AV Receiver RX-SL80 OWNER S MANUAL VOLUME/SELECT INPUT STANDBY /ON SILENT CINEMA VIDEO L AUDIO R OPTICAL AUTO/MAN'L PUSH-ENTER

Transcription

1 U AV Receiver RX-SL80 OWNER S MANUAL /SELECT TUNER DSP INPUT STANDBY /ON SILENT CINEMA VIDEO L AUDIO R OPTICAL AUTO/MAN'L PHONES VIDEO 2 PUSH-ENTER

2 IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Exlanation of Grahical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the resence of uninsulated dangerous voltage within the roduct s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to ersons. The exclamation oint within an equilateral triangle is intended to alert you to the resence of imortant oerating and maintenance (servicing) instructions in the literature accomanying the aliance. 1 Read Instructions All the safety and oerating instructions should be read before the roduct is oerated. 2 Retain Instructions The safety and oerating instructions should be retained for future reference. 3 Heed Warnings All warnings on the roduct and in the oerating instructions should be adhered to. 4 Follow Instructions All oerating and use instructions should be followed. 5 Cleaning Unlug this roduct from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. 6 Attachments Do not use attachments not recommended by the roduct manufacturer as they may cause hazards. 7 Water and Moisture Do not use this roduct near water for examle, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming ool; and the like. 8 Accessories Do not lace this roduct on an unstable cart, stand, triod, bracket, or table. The roduct may fall, causing serious injury to a child or adult, and serious damage to the roduct. Use only with a cart, stand, triod, bracket, or table recommended by the manufacturer, or sold with the roduct. Any mounting of the roduct should follow the manufacturer s instructions, and should use a mounting accessory recommended by the manufacturer. 9 A roduct and cart combination should be moved with care. Quick stos, excessive force, and uneven surfaces may cause the roduct and cart combination to overturn. 10 Ventilation Slots and oenings in the cabinet are rovided for ventilation and to ensure reliable oeration of the roduct and to rotect it from overheating, and these oenings must not be blocked or covered. The oenings should never be blocked by lacing the roduct on a bed, sofa, rug, or other similar surface. This roduct should not be laced in a built-in installation such as a bookcase or rack unless roer ventilation is rovided or the manufacturer s instructions have been adhered to. 11 Power Sources This roduct should be oerated only from the tye of ower source indicated on the marking label. If you are not sure of the tye of ower suly to your home, consult your roduct dealer or local ower comany. For roducts intended to oerate from battery ower, or other sources, refer to the oerating instructions. 12 Grounding or Polarization This roduct may be equied with a olarized alternating current line lug (a lug having one blade wider than the other). This lug will fit into the ower outlet only one way. This is a safety feature. If you are unable to insert the lug fully into the outlet, try reversing the lug. If the lug should still fail to fit, contact your electrician to relace your obsolete outlet. Do not defeat the safety urose of the olarized lug. 13 Power-Cord Protection Power-suly cords should be routed so that they are not likely to be walked on or inched by items laced uon or against them, aying articular attention to cords at lugs, convenience recetacles, and the oint where they exit from the roduct. 14 Lightning For added rotection for this roduct during a lightning storm, or when it is left unattended and unused for long eriods of time, unlug it from the wall outlet and disconnect the antenna or cable system. This will revent damage to the roduct due to lightning and ower-line surges. 15 Power Lines An outside antenna system should not be located in the vicinity of overhead ower lines or other electric light or ower circuits, or where it can fall into such ower lines or circuits. When installing an outside antenna system, extreme care should be taken to kee from touching such ower lines or circuits as contact with them might be fatal. 16 Overloading Do not overload wall outlets, extension cords, or integral convenience recetacles as this can result in a risk of fire or electric shock. 17 Object and Liquid Entry Never ush objects of any kind into this roduct through oenings as they may touch dangerous voltage oints or short-out arts that could result in a fire or electric shock. Never sill liquid of any kind on the roduct. 18 Servicing Do not attemt to service this roduct yourself as oening or removing covers may exose you to dangerous voltage or other hazards. Refer all servicing to qualified service ersonnel. 19 Damage Requiring Service Unlug this roduct from the wall outlet and refer servicing to qualified service ersonnel under the following conditions: a) When the ower-suly cord or lug is damaged, b) If liquid has been silled, or objects have fallen into the roduct, c) If the roduct has been exosed to rain or water, i

3 IMPORTANT SAFETY INSTRUCTIONS d) If the roduct does not oerate normally by following the oerating instructions. Adjust only those controls that are covered by the oerating instructions as an imroer adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the roduct to its normal oeration, e) If the roduct has been droed or damaged in any way, and f) When the roduct exhibits a distinct change in erformance - this indicates a need for service. 20 Relacement Parts When relacement arts are required, be sure the service technician has used relacement arts secified by the manufacturer or have the same characteristics as the original art. Unauthorized substitutions may result in fire, electric shock, or other hazards. 21 Safety Check Uon comletion of any service or reairs to this roduct, ask the service technician to erform safety checks to determine that the roduct is in roer oerating condition. 22 Wall or Ceiling Mounting The unit should be mounted to a wall or ceiling only as recommended by the manufacturer. 23 Heat The roduct should be situated away from heat sources such as radiators, heat registers, stoves, or other roducts (including amlifiers) that roduce heat. 24 Outdoor Antenna Grounding If an outside antenna or cable system is connected to the roduct, be sure the antenna or cable system is grounded so as to rovide some rotection against voltage surges and built-u static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, rovides information with regard to roer grounding of the mast and suorting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. ELECTRIC SERVICE EQUIPMENT EXAMPLE OF ANTENNA GROUNDING MAST GROUND CLAMP ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION ) GROUNDING CONDUCTORS (NEC SECTION ) GROUND CLAMPS Note to CATV system installer: This reminder is rovided to call the CATV system installer s attention to Article of the NEC that rovides guidelines for roer grounding and, in articular, secifies that the cable ground shall be connected to the grounding system of the building, as close to the oint of cable entry as ractical. NEC NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H) FCC INFORMATION (for US customers) 1 IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This roduct, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not exressly aroved by Yamaha may void your authority, granted by the FCC, to use the roduct. 2 IMPORTANT : When connecting this roduct to accessories and/or another roduct use only high quality shielded cables. Cable/s sulied with this roduct MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this roduct in the USA. 3 NOTE : This roduct has been tested and found to comly with the requirements listed in FCC Regulations, Part 15 for Class B digital devices. Comliance with these requirements rovides a reasonable level of assurance that your use of this roduct in a residential environment will not result in harmful interference with other electronic devices. This equiment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the oeration of other electronic devices. Comliance with FCC regulations does not guarantee that interference will not occur in all installations. If this roduct is found to be the source of interference, which can be determined by turning the unit OFF and ON, lease try to eliminate the roblem by using one of the following measures: Relocate either this roduct or the device that is being affected by the interference. Utilize ower outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial tye cable. If these corrective measures do not roduce satisfactory results, lease contact the local retailer authorized to distribute this tye of roduct. If you can not locate the aroriate retailer, lease contact Yamaha Electronics Cor., U.S.A Orangethore Ave, Buena Park, CA The above statements aly ONLY to those roducts distributed by Yamaha Cororation of America or its subsidiaries. ii 3

4 CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest erformance, lease read this manual carefully. Kee it in a safe lace for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean lace away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation sace of at least 5 cm on the to, 5 cm on the left and right, and 10 cm on the back of this unit. 3 Locate this unit away from other electrical aliances, motors, or transformers to avoid humming sounds. 4 Do not exose this unit to sudden temerature changes from cold to hot, and do not locate this unit in a environment with high humidity (i.e. a room with a humidifier) to revent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or ersonal injury. 5 Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exosed to liquid driing or slashing. On the to of this unit, do not lace: Other comonents, as they may cause damage and/or discoloration on the surface of this unit. Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or ersonal injury. Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit. 6 Do not cover this unit with a newsaer, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temerature inside this unit rises, it may cause fire, damage to this unit, and/or ersonal injury. 7 Do not lug in this unit to a wall outlet until all connections are comlete. 8 Do not oerate this unit uside-down. It may overheat, ossibly causing damage. 9 Do not use force on switches, knobs and/or cords. 10 When disconnecting the ower cord from the wall outlet, gras the lug; do not ull the cord. 11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 12 Only voltage secified on this unit must be used. Using this unit with a higher voltage than secified is dangerous and may cause fire, damage to this unit, and/or ersonal injury. YAMAHA will not be held resonsible for any damage resulting from use of this unit with a voltage other than secified. 13 To revent damage by lightning, disconnect the ower cord from the wall outlet during an electrical storm. 14 Do not attemt to modify or fix this unit. Contact qualified YAMAHA service ersonnel when any service is needed. The cabinet should never be oened for any reasons. 15 When not lanning to use this unit for long eriods of time (i.e. vacation), disconnect the AC ower lug from the wall outlet. 16 Be sure to read the TROUBLESHOOTING section on common oerating errors before concluding that this unit is faulty. 17 Before moving this unit, ress STANDBY/ON to set this unit in the standby mode, and disconnect the AC ower lug from the wall outlet. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This unit is not disconnected from the AC ower source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of ower. FOR CANADIAN CUSTOMERS To revent electric shock, match wide blade of lug to wide slot and fully insert. This Class B digital aaratus comlies with Canadian ICES-003. IMPORTANT Please record the serial number of this unit in the sace below. MODEL: Serial No.: The serial number is located on the bottom of the unit. Retain this Owner s Manual in a safe lace for future reference. We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association's Consumer Electronics Grou want you to get the most out of your equiment by laying it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion - and, most imortantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association s Consumer Electronics Grou recommend you to avoid rolonged exosure from excessive volume levels. iii

5 CONTENTS INTRODUCTION FEATURES... 2 GETTING STARTED... 3 Sulied accessories... 3 Installing batteries in the remote control... 3 CONTROLS AND FUNCTIONS... 4 Front anel... 4 Remote control (AMP mode)... 5 Using the remote control... 6 Front anel dislay... 7 PREPARATION SPEAKER SETUP... 8 Seaker lacement... 8 Seaker connections... 9 CONNECTIONS Before connecting comonents Connecting other comonents Connecting the antennas Connecting the ower Turning on the ower BASIC SETUP Using BASIC setu BASIC OPERATION PLAYBACK Basic oerations Selecting sound field rograms TUNING Automatic and manual tuning Presetting stations Selecting reset stations RECORDING SOUND FIELD PROGRAMS SOUND FIELD PROGRAM DESCRIPTIONS...28 For movie/video sources For music sources ADVANCED OPERATION ADVANCED OPERATIONS...31 Using the slee timer Enjoying multi-channel software Enjoying 2-channel software Virtual CINEMA DSP Selecting inut modes Manually adjusting seaker levels Using the test tone SET MENU...36 Changing arameter settings SOUND MENU INPUT MENU OPTION MENU REMOTE CONTROL FEATURES...44 Control area Setting remote control codes Controlling other comonents ADDITIONAL INFORMATION EDITING SOUND FIELD PARAMETERS...47 What is a sound field Sound field arameter descritions TROUBLESHOOTING...49 GLOSSARY...53 Audio formats Sound field rograms Audio information Video signal information SPECIFICATIONS...56 INTRODUCTION PREPARATION BASIC OPERATION SOUND FIELD PROGRAMS ADVANCED OPERATION ADDITIONAL INFORMATION 1

