MAIN C ATALOG valid fr om June 2016

Transcription

1 AI M N G LO TA CA lid va m fro 2 ne Ju 6 01

2 For the enhancement of paper! Foellmer has proudly taken up the service in the graphic industry more than 65 years ago. The company is being led by the third generation of Foellmer. Our flexible team is built by young and motivated people working hand in hand with long-term and experienced employees. The variety of innovative products paired with the reliability of our company guarantee worldwide success. With this brochure we want to show you the width of our range of products in order to arouse your curiousity. For further information consult our catalogue or our webpage or visit our showroom or call us by phone +49(0)7720/ We will be pleased to support you. The operational examples included in this brochure show only a few different possibilities. Please send us your sample material for testing or visit us with your products in order to work out a successful solution together. Challenge our know-how, we are looking forward to it. JOSEF FOELLMER GMBH Werner Foellmer Further information: Michael Foellmer

3 Index Index All articles and further information you will find on our website: paper drill bits and accessories page 4-7 The original paper drill bits with the capital F drilling and punching page 8-10 perforating / grooving / creasing page corner rounding / die cutting page stitching page counting / tab inserting page Josef Foellmer Inventor of the tab inserter folding / cutting / binding page other accessories / miscellaneous page 42 Sales terms and delivery conditions page 43

4 Paper drill bits Paper drill bits range > drill bits and accessories for all brands worldwide! > all paper drill bits are available with an external cutting edge and are especially suitable for the drilling of leather, textiles, etc. > individual diameters and lengths can be offered on special request. EURO-DRILL 11-shank EURO-DRILL 16-shank DLM-DRILL EURO-DRILL 24-shank LIHIT 52/80/95-DRILL Challenge-DRILL Multidriller Hollow punches list of all paper drill bits see price list or Further information:

5 Paper drill bits Paper drill bits - order notes Please indicate WITH ORDER: Type - Drilling-Ø Shank-Ø Drilling length Coating e.g. FE = FE shank-ø Coatings: 1 = high quality steel (without coating) 2 = chromium plated 3 = red ring coated 4 = glide coated 7 = HTC Packing unit: 5 pieces list of all paper drill bits see price list or: DRILL-Ø DRILLING LENGTH TOTAL LENGTH Paper drill bits from 5,67 Sharpening from 3,95 SOAG-DRILL BIELOMATIK-DRILL IDEAL-DRILL DLM-DRILL 4/5

6 Paper drill bits // Accessories Accessories Paper drill bits drill piercer PIN for paper drill bits Ø 2,0 3,0 mm for paper drill bits Ø 3,5 4,5 mm for paper drill bits Ø 5,0 5,5 mm for paper drill bits Ø 6,0 7,0 mm for paper drill bits Ø 7,5 F F F F F Pins for PIN for paper drill bits Ø 2,0 3,0 mm for paper drill bits Ø 3,5 4,5 mm for paper drill bits Ø 5,0 5,5 mm for paper drill bits Ø 6,0 7,0 mm for paper drill bits Ø 7,5 T T T T T drill piercer POWER including pusher and pin for drills Ø 2 15 mm (without drill) special cardboard drilling base A 4 F T greasing paper increases the gliding of youdrills on the in- and outside 10 sheets A 4 = 1 package T sheets A 4 = 1 package (premium quality) T DRILL-EASE greasing stick T greasing and cooling spray reduces the frictional resistance, cools and avoids static electrification during paper drilling content: 400 ml T BO-REI-DO paper drill cleaning and storage box (without paper drills) BO-REI-DO Refill bottle BO-REI-DO SET contains: POWER F , BO-REI-DO T and greasing paper A4 T T T X Further information:

7 Paper drill bits // Accessories manual paper drill sharpener model ROTO for mm shaft paper drills for LIHIT paper drills (conical shaft) F F motorized paper drill sharpener model ROTO-AM for mm shaft paper drills for LIHIT drills (conical shaft) F F spare carbide tip for ROTO and old model TURBO resharpening of carbide tips T V drill sharpener STANDARD with carbide tip F spare carbide tip for STANDARD or PIN spare ceramic tip for STANDARD + PIN (to smoothen) T T whetstone T /7

8 > with our modern paper drilling machines it is possible to convert different materials without any problem. > for each requirement we have the suitable tool. DRILLING // PUNCHING > paper drill bits for paper, foils, leather, textiles, ect. > manual punching devices for smaller editions. Features: > 1-spindle to 5-spindle paper drilling machines > depending on the model, with hand lever or stroke release by electrical foot pedal, adjustable hole distance, sliding table, infinitive throat depth (for duplex-use drilling) easy-to-operate programming rail, variable drilling speed, drill cooling, drill lubrication system and automatical waste exhaust.

9 Drilling // Punching 1/2-spindle-paper drilling machine model S-1 F This machine has a smooth-running sliding table with a 6-fold program shaft for the drilling of various most frequently used hole patterns. drilling-ø 2,0 10 mm, drilling height 50 mm height of the back stop 28 mm with sliding table motor 230V AC/115V AC, 0.25kW, 50/60 Hz table 470 x 253 mm space mm: B 800 x T 550 x H 850 model office-2 F This machine is developed especially for the usage in offices and administrations for the drilling of the common filing hole patterns. drilling-ø 6,0 mm, drilling height 50 mm, fix 80mm height of back stop mm motor 230 V AC/ 115V AC, 0.36 kw, 50/60 Hz table 300 x 215mm space mm: B 460 x T 460 x H 350 find suitable drill bits on 8/9

