STIH) Technical Information STIHL Cutquik cut-off machine TS 410, 420 Series Starter cover with rewind starter
|
|
- Rodney Higgins
- 5 years ago
- Views:
Transcription
1 STIH) Technical Information STIHL Cutquik cut-off machine TS 40, 420 Series 4238 Contents. Starter cover with rewind starter 2. Summary. Starter cover with rewind starter In order to improve durability, a new "starter cover with rewind starter" is being introduced in two stages:. st stage new "starter cover with rewind starter" with new, more durable starter rope, rewind spring and starter pawl.. 2nd stage new "starter cover with rewind starter" with optimized starter cover, 4224 (TS 700, TS 800) rewind spring, new rope rotor, plus new starter rope and starter pawl carried over from stage.. New "starter cover with rewind starter" In the initial stage, the previous "starter cover with rewind starter" will be replaced by the new version The new "starter cover with rewind starter" can also be used for older machines. The previous "starter cover with rewind starter" is no longer available. englisch / English
2 Page 2 Technical Information Starter rope, starter grip Service notes. Cut the new "starter rope Ø 4 mm x 995 mm (39")" to length with a hot blade or melt the ends of the rope after cutting this prevents the new "starter rope Ø 4 mm x 995 mm (39")" from unraveling A 5 370TI039 KN In the new "starter cover with rewind starter" , the previous "ElastoStart grip Ø4.5mm () with the previous "starter rope Ø 4.5 mm (2) will be replaced by the new "grip with starter rope" (3, 4) The new "grip with starter rope" (3, 4) contains, the grip (3) , and a new more durable "starter rope Ø 4 mm x 995 mm (39")" (4). The new "starter rope Ø 4 mm x 995 mm (39")" (4) is not available individually and must be cut to a length of 995 mm (39") from the new bulk stock "starter rope Ø 4 mm x 30 m (00')" , which replaces the version "starter rope Ø 4.5 mm / 28 pieces" The knots in the new "starter rope Ø 4 mm x 995 mm (39")" should be made with the special knots shown, both on the end with the new grip as well as on the end with the rope rotor in doing so, observe the protruding length of rope A (4 to 8 mm) (." to.3"). 370TI040 KN
3 Technical Information Page 3..2 Rewind spring, pawl TI044 KN 5. On the end with the rope rotor, insert the special knot into the knot pocket so the end of the rope () faces upward and is flush with the outermost edge (arrows) of the knot pocket this eliminates contact between the rope and the pawl spring The new "grip with starter rope" may also be used for older machines with previous "ElastoStart grip Ø 4,5 mm" The previous "ElastoStart grip Ø 4.5 mm" remains available. The previous versions of the "starter rope Ø 4.5 mm" and the "starter rope Ø 4.5 mm / 28 pieces" remain available for machines with the previous "ElastoStart grip Ø 4.5 mm" Additionally, in the new "starter cover with rewind starter" , the previous versions of the rewind spring and the pawl are being replaced by the new versions of the rewind spring (5) and the pawl (6) The new pawl (6) has a steel pin. The new versions of the rewind spring (5) and the pawl (6) can also be used for machines with the previous "starter cover with rewind starter" The previous versions of the rewind spring and the pawl remain available for other series. 370TI039 KN
4 Page 4 Technical Information New "starter cover with rewind starter" In the second stage, the "starter cover with rewind starter" introduced in the first stage will be replaced by the new version Starter cover 2 The new "starter cover with rewind starter" can also be used for older machines. The "starter cover with rewind starter" introduced in the first stage will remain available until availability of the new "starter cover with rewind starter" Screw-mounted rewind spring In the new "starter cover with rewind starter" , the previous rewind spring () is replaced by the new, screwmounted version (2) The new rewind spring (2) is mounted with new "screws P3x (3) (2 pieces) on the new starter cover (4) (see Section b.2.2). 