Right Picture. Right Place. Right Time. Available CFO products. Teleste video security and information Optical real-time video transmission products

Transcription

1 Valid July 1st 2015 Teleste video security and information Optical real-time video transmission products Right Picture. Right Place. Right Time.

2 Contents Teleste CFO introduction....2 CFO First ile series with optics CFO CFO CFO CFO CFO CFO transceiver modules...6 CFO First ile series with fixed optics....7 CFO CFO CFO CFO CFO CFO CFO CFO CFO CFO CFO OPX CWD optical multiplexing CEV Four channel video modems...10 CEV Eight channel video modems COR Optical repeaters...12 Optical switch...12 Add/Drop units...13 ux/demux units...13 Splitters & WD...13 CFO Accessories Accessories for rack installation Accessories for stand-alone installation..15 CLP line protection modules ultimode fibre patch cords Single-mode fibre patch cords...16 Connection cables...16 CFO product overview...17 CFO OPX point-to-point system...18 CFO OPX add-drop system...18 CFO applications Teleste CFO introduction Nearly two decades the traditional fibre optics operation has been the core technology in many security video systems. With a successfull background in this field Teleste continues the tradition by it s well-know CFO product range. Today the fully redesigned CFO platform is ready to challenge any modern system requirement in the class of uncompressed realtime video transmission. CFO First ile offering is mainly looking at point-to-point type operation. This series provides an efficient transmission system for isolated CCTV islands or alternatively bring the outer edge CCTV cameras into a reach of a more sophisticated network cloud for further signal forwarding. Depending on the needed functionality a selection of different type of links are available either for video only type needs, or for video feeds requiring additional data, contact closure, audio or even Ethernet communication as well. CFO First ile series covers both multimode and single-mode fibre environments. CFO OPX series is a perfect match for fibre optic transmission systems requiring a much more complex approach on system topology. CFO OPX is based on optical multiplexing technology and allows efficient building of multi-wavelenght optical system covering point-to-point, add-and-drop and ring type topologies. Extreme distances or other unexpected fibre losses can be handled by using a series of optical repeaters. CFO OPX is based on ITU-T G694.2 recommendation and typically uses eight selected optical wavelengths between 1470nm and 1610nm (other wavelengths upon request). Naturally the passive backbone modules support also the use of 1310nm optical window and hence allowing a parallel use over any legacy system. As in First ile offering also multiple audio and data channels are available. For Ethernet communication needs there are units supporting either bridging type operation up to 100bps or more complex switching devices with up-links up to 1 Gbps rates. All CFO devices share the same installation schemes. All rack card type CFO units are compatible with CSR range installation racks and CA range stand-alone module adapters. Special mini-size modules are provided with required mounting mechanics. The most typical supply voltage is 12 VDC, however some transmitter modules are also able to take benefit of 24 VAC supply voltage as well. ost of the CFO devices are feasible for temperature hardened operation ( C / F). Depending on model the unit configuration is done either with user-selectable DIP-switch settings or via a hyperterminal/telnet type user management interface. SNP is supported in selected CFO units. Copyright 2015 Teleste Corporation. All rights reserved. TELESTE is a registered trademark of Teleste Corporation. 2 Contents & Introduction

3 CFO First ile series with optics The new CFO First ile product line provides a new fresh approach for cost effective fibre optic video transmission. The new series consist of 4-ch and 8-ch video multiplexers either for video only type operation or operation supporting data, audio, contact closure and Ethernet. The optics are provided by a hotswappable transceiver module. All settings are done by DIP switches. Based on required functionality ready-assembled link combinations are available as shown in the list below. Also bare modules without optics are available. For other optical requirements please refer to our selection of suitable SG series transceivers (page 6). CFO410 Four channel video only link for fixed camera applications V x4 CFO410 series provides uncompressed and real-time digital transmission of four (4) composite video channels (2-ch for Y/C). Units are 5HP wide rack mount cards. Stand-alone (SA) unit is embedded to CA015 module adapter. Temperature hardened ( C). Optical connector LC/PC (). Note! SX, and L models are not applicable for WD operation due to bi-directional. CRT410 CRR410 4-ch video transmitter without optics 4-ch video receiver without optics to be ordered separately CT410SX 4-ch video transmitter SA (incl. CA015) CRT410SX 4-ch video transmitter 550m, 1 x F SX = 1310/1550nm mmf up to 550m S = 1310nm mmf up to 2km = 1310/1490nm smf up to 20km CRR410SX CT410S CRT410S CRR410S 4-ch video receiver 4-ch video transmitter SA (incl. CA015) 4-ch video transmitter 4-ch video receiver 2km, 2 x F L = 1310/1550nm smf up to 40km CT410 CRT410 4-ch video transmitter SA (incl. CA015) 4-ch video transmitter 20km, 1 x SF CRR410 4-ch video receiver CT410L 4-ch video transmitter SA (incl. CA015) CRT410L 4-ch video transmitter 40km, 1 x SF CRR410L 4-ch video receiver CFO810 Eight channel video only link for fixed camera applications V x8 CFO810 series provides uncompressed and real-time digital transmission of eight (8) composite video channels (4-ch for Y/C). Units are 10HP wide rack mount cards. Stand-alone (SA) unit is embedded to CA025 module adapter. Temperature hardened ( C). Optical connector LC/PC (). Note! SX, and L models are not applicable for WD operation due to bi-directional. CRT810 CRR810 8-ch video transmitter without optics 8-ch video receiver without optics to be ordered separately CT810SX 8-ch video transmitter SA (incl. CA025) CRT810SX 8-ch video transmitter 550m, 1 x F SX = 1310/1550nm mmf up to 550m CRR810SX 8-ch video receiver S = 1310nm mmf up to 2km = 1310/1490nm smf up to 20km L = 1310/1550nm smf up to 40km CT810S CRT810S CRR810S CT810 8-ch video transmitter SA (incl. CA025) 8-ch video transmitter 8-ch video receiver 8-ch video transmitter SA (incl. CA025) 2km, 2 x F CRT810 8-ch video transmitter 20km, 1 x SF CRR810 8-ch video receiver CT810L 8-ch video transmitter SA (incl. CA025) CRT810L 8-ch video transmitter 40km, 1 x SF CRR810L 8-ch video receiver CFO First ile series with optics 3

