12-BIT PARITY GENERATOR/CHECKER
|
|
- Derek Hill
- 6 years ago
- Views:
Transcription
1 2-BIT PAIT GEATO/CHECKE FEATUES DESCIPTION Provides odd-high parity of 2 inputs Extended 00E VEE range of 4.2V to 5.5V Output register with Shift/Hold capability 900ps max. D to, / output Enable control Asynchronous egister eset Differential outputs Fully compatible with industry standard 0KH, 00K ECL levels Internal 75KΩ input pulldown resistors Fully compatible with Motorola MC0E/00E60 Available in 28-pin PLCC package BLOCK DIAGAM D0 D D2 D3 The S0/00E60 are high-speed, 2-bit parity generator/checkers with differential outputs, for use in new, high-performance ECL systems. The output takes on a logic HIGH value only when an odd number of inputs are at a logic HIGH. A logic HIGH on the enable input () forces the output to a logic LOW. An additional feature of the E60 is the output register. Two multiplexers and their associated signals control the register input by providing the option of holding present data, loading the new parity data or shifting external data in. To hold the present data, the Hold signal () must be at a logic LOW level. If the signal is at a logic HIGH, the data present at the output is passed through the first multiplexer. Taking the Shift signal () to a logic HIGH will shift the data at the pin into the output register. If the signal is at a logic LOW, the output of the first multiplexer is then passed through to the register. The register itself is clocked on the rising edge of CLK or CLK2 (or both). The presence of a logic HIGH on the reset pin () forces the register output to a logic LOW. D4 D5 D6 D7 D8 D9 D0 D 0 MUX SEL 0 MUX SEL D CLK CLK2 ev.: F Amendment: /0 Issue Date: March 2006
2 PACKAGE/ODEING INFOMATION D5 D6 D7 VEE D D4 D3 D2 D D PLCC TOP VIEW J VCC Ordering Information () Package Operating Package Lead Part Number Type ange Marking Finish JC J28- Commercial JC Sn-Pb JCT (2) J28- Commercial JC Sn-Pb JC J28- Commercial JC Sn-Pb JCT (2) J28- Commercial JC Sn-Pb D9 D D CLK CLK2 3 2 NC JZ (3) J28- Commercial JZ with Matte-Sn JZT (2, 3) J28- Commercial JZ with Matte-Sn JZ (3) J28- Commercial JZ with Matte-Sn 28-Pin PLCC (J28-) JZT (2, 3) J28- Commercial JZ with Matte-Sn Notes:. Contact factory for die availability. Dice are guaranteed at T A = 25 C, DC Electricals only. 2. Tape and eel. 3. Pb-Free package is recommended for new designs. 2
3 PIN NAMES TUTH TABLE Pin Function D0 D Data Inputs Serial Data Input Enable, active LOW Hold, active LOW Shift, active HIGH CLK, CLK2 Clock Inputs eset Input, Direct Output, egister Output VCC to Output Number of HIGH Inputs Even Odd Output LOW HIGH DC ELECTICAL CHAACTEISTICS VEE = VEE (Min.) to VEE (Max.); VCC = = GND TA = 0 C TA = +25 C TA = +85 C Symbol Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit Condition IIH Input HIGH Current µa CLK, CLK All Other Inputs IEE Power Supply Current ma 0E E
4 AC ELECTICAL CHAACTEISTICS VEE = VEE (Min.) to VEE (Max.); VCC = = GND TA = 0 C TA = +25 C TA = +85 C Symbol Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit Condition tpd Propagation Delay to Output ps D to to CLK to to ts Set-up Time ps D th Hold Time ps D tr ise/fall Time ps tf 20% to 80% 4
5 28-PIN PLCC (J28-) ev. 03 MICEL, INC. 280 FOTUNE DIVE SAN JOSE, CA 953 USA TEL + (408) FAX + (408) WEB The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale Micrel, Incorporated. 5
4-BIT PARALLEL-TO-SERIAL CONVERTER
4-BIT PARALLEL-TO-SERIAL CONVERTER FEATURES DESCRIPTION On-chip clock 4 and 8 Extended 00E VEE range of 4.2V to 5.5V.6Gb/s typical data rate capability Differential clock and serial inputs VBB output for
More informationDIFFERENTIAL CLOCK D FLIP-FLOP
IFFEENTIAL CLOCK FLIP-FLOP FEATUES ESCIPTION 475ps propagation delay 2.8GHz toggle frequency Internal 75KΩ input pull-down resistors Available in 8-pin SOIC package The SY10/100EL51 are differential clock
More information3-BIT 4:1 MUX-LATCH SY10E256 SY100E256 DESCRIPTION FEATURES PIN NAMES BLOCK DIAGRAM
3-BIT 4:1 MUX-LATCH FATURS SCRIPTION 950ps max. data to output xtended 100 V range of 4.2V to 5.5V 850ps max. latch enable to output Separate select controls ifferential outputs Fully compatible with industry
More informationNOT RECOMMENDED FOR NEW DESIGNS ( 1, 2/3) OR ( 2, 4/6) CLOCK GENERATION CHIP
NOT RECOMMENDED FOR NEW DESIGNS (, 2/3) OR ( 2, 4/6) CLOCK GENERATION CHIP FEATURES 3.3V and 5V power supply options 50ps output-to-output skew Synchronous enable/disable Master Reset for synchronization
More information3-Channel 8-Bit D/A Converter
FUJITSU SEMICONDUCTOR DATA SHEET DS04-2316-2E ASSP 3-Channel -Bit D/A Converter MB409 DESCRIPTION The MB409 is an -bit resolution ultra high-speed digital-to-analog converter, designed for video processing
More informationSMPTE-259M/DVB-ASI Scrambler/Controller
SMPTE-259M/DVB-ASI Scrambler/Controller Features Fully compatible with SMPTE-259M Fully compatible with DVB-ASI Operates from a single +5V supply 44-pin PLCC package Encodes both 8- and 10-bit parallel
More information74F273 Octal D-Type Flip-Flop
Octal D-Type Flip-Flop General Description The 74F273 has eight edge-triggered D-type flip-flops with individual D inputs and Q outputs. The common buffered Clock (CP) and Master Reset (MR) inputs load
More informationV6118 EM MICROELECTRONIC - MARIN SA. 2, 4 and 8 Mutiplex LCD Driver
EM MICROELECTRONIC - MARIN SA 2, 4 and 8 Mutiplex LCD Driver Description The is a universal low multiplex LCD driver. The version 2 drives two ways multiplex (two blackplanes) LCD, the version 4, four
More informationMT8806 ISO-CMOS 8x4AnalogSwitchArray
MT886 ISO-CMOS 8x4AnalogSwitchArray Features Internal control latches and address decoder Short set-up and hold times Wide operating voltage: 4.5 V to 3.2 V 2Vpp analog signal capability R ON 65 max. @
More informationLMH0002 SMPTE 292M / 259M Serial Digital Cable Driver
SMPTE 292M / 259M Serial Digital Cable Driver General Description The SMPTE 292M / 259M serial digital cable driver is a monolithic, high-speed cable driver designed for use in SMPTE 292M / 259M serial
More informationST2225A. LED Display Driver. Version : A.025 Issue Date : 2001/11/26 File Name Total Pages : 12. : SP-ST2225A-A.025.doc
Version : A.025 Issue Date : 2001/11/26 File Name Total Pages : 12 : SP--A.025.doc LED Display Driver 新竹市科學園區展業㆒路 9 號 7 樓之 1 9-7F-1, Prosperity Road I, Science Based Industrial Park, Hsin-Chu, Taiwan 300,
More informationSN54273, SN54LS273, SN74273, SN74LS273 OCTAL D-TYPE FLIP-FLOP WITH CLEAR
OCTAL D-TYPE FLIP-FLOP WITH CLEA SDLS090 OCTOBE 9 EVISED MACH 9 Contains Eight Flip-Flops With Single-ail Outputs Buffered Clock and Direct Clear Inputs Individual Data Input to Each Flip-Flop Applications
More informationMT x 12 Analog Switch Array
MT885 8 x 2 Analog Switch Array Features Internal control latches and address decoder Short set-up and hold times Wide operating voltage: 4.5V to 3.2V 2Vpp analog signal capability R ON 65 max. @ V DD
More informationASNT8142-KMC Generator of DC-to-23Gbps PRBS with Selectable Polynomials
ASNT8142-KMC Generator of DC-to-23Gbps PRBS with Selectable Polynomials Full-length (2 15-1) or (2 7-1) pseudo-random binary sequence (PRBS) generator Selectable power of the Polynomial DC to 23Gbps output
More informationNT Output LCD Segment/Common Driver NT7701. Features. General Description. Pin Configuration 1 V1.0
160 Output LCD Segment/Common Driver Features (Segment mode)! Shift Clock frequency : 14 MHz (Max.) (VDD = 5V ± 10%) 8 MHz (Max.) (VDD = 2.5V - 4.5V)! Adopts a data bus system! 4-bit/8-bit parallel input
More informationDM74LS377 Octal D-Type Flip-Flop with Common Enable and Clock
October 1988 Revised March 2000 DM74LS377 Octal D-Type Flip-Flop with Common Enable and Clock General Description The DM74LS377 is an 8-bit register built using advanced low power Schottky technology.
