround XT : On Treble 50 Treble 50 Bass 50 Bass 50 MNU Select AUDIO. Select Auto Volume. Select O n or Off. SOUND & LANGUAG CONTROL Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 85

88 SOUND & LANGUAG CONTROL PRST SOUND STTINGS-SOUND MOD You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust Treble, Bass. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory. Standard Music Cinema Sport Game Offers standard-quality sound. Optimizes sound for listening to music. Optimizes sound for watching movies. Optimizes sound for watching sports events. Optimizes sound for playing games. AUDIO AUDIO Auto Volume : Off Auto Volume : Off Clear Voice I I : On Clear Voice I I : On Level - + Level - + Balance 0 L R Balance 0 Sound Mode : Standard Sound Mode :: Standard Standard SRS TruSurround XT : On Music SRS TruSurround XT : On- + Treble Cinema 50 Treble Bass Sport 50 Bass Game SOUND & LANGUAG CONTROL MNU Select AUDIO. Select Sound Mode. Select Standard, Music, Cinema, Sport or Game. You can also adjust Sound Mode in the Q. Menu. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 86

89 SOUND STTING ADJUSTMNT -USR MOD AUDIO Auto Volume Clear Voice I I : Off : On Level - + Balance 0 L R Sound Mode : Standard (User) SRS TruSurround XT : On Treble 50 Bass 50 AUDIO Auto Volume : Off Clear Voice I I : On Level - + Balance 0 Sound Mode :: Standard (User) Standard (User) Music SRS TruSurround XT : On- + Treble Cinema Bass Sport Game MNU Select AUDIO. Select Sound Mode. Select Standard, Music, Cinema, Sport or Game. 5 Select Treble, Bass. Set the desired sound level. SRS TRUSURROUND XT MNU Select this option to sound realistic. Select AUDIO. Select SRS TruSurround XT. Select O n or Off. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. SRS TruSurround XT : TruSurround XT is a patented SRS technology that solves the problem of playing 5. multicannel content over two speakers. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. SOUND & LANGUAG CONTROL G is a trademark of SRS Labs, Inc. G TruSurround XT technology is incorporated under license from SRS Labs, Inc. 87

90 SOUND & LANGUAG CONTROL CLAR VOIC II By differentiating the human sound range from others, it helps users listen to human voices better. AUDIO Auto Volume : Off Clear Voice I I : On Level - + Balance 0 L R Sound Mode : Standard SRS TruSurround XT : On Treble 50 Bass 50 AUDIO Auto Volume : Off Off Clear Voice I I : On On Level - + Balance 0 L R Sound Mode : Standard SRS TruSurround XT : On Treble 50 Bass 50 MNU Select AUDIO. Select Clear Voice II. Select levels from -6 to +6. Select O n or Off. When the Clear Voice II is selected O n, SOUND & LANGUAG CONTROL BALANC Press the MNU button to return to normal TV viewing. Select the desired Level. Press the RTURN button to move to the previous menu screen. You can adjust the sound balance of the speakers to preferred levels. AUDIO AUDIO Auto Volume : Off Auto Volume : Off Clear Voice I I : On Clear Voice I I : On Level - + Level - + Balance 0 L R Balance Balance 0 0 F L R G Sound Mode : Standard Sound Mode : Standard SRS TruSurround XT : On SRS TruSurround XT : On Close Treble 50 Treble 50 Bass 50 Bass 50 MNU Select AUDIO. Select Balance. Press the MNU button to return to normal TV viewing. Make desired adjustment. Press the RTURN button to move to the previous menu screen. 88