4 CFO420 Four channel video link for PTZ camera applications V x4 D CFO420 series provides uncompressed and real-time digital transmission of four (4) composite video channels (2-ch for Y/C) with one (1) configurable bi-directional RS-data channel. Units are 10HP wide rack mount cards. Stand-alone (SA) unit is embedded to CA025 module adapter. Temperature hardened ( C). Optical connector LC/PC (). S = 1310/1310nm mmf up to 2km = 1310/1490nm smf up to 20km L = 1310/1550nm smf up to 40km CRT420 CRR420 CT420S CRT420S CRR420S CT420 CRT420 CRR420 CT420L CRT420L CRR420L 4-ch video transmitter without optics 4-ch video receiver without optics 4-ch video transmitter SA (incl. CA025) 4-ch video transmitter 4-ch video receiver 4-ch video transmitter SA (incl. CA025) 4-ch video transmitter 4-ch video receiver 4-ch video transmitter SA (incl. CA025) 4-ch video transmitter 4-ch video receiver to be ordered separately 2km, 2 x F 20km, 1 x SF 40km, 1 x SF CFO820 Eight channel video link for PTZ camera applications V x8 D CFO820 series provides uncompressed and real-time digital transmission of eight (8) composite video channels (4-ch for Y/C) with one (1) configurable bi-directional RS-data channel. Units are 10HP wide rack mount cards. Stand-alone (SA) unit is embedded to CA025 module adapter. Temperature hardened ( C). Optical connector LC/PC (). S = 1310/1310nm mmf up to 2km = 1310/1490nm smf up to 20km L = 1310/1550nm smf up to 40km CRT820 CRR820 CT820S CRT820S CRR820S CT820 CRT820 CRR820 CT820L CRT820L CRR820L 8-ch video transmitter without optics 8- ch video receiver without optics 8-ch video transmitter SA (incl. CA025) 8-ch video transmitter 8-ch video receiver 8-ch video transmitter SA (incl. CA025) 8-ch video transmitter 8-ch video receiver 8-ch video transmitter SA (incl. CA025) 8-ch video transmitter 8-ch video receiver to be ordered separately 2km, 2 x F 20km, 1 x SF 40km, 1 x SF 4 CFO First ile series with optics

5 V x3 SX = 1310/1550nm mmf up to 550m S = 1310/1310nm mmf up to 2km = 1310/1490nm smf up to 20km L = 1310/1550nm smf up to 40km CFO160 One channel video link for extended PTZ camera applications CFO160 series provides uncompressed and real-time digital transmission of one (1) CVBS video channel with three (3) configurable bi-directional RS-data channels, two (2) audio, 3/2 contact closure and one Fast Ethernet channel over optical fibre. Ethernet Bridge interface is 10/100Base-Tx, full 100bps thruput. Units are 10HP wide rack mount cards. Stand-alone (SA) unit is embedded to CA025 module adapter. Temperature hardened ( C). Optical connector LC/PC (). CRT160 CRR160 CT160SX CRT160SX CRR160SX CT160S CRT160S CRR160S CT160 CRT160 CRR160 CT160L CRT160L CRR160L 1-ch video transmitter without optics 1-ch video receiver without optics 1-ch video transmitter SA (incl. CA025) 1-ch video transmitter 1-ch video receiver 1-ch video transmitter SA (incl. CA025) 1-ch video transmitter 1-ch video receiver 1-ch video transmitter SA (incl. CA025) 1-ch video transmitter 1-ch video receiver 1-ch video transmitter SA (incl. CA025) 1-ch video transmitter 1-ch video receiver to be ordered separately 550m, 1 x F 2km, 2 x F 20km, 1 x SF 40km, 1 x SF V x4 x3 S = 1310/1310nm mmf up to 2km = 1310/1490nm smf up to 20km L = 1310/1550nm smf up to 40km CFO460 Four channel video link for extended PTZ camera applications CFO460 series provides uncompressed and real-time digital transmission of four (4) CVBS video channel with three (3) configurable bi-directional RS-data channels, two (2) audio, 3/2 contact closure and one Fast Ethernet channel over optical fibre. Ethernet Bridge interface is 10/100Base-Tx, full 100bps thruput. Units are 10HP wide rack mount cards. Stand-alone (SA) unit is embedded to CA025 module adapter. Temperature hardened ( C). Optical connector LC/PC (). CRT460 CRR460 CT460S CRT460S CRR460S CT460 CRT460 CRR460 CT460L CRT460L CRR460L 4-ch video transmitter without optics 4-ch video receiver without optics 4-ch video transmitter SA (incl. CA025) 4-ch video transmitter 4-ch video receiver 4-ch video transmitter SA (incl. CA025) 4-ch video transmitter 4-ch video receiver 4-ch video transmitter SA (incl. CA025) 4-ch video transmitter 4-ch video receiver to be ordered separately 2km, 2 x F 20km, 1 x SF 40km, 1 x SF CFO First ile series with optics 5

6 transceiver modules For optical operation some of the CFO series devices are designed to adapt with (small-form pluggable) optical transceiver modules (proprietary protocol). For most typical applications the desired product configurations or combinations are available as ready-defined ordering codes. For spare part use or alternative self-made combinations the s are also available as individual product items as shown below. modules for Gigabit Ethernet (2 x LC = dual fibre, 1 x LC = single fibre) SG101B ultimode 850nm, 8.5dB 550m, C, 2 x LC SG111A ultimode 1310nm, 10dB 2km (S), C, 2 x LC SG211A Single-mode 1310nm, 10.5dB 10km, C, 2 x LC SG214A Single-mode 1310nm, 20dB 30km, C, 2 x LC SG222A Single-mode 1550nm, 12dB 30km, C, 2 x LC Single fibre (1 x LC), bidi SG224A Single-mode 1550nm, 20dB 50km, C, 2 x LC SG226A Single-mode 1550nm, 24dB 70km, C, 2 x LC Dual fibre (2 x LC), 2-way Available transceiver types for Gigabit Ethernet. SG228B Single-mode 1550nm, 30dB 110km, C, 2 x LC SG321A ultimode BIDI 1310/1550nm, 11dB 550m (SX), C, 1 x LC SG331A ultimode BIDI 1550/1310nm, 11dB 550m (SX), C, 1 x LC SG443A Single-mode BIDI 1310/1490nm, 15dB 20km (), C, 1 x LC SG453A Single-mode BIDI 1490/1310nm, 15dB 20km (), C, 1 x LC SG424A Single-mode BIDI 1310/1550nm, 20dB 40km (L), C, 1 x LC SG434A Single-mode BIDI 1550/1310nm, 20dB 40km (L), C, 1 x LC 6 CFO First ile series with optics

7 CFO First ile series with fixed optics The CFO First ile Basic line provides cost effective and easy to install video, data, audio, contact closure and Ethernet transmission over a multimode optical fibre even up to 6.5 kilometres, and in single-mode fibre applications up to distances of tens of kilometres. The fully digital product range varies from one channel video only links up to eight-channel video links. CFO First ile basic products take advantage of the most appropriate technology for the application, with the success factors being reliability, performance and ease of installation. The product line includes cards for rack mount, module adapters for stand-alone installation and all other necessary accessories. V V V V 1310nm mmf up to 6.5km CFO100 One channel video only link for fixed camera applications CFO100 series provides uncompressed digital transmission of one CVBS video channel over one multimode (1310nm) fibre for up to 6.5km. Available in stand-alone small size transmitter unit and 5HP wide rack mount transmitter/receiver card formats. CPT101 can be operate with 12 VDC and 24 VAC. Temperature hardened ( C). 1/3 x ST optical connector. CPT101 CRT103 CRR101 CRR103, triple channel receiver receiver, triple channel Small size stand-alone unit (DIN mounting kit optional, see CIK001) 5HP wide rack mount card CFO331 One channel video link for PTZ camera applications V D CFO331 series provides uncompressed digital transmission of one CVBS video channel with bidirectional data (1) and contact closure (1) channels over one multimode (1310/1550nm) fibre for up to 5km. Available in stand-alone compact size transmitter unit and 5HP wide rack mount receiver card formats. CPT331 can be operate with 12 VDC and 24 VAC. Temperature hardened ( C). 1 x SC/PC optical connector. CPT331 Compact size stand-alone unit CRR331 receiver 5HP wide rack mount card 1310/1550nm mmf up to 5km CFO521 One channel video link for PTZ camera applications V D CFO521 series provides uncompressed digital transmission of one CVBS video channel with bidirectional data (1) and contact closure (1) channels over one single-mode (1310/1550nm) fibre for up to 40km. Available in stand-alone compact size transmitter unit and 5HP wide rack mount receiver card formats. Temperature hardened ( C). 1 x SC/PC optical connector. CPT521 Compact size stand-alone unit (DIN mounting kit optional, see CIK001) CCT541 Add-on card to Pelco Spectra IV CRR521 receiver 5HP wide rack mount card 1310/1550nm smf up to 40km CFO First ile series with fixed optics 7

8 V x4 CFO432 Four channel video link for PTZ camera applications CFO432 series provides uncompressed digital transmission of four CVBS or two Y/C video channels with bi-directional data (3), audio (2), contact closure (1) channels and one 10/100Base-Tx Ethernet Bridge over two multimode fibres (1310nm Tx/ Rx) for up to 1.5km. Temperature hardened ( C). 2 x LC/PC optical connector. SNP & in-band management support. CT432 CRT432 CRR432 receiver Stand-alone unit with case (module adapter CA025 included) 10HP wide rack mount card See a new generation alternative product CFO460 series, on page nm mmf up to 1.5/2.0km (O1/O2) 1310/1310nm smf 20dB link budget V CFO161 One channel video link for PTZ camera applications CFO161 series provides uncompressed digital transmission of one CVBS video channel with bi-directional data (3), audio (2), contact closure (1) channels and one 10/100Base-Tx Ethernet Bridge over one single-mode (1310/1310nm) fibre for up to 50km. Temperature hardened ( C). 1 x SC/APC 8 optical connector. SNP & in-band management support. CT161 CRT161 CRR161 receiver Stand-alone unit with case (module adapter CA025 included) 10HP wide rack mount card See a new generation alternative product CFO160 series, on page /1310nm smf 24dB link budget V CFO191 One channel video link for PTZ camera applications CFO191 series provides uncompressed digital transmission of one CVBS video channel with bi-directional data (3), audio (2), contact closure (1) channels and one 10/100Base-Tx Ethernet Bridge over one single-mode (1550/1310nm) fibre for up to 60km. Temperature hardened ( C). 1 x SC/APC 8 optical connector. SNP & in-band management support. CT191 CRT191 CRR191 receiver Stand-alone unit with case (module adapter CA025 included) 10HP wide rack mount card See a new generation alternative product CFO160 series, on page 5. 8 CFO First ile series with fixed optics

9 1310/1310nm smf 20dB link budget V x4 CFO461 Four channel video link for PTZ camera applications CFO461 series provides uncompressed digital transmission of four CVBS or two Y/C video channels with bi-directional data (3), audio (2), contact closure (1) channels and one 10/100Base-Tx Ethernet Bridge over one single-mode (1310/1310nm) fibre for up to 50km. Temperature hardened ( C). 1 x SC/APC 8 optical connector. SNP & in-band management support. CT461 CRT461 CRR461 receiver Stand-alone unit with case (module adapter CA025 included) 10HP wide rack mount card See a new generation alternative product CFO460 series, on page 5. V x4 CFO491 Four channel video link for PTZ camera applications CFO491 series provides uncompressed digital transmission of four CVBS or two Y/C video channels with bi-directional data (3), audio (2) and contact closure (1) channels over one single-mode (1550/1310nm) fibre for up to 60km. Temperature hardened ( C). 1 x SC/APC 8 optical connector. SNP & in-band management support. CT491 CRT491 CRR491 receiver Stand-alone unit with case (module adapter CA025 included) 10HP wide rack mount card See a new generation alternative product CFO460 series, on page /1310nm smf 24dB link budget 1310/1310nm smf 20dB link budget V x8 CFO861 Eight channel video link for PTZ camera applications CFO861 series provides uncompressed digital transmission of eight CVBS or four Y/C video channels with bi-directional data (3), audio (2), contact closure (1) channels and one 10/100Base-Tx Ethernet Bridge over one single-mode (1310/1310nm) fibre for up to 50km. Temperature hardened ( C). 1 x SC/APC 8 optical connector. SNP & in-band management support. CT861 CRT861 CRR861 receiver Stand-alone unit with case (module adapter CA035 included) 15HP wide rack mount card See a new generation alternative product CFO820 series, on page /1310nm smf 24dB link budget V x8 CFO891 Eight channel video link for PTZ camera applications CFO891 series provides uncompressed digital transmission of eight CVBS or four Y/C video channels with bi-directional data (3), audio (2) and contact closure (1) channels over one single-mode (1550/1310nm) fibre for up to 60km. Temperature hardened ( C). 1 x SC/APC 8 optical connector. SNP & in-band management support. CT891 CRT891 CRR891 receiver Stand-alone unit with case (module adapter CA035 included) 15HP wide rack mount card See a new generation alternative product CFO820 series, on page 4. CFO First ile series with fixed optics 9

10 CFO OPX CWD optical multiplexing Teleste s CFO OPX series utilises Coarse Wavelength Division ultiplexing (CWD) technology for the transmission of 64 (or higher when combined with 1310nm) video channels with bi-directional data, audio, contact closure and Ethernet traffic over one shared single-mode fibre. Available as 5HP, 10HP and 15HP building block card formats, the CFO OPX is a very flexible product platform for optically multiplexed add/drop system, or topologies requiring redundant fibre. Very long transmission distances can be achieved by using optical repeaters nm smf 20dB link budget Bi-directional V x4 CEV Four channel video modems for PTZ camera applications The CEV series bi-directional video modem provides uncompressed digital transmission of four CVBS or two Y/C video channels with bi-directional data (3), audio (2), contact closure (1) channels and one 10/100Base-Tx Ethernet Bridge over one single-mode (CWD) fibre for up to tens of kilometers. Temperature hardened ( C). 1 x SC/APC 8 optical connector. SNP & in-band management support. Note! Alias code (column 2) can be used for ordering a product instead of a long-configuration code (column 1). s: CEV-A-A4TB-C11A-AA-A CRT461-C11 CWD 1470nm, std, -1dBm CEV-A-A4TB-C12A-AB-A CRT461-C12 CWD 1490nm, std, -1dBm CEV-A-A4TB-C13A-AC-A CRT461-C13 CWD 1510nm, std, -1dBm CEV-A-A4TB-C14A-AD-A CRT461-C14 CWD 1530nm, std, -1dBm CEV-A-A4TB-C15A-AE-A CRT461-C15 CWD 1550nm, std, -1dBm CEV-A-A4TB-C16A-AF-A CRT461-C16 CWD 1570nm, std, -1dBm CEV-A-A4TB-C17A-AG-A CRT461-C17 CWD 1590nm, std, -1dBm CEV-A-A4TB-C18A-AH-A CRT461-C18 CWD 1610nm, std, -1dBm receivers: CEV-A-A4RB-C11A-AA-A CRR461-C11 CWD 1470nm, std, -21dBm CEV-A-A4RB-C12A-AB-A CRR461-C12 CWD 1490nm, std, -21dBm CEV-A-A4RB-C13A-AC-A CRR461-C13 CWD 1510nm, std, -21dBm CEV-A-A4RB-C14A-AD-A CRR461-C14 CWD 1530nm, std, -21dBm CEV-A-A4RB-C15A-AE-A CRR461-C15 CWD 1550nm, std, -21dBm CEV-A-A4RB-C16A-AF-A CRR461-C16 CWD 1570nm, std, -21dBm CEV-A-A4RB-C17A-AG-A CRR461-C17 CWD 1590nm, std, -21dBm CEV-A-A4RB-C18A-AH-A CRR461-C18 CWD 1610nm, std, -21dBm 10HP wide rack mount cards nm smf 26dB link budget Unidirectional V x4 CEV Four channel video modems for fixed camera applications The CEV series uni-directional video modem provides uncompressed digital transmission of four CVBS or two Y/C video channels with uni-directional data (3), audio (2) and contact closure (1) channels over one single-mode (CWD) fibre for up to tens of kilometers. Temperature hardened ( C). 1 x SC/APC 8 optical connector. SNP & in-band management support. Note! Alias code (column 2) can be used for ordering a product instead of a long-configuration code (column 1). s: CEV-A-A4TA-C11X-BA-A CRT471-C11 CWD 1470nm, std, +2dBm CEV-A-A4TA-C12X-BB-A CRT471-C12 CWD 1490nm, std, +2dBm CEV-A-A4TA-C13X-BC-A CRT471-C13 CWD 1510nm, std, +2dBm CEV-A-A4TA-C14X-BD-A CRT471-C14 CWD 1530nm, std, +2dBm CEV-A-A4TA-C15X-BE-A CRT471-C15 CWD 1550nm, std, +2dBm CEV-A-A4TA-C16X-BF-A CRT471-C16 CWD 1570nm, std, +2dBm CEV-A-A4TA-C17X-BG-A CRT471-C17 CWD 1590nm, std, +2dBm CEV-A-A4TA-C18X-BH-A CRT471-C18 CWD 1610nm, std, +2dBm receiver: CEV-A-A4RA-XXXX-BI-A CRR471-WB CWD nm, std, 24dBm 10HP wide rack mount cards 10 CFO OPX CWD Optical multiplexing

11 nm smf 20dB link budget Bi-directional V x8 CEV Eight channel video modems for PTZ camera applications The CEV series bi-directional video modem provides uncompressed digital transmission of eight CVBS or four Y/C video channels with bi-directional data (3), audio (2), contact closure (1) channels and one 10/100Base-Tx Ethernet Bridge over one single-mode (CWD) fibre for up to tens of kilometers. Temperature hardened ( C). 1 x SC/APC 8 optical connector. SNP & in-band management support. Note! Alias code (column 2) can be used for ordering a product instead of a long-configuration code (column 1). s: CEV-A-A8TB-C11A-AA-B CRT861-C11 CWD 1470nm, std, -1dBm CEV-A-A8TB-C12A-AB-B CRT861-C12 CWD 1490nm, std, -1dBm CEV-A-A8TB-C13A-AC-B CRT861-C13 CWD 1510nm, std, -1dBm CEV-A-A8TB-C14A-AD-B CRT861-C14 CWD 1530nm, std, -1dBm CEV-A-A8TB-C15A-AE-B CRT861-C15 CWD 1550nm, std, -1dBm CEV-A-A8TB-C16A-AF-B CRT861-C16 CWD 1570nm, std, -1dBm CEV-A-A8TB-C17A-AG-B CRT861-C17 CWD 1590nm, std, -1dBm CEV-A-A8TB-C18A-AH-B CRT861-C18 CWD 1610nm, std, -1dBm receivers: CEV-A-A8RD-C11A-AA-B CRR861-C11 CWD 1470nm, APD, -21dBm CEV-A-A8RD-C12A-AB-B CRR861-C12 CWD 1490nm, APD, -21dBm CEV-A-A8RD-C13A-AC-B CRR861-C13 CWD 1510nm, APD, -21dBm CEV-A-A8RD-C14A-AD-B CRR861-C14 CWD 1530nm, APD, -21dBm CEV-A-A8RD-C15A-AE-B CRR861-C15 CWD 1550nm, APD, -21dBm CEV-A-A8RD-C16A-AF-B CRR861-C16 CWD 1570nm, APD, -21dBm CEV-A-A8RD-C17A-AG-B CRR861-C17 CWD 1590nm, APD, -21dBm CEV-A-A8RD-C18A-AH-B CRR861-C18 CWD 1610nm, APD, -21dBm 15HP wide rack mount cards nm smf 26dB link budget Unidirectional V x8 CEV Eight channel video modems for fixed camera applications The CEV series uni-directional video modem provides uncompressed digital transmission of eight CVBS or four Y/C video channels with uni-directional data (3), audio (2) and contact closure (1) channels over one single-mode (CWD) fibre for up to tens of kilometers. Temperature hardened ( C). 1 x SC/APC 8 optical connector. SNP & in-band management support. Note! Alias code (column 2) can be used for ordering a product instead of a long-configuration code (column 1). s: CEV-A-A8TA-C11A-BA-B CRT871-C11 CWD 1470nm, std, +2dBm CEV-A-A8TA-C12A-BB-B CRT871-C12 CWD 1490nm, std, +2dBm CEV-A-A8TA-C13A-BC-B CRT871-C13 CWD 1510nm, std, +2dBm CEV-A-A8TA-C14A-BD-B CRT871-C14 CWD 1530nm, std, +2dBm CEV-A-A8TA-C15A-BE-B CRT871-C15 CWD 1550nm, std, +2dBm CEV-A-A8TA-C16A-BF-B CRT871-C16 CWD 1570nm, std, +2dBm CEV-A-A8TA-C17A-BG-B CRT871-C17 CWD 1590nm, std, +2dBm CEV-A-A8TA-C18A-BH-B CRT871-C18 CWD 1610nm, std, +2dBm receiver: CEV-A-A8RC-XXXX-BI-B CRR871-WB CWD nm, apd, -24dBm 15HP wide rack mount cards CFO OPX CWD Optical multiplexing 11

12 COR Optical repeaters Non-regenerative optical repeaters provide a cost effective way to cover extreme transmission distances over optical fibre (CWD wavelength specific). A typical repeater configuration supports fully bi-directional operation but has also option to be defined for one-way operation as well. The factory tuned COR repeaters are optically compatible with all earlier generation CFO OPX and CFOx41/CFOx61 series video modems. Temperature hardened ( C). 2 x SC/APC 8 optical connector. Note! Alias code (column 2) can be used for ordering a product instead of a longconfiguration code (column 1). COR Optical repeater. COR-A-RB-C11C11A-A OPXRPT2-C11 Bi-directional, ch11/1470nm COR-A-RB-C12C12A-B OPXRPT2-C12 Bi-directional, ch12/1490nm COR-A-RB-C13C13A-C OPXRPT2-C13 Bi-directional, ch13/1510nm COR-A-RB-C14C14A-D OPXRPT2-C14 Bi-directional, ch14/1530nm COR-A-RB-C15C15A-E OPXRPT2-C15 Bi-directional, ch15/1550nm COR-A-RB-C16C16A-F OPXRPT2-C16 Bi-directional, ch16/1570nm COR-A-RB-C17C17A-G OPXRPT2-C17 Bi-directional, ch17/1590nm COR-A-RB-C18C18A-H OPXRPT2-C18 Bi-directional, ch18/1610nm COR-A-RB-B22B22A-I OPXRPT Bi-directional, 1310nm COR-A-RA-XXXC11A-A OPXRPT1-C11 Uni-directional, ch11/1470nm COR-A-RA-XXXC12A-B OPXRPT1-C12 Uni-directional, ch12/1490nm COR-A-RA-XXXC13A-C OPXRPT1-C13 Uni-directional, ch13/1510nm COR-A-RA-XXXC14A-D OPXRPT1-C14 Uni-directional, ch14/1530nm COR-A-RA-XXXC15A-E OPXRPT1-C15 Uni-directional, ch15/1550nm COR-A-RA-XXXC16A-F OPXRPT1-C16 Uni-directional, ch16/1570nm COR-A-RA-XXXC17A-G OPXRPT1-C17 Uni-directional, ch17/1590nm COR-A-RA-XXXC18A-H OPXRPT1-C18 Uni-directional, ch18/1610nm Link budget 20dB Link budget 26dB 10HP wide rack mount card Optical switch 1 x 2 type non-latching switch CO-A-H-G1A Optical switch Optical switches are used to re-direct the optical transmission streams in case of link loss as for example. The optical bandpass of the unit covers all common CWD wavelenghts and supports the 1310nm window as well. Naturally fully bi-directional optical operation is allowed. When CO optical switch is used in conjunction with CFOx61/x91 or CEV range video modems the optical switching can be automatic when it is controlled by the Link Loss Alarm available from these video modems. Alternatively the optical switch can be configured to operate in case of system power loss or to have remotely controlled switching by means of an external I/O control. Temperature hardened ( C). 3 x SC/APC 8 optical connector. CO-A-H-G1A 1 x 2 type non-latching switch for single-mode fibre 10HP wide rack mount card 12 CFO OPX CWD Optical multiplexing

13 CO Optical Accessories Extending the capabilities of CFO OPX CWD systems, the CWD optical passive modules can enable a network topology in which one or more wavelengths can be added, dropped, combined, extracted or splitted on demand at specific locations along the CWD trunk. The technology enables flexible and intelligent planning and provisioning of optical services while at the same time simplifies the deployment and maintenance of an optical network. Note! Alias code (column 2) can be used for ordering a product instead of a long-configuration code (column 1). Add/Drop CWD single channel add/drop units The single channel CWD add/drop version of CO has been designed to support bi-directional add-and-drop operation. There are eight different variants available covering the ITU CWD channels C11...C18. The bybass between common ports includes the 1310nm optical window as well. 3 x SC/APC 8 optical connectors. CO-A-A-11A-X OPXAD-C11 One channel add/drop, ch11 (1471nm) CO-A-A-12A-X OPXAD-C12 One channel add/drop, ch12 (1491nm) Add/Drop unit. CO-A-A-13A-X OPXAD-C13 One channel add/drop, ch13 (1511nm) CO-A-A-14A-X O PXAD-C14 One channel add/drop, ch14 (1531nm) CO-A-A-15A-X OPXAD-C15 One channel add/drop, ch15 (1551nm) CO-A-A-16A-X OPXAD-C16 One channel add/drop, ch16 (1571nm) CO-A-A-17A-X OPXAD-C17 One channel add/drop, ch17 (1591nm) CO-A-A-18A-X OPXAD-C18 One channel add/drop, ch18 (1611nm) 5HP wide rack mount card ux/demux CWD multiplexer/demultiplexer units The four channel and eight channel CWD mux/demux products have been designed for 4 or 8 wavelength operation (ITU CWD channels C ). With four channel units the other part of CWD spectrum can by-pass the unit providing a possibility to use this unit also for four channel add/drop topologies. A parallel operation with a legacy system is enabled by using a dedicated tap for 1310nm bybassing. SC/APC 8 optical connectors. ux/demux units. CO-A-B-21A-X CO-A-B-25A-X OPXUX-A OPXUX-B Four channel mux/demux, ch11/12/13/14 (+ ch nm) 5HP wide rack mount Four channel mux/demux, ch15/16/17/18 card (+ ch nm) CO-A-C-51A-X OPXUX-C Eight channel mux/demux, ch 11/12/13/14/15/16/17/18 (+ 1310nm) 10HP wide rack mount card Splitters & WD A typical optical splitter has a split ratio of 50/50 and supports the 1310nm and 1550nm (CWD) optical operation. Splitters for any other split ratio are available upon request. Splitter and WD units. There are two different variants available for the optical wavelength division multiplexing (WD). The 1310/1550nm variant is for combining standard wideband optical signals in the second and third optical window into a single fibre. SC/APC 8 optical connectors. The 1310/CWD variant has been designed for combining an existing legacy 1310nm system with CWD based optical system (ch11...ch18). CO-A-D-00A-X OPXSPLT-A Optical splitter, 50/50%, & nm CO-A-F-F1A-X OPXWD-A WD 1310/1550, / nm 5HP wide rack mount card CO-A-F-F2A-X OPXWD-B WD 1310/CWD, / nm CFO OPX CWD Optical multiplexing 13

14 CFO Accessories The perfect combination of accessories makes installation easier for you. Teleste offers a range of accessories that perfectly complement one to another. This gives you the opportunity to assemble systems that perfectly reflect your individual needs. Rack installation Accessories for rack installation The CFO family of products all utilise the same rack installation mechanics, installation frame and power supply (PSU) systems which allow mixing of single channel, multichannel, single-mode and multimode fibre applications in the same system. This provides a very flexible and reliable approach to fulfill all of your optical fibre video transmission requirements. CSR216 Installation frame, front loading, PSU at rear 16 x 5HP card slots + 2 x PSU slots CSR216 Installation frame with CPS384 power supply and CCP042 cover plate. CPS384 Power supply unit. CFU014 Triple cooling fan tray. CVU014 Ventilation frame. CCP004, 005 and 020 cover plates. CSR316 Installation frame, rear loading, PSU at front 16 x 5HP card slots + 2 x PSU slots CPS384 Power supply for CSR216/316, EUR, 230 VAC 130W CPS384 US without power cord US, 115 VAC 130W CPS390 Power supply for CSR216/316, DC cable included -48 VDC 102W CPC221 EU plug, 2m CPC222 Angled power cord for CPS384 power supply UK plug, 2m CPC223 US plug, 2m CSR299 CSR216, CPS384, CCP004, CCP042, CPC221 CSR299 UK CSR299 US CSR399 CSR399 UK CSR399 US CSR300 CSR300 UK CSR400 CSR400 UK CSR216 installation frame package, single power supply CSR316 installation frame package, single power supply CSR216 installation frame package, dual power supply CSR316 installation frame package, dual power supply CSR216, CPS384, CCP004, CCP042, CPC222 CSR216, CPS384 US, CCP004, CCP042, CPC223 CSR316, CPS384, CCP004, CCP042, CPC221 CSR316, CPS384, CCP004, CCP042, CPC222 CSR316, CPS384 US, CCP004, CCP042, CPC223 CSR216, 2 x CPS384, CCP004, 2 x CPC221 CSR216, 2 x CPS384, CCP004, 2 x CPC222 CSR316, 2 x CPS384, CCP004, 2 x CPC221 CSR316, 2 x CPS384, CCP004, 2 x CPC222 CSR420 Installation frame CSR216 with DIN rails for 2 x PS120 power supply 2 x CIK120 PS120 Power supply for CSR420, without power cord 115/230 VAC 120W CIK110 Din rail kit for CSR rack, Power supply depth 40mm CIK120 PS120 power supply mount Power supply depth 68mm CPC521 EU plug, 2m CPC522 IEC lockable power cord for PS120 power supply unit UK plug, 2m CPC523 US plug, 2m CCP004-5 Cover plate, alarm / controller card slot (4HP) Bundle of 5 pcs CCP005-5 Cover plate, one 5HP wide slot (5HP) Bundle of 5 pcs CCP020-3 Cover plate, four 5HP wide slots (20HP) Bundle of 3 pcs PS120 power supply for CSR420 installation frame. CCP042 Cover plate, one reserve PSU CPS384 slot 42HP wide CFU014 Triple cooling fan tray, 230 VAC 1U 19 CVU014 Ventilation frame / cable management shelf 1U 19 CCU001 Open collector alarm / controller card 4HP wide rack mount card CCU002 Floating relay output alarm card 4HP wide rack mount card CRA002 Installation shelf for 2 x CA0x5 adapters, CA screws included 2U CFO Accessories

15 Stand-alone installation Accessories for stand-alone installation The CFO family of products all utilise the same rack installation mechanics, installation frame and power supply systems which allow mixing of one channel, multichannel, single-mode and multimode fibre applications in the same system. This provides a very flexible and reliable approach to fulfill all of your optical fibre video transmission requirements. CA015, CA025 & CA035 module adapters. CA015 CA025 CA035 odule adapter for wall mounting For 1 x 5HP wide card For 1 x 10HP wide card (or 2 x 5HP) For 1 x 15HP wide card (or 3 x 5HP) CIK001 DIN rail mounting kit for CPT101/321/331/521/541 Including angled-bnc adapter for video CIK002 Rear mounting kit For CA025/035 module adapters CPS251 12V mains adapter for CA, EUR 230 VAC 12 VDC / 2.1A CPS252 12V mains adapter for CA, UK 230 VAC 12 VDC / 2.1A CPS253 12V mains adapter for CA, USA 115 VAC 12 VDC / 2.1A AC008 Wall mount for CPS series mains adapters Includes wall bracket only CIK002 rear mounting plate. CLP line protection modules Overvoltage protection and mains hum suppression CLP001 line protection unit & CLP003 four channel video coil unit. CLP line protection modules are meant for stand-alone CFO installations on sites where is a clear need for overvoltage protection (lightning) and mains hum (50 Hz and harmonics) suppression. CLP series units are designed to be attached over a CA025/035 series standalone adapter and several units can be bundled over each other. Therefore alternative module combinations can be provided for either single channel, 4-channel or even 8- channel video modem operation. All connection cables needed between video modem and CLP unit(s) are included in the package. All the wires/ cables needed between external devices and CLP units can be easily connected to blocks of screw terminal connectors at the top of the unit. For camera/ video connections units are provided with isolated BNC connectors. Temperature hardened ( C). CLP000 CLP/CA mounting adapter for old CAs For installation over old CA021/031 CLP001 One channel video coil and line protection unit, cables included For CRT161/191 CLP002 Line protection unit, cables included For CRT432/461/491 & CRT861/891 CLP003 Four channel video coil unit, channels 1...4, cables included For CRT432/461/491 & CRT861/891 CLP004 Four channel video coil unit, channels 5...8, cables included For CRT861/891 CLP005 Line protection unit for RJ-45 Ethernet interface only For all CFO cards with Ethernet Bridge CFO Accessories 15

16 OPS132 patch caple/splitter. ultimode fibre patch cords and accessories Fibre patch cords for fibre terminals, with connectors pre-installed on both ends, for CFO multimode fibre (F) optic systems. OPS122 2 x LC/PC SC/PC F patch cord with splitter, 50%/50% OPUS1EDD0200I SC/PC SC/PC patch cord, 2.0m For CFO331 OPUS1EPP0200IA ST ST F patch cord, 2.0m For CFO100 Coverage 850 & 1310nm OPUS1EDN0200DA Dual SC/PC LC/UPC patch cord, 2.0m For CFO432 or F OPUS1ENN0200DA Dual LC/UPC LC/UPC patch cord, 2.0m For CFO432 or F Single-mode fibre patch cords and accessories Fibre patch cords for fibre terminals, with connectors pre-installed on both ends, for CFO single-mode fibre (SF) optic systems. OPA101 SC/APC SC/A PC adapter For cable extensions (SF) OPA112 SC/APC SC/APC SF patch cord, 2.0m Angled PC (green)/angled PC (green) OPA122 SC/APC FC/PC SF patch cord, 2.0m Angled PC (green)/pc (blue) OPA132 SC/APC LC/UPC SF patch cord 2.0m Angled PC (green)/ultra PC (blue) OPS132 2 x LC/UPC SC/APC SF patch cord with splitter Broadband (1310nm & CWD) OPT211 FC/PC FC/PC SF patch cord, 2.0m Old CFO units with FC/PC optics SC/APC SC/APC SF patch cord, 5.0m Angled PC (green)/angled PC (green) SC/APC SC/UPC SF patch cord, 2.0m Angled PC (green)/ultra PC (blue) SC/APC SC/UPC SF patch cord, 5.0m Angled PC (green)/ultra PC (blue) SC/UPC SC/UPC SF patch cord, 2.0m Ultra PC (blue)/ultra PC (blue) SC/UPC SC/UPC SF patch cord, 5.0m Ultra PC (blue)/ultra PC (blue) SC/UPC LC/UPC SF patch cord, 2.0m Ultra PC (blue)/ultra PC (blue) SC/UPC LC/UPC SF patch cord, 5.0m Ultra PC (blue)/ultra PC (blue) Dual SC/UPC LC/UPC SF patch cord, 2.0m Ultra PC (blue)/ultra PC (blue) Dual SC/UPC LC/UPC SF patch cord, 5.0m Ultra PC (blue)/ultra PC (blue) Dual LC/UPC LC/UPC SF patch cord, 2.0m Ultra PC (blue)/ultra PC (blue) Dual LC/UPC LC/UPC SF patch cord, 5.0m Ultra PC (blue)/ultra PC (blue) SC/APC 2dB ±15% plug-in type SC/APC 5dB ±15% plug-in type Optical attenuator, SF SC/APC 7dB ±10% plug-in type SC/APC 10dB ±15% plug-in type SC/APC 15dB ±15% plug-in type Connection cables, data, audio and management cables for CFO fibre optic systems. CIC301 CIC303 CIC505 cable, BNC-BNC (male), mini-coax anagement interface adapter 13.5cm 50cm For CFOx61/x71 series and CEV/OPX range CIC603 RJ-45 open wires, 2.0m Data cable CIC604 RJ-45 RJ-45 (CRX918 only), 1.0m CIC702 20cm CIC705 50cm CIC707 CAT5 FTP Ethernet cable RJ-45, direct connected 70cm CIC m CIC m 16 CFO Accessories

17 CFO product overview channels Camera type Fibre type Optics type Distance (max) Product name Features CFO First ile series with optics 4 Fixed F SF 550m/2km 20/40km CFO410 video only 8 Fixed F SF 550m/2km 20/40km CFO810 video only 4 PTZ F SF 2km 20/40km CFO420 < > 1 x data 8 PTZ F SF 2km 20/40km CFO820 < > 1 x data 1 PTZ F SF 550m/2km 20/40km CFO160 < > 3 x data, 2 x audio, 3/2 x cc, 1 x Fast Ethernet Bridge 4 PTZ F SF 2km 20/40km CFO460 < > 3 x data, 2 x audio, 3/2 x cc, 1 x Fast Ethernet Bridge CFO First ile series with fixed optics 1 (3*) Fixed F Fixed 6.5km CFO100 > 1 x video only (*CFO103 = triple channel) 1 PTZ F Fixed 5km CFO331 < > 1 x data, 1 x contact closure 1 PTZ SF Fixed 40km CFO521 < > 1 x data, 1 x contact closure 1 PTZ SF Fixed 50km CFO161 < > 3 x data, 2 x audio, 1 x contact closure, 1 x Fast Ethernet Bridge, SNP 1 PTZ SF (WD) 4 PTZ F (x2) Fixed 60km CFO191 < > 3 x data, 2 x audio, 1 x contact closure, 1 x Fast Ethernet Bridge, SNP Fixed 1.5km CFO432 < > 3 x data, 2 x audio, 1 x contact closure, 1 x Fast Ethernet Bridge, SNP 4 PTZ SF Fixed 50km CFO461 < > 3 x data, 2 x audio, 1 x contact closure, 1 x Fast Ethernet Bridge, SNP 4 PTZ SF (WD) Fixed 60km CFO491 < > 3 x data, 2 x audio, 1 x contact closure, 1 x Fast Ethernet Bridge, SNP 8 PTZ SF Fixed 50km CFO861 < > 3 x data, 2 x audio, 1 x contact closure, 1 x Fast Ethernet Bridge, SNP 8 PTZ SF (WD) Fixed 60km CFO891 < > 3 x data, 2 x audio, 1 x contact closure, 1 x Fast Ethernet Bridge, SNP CFO OPX CWD optical multiplexing Fixed or PTZ * by using optical repeators SF (CWD) Fixed ~200km* OPX > Number of data/audio/contact closure channels < > Number of data/audio/contact closure/fast Ethernet channels, SNP CFO Accessories Selection of various optics for Gigabit Ethernet (F, SF) COR series optical repeaters for long haul CWD & 1310 nm operation CO series optical switch for various redundancy and re-routing requirements CLP line protection modules for CFO stand-alone installations which provides overvoltage protection and mains hum suppression Various active and passive components to support fluent installation and system operation either for rack mount or stand-alone settings CFO Product Overview 17

