Is Now Part of. To learn more about ON Semiconductor, please visit our website at

Transcription

1 Is Now Part of To learn more about ON Semiconductor, please visit our website at Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at. Please any questio regarding the system integration to Fairchild_questio@oemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor ow the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor s product/patent coverage may be accessed at /site/pdf/patent-marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, coequential or incidental damages. Buyer is respoible for its products and applicatio using ON Semiconductor products, including compliance with all laws, regulatio and safety requirements or standards, regardless of any support or applicatio information provided by ON Semiconductor. Typical parameters which may be provided in ON Semiconductor data sheets and/or specificatio can and do vary in different applicatio and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. ON Semiconductor does not convey any licee under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless agait all claims, costs, damages, and expees, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

2 NC7SZ74 TinyLogic UHS D-Type, Flip-Flop with Preset and Clear Features Ultra-High Speed: t PD 2.6 (Typical) into 50pF at 5 CC High Output Drive: ±24mA at 3 CC Broad CC Operating Range: 1.65 to 5.5 Power Down High-Impedance Inputs/Outputs Over-oltage Tolerance Inputs Facilitate 5 to 3 Tralation Proprietary Noise/EMI Reduction Circuitry Ordering Information Description September 2018 The NC7SZ74 is a single, D-type, CMOS flip-flop with preset and clear from Fairchild s ultra high-speed series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive, while maintaining low static power dissipation over a very broad CC operating range of 1.65 to 5.5 CC. The inputs and outputs are high impedance when CC is 0. Inputs tolerate voltages up to 5.5, independent of CC operating voltage. The signal level applied to the D input is traferred to the Q output during the positive-going traition of the CLK pulse. Part Number Top Mark Package Packing Method NC7SZ74K8X SZ74 8-Lead US8, JEDEC MO-187, ariation CA 3.1mm Wide- NC7SZ74L8X N9 8-Lead MicroPak, 1.6 mm Wide 3000 Units on Tape & Reel 5000 Units on Tape & Reel NC7SZ74 TinyLogic UHS D-Type Flip-Flow with Preset and Clear NC7SZ74 Rev. 2

3 Connection Diagrams Pin Configuratio Figure 2. US8 (Top iew) IEEE/IEC Figure 1. Logic Symbol Figure 3. MicroPak (Top Through iew) Pin Definitio Pin # US8 Pin # MicroPak Name Description 1 7 CK Clock Pulse Input 2 6 D Data Input 3 5 /Q Flip-Flop Output 4 4 GND Ground 5 3 Q Flip-Flop Output 6 2 /CLR Direct Clear Input 7 1 /PR Direct Preset Input 8 8 CC Supply oltage Function Table Inputs Output Function /CLR /PR D CK Q /Q L H X X L H Clear H L X X H L Preset L L X X H H H H L L H H H H H L H H X Q n /Q n No Change H = HIGH Logic Level Qn = No change in data X = Immaterial Falling Edge L = LOW Logic Level Z = High Impedance = Rising Edge NC7SZ74 Rev. 2 2

4 Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditio and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditio may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit CC Supply oltage IN DC Input oltage OUT DC Output oltage I IK DC Input Diode Current IN < 0-50 ma I OK DC Output Diode Current OUT < 0-50 ma I OUT DC Output Source/Sink Current ±50 ma I CC or I GND DC CC or Ground Current ±50 ma T STG Storage Temperature Range C T J Junction Temperature Under Bias +150 C T L Junction Lead Temperature (Soldering, 10 Seconds) +260 C P D Power Dissipation at +85 C 250 mw ESD Human Body Model, JEDEC:JESD22-A Charge Device Model: JEDEC:JESD22-C Recommended Operating Conditio The Recommended Operating Conditio table defines the conditio for actual device operation. Recommended operating conditio are specified to eure optimal performance to the datasheet specificatio. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter Conditio Min. Max. Unit CC Supply oltage Operating Supply oltage Data Retention IN Input oltage OUT t r, t f Output oltage Input Rise and Fall Times Active State 0 CC 3-State CC =1.8, 2.5 ± CC =3.3 ± CC =5.0 ± T A Operating Temperature C JA Thermal Resistance Note: 1. Unused inputs must be held HIGH or LOW. They may not float. US8 250 MicroPak / C/W NC7SZ74 Rev. 2 3

5 DC Electrical Characteristics Symbol Parameter CC Conditio IH IL OH OL I IN I OFF I CC HIGH Level Control Input oltage LOW Level Control Input oltage HIGH Level Output oltage LOW Level Control Output oltage Input Leakage Current Power Off Leakage Current Quiescent Supply Current T A =+25 C T A =-40 to +85 C Min. Typ. Max. Min. Max to CC 0.65 CC 2.30 to CC 0.70 CC 1.65 to CC 0.35 CC 2.30 to CC 0.30 CC IN = IH, I OH =-100µA I OH =-4mA I OH =-8mA I OH =-16mA I OH =-24mA I OH =-32mA IN = IH, I OL =100µA I OL =4mA I OL =8mA I OL =16mA I OL =24mA I OL =32mA Units 1.65 to 5.5 IN 5.5 ±0.1 ±1.0 µa 0 IN or OUT = µa 1.65 to 5.50 IN =5.5, GND 1 10 µa NC7SZ74 Rev. 2 4