91 TV SPAKRS ON/ OFF STUP You can adjust the TV internal speaker status. In AV, AV, AV(xcept for /50PQ0**, /50PQ**), COMPONNT(xcept for /50PQ0**, /50PQ**), R G B(xcept for /50PQ0**, /50PQ**) and HDMI with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system, turn off the TV internal speakers. AUDIO AUDIO Balance 0 L R Balance 0 L R Sound Mode : Standard SRS TruSurround XT : On Sound Mode : Standard SRS TruSurround XT : On Treble 50 Treble 50 Bass 50 Bass 50 Reset Reset Digital Audio Out : Auto Digital Audio Out : Auto Off TV Speaker : On TV Speaker : On On MNU Select AUDIO. Select TV Speaker. Select O n or Off. SOUND & LANGUAG CONTROL! NOT G When the TV speaker is turned off while the Simplink home theater is operating, the sound output automatically switches to the Home theater speaker, but when the TV speaker is turned on, the sound output the TV speaker. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 89

92 SOUND & LANGUAG CONTROL SLCTING DIGITAL AUDIO OUT This function allows you to select your preferred Digital Audio Output. The TV can only output DOLBY Digital if a channel is broadcast with Dolby Digital audio. When Dolby digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace) output to Dolby Digital. If Auto is selected in the digital audio out menu when dolby digital is not available, SPDIF output will be PCM(Pulse-code modulation). ven if both Auto and Audio language have been set in a channel which broadcast Dolby Digital Audio, only Dolby Digital will be played. If the sample rate converter on this chip does not support. to 8kHz, this content should always produce stereo PCM at digital output. AUDIO AUDIO Balance 0 Sound Mode : Standard SRS TruSurround XT : On Treble 50 Bass 50 Reset Digital Audio Out : Auto TV Speaker : On L R Balance 0 Sound Mode : Standard SRS TruSurround XT : On Treble 50 Bass 50 Reset Dolby Auto Digital Digital Audio Out : Auto PCM TV Speaker : On L R SOUND & LANGUAG CONTROL MNU Select AUDIO. Select Digital Audio Out. Select Auto or PCM. Manufactured under license from Dolby Laboratories. Dolby and the double-d symbol are trademarks of Dolby Laboratories. There is a possibility that when HDMI mode, some DVD players do not make SPDIF sound. At that time, set the output of the digital audio of the DVD player to PCM.(In HDMI, DOLBY DIGITAL PLUS is not supported) Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 90

93 AUDIO RST Settings of the selected Sound Mode return to the default factory settings. AUDIO Clear Voice I I : On Level - + Balance 0 L R Sound Mode : Standard SRS TruSurround XT : On Treble Bass 50 Reset - + AUDIO Clear Voice I I : On Level - + Balance 0 L R Sound Mode : Standard i SRS Resetting TruSurround XT sound : On mode configuration... Treble Bass 50 Reset - + MNU Select AUDIO. Select Reset. Initialize the adjusted value. SOUND & LANGUAG CONTROL Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 9

94 SOUND & LANGUAG CONTROL AUDIO DSCRIPTION(IN DIGITAL MOD ONLY) This function is for the blind, and provides explanatory audio describing the current situation in a TV programme in addition to the basic audio. When Audio Description On is selected, basic audio and Audio Description are provided only for those programmes that have Audio Description included. When Main Audio is AAC or Dolby Digital Plus Audio, Audio Description is not supported. AUDIO AUDIO SRS TruSurround XT : On Treble 50 Bass 50 Reset Digital Audio Out : Auto TV Speaker : On Audio Description : On Volume 0 SRS TruSurround XT : On Treble 50 Bass 50 Reset Digital Audio Out : Auto TV Speaker : On Audio Description : On Off Volume 0 On SOUND & LANGUAG CONTROL MNU Select AUDIO. Select Audio Description. Select O n or Off. When the Audio Description is selected O n, Select the desired Volume. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 9

95 I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears with the programme number and station name. Q. MNU Select Audio. Select the sound output. A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved. A Language selection for dual language broadcast If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II. DUAL I DUAL II DUAL I+II Broadcast Mono Stereo Dual On Screen Display MONO STRO DUAL I, DUAL II, DUAL I+II Sends the primary broadcast language to the loudspeakers. Sends the secondary broadcast language to the loudspeakers. Sends a separate language to each loudspeaker. SOUND & LANGUAG CONTROL 9