18 CFO OPX point-to-point system 56 x Cam (TX Ch11) (1470nm) (TX Ch12) (1490nm) (TX Ch13) (1510nm) (RX Ch11) (1470nm) (RX Ch12) (1490nm) (RX Ch13) (1510nm) atrix Keyboard & Joystick Control PTZ Audio Remote CTRL IP devices (TX Ch14) (1530nm) (TX Ch15) (1550nm) (TX Ch16) (1570nm) 8 CHANNEL UX/DEUX 8 CHANNEL UX/DEUX (RX Ch14) (1530nm) (RX Ch15) (1550nm) (RX Ch16) (1570nm) 56 x on PTZ Audio Remote CTRL DVR (TX Ch17) (1590nm) (RX Ch17) (1590nm) IP devices 8 x on (RX Ch18) (1610nm) (TX Ch18) (1610nm) 8 x Any other 1310nm system Any other 1310nm system CFO OPX add-drop system CRT861 (1310nm) 8 x Data Audio IP device 8 x Cam PTZ Audio 16 x Cam PTZ Audio Remote CTRL IP devices (TX Ch11) (1470nm) (TX Ch12) (1490nm) (TX Ch13) (1510nm) Ethernet Switch (1530nm) 4 Ch UX/ DEUX Remote CTRL (TX Ch15) (1550nm) ADD/ DROP Audio PTZ 16 x Cam (TX Ch16) (1570nm) ADD/ DROP EASI P-X Encoders 4 Ch (RX Ch17) (1590nm) ADD/ DROP 4 x on Data 4 Ch (RX Ch18) (1610nm) ADD/ DROP Audio 8 Ch UX/ DEUX (RX Ch11) (1470nm) (RX Ch12) (1490nm) (RX Ch13) (1510nm) Ethernet Switch (1530nm) (RX Ch15) (1550nm) (RX Ch16) (1570nm) atrix Keyboard & Joystick Control 40 x on PTZ Audio Remote CTRL IP devices 8 x on Data Audio CRR861 (1310nm) CEV 4 Ch (TX Ch17) (1590nm) CEV 4 Ch (TX Ch18) (1610nm) EASI P-X Decoders 4 x Data Audio 18 CFO OPX point-to-point system & add-drop system

19 CFO applications 1 or 4 x SD video in 3 x RS data, duplex 2 x Audio, 2-way 2/3 x CC I/O 1 x Ethernet Bridge transmitter Depending on : F up to 2 km SF up to 110 km Single LC or dual LC receiver 1 or 4 x SD video out 3 x RS data, duplex 2 x Audio, 2-way 2/3 x CC I/O 1 x Ethernet Bridge CFO160 & or 8 x SD video in 1 x RS data, duplex transmitter Depending on : F up to 2 km SF up to 110 km Single LC or dual LC receiver 4 or 8 x SD video out 1 x RS data, duplex CFO420 & or 8 x SD video in transmitter Depending on : F up to 2 km SF up to 110 km Single LC or dual LC receiver 4 or 8 x SD video out CFO410 & x SD video in transmitter Fixed optics: F up to 6 km Single ST receiver 1 x SD video out CFO100 1 x SD video in 1 x RS data, duplex 1 x CC I/O transmitter Depending on fixed optics: F up to 5 km SF up to 40 km Single SC/PC receiver 1 x SD video out 1 x RS data, duplex 1 x CC I/O CFO331 & 521 1, 4 or 8 x SD video in 3 x RS data, duplex 2 x Audio, 2-way 1 x CC I/O, 2-way 1 x Ethernet Bridge anaged, CLI, SNP transmitter Depending on fixed optics: F up to 2 km SF up to 50/60 km Single SC/APC or dual LC receiver 1, 4 or 8 x SD video out 3 x RS data, duplex 2 x Audio, 2-way 1 x CC I/O, 2-way 1 x Ethernet Bridge anaged, CLI, SNP CFO161, 191, 432, 461, 491, 861 & or 8 x SD video in 3 x RS data, duplex 2 x Audio, 2-way 1 x CC I/O, 2-way 1 x Ethernet Bridge anaged, CLI, SNP 4 or 8 x SD video in 3 x RS data, duplex 2 x Audio, 2-way 1 x CC I/O, 2-way 1 x Ethernet Bridge anaged, CLI, SNP transmitter 1. transmitter 7 Fixed CWD optics 1 Fixed CWD optics 7 UX/ ADD/ DEUX DROP 4 or 8 x SD video in 3 x RS data, duplex 2 x Audio, 2-way 1 x CC I/O, 2-way 1 x Ethernet Bridge anaged, CLI, SNP 4 or 8 x SD video in 3 x RS data, duplex 2 x Audio, 2-way 1 x CC I/O, 2-way 1 x Ethernet Bridge anaged, CLI, SNP ADD/ DROP Fixed CWD optics 8 transmitter 8 transmitter 9 Fixed CWD optics 9 ADD/ DROP UX/ ADD/ DEUX DROP Fixed CWD optics 1 Fixed CWD optics 9 CFO OPX receiver 1. receiver 9 4 or 8 x SD video out 3 x RS data, duplex 2 x Audio, 2-way 1 x CC I/O, 2-way 1 x Ethernet Bridge anaged, CLI, SNP 4 or 8 x SD video out 3 x RS data, duplex 2 x Audio, 2-way 1 x CC I/O, 2-way 1 x Ethernet Bridge anaged, CLI, SNP CFO applications 19

20 Teleste is an international technology group founded in 1954, specialized in broadband video and data communication systems and services. Security and Information, as one of the business units of Teleste s operations, has long experience of creating value-added security solutions for its customers using fibre optics and increasingly digital and IP networks. A clear advantage in Teleste s offering is the synergy created by its expertise in broadband cable allied to a strong showing in video security. As Legacy CCTV systems have begun the technology shift towards digital and IP networks, Teleste Security and Information aims to be at the forefront of developments. With all the various technologies required for legacy, hybrid and new CCTV systems at its disposal Teleste is able to ensure smooth migration and system integration for anyone in need. Contacts Finland, Turku Teleste Headquarters, Sales Nordic, Baltic, Russia & Kuwait Tel Fax info.vs@teleste.com Australia, urarrie Teleste Australia, Sales Australia Tel Dubai, UAE Teleste FZ LLC, Sales iddle East Tel France, Paris Teleste SAS, Sales France, Belgium & Italy Tel Fax Germany, Hildesheim Teleste Germany, Sales Germany, Austria, Switzerland Tel Fax Poland, Krakow Teleste Networks Sp. Z o.o, Sales CEE Tel Fax Spain, Barcelona Teleste Spain, Sales Spain, Portugal, North Africa and iddle East Tel Sweden, Stockholm Teleste Sweden AB, Sales Scandinavia Tel Fax Thailand, Nonthaburi Teleste Thailand, Sales APAC Tel. +66 (0) United Kingdom, Fareham Teleste UK, Sales UK & South Africa Tel. +44 (0) USA, Austin TX Teleste LLC, Sales US & Americas Tel Fax P5P_CFO Copyright 2015 Teleste Corporation. All rights reserved. TELESTE is a registered trademark of Teleste Corporation.