10 Drilling // Punching Punching punching model VL 4 for 2-4 holes adjustable hole distance from 1,5 cm to 24 cm hole-ø: 6 mm punch against bottom die, max. stack height: ~ 30 sheets completely with 4 hollow punching elements Ø 6 mm F hollow punching element Ø 6 mm, for model VL 4 T punching model LOC/20 double-hole punching, 8 cm distance max. stack height 20 mm (about 200 sheets)* including hollow punching elements Ø 6 mm punching against bottom die F * depends on the paper quality punching model LOC/20 DUO 4-hole punching, 8 cm distance including hollow punching elements Ø 6 mm punching against bottom die F Hollow punching elements for model LOC/20 and LOC/20 DUO Ø 6 mm T punching model LOMA punching of the documents by lever drawl simultaneous bonding of a strip of ductile around the hole for punching without reinforcement switch off the strip feed F reinforcement rolls for model LOMA box with 6 rolls of 10 meter T

11 product highlights: > manual perforating and register punching machines > motor perforating and register punching machines > rotary perforating and grooving machines usual perforating tools, slot perforating tools, punching tools for square holes, groove combs in various types and as a matter of course wire-o-punching tools as well. creasing and perforating devices with combined tools for slot perforation and creasing with smaller and wider groove PERFORATING // GROOVING // CREASING 10/11

12 Perforating // Grooving // Creasing Only 4 screws are needed to transform the perforating machines model EXPO and EX/R into an efficient heavy-duty motor driven machine (see T ). FOELLMER heavy-duty manual perforating + creasing machine model EXPO operating width: 460 mm (DIN A 3) table size: 600 x 350 mm (standard) capacity: sheets, depending on tool and material insertion height: 2,5 mm, depending on tool and material model EXPO 50 ditto, operating width for grooving 500 mm F F base frame T FOELLMER motorperforating + creasing machine model 45 ME working width: 460 mm (DIN A 3) table size: 600 x 350 mm (standard) capacity: sheets, depending on the tool and material insertion height: 2.5 mm, depending on the tool and material motor: 400 V three-phase, 0.55 kw, 50/60 Hz F model 50 ME ditto, working width for grooving 500 mm F motor perforating machine base frame for upgrading of model EXPO and EX/R to model 45 ME / 50 ME, complete, 60 kg net T > picture with two distributor boxes (optional) blocking rollers (1 set = 4 pieces) T FOELLMER manual perforating and register punching machine Model EX/R operating width: 460 mm (DIN A 3) table size: 770 x 350 mm (standard) capacity: sheets, depending on tool and material register punching: max. 5 sheets/ 80g insertion height: 2,5 mm, depending on tool and material F motor perforating and register punching machine model 45 ME/R motor: 400 V 3-phase, 0.55 kw, 50/60 Hz. F Further information:

13 Perforating // Grooving // Creasing accessories for F F tray (extra) for perforating machine, format: 530 x 300 mm O > picture with additonal step stop ledges, back stop and side stop > large choice of perforating and grooving types > We also manufacture & repair tools of foreign brands. additional table price surcharge for 350 mm to 500 mm depth back stop for double guiding rail at the back, to be ordered separately additional stop for E for frame perforation back stop with sliding blocks for stepped work small side stop clip-on flag for rear stop basic perforating tool tear off perforation (hole 1,1 mm) semi-perforation possible! slot perforation semi-perforation possible! spare cutting rails for T punching tool for square holes plastic binding working width DIN A 4 plastic binding working width DIN A 3 O E E E E T T T T T groove comb shape of the groove depends on the material narrow groove comb with pointed groove: width mm wide groove comb with pointed groove: width mm round groove comb: width mm The groove has a round shape of a book spine. T T T double groove comb as well as special groove shapes for various Wire-O-Punching tools see our seperate information leaflet! T /13

14 Perforating // Grooving // Creasing manual grooving and perforating device model C315 working width: 315 mm capacity: approx. 4 sheets 80 g/m², cardboard up to approx. 300 g/m² combined tool for serrating and grooving with narrow and wide groove F option: additional step stop ledges manual grooving model C435 working width: 435 mm, capacity: cardboard up to approx. 300 g/m² contains tools with narrow and wide groove T F option: additional step stop ledges T electrical grooving and perforating model CM450 working width: 450 mm capacity: approx. 4 sheets 80 g/m², cardboard up to approx. 400 g/m² combined tool for serrating and grooving with narrow and wide groove motor: 230 V, 0.40 kw F option: additional step stop ledges T with stapel feeder Further information: electrical grooving and perforating model CM450 SA F max. working width/-length: 450 mm/unlimited max. capacity: grooving: 400 g/m², perforating: 250 g/m² grooving width: 1,0 mm: g/m², 1,3 mm: g/m², 1,6 mm: g/m² max. number of grooves: 15 per sheet number of programs: 5 min. grooving distance: 2 mm speed: approx sheet/hour (paper format: DIN A4) motor: 230 V / 50 Hz including combined tool for slot perforating and grooving automatic single sheet feed electrical grooving and perforating model CM450 SA2 NEW!!! F

15 Perforating // Grooving // Creasing motor perforating and grooving machine model MP 50 working width: 50 cm capacity: max. perforating thickness Ø 1 mm = 0,7 mm approx. 10 to 12 sheets, depending on tool and material motor: 230 V, 50 Hz, 0.55 kw model MP 71 working width 71 cm see above mentioned, ditto 71 cm working width F F normal perforating tool Ø 1,0 mm (half-perforation possible) perforating tool Ø 4,0 mm = 1/3 inch perforating tool Ø 6,0 mm = 1/2 inch perforating tool 4 x 4 mm = 1/3 inch perforating tool 4 x 4 mm = 1/3 inch perforating tool 3 x 8 mm= 1/2 inch slot perforating tool T T T T T T T groove comb with narrow and wide groove width: 1,0 + 1,5 mm T motor perforating and grooving machine model V/75 working width: 750 mm insertion height: 0,8 mm, depending on tool and material motor: 400 V 3-phase, 50/60 Hz, 0.55 kw F normal perforating tool Ø 1,1 mm perforating tool Ø 4,0 mm perforating tool Ø 6,0 mm perforating tool 4 x 4 mm perforating tool 3 x 8 mm T T T T T groove comb with narrow and wide groove width: 1,0 + 1,5 mm T /15