More informationHMC-C060 HIGH SPEED LOGIC. 43 Gbps, D-TYPE FLIP-FLOP MODULE. Features. Typical Applications. General Description. Functional Diagram
HMC-C Features Typical Applications The HMC-C is ideal for: OC-78 and SDH STM-25 Equipment Serial Data Transmission up to 43 Gbps Digital Logic Systems up to 43 Gbps Broadband Test and Measurement Functional
More informationASNT8140. ASNT8140-KMC DC-23Gbps PRBS Generator with the (x 7 + x + 1) Polynomial. vee. vcc qp. vcc. vcc qn. qxorp. qxorn. vee. vcc rstn_p.
ASNT8140-KMC DC-23Gbps PRBS Generator with the (x 7 + x + 1) Polynomial Full-length (2 7-1) pseudo-random binary sequence (PRBS) generator DC to 23Gbps output data rate Additional output delayed by half
More informationLED Driver IC IK2108A TECHNICAL DATA. Description
TECHNICAL DATA LED Driver IC IK2108A Description The IK2108A are anode-grid LED display drives 5.0V~18.0V with output size 8 digits x 14 segments to 12 digits x 10 segments and addition key scan function.
More informationPALCE26V12 Family. 28-Pin EE CMOS Versatile PAL Device DISTINCTIVE CHARACTERISTICS GENERAL DESCRIPTION FINAL COM L: H-7/10/15/20 IND: H-10/15/20
FINAL COM L: H-7//5/2 IND: H-/5/2 PALCE26V2 Family 28-Pin EE CMOS Versatile PAL Device DISTINCTIVE CHACTERISTICS 28-pin versatile PAL programmable logic device architecture Electrically erasable CMOS technology
More informationSN54273, SN54LS273, SN74273, SN74LS273 OCTAL D-TYPE FLIP-FLOP WITH CLEAR
OCTAL D-TYPE FLIP-FLOP WITH CLEA SDLS090 OCTOBE 1976 EVISED MACH 1988 Contains Eight Flip-Flops With Single-ail Outputs Buffered Clock and Direct Clear Inputs Individual Data Input to Each Flip-Flop Applications
More informationML6428. S-Video Filter and 75Ω Line Drivers with Summed Composite Output. Features. General Description. Block Diagram Σ BUFFER.
www.fairchildsemi.com ML S-Video Filter and Line Drivers with Summed Composite Output Features.MHz Y and C filters, with CV out for NTSC or PAL cable line driver for Y, C, CV, and TV modulator db stopband
More informationMT8814AP. ISO-CMOS 8 x 12 Analog Switch Array. Features. -40 to 85 C. Description. Applications
MT884 8 x 2 Analog Switch Array Features Internal control latches and address decoder Short set-up and hold times Wide operating voltage: 4.5 to 3.2 2pp analog signal capability R ON 65Ω max. @ DD =2,
More informationPhotodiode Detector with Signal Amplification
107 Bonaventura Dr., San Jose, CA 95134 Tel: +1 408 432 9888 Fax: +1 408 432 9889 www.x-scanimaging.com Linear X-Ray Photodiode Detector Array with Signal Amplification XB8801R Series An X-Scan Imaging
More informationUSE GAL DEVICES FOR NEW DESIGNS
USE GAL DEVICES FOR NEW DESIGNS FINAL COM L: H-7//5/2 IND: H-/5/2 PALCE26V2 Family 28-Pin EE CMOS Versatile PAL Device DISTINCTIVE CHACTERISTICS 28-pin versatile PAL programmable logic device architecture
More informationMACH220-10/12/15/20. Lattice Semiconductor. High-Density EE CMOS Programmable Logic DISTINCTIVE CHARACTERISTICS GENERAL DESCRIPTION BLOCK DIAGRAM
FINAL COM L: -10/12/15/20 IND: -14/18/24 MACH220-10/12/15/20 High-Density EE CMOS Programmable Logic Lattice Semiconductor DISTINCTIVE CHARACTERISTICS 8 Pins 9 10 ns tpd 100 MHz fcnt 5 Inputs with pull-up
More informationMACH130-15/20. Lattice/Vantis. High-Density EE CMOS Programmable Logic
FINAL COM L: -15/20 IND: -18/24 MACH130-15/20 High-Density EE CMOS Programmable Logic Lattice/Vantis DISTINCTIVE CHARACTERISTICS 84 Pins 64 cells 15 ns tpd Commercial 18 ns tpd Industrial 66.6 MHz fcnt
More informationASNT_PRBS20B_1 18Gbps PRBS7/15 Generator Featuring Jitter Insertion, Selectable Sync, and Output Amplitude Control
ASNT_PRBS20B_1 18Gbps PRBS7/15 Generator Featuring Jitter Insertion, Selectable Sync, and Output Amplitude Control Broadband frequency range from 20Mbps 18.0Gbps Minimal insertion jitter Fast rise and
More informationDM Segment Decoder/Driver/Latch with Constant Current Source Outputs
DM9368 7-Segment Decoder/Driver/Latch with Constant Current Source Outputs General Description The DM9368 is a 7-segment decoder driver incorporating input latches and constant current output circuits
More informationMC54/74F568 MC54/74F569 4-BIT BIDIRECTIONAL COUNTERS (WITH 3-STATE OUTPUTS) 4-BIT BIDIRECTIONAL COUNTERS (WITH 3-STATE OUTPUTS)
4-BIT BIDIRECTIONAL COUNTERS (WITH 3-STATE OUTPUTS) The MC54/ 74F568 and MC54/74F569 are fully synchronous, reversible counters with 3-state outputs. The F568 is a BCD decade counter; the F569 is a binary
More information74F377 Octal D-Type Flip-Flop with Clock Enable
74F377 Octal D-Type Flip-Flop with Clock Enable General Description The 74F377 has eight edge-triggered, D-type flip-flops with individual D inputs and Q outputs. The common buffered Clock (CP) input loads
More informationUNISONIC TECHNOLOGIES CO., LTD 89CXX/89NXX Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD 89CXX/89NXX Preliminary CMOS IC LOW OLTAGE FREE DELAY TIME SETTING OLTAGE DETECTOR IC SERIES DESCRIPTION UTC 89CXX and 89NXX series are adjustable output delay oltage Detector
More informationNT Output LCD Segment/Common Driver. Features. General Description. Pin Configuration 1 V1.0 NT7702
240 Output LCD Segment/Common Driver Features (Segment mode)! Shift Clock frequency: 20 MHz (Ma.) (VDD = 5 V ± 10%)! Adopts a data bus system! 4-bit/8-bit parallel input modes are selectable with a mode
More informationRST RST WATCHDOG TIMER N.C.
19-3899; Rev 1; 11/05 Microprocessor Monitor General Description The microprocessor (µp) supervisory circuit provides µp housekeeping and power-supply supervision functions while consuming only 1/10th
More information74LVQ374 Low Voltage Octal D-Type Flip-Flop with 3-STATE Outputs
74LVQ374 Low Voltage Octal D-Type Flip-Flop with 3-STATE Outputs General Description The LVQ374 is a high-speed, low-power octal D-type flip-flop featuring separate D-type inputs for each flip-flop and
More informationMicrel, Inc All rights reserved
KSZ8041NL 10Base-T/100Base-TX Physical Layer Transceiver Evaluation Board User s Guide Revision 1.1 / May 2007 Micrel, Inc. 2007 All rights reserved Micrel is a registered trademark of Micrel and its subsidiaries
More informationSA9504 Dual-band, PCS(CDMA)/AMPS LNA and downconverter mixers
INTEGRATED CIRCUITS Supersedes data of 1999 Aug 4 1999 Oct 8 DESCRIPTION The is an integrated receiver front-end for 900 MHz Cellular (AMPS) and 1.9 GHz PCS (CDMA) phones. This dual-band receiver circuit
More informationUltraLogic 128-Macrocell ISR CPLD
256 PRELIMINARY Features 128 macrocells in eight logic blocks In-System Reprogrammable (ISR ) JTAG-compliant on-board programming Design changes don t cause pinout changes Design changes don t cause timing
More informationGENLINX II GS9032 Digital Video Serializer
GENLINX II GS932 Digital Video Serializer FEATUES SMPTE 259M and 54Mb/s compliant serializes 8-bit or 1-bit data autostandard, adjustment free operation minimal external components (no loop filter components
More informationDC-6.0 GHz 1.0W Packaged HFET
Features 46. dbm OIP3 @.8 GHz 1. db Gain @ 2 GHz.0 db Gain @ 6 GHz 30.0 dbm P1dB SOT-89 Package Functional Block Diagram General Description The X is a high linearity Hetrojunction Field Effect Transistor
More informationMT8812 ISO-CMOS. 8 x 12 Analog Switch Array. Features. Description. Applications
MT882 8 x 2 Analog Switch Array Features Internal control latches and address decoder Short set-up and hold times Wide operating voltage: 4.5V to 4.5V 4Vpp analog signal capability R ON 65 max. @ V DD
More informationFeatures. For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
HMC-C1 Typical Applications The HMC-C1 is ideal for: OC-78 and SDH STM-25 Equipment Serial Data Transmission up to 5 Gbps Short, intermediate, and long haul fiber optic applications Broadband Test and
More informationLMH0344 3Gbps HD/SD SDI Adaptive Cable Equalizer