370TI04 KN Left: Previous starter cover Right: New starter cover Additionally, in the new "starter cover with rewind starter" , the previous starter cover () is replaced by the new version (2) The new starter cover (2) can be recognized by the holes for screw-mounting of the new rewind spring (see Section b.2.). Service notes / spare parts The new starter cover (2) may only be installed in machines with the new "starter cover with rewind starter The previous starter cover () remains available for machines with the previous versions of the "starter cover with rewind starter" and TI042 KN The new rewind spring (2) may only be installed in machines with the new "starter cover with rewind starter The previous rewind spring () remains available for machines with the previous versions of the "starter cover with rewind starter" and
5 Technical Information Page Rope rotor 2 370TI043 KN Left: Previous rope rotor Right: New rope rotor Additionally, in the new "starter cover with rewind starter" , the previous rope rotor () is replaced by the new version (2) The geometry (arrows) of the new rope rotor (2) has been optimized for the new versions of the rewind spring (see Section b.2.) and the starter cover (see Section b.2.2). Service notes / spare parts The new rope rotor (2) may only be installed in machines with the new "starter cover with rewind starter When carrying out repairs to the rope rotor, encapsulate the hub of the rope rotor and the pawl bearing with lubricant The previous rope rotor () remains available for machines with the previous versions of the "starter cover with rewind starter" and
6 Page 6 Technical Information Summary Item Part Name Previous New Rem. Starter cover with rewind starter, st stage Starter cover with rewind starter; ) including Items 3, 4, 5, 8; 2 Starter cover with rewind starter; ) 7) including Items 3, 4, 6, 7, 9; 3 Rewind spring ) 3) 4 Pawl ) 3) 5 ElastoStart grip Ø 4.5 mm; ) including Item 8 6 Grip with starter rope; ) 5) including Items 7, 9 7 Starter grip ) 8 Starter rope Ø 4.5 mm ) 9 Starter rope Ø 4 mm x 995 mm (39") * - 5) 6) 0 Starter rope Ø 4.5 mm / 28 pieces ) Starter rope Ø 4 mm x 30 m (00') ) Starter cover with rewind starter, 2nd stage 2 Starter cover with rewind starter; ) including Items 4, 5, 6; 3 Starter cover with rewind starter; ) including Items 4, 5, 6, 7; 4 Starter cover ) 5 Rewind spring ) 6 Rope rotor ) 7 Screw P3x6 (2x) Modification to be introduced : continuously Remarks ) Previous version of part no longer available from factory 2) New version of part can also be used for older machines 3) Previous version of part remains available for other models 4) Previous version of part remains available for older machines 5) See "Service notes" 6) Part is not available individually cut to length (must be cut to length from bulk stock ) 7) Part remains available from the factory until availability of the new "Starter cover with rewind starter" ANDREAS STIHL AG & Co. KG, 2009 Technical Documentation D/MTK-fr
MVSI-TS. Technical features
Technical features Power supply Three-phase voltage from 48V to 690V, 50Hz or 60Hz; suitable for use with an inverter from 20Hz to the base frequency, with constant torque load profile. Polarity 4, 6 and
More informationPulse Counters, electromechanical
Mini Counters W 5 / AW 5 5-digit miniature pulse counter, adding with manual reset Power consumption min. 30 mw Suitable for battery and electronic switching operations Long operating life (50 Mio. pulses)
More informationIndex. Index. 1.0 Introduction...2 This Manual Operation Finger Lift Cable Lift Pneumatic Operation...
Li nearenc oder s wi t httlout put Us ermanual Index 1.0 Introduction..........................2 This Manual...........................2 2.0 Safety Summary......................3 Terms in this Manual....................3
More informationwww.mete-enerji.com.tr INDUSTIAL IEC PLUGS AND SOCKETS INDUSTIAL IEC PLUGS AND SOCKETS Position of the Earthing Contact acc. to IEC 60309-2 225/400-265/460 V~ 60 Hz (1) 3 P+N+ 3 P+ 2 P+ 120/208-144/250V~
More information120cm (4x36 Watt) incl. Splitter Instruction Manual
120cm incl. Splitter Instruction Manual Table of contents 1 Description of Device and Functions... 3 1.1 Safety Instructions... 4 2 Preparation and Installation... 5 2.1 Mounting... 5 2.2 Secure the...
More informationContent. The brand walimex pro 4. Aptaris Universal XL 10. Aptaris Blackmagic Cinema 12. Aptaris Blackmagic Pocket 13.