16 Perforating // Grooving // Creasing rotary perforating and grooving machine working width: 520 mm capacity: up to max sheets DIN A 4/hour depending on grammage and paper quality grammage of paper from approx. 40 to 300 g/m² motor: 230 V one phase, 50/60 Hz, kw with suction feeder!!! > various perforating and grooving tools available. Request our separate brochure! 4 tools of your choice with their opposing wheels: perforating wheels 0,5 : 2,09 mm (T ) micro perforating wheels 50 teeth per inch (T ) total cutting and half cutting wheels (T ) die plates for perforating and cutting(t ) grooving wheels standard 0,5 mm (T ) die plates for grooving standard 0,8 + 1,0 mm (T ) Clear construction with 2 circuits for vacuum air and separation air. Electronic speed control, very low noise at high speeds. Programmable totalizer with stop function. Adjustable side guides with individually adjustable separating air valves and aspiration cylinder for the careful feeding of the material to be processed. > cutting up pressure sensitive paper down to the base. max. number of tools: Master 520 Air = approx. 15 pieces (depending on material) min. working width: 90 mm min. working length: 120 mm min. distance of the tools: perforation, microperforation, cutting= 20 mm grooving = 12 mm (smaller distances: see double grooving tools) model Master 520 Air working width 52 cm F model Master 710 Air working width 71 cm F with friction feeder!!! model Master 500 working width 52 cm model Master 700 working width 71 cm F F

17 Perforating // Grooving // Creasing Models of the line PERFOSET With our reliable models of the series PERFOSET choose between different tools as follows: punching and invalidation device for marking, securing and/or cancelling of forms like for example tender documents, identity documents, savings books or cheque cards embossing device for securing of official documents, embossing of photos or identity cards or simply for decorating business cards or letters with a logo or a coat of arms corner perforating device for perforations in the upper or lower corner of paper sheets date perforating device for marking of forms, labels, films or packagings with a date text perforating machine for perforating of multiline texts or symbols You name it! We got it! Further information: 16/17

18 CORNER ROUNDING // PUNCHING Product highlights: > The double corner rounding machine for simultaneous rounding or cutting of two corners in one operation. > Index punching machine for bound books and loosen sheets. Because of the large variety of corner rounding devices and machines, manual punchers and index punching machines it is possible for us to supply you with the most suitable machine. usable tools: corner rounding knives with radii up to 40 mm, knives for straight corner cuts up to 70 mm, hole punching tools up to Ø 25 mm, tools for angle cut, index thumb cut, display slot, steel band cut, standard steel tools, embossing tools, etc. Finding a solution for special customized tools - is a challenge we love to face! Send us a sample or a drawing!

19 Corner rounding // Punching > corner rounding, corner cutting, punching and thumb hole punching with 1 unit! corner rounding unit model CR suitable for paper, cardboard, foils stack height: max. 10 mm space requirement in mm: L 227 x W 140 x H 147 accessories: 1 holding device for small formats 4 additional cutting bases allen key for tool exchange and adjustment including knife radius 3.5 mm corner rounding unit model CR+ basic equipment as model CR with the following additonal tools: 1 knife radius 6.0 mm 1 knife radius 10 mm 1 knife straight corner cut 20 mm 1 punching tool Ø 6 mm F F for spare knives see price list thumb hole tool Ø 21 mm T cutting bases for model CR (10 pieces) T back stop with side stop + scale esp. neccessary when using the thumb hole tool NEW!!! T > Very handy for the production of individual customer samples. manual corner rounder model EH-5 F ideal pocket size device for corner rounding of photos, drawings, business cards and laminated papers suitable for paper, cardboard, foils stack height: max. 4 sheet of photographic paper knife radius 5 mm space requirement in mm: L 80 x W 80 x H 34 manual corner rounder model EH-10 like model EH-5, but with knife radius 10 mm F /19

20 Corner rounding // Punching corner rounding model RONDO-STAR suitable for paper, cardboard and foils stack height: max. 14 mm, depending on radius and material sturdy unit with big waste bins and hardwood table size mm: L 455 x W 230 F knife radius 3.18 mm (1/8 ) 38.1 mm (1 1/2 ) and straight corner cut see price list Manual punching press model FR 45 max. retaining area for the cutting die = 45 mm x 60 mm insertion height: 2 3 mm F punching shapes available for model FR 45: thumb hole standard (steel band cut) display slot standard (steel band cut) display slot, double sided (steel band cut) hole punch, several diameters (steel band cut) For high operational demands are steel tools available. Manual punching press model FMR 360 max. retaining area for the cutting die = 105 mm x 55 mm insertion height 2 3 mm T T T F punching shapes available for model FMR 360: for cheque cards: 85 x 54 mm, radius 3 for window envelopes DIN long: 90 x 45 mm, radius 3 for window envelopes C 4: 90 x 55 mm, radius 3 other shapes and dimensions according to your drawing / sample T T T Further information:

21 Corner rounding // Punching corner rounding machine model EP suitable for paper & thin cardboards stack height: max. 45 mm table size in mm: 250 x 250 space requirement in mm: L 410 x W 380 x H 250 accurate fine adjustment by screws F Corner perforation 20 mm possible upper - and lower knife radii 3-18 mm 20/21

22 Corner rounding // Punching Punching and corner rounding machine model HE / F suitable for paper, cardboard, foils stack height: max. 65 mm after punching operation it returns to the starting position available radii: 3 40 mm table size in mm: length 220 x depth 260 machine dimensions in mm: L 500 x W 250 x H 500 machine variations: HE Manual corner rounding machine F Foot corner rounding machine F F > all models work with upper- and lower knives, the punching tools with punch and die. > protection gutter for knives/tools is supplied with the machine. > list of all corner rounding knives and accessories see We also supply pneumatic and embossing presses for various applications - for example corner rounding, display slot, thumb hole, oblong hole, etc. Request the special leaflet! Further information:

23 Corner rounding // Punching Accessories for models HE / F corner rounding knife radii 3 mm 20 mm max. stack height with radius: 3 20 mm = 65 mm mm = 10 mm larger radii and special radii straight corner cut max. stack height with cutting length: see price list on request see price list 30 mm = 65 mm, 50 mm = 30 mm, 70 mm = 10 mm angle cut stack height 10 mm see price list index cut stack height 3 mm, it is delivered a suitable wiper with every tool see price list Other shapes: index thumb cut D 22 mm see price list index thumb cut stack height 10 mm 21 oblong hole see price list 5,5 stack height 2 mm oblong hole* 1,5 21 rectangular hole* rectangular hole stack height 2 mm see price list display slot tool see price list stack height approx. 2 mm standard steel tool display slot HE/M ditto, double sided stack height approx. 2 mm see price list standard steel tool display slot double sided HE/M Special tools on request. 22/23

24 Corner rounding // Punching Punching and corner rounding machine model ERM suitable for paper, cardboard, foils, plastic plates thin aluminium sheet metal stack height: max. 100 mm motor: 400 V 3-phase, 0.75 kw, 50/60 Hz release through foot pedal adjustable pressure device straight corner cut: up to 30 mme table size in mm: depth 230 x width 430 machine dimensions in mm: D 390 x W 430 x H 1340 F accessories for model ERM see price list > upper and lower knives standard > mobile with blocking rolls corner rounding knife (upper and lower knife) for model ERM radius 3 mm 11 mm see price list larger radii and special radii on request with each tool a corresponding stripping device is supplied. straight corner cut corner rounding cut Further information:

25 Corner rounding // Punching > all tools are made of high quality steel and can easily be changed. Double corner rounding machine model ZE 42 with upper and lower knives for simultaneous rounding or cutting of 2 corners stroke only starts by two hand operation tool stroke: max. stack height 100 mm table size in mm: L 860 x W 400 distance between tools in mm: min. 56 / max. 420 rough adjustment of formats by clamping device precise adjustment possible through spindle-usage automatic alignment of pile by sideward - movement of the right head punching unit on a die set number of strokes: 70 strokes / min. working height in mm: 880 space requirement in mm: L 920 x W 700 x H 1200 electrical equipment: 400 V 3-phase, 50/60 Hz, 0.75 kw, waste slide for punching waste without knives F > stack height depends on the material and tools being used. corner rounding knives: max. 90 mm straight corner cut max. 90 mm corner rounding knives upper and lower knife with a specially sharpened edge, radii at choice: radii 3 mm 20 mm straight corner cut other tools: holding device for introducing formats smaller than 120 mm width with adjustable stops device on a die set mounted on feeding table automatic alignment of products when introduced with lifting device for stack see price list see price list T sliding stop frontal T > automatic alignment of the pile by sideward movement of the right head > guarantees faultless corner rounding 24/25

26 Corner rounding // Punching electrical roller punching machine model RS 440 for punching and grooving of paper and cardboard working width: max. 440 mm cutting stroke: max. 52 mm size of steel band cutting tools: max. DIN A 3 distance between cylinders: min. 20 mm, max. 72 mm material thickness: max. 1,5 mm machine dimensions in mm: L 765 x W 510 x H 385 motor: 230 V, 50 Hz F operating mode: The material is set onto a steel band cutting tool, one by one and covered by a special plate. After tripping the foot pedal, the complete package is transported through the roller press. This simple method is suitable for a precise processing of smaller quantities. steel band cutting tools: on request special customized production of cutting tools. Index punching machine model RG for bound books and loose sheets max. insertion height: 20 mm length of material to be stamped: min. 80 mm, max. 310 mm depth of index cut: min. 3 mm, max. 25 mm with wiper pin, automat. advance of the working table (24 stop rings), with height adjustment for thicker books electrical equipment: 400 V, 3-phase, 50/60 Hz, 0.55 kw completely with collecting containers for punching waste without tools F available tools (according to order sheet): > For smaller quantities of material we recommend our index punching machines of the series INDEX. request special leaflet Further information:

27 We provide suitable models and all required accessories for pad and saddle stitching which uncompromisingly correspond to the high demands of the customer! Depending on the model you can work with standard staples or loop staples. Also round wire, which can be flattened if necessary, can be used by different models. STITCHING 26/27

28 Stitching brochure and pad stitching machine model KL/1 F for normal and loop staples with universal working table for pad and saddle stitching. number of stitching heads: 1 3 distance of stitching heads: mm stepless magazine capacity/stitching head: 400 staples capacity/stitching head: approx stitches/hour max. insertion height: with stitching head 24 = 17 mm, with stitching head 50 = 25 mm number of strokes: 4800/hour, working height: 880 mm machine dimensions in mm: L 620 x W 800 x H 1200, table width: 620 mm throat depth for saddle stitching: 300 mm complete with 2 stitching heads no. 24, with centering and pressing device motor 230 V one phase, 50/60 Hz ditto, complete with 2 stitching heads no. 50 F motor 400 V 3-phase current, 50/60 Hz F ditto, completely with 2 stitching heads no. 50 F brochure and pad stitching machine model KL/2 basic equipment as model KL/1 number of stitching heads: 1 5 distance of stitching heads: mm stepless machine dimensions in mm: L 620 x W 900 x H 1200 completely with 2 stitching heads no. 24 with centering and pressing device motor 400 V 3-phase current, 50/60 Hz motor 230 V one phase, 50/60 Hz F F stitching head no. 24 for KL/1 + 2 insertion height: max. 25 mm T stitching head no. 50 for KL/1 + 2 insertion height: max. 25 mm T > staples for stitching head no. 24: 24/6 20, 26/6 + 8, 24/6 + 8 Ri > staples for stitching head no. 50: 50/8 27 cutoff of the stitching (at empty magazine) extension magazine filling / stitching head T T Further information:

29 Stitching > for round wire: grade of flattening can be adjusted according to the needs, reduces required wire to a minimum. wire stitching machine model JW-35 for pad and brochure stitching universal working table (L 600 x W 195 mm) for 2 different positions with adjustable back and side stops, 1 stitching head round wire: no is flattened during feeding variable stitching speed up to max. 210 stitchings per minute stitching thickness: staples clinched: up to 22 mm; not clinched: up to 30 mm throat depth for saddle stitching: 355 mm motor: 230 V, 50/60 Hz, 0.2 kw space requirements in mm: L 610 x W 610 x H 1650 model JW-35/25 stitching capacity, staples clinched: up to 25 mm Topmodel!!! F F > no. of stitching heads: 2 bis 4 > option: loop stitching > for models JW-2H and JW-4H multiple head wire stitching machine model JW-2H for pad and brochure stitching machine with 2 stitching heads, max. 3 stitching heads possible universal table (L 600 x W 190 mm) for 2 different positions with adjustable back and side stops round wire: no. 26 to 30, automatic wire threading stepless variable stitching speed up to max. 200 stitchings per minute stitching thickness: max. 6 mm, min. 2 sheets stitching distance: max. 160 mm, center center: min. 45 mm throat depth for sadle stitching: 330 mm motor: 230 V, 50/60 Hz, 0.2 kw space requirements in mm: L 610 x W 870 x H 1350, complete with 2 stitching heads model JW-4H machine with 2 stitching heads, max. 4 stitching heads possible basic equipment as model JW-2H, stitching distance max. 360 mm space requirements in mm: L 800 x W 870 x H 1350 stitching head for models JW-H F F T stitching head for loop stitching model Magnatek suitable for models: JW-2H and JW-4H round wire no. 25, weight: 2020 gramms space requirements in mm: L 80 x W 47 x H 280 T /29

30 Stitching > suitable for round - and flat wire > accessories: flat wire on request wire stitching machine model FD-S F for pad and brochure stitching, stitching capacity: max. 180 stitchings per minute, stitching thickness: min. 2 sheets, staple clinched: up to 22 mm*, not clinched: up to 40 mm (* valid for 1 mm thick round wire) loop staples clinched: up to 4 mm, min. 2 sheets wire-ø 0,5 1 mm, round wire no. 26 to 20, flat wire up to diagonals of 1 mm thickness 0.5 to 0.7 mm internal width of staples 13 mm, wire consumption per stitching: mm single cycles or continuous stitching operation space requirements in mm: 700 x 720 x 1245, table height: 820 mm motor: 230 V one phase, 50/60 Hz, 0.4 kw with safety device according to the CE standard 400 V 3-phase-motor on request option: set for heavy duty work loop stitching: min. 2 sheets up to max. 4 mm X stapler model 106 T for pad and saddle stitching, for standard and loop staples front loading/ capacity: 210 staples 66/6 8 mm universal table for 2 different positions with adjustable back and side stops infinitely adjustable hitting force and throat depth throat depth for pad stitching: max. 100 mm capacity: pad stitching up to 40 sheets (80 g/m²) saddle stitching up to 20 sheets (80 g/m²) motor: 230 V AC, 50/60 Hz dimensions: width 250 mm with wide stitching table width 60 mm with narrow stitching table length 250 mm, height 438 mm complete with table 250 x 150 mm and pedal switch F with accessories listed below you can combine two devices for double stitching: connection kit for connecting two or more staplers 106 T for simultaneous multiple stitching X insert stapler = stitching insert for 106 T for loop staples 6 mm by using the insert stapler, model 106 T becomes a perfect loop stitching machine T staples 26/6, 1 package = 5000 pieces staples 26/8, 1 package = 1000 pieces loop staples 6 mm, 1 package = 1000 pieces loop staples 6 mm, 1 package = 1000 pieces T T T T Further information:

31 Stitching saddle and pad stapler model RINGO for loop staples and standard staples stop rail for common formats stitching distance 80 mm loop staples: Ri24/6 and Ri24/8 stitching capacity: up to approx. 50 sheets staples: 24/6, 24/8 and 24/10s stitching capacity: up to approx. 100 sheets F ditto model RINGO-DUO for double stitching F stapler model 120 normal with spring box loading mechanism loading capacity: 100 x 23/8 23/20, 50/8 50/20 stitching capacity: up to approx. 200 sheets throat depth: 100 mm F stapler model 120 long as model 120 normal, but throat depth: 250 mm = also fold stitching F lever stapler model 17/20 solid version loading capacity: 100 x 23/8 23/24, 50/8 50/20 stitching capacity: up to approx. 250 sheets throat depth: 100 mm F table plate for model 17/20 T For staples and round wire for all our models and foreign brands see 30/31

32 COUNTING // TAB INSERTING > paper counting with batch counting program > tab inserting, separating, weighing... paper counting machines with tabbing for paper weights from 22 to 255 g/m 2 accurate tabbing is guranteed with all models friction counting feeder for separating, counting and feeding of flat products counting scales for color mixing devices in different models available.

33 Counting // Tab inserting Approved quality Tab inserting devices Our tab inserting devices DUPLIKATOR have proven their reliability for many decades and are applicable to every delivery independend on their height. It doesn t make any difference whether the tabber is placed at printing presses or cardboard-/paper processing/cutting machines. Due to the compact design of both models, we always will find a suitable place for its installation. Other than that, we can provide different lengths and forms of paper channels. The SUPTRAMAT allows the printer during the production process to remove paper to be checked or marks waste-paper. At the same time the package size marked by the tabs is being corrected accordingly. Josef Foellmer: The INVENTOR of the tab inserting devices! > various channel lengths an types are available > counts, divides, inserts tabs tab inserter DUPLIKATOR model DigiTab 2010 Plus with touch-screen operation all kinds of pulse generator respectively trigger possible 230 V ~ main supply, connected load 0.1 kw space requirements in mm: L = 187, H = 97 / 67, W = 132 infinitely adjustable tab length (standard mm) and tab retaining time (approx sec.) equipped with electronic preselection counter totalizer and SUPTRAMAT, left channel touchscreen (display) in the back Quantity discounts on request! F connection box DigiTab + 94 E special specification V > Tab inserter DUPLIKATOR model DigiTab 2010 Plus at the high end stack. power cable 230 V S ,5 m with plug is required, esp. for the temporary operation with an extension cable to the connection box sensor a machine-independent pulse generator S Please let us advice you which impulse generator to use! 32/33

34 Counting // Tab inserting Accessories for models DigiTab/Typ 94 1 external button for SUPTRAMAT E for operation at a press delivery including connection cable 5 meter + plug stand, movable for model DigiTab with telescope for deliveries mm X In your orders please specify the lowest and highest delivery altitude of your machine. ditto with retaining element X stand conversion kit for new telescope X paper channel (extra) for model DigiTab complete with knife total length 200 mm 900 mm see price list > Channel lengths can be chosen individually. The first channel, at the first purchase of tabinserter DIGITAB comes for FREE!! No cost charged for the first channel! bent channel with electric knife ditto, only surcharge (DigiTab) surcharge for pneumatic tongue, complete, horizontal lift connection box with electronics for the power supply of external sensors (photocells etc.), primary 230 V AC, secondary 24 V DC E E E E adapter/ connection cable with plug for Manroland E > bent channel with electric knife magnet switch (shutter) complete connecting kit for SM 52 without interface with connection box 24 V, magnetic switch and accessories T T sheet counter various models with built-in impulse generator for DUPLIKATOR exchange price Please return the old counter to us. E > We also produce tab inserters for special applications. Please inquire! lease price for tab inserters price for free domicile and the installation of the DUPLIKATOR by company Foellmer V V Further information:

35 Counting // Tab inserting paper rolls pink for DUPLIKATOR * 22 mm wide, approx. 120 m long external-ø 145 mm sufficient for approx tabs packing unit = 20 rolls T *perfect order quantity 1 PU 2 PU 4 PU 8 PU and so on paper roll B2 pink 10mm width, approx.105m o-ø130mm c-ø25mm gsm-100 g/m² PU = 12 rolls T paper roll W pink 13mm width, approx. 265m o-ø 214mm c-ø76mm gsm-100 g/m² PU= 20 rolls T paper roll B pink 15mm width, approx.120m o-ø130mm c-ø25mm gsm-100 g/m² PU = 25 rolls T We also sell paper rolls for OTHER BRANDS! 34/35

36 Counting // Tab inserting > The ROTOMATIK models are microprocessor controlled, combined with sturdy mechanics. paper counting machine ROTOMATIK model 1000 F counting speed max sheets/min. * paper size min. 55 x 90 mm paper size max x 1200 mm paper weight: 22 bis 255 g/m² * stack height: max. 300 mm tabbing: every 2. to sheet equal batches, up to 20 different batches in 1 stack continuous counting with and without tab insertion security counting, tab insertion after a total amount is reached preselection counter = 4 digits, batch counter = 4 digits, total counter = 6 digits space requirements in mm: height 1305, depth 1005, width 900 power: 230 V~, 50/60 Hz, 0.7 kw completely with all standard accessories and with table for paper size approx. 550x 790 mm * The counting speed depends on the paper quality. Recommendation: If paper weighs more than 150 g/m² send us a sample pile for testing. paper counting machine ROTOMATIK model 1000T counting speed max sheets/min.* paper size min. 55 x 90 mm paper size max. 210 x 300 mm paper weight: 22 bis 255 g/m² * stack height: max. 150 mm tabbing: every 2. to sheet space requirements in mm: height 620, depth 482, width 390 height of working table: 225 mm (from the bottom of the machine) power: 230 V~, 50/60 Hz, 0.7 kw completely with all standard accessories and with small table for paper size approx. 210 x 300 mm F large table for paper size approx. 300 x 420 mm option: batch counting program F T mobile base 1000T with lockable cabinet, height adjustable, 2 rolls can be locked T Further information:

37 Counting // Tab inserting double head paper counting machine ROTOMATIK model DC-1000 counting speed max sheets/min.* paper size min. 100 x 297 mm paper size max. 800 x 1200 mm paper weight: 22 bis 255 g/m² * air float table for the above format stack height: max. 300 mm tabbing: every 2. to sheet random mode: stacks or 250 samples max. space requirements in mm: height 1400, width 1830, depth 1100 power: 230 V~, 50/60 Hz, 0.7 kw completely with all standard accessories F * The counting speed depends on the paper quality. Recommendation: If paper weighs more than 150 g/m² send us a sample pile for testing. counting device for banderoles (e.g. tax revenue stamps) small counting device for banderoles (e.g. tax revenue stamps) large counting device for banderoles (e.g. tax revenue stamps) special T T T Models ROTOMATIK can also be leased! Request your individual installments! V paper rolls green for ROTOMATIK + (ROTOMAX) also suitable for other brands 6 mm wide, approx. 60 m long external-ø 150 mm packing unit = 60 rolls T /37