3Gbps HD/SD SDI Adaptive Cable Equalizer General Description The 3Gbps HD/SD SDI Adaptive Cable Equalizer is designed to equalize data transmitted over cable (or any media with similar dispersive loss
More informationDP8212 DP8212M 8-Bit Input Output Port
DP8212 DP8212M 8-Bit Input Output Port General Description The DP8212 DP8212M is an 8-bit input output port contained in a standard 24-pin dual-in-line package The device which is fabricated using Schottky
More informationDM Segment Decoder Driver Latch with Constant Current Source Outputs
DM9368 7-Segment Decoder Driver Latch with Constant Current Source Outputs General Description The DM9368 is a 7-segment decoder driver incorporating input latches and constant current output circuits
More informationHMC-C064 HIGH SPEED LOGIC. 50 Gbps, XOR / XNOR Module. Features. Typical Applications. General Description. Functional Diagram
HMC-C4 Features Typical Applications The HMC-C4 is ideal for: OC-78 and SDH STM-25 Equipment Serial Data Transmission up to 5 Gbps Digital Logic Systems up to 5 Gbps Broadband Test and Measurement Functional
More informationGS4882, GS4982 Video Sync Separators with 50% Sync Slicing
GS488, GS498 Video Sync Separators with 50% Sync Slicing DATA SHEET FEATUES precision 50% sync slicing internal color burst filter ±5 ns temperature stability superior noise immunity robust signal detection/output
More informationChapter 2. Digital Circuits
Chapter 2. Digital Circuits Logic gates Flip-flops FF registers IC registers Data bus Encoders/Decoders Multiplexers Troubleshooting digital circuits Most contents of this chapter were covered in 88-217
More informationDATA SHEET. NEC's WIDE BAND SINGLE CONTROL CMOS SPDT SWITCH PART NUMBER PACKAGE MARKING SUPPLYING FORM
DATA SHEET FEATURES NEC's WIDE BAND SINGLE CONTROL CMOS SPDT SWITCH SUPPLY VOLTAGE : 1.8 to 3.3 V (2.8 V TYP.) SINGLE SWITCH CONTROL VOLTAGE: Vcont (H) = 1.8 to 3.3 V (2.8 V TYP.) Vcont (L) = 0.2 to +0.2
More informationALS-PDIC17-77C/TR8. Surface - Mount Ambient Light Sensor. Features. Description. Applications
Features Close responsively to the human eye spectrum Light to Current, analog output Good output linearity across wide illumination range Low sensitivity variation across various light sources Operating
More informationADC0804C, ADC BIT ANALOG-TO-DIGITAL CONVERTERS WITH DIFFERENTIAL INPUTS
8-Bit esolution atiometric Conversion 100-µs Conversion Time 135-ns Access Time No Zero Adjust equirement On-Chip Clock Generator Single 5-V Power Supply Operates With Microprocessor or as Stand-Alone
More informationCDK3402/CDK bit, 100/150MSPS, Triple Video DACs
CDK3402/CDK3403 8-bit, 100/150MSPS, Triple Video DACs FEATURES n 8-bit resolution n 150 megapixels per second n ±0.2% linearity error n Sync and blank controls n 1.0V pp video into 37.5Ω or load n Internal
More informationMaintenance/ Discontinued
A/D, D/C Converters for Image Signal Processing MN6570F, MN6570TF, and MN6570EF Low Power 8-Bit, 3-Channel CMOS D/A Converters for Image Processing Overview The MN6570F, MN6570TF, and MN6570EF are highspeed
More informationModular DAA with 2/4 Wire Convertor. XE0002D Block Diagram
XE0002D August 2005 Modular DAA with 2/4 Wire Convertor Description The XE0002D is a compact DAA module designed for applications requiring voice, data or fax transfer. It complies with FCC Part 68 rules
More information74F574 Octal D-Type Flip-Flop with 3-STATE Outputs
74F574 Octal D-Type Flip-Flop with 3-STATE Outputs General Description The F574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The
More informationHMC958LC5 HIGH SPEED LOGIC - SMT. Typical Applications. Features. Functional Diagram. General Description
Typical Applications Features The HMC958LC5 is ideal for: SONET OC-192 and 1 GbE 16G Fiber Channel 4:1 Multiplexer Built-In Test Broadband Test & Measurement Functional Diagram Supports High Data Rates:
More information3 Flip-Flops. The latch is a logic block that has 2 stable states (0) or (1). The RS latch can be forced to hold a 1 when the Set line is asserted.