Aptaris Professional Cage & Rig System 2014 / 2015 2 Content The brand walimex pro 4 Premium quality Made in Germany 6 Aptaris : From cage to rig with just one system 8 Aptaris Universal XL 10 Aptaris
More informationART2000i Digital Dimming System. Installation guide. Stock number *8200-
ART2000i Digital Dimming System Installation guide Stock number 8200-0159 *8200- 0159* Useful Avolites phone numbers:- Avolites England Sales and service* (+44) (0) 20 8965 8522 Service out of hours* (+44)
More informationBookcheck Model 966. Site Planning Guide
Bookcheck Model 966 Site Planning Guide 3M Library Systems 3M Center, Building 225-4N-14 St. Paul, Minnesota 55144-1000 Copyright 2002, 3M IPC. All rights reserved. www.3m.com/library 060-A 78-8123-7852-5,
More informationRELIABLE LED-LIT DLP REAR-PROJECTION CUBES PERFECT VISUAL SOLUTIONS
RELIABLE LED-LIT DLP REAR-PROJECTION CUBES PERFECT VISUAL SOLUTIONS OUR eccube SERIES DEVELOPED FOR DEMANDING APPLICATIONS: SOLUTIONS FOR CONTROL SOLUTIONS FOR PRESENTATION & INFORMATION SOLUTIONS FOR
More informationINSTALLATION MANUAL. ION Series FIBER OPTIC ILLUMINATOR IP67 OUTDOOR RATED
ION Series FIBER OPTIC ILLUMINATOR IP67 OUTDOOR RATED ION-8000-WW (Warm White) ION-8000-CW (Cool White) ION-8000-B (Blue) ION-8000 RGB ION-8000 RGBW ION-8000 WW-CW Class 2 E359853 10.08.2014 FIBER HEAD
More informationDevices. Signal reception socket outlets - TECHNICAL CHARACTERISTICS C - Pouyet C - IBM, Reichle & De Massari
Devices Signal reception socket outlets - TECHNICAL CHARACTERISTICS 16357.C - Pouyet 16365.C - IBM, Reichle & De Massari Pouyet IBM Reichle & De Massari 16364.C - Panduit RJ45 schermata RCA Tipo F OPTI-JACK
More informationRCA3 SOLENOID PILOT VALVES PENTAIR CLEAN AIR SYSTEMS
RCA3 SOLENOID S PENTAIR CLEAN AIR SYSTEMS GOYEN RCA3D REMOTE PILOT Remote solenoid pilot valve to control the actuation of dust collector diaphragm valves. RCA3D with flying lead connection INSTALLATION
More informationThe Zehnder LST brings a safe, attractive heating solution to applications where hot radiant surfaces are undesirable.
zehnder LST The Zehnder LST brings a safe, attractive heating solution to applications where hot radiant surfaces are undesirable. The high quality, robust casing and slim lines ensure the Zehnder LST
More informationAssembly Instructions
Assembly Instructions REP Series Environmentally - Sealed Rectangular Plastic Connectors Hypertac S.A. January 2014 Assembly Instructions REP Series January 2014 1 Table of Contents I. Introduction A.
More informationStep 1. 2x Kep Nut 1x Left Motor Assembly
Start with the build completed in Lesson 3 of the TETRIX Getting Started Guide. Steps 1 to 3 involve removing elements from the model. These elements will be reattached later. Parts to be Removed Step
More information98027-Body Posts 98037-Receiver Mount 98038-Battery Holder 98039-Battery Mount 98090-Adjustable Linkage (not include Extra Longer version ) 98091-Center Linkage 140*6.0mm(94880 /T2 T3 T6) 97002-Center
More informationCN Remove the scanner assembly (X476 and X576 models) and all doors/covers.
CN598-67045 www.hp.com/support IMPORTANT: Ensure the product firmware is upgraded to at least version 1336MR before performing this repair procedure. If the firmware upgrade cannot be completed, contact
More informationCABLE CARRIER MADE OF NYLON EASY CABLE INSTALLATION VERY LONG SERVICE LIFE FOR OFFICE FURNITURE AND INTERIORS
CABLE CARRIER MADE OF NYLON EASY CABLE INSTALLATION VERY LONG SERVICE LIFE FOR OFFICE FURNITURE AND INTERIORS TSUBAKI KABELSCHLEPP PROTUM OFFICE P 0240 GS Outer height 23 mm Inner height 10 mm Outer width
More informationPC-250. SMD Taped Parts Counter Operator s Manual. ISO 9001:2008 Certified. V-TEK, Incorporated 751 Summit Avenue Mankato, MN USA
PC-250 SMD Taped Parts Counter Operator s Manual ISO 9001:2008 Certified V-TEK, Incorporated 751 Summit Avenue Mankato, MN 56001 USA (P) 507-387-2039 (F) 507-387-2257 www.vtekusa.com Dear Customer: All
More informationInstallation Manual IPT Installation of skillet systems with 125 A track current. MV a-E.