38 Counting // Tab inserting various other paper counters model Max-B counting speed up to 2000 sheets/minute tab insertion from sheets throat height 15 cm table size 38 x 46 cm sheet sizes: 5,7 x 10 cm - 38 x 46 cm 220/240 V AC, 50/60 Hz model CW-1 counting speed up to 2500 sheets/minute tab insertion from sheets throat height 20 cm table size 71 x 71cm sheet sizes: 5.7 x 10 cm x 68.5 cm 220V240 V AC, 50/60Hz friction feeder model EF feeder for easy feeding of flat products paper sizes: min. 80 x 60 mm, max. 300 x 235 mm (L x W) speed / feeding performance (depending on product): 40 meter/min. / up to 60 products/min. (continuous) product passage: min. 0.1 mm, max. 5 mm paper quality: min. 80 g/m² magazine loading (depending on product): standard 200 mm drive: DC-motor control: PLC supply voltage / power input: 230 V / 50 Hz, 300 W space requirements (W x D x H): 336 x 670 x 320 mm (feeder + control + exit extension) F options: counter function: 1 99 pieces start sensor for external startingpulse possible impulse generator possible base frame: movable and vertically adjustable + / 50 mm Further information:

39 > folding sheet vibrating and jogging block gluing numbering cutting strapping... FOLDING // CUTTING // STRAPPING... 38/39

40 Folding // Cutting // Strapping... card cutting machine model KS 325 for the rotative cutting of cards paper weights from 80 to 400 gm² max. working width 325 mm standard cut: 90 x 50 mm, adjustable gauge included capacity up to 5500 card cuts per hour self-sharpening cutter wheels space requirements in mm: L 296 x W 442 x H 293 motor 230 V / 50 Hz, 0.33 kw F further adjustable gauges for card formats 85 x 55 mm, 95 x 55 mm and 3,5 x 2 (88.9 x 50.8 mm) available > Other models on request! > folding types: 2-pocket paper folding machine model FZ 345 for paper weights from 80 to 160 gm² folding speed up to sheets per hour concise folding schema at operating side paper sizes from DIN A 5 (148 x 210 mm) to DIN A 3 (297 x 420 mm) max. inlet depth in 1. pocket: 320 mm in 2. pocket: 215 mm stack height: max. 30 mm space requirement in mm: L 770 x W 445 x H 490 motor 230 V / 50 Hz. weight: 23 kg net F special device for simultaneous folding of max. 3 sheets at ones depending on the kind of folding and material thickness back stripping machine model FG for blocks from 5 to 35 mm thickness stripping length: electrical cut: 410 mm release: manually feed of the block: manually stripping material: glued and self-adhesive tape base frame of aluminium casting power: 230 V~, 50/60 Hz, 0.1 kw F Further information:

41 Folding // Cutting // Strapping... paper cutting machine model FP 65 with automatic clamp and programmable back gauge with display paper cutting machine model FP 32 with automatic clamp table top model F F NEW!!!...we have cutting guides for many models!!! > feature of both models: no matter whether the packing goods are square, rectangular, soften or hard - all parts will be strapped according to the needs - damage to the packing goods is avoided through the infinitely adjustable tape tension. automatic strapping machine model UM 30 for automatic production of banderoles for any kind of trading unit product width: mm product height: mm tape width 30 mm, for rolls of 150 m length capacity up to 25 banderoles per minute depending on the product size material of banderoles: kraft paper, PE coated and PP film transparent tiggering of cycle by push button, foot pedal or automatic by a contact when inserting material paper loop is infinitely adjustable dimensions: L 540 x W 350 x H 420 mm power: 230 V AC, 50/60 Hz, 0.25 kw special voltage on request undercarriage for the upgrade of the model UM 30 to model UM 830 F T Banderoles see price list! 40/41

42 Folding // Cutting // Strapping... rotative numbering, perforating, grooving and cutting machine model 470 Plus NEW!!! F feeds NCR chemical paper in sets up to 5 sheets (previously glued) - operation effects all sheets simultaneously in only one pass - controlled and guaranteed numbering sequence - optical double sheet detector - frontal registration system for the perfect alignment of numbers - two different inking systems - capacity of up to 20 numbering heads and up to 4 numbering lines - up to 8 finishing lines at the same time possible (perforating, micro perforating, scoring and slitting) - production programming special cleaner for numbering devices CKW-free / VbF A III cleans, protects and lubricates numbering devices in one application 1 liter-package R hand rollers with diameter 50 mm, gloss nickel-plated roller stand made out of flat steel with stilts and wooden handle roller cover 5 mm, roller base made out of aluminium and plastics this averts warping due to water absorption roller width 60 mm roller width 120 mm roller width 150 mm roller width 200 mm roller width 300 mm (with 2 grips) F F F F F block gluing presses gluing machines sheet vibrating and jogging machines measuring instruments for ph, temperature, lubrication on request on request on request on request Further information:

43 Terms General terms and conditions of supply and payment of Firma JOSEF FOELLMER GmbH, Klippeneckstraße 8, Villingen-Schwenningen Scope Our deliveries and services are provided exclusively on the basis of the terms and conditions below. The business terms and conditions of the partner, unless expressly recognised by us, are not applicable. General provisions Full details of any verbal agreements will be immediately confirmed in writing by the contracting partners. Orders will not be binding until they are confirmed by Josef Foellmer GmbH. Prices If there are no special agreements our prices are ex work excluding packaging. Our prices are in Euro, exclusive of any applicable home country tax. Payment terms All invoices are due for payment within 30 days of the invoice date. A cash discount of 2% can be deducted when the invoice is paid within ten days. Prepayment for foreign countries is standard. If the payment terms are not met, we shall be entitled to bill interest on arrears at the current interest rate due for current account overdrafts. If our partner claims supplied goods are defective, our partner is nevertheless obliged to pay. Bills of exchange and cheques will only be accepted where this has been agreed, and only on account of performance. All charges and fees concerning bills of exchange or cheques will be paid for by the partner. If it becomes apparent after conclusion of the contract that our claim to payment is at risk owing to the partner s lack of financial capacity, we shall be able to refuse performance and to set the partner a reasonable deadline within which it must make payment or provide security concurrently with delivery. If the partner refuses to do so or the deadline expires without result, we shall be entitled to withdraw from the contract and demand damages. All bank charges in and outsider Germany have to be paid by the buyer. Delivery Compliance with the delivery date or delivery period will be based on our written notifications of readiness for shipment or collection. The delivery period commences on dispatch of our order confirmation and may be extended in case of missing information or documents which have to be provided by the partner. The delivery period is met when the goods are notified as being ready for shipment or the goods already departed from the factory. The delivery period shall be extended accordingly in case of labor disputes, especially strike and lockout, or in case of unforeseen events that we are not responsible for. This is also valid if the circumstances arise with subcontractors. We are not to make responsible for the aforementioned circumstances if they occur during an existing delay. We will immediately inform the partner in writing of the beginning and end of this events. The partner is only entitled to withdraw from the contract if we are responsible for the delivery date not being met and the partner has allowed us a reasonable period of grace without result. If damage grows to the customer due to a delay that is incurred as a result of our negligence, he is entitled to demand compensation with exclusion of further claims. It amounts for each week of delay 1/2%, the maximum penalty is 5% of the value of that part of total delivery which cannot be used due to the delay in time or contract. Delivery date or period con only be met if the partner fulfils the contractual obligations. Shipment and transfer of risk The risk is transferred to the partner not later than departure of the goods from the factory or warehouse. This also applies in case of partial deliveries or special agreements, e.g. We agree to pay the forwarding charges or delivery costs. If the delivery is delayed on the partner s request the risk is transferred to the partner when the goods are notified as being ready for shipment. All shipments are insured by our shipping insurance. Therefore it is calculated a fee. The own risk is 100 Euro. The conditions of the insurance on claims must be observed. Transit insurance can be covered by the buyer and the shipping insurance may be rejected by us. Partial deliveries are permitted. Warranty For delivery defects, which include the lack of expressly warranted qualities, we are liable with exclusion of further claims in the manner that we overwork or replace all the parts free of charge, at our discretion subject to election repair or delivery replacement, that within 12 months from transfer of risk has occurred before passing of risk, particularly due to faulty design, poor materials or poor workmanship, turn out to be unusable or affected in their usability. Claims for material defects have to be expressed in writing. Replaced parts become our property For third-party products our liability is limited to the claims we have towards our supplier. Any material defects in respect of any defect deriving from unsuitable or improper use, defective assembly or operation by the partner or third parties, normal wear and tear, defective or negligent handling, improper storage will be excluded. Consequences of unsuitable modifications or repairs undertaken by the partner or third parties without our approval will be excluded. If we fail to improve or replace the defect material or goods, or fail to do so within a reasonable time in accordance with the terms of the contract, the partner may set in writing a final deadline within which we must fulfil our obligations. In the event of this period expiring witout result, the partner may withdraw from the contract. Any additional or more extensive claims by the partner against us are excluded. This shall apply in particular to cl aims for indirect damages not deriving from the delivered goods themselves. Charges for dismounting/installation and transportation are not at the expense of our company. Reservation of title We reserve the right of ownership in respect of the goods supplied until such time as all claims under the business relationship with the partner have been met. In the event of breaches of its duties by the partner, in particular in the case of delayed payment, we shall be entitled, after a reasonable period of grace allowed to the partner for performance has elapsed without result, the partner shall return on our request the goods to us at his expense. The partner shall be obliged to surrender the goods. The withdrawal as well as the garnishment of goods doesn t include a resignation of the contract except if we confirm specifically to a resignation in writing. In case of garnishment or interferences with third parties we have to be notified in writing immediately. The partner is entitiled to sell these goods in the regular course of business, provided he meets his obligations arising from the business relationship with us in proper form. Nevertheless, he assigns all claims to us which arise from resale to his customer or third parties no matter if the conditional sold goods are resold before or after processing. The partner is still authorized to addert these claims ofter the assignment. Our authorization to assert these claims remain unaffected. We commit ourselves not to assert these claims if our partner meets his payment obligation duly. We are allowed to request from the partner to disclose his assigned claims and their liable parties, all information needed for the collection, delivers all appendant documents and notfies his liable parties of the assignment. If our products are combined with other goods not belonging to us for resale the claim of the partner to the buyer is asigned to us with the value of the agreed delivery price. If the value of the existing securities exceeds the secured claims in total by more than 20%, we undertake, at the partner s request, to release securities of our choice in this respect. Liability The limitations of liability indicated above do not apply in the case of specific intent, gross negligence on the part of our legal representatives or senior employees, and in the event of knowing violation of significant contractual obligations. Other claims The partner may withdraw from the contract when we are not able to fulfil our contractual obligations before the transfer of risk. If the non-delivery occurs due to default of acceptance or due to faults on the partner s part, our partner is nevertheless obliged to pay. Any additional or more extensive claims by the partner against us are excluded. Changes to or cancellation of the contract or reduction of price as well as replacement of damages, especially indirect damages not deriving from the delivered goods themselves, are excluded. Place of performance Unless otherwise indicated in the order confirmation, the place of performance is our principal place of business. The place of jurisdiction for all legal disputes, including any action relating to payment bills of exchange or cheques, is our principal place of business. We are also entitled to bring an action at the place of business of the partner. The contractual relationship is exclusively subject to the laws of the Federal Republick of Germany. registered HRB 880 Villingen-Schwenningen VAT-no.: DE Tax-no.: jurisdiction: Villingen-Schwenningen managing directors: Michael Foellmer Werner Foellmer 44/45

44 How to find Josef Foellmer GmbH: For the enhancement of paper! JOSEF FOELLMER GmbH Klippeneckstraße 8 D Villingen-Schwenningen phone (+49) (0) / fax (+49) (0) / foellmer@foellmer.com All our machines are made in accordance with CE-standards!