96 SOUND & LANGUAG CONTROL NICAM Reception (In Analogue Mode Only) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. When NICAM mono is received, you can select NICAM MONO or FM MONO. When NICAM stereo is received, you can select NICAM STRO or FM MONO. If the stereo signal is weak, switch to FM MONO. When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or F M MONO. SOUND & LANGUAG CONTROL Speaker Sound Output Selection In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers. Select the sound output. L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input is sent to the right loudspeaker. L+L: Audio signal from audio L input is sent to left and right loudspeakers. R+R: Audio signal from audio R input is sent to left and right loudspeakers. 9

97 ON-SCRN MNU LANGUAG / COUNTRY SLCTION The installation guide menu appears on the TV screen when it is switched on for the first time. Select your desired language. Select your country. * If you want to change Language/ Country selection MNU Select OPTION. Select Menu Language or Country.! Save. NOT Select your desired language or country. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. G If you do not finish the set-up Installation Guide by pressing RTURN or if you time out on the OSD (On Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on G If you select the wrong local country, teletext may not appear correctly on the screen and some problems may occur during teletext operation. G The CI (Common Interface) function may not be applied based on country broadcasting circumstances. G DTV mode control buttons may not function based on country broadcasting circumstances. G In country that Digital broadcasting regulation isn t fixed, some DTV function may not work depending on digital broadcasting circumstances. G The Country Setting "UK" should only be activated in UK. G If the country setting is set to "--", uropean terrestrial digital standard broadcasting programmes are available, but some DTV functions may not work properly. SOUND & LANGUAG CONTROL 95

98 SOUND & LANGUAG CONTROL LANGUAG SLCTION (IN DIGITAL MOD ONLY) The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed. When the languages you selected as the primary for Audio Language and Subtitle Language are not supported, you can select language in secondary category. MNU Select OPTION. MNU Select OPTION. Select Audio Language or Subtitle Language. Select Hard of Hearing( ). Select your desired language. Select O n or Off. SOUND & LANGUAG CONTROL Save. < Audio Language Selection > G When two or more audio languages are broadcast, you can select the audio language. G When AAC, Dolby Digital or Dolby Digital PLUS received, you cannot select the L+R, L+L or R+R. Q. MNU Select Audio Select an audio language. Press the RTURN button to move to the previous menu screen. Display N.A Audio Language OSD Information Select L+R, L+L or R+R. Status Not Available MPG Audio Dolby Digital Audio Audio for Visual Impaired Audio for Hearing Impaired Dolby Digital Plus Audio AAC Audio < Subtitle Language Selection > G When two or more subtitle languages are broadcast, you can select the subtitle language with the SUBTITL button on the remote control. G Press the button to select a subtitle language. Subtitle Language OSD Information Display N.A Status Not Available Teletext Subtitle Subtitle for Hard of Hearing - The audio/subtitles can be displayed in a simpler form with to characters broadcast by the service provider. - When you select supplementary Audio (Audio for Visual/Hearing Impaired ) the TV may output a part of the Main audio. 96

99 TIM STTING CLOCK STUP The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no DTV signal.) You must set the time correctly before using on/off timer function. When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal. Once Clock is set in DTV mode, you cannot change time, but if the city name in Time Zone is changed into offset, you can change time by hour. TIM Clock Off Time On Time Sleep Timer : Off : Off : Off TIM Clock Off Time On Time Sleep Timer : Off : Off : Off Date 0 Month Mar Year 007 Hour 6 Minute 09 Time Zone F London G GMT Close MNU Select TIM. Select Clock. Select either the year, date, time or Time Zone option. TIM STTING Set the year, date, time and Time Zone options. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 97