3 Flip-Flops Flip-flops and latches are digital memory circuits that can remain in the state in which they were set even after the input signals have been removed. This means that the circuits have a memory
More informationUltraLogic 128-Macrocell Flash CPLD
fax id: 6139 CY7C374i Features UltraLogic 128-Macrocell Flash CPLD Functional Description 128 macrocells in eight logic blocks 64 pins 5 dedicated inputs including 4 clock pins In-System Reprogrammable
More informationMaintenance/ Discontinued
A/D, D/C Converters for Image Signal Processing MN657011H Low Power 8-Bit, 3-Channel CMOS D/A Converter for Image Processing Overview The MN657011H is an 8-bit, 3-channel CMOS digitalto-analog converter
More informationFEATURES DESCRIPTION APPLICATION BLOCK DIAGRAM. PT6311 VFD Driver/Controller IC
VFD Driver/Controller IC DESCRIPTION PT6311 is a Vacuum Fluorescent Display (VFD) Controller driven on a 1/8 to 1/16 duty factor housed in 52-pin plastic LQFP Package. Twelve segment output lines, 8 grid
More informationMaintenance/ Discontinued
A/D, D/C Converters for Image Signal Processing MN65531AS Low Power 6-Bit CMOS A/D Converter for Image Processing Overview The MN65531AS is a totally parallel 6-bit CMOS analog-to-digital converter with
More informationProsumer Video Cable Equalizer
Prosumer Video Cable Equalizer Features Multi rate adaptive equalization Operates from 143 to 1485 Mbps serial data rate SMPTE 292M, SMPTE 344M, and SMPTE 259M compliant Supports DVB-ASI at 270 Mbps Cable
More informationZLNB101 DUAL POLARISATION SWITCH TWIN LNB MULTIPLEX CONTROLLER ISSUE 1- JANUARY 2001 DEVICE DESCRIPTION FEATURES APPLICATIONS
DUAL POLARISATION SWITCH TWIN LNB MULTIPLEX CONTROLLER ISSUE - JANUARY 00 ZLNB0 DEICE DESCRIPTION The ZLNB0 dual polarisation switch controller is one of a wide range of satellite receiver LNB support
More information1550 nm / 3 Gb/s Medium Power Single Optical SM Digital Diagnostic Transmitter FVD2-1TR-SM50
1550 nm / 3 Gb/s Medium Power Single Optical SM Digital Diagnostic Transmitter FVD2-1TR-SM50 Features SMPTE 297-2006 Compatible Speed from 50 Mbps to 3Gbps with up to 50 km Single-mode Fiber Distance up
More informationLM8562. Digital Alarm Clock. Package Dimensions. Overview. Features. Specifications
Ordering number: EN 2658A PMOS LSI LM8562 Digital Alarm Clock Overview The LM8562 is a digital clock-use LSI having features such as easy setting, two alarms. Since the LM8562 is designed to be able to
More informationProduct Specification XFP 10G LR 20km LC Optical Transceiver
Product Specification 1. Features Supports 9.95Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 10km with SMF 1310nm Uncooled DFB laser XFP MSA package with duplex LC connector
More informationEVALUATION KIT AVAILABLE Multirate SMPTE SD/HD Cable Driver with Selectable Slew Rate TOP VIEW +3.3V. 10nF IN+ IN- MAX3812 SD/HD GND RSET +3.
19-3571; Rev ; 2/5 EVALUATION KIT AVAILABLE Multirate SMPTE SD/HD Cable Driver General Description The is a multirate SMPTE cable driver designed to operate at data rates up to 1.485Gbps, driving one or
More informationMAX7461 Loss-of-Sync Alarm
General Description The single-channel loss-of-sync alarm () provides composite video sync detection in NTSC, PAL, and SECAM standard-definition television (SDTV) systems. The s advanced detection circuitry
More informationTCP-3039H. Advance Information 3.9 pf Passive Tunable Integrated Circuits (PTIC) PTIC. RF in. RF out
TCP-3039H Advance Information 3.9 pf Passive Tunable Integrated Circuits (PTIC) Introduction ON Semiconductor s PTICs have excellent RF performance and power consumption, making them suitable for any mobile
More informationMaintenance/ Discontinued
CCD Delay Line Series MNS NTSC-Compatible CCD Video Signal Delay Element Overview The MNS is a CCD signal delay element for video signal processing applications. It contains such components as a shift
More informationLCD Segment Drivers Standard Segment Drivers BU9795AKV,BU9795AFV,BU9795AGUW,BU9794AKV,BU97950FUV Rev.A 1/14
LCD Segment Drivers Standard Segment Drivers BU9795AKV,BU9795AFV,BU9795AGUW,BU9794AKV,BU97950FUV No.10044EAT06 Description ROHM standard function segment series achieve UltraLow power consumption. Also
More informationGS1574 HD-LINX II Adaptive Cable Equalizer
GS1574 HD-LINX II Adaptive Cable Equalizer GS1574 Data Sheet Features SMPTE 292M, SMPTE 344M and SMPTE 259M compliant Automatic cable equalization Multi-standard operation from 143Mb/s to 1.485Gb/s Supports
More informationCWDM / 3 Gb/s Medium Power Optical SM Digital Diagnostic Transmitter/Receiver FVD2-1TR-SM30-XX
CWDM / 3 Gb/s Medium Power Optical SM Digital Diagnostic Transmitter/Receiver Features FVD2-1TR-SM30-XX SMPTE 297-2006 Compatible Speed from 50kbps to 3Gbps Power Budget > 15 db Support Video Pathological
More informationPart Number Transmitter Output Power Receiver Sensitivity Reach Temp DDM RoHS. Logic Symbol Name/Description Note 1 - GND Module Ground 1
Product Features Compliant with IEEE Std 802.3-2005 10Gb Ethernet 10GBase-BX XFP MSA Rev. 4.5 compliant Full digital diagnostic management interface XFP MSA package with Single LC receptacle optical Uncooled
More informationNCS2566. Six-Channel Video Driver with Triple SD & Triple Selectable SD/HD Filters
Six-Channel Video Driver with Triple SD & Triple Selectable SD/HD Filters The NCS2566 integrates reconstruction filters and video amplifiers. It s a combination of two 3 channel drivers the first one capable
More informationINTEGRATED CIRCUITS DATA SHEET. TDA4510 PAL decoder. Product specification File under Integrated Circuits, IC02
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC02 March 1986 GENERAL DESCRIPTION The is a colour decoder for the PAL standard, which is pin sequent compatible with multistandard decoder
More informationCLC011 Serial Digital Video Decoder
CLC011 Serial Digital Video Decoder General Description National s Comlinear CLC011, Serial Digital Video Decoder, decodes and descrambles SMPTE 259M standard Serial Digital Video datastreams with serial
More informationPower Supply and Watchdog Timer Monitoring Circuit ADM9690
a FEATURES Precision Voltage Monitor (4.31 V) Watchdog Timeout Monitor Selectable Watchdog Timeout 0.75 ms, 1.5 ms, 12.5 ms, 25 ms Two RESET Outputs APPLICATIONS Microprocessor Systems Computers Printers
More informationTMC3003 Triple Video D/A Converter 10 bit, 80 Msps
Triple Video D/A Converter 10 bit, 80 Msps www.fairchildsemi.com Features 10-bit resolution 80, 50, and 30 megapixels per second Sync and blank controls Sync on green D/A output 1.0V p-p video into 37.5Ω
More informationDATA SHEET. NEC's L-BAND 4W HIGH POWER SPDT SWITCH IC
DATA SHEET FEATURES LOW INSERTION LOSS: 0.40 db TYP. @ 1.0 GHz 0.50 db TYP. @ 2.0 GHz NEC's L-BAND 4W HIGH POWER SPDT SWITCH IC HIGH LINEARITY: 2f0, 3f0 = 70 dbc TYP. @ 1.0 GHz, Pin = +35 dbm 2f0, 3f0
More informationObsolete Product(s) - Obsolete Product(s)
OCTAL BUS TRANSCEIVER/REGISTER WITH 3 STATE OUTPUTS HIGH SPEED: f MAX = 60 MHz (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.)
More informationLow-Cost, 900MHz, Low-Noise Amplifier and Downconverter Mixer
19-193; Rev 1; 1/ EVALUATION KIT AVAILABLE Low-Cost, 9MHz, Low-Noise Amplifier General Description The s low-noise amplifier (LNA) and downconverter mixer comprise the major blocks of an RF front-end receiver.
More informationLM MHz RGB Video Amplifier System with OSD
LM1279 110 MHz RGB Video Amplifier System with OSD General Description The LM1279 is a full featured and low cost video amplifier with OSD (On Screen Display). 8V operation for low power and increased
More informationProduct Specification PE4151
PE UltraCMOS Low Frequency Passive Mixer with Integrated LO Amplifier Product Description The PE is an ultra-high linearity Quad MOSFET mixer with an integrated LO amplifier. The LO amplifier allows for
More informationNSI45020T1G. Constant Current Regulator & LED Driver. 45 V, 20 ma 15%
NSI45T1G Constant Current Regulator & Driver 45 V, ma 15% The solid state series of linear constant current regulators (CCRs) are Simple, Economical and Robust (SER) devices designed to provide a cost
More informationTMC3503 Triple Video D/A Converter 8 bit, 80 Msps, 5V
Triple Video D/A Converter 8 bit, 80 Msps, 5V Features 8-bit resolution 80, 50, and 30 megapixels per second ±0.5 LSB linearity error Sync, blank, and white controls Independent sync current output 1.0V
More informationFEATURES APPLICATIONS BLOCK DIAGRAM. PT6311 VFD Driver/Controller IC
VFD Driver/Controller IC DESCRIPTION PT6311 is a Vacuum Fluorescent Display (VFD) Controller driven on a 1/8 to 1/16 duty factor housed in 52-pin plastic QFP Package. Twelve segment output lines, 8 grid
More informationCH7021A SDTV / HDTV Encoder
Chrontel SDTV / HDTV Encoder Brief Datasheet Features VGA to SDTV/EDTV/HDTV conversion supporting graphics resolutions up to 1600x1200 HDTV support for 480p, 576p, 720p, 1080i and 1080p Support for NTSC,
More informationVideo Accessory IC Series Sync Separation ICs with Built-in AFC BA7046F, BA7071F Rev.A 1/9
Video Accessory IC Series Sync Separation ICs with Built-in AFC BA7046F, BA7071F No.10069EAT03 Description The BA7046F and BA7071F perform synchronization signal separation of a NTSC mode or PAL mode video
More informationTGA2807-SM TGA2807. CATV Ultra Linear Gain Amplifier. Applications. Ordering Information. CATV EDGE QAM Cards CMTS Equipment
Applications CATV EDGE QAM Cards CMTS Equipment 28-pin 5x5 mm QFN Package Product Features Functional Block Diagram 40-000 MHz Bandwidth DOCSIS 3.0 Compliant ACPR: -69 dbc at 6 dbmv Pout Pdiss:.9 W.5 db
More informationMaintenance/ Discontinued
CCD Delay Line Series MN390S NTSC-Compatible CCD H Video Signal Delay Element Overview The MN390S is a H image delay element of a f SC CMOS CCD and suitable for video signal processing applications. It
More informationComponent Analog TV Sync Separator
19-4103; Rev 1; 12/08 EVALUATION KIT AVAILABLE Component Analog TV Sync Separator General Description The video sync separator extracts sync timing information from standard-definition (SDTV), extendeddefinition
More informationMC54/74F568 MC54/74F569 4-BIT BIDIRECTIONAL COUNTERS (WITH 3-STATE OUTPUTS) 4-BIT BIDIRECTIONAL COUNTERS (WITH 3-STATE OUTPUTS)
4-BIT BIDIRECTIONAL COUNTERS (WITH 3-STATE OUTPUTS) The MC54/ 74F568 and MC54/74F569 are fully synchronous, reversible counters with 3-state outputs. The F568 is a BCD decade counter; the F569 is a binary
More informationDATASHEET EL1883. Features. Applications. Ordering Information. Demo Board. Pinout. Sync Separator with Horizontal Output. FN7010 Rev 2.
DATASHEET EL883 Sync Separator with Horizontal Output FN7 Rev 2. The EL883 video sync separator is manufactured using Elantec s high performance analog CMOS process. This device extracts sync timing information
More informationSLG7NT4445. Reset IC with Latch and MUX. GreenPAK 2 TM. Pin Configuration
GreenPAK 2 TM General Description Silego GreenPAK 2 SLG7NT4445 is a low power and small form device. The SoC is housed in a 2.5mm x 2.5mm TDFN package which is optimal for using with small devices. Features
More informationIs Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
More informationGHz High Dynamic Range Amplifier
Features.2 to 6. GHz Range +41 dbm Output IP3 1.7 db db +23 dbm P1dB LGA Package Single Power Supply Single Input Matching The is a high dynamic range amplifier designed for applications operating within
More informationMAX11503 BUFFER. Σ +6dB BUFFER GND *REMOVE AND SHORT FOR DC-COUPLED OPERATION
19-4031; Rev 0; 2/08 General Description The is a low-power video amplifier with a Y/C summer and chroma mute. The device accepts an S-video or Y/C input and sums the luma (Y) and chroma (C) signals into
More information82C55A CHMOS PROGRAMMABLE PERIPHERAL INTERFACE
Y Y Y Y Y 82C55A CHMOS PROGRAMMABLE PERIPHERAL INTERFACE Compatible with all Intel and Most Other Microprocessors High Speed Zero Wait State Operation with 8 MHz 8086 88 and 80186 188 24 Programmable I
More informationSURFACE MOUNT LED LAMP FULL COLOR 1210
PACKAGE DIMENSIONS 2 1 Top View.6 (1.5) G B R.17 (2.7) 3 4.127 (3.2) COMMON ANODE Side View RESIN.198 (.5).43 (1.1) Bottom View PCB.473 (1.2) ANODE SIDE.276 (.7) Pin 4 Die 1 Pin 1 (Red) Die 2 Pin 2 (Green)
More information