råáîéêë~ä=aáöáí~ä=`áåéã~=méçéëí~ä

Transcription

1 råáîéêë~ä=aáöáí~ä=`áåéã~=méçéëí~ä fåëí~ää~íáçå=dìáçé Manual #: Revision: 01 Universal Digital Cinema Pedestal Part Number R858605

2 råáîéêë~ä=aáöáí~ä=`áåéã~=méçéëí~ä== ==fåëí~ää~íáçå=dìáçé `çéóêáöüí Barco. May 21, 2008 All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of Barco. kçíáåé Barco provides this manual as is without warranty of any kind, either expressed or implied, including but not limited to the implied warranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/ or the program(s) described in this publication at any time without notice. This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information in this publication; these changes are incorporated in new editions of this publication. dì~ê~åíéé=~åç=`çãééåë~íáçå Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarantee. On receipt, the purchaser must immediately inspect all delivered goods for damage incurred during transport, as well as for material and manufacturing faults Barco must be informed immediately in writing of any complaints. The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of compliant, Barco can repair the fault or provide a replacement at its own discretion within an appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a reduction in the purchase price or cancellation of the contract. All other claims, in particular those relating to compensation for direct or indirect damage, and also damage attributed to the operation of software as well as to other services provided by Barco, being a component of the system or independent service, will be deemed invalid provided the damage is not proven to be attributed to the absence of properties guaranteed in writing or due to the intent or gross negligence or part of Barco. If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid. Not included in the guarantee coverage are system failures which are attributed to programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear as well as normal maintenance are not subject to the guarantee provided by Barco either. The environmental conditions as well as the servicing and maintenance regulations specified in this manual must be complied with by the customer. 2 Universal Digital Cinema Pedestal Installation Guide

3 qê~çéã~êâë Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their respective holders. All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for the products or their manufactures. `çãé~åó=^ççêéëë Barco, Inc Trade Center Drive Rancho Cordova, California USA Phone: (916) Fax: (916) Website: Barco N.V. Noordlaan Kuurne BELGIUM Phone: Fax: Website: lééê~íçêë=p~ñéíó=pìãã~êó The general safety information in this summary is designed for installation and operating personnel. p~ñéíó=~åç=e~åçäáåö Use all proper safety and handling practices when installing and operating this product. dêçìåçáåö=íüé=mêççìåí A dedicated ground stud is provided at the center of the product, in the bottom. To ensure safety to all installation and operational personnel, connect a ground wire from this stud to earth ground, using a wire 14AWG (or larger) in size. Universal Digital Cinema Pedestal Installation Guide 3

4 bèìáéãéåí=j~êâáåö=~åç=p~ñéíó=qéêãë= t^okfkd Highlights an operating procedure, practice, condition, statement, etc., which, if not strictly observed, could result in injury to or death of personnel. Note Highlights an essential operating procedure, condition or statement. `^rqflk The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. ^sboqfppbjbkq> Le point d exclamation dans un triangle equilatéral signale à alerter l utilisateur qu il y a des instructions d operation et d entretien tres importantes dans la litérature qui accompagne l appareil. slopf`eq Ein Ausrufungszeichen innerhalb eines gleichwinkeligen Dreiecks dient dazu, den Benutzer auf wichtige Bedienungs-und Wartungsanweisungen in der Dem Great beiliegenden Literatur aufmerksam zu machen. `Ü~åÖÉ=eáëíçêó The table below lists the changes to the Universal Digital Cinema Pedestal Installation Guide. Table 0-1. Change History Rev Date ECP # Description Approved By 00 1/09/08 N/A Universal Digital Cinema Pedestal Installation Guide A. Gaweda /21/ Universal Digital Cinema Pedestal Installation Guide - Revisions A. Gaweda 4 Universal Digital Cinema Pedestal Installation Guide