6 AC Electrical Characteristics T A =+25 C T A =-40 to +85 C Symbol Parameter CC Conditio Units Min. Typ. Max. Min. Max. Figure ± 0.20 C L =15pF f MAX t PLH, t PHL t PLH, t PHL t S t H t W t REC Maximum Clock Frequency Propagation Delay CK to Q, /Q Propagation Delay /CLR, /PR to Q, /Q Setup Time CK to D Hold Time, CK to D Pulse Width, CK, /PR, /CLR Recover Time /CLR, /PR to CK 3.30 ± 0.30 R D =1M S 1 =Open ± Figure ± 0.50 C L =50pF ± 0.50 R D =500, S 1 =Open ± 0.20 C L =15pF, R D =1M 3.30 ± 0.30 S 1 =Open ± Figure ± 0.30 C L =50pF ± 0.50 R D =500, S 1 =Open ± 0.20 C L =15pF, R L =1M 3.30 ± 0.30 S 1 =Open ± Figure ± 0.30 C L =50pF, ± 0.50 R D =500 S 1 =Open ± 0.20 C L =15pF, R L =1M 3.30 ± 0.30 S 1 =Open ± Figure ± 0.30 C L =50pF, ± 0.50 R D =500 S 1 =Open ± 0.20 C L =15pF, R L =1M 3.30 ± 0.30 S 1 =Open ± Figure ± 0.30 C L =50pF, ± 0.50 R D =500 S 1 =Open ± 0.20 C L =15pF, R L =1M 3.30 ± 0.30 S 1 =Open ± Figure ± 0.30 C L =50pF, ± 0.50 R D =500 S 1 =Open ± 0.20 C L =15pF, R L =1M 3.30 ± 0.30 S 1 =Open ± Figure ± 0.30 C L =50pF, ± 0.50 R D =500 S 1 =Open Continued on the following page NC7SZ74 Rev. 2 5

7 AC Electrical Characteristics Symbol Parameter CC Conditio T A =+25 C T A =-40 to +85 C Units Figure Min. Typ. Min. Typ. Min. C IN Input Capacitance 0 3 pf C OUT Output Capacitance 0 4 pf C PD Power Dissipation Capacitance (2) pf Note: 2. C PD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current coumption (I CCD ) at no output loading and operating at 50% duty cycle. C PD is related to I CCD dynamic operating current by the expression: I CCD =(C PD )( CC )(f IN )+(I CC static). Note: 3. C L includes load and stray capacitance. Input PRR=1.0MHz t w =500.. AC Test Circuit Notes: 4. CP input=ac Waveforms t r =t f = CP input PRR=10MHz; Duty Cycle=50%. 6. D input PRR=5MHz; Duty Cycle=50%. Figure 5. I CCD Test Circuit Figure 6. AC Waveforms Figure 7. AC Waveforms Figure 8. AC Waveforms NC7SZ74 Rev. 2 6

8 Physical Dimeio PIN 1 IDENT SEATING PLANE TOP IEW 0.90 MAX SIDE IEW 0.4 TYP 5 A B 0.2 C B A ALL LEAD TIPS ALL LEAD TIPS 0.1 C C (8X) 0.13 A B C GAGE PLANE (8X) (8X) RECOMMENDED LAND PATTERN A. CONFORMS TO JEDEC REGISTRATION MO-187 B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS ARE EXCLUSIE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS. D. DIMENSIONS AND TOLERANCES PER ANSI Y14.5M, E. FILE DRAWING NAME : MKT-MAB08Arev4 DETAIL A SEATING PLANE DETAIL A Figure 9. 8-Lead US8, JEDEC MO-187, ariation CA 3.1mm Wide Package drawings are provided as a service to customers coidering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specificatio do not expand the terms of Fairchild s worldwide terms and conditio, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor s online packaging area for the most recent package drawings: Tape and Reel Specificatio Please visit Fairchild Semiconductor s online packaging area for the most recent tape and reel specificatio: Package Designator Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed K8X Carrier 3000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed NC7SZ74 Rev. 2 7

9 Physical Dimeio 2X DETAIL A 8X(0.09) C B INDEX AREA (0.1) X X(0.2) TOP IEW BOTTOM IEW 2X C 0.05 C Notes: 1. PACKAGE CONFORMS TO JEDEC MO-255 ARIATION UAAD 2. DIMENSIONS ARE IN MILLIMETERS 3. DRAWING CONFORMS TO ASME Y.14M PIN 1 FLAG, END OF PACKAGE OFFSET 5. DRAWING FILE NAME: MKT-MAC08ARE4 A X 0.10 C 0.55 MAX 0.05 C 0.10 C A B 0.05 C Recommended Landpattern (0.15) (0.20) DETAIL A PIN #1 TERMINAL SCALE: 2X MAC08ARE4 Figure Lead, MicroPak, 1.6mm Wide Package drawings are provided as a service to customers coidering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specificatio do not expand the terms of Fairchild s worldwide terms and conditio, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor s online packaging area for the most recent package drawings: Tape and Reel Specificatio Please visit Fairchild Semiconductor s online packaging area for the most recent tape and reel specificatio: Package Designator Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed L8X Carrier 5000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed NC7SZ74 Rev. 2 8

10 NC7SZ74 Rev. 2 9

11 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor ow the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor s product/patent coverage may be accessed at /site/pdf/patent Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, coequential or incidental damages. Buyer is respoible for its products and applicatio using ON Semiconductor products, including compliance with all laws, regulatio and safety requirements or standards, regardless of any support or applicatio information provided by ON Semiconductor. Typical parameters which may be provided in ON Semiconductor data sheets and/or specificatio can and do vary in different applicatio and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. ON Semiconductor does not convey any licee under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless agait all claims, costs, damages, and expees, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor E. 32nd Pkwy, Aurora, Colorado USA Phone: or Toll Free USA/Canada Fax: or Toll Free USA/Canada orderlit@oemi.com Semiconductor Components Industries, LLC N. American Technical Support: Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: ON Semiconductor Website: Order Literature: For additional information, please contact your local Sales Representative