Features. Applications. STDP2500 Mobility DisplayPort (MyDP) to DP converter Rev 4

Transcription

1 Mobility DisplayPort (MyDP) to DP converter Rev 4 Data brief Features Mobility DisplayPort (MyDP) receiver Link rate HBR2/HBR/RBR 1 lane AUX_HPD single-ended AC coupled signal, 1 Mbps Supports edp operation DisplayPort transmitter DP 1.2a compliant Link rate HBR2/HBR/RBR 1, 2, or 4 lanes AUX CH 1 Mbps HPD monitoring HDCP repeater with embedded keys AUX_HPD translator to standard DP AUX CH and HPD Spread spectrum for EMI reduction Bandwidth Video resolution up to 1920 x 60 Hz, 24 bits per color Audio 7.1 Ch up to 192 khz sample rate Low power operation Powered from MyDP source or from DP sink Package 81 TFBGA (5 x 5 mm) Power supply voltages 3.3 V I/O; 1.2 V core Applications Audio-video accessory (dongle) for smart phones/tablets MYDP Input Main lane AUX_HPD DisplayPort Receiver Image Capture Video Format Converter DisplayPort Transmitter AUX CH & HPD Handler DP Output 4 lanes HPD AUX_CH I2C Slave Clock Generation OCM, SPI Doc ID Page 1 of 8

2 1. Description The STDP2500 is a Mobility DisplayPort to standard DisplayPort converter that facilitates streaming FHD 60 Hz video and audio from MyDP enabled smart phones and tablets to monitors and TVs with DisplayPort 1.2a compliant inputs. The STDP2500 is a VESA Mobility DisplayPort (MyDP) standard compliant device, implementing a single lane DisplayPort receiver and AUX_HPD. The output port comprises a standard DisplayPort 1.2a compliant transmitter with four main lanes, AUX channel, and HPD signal. The MyDP standard is a digital audio-video interconnect based on the VESA DisplayPort standard for a mobile source device capable of streaming uncompressed audio and video. It uses the existing standard 5-pin connector commonly used for charging the portable mobile devices to stream the audio-video to an external display. The STDP2500 uses MegaChips latest generation DisplayPort receiver technology that supports single AV stream at HBR2 speed, a data rate of 5.4 Gbps per lane. The DisplayPort output in STDP2500 is a four lane differential output capable of operating either at HBR2, HBR or RBR data rate. This device can convert audio-video stream received from a MyDP source on a single lane input at HBR2 data rate (5.4 Gbps) into two lanes output at HBR rate (2.7 Gbps) or four lane output at RBR rate (1.62 Gbps). It can deliver 1080p 60 Hz video with a color depth of 24 bits per pixel and audio up to 8 channels at 192 Kb sample rate from a MyDP source to DisplayPort1.1a based monitors. DisplayPort1.2a compliant monitors are capable of receiving MyDP input directly through a passive cable. STDP2500 complies with HDCP 1.3 content protection scheme with an embedded key option for secure transmission of premium digital AV content. It can also act as HDCP repeater for the downstream sink when used in a dongle application. The AUX_HPD is a single-ended sideband channel that assists in low speed data exchange between the MyDP source and STDP2500. The AUX_HPD message handling is mapped to the corresponding AUX channel message and HPD signal at the output port for the downstream sink. The AUX_HPD data transfer rate is 1 Mbps which is adequate for handling I2C and IR protocols. The MyDP source also uses the AUX_HPD channel for the DPCD read-write access. This device has an on-chip microcontroller with an optional SPI and I2C host interface for system configuration purpose. The STDP2500 implements a sink detection and monitoring feature that automatically puts the device into low power operation whenever the sink is disconnected. An STDP2500 based accessory (dongle) is powered from the downstream sink. In addition, DisplayPort1.2a compliant sinks in general are capable of charging the mobile source. Doc ID Page 2 of 8

3 2. Application overview Figure 1. STDP2500 in mobile accessory (dongle) application Monitor with DP1.1a input Mobile Device 27 MHz Crystal Dongle APE Video Control USB MYDP TX DP 1Main lane HBR2 STDP2500 AUX_HPD DP 4 lanes, HBR/RBR HPD AUX CH Power Doc ID Page 3 of 8

