Product information Modular standard ABSKG unit

Transcription

1 Modular standard SKG unit Description asic unit ype SKG Modular standard unit SKG type Motor voltage V Motor frequency Hz Nominal speed rpm ump design External geared pump Nominal size 5 Displacement 5 cm³ umped flow 7.1 l/min Max. operating pressure 185 ermissible operating pressure 185 bar Operating pressure 185 Operating pressure 185 bar Maximum set pressure of 200 Maximum set pressure of pressure relief valve 200 bar pressure relief valve Drive power kw Container size liters Oil-air cooler Control variant 1 ressure control unit in accordance with Options and accessories Filter contamination display 1 Visual Level/temperature switch hermostat Hand pump Oil leakage pan/feet Labeling 1 Coloring 0 Standard (cover with galvanic coating in accordance with DIN 50979) 1 / 5

2 Modular standard SKG unit echnical data Container capacity 40 l ipe ports Connecting thread in accordance with ISO 1179 (DIN shape X) or pipe connections in accordance with ISO 8434 part 1 Hydraulic fluid HL mineral oil in accordance with DIN part 2, ISO VG 46 lease pay attention to our regulations in accordance with Data Sheet RD 07075! reather filter filtration grade 10 µm Return filter filtration grade 10 µm Viscosity range 12 to 800 mm²/s (recommended range: 20 to 100) Maximum permitted degree of contaminationurity classes according to ISO 4406 (c) in accordance with of pressure fluid the requirements for the hydraulic overall system he purity classes specified for the components must be complied with in hydraulic systems. Effective filtration prevents faults and also increases the service life of components. For information on selecting filters, see Data Sheet RD Electric motor current type hree-phase alternating current Electric motor voltage 230/400 V 50 Hz or 400/690 V 50 Hz according to IEC Electric motor number of pins 4 Electric motor degree of protection I55 ype of piping wo-edge cutting ring in accordance with ISO 8434 part 1 (DIN 2353); light/heavy series or tube shaping system in accordance with Surface treatment of cover Galvanic coating in accordance with DIN Surface treatment of tubes Fe/Zn8/-Cr6 free Surface treatment of components Delivery condition - without additional surface treatment Surface treatment of container surface treatment 2 / 5

3 Modular standard SKG unit Note: he units planned with this configurator do not constitute a complete machine as defined by the EC Machinery Directive 2006/42/EC. he hydraulic unit is manufactured according to generally accepted technological requirements. Installation of the hydraulic unit in the manufacturer's machine presents additional possible risks due to interactions between the hydraulic unit and the overall machine. his particularly applies for the effect of hydraulic and electrical controls on hydraulic drives which generate mechanical movements. herefore, the manufacturer of the overall machines must have carried out an independent risk assessment. On this basis, he must also have created operating instructions for the overall machine. he product may only be put into operation if it is installed in the machine or system for which it is designed and it fully meets the requirements of the EC Machinery Directive. When installing and commissioning, it is essential to adhere to the "General operating instructions for hydraulic units and hydraulic assemblies" RD /09.09! ttention: the project planning and commissioning must only be carried out by qualified, trained personnel with specialist knowledge of hydraulics. 3 / 5

4 GGREGGRENZE bar 0.51 DN10 osch Rexroth G. lle Rechte vorbehalten, auch bzgl. jeder Verfuegung, Verwertung, Reproduktion, earbeitung, Weitergabe sowie für den Fall von Schutzrechtsanmeldungen NG bar C C D D 0.14 NG0 -M* NG63 10 µm 0.33 G100L osch Rexroth G. ll rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. E F NG5 S Für diese Zeichnung besteht Haftungsausschluss, da sie automatisch erstellt wurde. For this drawing non-warranty exists, because it was created automatically Q = 7.1 l/min p = 185 bar = 3.00 kw 0.10 n = /min NG40 10 µm Ind. Change/end. YYYYMMDD Drawn/Gez. Checked/Gepr. Releas./Freig. WN Resp. dept./verantw. bt. dd. info./zus. Info. Lang./Spr. Wght./Gew. Sheet/l. 1/ Crit.. Scale/M.stab Mat. meets/stoffe s. Syst. Doc. type.. MNR see above/siehe oben ZN C Repl. for Repl. by D/D Ind. Format 3 E F

5 Modular standard SKG unit Component list 0.10 R ZR- 40/09-1 /M 1 Unit R OIL-LEVEL GUGE 31-21/127 1 Unit R IR FILER FEF 0 10-F00 1 Unit RD R EN0063-H10XL00-V2,2-M-R3-R110 1 Unit RD R918C00201 ZF RC20M 1 Unit 0.32 R COULING KD 24-17/28X Unit R MO-EC-E L-4-5C-3-3-HOY 1 Unit ZN R C R 80CS4H/ 250/116-1X/DH-L 1 Unit R RESSURE CRL UNI 42-15/10-200SM1 1 Unit / 5