In this Issue: AMS News Letter. Software Updates. Display Phase Out. Topdressing. Spring Inside this issue:

Transcription

1 AMS News Letter Shearer Equipment Quarterly AMS News Spring 2017 Inside this issue: 17-1 software update Release notes 2 Improvements to Products 5 List John Deere updated data policy 6 Phasing out 2600 Display 7 AutoTrac Vision and RowSense model expansion 8 Top dressing with liquid manure 9 Have a topic you d like to see in our newsletter? Let us know! Send us an suggestion, addresses are below. In this Issue: Software Updates Display Phase Out Topdressing Visit our website or like us on Facebook for up to date information!!

2 Page Software update release notes Spring 2017 GreenStar Display: GS software compatibility notes: For John Deere Machine Sync functionality, GreenStar 3 (GS3) 2630 Displays must operate with matching software versions. (17-1 recommended). For John Deere Machine Sync coverage map sharing, shared coverage maps will not persist after updating displays from SU15-2 to any newer version. Perform software update at the conclusion of field operations to ensure no coverage maps are lost. Coverage maps will not persist if GS Display software is backdated from 17-1 to SU15-2 or older software version. AEF Certification functionality is only approved for 30 Series and newer tractors. ISOBUS AEF Certification functionality will disable the use of the virtual Original GreenStar Monitor mode within the GS Display and controllers that are designed for use with the Original GreenStar Monitor mode. Generation 4 CommandCenter setup profiles will not directly import into the GS Display. In order to import Gen4 CommandCenter profiles, first export data from the GS Display with the profile name JD4600. Next, using the same USB, export all data from the Gen4 CommandCenter. All data will be merged into the JD4600 profile and then can be imported into the GS Display. Software Version (17-1) is backwards compatible on all previous GreenStar Display hardware revisions. GS Display software (15-2 and earlier) is not compatible with new GS Display hardware revision H and later. Hardware revision letter is found in the 7th digit of display s serial number. Software Version (17-1) is backwards compatible on all previous GreenStar Display hardware revisions; however, previous GS Display software (16-1 and earlier) is not compatible with new GS Display hardware revision J and later. Hardware revision letter is found in the 7th digit of the display s serial number. New Features Documentation and Section Control When an Air Cart is being documented by a GS Display, the seeding operation will be the only operation painted on the coverage map. In all other applications, multiple operations can paint the coverage map at the same time. Data Cleanup - ISO File Server is now available in data cleanup Hagie Models Hagie Models including: STS10, STS12, STS14, STS16 and DTS10 are now supported with populated machine offsets showing a front mounted boom on the display. Section Control SeedStar 3 minimum turn on/off times have been changed to 0.1 seconds

3 Page Software update release notes Spring 2017 Resolved/Informational Items Advanced AutoTrac Settings - When using Reichhardt advanced AutoTrac settings, the increase and decrease buttons will max out at 255 instead of 200 when pressed several times. Guidance Line Import When utilizing third-party systems to create guidance lines, lines would only show up when importing entire profile. Documentation - Display Intermittently freezes when recording. Wireless Data Transfer - Wireless Data Transfer tab does not show up and information wasn t sent to John Deere Operations Center. Prescription Map Converter - Shapefiles have large gaps near boundaries. Prescription Map Alarm - Full page alarm for out of boundary rate being applied cannot be disabled. Diagnostic Readings - One of the GPS readings pages does not have menu softkeys to select. Implement Width - Slurry Applicator only shows 1 section instead of 6. Region 2 Only. AutoTrac Setup - Display locks up when using either the basic or advanced AutoTrac setup. Section Control - Section Control turns on when implement partially crosses over a boundary with settings set to minimize skip. Client Farm Field - Data shows "<Custom>" in Apex even though the data is correct. Import Data - Display locks up when processing data from Apex. AB Curves Radial shift creates false guidance lines. Documentation - Harvest field totals show zero after exported. ISOBUS Weight System - System is not detected correctly and shows up as "Other" Region 2 Only Guidance Turn Predictor - Count down to the next turn does not function when an exterior headland is present. GreenStar Display GS Display compatibility notes: Software Version is backwards compatible on all previous GreenStar (GS2) 1800 Display hardware revisions; however, previous GS Display software (15-1 and earlier) is not compatible with new GS Displays hardware revision E and later. Revision E GS Displays are produced after August, Hardware revision letter is found in the 7th digit of the display s serial number New Features: Hagie Models Hagie Models including: STS10, STS12, STS14, STS16 and DTS10 are now supported. Resolved/Informational Items: Cotton Pickers Various cotton images did not show up correctly on the display. CAN GS display not showing controllers or communicating on the CAN.