5 q~ääé=çñ=`çåíéåíë `Ü~éíÉê=N `Ü~éíÉê=O `Ü~éíÉê=P ^éééåçáñ=^= fåíêççìåíáçå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= T In This Chapter Chapter Structure How to Use This Guide Navigating Table of Contents and Index Conventions About the Universal Digital Cinema Pedestal Overview Features Ordering Part Numbers e~êçï~êé=lêáéåí~íáçå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=NN In This Chapter Universal Digital Cinema Pedestal Description fåëí~ää~íáçå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=NR In This Chapter Safety Precautions Unpacking and Inspection Site Preparation Adapter Information Installation and Setup Alignment and Leveling pééåáñáå~íáçåëk=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=op In This Appendix Physical Specifications ^éééåçáñ=_= `çåí~åí=fåñçêã~íáçå=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=or In This Appendix Warranty Return Material Authorization (RMA) Contact Information fåçéñ =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=OT Universal Digital Cinema Pedestal Installation Guide 5

6 Table of Contents 6 Universal Digital Cinema Pedestal Installation Guide

7 NK==fåíêçÇìÅíáçå få=qüáë=`ü~éíéê This chapter introduces you to the Universal Digital Cinema Pedestal Installation Guide. Areas to be covered are: Chapter Structure How to Use This Guide Conventions About the Universal Digital Cinema Pedestal `Ü~éíÉê=píêìÅíìêÉ The following chapters are provided: Chapter 1, Introduction provides a system overview and a list of features. Chapter 2, Hardware Orientation on page 11 provides detailed diagrams of the Universal Digital Cinema Pedestal. Chapter 3, Installation on page 15 provides Universal Digital Cinema Pedestal installation instructions. Appendix A, Specifications on page 23 lists the Universal Digital Cinema Pedestal s specifications. Appendix B, Contact Information on page 25 lists important Barco contact, RMA, warranty and technical support details. Universal Digital Cinema Pedestal Installation Guide 7

8 NK==fåíêçÇìÅíáçå How to Use This Guide eçï=íç=rëé=qüáë=dìáçé This section provides important tips for streamlining your use of this Installation Guide in its electronic PDF form. k~îáö~íáåö Use Acrobat Reader s bookmarks to navigate to the desired location. All chapter files have the same bookmark structure for instant navigation to any section. Please note: Extensive hyperlinks are provided within the chapters. Use Acrobat s Go to Previous View and Return to Next View buttons to trace your complete navigational path. Use the Previous Page and Next Page buttons to go to the previous or next page within a file. Use Acrobat s extensive search capabilities, such as the Find tool and Search Index tool to perform comprehensive searches as required. q~ääé=çñ=`çåíéåíë=~åç=fåçéñ Use the Table of Contents bookmarks to navigate a desired topic. Click any item to instantly jump to that section of the guide. You can also use the Index to jump to specific topics within a chapter. Each page number in the Index is a hyperlink.\ `çåîéåíáçåë= The following conventions are used throughout this guide: The symbol denotes an operations procedure. The symbol denotes an example. Entries written in bold-face capital letters denote physical buttons or chassis connectors. 8 Universal Digital Cinema Pedestal Installation Guide

9 NK==fåíêçÇìÅíáçå About the Universal Digital Cinema Pedestal ^Äçìí=íÜÉ=råáîÉêë~ä=aáÖáí~ä=`áåÉã~=mÉÇÉëí~ä The following topics are discussed in this section: Overview Features Ordering Part Numbers lîéêîáéï The Universal Digital Cinema Pedestal is an optional component that is used to facilitate the mounting and installation of Barco DP-series projectors. Figure 1-1. Universal Digital Cinema Pedestal The pedestal is designed for the following Barco series digital cinema projectors: DP-1500 DP-2000 DP-3000 (with the additional adaptor kit) The pedestal s design is capable of supporting 600 pounds. It offers a rigid architecture that supports a single DP-3000 projector, or a dual vertically stacked projector configuration. Within the pedestal, sufficient venting is provided for a full complement of rack-mounted processing and switching equipment, such as Barco s ACS Universal Digital Cinema Pedestal Installation Guide 9

