UBTK YSP-1. Digital Sound Projector OWNER'S MANUAL

Transcription

1 UBTK YSP-1 Digital Sound Projector OWNER'S MANUAL

2 IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. * Exlanation of Grahical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the resence of uninsulated dangerous voltage within the roduct s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to ersons. The exclamation oint within an equilateral triangle is intended to alert you to the resence of imortant oerating and maintenance (servicing) instructions in the literature accomanying the aliance. 1 Read these instructions. 2 Kee these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this aaratus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation oenings. Install in accordance with the manufacturer s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other aaratus (including amlifiers) that roduce heat. 9 Do not defeat the safety urose of the olarized or grounding-tye lug. A olarized lug has two blades with one wider than the other. A grounding tye lug has two blades and a third grounding rong. The wide blade or the third rong are rovided for your safety. If the rovided lug does not fit into your outlet, consult an electrician for relacement of the obsolete outlet. 10 Protect the ower cable from being walked on or inched articularly at lugs, convenience recetacles, and the oint where they exit from the aaratus. 11 Only use attachments/accessories secified by the manufacturer. 12 Use only with the cart, stand, triod, bracket, or table secified by the manufacturer, or sold with the aaratus. When a cart is used, use caution when moving the cart/aaratus combination to avoid injury from ti-over. 13 Unlug this aaratus during lightning storms or when unused for long eriods of time. 14 Refer all servicing to qualified service ersonnel. Servicing is required when the aaratus has been damaged in any way, such as ower-suly cord or lug is damaged, liquid has been silled or objects have fallen into the aaratus, the aaratus has been exosed to rain or moisture, does not oerate normally, or has been droed. i CAUTION

3 IMPORTANT SAFETY INSTRUCTIONS FCC INFORMATION (for US customers) 1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This roduct, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not exressly aroved by Yamaha may void your authority, granted by the FCC, to use the roduct. 2. IMPORTANT : When connecting this roduct to accessories and/or another roduct use only high quality shielded cables. Cable/s sulied with this roduct MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this roduct in the USA. 3. NOTE : This roduct has been tested and found to comly with the requirements listed in FCC Regulations, Part 15 for Class B digital devices. Comliance with these requirements rovides a reasonable level of assurance that your use of this roduct in a residential environment will not result in harmful interference with other electronic devices. This equiment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the oeration of other electronic devices. Comliance with FCC regulations does not guarantee that interference will not occur in all installations. If this roduct is found to be the source of interference, which can be determined by turning the unit OFF and ON, lease try to eliminate the roblem by using one of the following measures: Relocate either this roduct or the device that is being affected by the interference. Utilize ower outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial tye cable. If these corrective measures do not roduce satisfactory results, lease contact the local retailer authorized to distribute this tye of roduct. If you can not locate the aroriate retailer, lease contact Yamaha Electronics Cor., U.S.A Orangethore Ave, Buena Park, CA The above statements aly ONLY to those roducts distributed by Yamaha Cororation of America or its subsidiaries. We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association s Consumer Electronics Grou want you to get the most out of your equiment by laying it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion and, most imortantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association s Consumer Electronics Grou recommend you to avoid rolonged exosure from excessive volume levels. CAUTION ii

4 CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest erformance, lease read this manual carefully. Kee it in a safe lace for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean lace with at least 5 cm of sace above (or below) YSP-1 away from direct sunlight, heat sources, vibration, dust, moisture, and/ or cold. 3 Locate this unit away from other electrical aliances, motors, or transformers to avoid humming sounds. 4 Do not exose this unit to sudden temerature changes from cold to hot, and do not locate this unit in an environment with high humidity (i.e. a room with a humidifier) to revent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or ersonal injury. 5 Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exosed to liquid driing or slashing. On the to of this unit, do not lace: Other comonents, as they may cause damage and/or discoloration on the surface of this unit. Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or ersonal injury. Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit. 6 Do not cover this unit with a newsaer, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temerature inside this unit rises, it may cause fire, damage to this unit, and/or ersonal injury. 7 Do not lug in this unit to a wall outlet until all connections are comlete. 8 Do not oerate this unit uside-down. It may overheat, ossibly causing damage. 9 Do not use force on switches, knobs and/or cords. 10 When disconnecting the ower cable from the wall outlet, gras the lug; do not ull the cable. 11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 12 Only voltage secified on this unit must be used. Using this unit with a higher voltage than secified is dangerous and may cause fire, damage to this unit, and/or ersonal injury. YAMAHA will not be held resonsible for any damage resulting from use of this unit with a voltage other than secified. 13 To revent damage by lightning, disconnect the ower cable from the wall outlet during an electrical storm. 14 Do not attemt to modify or fix this unit. Contact qualified YAMAHA service ersonnel when any service is needed. The cabinet should never be oened for any reasons. 15 When not lanning to use this unit for long eriods of time (i.e. vacation), disconnect the AC ower lug from the wall outlet. 16 Be sure to read the TROUBLESHOOTING section on common oerating errors before concluding that this unit is faulty. 17 Before moving this unit, ress STANDBY/ON to set this unit in standby mode, and disconnect the AC ower lug from the wall outlet. 18 Condensation will form when the surrounding temerature changes suddenly. Disconnect the ower cable from the outlet, then leave the unit alone. 19 When using the unit for a long time, the unit may become warm. Turn the ower off, then leave the unit alone for cooling. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This unit is not disconnected from the AC ower source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of ower. FOR CANADIAN CUSTOMERS To revent electric shock, match wide blade of lug to wide slot and fully insert. This Class B digital aaratus comlies with Canadian ICES-003. IMPORTANT Please record the serial number of this unit in the sace below. MODEL: Serial No.: The serial number is located on the rear or the bottom of this unit. Retain this Owner s Manual in a safe lace for future reference. For U.K. customers If the socket outlets in the home are not suitable for the lug sulied with this aliance, it should be cut off and an aroriate 3 in lug fitted. For details, refer to the instructions described below. Note The lug severed from the mains lead must be destroyed, as a lug with bared flexible cord is hazardous if engaged in a live socket outlet. Secial instructions for U.K. model IMPORTANT THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: Blue: NEUTRAL Brown: LIVE As the colours of the wires in the mains lead of this aaratus may not corresond with the coloured markings identifying the terminals in your lug, roceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three in lug. iii CAUTION

5 CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. CAUTION Danger of exlosion if battery is incorrectly relaced. Relace only with the same or equivalent tye. CAUTION Use of controls or adjustments or erformance of rocedures other than those secified herein may result in hazardous radiation exosure. CAUTION iv

6 HOW TO USE THIS MANUAL Check that you have received all of the sulied accessories. (See Sulied accessories on age 4.) Install this unit in your listening room. (See INSTALLING THIS UNIT IN YOUR LISTENING ROOM on age 9.) Connect this unit to your TV and other external comonents. (See CONNECTIONS on age 11.) Preare the remote control and turn on this unit. (See PREPARING THE REMOTE CONTROL on age 18 and BASIC OPERATION on age 19.) Follow the stes to enjoying surround sound or make EASY SETUP settings. (See STEPS TO ENJOYING SURROUND SOUND on age 20 or EASY SETUP on age 24.) Play back a source and adjust the beam mode settings. (See PLAYBACK on age 31 and ADJUSTING BEAM MODE SETTINGS on age 34.) To make additional settings and adjustments: Make MANUAL SETUP settings and set remote control codes. (See MANUAL SETUP on age 36 and REMOTE CONTROL FEATURES on age 51.) v

7 CONTENTS INTRODUCTION OVERVIEW... 2 Selecting a listening room... 4 About this manual... 4 Sulied accessories... 4 CONTROLS AND FUNCTIONS... 5 Front anel... 5 Front anel dislay... 6 Bottom anel... 7 Remote control... 8 PREPARATION INSTALLING THIS UNIT IN YOUR LISTENING ROOM... 9 Choosing an installation location... 9 Using a metal wall bracket Using a stand Using a rack Affixing this unit CONNECTIONS Connecting a TV Connecting a DVD layer/recorder Connecting a VCR Connecting other external comonents Connecting a subwoofer Connecting the ower suly cable About the RS-232C terminal BASIC OPERATION PREPARING THE REMOTE CONTROL Installing batteries in the remote control BASIC OPERATION Using the remote control Turning the ower on/to standby mode STEPS TO ENJOYING SURROUND SOUND Dislaying the on-screen dislay (OSD) Selecting a reset listening environment Enjoying TV in surround sound EASY SETUP Using EASY SETUP VOLUME CONTROLS Adjusting the volume Muting the sound PLAYBACK Selecting an inut source Playing back sources SELECTING A SURROUND MODE Playback sources and their available surround modes Enjoying 2-channel sources with multi channels Surround mode arameters ADDITIONAL PLAYBACK MODES Night listening modes ADJUSTING BEAM MODE SETTINGS Stereo mode beam mode beam mode ST(STEREO)+3 beam mode ADVANCED OPERATION MANUAL SETUP...36 Using SET MENU SOUND MENU BEAM MENU INPUT MENU OPTION MENU SELECTING AN INPUT MODE...47 MANUALLY ADJUSTING OUTPUT LEVELS...48 Using the test tone Adjusting outut levels during layback USING THE SLEEP TIMER...50 ADDITIONAL INFORMATION REMOTE CONTROL FEATURES...51 Setting remote control codes Controlling other comonents TROUBLESHOOTING...54 RESETTING THE FACTORY PRESETS...57 FRONT PANEL DISPLAY ITEMS...58 GLOSSARY...59 Audio formats Audio information INDEX...60 SPECIFICATIONS...61 INTRODUCTION PREPARATION BASIC OPERATION ADVANCED OPERATION ADDITIONAL INFORMATION 1

8 OVERVIEW OVERVIEW It is generally acceted that in order to fully enjoy the benefits of surround sound at home, you must endure the agony of wiring and installing a great number of seakers in the hoe that your listening room will give you the same kind of surround sound exerience as your local movie theater. YAMAHA s YSP-1 Digital Sound Projector challenges this reconcetion that comlicated seaker set u and troublesome wiring go hand-in-hand with the enjoyment of multi-channel surround sound. Sound Beam Diagram C L R Listening Position SL SR Imaginary front seaker osition Imaginary surround seaker osition 2

9 OVERVIEW This slimline unit does away with the need for comlicated wiring and installation worries, leaving you with a unit that is not only easy to set u, but which is also caable of reroducing the kind of owerful surround sound you have been waiting for from its built-in subwoofers (2) and individual seakers (40). You can use this unit s arameters to fine tune the delay time for searate sound beams, resulting in highly directional sound that comes in on the listening osition from all directions. The YSP-1 rojects sound beams containing surround sound information for the front right (R), front left (L), surround right (SR) and surround left (SL) seaker ositions, which are reflected off the walls of your listening room before reaching the actual listening osition. With the addition of center (C) sound beams, this Digital Sound Projector creates true-to-life 5.1 channel surround sound that makes you feel as if there are actual seakers around the room. Further, you can change the way in which these beams are rojected at your walls (the beam mode) to match the contents of the rogram you are watching or your listening environment, giving you a virtual surround sound exerience for both stereo and 5.1-channel layback. INTRODUCTION This unit s SET MENU can be dislayed on your TV screen, allowing you to customize this unit to suit your listening environment. Set u is straight forward using the MEMORY or EASY SETUP menus. MEMORY allows you to load reset listening environment arameters for quick setu. EASY SETUP is an easy-to-follow setu method for first-time users. In addition, the MANUAL SETUP menu offers advanced arameters for the surround sound enthusiast who wants to make individual adjustments for each seaker osition. This highly-advanced rojector suorts a wide range of sound technology, including Dolby Digital, a basic audio format for DVDs, Dolby Pro Logic for the reroduction of true-to-life sound, and DTS for layback of the best ossible sound clarity. Equied with two otical digital, one coaxial digital and two analog inut jacks, the YSP-1 allows you to exand your system through the direct connection of external comonents, such as a DVD layer. Sit back and enjoy the real sound exerience of this simle, yet stylish Digital Sound Projector. 3

10 1 5 9 CH NIGHT CH LEVEL TEST TV VOL POWER MUTE TV MUTE CODE SET MENU RETURN VOLUME TV INPUT TV DVD SLEEP SURROUND SELECT AUX BEAM MODE SET MENU VCR OVERVIEW Selecting a listening room This unit creates surround sound by reflecting rojected sound beams off the walls of your listening room. The surround sound effects roduced by this unit may not be sufficient when the unit is installed in the following locations: Rooms with surfaces inadequate for reflecting sound beams Rooms with acoustically absorbent surfaces Rooms with measurements outside the range: (3 to 7 m) (2 to 3.5 m) (3 to 7 m) (W H D) Rooms with less than 2 m from the listening osition to the seaker ositions Rooms where objects such as furniture are likely to obstruct the ath of sound beams About this manual This manual describes how to connect and oerate the YSP-1. For details regarding the oeration of external comonents, refer to the sulied owner s manual for the comonent. Some oerations can be erformed by using either the buttons on the main unit or on the remote control. In such cases, the oeration is described using remote control oeration. y indicates a ti for your oeration. This manual is rinted rior to roduction. Design and secifications are subject to change in art as a result of imrovements, etc. In case of differences between the manual and roduct, the roduct has riority. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-d symbol are trademarks of Dolby Laboratories. Manufactured under license from 1 Ltd. world-wide atents alied for. The logo and Digital Sound Projector are trademarks of 1 Ltd. DTS, and Neo:6 are trademarks of Digital Theater Systems, Inc. Sulied accessories Please check that you received all of the following arts. Remote control ( 1) Batteries ( 2) (AA, R6, UM-3) OSD Video Cable ( 1) Otical Cable ( 1) STANDBY/ON AV Cable Holder ( 1) Digital Audio Pin Cable ( 1) Power Cable ( 1) Fastener ( 4) Audio Pin Cable ( 1) 4

11 CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS Front anel INTRODUCTION 1 2 INPUT VOLUME + STANDBY/ON Front anel dislay Shows information about the oerational status of this unit. 2 Remote control sensor Receives signals from the remote control. 3 INPUT Switches between the connected external audio sources. 4 VOLUME /+ Controls the outut level of all audio channels (see age 30). 5 STANDBY/ON Turns on this unit or sets it in the standby mode (see age 19). When you turn on this unit, you will hear a click and there will be a 4 to 5-second delay before it can reroduce sound. Note In standby mode, this unit consumes a small amount of ower in order to receive infrared-signals from the remote control. 5

12 CONTROLS AND FUNCTIONS Front anel dislay NIGHT SLEEP PCM DIGITAL PL VOL m ft ms db 5 1 NIGHT indicator Lights u when you select a night listening mode (see age 33). 2 SLEEP indicator Lights u while the slee timer is on (see age 50). 3 Decoder indicators When any of this unit s decoders function, the resective indicator lights u. 4 Volume level indication Indicates the current volume level (see age 30). 5 Multi-information dislay Shows information when adjusting or changing settings. 6

13 CONTROLS AND FUNCTIONS Bottom anel SYSTEM CONNECTOR RS-232C DIGITAL INPUT AUDIO INPUT DVD AUX TV VIDEO SUBWOOFER TV VCR COAXIAL OPTICAL OUT OUT R L R L INTRODUCTION SYSTEM CONNECTOR jack Use to connect a YAMAHA subwoofer equied with a SYSTEM CONNECTOR jack to this unit (see age 16). 2 RS-232C terminal This is a control exansion terminal for commercial use only (see age 17). 3 DVD coaxial digital inut jack Use to connect a DVD layer using a coaxial digital connection (see age 13). 4 AUX otical digital inut jack Use to connect an external comonent using an otical digital connection (see age 15). 5 TV otical digital inut jack Use to connect a TV using an otical digital connection (see age 12). 6 VIDEO OUT jack Connect to your TV s video inut terminal to dislay this unit s OSD (see age 12). 7 SUBWOOFER OUT jack Use to connect a subwoofer (see age 16). 8 TV analog audio inut jacks Use to make an analog connection to your TV (see age 12). 9 VCR analog audio inut jacks Use to make an analog connection to your VCR (see age 14). 0 AC IN Connect the sulied ower cable (see age 17). 7

14 CONTROLS AND FUNCTIONS Remote control This section describes the function of each control on the remote control used to control this system. To oerate other comonents, see Controlling other comonents on age STANDBY/ON CH NIGHT CH LEVEL TEST TV VOL POWER AV MUTE TV MUTE CODE SET MENU RETURN VOLUME TV INPUT TV DVD SLEEP SURROUND SELECT AUX BEAM MODE SET MENU VCR A B C D E 1 Infrared window Oututs infrared control signals. Aim this window at the comonent you want to oerate. 2 STANDBY/ON Sets this system in the standby mode (see age 19). 3 Numeric buttons Use to enter numbers. 4 NIGHT Turns on or off the night listening modes (see age 33). 5 SURROUND Selects the surround mode for layback (see age 32). 6 Cursor buttons / / / SELECT Use to select and adjust SET MENU items. 7 TEST Oututs a test tone when adjusting the seaker levels (see age 48). 8 MUTE Mutes the sound (see age 30). Press again to restore the audio outut to the revious volume level. 9 SLEEP Sets the slee timer (see age 50). 0 Beam mode buttons Change the beam mode settings (see age 34). A CODE SET Use to set u remote control codes (see age 51). B SET MENU Dislays the SET MENU on your TV or monitor (see age 24). C RETURN Use to select slee timer settings (see age 50) or return to the revious SET MENU screen (see age 24). D VOLUME +/ Increases or decreases this system s volume level (see age 30). E Inut selector buttons Use to select a layback source and change the control area (see age 31). 8

15 INSTALLING THIS UNIT IN YOUR LISTENING ROOM This section describes how to choose a suitable installation location for this unit, and how to install the unit using either a metal wall bracket, rack or stand. Note INSTALLING THIS UNIT IN YOUR LISTENING ROOM If objects such as furniture are obstructing the ath of sound beams, the desired surround sound effects may not be achieved. Make sure you install this unit where there are no objects in the ath of sound beams. Notes on installation When installing this unit, be sure to leave an adequate amount of ventilation sace so that heat can escae. Make sure you leave at least 5 cm of sace above (or below) this unit (as shown in the illustration on the right). We do not recommend installing this unit so that it is ositioned directly on the floor of your listening room. Please install this unit using a metal wall bracket, rack or stand. This unit weighs 13 kg (28lbs). Be sure to install this unit where it will not fall if subject to vibrations, such as from an earthquake, and where it is out of the reach of children. When using a cathode-ray tube (CRT) TV, do not install this unit directly above your TV. This unit is shielded against magnetic rays. However, if the icture on your TV screen becomes blurred or distorted, we recommend moving the seakers away from your TV. Front 5 cm or more Rear PREPARATION Choosing an installation location To exerience the best surround sound this unit can deliver, make sure you install this unit in a location where objects, such as furniture, are not in the direct ath of the sound beams (see the illustration below). When installing this unit arallel to the wall, try lacing it so that it is in the exact center of the wall (measured from the left and right corners). When installing this unit in the corner of your listening room, make sure the seakers are laced between 40º to 50º from the adjacent walls. An object, such as furniture 40 to 50 9

16 INSTALLING THIS UNIT IN YOUR LISTENING ROOM Using a metal wall bracket You can use the otional metal wall bracket to mount this system on your listening room wall. For details on how to attach the metal bracket to the wall or how to attach this system to the metal bracket, refer to the instructions sulied with the bracket. Metal wall bracket Using a rack You can install this system either above or under your TV in a commercially available rack. Before installing, make sure that the rack is large enough to allow adequate ventilation sace around this unit, and that it is strong enough to suort the weight of both this unit and your TV. When the YSP-1 is installed above your TV YSP-1 TV TV Using a stand You can mount your TV on the stand laced on a commercially available rack to install this unit under your TV. For details on how to attach the stand or how to attach this system to your TV, refer to the instructions sulied with the stand. TV YSP-1 Stand Affixing this unit To affix this unit, remove the rotection ads from the bottom of the unit, then secure the sulied fasteners (4 ieces) to the bottom four corners of this unit and the to of the rack, etc. as shown below. Notes When the YSP-1 is installed under your TV Do not install this unit on to of a slanted surface. This unit may fall over and cause injury. Make sure you wie the surface of the rack, etc. before securing the fasteners. Aling the tae to a dirty or wet surface will weaken the sticking ower of the tae, and this unit may fall as a result. YSP-1 Remove the rotection ads Peel off the film Fasteners 10

17 CONNECTIONS CONNECTIONS This unit is equied with two otical digital jacks, one coaxial digital jack and two tyes of analog jacks for connecting external comonents such as your TV, DVD layer, VCR and game console. Further, by connecting a subwoofer to this unit, you can enjoy reinforced low bass sounds. For details on how to connect the various tyes of external comonents to this unit, see ages 12 to 17. CAUTION Do not connect this unit or other comonents to the mains ower until all connections between comonents are comlete. Audio connection Video connection TV PREPARATION YSP-1 DVD layer Subwoofer VCR Digital satellite tuner, cable TV or game console 11

18 CONNECTIONS Connecting a TV You can connect a TV to this unit and dislay the OSD for easy viewing (see age 20) when oerating SET MENU (see age 24). When connecting the Otical Cable, use the Cable Holder at the rear anel of the YSP-1 to fix the cable (see age 15). Cables used for connections For digital connections Audio Pin Cable (sulied) For video (OSD) connections OSD Video Cable (sulied) (White) (White) (Red) (Red) Otical Cable (sulied) Digital and analog connections Video (OSD) connections SYSTEM CONNECTOR YSP-1 (Bottom anel) DIGITAL INPUT AUDIO INPUT DVD AUX TV VIDEO SUBWOOFER TV VCR RS-232C COAXIAL OPTICAL OUT OUT R L R L SYSTEM CONNECTOR RS-232C YSP-1 (Bottom anel) DIGITAL INPUT AUDIO INPUT DVD AUX TV VIDEO SUBWOOFER TV VCR COAXIAL OPTICAL OUT OUT R L R L Analog audio Otical digital outut outut R L Video inut TV TV 12

19 CONNECTIONS Connecting a DVD layer/recorder To connect a DVD layer/recorder, connect the coaxial digital outut jack on your DVD layer to the coaxial digital inut jack (DVD COAXIAL) on this unit. If there is no coaxial digital outut jack on your DVD layer/recorder, use them with otical digital connection. Cables used for connections Digital Audio Pin Cable (sulied) SYSTEM CONNECTOR RS-232C YSP-1 (Bottom anel) DIGITAL INPUT AUDIO INPUT DVD AUX TV VIDEO SUBWOOFER TV VCR COAXIAL OPTICAL OUT OUT R L R L PREPARATION Coaxial digital outut Video signal to a TV DVD layer/recorder 13

20 CONNECTIONS Connecting a VCR To connect a VCR, connect the analog audio outut jack on your VCR to the analog audio inut jack (VCR R/L) on this unit. Connect red lugs to the right jacks and white lugs to the left jacks. Cables used for connections Audio Pin Cable (White) (White) (Red) (Red) SYSTEM CONNECTOR RS-232C YSP-1 (Bottom anel) DIGITAL INPUT AUDIO INPUT DVD AUX TV VIDEO SUBWOOFER TV VCR COAXIAL OPTICAL OUT OUT R L R L (Red) (White) (Red) (White) Analog audio outut R L Video signal to a TV VCR 14

21 CONNECTIONS Connecting other external comonents To connect other external comonents, connect the otical digital outut jack on the comonent to the otical digital inut jack (AUX OPTICAL) on this unit. You can connect a DVD layer/recorder or a comonent that suorts otical digital connections. Cables used for connections Otical Cable SYSTEM CONNECTOR RS-232C YSP-1 (Bottom anel) DIGITAL INPUT AUDIO INPUT DVD AUX TV VIDEO SUBWOOFER TV VCR COAXIAL OPTICAL OUT OUT R L R L PREPARATION To revent cables from becoming unlugged, lace the cable holder rovided oen side u, and attach it to the rear anel of this unit in a suitable osition. Affix the cable(s) in the holder. Otical fiber cable Attach to the YSP-1 Otical digital outut Video signal to a TV Digital satellite tuner, cable TV or game console 15

22 CONNECTIONS Connecting a subwoofer To connect a subwoofer, connect the monaural inut jack on your subwoofer to the monaural audio outut jack (SUBWOOFER OUT) on this unit. When connecting a YAMAHA subwoofer equied with a SYSTEM CONNECTOR jack, connect it to the SYSTEM CONNECTOR jack on this unit. If the subwoofer is connected using a system tye connection, changing the ower mode of this unit controls the ower mode of the subwoofer. To adjust the settings for your subwoofer, see SUBWOOFER SET in MANUAL SETUP (age 38). Cables used for connections Subwoofer in cable SYSTEM CONNECTOR RS-232C YSP-1 (Bottom anel) DIGITAL INPUT AUDIO INPUT DVD AUX TV VIDEO SUBWOOFER TV VCR COAXIAL OPTICAL OUT OUT R L R L System Monaural connector inut Subwoofer 16

23 CONNECTIONS Connecting the ower suly cable Connecting the AC ower cable Once all other connections are comlete, lug one end of the ower cable into the AC IN terminal on this unit, then lug the other end into an AC wall outlet. To an AC outlet PREPARATION About the RS-232C terminal The RS-232C terminal on the bottom anel of this unit does not suort normal external comonent connection. This is a control exansion terminal for commercial use only. SYSTEM CONNECTOR RS-232C YSP-1 (Bottom anel) DIGITAL INPUT AUDIO INPUT DVD AUX TV VIDEO SUBWOOFER TV VCR COAXIAL OPTICAL OUT OUT R L R L RS-232C terminal 17

24 PREPARING THE REMOTE CONTROL PREPARING THE REMOTE CONTROL Installing batteries in the remote control Press % 1 Press the mark on the battery cover and slide off the cover. 2 Insert the two sulied batteries (AA, R06, UM-3) into the battery comartment. Make sure you insert the batteries according to the olarity markings (+/ ). Notes on batteries Change all of the batteries if you notice the following conditions; the oeration range of the remote control decreases, the indicator does not blink or its light becomes dim. Do not use old batteries together with new ones. Do not use different tyes of batteries (such as alkaline and manganese batteries) together. Read the ackaging carefully as these different tyes of batteries may have the same shae and color. If the batteries have leaked, disose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery comartment thoroughly before installing new batteries. If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries and reset the remote control codes. When changing the batteries, be careful not to ress any of the buttons on the remote control. Doing so will clear the contents of the memory. 3 Close the battery cover. 18

25 BASIC OPERATION BASIC OPERATION Using the remote control The remote control transmits a directional infrared beam. Use the remote control within 6 m (20 feet) of this unit and oint it toward the remote control sensor on the main unit during oeration. Turning the ower on/to standby mode Aroximately 6 m (20 ft) INPUT VOLUME + STANDBY/ON Handling the remote control Do not sill water or other liquids on the remote control. Do not dro the remote control. Do not leave or store the remote control in the following tyes of conditions: laces of high humidity, such as near a bath high temeratures, such as near a heater or stove extremely low temeratures dusty laces Do not exose the remote control sensor on the main unit to direct sunlight or lighting (inverted fluorescent lams). If the batteries grow old, the effective oeration distance of the remote control decreases considerably. If this haens, relace the batteries with two new ones as soon as ossible. Press STANDBY/ON on the front anel or the remote control to turn this unit s ower on/to standby mode. This unit s ower switches between on and standby mode each time STANDBY/ON is ressed. STANDBY/ON Front anel STANDBY/ON 1 5 or POWER AV or Remote control BASIC OPERATION 19

26 STEPS TO ENJOYING SURROUND SOUND This section describes very simly how to dislay this unit s OSD on your TV screen and set the arameters for your listening room. Once this is comlete, you can enjoy real surround sound while watching TV in the comfort of your own home. Connect the video inut jack on your TV to the VIDEO OUT jack on this unit to dislay this unit s OSD. 1 Press STANDBY/ON on the remote control. This unit s ower is turned on. 2 Turn on the ower to your TV. STEPS TO ENJOYING SURROUND SOUND Dislaying the on-screen dislay (OSD) 3 Press TV to dislay this unit s OSD on your TV screen. It may take a few seconds before this unit s OSD aears on your TV screen. If the OSD does not aear, use the remote control rovided with your TV to switch the video inut until the OSD aears. TV INPUT TV AUTO:ANALOG OSD screen examle Other buttons that dislay the OSD Remote control buttons that dislay the OSD Page 1 NIGHT 33 2 SURROUND 32 3 CH LEVEL 49 4 Cursor buttons 5 TEST 48 6 MUTE 30 7 SLEEP 50 8 BEAM MODE 34 9 SET MENU 24 0 VOLUME +/ 30 A Inut selector buttons NIGHT CH LEVEL TEST TV VOL SURROUND SELECT MUTE TV MUTE MENU RETURN VOLUME TV INPUT TV DVD SLEEP AUX BEAM MODE SET MENU VCR 9 0 A 20

27 STEPS TO ENJOYING SURROUND SOUND Selecting a reset listening environment For real surround sound, select the reset listening room tye (see below) that best matches your own listening environment. If none of the selections available are suitable for your listening environment, roceed to EASY SETUP (age 24) to make your own listening environment settings. Preset listening room tyes USER1 (Central wall installation in a small room) 4.2m (13.8ft) 1 Press SET MENU. The SET MENU screen aears on your TV. The oeration buttons for SET MENU are dislayed at the bottom of the screen. SET MENU. ;MEMORY ;EASY SETUP ;MANUAL SETUP [ ]/[ ]:U/Down [SELECT]:Enter 2 Press / to select MEMORY, then ress SELECT. The following screen aears on your TV. SET MENU 3.4m (11.2ft) USER2 (Central wall installation in a mediumsized room) SELECT BASIC OPERATION 6.2m (20.3ft) 4.6m (15.1ft) ;MEMORY LOAD SELECT )USER1 USER2 USER3 [<]/[>]:Select [SELECT]:Enter USER3 (Central wall installation in a large room) 7.6m (24.9ft) 3 Press / to select the room tye you want to set u, then ress SELECT. 5.4m (17.7ft) SELECT To resume cursor button oerations after changing the control area by ressing an inut selector button, ress TEST on the remote control. TEST To return to the rvious screen while using SET MENU, ress RETURN on the remote control. RETURN ;MEMORY LOAD SELECT USER1 Load now? [SELECT]:Enter 21

28 STEPS TO ENJOYING SURROUND SOUND 4 Press SELECT once more. The arameters for the selected room tye are loaded. SELECT ;MEMORY Once the arameters are loaded, the dislay returns to the following screen.. ;MEMORY ;EASY SETUP ;MANUAL SETUP [ ]/[ ]:U/Down [SELECT]:Enter SET MENU LOAD SELECT USER1 Loading! [<]/[>]:Select Enjoying TV in surround sound You can enjoy analog audio signals outut by your TV in real surround sound. y Before erforming the stes below, set this unit s volume to 40 db. If necessary, adjust the volume level in ste 4 below. 1 Select the TV channel you want to watch. To select a TV channel, use the remote control rovided with your TV. 2 Press TV on this unit s remote control. This unit oututs audio signals from your TV. TV 5 Press SET MENU. The SET MENU screen disaears from your TV. SET MENU 3 If you can hear sound from your TV seakers, reduce the volume level on your TV until you can no longer hear any audio being outut. To reduce the TV volume level, use the remote control rovided with your TV. 4 To adjust the volume level, ress VOLUME +/ on this unit s remote control. VOLUME 22

29 STEPS TO ENJOYING SURROUND SOUND 5 To select a surround mode, ress SURROUND reeatedly (or ress SURROUND, then ress / ) on this unit s remote control. Signals inut from 2-channel sources are layed back on multile channels. For more information on surround modes, see age 32. SURROUND or SURROUND SELECT To make more detailed listening environment settings, see age 24. To make advanced settings for this unit, see age 36. BASIC OPERATION 23

30 EASY SETUP EASY SETUP If the reset listening environment settings available in Selecting a reset listening environment do not match the characteristics of your listening room, follow the rocedure below to set each listening environment arameter individually using EASY SETUP. ROOM TYPE > SP POSITION (Seaker osition) > ROOM SIZE y For seaker osition, sound beam, digital inut and dislay settings, see MANUAL SETUP (age 36). Items with a checkmark (*) aearing next to them may be dislayed differently on your screen deending on your individual settings Using EASY SETUP NIGHT SURROUND SET MENU ROOM TYPE (Room tye) 2 Check that the following screen is dislayed on your TV. If this screen is not dislayed, ress SET MENU. CH LEVEL MENU SET MENU TEST SELECT RETURN. ;MEMORY ;EASY SETUP ;MANUAL SETUP [ ]/[ ]:U/Down [SELECT]:Enter Dislaying the SET MENU screen on your TV You can dislay the SET MENU screen on your TV for easier viewing. 3 Press / to select EASY SETUP, then ress SELECT. The following screen aears on your TV. 1 Press SET MENU. The SET MENU screen aears on your TV. The oeration buttons for SET MENU are dislayed at the bottom of the screen. SET MENU. ;MEMORY ;EASY SETUP ;MANUAL SETUP [ ]/[ ]:U/Down [SELECT]:Enter y To return to the revious screen while using SET MENU, ress RETURN on the remote control. To resume cursor button oerations after changing the control area by ressing an inut selector button, ress TEST on the remote control. To cancel the SET MENU screen, ress SET MENU once more. You can also erform the following oeration in the front anel dislay. If you ress an inut selector button during SET MENU oeration, the cursor buttons become ineffective. In this casee, ress TEST once. SET MENU SELECT ;EASY SETUP. 1 ROOM TYPE? Push [SELECT] Key. 24

31 EASY SETUP 4 Press SELECT once more. The dislay switches between the SQUARE and RECTANGLE selection screens. SELECT 1 ROOM TYPE? SQUARE [<]/[>]:Select [SELECT]:Enter SP POSITION (Seaker osition) 6 Check that the following screen is dislayed on your TV. If this screen is not dislayed, make the settings in ROOM TYPE (Room tye). ;EASY SETUP LE.E* SQUARE EQ. 2 SP POSITION? LE.E3.E4 Push [SELECT] Key. 1 ROOM TYPE? REC- TANGLE [<]/[>]:Select [SELECT]:Enter 5 Press / to select the desired setting, then ress SELECT. 7 Press SELECT. If you selected SQUARE for ROOM TYPE (Room tye) (age 24), the four SQUARE room tyes are dislayed as shown on age 26 If you selected RECTANGLE, eight different RECTANGLE room tyes are dislayed 2 SP POSITION - CENTER BASIC OPERATION SELECT SELECT SELECT [<]/[>]:Select [SELECT]:Enter Select the shae that best suits your listening room. Select SQUARE if the shae of your listening room is nearest to a square. Select RECTANGLE if the shae of your listening room is nearest to a rectangle. If the shae of your listening room is irregular, select the shae that most closely resembles your room. In Examle 1, the shae that best describes the listening room is RECTANGLE. In Examle 2, it is SQUARE. 2 SP POSITION - WIDE CENTER [<]/[>]:Select [SELECT]:Enter 8 Press / to select the osition tye that best suits the installation location of this unit, then ress SELECT. Examle 1: Rectangular room Examle 2: Square room SELECT SELECT Proceed to ROOM SIZE (Room size). Proceed to SP POSITION (Seaker osition). 25

32 EASY SETUP SQUARE (Square) If you selected SQUARE in ROOM TYPE (Room tye) on age 24: LEFT (Left) CENTER (Center) RIGHT (Right) CORNER (Corner left or right) RECTANGLE (Rectangle) If you selected RECTANGLE in ROOM TYPE (Room tye) on age 24: WIDE LEFT (Wide wall left) WIDE CENTER (Wide wall center) WIDE RIGHT (Wide wall right) CORNER LEFT (Corner left) CORNER RIGHT (Corner right) NARROW LEFT (Narrow wall left) NARROW CENTER (Narrow wall center) NARROW RIGHT (Narrow wall right) 26

33 . EASY SETUP ROOM SIZE (Room size) 9 Check that the following screen is dislayed on your TV. If this screen is not dislayed, make the settings in SP POSITION (Seaker osition). ;EASY SETUP LE.E* SQUARE EQ.>* CENTER LE.E3 ROOM SIZE? LE.E4 Push [SELECT] Key. 11 Press / to select the size that best suits your listening room, then ress SELECT. SELECT Proceed to SETUP OK (Register settings). SELECT 10 Press SELECT. If you selected SQUARE in ROOM TYPE (Room tye) (age 24), SMALL, MID and LARGE are dislayed. If you selected RECTANGLE, SMALL, MID and LARGE are dislayed. SELECT When SQUARE is selected 3 ROOM SIZE? MID 5.4m.. [<]/[>]:Select [SELECT]:Enter BASIC OPERATION When RECTANGLE is selected 3 ROOM SIZE? MID 4.6m 6.2m... [<]/[>]:Select [SELECT]:Enter 27

34 EASY SETUP SMALL (Small listening room) 3.8 m (12.5ft) Arox. 3.4 m (11.2ft) 3.8 m (12.5ft) Arox. 4.2 m (13.8ft) Select SMALL if both the width (W) and deth (D) of your listening room are 3.8 m (12.5ft), or the width (W) is aroximately 3.4 m (11.2ft) and the deth (D) aroximately 4.2 m (13.8ft). MID (Medium-sized listening room) 5.4 m (17.7ft) Arox. 4.6 m (15.1ft) 5.4 m (17.7ft) Arox. 6.2 m (20.3ft) Select MID if both the width (W) and deth (D) of your listening room are 5.4 m (17.7ft), or the width (W) is aroximately 4.6 m (15.1ft) and the deth (D) aroximately 6.2 m (20.3ft). LARGE (Large listening room) 6.6 m (21.7ft) Arox. 5.4 m (17.7ft) 6.6 m (21.7ft) Arox. 7.6 m (24.9ft) Select LARGE if both the width (W) and deth (D) of your listening room are 6.6 m (21.7ft), or the width (W) is aroximately 5.4 m (17.7ft) and the deth (D) aroximately 7.6 m (24.9ft). 28

35 EASY SETUP SETUP OK (Register settings) 12 Check that the following screen is dislayed on your TV. If this screen is not dislayed, make the settings in ROOM SIZE (Room size). ;EASY SETUP LE.E* SQUARE EQ..* CENTER LE.E* MID. 4 SETUP OK? Push [SELECT] Key. 13 Press SELECT. The following screen aears. If you select NO, your EASY SETUP settings are cancelled, and the dislay returns to the initial SET MENU screen. ;MEMORY. ;EASY SETUP ;MANUAL SETUP [ ]/[ ]:U/Down [SELECT]:Enter SET MENU To return to the revious screen, ress RETURN. 15 Press SET MENU to comlete the SET MENU rocedure. SET MENU 14 Press / to select YES or NO, then ress SELECT. YES: NO: 4 SETUP OK? DATA SETUP )YES NO [<]/[>]:Select [SELECT]:Enter To register the settings if they are satisfactory. To cancel the settings and return to the initial SET MENU screen. The OSD disaears from your TV screen. This comletes the arameter settings for EASY SETUP. To select a layback source and enjoy surround sound on this unit, see Selecting an inut source on age 31. BASIC OPERATION 4 SETUP OK? DATA SETUP )YES NO [<]/[>]:Select [SELECT]:Enter If you select YES, the following screen aears, and your EASY SETUP settings are registered. 4 SETUP OK? Data Setting! Please wait. 29

36 VOLUME CONTROLS VOLUME CONTROLS Adjusting the volume Muting the sound TV VOL MUTE VOLUME TV MUTE TV INPUT TV DVD INPUT VOLUME + STANDBY/ON Press MUTE. AUDIO MUTE ON aears in the front anel dislay, and the VOLUME indicator blinks. MUTE TV VOL MUTE VOLUME Remote control TV MUTE VOL TV INPUT TV DVD To increase the volume outut level, ress VOLUME +/. Adjustment range: 0.0 db to 99.5 db, MUTE (mute) VOLUME To resume the audio outut, ress MUTE again (or ress VOLUME +/ ). y You can adjust whether the outut volume is muted comletely or by 20 db when you ress MUTE (see age 39). VOLUME + or Front anel Remote control VOL 30

37 PLAYBACK PLAYBACK Selecting an inut source You can layback sound and/or images from the various comonents connected to this unit simly by ressing one of the inut selector buttons (TV, DVD, VCR or AUX) on the remote control. TV MUTE TV INPUT TV DVD SLEEP AUX VCR Playing back sources This section uses a DVD layer as the layback comonent (source). y For details on the TV and DVD layer you are using, refer to the owner s manual sulied with your TV and DVD layer. 1 Turn on the ower to your DVD layer using the sulied remote control. To layback a TV rogram Press TV. TV 2 Switch the video inut on your TV using the sulied remote control until the screen for your DVD layer is dislayed. VOL 3 If necessary, turn down the volume of your TV until you cannot hear any sound. 4 Press DVD on the remote control. The layback source for this unit switches to DVD. BASIC OPERATION To layback a DVD Press DVD. DVD DVD To layback a video tae Press VCR. VCR VOL 5 Playback the DVD on your DVD layer using the sulied remote control. Audio signals from your DVD layer are outut from this unit s seakers. y If the outut volume is too low, increase the volume on this unit to around 25 db. If you have set remote control codes for your TV and DVD layer, you can use this unit s remote control to oerate these comonents. For details on how to set remote control codes, see age 51. VOL To layback a comonent connected to the AUX jack Press AUX. AUX VOL 31

38 SELECTING A SURROUND MODE SELECTING A SURROUND MODE Playback sources and their available surround modes Deending on the layback source and selected surround mode, the indicators in the front anel dislay light u as follows. During CD layback: Enjoying 2-channel sources with multi channels You can enjoy a variety of surround sound effects by switching the surround mode, including multi-channel decoding for 2-channel sources, and 5.1-channel layback PCM NIGHT SURROUND SET MENU CH LEVEL MENU During DTS Digital signal inut or when DTS Neo:6 is selected: SELECT TEST RETURN During Dolby Digital signal inut: DIGITAL When Dolby Pro Logic is selected: Press SURROUND reeatedly (or ress SURROUND, then ress / ). SURROUND PL or When Dolby Pro Logic II is selected: PL SURROUND SELECT y You can select the tye of inut signal by ressing an inut selector button (see age 47). Surround Modes and Recommended Usages Surround mode Recommended source Dolby Pro Logic All sources Dolby Pro Logic II DTS Neo:6 Movie Music Game Cinema Music Movies Music Games Movies Music 32

39 ADDITIONAL PLAYBACK MODES Surround mode arameters You can configure the arameters for Dolby Pro Logic II Music and DTS Neo:6 Music to fine-tune the surround sound effect. 1 Press / to select the arameter. 2 Press / to configure the arameter. PANORAMA (when selecting PLII Music) Gives front L/R channel sound a wraaround effect, distributed throughout the entire surround sound field, for an exansive feeling. Choices: ON/OFF (Default: OFF) DIMENSION (when selecting PLII Music) ADDITIONAL PLAYBACK MODES Night listening modes The night listening modes are designed to imrove listenability at lower volumes or at night. Choose either NIGHT:CINEMA or NIGHT:MUSIC deending on the tye of material you are laying. Press NIGHT on the remote control reeatedly to select cinema or music. When night listening is selected, the NIGHT indicator in the front anel dislay lights u. NIGHT Adjusts the difference in volume between front and surround channels to the volume balance you desire. Variable range: -3 (toward the surround direction) to +3 (toward the front direction) (Default: STD) CENTER WIDTH (when selecting PLII Music) Distributes the center channel sound to the left and right. If set to 0, center channel sounds outut only from the center seaker. Variable range: 0 to 7 (Default: 3) C. IMAGE (when selecting DTS Neo:6 Music) Adjusts the center image from three seakers (front and center) to varying degrees. Variable range: 0.0 (wider) to 0.5 (toward the center) (Default: 0.2) Select NIGHT:CINEMA when watching films to reduce the dynamic range of film soundtracks and make dialog easier to hear at lower volumes. Select NIGHT:MUSIC when listening to music sources to reserve ease-of-listening for all sounds. Select OFF if you do not want to use this function. Press / to adjust the effect level while NIGHT:CINEMA or NIGHT:MUSIC is dislayed. This adjusts the level of comression. Effect.Lvl:MID Select MIN for minimum comression. Select MID for standard comression. Select MAX for maximum comression. BASIC OPERATION 33

40 ADJUSTING BEAM MODE SETTINGS ADJUSTING BEAM MODE SETTINGS You can change the beam mode to suit the inut source for this unit using the beam mode buttons. You can switch between: stereo mode for 2-channel sources, 3 beam mode and 5 beam mode and ST(STEREO)+3 beam mode for 5.1-channel layback. If you selected a wall installation tye (instead of corner) for this unit in EASY SETUP SP POSITION (age 25), or you selected wall for MANUAL SETUP SP POSITION (age 40), all modes are available for selection. If you selected a corner installation tye (instead of wall) for this unit in EASY SETUP SP POSITION (age 25), or you selected CORNER for MANUAL SETUP SP POSITION (age 40), only the stereo and ST(STEREO)+3 beam modes can be selected. SLEEP AUX VCR 3 beam mode Stereo mode BEAM MODE Oututs audio from the front left and right seakers. This mode is ideal for laying back hi-fidelity sources, such as CDs, and should be used to relace your TV seakers. When laying multi-channel sources, all signals excet those for the front left and right seakers are mixed down and outut from the front left and right seakers. You can select surround mode during beam mode, but surround mode becomes disabled when stereo mode is selected. Oututs audio from the front left, center and front right seakers. Because the listening osition area is widened when signals are outut to the front seaker ositions only, you can enjoy excellent quality surround sound over a wider area. This mode is ideal when you want to enjoy movies with the whole family. When laying multi-channel sources, surround left and right signals are mixed down and outut to the front left and right seaker ositions. Remote control 5 beam mode Remote control Oututs audio signals from the front left and right, center, and surround left and right seakers. This mode is ideal for enjoying surround sound effects to the fullest when watching movie DVDs recorded in a multi-channel format or laying back 2- channel sources in a multi-channel format. To achieve to best surround sound effect, make sure that there are no objects laced in the ath of sound beams that may revent the beams from rebounding directly off your listening room wall. The front left and right sound beams are outut towards the wall. Remote control 34