6 FEATURES FEATURES Built-in 5-channel original Yamaha digital ower amlifier Minimum RMS outut ower (0.9% THD, 1 khz, 6Ω) Front: 65 W + 65 W Center: 65 W Surround: 65 W + 65 W Sound field features Prorietary YAMAHA technology for the creation of sound fields Dolby Pro Logic/Dolby Pro Logic II decoder Dolby Digital/Dolby Digital + Matrix 6.1 decoder DTS/DTS + Matrix 6.1 decoder DTS 96/24 decoder Virtual CINEMA DSP SILENT CINEMA Sohisticated AM/FM tuner 40-station random access reset tuning Automatic reset tuning Other features 96-kHz/24-bit D/A converter SET MENU which rovides you with items for otimizing this unit for your audio/video system Screen Menu dislay outut to your TV monitor Slim-line design Otical and coaxial digital audio signal jacks Slee timer Night listening mode Remote control with reset remote control codes y indicates a ti for your oeration. Some oerations can be erformed by using either the buttons on the main unit or on the remote control. In cases when the button names differ between the main unit and the remote control, the button name on the remote control is given in arentheses. This manual is rinted rior to roduction. Design and secifications are subject to change in art as a result of imrovements, etc. In case of differences between the manual and roduct, the roduct has riority. The following name late is located on the bottom of this unit. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-d symbol are trademarks of Dolby Laboratories. DTS and DTS 96/24 are trademarks of Digital Theater Systems, Inc. SILENT CINEMA is a trademark of YAMAHA CORPORATION. 2

7 GETTING STARTED GETTING STARTED Sulied accessories Please check that you received all of the following arts. Remote control STANDBY/ON SLEEP Batteries (2) (AA, R6, UM-3) Indoor FM antenna (U.S.A., Canada, China, Asia and General models) INTRODUCTION STEREO HALL 1 2 JAZZ 3 ROCK 4 MUSIC ENTERTAIN TV THTR MOVIE STANDARD NIGHT EXTD SUR. STRAIGHT ENT EFFECT TV AV CODE SET REC FREQ/RDS EON s AUDIO PTY SEEK DISC SKIP MODE START w e f AM loo antenna A/B/C/D/E d PRESET u b a TITLE MENU LEVEL SET MENU CH ENTER CH + (U.K., Euroe, Australia and Korea models) RETURN DISPLAY TEST/ RETURN TV VOL MUTE AMP DVD/CD VCR VIDEO 1 Cable tags (5 airs) DTV/CBL TUNER VIDEO 2 MUTE INPUT + CH TV MODE Installing batteries in the remote control Insert the batteries in the correct direction by aligning the + and marks on the batteries with the olarity markings (+ and ) inside the battery comonent. Press Check +/ olarity Notes on batteries Change all of the batteries if you notice that the oeration range of the remote control has decreased. Do not use old batteries together with new ones. Do not use different tyes of batteries (such as alkaline and manganese batteries) together. Read the ackaging carefully as these different tyes of batteries may have the same shae and color. If the batteries ran out, immediately remove them from the remote control to revent an exlosion or acid leak. Disose of the batteries according to the regional regulations. If the batteries have leaked, disose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery comartment thoroughly before installing new batteries. 1 Remove the back cover. 2 Insert the two sulied batteries (AA, R6, UM-3) into the battery comartment. If the remote control is without batteries for more than 3 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries, set u the remote control code and rogram any acquired functions that may have been cleared. 3 Close the back cover. 3

8 CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS Front anel /SELECT TUNER DSP INPUT STANDBY /ON SILENT CINEMA VIDEO L AUDIO R OPTICAL AUTO/MAN'L PHONES VIDEO 2 PUSH-ENTER STANDBY/ON Turns on this unit or sets it to the standby mode. When you turn on this unit, you will hear a click and there will be a 4 to 5-second delay before this unit can reroduce sound. Note In standby mode, this unit consumes a small amount of ower in order to receive infrared-signals from the remote control. 2 PHONES (SILENT CINEMA) jack Oututs audio signals for headhones. When you connect headhones, no signals are outut to the seakers. All Dolby Digital and DTS audio signals are mixed down to the left and right headhone channels. 3 VIDEO 2 jacks Inut audio and video signals from a ortable external source such as a game console. To reroduce source signals from these jacks, select VIDEO 2 as the inut source. 4 Remote control sensor Receives signals from the remote control. 5 Front anel dislay Shows information about the oerational status of this unit. 6 /SELECT Adjusts the volume and the tone control. Also selects stations, sound field rograms or inut sources (etc.) when used together with TUNER, DSP, INPUT. If no oeration is erformed within 5 seconds of ressing TUNER, DSP, INPUT, the /SELECT function automatically returns to volume. 7 INPUT Activates the inut select mode. Activates the AM, FM or reset tuning mode when TUNER is selected as the inut source. 8 DSP Switches between the DSP sound field, STEREO and STRAIGHT modes. 9 TUNER (AUTO/MAN L) Activates the tuning mode when TUNER is selected as the inut source. Press before turning /SELECT to tune in frequencies or reset radio stations. Switches the AM/FM tuning mode between automatic ( AUTO indicator on) and manual ( AUTO indicator off) tuning. 4

9 CONTROLS AND FUNCTIONS Remote control (AMP mode) Make sure that the AMP mode is selected before starting oeration. 1 2 STANDBY/ON SLEEP 9 1 Infrared window Oututs infrared control signals. Aim this window at the comonent you want to oerate. 2 STANDBY/ON Switches the unit on and sets it in the STANDBY mode. 3 DSP rogram / Numeric buttons Use to select sound field rograms or inut numbers according to the current control area. INTRODUCTION 3 STEREO 1 5 HALL 2 JAZZ 3 MUSIC ENTERTAIN TV THTR 6 7 ROCK 4 MOVIE 8 4 Oeration buttons Provide functions such as lay, sto, ski, etc. for use when oerating other comonents STANDARD 9 TV AV CODE SET REC FREQ/RDS EON DISC SKIP w A/B/C/D/E b TITLE LEVEL s AUDIO PTY SEEK MODE START e f d PRESET u CH ENTER CH + RETURN TEST/ RETURN TV VOL NIGHT 0 EXTD SUR. STRAIGHT MUTE AMP +10 ENT EFFECT a MENU SET MENU DISPLAY DVD/CD VCR VIDEO 1 0,A,B C H D E F 5 LEVEL Selects the seaker channel to be adjusted and sets the level. 6 TEST/RETURN Oututs the test tone to adjust the seaker levels. Returns to the revious menu level when adjusting the SET MENU arameters. 7 MUTE Mutes the sound. Press again to restore the audio outut to the revious volume level. 8 AMP Sets the remote control to the AMP mode for controlling this unit (instead of the comonent selected using the inut selector buttons). 9 SLEEP Sets the slee timer. 0 NIGHT Turns night listening mode on or off. A EXTD SUR. Switches on or off the Dolby Digital + Matrix 6.1 or DTS + Matrix 6.1 decoding mode. DTV/CBL TUNER VIDEO 2 MUTE INPUT TV MODE CH + G B STRAIGHT/EFFECT Switches the sound fields off or on. When STRAIGHT is selected, inut signals (2-channel or multi-channel) are outut directly from their resective seakers without effect rocessing. C CODE SET Used to set u remote control codes. 5