www.wampfler.com Page 1 of 27 Index Page 1 Basics...4 2 Basic understanding of an IPT -system...5 3 General rules regarding metal parts in close proximity...6 3.1 Envelope free of ferromagnetic material...6
More informationLed Dynamic DMX Tri Curtain Manual
Led Dynamic DMX Tri Curtain Manual Welcome to use the LED dynamic DMX Tri curtain, please read following Safety Notes as well as those in User Manual carefully before connection, installing, operation
More informationQC Electromagnetic Overhead Crane Specifications
YUANTAI CRANE QC Electromagnetic Overhead Crane Specifications Compact structure, new style, beautiful outlooking Good in usability with long service life Bearing high capacity, high working class Flexible
More informationAccess Control Keypad for MK-DV, JB-DV
#91173 0406 Access Control Keypad for MK-DV, JB-DV - INSTRUCTIONS - The KVI is a surface mount electronic access control keypad for use with Aiphone s MK-DV or JB-DV video door station. Designed with the
More informationNational Wire and Cable and National Cable Molding Headquarters Los Angeles California
National Wire and Cable and National Cable Molding Headquarters Los Angeles California CAPABILITIES Medical Business Machines Communications Equipment Computer Equipment Audio Systems General Instrumentation
More informationCOMPONENTS & COMPONENTS & ACCESSORIES
COMPONENTS & Accessories 135-145 135 COMPONENTS & ACCESSORIES REMOTE CONTROL 137-138 SOAP DISPENSERS 138 MIXING VALVES 139 SOLENOID KEY 140 REMOTE CONTROLS PERFECT TIME CONTROL ASSEMBLY 140 COVER PLATE
More information3M 710 Splicing System. Modular. Solutions. for Copper Splicing
3M 710 Splicing System Modular Solutions for Copper Splicing A History of Strong Copper Networks The reliability of a copper conductor communication system depends greatly upon the reliability of the individual
More informationTip: Faller Mittelstadt Apartments with Controlled LED Lighting Date: , Addition
Hi All, I have had the 130926 Mittelstadt apartments shown below on my layout for a long time and thought it was about time to add LED lighting to the buildings. With my success at upgrading the Faller
More informationHANNAY REELS. Audio/Video Reels. For use in: Production & Recording Facilities Television & Radio Stations
udio/video Reels NNY RLS or use in: Production & Recording acilities Television & Radio Stations Mobile roadcast Units Satellite & able ompanies Live vents & oncerts -9703-/V Rev. 3 Series V/VX udio/video
More informationAdvanced Digital Melting Point Apparatus
Advanced Digital Melting Point Apparatus User Guide Version 1.1 Figure 1: Front view Sample heating block Power on/off (at rear) Printer output (at rear) LCD screen Viewer Capillary storage Control panel
More informationGLAST Large Area Telescope:
GLAST Large Area Telescope: Gamma-ray Large Area Space Telescope Tracker Subsystem WBS 4.1.4 Tracker EM Vibration Test Status Engineering Meeting December 2, 2003 Robert Johnson Santa Cruz Institute for
More informationAluminum spun system one piece reflector Parabolik Prime Focus AZ/EL or Polar Mount Easy Installation
C Band & KU Band LS 5000 5 Meter Satellite Earth Station Antennas Aluminum spun system one piece reflector Parabolik Prime Focus AZ/EL or Polar Mount Easy Installation Electronic Performance Specifications
More information12A-969D190 LC-215 (1997) Page 1 of 12 Cables And Pivot Shaft
12A-969D190 LC-215 (1997) Page 1 of 12 Cables And Pivot Shaft 12A-969D190 LC-215 (1997) Page 2 of 12 Cables And Pivot Shaft 1 746-0939 1 S 6 Spd. Cable Code: N Notates a new part (not 2 656-0613 1 S Pulley
More informationLTC 113x & LTC123x FlexiDome Series Fixed Dome Cameras
LTC 113x & LTC123x FlexiDome Series Fixed Dome Cameras Eng Installation Instructions F D E NL I IMPORTANT SAFEGUARDS 1. Read Instructions All the safety and operating instructions should be read before
More informationB2590/50SNZ Crank Up Installation & operating instructions
B2590/50SNZ Crank Up Installation & operating instructions New Zealand contact: Phone: +64 (07) 846 7771 Email: sales@rvsupplies.co.nz Web: www.rvsupplies.co.nz Maxview reserve the right to change specifications
More informationIP65 IK08. Professional linear lighting system for direct and indirect lighting for indoor and outdoor applications W A R R A N T Y