4 3. Feature attributes 3.1 Input interface Mobility DisplayPort Main link configuration (SST format only) HBR2/HBR/RBR link rate 1 lane AUX_HPD: 1 Mbps Manchester transaction format I2C over AUX_HPD IR over AUX_HPD Pixel bit depth: 24 bpp, 18 bpp Color format: RGB Audio: Up to 192 Kb samples/sec, 8 Ch/sample, 24 bits/ch 3.2 Output interface Standard DisplayPort 1.2a compliant Main link configuration (SST format only) HBR2/HBR/RBR link rate 4 lanes AUX_CH: 1 Mbps Manchester transaction format I2C over AUX IR over AUX HPD: IRQ_HPD monitoring Pixel bit depth: 24 bpp, 18 bpp Color format: RGB Audio: Up to 192 Kb samples/sec, 8 Ch/sample, 24 bits/ch 3.3 Supported video timings 1920 x 1080 (FHD) 60 Hz: 24 bits/pixel 1920 x 1080 (FHD) 30 Hz stereo 3D Doc ID Page 4 of 8

5 3.4 Supported audio timings Up to 8-Ch LPCM; word length up to 64 x Fs; bit depth up to 32 bits, sample rate up to 192 khz 3.5 Control channel interfaces AUX_HPD, I2C host interface, SPI and UART (UART for test/debug purposes only) 3.6 HDCP 1.3 support Key sets for DPRX and DPTX integrated in one-time programmable ROM (OTP) Standalone HDCP repeater capability 3.7 Package 81 TFBGA (5 x 5 mm), 0.5 ball pitch 3.8 Power supply voltages 3.3 V I/O; 1.2 V core 3.9 ESD 2 KV HBM, 500 V CDM Doc ID Page 5 of 8

6 4. Ordering information Table 1. Order codes Part number Description STDP2500-AD STDP2500-ADT 81 BGA (5 x 5 mm) delivered in trays 81 BGA (5 x 5 mm) delivered in tape and reel Doc ID Page 6 of 8

7 5. Revision history Table 2. Document revision history Date Revision Changes 05-Oct Initial release. 20-May Updated to comply with MegaChips documentation style/formatting. 25-Jun Updated with content from STDP2500 datasheet. 15-Sep Updated footers and added copyright information to last page. Doc ID Page 7 of 8

8 Notice Semiconductor products may possibly experience breakdown or malfunction. Adequate care should be taken with respect to the safety design of equipment in order to prevent the occurrence of human injury, fire or social loss in the event of breakdown or malfunction of semiconductor products The overview of operations and illustration of applications described in this document indicate the conceptual method of use of the semiconductor product and do not guarantee operability in equipment in which the product is actually used. The names of companies and trademarks stated in this document are registered trademarks of the relevant companies. MegaChips Co. provides no guarantees nor grants any implementation rights with respect to industrial property rights, intellectual property rights and other such rights belonging to third parties or/and MegaChips Co. in the use of products and of technical information including information on the overview of operations and the circuit diagrams that are described in this document. The product described in this document may possibly be considered goods or technology regulated by the Foreign Currency and Foreign Trade Control Law. In the event such law applies, export license will be required under said law when exporting the product. This regulation shall be valid in Japan domestic. In the event the intention is to use the product described in this document in applications that require an extremely high standard of reliability such as nuclear systems, aerospace equipment or medical equipment for life support, please contact the sales department of MegaChips Co. in advance. All information contained in this document is subject to change without notice. Copyright 2014 All rights reserved Head Quarters Miyahara, Yodogawa-ku Osaka , Japan TEL: Tokyo Office 17-6 Ichiban-cho, Chiyoda-ku, Tokyo , Japan TEL: Makuhari Office 1-3 Nakase Mihama-ku Chiba , Japan TEL: San Jose Office 2033 Gateway Place, Suite 400, San Jose, CA U.S.A. TEL: Taiwan Branch RM. B 2F, Worldwide House, No.129, Min Sheng E. Rd., Sec. 3, Taipei 105, Taiwan TEL: Tainan Office RM. 2, 8F, No.24, Da Qiao 2 Rd., Yong Kang Dist., Tainan 710, Taiwan TEL: Zhunan Office No.118, Chung-Hua Rd., Chu-Nan, Miao-Li 350, Taiwan TEL: Shenzhen Office Room 6307, Office Tower, Shun Hing Square, 5002 Shen Nan Dong Road, Luohu District, Shenzhen , P. R. China TEL: India Branch 17th Floor, Concorde Block UB City, Vittal Mallya Road, Bangalore , India TEL: Doc ID Page 8 of 8