10 NK==fåíêçÇìÅíáçå About the Universal Digital Cinema Pedestal Please note: To ensure trouble-free installation of your Universal Digital Cinema Pedestal, please review the following sections: ~ Chapter 2, Hardware Orientation on page 11. ~ Chapter 3, Installation on page 15. Should you have any questions regarding the installation of the Universal Digital Cinema Pedestal, please consult with the factory. Refer to Appendix B, Contact Information on page 25 for details. cé~íìêéë Major features of the Universal Digital Cinema Pedestal=system are listed below: Supports both single and dual vertically stacked projector configurations. Provides 17RU of rack space (either in the front or the back of the unit). Provides a tilting platform with adjustments up to 6 degrees in elevation. An additional 6 degrees can be achieved by adjusting the pedestal s leveling feet. Offers an optional adapter kit for the DP Provides removable side panels for ease of access to rack mounted equipment. Provides a center-stud for common earth ground. Provides adjustable rear support brackets for rack equipment with extra depth. lêçéêáåö=m~êí=kìãäéêë In the US: For projectors DP-1500 & DP-2000, order Part Number R (Pedestal US) For projector D-P3000, order Part Number R (Pedestal US) + R (Adapter Kit US) Outside the US: For projectors DP-1500 & DP-2000, order Part Number R (Pedestal EU) For projector D-P3000, order Part Number R (Pedestal EU) + R (Adapter Kit EU) 10 Universal Digital Cinema Pedestal Installation Guide

11 OK==e~êÇï~êÉ=lêáÉåí~íáçå få=qüáë=`ü~éíéê This chapter provides detailed diagrams of the Universal Digital Cinema Pedestal. The following topics are discussed: Universal Digital Cinema Pedestal Description Universal Digital Cinema Pedestal Installation Guide 11

12 2. Hardware Orientation Universal Digital Cinema Pedestal Description råáîéêë~ä=aáöáí~ä=`áåéã~=méçéëí~ä=aéëåêáéíáçå The figure below illustrates the Universal Digital Cinema Pedestal: Figure 2-1. Universal Digital Cinema Pedestal 1) Tilting Platform 3) Rack Space 5) Side Panels 2) Lifting Flange 4) Tilt Adjustment Latch 6) Leveling Feet Following are descriptions of each pedestal section: 1) Tilting Platform The Tilting Platform can be adjusted from 0 to 6 degrees in elevation, in 1- degree increments. Note that for DP-3000 projectors, the optional Adapter Plate Kit must be installed, as shown below. Figure 2-2. Optional DP-3000 Adapter Plate Kit installed In Chapter 3, refer to the Adapter Information section on page 17 for details 2) Lifting Flange A Lifting Flange is provided for ease and comfort in lifting the Tilting Platform. 12 Universal Digital Cinema Pedestal Installation Guide

13 2. Hardware Orientation Universal Digital Cinema Pedestal Description 3) Rack Space 17RU of equipment Rack Space is provided, both in the front and in the back of the pedestal unit. Note For ease of cabling and equipment access, it is recommended that you install equipment in either the front or rear rack areas but not in both. 4) Tilt Adjustment Latch Two Tilt Adjustment Latches are provided one on each side of the Tilting Platform. To make it easy to set both sides to the same height, the latches are marked with numbers representing the desired angle. 5) Side Panels On each side of the pedestal, removable side panels are provided for ease of access to all rack mounted equipment. 6) Leveling Feet Four adjustable leveling feet are provided. Each can be adjusted with a wrench. Universal Digital Cinema Pedestal Installation Guide 13

14 2. Hardware Orientation Universal Digital Cinema Pedestal Description 14 Universal Digital Cinema Pedestal Installation Guide

15 PK==fåëí~ää~íáçå få=qüáë=`ü~éíéê This chapter provides detailed instructions for installing the Universal Digital Cinema Pedestal. The following topics are discussed: Safety Precautions Unpacking and Inspection Site Preparation Adapter Information Installation and Setup Alignment and Leveling Universal Digital Cinema Pedestal Installation Guide 15