N A N O Professional linear lighting system for direct and indirect lighting for indoor and outdoor applications Applications: Setting: Installation: Material: Finishes: LED Light source: Optics: Functions:
More informationDigital Modulator Instructions
Product Code: CCT818 ANTIhum.com Digital Modulator Instructions Features Tunable output channel from 21-69, Push button channel selection, Microprocessor tuning, Channel Memory, Audio input, LED channel
More informationRapid-Air. Operating Instructions. C-T-L w/ 100D Series Servo Feed Control Ver. C. s/n & Later
Rapid-Air Operating Instructions C-T-L w/ 100D Series Servo Feed Control Ver. C s/n 133095 & Later 4601 Kishwaukee Street, Rockford, IL 61109 815.397.2578 www.rapidair.com Thank you for purchasing a Rapid-Air
More informationUSER MANUAL. GOLDMUND LOGOS 1N-2N SPEAKER SYSTEM Active Speaker
USER MANUAL GOLDMUND LOGOS 1N-2N SPEAKER SYSTEM Active Speaker Thank you for purchasing the Goldmund LOGOS 1N-2N SPEAKER SYSTEM The Goldmund Logos line fully incorporates the technological expertise developed
More informationDIY. How to install a PL-259 connector. Parts list: Tools list: Worthwhile projects you can build on your own
DIY Worthwhile projects you can build on your own Just like you, I often need to install a PL-259 connector on a length of coax (coaxial cable), to attach it to the mating SO-239 connector of a mobile
More informationDocumentation. Magnetic Encoder System (MES) Version: Date:
Documentation Magnetic Encoder System (MES) Version: Date: 1.1 2016-02-26 Table of content Table of content 1 Foreword... 4 1.1 Notes on the documentation... 4 1.2 Intended use... 5 1.3 Documentation
More informationProduct information. Front-door station series with video for surface-mount
Product information Front-door station series with video for surface-mount series VPES series VPDS 2 05/2006 Table of contents Scope of delivery...3 Safety notices...3 General notes on the cabling in TCS
More informationConvincing technology - faster mounting
Aerials Dishes Receivers Headends Multi switches Amplifiers Outlets Home accessories Fibre cabinets Enclosures Convincing technology - faster mounting New antenna outlet socket generation 1 TRIAX - your
More informationAC diagonal module Ø 200 mm
max. 850 m /h C diagonal module Ø 00 mm Material: Housing: Plastic P Support bracket: Plastic P Impeller: Plastic P Rotor: Coated in black Number of blades: 7 Direction of air flow: "V" Direction of rotation:
More informationEverything under control
FLYER UK 3-2018 01.07.2018 30.09.2018 WELDING TABLES AND CLAMPING SYSTEMS Everything under control THE SIEGMUND TABLE REDEFINED SUB TABLE BOX YOUR TOOLS ALWAYS AT HAND Create storage space under your welding
More informationUltra-Grip Crimp Connector Hand Tool Kit for Coaxial Cable and Powerpole Connectors
Ultra-Grip Crimp Connector Hand Tool Kit for Coaxial Cable and Powerpole Connectors DXE-UT-KIT-CRIMP DXE-UT-KIT-CRIMP-INS-Revision 2b DX Engineering 2014 1200 Southeast Ave - Tallmadge, OH 44278 USA Phone:
More informationE4200 Antenna Installation Instructions: 1. Soldering required (here is the list of tools you will need)
Thank you for purchasing the 6 Antenna Mod Kit for your Linksys router. First we will show you how to install the antennas for your router. Next we will teach you how to setup the DD-WRT firmware which
More informationNC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM
NC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM Content 1. General 5 2. The products of NC-1000 system 6 3. Mounting of the frame 8 4. Earthing of the frame 8 NC-1000 FIBRE OPTIC
More informationPATCH PANEL Easy Patch INSTRUCTION MANUAL
Page 1 BDA82-0 PATCH PANEL Easy Patch 96 Bantam (TT) Jacks 50 pin D-subminiature NPPA-TT-SD50 Easy Patch NPPA-TT-SD50 Page 2 BDA82-0 Index page 1 Electrical configuration 3 2 Re-Configuration and Replacement
More informationOPERATION NOTES FOR PSIDEX AUDIO PGP-1A PRE-AMPLIFIER DESCRIPTION INSTALLATION
OPERATION NOTES FOR PSIDEX AUDIO PGP-1A PRE-AMPLIFIER DESCRIPTION The Psidex Audio Laboratory PGP- 1A is a vacuum tube based microphone preamp and program line amplifier designed to provide solid, robust
More informationBT Series of Battery-Hydraulic Hand Tool Kits
BT Series of Battery-Hydraulic Hand Tool Kits Fast Facts More than a ton of power in your hand. (BT 3500) Highly Portable Lightweight Ergonomic Compatible with SDE dies and numerous heads 9 different heads/adapters
More informationSupport Frame STB Assembly and Operating Instructions