100 TIM STTING AUTO ON/OFF TIMR STTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. The Off time function overrides the On timer function if both are set to the same time. The TV must be in standby mode for the On timer to work. TIM TIM Clock Off Time On Time Sleep Timer : Off : Off : Off Clock 5 Feb. 005 :6 Off Time : Repeat F On Time : Off Off G Sleep Timer Hour : Off 00 Minute 00 Mode DTV Programme Volume 0 Close TIM STTING MNU Select TIM. When the On Time is selected, 5 6 Select Off Time or On Time. Select Repeat. Select Off, Once, Daily, Mon ~ Fri, Mon ~ Sat, Sat ~ Sun or Sun. Set the hour. Set the minutes. To cancel On/Off Time function, select Off. For On Time function only Select Mode. Select TV, DTV, Radio, AV, AV, AV(xcept for /50PQ0**, /50PQ**), Component(xcept for /50PQ0**,/50PQ**), RGB(xcept for /50PQ0**,/50PQ**), HDMI, HDMI(xcept for /50PQ0**,/50PQ**) or HDMI(xcept for /50PQ0**,/50PQ**). Set the programme. Adjust volume level at switch-on. Press the MNU button to return to normal TV viewing. 98 Press the RTURN button to move to the previous menu screen.

101 SLP TIMR STTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. Q. MNU Select Sleep Timer. Select Off, 0, 0, 0, 6 0, 9 0, 0, 80 or 0 Min. When you switch the TV off, the preset sleep timer is cancelled. You can also adjust Sleep Timer in the TIM menu. TIM STTING 99

102 PARNTAL CONTROL / RATINGS ST PASSWORD & LOCK SYSTM nter the password, press 0, 0, 0, 0 on the remote control handset. LOCK LOCK Lock System : Off : Off Lock System Off: : Off Set Password Block Programme Set Password Block Programme On Parental Guidance : Off Parental Guidance : Off Input Block Input Block MNU Select LOCK. If you forget your password, press 7, 7, 7, 7 on the remote control handset. PARNTAL CONTROL / RATINGS Select Lock System. Select O n. Set the password. Input a -digit password. Be sure to remember this number! Re-enter new password for confirm. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 00

103 BLOCK PROGRAMM Blocks any programmes that you do not want to watch or that you do not want your children to watch. It is available to use this function in Lock System O n. nter a password to watch a blocked programme. YL TV DTV Radio TV LOCK Lock System Set Password Block Programme Parental Guidance Input Block : Off : Off YL TV YL TV TV Stockholm 5 YL FST 6 CNN 8 YL 9 YL Teema TV Film TV Fakta 50 TV00 Pr. Change Navigation P Page Change RTURN Previous Block/Unblock MNU Select LOCK. Select Block Programme. nter the Block Programme. GRN Select a programme to be locked. PARNTAL CONTROL / RATINGS Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 0

104 PARNTAL CONTROL / RATINGS PARNTAL CONTROL (IN DIGITAL MOD ONLY) This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This TV is programmed to remember which option it was last set to even if you switch the TV off. Prevents children from watching certain adult s TV programmes, according to the ratings limit set nter a password to watch a rated programme. LOCK LOCK Lock System Set Password Block Programme Parental Guidance Input Block : Off : Off : Off Lock System Set Password Block Programme Parental Guidance Input Block : Off : Off F Off G Close MNU Select LOCK. PARNTAL CONTROL / RATINGS Save. Select Parental Guidance. Make appropriate adjustments. Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 0

105 INPUT BLOCK nables you to block an input. LOCK LOCK Lock System Set Password Block Programme Parental Guidance Input Block : Off : Off Lock System Set Password Block Programme Parental Guidance Input Block : AV Off AV AV : Off Component RGB HDMI HDMI HDMI F Off G Off Off Off Off Off Off Off (xcept for /50PQ0**, /50PQ**) Close MNU Select LOCK. Select Input Block. Select the source. Select Off or O n. PARNTAL CONTROL / RATINGS Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 0