10 STANDBY /ON SILENT CINEMA VIDEO L AUDIO R PHONES VIDEO 2 OPTICAL STANDBY/ON STEREO HALL JAZZ ROCK MUSIC STANDARD 9 TV 6 ENTERTAIN AV 7 TV THTR SLEEP 8 MOVIE CODE SET REC FREQ/RDS EON s AUDIO DISC SKIP w A/B/C/D/E b TITLE LEVEL MODE PTY SEEK START e f CH ENTER CH + RETURN TEST/ RETURN TV VOL 0 NIGHT EXTD SUR. d MUTE AMP +10 DVD/CD VCR VIDEO 1 DTV/CBL TUNER VIDEO 2 MUTE INPUT TV MODE STRAIGHT ENT EFFECT PRESET u a CH MENU SET MENU DISPLAY + TUNER AUTO/MAN'L DSP INPUT PUSH-ENTER /SELECT CONTROLS AND FUNCTIONS D SET MENU Turns the SET MENU on or off. Using the remote control E Multi control section Use to select and adjust DSP rogram arameters or SET MENU items. F +/ Increases or decreases the volume level. G Inut selector buttons Use to select the inut source and change the control area Aroximately 6 m (20 ft) U.K. and Euroe models only H RDS tuning buttons FREQ/RDS Press this button when the unit is receiving an RDS station to cycle the dislay between the PS mode, PTY mode, RT mode, CT mode (if the station offers those RDS data service) and/or the frequency dislay. PTY SEEK MODE Press this button to set the unit to the PTY SEEK mode. PTY SEEK START Press this button to begin searching for a station after the desired rogram tye has been selected in the PTY SEEK mode. EON Press this button to select a radio rogram tye (NEWS, INFO, AFFAIRS, SPORT) to tune in automatically. The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during oeration. Handling the remote control Do not sill water or other liquids on the remote control. Do not dro the remote control. Do not leave or store the remote control in the following tyes of conditions: high humidity such as near a bath high temerature such as near a heater or stove extremely low temerature dusty laces 6

11 CONTROLS AND FUNCTIONS Front anel dislay PCM VIRTUAL MATRIX DISCRETE NIGHT DIGITAL SILENT PL PL VCR VIDEO 1 VIDEO 2 DTV/CBL DVD/CD TUNER HiFi DSP PS PTY RT CT PTY HOLD EON STEREO TUNED MUTE SLEEP AUTO MEMORY ft ms db LFE L C R SL SB SR INTRODUCTION I H G F E D C B A 0 9 J (U.K. and Euroe models only) 1 Processor indicators When any of this unit s decoders function, the resective indicator lights u. 2 NIGHT indicator Lights u when you select NIGHT LISTENING mode. 3 Headhones indicator Lights u when headhones are connected. 4 CINEMA DSP indicator Lights u when you select a CINEMA DSP sound field rogram. 5 Inut source indicators A cursor lights to show the current inut source. 6 level indicators Indicate the volume level. 7 MUTE indicator Flashes while the MUTE function is on. 8 SLEEP indicator Lights u while the slee timer is on. 9 MEMORY indicator Flashes to show a station can be stored in memory. 0 Inut channel indicators Indicates the channel comonents of the inut digital signal. A LFE indicator Lights u when the inut signal contains the LFE signal. B AUTO indicator Shows that this unit is in the automatic tuning mode. C TUNED indicator Lights u when this unit is tuned into a station. D STEREO indicator Lights u when this unit is receiving a strong signal for an FM stereo broadcast while the AUTO indicator is lit. E HiFi DSP indicator Lights u when you select a HiFi DSP sound field rogram. F Multi-information dislay Shows the current sound field rogram name and other information when adjusting or changing settings. G SILENT CINEMA indicator Lights u when headhones are connected and a sound field rogram is selected (see age 19). H VIRTUAL indicator Lights u when Virtual CINEMA DSP is active (see age 33). I PCM indicator Lights u when this unit is reroducing PCM (ulse code modulation) digital audio signals. J RDS indicators (U.K. and Euroe models only) The name(s) of the RDS data offered by the currently received RDS station light(s) u. EON lights u when an RDS station that offers the EON data service is being received. PTY HOLD lights u while searching for stations in the PTY SEEK mode. 7

12 SPEAKER SETUP SPEAKER SETUP Seaker lacement You can enjoy this unit with the following seaker setu to obtain the best surround sound. SL SL FL C FR SR SR Surround seakers (SR and SL) The surround seakers are used for effect and surround sounds. Place these seakers behind your listening osition, facing slightly inwards, about 1.8 m (6 ft) above the floor. Subwoofer The use of a subwoofer, such as the YAMAHA Active Servo Processing Subwoofer System, is effective not only for reinforcing bass frequencies from any or all channels, but also for high fidelity reroduction of the LFE (lowfrequency effect) channel included in Dolby Digital and DTS software. The osition of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to lace the subwoofer near the front seakers. Turn it slightly toward the center of the room to reduce wall reflections. y The seaker layout above shows the standard ITU-R* seaker setting. ITU-R recommends that the front left and right seakers be laced at 30 from the central listening osition, and that the surround left and right seakers be laced at between 60 and 80 from the central listening osition. * ITU-R: for more information (see age 54). 1.8 m (6 ft) Front seakers (FR and FL) The front seakers are used for the main source sound lus effect sounds. Place these seakers an equal distance from the ideal listening osition. The distance of each seaker from each side of the video monitor should be the same. Center seaker (C) The center seaker is for the center channel sounds (dialog, vocals, etc.). If for some reason it is not ractical to use a center seaker, you can do without it. Best results, however, are obtained with the full system. Align the front face of the center seaker with the front face of your video monitor. Place the seaker centrally between the front seakers and as close to the monitor as ossible, such as directly over or under it. 8

13 SPEAKER SETUP Seaker connections Be sure to connect the left channel (L), right channel (R), + (colored) and (black) roerly. If the connections are faulty, no sound will be heard from the seakers, and if the olarity of the seaker connections is incorrect, the sound will be unnatural and lack bass. 4 Return the tab to secure the wire. R L R CAUTION Before connecting the seakers, make sure that the ower of this unit is off. Do not let the bare seaker wires touch each other or do not let them touch any metal art of this unit. This could damage this unit and/or seakers. Use magnetically shielded seakers. If this tye of seakers still creates the interference with the monitor, lace the seakers away from the monitor. A seaker cord is actually a air of insulated cables running side by side. One cable is colored or shaed differently, erhas with a strie, groove or ridges. Connect the stried (grooved, etc.) cable to the + (colored) terminals on this unit and your seaker. Connect the lain cable to the (black) terminals. 10 mm (3/8") Colored: ositive (+) Black: negative ( ) Cable tags 5 airs of different colored cable tags are rovided with this roduct. The colors of the cable tags and their resective seaker cables are as follows: Red: Front right seaker cable White: Front left seaker cable Green: Center seaker cable Gray: Surround right seaker cable Blue: Surround left seaker cable PREPARATION Remove aroximately 10 mm (3/8") of insulation from each of the seaker cables. To make it easier to distinguish the various seaker cables, attach the colored tags to the aroriate seaker cables as shown below. 2 Twist the exosed wires of the cable together to revent short circuits. 3 Press and hold the tab to insert the seaker wire. 9

14 SPEAKER SETUP Seaker connections Subwoofer with built-in Front seakers Surround seakers amlifier Right Left Center seaker Right Left This jack is reserved for factory use. Do not connect any equiment to this jack. AM ANT GND FM ANT DVD/CD VCR IN SPEAKERS FRONT CENTER SURROUND R L R L TUNER DIGITAL INPUT 75Ω UNBAL OPTICAL COAXIAL DVD DTV 1 VIDEO 1 /CD 2 /CBL 3 R AUDIO DTV/CBL VIDEO 1 L VIDEO VCR OUT R L OUTPUT SUBWOOFER VIDEO MONITOR + + MAINS FRONT terminals Connect your seaker system to these terminals. SURROUND terminals Connect surround seakers to these terminals. CENTER terminals Connect a center seaker to these terminals SUBWOOFER OUTPUT jack Connect a subwoofer with built-in amlifier, such as the YAMAHA Active Servo Processing Subwoofer System, to this jack. 4 y You can easily distinguish between the cable airs by attaching a sulied cable tag to each end of the resective seaker cable (see age 9). Seaker layout Notes If you are not using a subwoofer, allocate the signals to the front left and right seakers by changing the setting item LFE/Bass Out to FRONT on the SOUND menu (see age 39). Use the control on the subwoofer to adjust its volume level. You can also adjust the volume level using this unit s remote control (see age 35). 10

15 CONNECTIONS CONNECTIONS Before connecting comonents CAUTION Do not connect this unit or other comonents to the mains ower until all connections between comonents are comlete. Make sure that all connections are made correctly - that is to say, L (left) to L, R (right) to R, + to + and to. Some comonents require different connection methods and have different jack names. Refer to the oerating instructions for each comonent you wish to connect to this unit. After you have comleted all connections, check them again to make sure they are correct. The jack names corresond to the names on the inut selector. Signal directions and cable indications audio signal direction video signal direction For analog signals left analog cables right analog cables L R Analog jacks You can inut analog signals from audio comonents by connecting audio in cable to the analog jacks on this unit. Connect red lugs to the right jacks and white lugs to the left jacks. Digital jacks This unit has digital jacks for direct transmission of digital signals through either coaxial or fiber otic cables. You can use the digital jacks to inut PCM, Dolby Digital and DTS bitstreams. All digital inut jacks are comatible with 96-kHz samling digital signals. Notes This unit handles digital and analog signals indeendently. Thus audio signals inut to the digital (OPTICAL or COAXIAL) jacks are not outut to the analog VCR OUT (REC) jacks. The OPTICAL jacks on this unit conform to the EIA standard. If you use a fiber otic cable that does not conform to this standard, this unit may not function roerly. Dust rotection ca Pull out the ca from the otical jack before you connect the fiber otic cable. Do not discard the ca. When you are not using the otical jack, be sure to ut the ca back in lace. This ca rotects the jack from dust. PREPARATION For digital signals otical cables coaxial cables O C For video signals video cables V S 11

16 CONNECTIONS Connecting other comonents Connections for DVD layback Connect your DVD layer and video monitor to the jacks on the rear anel of this unit. Otical out DVD layer Video out Video monitor Audio out Video in O R L AM ANT GND FM ANT SPE DVD/CD VCR IN TUNER DIGITAL INPUT DVD /CD 75Ω UNBAL OPTICAL VIDEO 1 DTV /CBL COAXIAL R AUDIO DTV/CBL VIDEO 1 L VIDEO VCR OUT R L OUTPUT SUBWOOFER VIDEO MONITOR Note You may exerience some image distortion if your DVD layer is connected to this unit through your VCR rather than being directly connected to this unit. Connections for other AV comonents Connect the desired comonent(s) to the jacks on the rear anel of this unit. Otical out DTV or cable tuner Video out Audio out VCR Video in Audio out Audio in Video out O R L R L R L AM ANT GND FM ANT SPE DVD/CD VCR IN TUNER DIGITAL INPUT DVD /CD 75Ω UNBAL OPTICAL VIDEO 1 DTV /CBL COAXIAL R AUDIO DTV/CBL VIDEO 1 L VIDEO VCR OUT R L OUTPUT SUBWOOFER VIDEO MONITOR y You can assign how this unit s DIGITAL INPUT jacks corresond to the comonent to be used if this unit s initial settings do not meet your needs (see age 41). 12

17 CONNECTIONS VIDEO 2 jacks (on the front anel) Use these jacks to connect any video source, such as a game console or video camera, to this unit. VIDEO L AUDIO R OPTICAL VIDEO 2 V L R O Otical out Audio out R Audio out L Video out Game console or video camera PREPARATION 13

18 CONNECTIONS Connecting the antennas Both AM and FM indoor antennas are included with this unit. In general, these antennas should rovide sufficient signal strength. Connect each antenna correctly to the designated terminals. 3 Orient the AM loo antenna for the best recetion. AM loo antenna (included) White AM ANT TUNER GND Black FM ANT 75Ω UNBAL Indoor FM antenna (included) Notes The AM loo antenna should be laced away from this unit and all seaker cords. The AM loo antenna should always be connected, even if an outdoor AM antenna is connected to this unit. A roerly installed outdoor antenna rovides clearer recetion than an indoor one. If you exerience oor recetion quality, an outdoor antenna may imrove the quality. Consult the nearest authorized YAMAHA dealer or service center about outdoor antennas. Ground (GND terminal) For minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth. Frequency Ste (Asia and General models only) Because the interstation frequency sacing differs in different areas, set the FREQUENCY STEP (using SET MENU) according to the frequency sacing in your area (see age 43). North, Central and South America: 100 khz/10 khz Other areas: 50 khz/9 khz Connecting the AM loo antenna 1 Set u the AM loo antenna, then connect it to the terminals on this unit. 2 Lift u the tab and insert the white cord into the AM ANT terminal and the black cord into the GND terminal. Tab AM ANT terminal Cable wires White GND terminal Cable wires Black 14

19 STANDBY /ON SILENT CINEMA VIDEO L AUDIO R PHONES VIDEO 2 OPTICAL TUNER AUTO/MAN'L DSP INPUT PUSH-ENTER /SELECT CONNECTIONS Connecting the ower Connecting the AC ower After all other connections are comlete, lug the ower cord to an AC wall outlet. Memory back-u The memory back-u circuit revents the stored data from being lost even if this unit is in the standby mode. However if the ower cord is disconnected from the AC wall outlet, or the ower suly is cut for more than one week, the stored data will be lost. Turning on the ower When all connections are comlete, turn on the ower of this unit. 1 1 STANDBY/ON STEREO 1 MUSIC 5 STANDARD 9 TV or HALL 2 ENTERTAIN 6 NIGHT 0 JAZZ 3 TV THTR 7 EXTD SUR. AV +10 SLEEP ROCK 4 MOVIE 8 STRAIGHT ENT EFFECT PREPARATION CODE SET REC FREQ/RDS EON s AUDIO DISC SKIP MODE PTY SEEK START 1 Press STANDBY/ON on the front anel or remote control to turn on the ower of this unit. STANDBY/ON STANDBY /ON or Front anel Remote control The level of the main volume, and then the current sound field rogram name aear in the front anel dislay. 2 Turn on the video monitor connected to this unit. 15

20 BASIC SETUP BASIC SETUP The BASIC setu feature is a useful way to set u your system quickly and with minimal effort. The BASIC setu items are dislayed on both the front anel of this unit and your video monitor. By using the Screen Menu on your video monitor, you can easily make any necessary settings. y If you wish to configure the unit manually using more recise adjustments, use the detailed arameters in SOUND MENU (age 38) instead of using BASIC SETUP. Altering the arameters in BASIC SETUP may cause some of the arameters in SOUND MENU to be overwritten. The exlanations in this document are based on the Screen Menu. The characters shown in the front anel dislay may differ from those on the Screen Menu. Using BASIC SETUP Seaker set u 3 Press SET MENU. The to dislay aears on your video monitor. MENU SET MENU SET MENU. ;BASIC SETUP ;MANUAL SETUP [ ]/[ ]:U/Down [ENTER]:Enter 4 Press / to select BASIC SETUP, then ress ENTER. b a TITLE MENU LEVEL SET MENU CH ENTER CH + RETURN DISPLAY TEST/ RETURN ENTER ENTER TV VOL MUTE AMP DVD/CD VCR VIDEO 1 2 DTV/CBL TUNER VIDEO 2 MUTE INPUT + CH TV MODE 1 Switch on the receiver and video monitor. 2 Press AMP. AMP 5 Press / reeatedly to select ROOM. Use / to select the size of the room you have installed your seakers in. Roughly seaking, the room sizes are defined as follows: ; BASIC SETUP. ROOM : )S M L SWFR : YES)NONE SPEAKERS;;;;5sk SET )CANCEL [ ]/[ ]:U/Down [<]/[>]:Select [U.S.A. and Canada models] S (small) 16 x 13 ft, 200 sq. ft (4.8 x 4.0 m, 20 m 2 ) M (medium) 20 x 16 ft, 300 sq. ft (6.3 x 5.0 m, 30 m2) L (large) 26 x 19 ft, 450 sq. ft (7.9 x 5.8 m, 45 m 2 ) [Other models] S (small) 3.6 x 2.8 m, 10 m 2 M (medium) 4.8 x 4.0 m, 20 m2 L (large) 6.3 x 5.0 m, 30 m 2 16

21 BASIC SETUP 6 Press / reeatedly to select SWFR. Use / to select YES or NONE. YES If you have a subwoofer in your system. NONE If you do not have a subwoofer in your system. 7 Press / reeatedly to select SPEAKERS. Use / to select the number of seakers connected to the unit. The choices vary as follows: Choices Dislay Seakers Front L/R 2 sk 3 sk 4 sk L C R SL SB SR L CR SL SB SR L C R SL SB SR Front L/R, Center Front L/R, Surround L/R 9 Press / reeatedly to select YES or NO, then ress ENTER. If you want to change the seaker level after you hear the test tone select NO. YES To return to SET MENU. NO To enter B)SPEAKER LEVEL. Seaker level B)SPEAKER LEVEL Use this menu to comare and adjust the test tone outut from each seaker to the outut from the left front (or left surround) seaker so that the volume level for all seakers is identical. B)SPEAKER LEVEL - +. FR C SL PREPARATION 5 sk Front L/R, Center, Surround L/R 8 After you have finished the settings, ress reeatedly to select SET CANCEL. Use / to select SET or CANCEL, then ress ENTER. SET To aly the changes and start the test tone. CANCEL To cancel the changes and return to SET MENU. Notes L C R SL SB SR Use the test tone to check the seaker levels. If you selected SET, the dislay changes to: ; BASIC SETUP ROOM : )S M L SWFR : )YES NONE SPEAKERS;;;;5sk. CHECK: Test Tone and the unit oututs a test tone from each seaker in turn. When the test tone begins, the dislay changes to: ; BASIC SETUP ROOM : )S M L SWFR : )YES NONE SPEAKERS;;;;5sk. CHECK OK?;;;;YES The unit cycles the test tone around each of the seakers in turn twice. The indicator of the seaker currently oututting the test tone flashes in the front anel dislay. B)SPEAKER LEVEL - +. SR SWFR Press / to select a seaker and adjust the balance using /. The unit oututs the test tone from the selected seaker and the left front (or left surround) seaker in turn. The indicator of the seaker currently oututting the test tone flashes in the front anel dislay. FR adjusts the balance between the front left and right seakers. C adjusts the balance between the front left and center seakers. SL adjusts the balance between the front left and surround left seakers. SR adjusts the balance between the surround left and surround right seakers. SWFR adjusts the balance between the front left seaker and the subwoofer. y You can also make test tone setting adjustments by ressing TEST on the remote control. Memory back-u The memory back-u circuit revents the stored data from being lost even if this unit is in the standby mode. However, if the ower cord is disconnected from the AC outlet, or the ower suly is cut for more than one week, the stored data will be lost. If so, adjust the items again. 17

22 STANDBY /ON SILENT CINEMA VIDEO L AUDIO R PHONES VIDEO 2 OPTICAL TUNER AUTO/MAN'L DSP INPUT PUSH-ENTER /SELECT PLAYBACK PLAYBACK Basic oerations 1 3 3,5 3 Press INPUT, then rotate /SELECT within 5 seconds to select the inut source (or ress an inut selector button on the remote control). /SELECT INPUT or 1 STANDBY/ON STEREO 1 HALL 2 JAZZ 3 SLEEP ROCK 4 b TITLE LEVEL a MENU SET MENU CH ENTER CH + Front anel or MUSIC 5 STANDARD 9 TV ENTERTAIN 6 NIGHT 0 AV TV THTR 7 EXTD SUR. +10 MOVIE 8 CODE SET REC FREQ/RDS EON STRAIGHT ENT EFFECT RETURN TEST/ RETURN TV VOL MUTE AMP DISPLAY 5 DVD/CD VCR VIDEO 1 DTV/CBL TUNER VIDEO 2 DISC SKIP w A/B/C/D/E b s AUDIO MODE PTY SEEK START e d PRESET f u a DVD/CD VCR VIDEO 1 DTV/CBL TUNER VIDEO 2 MUTE INPUT + 3 Remote control TITLE LEVEL CH ENTER MENU SET MENU CH + TV MODE CH The current inut source name and inut mode aear in the front anel dislay for a few seconds. 1 Press STANDBY/ON to turn on the ower. VCR VIDEO 1 VIDEO 2 DTV/CBL DVD/CD TUNER L R STANDBY/ON STANDBY /ON or Selected inut source Inut mode Front anel Remote control Note 2 Turn on the video monitor connected to this unit. If no oeration is erformed within 5 seconds of ressing INPUT or /SELECT is ressed on the front anel, the function of /SELECT switches back to volume level adjustment. If this haens, aears in the front anel dislay for a few seconds. 4 Start layback or select a broadcast station on the source comonent. Refer to the oeration instructions for the comonent. 5 Adjust the volume to the desired outut level. /SELECT or Front anel Remote control 18

23 PLAYBACK To listen with headhones (SILENT CINEMA) The SILENT CINEMA mode allows you to enjoy multichannel music or movie sound, including Dolby Digital and DTS surround, through ordinary headhones. SILENT CINEMA activates automatically whenever you connect headhones to the PHONES jack while listening to DSP sound field rograms. The SILENT CINEMA indicator lights u in the front anel dislay. SILENT CINEMA is not effective when the Direct Stereo or 2ch Stereo rogram is selected, or in STRAIGHT mode. Playing video sources in the background You can combine a video image from a video source with sound from an audio source. For examle, you can enjoy listening to classical music while viewing beautiful scenery from the video source on the video monitor. Use the inut selector buttons on the remote control to select a video source, then select an audio source. To adjust the tone You can adjust the tonal quality /SELECT of your front left and right seakers or headhones (when connected). Press /SELECT on the front anel reeatedly to select TREBLE or BASS, then rotate to the right or left to increase or /SELECT decrease. Select TREBLE to adjust the high frequency resonse. Select BASS to adjust the low frequency resonse. Front anel To cancel the tone control setting, ress /SELECT again, or ress +/ on the remote control or oerate nothing for 5 seconds. y Seaker and headhone adjustments are stored indeendently. DVD/CD VCR VIDEO 1 DTV/CBL TUNER VIDEO 2 Remote control Video sources Audio source BASIC OPERATION Notes If you increase or decrease the high-frequency or low-frequency sound to an extreme level, the tonal quality of the surround seakers may not match that of the front left and right seakers. TONE CONTROL is not effective with the Direct Stereo rogram (age 32). To mute the sound Press MUTE on the remote control. MUTE MUTE blinks in the front anel dislay. To resume the audio outut, ress Remote control MUTE again (or ress +/ ). MUTE disaears from the dislay. y You can adjust the muting level (see age 41). 19

24 STANDBY /ON SILENT CINEMA VIDEO L AUDIO R PHONES VIDEO 2 OPTICAL TUNER AUTO/MAN'L DSP INPUT PUSH-ENTER /SELECT PLAYBACK Selecting sound field rograms Remote control oeration Front anel oeration /SELECT b a STANDBY/ON SLEEP TITLE MENU Sound field rogram buttons STEREO 1 MUSIC 5 STANDARD 9 TV HALL 2 ENTERTAIN 6 AV JAZZ 3 TV THTR 7 ROCK 4 MOVIE 8 CODE SET REC FREQ/RDS EON w NIGHT 0 EXTD SUR. s AUDIO PTY SEEK DISC SKIP MODE START e +10 STRAIGHT ENT EFFECT f LEVEL CH RETURN TEST/ RETURN TV VOL ENTER MUTE AMP SET MENU CH + DISPLAY DVD/CD VCR VIDEO 1 DTV/CBL TUNER VIDEO 2 AMP DSP Press DSP, then rotate /SELECT within 5 seconds. The name of the selected rogram aears in the front anel dislay. A/B/C/D/E d PRESET u b TITLE LEVEL a MENU SET MENU MUTE INPUT TV MODE CH + DSP /SELECT CH ENTER CH + Press AMP to select the AMP mode, then ress one of the sound field rogram buttons reeatedly to select the desired rogram. The name of the selected rogram aears in the front anel dislay. Program name VCR VIDEO 1 VIDEO 2 DTV/CBL DVD/CD TUNER HiFi DSP L R AMP STEREO 1 HALL 2 JAZZ 3 MUSIC ENTERTAIN TV THTR STANDARD 9 Program name VCR VIDEO 1 VIDEO 2 DTV/CBL DVD/CD TUNER HiFi DSP ROCK 4 MOVIE 8 L R y Choose a sound field rogram based on your listening reference, and not on the name of the rogram. Notes If no oeration is erformed within 5 seconds of ressing DSP on the front anel, the function of /SELECT switches back to volume. After selecting a DSP rogram, ress /SELECT to switch the function of /SELECT back to volume. There are 9 rograms with sub-rograms available with this unit. However, the selection deends on the inut signal format and not all sub-rograms can be used with all inut signal formats. The acoustics of your listening room affect the sound field rogram. Minimize the sound reflections in your room to maximize the effect created by the rogram. When you select an inut source, this unit automatically selects the last sound field rogram used with that source. When you set this unit in standby mode, it stores the current source and sound field rogram in memory and automatically selects them when you turn on the ower again. If the unit receives a Dolby Digital or DTS signal when the inut mode is set to AUTO, the CINEMA DSP sound field rograms automatically switches to the aroriate decoding rogram. When the unit is reroducing a monaural source with PRO LOGIC, PRO LOGIC Enhanced, PRO LOGIC II Game or PRO LOGIC II Movie, no sound is outut from the front and surround seakers. Sound can only be heard from the center seaker. (If CENTER SP in SPEAKER SET in the SOUND menu is set to None, the center channel sound is outut from the front seakers.) Samling frequencies higher than 48 khz (excet for DTS 96/ 24 signals) will be samled down to 48 khz, then sound field rograms will be alied. 20

25 PLAYBACK Night listening modes The night listening modes are designed to imrove listenability at lower volumes or at night. Choose either NIGHT:CINEMA or NIGHT:MUSIC deending on the tye of material you are laying. Press NIGHT on the remote control reeatedly to select cinema or music. When night listening is selected, the NIGHT indicator in the front anel dislay lights u. Downmixing to 2 channels You can enjoy 2-channel stereo layback even from multichannel sources. Press DSP, then rotate /SELECT (or ress STEREO on the remote control) to select 2ch Stereo. DSP NIGHT 0 or STEREO 1 Remote control Select NIGHT:CINEMA when watching films to reduce the dynamic range of film soundtracks and make dialog easier to hear at lower volumes. Select NIGHT:MUSIC when listening to music sources to reserve ease-of-listening for all sounds. Select OFF if you do not want to use this function. /SELECT Front anel Remote control Press / to adjust the effect level while NIGHT:CINEMA or NIGHT:MUSIC is dislayed. This adjusts the level of comression. ENTER Remote control Effect.Lvl:MID 2ch Stereo y You can use a subwoofer with this rogram when SWFR or BOTH is selected in BASS OUT. You can enjoy ure high fidelity sound from 2-channel sources when Direct Stereo is selected (see age 32). Listening to unrocessed inut signals In STRAIGHT mode, two channel stereo sources are outut from only the front left and right seakers. Multichannel sources are decoded straight into the aroriate channels without any additional effect rocessing. Press STRAIGHT/EFFECT to select STRAIGHT. BASIC OPERATION Select MIN for minimum comression. Select MID for standard comression. Select MAX for maximum comression. y NIGHT:CINEMA and NIGHT:MUSIC adjustments are stored indeendently. Notes You cannot use the night listening modes with the Direct Stereo rogram (even though the NIGHT indicator lights u when Direct Stereo is selected). The night listening modes may vary in effectiveness deending on the inut source and surround sound settings you use. STRAIGHT ENT EFFECT Remote control STRAIGHT Press STRAIGHT/EFFECT again so that STRAIGHT disaears from the dislay when you want to turn the sound effect back on. 21