Support Frame STB Assembly and Operating Instructions Fig. 2.1 Support frame STB 450 Fig. 2.2 Support frame STB 300 Fig. 2.3 Brace bracket SK 150 Product features The support frames are mainly used for
More informationECS COMBINED CUT-OUT AND CT CHAMBER INSTALLATION
Document Number: ECS 13-0080 Network(s): Summary: ENGINEERING CONSTRUCTION STANDARD ECS 13-0080 COMBINED CUT-OUT AND CT CHAMBER INSTALLATION EPN, LPN, SPN This standard details the procedure for installing
More information19 / 20.1 / 22 WIDE SCREEN TFT-LCD MONITOR
19 / 20.1 / 22 WIDE SCREEN TFT-LCD MONITOR V193/ V220 Series V202 Series USER MANUAL www.viewera.com Rev. 2.0 Table of Contents EMC Compliance......1 Important Precautions...2 1. Package contents....3
More informationAccessories for GF and RA machines
Accessories for GF and RA machines A BRAND OF ITW ORBITAL CUTTING & WELDING 21 Orbital cutting & beveling machines for high-purity process piping Accessories for GF and RA machines Saw blade lubricant
More informationPendant Light Fittings Series 6050
> Saltwaterresistant enclosure, aluminium alloy, optionally with painting > Maintenancefree operation and long service life with induction lamp or LED > Mounting with ring bolts or tiltable mounting bracket
More informationActemium NDS Nürnberg. A system for the nondestructive inspection of forgings for wind energy components
Actemium NDS Nürnberg A system for the nondestructive inspection of forgings for wind energy components Dr. Christian Buschmann Klaus Leupoldt, Heinz-Josef Otte Dirostahl, Remscheid Actemium NDS Nürnberg
More informationEndurance Robotics PT-3
Endurance Robotics PT-3 The Endurance Robotics Pan and Tilt PT-3 base is a rugged pan and tilt system based around standard sized hobby servos. Featuring all around rigid 1/4" ABS laser cut construction,
More informationUSER S Manual NGLT104WPD NGLT150WPD LCD TV / Monitor (IP67 Grade)
USER S Manual NGLT104WPD NGLT150WPD LCD TV / Monitor (IP67 Grade) This Manual is revisable without further notice Contents CONTENTS ------------------------------------------------------------------- 1
More informationThe AMS 5ICT LS is a full bandwidth 200-Watt high sensitivity loudspeaker that utilises our all-new proprietary 5" ICT (Inductive Coupling
Full range surface-mount loudspeaker for indoor and outdoor installation applications 5 Watts continuous, 2 Watts peak power 5" ICT (Inductive Coupling Technology) point source driver for extended frequency
More informationBulletin 190 Compact. Combination Starters
0Circuit reaker ulletin 10 ulletin 10 Compact Combination Starters Power Range 0.1...45 ulletin 10E Modular Eco Starters ulletin 10S Pre-wired Compact Starters Uses ulletin 140M Motor Protectors and ulletin
More informationAssembly Instructions Clearlight Infrared Sauna: CE-C
1 2 Assembly Instructions Clearlight Infrared Sauna: CE-C Part List...4 Pre-Assembly Instructions...5 Assembly Instructions...6-8 Control Panel Instructions...9 Color Light Therapy Instructions...10 Using
More informationOptical Distribution Box 300 Installation Guide. Version : R0.0
Optical Distribution Box 300 Installation Guide Document No. : OD16-546-L-01 Version : R0.0 Date: 21-Mar-2018 IMPORTANT INSTRUCTIONS When using fiber optic equipment, basic precautions should always be
More informationISRA VISION PARSYTEC Tissue World Milano 2017
1 Improve runability in production & converting by Tissue Inspection System and Web Break Monitoring System TISSUE 2 Total Machine Efficiency Improvement (TME) Reducing defects on the tissue machine with
More informationB2590/65SNZ. Crank-Up. Installation & Operation Instruction Manual NZ Iss 1
B2590/65SNZ Crank-Up Installation & Operation Instruction Manual 9111410NZ Iss 1 Useful Information Date of Purchase Retailer Installer Serial Number Contents Warranty P3 Safety Precautions P4 Introduction
More informationRevision 1.0 Parts List Salvador 1~, 3~
Revision.0 www.grindex.com Parts List 809.8 Salvador ~, 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 The data plate...3 Parts... 4 Exploded
More informationthe brochure of lights deck and patio in-lite
the brochure of lights deck and patio in-lite Without light, we would never know what beauty hides in the darkness What the eye cannot see it cannot appreciate. in-lite Design Corporation make light an
More informationTHE AMBER COMPUTER VDU PROJECT.
THE AMBER COMPUTER VDU PROJECT. H. Holden. April. 2019. BACKGROUND: Of the vintage small cathode ray tube VDU s or video monitors, the one that has impressed me the most, is the one manufactured by Zenith
More informationThe Two Assemblies. Standard Assembly For signs up to 11" wide. Pull flexible lens directly outward with Sucton Cup Tool for lens removal
System Overview The Two Assemblies The Arris system is comprised of two unique assemblies, each designed to provide maximum cost effectiveness and design flexibility for specific types of signs. With both
More informationSupport Frame STB Technical Instruction Manual
Support Frame STB Technical Instruction Manual Fig. 2.1: Support frame STB 450 Fig. 2.2: Support frame STB 300 Fig. 2.3: Brace bracket SK 150 Product Characteristics The support frames are mainly used
More informationJUMO extherm-at Type , explosion-proof surface-mounted thermostat for zones 1, 2, 21, and 22
Data Sheet 605055 Page 1/8 Type 605055, explosion-proof surface-mounted thermostat for zones 1, 2, 21, and 22 Special features Single thermostat with capillary or rigid thermowell and double thermostat
More informationTeltron Delection Tube D
Teltron Delection Tube D 1011119 Overview The electron-beam deflection tube is intended for investigating the deflection of electron beams in electrical and magnetic fields. It can be used to estimate
More informationOWNERS MANUAL. Revision /29/ Lightronics Inc. 509 Central Drive Virginia Beach, VA Tel
OWNERS MANUAL Revision 1.87 01/29/2006 Page 2 of 17 TABLE OF CONTENTS AR-1202 UNIT DESCRIPTION 3 EXTERNAL CONTROLS 3 POWER REQUIREMENTS 3 INSTALLATION 3 Physical Location 3 Power Input Connections 3 Three
More informationPeak Atlas IT. RJ45 Network Cable Analyser Model UTP05. Designed and manufactured with pride in the UK. User Guide
GB05-7 Peak Atlas IT RJ45 Network Cable Analyser Model UTP05 Designed and manufactured with pride in the UK User Guide Peak Electronic Design Limited 2001/2013 In the interests of development, information
More informationDLMP-45/45R Installation Instructions
DLMP-45/45R Installation Instructions Tools Needed Posidrive No.3 Screwdriver Large Flat Head Screwdriver 2x 10mm Spanner 1x 13mm Spanner Ø8mm Drill Ø6mm Drill Kit Contents [ ] 1x Tube 2.5M long 17420
More informationdrylin SD - Spindle Drives NEW 2013 dryspin technology
drylin SD - Spindle Drives NEW 2013 dryspin technology Sales drylin SD subsidaries germany total 2009 2010 2011 2012 2013 Jan-Sep Product range Wide product range 9 materials for nuts Trapezoidal High
More informationTAL TAL TAL 049
TL 046 - TL 047 - TL 049 80 to 000 kv - 50 Hz / 225 to 250 kv - 60 Hz lectrical and mechanical data TL 046 - TL 047 - TL 049 dapted to needs The TL alternator range is designed to meet the specific needs
More informationMODEL PA II-R (1995-MSRP $549.00)
F O R T H E L O V E O F M U S I C MODEL PA II-R (1995-MSRP $549.00) OWNER'S MANUAL AND INSTALLATION GUIDE INTRODUCTION To aid in the exciting and custom installs which installers are performing all over
More informationKramer Electronics, Ltd. USER MANUAL. Model: RTBUS-11. Round Table Connection Bus
Kramer Electronics, Ltd. USER MANUAL Model: RTBUS-11 Round Table Connection Bus Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 2 3 Overview 3 3.1 About HDMI 4 4 Your RTBUS-11 Round
More informationPulp and Paper Screens
Pulp and Paper Screens A brand of Aqseptence Group Global Footprint Johnson Screens has been engineering and manufacturing screens since 1904 and has a storied history of innovation and problem solving
More informationElectric Motorized Projection Screen PowerMax Tension Series
Electric Motorized Projection Screen PowerMax Tension Series User s Guide Important Safety & Warning Precautions Make sure to read this user s guide and follow the procedures below. Caution: The screen
More informationAMS 6ICT. Weather-Resistant Enclosure
Product Information Document Full range surface-mount loudspeaker for indoor and outdoor installation applications Watts continuous, 24 Watts peak power 6" ICT (Inductive Coupling Technology) point source
More informationLED Backlight for Technics amplifiers
LED Backlight for Technics amplifiers Technics SE-A900S Technics SE-A900SM2 Technics SE-A909S Technics SE-A1000 Technics SE-A1000M2 Technics SE-A1010 Rev. 1.2 B Description The LED module is designed to
More informationRevision 1.0 Parts List Minor
Revision.0 www.grindex.com Parts List 803.8 Minor Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 The data plate...3 Parts... 4 Exploded view...
More informationWaterVue TV Installation & User Manual
WaterVue TV Installation & User Manual 19 Waterproof TV Dimensions of TV Front screen 486mm x 340mm x 3mm Mounting Plate 467mm x 324mm x 48mm 24 Waterproof TV Dimensions of TV Front screen 576mm x 395mm
More informationInterface Connectors for Miniature, Portable Terminal Devices
NEW Interface Connectors for Miniature, Portable Terminal Devices ST Series Strong locking mechanism Right Mating direction Left Top 9N max. Overview Developed as external input/output connectors for the
More informationRGB 5050 PixelControl LED Super Flat Rope Part Numbers: PSFR-RGB-W-20
11235 West Bernardo Court, Suite 102 San Diego, CA 92127 888-880-1880 Fax: 707-281-0567 EnvironmentalLights.com RGB 5050 PixelControl LED Super Flat Rope Part Numbers: PSFR-RGB-W-20 PixelControl LED Super
More informationOWNER'S MANUAL SIGNAL COMMANDER
OWNER'S MANUAL SIGNAL COMMANDER THIS MANUAL CONTAINS INSTRUCTIONS FOR: LPDA 200 - INSTALLATION - OPERATION - TROUBLESHOOTING - EXPLODED PARTS DRAWING - WARRANTY AntennaTek, Inc. 425 S. Bowen, #4 Longmont,
More informationTHE CABLE TRAY SYSTEM
C A B L E S A N I T A T I O N C A B L E T R A Y S Y S T E M S THE CABLE TRAY SYSTEM The SILTEC cable tray system is a product, developed for optimum functionality and with focus on simplicity and accessibility,
More informationPilot Valves and Nema 4 Enclosures. Innovative Environmental Solutions
Pilot Valves and Nema 4 Enclosures Innovative Environmental Solutions Technical Specification Q Series Solenoid Solenoid used in the remote or integral actuation of dust collector diaphragm or pilot valves.
More informationScanning System S-2100
2D laser measurement system The fastest 2D laser measurement system in the world 119 m range Scan rate >1 million points/sec 360 vertical field of view System description The PENTAX Scanning System S-2100
More informationPOWER MOLE SERIES DA GAO RGBT RADIX
Techical Information Radix is a versatile solution for applications in space restricted surroundings. Radix is a compact and functional fixture that combines design with advance LED technology. Table of
More informationPREMIUM 5e F/UTP PRODUCTS
Siemon s end-to-end cabling system is guaranteed to provide transmission performance margins in excess of industry standards for category 5e parameters, while featuring excellent EMI resistance. has been
More informationIONIVAC Transmitter ITR 90
IONIVAC Transmitter ITR 90 The ITR 90 is a optimized combination transmitter The combination of a hot cathode ionisation sensor according to Bayard-Alpert and a Pirani sensor permits vacuum pressure measurements
More information6.2. Overview application tools for cable ties. Manual Processing Tools for Cable Ties. Pneumatic Tensioning Tools for Cable Ties
Application Tooling Overview application tools for cable ties 6.2 Manual Processing Tools for Cable Ties MK0-SB see page 56. MK20, MK2 MK3SP MK7 see page 56. see page 562. see page 562. MK7HT see page
More informationComplete Train Control. Run Your Trains, Not Your Track!
DH166PS Fits Many DCC-Ready HO Locomotives.672 x 1.074 x.259 17.08mm x 27.28mm x 6.6mm Features: FX3 Function outputs for prototypical lighting effects and on/off control: Digitrax Complete Train Control
More informationMT-RJ SECURE Product Expansion Now 10 Variants of the MT-RJ SECURE Products
MT-RJ Product Expansion Now 0 Variants of the MT-RJ Products In response to several customers, the MT-RJ product line has been expanded with an additional six color/key versions. In addition to the original
More informationScale Track System. 21 Century y Signal System 2-Rail Manual
Scale Track System st 21 Century y Signal System 2-Rail Manual TABLE OF CONTENTS Introduction...2-3 Road Signal Board Diagram and Definitions...4-6 Tips for Handling the Circuit Board...6 2-Rail Detector
More informationMounting Set ACCESSORIES
Mounting Set ACCESSORIES 271 Lupa-con Connector EPCOM/2 Flat Article Number Product Name Color Ends 5.01.0383 Lupa-con EPCOM/2 Connector Flat Black 5.01.0384 Lupa-con EPCOM/2 Connector Flat Black Lupa-con
More informationSuperior Tube Company. Tube Crop and Deburr Process Improvement. Phase 4
Superior Tube Company Tube Crop and Deburr Process Improvement Phase 4 Senior Design Fall 2010 Joshua Blechman Thomas Daddario William Ogram Matthew Ward 2 Table of Contents pg. # I. Customer Description
More informationTransformer. Owner s Manual INSTALLERS: PLEASE LEAVE THIS MANUAL WITH THE OWNER.
Transformer Owner s Manual INSTALLERS: PLEASE LEAVE THIS MANUAL WITH THE OWNER. APPLY S/N STICKER HERE LIMITED ONE YEAR WARRANTY ON SCREEN INNOVATIONS PRODUCTS Screen Innovations warrants its products,
More information