106 PARNTAL CONTROL / RATINGS KY LOCK The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing. OPTION OPTION Audio Language : nglish Subtitle Language : nglish Hard of Hearing( ) : Off Data Service : MHG Country : UK Input Label SIMPLINK : On Key Lock : Off Audio Language : nglish Subtitle Language : nglish Hard of Hearing( ) : Off Data Service : MHG Country : UK Input Label SIMPLINK : On Key Lock Off : Off : Off On PARNTAL CONTROL / RATINGS MNU Save. Select OPTION. Select Key Lock. Select On or Off. Set ID : Off In Key Lock O n, if the TV is turned off, press the INPUT, P D or button on the TV or POWR buttons on the remote control then the set will be turned on. Set ID : On In Key Lock O n, if the TV is turned off, press the INPUT, P D or button on the TV or POWR, INPUT, P or NUMBR buttons on the remote control then the set will be turned on. With the Key Lock On, the display X Key Lock On appears on the screen if any button on the front panel is pressed while viewing the TV.(xcept for r / I button) Press the MNU button to return to normal TV viewing. Press the RTURN button to move to the previous menu screen. 0

107 i TLTXT This feature is not available in all countries. AV MOD NRGY SAVING Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. LIST Q.VIW The teletext decoder of this TV can support the SIMPL, TOP and FASTXT systems. SIMPL (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTXT are more modern methods allowing quick and easy selection of teletext information. SWITCH ON/OFF MNU MUT RTURN / XIT Press the TXT button to switch to teletext. The initial page or last page viewed appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the TXT button to switch off teletext. The previous mode reappears. SIMPL TXT A Page selection Q.MNU INFO GUID FAV MARK FRZ nter the desired page number as a three digit number with the NUMBR buttons. If during selection you press a wrong number, you must complete the three digit number and then re-enter the correct page number. The P button can be used to select the preceding or following page. TOP TXT The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. A Block / group / page selection TLTXT With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the P button can be used. The red button returns to the previous selection. Alternatively the P button can be used. A Direct page selection As with SIMPL teletext mode, you can select a page by entering it as a three digit number using the NUMBR buttons in TOP mode. 05

108 TLTXT FASTXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. A Page selection Press the T. OPT button and then use button to select i menu. Display the index page. You can select the pages which are colour coded along the bottom line with corresponding coloured buttons. AS with SIMPL teletext mode, you can select a page by entering its three digit page number with the NUM- BR buttons in FASTXT mode. The P button can be used to select the preceding or following page. SPCIAL TLTXT FUNCTIONS Press the T. OPT button and then use button to select the Text Option menu. i A Index Select the each index page. A Time When viewing a TV programme, select this menu to display the time at the top right hand corner of the screen. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RD/GRN, or NUMBR buttons. Text Option Index Time Hold Reveal Update Close TLTXT A Hold Stops the automatic page change which will occur if a teletext page consists of or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this menu is selected the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inactive.? A Reveal Select this menu to display concealed information, such as solutions to riddles or puzzles. A Update Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then display will change to the page number. Select this menu again to view the updated teletext page. 06

109 DIGITAL TLTXT *This function works in UK/ Ireland only. The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You should select off in the subtitle language menu to display teletext by pressing the SUBTITL button. TLTXT WITHIN DIGITAL SRVIC Press the numeric or P button to select a digital service which broadcasts digital teletext. To know which are digital teletext services, refer to the PG service list. Follow the indications on digital teletext and move onto the next step by pressing TXT,,, RD, GRN, YLLOW, BLU or NUMBR buttons and etc.. To change digital teletext service, select a different service by the numeric or P button. TLTXT IN DIGITAL SRVIC Press the numeric or P button to select a certain service which broadcasts digital teletext. Press the TXT or coloured button to switch on teletext. Follow the indications on digital teletext and move onto the next step by pressing,, RD, GRN, YLLOW, BLU or NUMBR buttons and so on. Press the TXT or colour button to switch off digital teletext and return to TV viewing. DIGITAL TLTXT Some services may allow you to access text services by pressing the RD button. 07