16 3. Installation Safety Precautions p~ñéíó=mêéå~ìíáçåë= For all Universal Digital Cinema Pedestal installation procedures, observe the following important safety and handling rule to avoid damage to yourself and the equipment: Important A dedicated ground stud is provided at the center of the unit, in the bottom. To ensure safety to installation and operations personnel, connect a ground wire from this stud to earth ground, using a wire 14AWG or larger in size. råé~åâáåö=~åç=fåëééåíáçå= To unpack and inspect the Universal Digital Cinema Pedestal: 1. Inspect the shipping box for damage. If you find any damage, notify the shipping carrier immediately for all claims adjustments. 2. As you open the box, compare its contents against the packing slip. If you find any shortages, contact your Barco sales representative. 3. Remove and discard any straps, cardboard cover, and the carton from the pedestal. If the shipment includes the optional large projector platform and kit, also unpack those items. 4. Once you have removed all the components from their packaging and checked that all the listed components are present, visually inspect the unit itself to ensure there was no damage during shipping. If there is damage, notify the shipping carrier immediately for all claims adjustments. Important Leave the pedestal on its pallet/skid, and leave the leveling feet fully retracted until the pedestal is placed near its final installation point. Do not extend the leveling feet until the unit is in place, including being lifted onto a platform, stand, or plinth, if applicable. páíé=mêéé~ê~íáçå= The environment in which you install your Universal Digital Cinema Pedestal should be clean, properly lit, free from static, and have adequate power, ventilation, and space for all components. 16 Universal Digital Cinema Pedestal Installation Guide

17 3. Installation Adapter Information ^Ç~éíÉê=fåÑçêã~íáçå The table below provides information regarding supplied or optional adapters: Table 3-1. Universal Digital Cinema Pedestal Adapters Adapter Description Quantity Adapter Plate Kit (US) PN R858605, Optional Adapter Plate Kit for DP-3000 projectors Option Adapter Plate Kit (EU) PN R , Optional Adapter Plate Kit for DP-3000 projectors Option The figure below illustrates the optional Adapter Plate Kit, as installed on the pedestal. Figure 3-1. Optional Adapter Plate Kit Installed Universal Digital Cinema Pedestal Installation Guide 17

18 3. Installation Installation and Setup fåëí~ää~íáçå=~åç=péíìé Use the following steps to install the Universal Digital Cinema Pedestal: Caution Do not attempt to install a projector on top of a pedestal which has sustained structural damage, as the pedestal may be unstable or unsafe. If this condition occurs, please contact Barco for assistance. 1. Move the pedestal to its final location. Please note: ~ Get the pedestal as close to the final location as possible, before taking it off the pallet. ~ Prior to placing the Universal Digital Cinema Pedestal in its final location, do not install any equipment in the pedestal s rack area, and do not install a projector on top of the pedestal. The pedestal is not intended to be moved after equipment has been installed into or onto it. 2. When placing the pedestal in position, keep in mind the relative locations of the nearby equipment racks or other system components that will be installed. Please note: ~ To allow for the overhang of the projector lens, always allow sufficient room between the front of the pedestal and any walls or projection ports. This will usually be a minimum of 12 inches (30 cm). ~ Allow additional space if 3D attachments or a large model projector is to be used (e.g., DP90, DP3000). 3. Prior to mounting a projector on the pedestal or loading any equipment into its rack area, extend the leveling feet far enough so that they can easily be adjusted with a wrench later. It is recommended that you extend the feet approximately 1 inch or 25mm, as shown below. Figure 3-2. Leveling feet 4. At the time of shipment, a locknut is located on each foot, on the inside of the base. Remove the four side covers to access the locknuts. Please note: ~ If the leveling feet are to be extended substantially, the locknut may be relocated to the bottom, below the base. This will require removing and reinstalling each foot. 18 Universal Digital Cinema Pedestal Installation Guide

19 3. Installation Installation and Setup ~ Extending the feet may require tipping the unit up on one side (which is why this step should be done before adding equipment to the pedestal). Important Do not attempt the final leveling of the pedestal at this time, as that procedure will be done once a projector is installed. 5. If a smaller model projector is used, skip this step. If a large projector is used (e.g., DP-90 or DP-3000), perform the following steps to install the Adapter Kit: a. Install the adapter plate on top of the pedestal with the supplied hardware. b. Remove the backing from the four rubber pads provided with the pedestal, and attach them in the four corners of the adapter plate. c. If you want to install the DP-3000 s lamp power supply (LPS) inside the pedestal, perform the following steps. Use the figure below for reference: Figure 3-3. Inside view of Pedestal, showing panel installation locations Remove the side panels from the pedestal. Install the supplied 9RU Blank Panel on the inside of the pedestal at location (1). Install the supplied 2.2RU Blank Panel on the inside of the pedestal at location (2). Install the supplied top cover on the inside of the pedestal at location (3). Before installing the LPS, remove the top carrying handles from the LPS chassis. Note that you may need to relocate the AC power cable through the alternate side knockout on the LPS. Universal Digital Cinema Pedestal Installation Guide 19

20 3. Installation Installation and Setup 6. Four rubber pads ship with each pedestal. Three of the pads are used with smaller projectors (i.e. DP-1500 or DP-2000). Remove the backing from each pad and install as shown below, arrows 'A'. Figure 3-4. Pedestal top view Please note: ~ Ensure that the top surface is clean and dry prior to attaching the pads. ~ Cleaning the surface with Isopropyl alcohol prior to attaching the pads will promote adhesion. 7. For smaller projector models, a knockout is provided to allow passage of the power cord at the rear corner of the pedestal. Remove the knockout at this time, if applicable. (See Figure 3-3, 'B' arrow). 8. If you wish to install rack equipment that is extra deep, four adjustable brackets are provided. On the inside rack rails, install these brackets as desired using the supplied mounting hardware. Figure 3-5. Adjustable rear support brackets, sample locations 20 Universal Digital Cinema Pedestal Installation Guide

21 3. Installation Alignment and Leveling 9. Ensure that the pedestal is located where it will remain prior to loading any equipment, including being placed on top of any platform, blocks, stand, plinth, etc. At this point, you may load equipment into the rack area and install the projector on top of the pedestal. ^äáöåãéåí=~åç=iéîéäáåö Side-to-side leveling is accomplished by adjusting the leveling feet. There are two ways to adjust the front-to-rear tilt angle: Coarse adjustment is performed adjusting the Tilting Platform downward from zero to 6 degrees, in 1-degree increments. Fine tilt adjustment is performed with the leveling feet. Note The vertical lens shift capability on the projector may be used for fine tilt adjustments. Five degrees of tilting capability is provided by the leveling feet, which when combined with the six degrees available by adjusting the Tilting Platform, provides more than 10 degrees of total downward tilt capability. Note Upward tilt capability is limited to the 5 degrees provided by the feet To level the projector: 1. Turn on the projector. 2. Select a test pattern that includes marks for the full extent of the image to be used. 3. Adjust the zoom setting on the lens to a setting that approximately fills the screen. 4. Ensure that the pedestal and projector are stable, e.g., all four feet are in contact with the floor, so that the system doesn't wobble from side-to-side. 5. Adjust one or two of the feet until the unit is stable and the image is approximately level from side-to-side that is, the left and right lower corners of the image are equidistant from the floor, and the left and right upper corners are equidistant from the ceiling. 6. Check if the left side of the image is a different overall height than the right side of the image (as measured from the top to the bottom of the image). If so, you must reposition the pedestal and adjust the horizontal offset of the lens to correct for keystone (see the projector manual for adjusting lens offset). 7. Once all four corners of the image are equidistant at the top and bottom, adjust the tilt angle of the pedestal to correspond to the angle required. Universal Digital Cinema Pedestal Installation Guide 21

22 3. Installation Alignment and Leveling a. Ensure that bolts 'C' and 'D' are loosened on both sides of the pedestal as shown below. Figure 3-6. Bolt locations b. From the rear of the pedestal, lift the Tilting Platform until the latches on both sides engage in the desired position. To make it easy to set both sides the same, the latches are marked with numbers representing the desired angle. c. Once the desired angle is reached, tighten the 'C' and 'D' bolts for maximum stability and safety. Caution When lifting and tilting the platform, keep your hands near the center of the lifting flange. This flat flange is provided for ease and comfort in lifting. Keep your hands and fingers away from the extreme right and left sides, as a potential pinch hazard may exist. 22 Universal Digital Cinema Pedestal Installation Guide

23 ^K==péÉÅáÑáÅ~íáçåë få=qüáë=^éééåçáñ This appendix provides detailed technical specifications for the Universal Digital Cinema Pedestal. The following topics are discussed: Physical Specifications Universal Digital Cinema Pedestal Installation Guide 23

24 ^K==péÉÅáÑáÅ~íáçåë Physical Specifications müóëáå~ä=pééåáñáå~íáçåë= The table below lists Universal Digital Cinema Pedestal physical specifications. Table A-1. Universal Digital Cinema Pedestal physical specifications. Parameter Detail Specification Mechanical Chassis H: inches (86.02 cm) W: inches (86.36 cm) D: inches (55.88 cm) Tilt Course adjustment Platform adjusts from 0 to 6 degrees, in 1-degree increments Fine adjustment Leveling feet adjust from 0 to 5 degrees Distance: floor to optical axis DP inches (466 mm), 18cm thread, feet fully out inches (333 mm), feet fully in Rack height DP2000 Rack inches (885.9 mm), feet fully retracted inches (1027 mm), feet fully extended Note: feet are 6.0 inches (152 mm) long, engaged thread, lock nut relocated under rack Max height of optical axis DP Pedestal inches (1493 mm), as measured from ground Note: any tilt applied via front foot rack adjustments or head (retracting), decreases height of optical axis Weight Shipping Weight 200 lbs (90.71 kg) 216 lbs (97.97 kg) The table below lists the optional Adapter Plate physical specifications. Table A-2. Optional Adapter Plate physical specifications. Parameter Detail Specification Mechanical Adapter Plate H: 0.75 inches (1.90 cm) W: inches ( cm) D: inches (73.02 cm) Weight 37 lbs (16.78 kg) 24 Universal Digital Cinema Pedestal Installation Guide

25 _K==`çåí~Åí=fåÑçêã~íáçå få=qüáë=^éééåçáñ The following topics are discussed in this Appendix: Warranty Return Material Authorization (RMA) Contact Information t~êê~åíó All video products are designed and tested to the highest quality standards and are backed by a full 3-year parts and labor warranty. Warranties are effective upon delivery date to customer and are non-transferable. Barco warranties are only valid to the original purchaser/owner. Warranty related repairs include parts and labor, but do not include faults resulting from user negligence, special modifications, lightning strikes, abuse (drop/crush), and/or other unusual damages. The customer shall pay shipping charges when unit is returned for repair. Barco will cover shipping charges for return shipments to customers. oéíìêå=j~íéêá~ä=^ìíüçêáò~íáçå=eoj^f In the unlikely event that a product is required to return for repair, please call the following number and ask for a Sales Engineer to receive a Return Merchandise Authorization number (RMA). (888) (North America only) RMA Conditions are listed below: a. Prior to returning any item, you must receive a Return Merchandise Authorization (RMA) number. b. All RMA numbers must appear on their return-shipping label. c. RMA numbers are valid for ten (10) days from issue date. d. All shipping and insurance charges on all RMAs must be prepaid by the customer Universal Digital Cinema Pedestal Installation Guide 25

26 _K==`çåí~Åí=fåÑçêã~íáçå Contact Information `çåí~åí=fåñçêã~íáçå Barco, Inc Trade Center Drive Rancho Cordova, California USA Phone: (916) Fax: (916) Website: Sales Contact Information Direct: (916) Toll Free: (888) Barco N.V. Noordlaan Kuurne BELGIUM Phone: Fax: Website: 26 Universal Digital Cinema Pedestal Installation Guide

27 fåçéñ ^ Acrobat usage navigating and searching ACS Adapter information Adapter Plate Kit , 17 _ Barco contact information DP-series projectors sales contact information warranty ` Change history Chapter structure Common earth ground Contact information Conventions Copyright a Digital Cinema Pedestal features hardware installation hardware orientation how to install introduction to specifications Documentation conventions and symbols DP DP DP adapter kit DP-series projectors b Earth ground Equipment marking terms c Features, Digital Cinema Pedestal d Guarantee and compensation e Hardware installation orientation History, change How to install Digital Cinema Pedestal level the projector unpack and inspect pedestal use this guide Hyperlinks f Information, adapters Inspection Installation hardware safety precautions site preparation unpacking and inspection Introduction to Digital Cinema Pedestal Universal Digital Cinema Pedestal Installation Guide 27

28 Index i Level projector Leveling feet Lifting flange k r Unpacking t Warranty Notice l Operators safety summary Ordering part numbers Orientation, hardware m Part numbers PDF file usage navigating and searching o Rack space , 13 Return material authorization RMA p Safety precautions summary Sales contact information Setup Side panels Site preparation Specifications Symbols q Terms, equipment marking Tilt adjustment latches Tilting platform , 12 Trademarks Universal Digital Cinema Pedestal Installation Guide