4 Page Software update release notes Spring 2017 StareFire TM 6000 Receiver: Receiver New Features: *Region 4 (US & Canada Only) and Region 2 Only John Deere Mobile RTK Signal. StarFire 6000 support and functionality for John Deere Mobile RTK Signal utilizing a Modular Telematics Gateway (MTG) with active JDLink subscription (Region 4 and Region 2) or John Deere Mobile RTK Modem (Region 2). Resolved/Informational Items: RTK Extend RTK correction mode will now continue to have RTK-X for up to 14 days if the criteria in the RTK-X Diagnostics pages is met. Serial Output NMEA messaging to third party displays will now continuously send the correct GPS position. SF1 Line Drift Guidance lines will no longer move back and forth when sitting still while using SF1. StarFire 3000 Receiver: Receiver Resolved/Informational Items: Incorrect Signal Type DTC text has been corrected and will no longer pop up when a receiver is moved to a new machine. TCM Temperature Out of Range DTC will no longer pop up a notification to the user on the display.

5 Page 5 Improvements to Products List Spring 2017 Save time and improve data quality by using standard product lists from Agrian and Ag Connections, LLC Standard product lists from Agrian (chemicals) and Ag Connections, LLC (seed) are now available in John Deere Operations Center. This integration brings value to John Deere equipment owners and their crop advisors through more efficient work flows and more consistent and accurate recordkeeping. In addition, we have made it easier to search for and add products. A smarter search function queries the improved database and users now have the ability to select multiple products at one time. Take advantage of these new features for planting set-up this spring! Updated Layout:

6 Page 6 John Deere updated data policy Spring 2017

7 Page 7 Phasing out 2600 Display Spring 2017 John Deere is phasing out 2600 display The last software update for the GreenStar /2600 Displays was November The following support activities will cease after November 2017: Demo Activations - Global Support Center (GSC) General Support - GSC Assisted Activation/Subscription Transfers (2100/ /2600)*** o Activation/Subscription Transfers can still be completed by the dealer via the Stellar Support website beyond this date - Dealer Technical Assistance Center - Display Recovery The following support activities will cease after November 2025: - Dealer Parts Assistance Center Dates that have not been determined: (empty cells in the list; once dates are determined, dealers will receive a 6-month prior notice) - New Activation/Subscription Purchases ** o Does not include upgrade activations - Stellar Support Website Activation/Subscription Transfers*** o Available through Stellar Support website and can be completed by dealer Tactical Marketing Production & Precision Ag To: All US and Canada A&T Dealers 13 February 2017 Dealer Information Only - Activation/Subscription Upgrade Transfers ( )* Upgrade transfers would fall under newer model support guidelines as an example, the ability (date) to transfer activations from itc to SF3000 is dependent on support plans for SF3000. Software Download Availability - Remanufactured Parts Availability For more information,

8 Page 8 AutoTrac Vision and RowSense model expansion Spring 2017

9 Page 9 Top Dressing with Liquid manure Spring 2017 Relevant Topdressing Information As the weather continues to warm up, topdressing wheat has quickly become a priority. Many farmers have questions on when is the best time to topdress their wheat and make the best use of their nitrogen. Many farmers will tell you that the best time to apply is as soon as the field is fit to be in and in many ways, they re not wrong. There are some years that stay cool enough into the spring that the wheat has not broken dormancy in a decent amount of time In a typical growing season, the optimal time to apply a form of N for your wheat is after Feekes Growth Stage 6, or stem elongation/jointing. However, this year might be a different story with the widespread, unusually warm winter we have had across the state. The Ohio State University Extension office published a very relevant article on the factors to consider on topdressing your wheat. The link to the article can be found below: Ohio State also has done some research, over the last three growing seasons, on topdressing wheat with liquid swine manure. This article touches on some basic topics such as typical N content for manure, some of the best practices they have come across while doing this study, as well as their results from the past three years of research. This article can be found below: