EN TECHNICAL MANUAL. Audio/video module for 2-wire system Art / 1621VC. Passion.Technology.Design.

Transcription

1 EN TEHNIA MANUA Audio/video module for 2wire system Art. / 1621 Passion.Technology.Design.

2 Table of contents Warning Description... 2 Art. ompatibility table...2 Art ompatibility table...2 ables for remote camera connection (Art only)...3 Technical specifications... 4 Art....4 Art External unit installation... 5 onnections... 7, 1621 connections...7, 1621 connections with separate power supply...7 Remote camera connection (Art only)...7 ariants...8 Module connection... 9 External unit module consumption table...9 Ikall / Ikall Metal modules...10 onnection of button modules 33433, 33434, 33436, 33433M, 33434M, 33436M...10 onnection of Art. 3348B, 3348BM...10 onnection of Art. 3360B, 3360BM...10 andalcom modules...11 onnection of Art. 3064S and Art onnection of Art. 3064S and Art. with additional power supply...11 onnection of Art. 3188A...12 onnection of Art. 3070S, 3072S...12 Modules for Singleplate external unit...13 onnection of Art. 3063D...13 onnection of Art. 3063D with additional power supply...13 Simplekey modules...14 onnection with Art. SK9015 for connection of readers Art. SK9000I and Art. SK9001I...14 Button programming Special programmes Installation information...18 System performance and layouts

3 Description Article is a colour audiovideo module which is compatible with omelit Building Kit video entry systems (exclusively 2wire), exclusively for use in conjunction with riser power supply unit Art It can be installed in Ikall, Ikall Metal, andalcom, Roma and N Series external units and can be finished with additional modules to meet all system requirements. Art. ompatibility table Ikall Ikall Metal andalcom M 3268S/0 Roma 32xx/RI A 33411M 3268S/ A 33412M 3268S/2 N Series 30xxN Item 1621 is an audio module allowing connection of a remote colour PA camera. It is compatible with omelit Building Kit video entry systems (2 pure wires), exclusively for use in conjunction with riser power supply unit Art It can be installed in Ikall, Ikall Metal, andalcom, Roma and N Series external units and can be finished with additional modules capable of fulfilling all system requirements. Art ompatibility table Ikall Ikall Metal andalcom M 3262S/0 Roma 30xx/RI A 33401M 3262S/ A 33402M 3262S/2 N Series 30xxNA To make use of the indicator EDs (busy, call sent, door opened, communication active) faceplates from kit 33400K are available to purchase separately for the IKA series. 3

4 N DIP PR 1 NF J9 N FF S1 DIP switches for function programming and setting the user code. 2. PR switch for input/output programming and J9 jumper for power supply management. Remove both in the case of a separate power supply. 4. NF switch for confirming special programmes. 5. The connector is reserved for module 1621, for the connection of the remote camera. 6. oudspeaker volume control. 7. Indicator ED: call sent. 8. Speaker. 9. Microphone. 10. Indicator ED: system busy. 11. Indicator ED: sound activated. 12. olour camera (with Art. only). 13. Indicator ED: lockrelease activated MAX 150 ma pole cable connector. 2. JP1 R network management for door lock filter on relay contacts (see ariant for using the external unit relay/ ariant for using a safety lock ). 3. Terminal block for connection: SE SE electric lock connection M common relay contact N normally closed relay contact N normally open relay contact GND input reference negative for DRTE D door opened signal input RTE local lockrelease input power supply negative power supply positive bus line connection ables for remote camera connection (Art only) Use cable A to power the camera from the external unit ( ma MAX). Use cable B if the camera is powered separately. 4

5 Technical specifications Art. MAIN SPEIFIATINS Simplebus Top system No ompatible with the Building Kit System Yes ip system No Audio system No Audio/video system Yes amera olors ideo encoding Mpeg Type of sensor 1/3'' D Horizontal resolution (T) 540T Minimum illumination 0,35lux ens size 3,6mm amera orientation Yes lamps RTE D GND SE SE M N N Microphone Yes Microphone volume control No oudspeaker Yes oudspeaker volume control Yes Relative humidity for operation 25 % 75 % Art MAIN SPEIFIATINS Simplebus Top system No ompatible with the Building Kit System Yes ip system No Audio system No Audio/video system Yes lamps RTE D GND SE SE M N N Microphone Yes Microphone volume control No oudspeaker Yes oudspeaker volume control Yes Relative humidity for operation 25 % 75 % 5

6 External unit installation 4045 cm cm 163 cm 163 cm 130 cm 1 2 The camera must not be installed opposite bright light sources, or in places where the filmed subject is against the light. In dim environments, we recommend additional lighting is provided. onnect the module support frame to earth. 3 4 Art. Art

7 ED FF S MT MPET WHITE FF BUE ED FF Nameplate ED lighting selection Alternative microphone position (excluding 4 module entrance panel) open close 7

8 N DIP N DIP onnections, 1621 connections 1210 SE SE N N M G N D D R T E 1621 ocal lockrelease button. Active input closed for DR PEN signal, 1621 connections with separate power supply SE SE M N N G D R N T D E 1621 J9 1 ocal lockrelease button. Active input closed for DR PEN signal Remote camera connection (Art only) PR 1 NF J9 N FF PR 1 NF J9 N FF S ~ MAX 150 ma 8

9 ariants ariant for using the external unit relay ariant for using a safety lock /24 AD 10A MAX SE SE M N N G D R N T D E 1621 SE SE M 12/24 A/D N N G D R N T D E.N.N relay activation on actuator command: 2 sec Set dip switches in permanent mode as shown in figure (Dip switch 8 N, Dip switches 1,2,3,4,5,6,7 FF) 1621 JP1 n. N contacts. n. N contacts. Excluded: voltagefree contact 9

10 Module connection n systems with Art. /1621 and power supply unit Art. 1210, the maximum current available for the external unit modules is 100 ma. alculate the total power consumption of the modules in your system configuration using the onsumption table. If the total power consumption exceeds 100 ma, connect a supplementary power supply unit (Art. 1595) to the and contacts of the external unit, as shown in the figure below (see, 1621 connections with separate power supply ). In any case, the total absorption must be lower than 500 ma. PR 1 NF J9 A power supply with Art B power supply with additional power supply Art External unit module consumption table ode onsumption Ikall and Ikall Metal modules / / M / 33434M / 33436M 20mA 3336 / 3336M 20mA 3339M 20mA 3348B 30mA 3348BM with 1 bistable relay active 60mA with 2 bistable relays active 80mA 3360B 3060BM 45mA 3332 / 3332M 20mA andalcom modules 3262S/1/2 / 3268S/1/2 (con Art. ) 8 ma 3064S (con Art. ) 16 ma 3070S only with S only with 1595 Modules for Singleplate external unit 3063D 8mA ED bulb 8mA Simplekey modules SK9000I 50mA SK9001I 50mA AM/R 60mA AM/ mA 10

11 Ikall / Ikall Metal modules onnection of button modules 33433, 33434, 33436, 33433M, 33434M, 33436M 1621 MAX 5 MAX 5 modules (MAX 17 modules with additional power supply) onnection of Art. 3348B, 3348BM 1210 SE SE M N N G D R N T D E N N N N ~ ~ A R D D K K B 3348BM MAX 2 MAX 2 modules (MAX 17 modules with additional power supply) onnection of Art. 3360B, 3360BM 1621 P G N D D S ac ac R G D 3360B 3360BM 11

12 andalcom modules onnection of Art. 3064S and Art G in out SE SE M N N G D R N T D E S S S N 1 N 2 N 6 MAX 6 with Art S S 3064S S 3064S 3064S black MAX 6 red Use the cable supplied with Art. 3262S, 3268S Insulate the cables after cutting them MAX 6 Art. 3064S plus up to 6 Art. Use bulb Art. for nameplate lighting. The bulb is polarised. onnection of Art. 3064S and Art. with additional power supply G in out SE SE M N N G D R N T D E S S S N 1 N 2 N 30 MAX 30 with Art S S 3064S S 3064S 3064S black J9 1 MAX 30 red Use the cable supplied with Art. 3262S, 3268S Insulate the cables after cutting them MAX 30 Art. 3064S plus up to 30 Art. Use bulb Art. for nameplate lighting. The bulb is polarised. 12

13 onnection of Art. 3188A SE SE G D R N N N T M D E S S N 1 N 2 N 15 S N2 2 N2 N1 1 N1 PGM RK 3188A ~ ~ K UT A A D D 3064S 3 MAX S S 3064S 3064S 3064S J9 1 MAX 15 Use the cable supplied with Art. 3262S, Art. 3268S ocal lockrelease button. MAX 15. onnection of Art. 3070S, 3072S SE SE M N N G D R N T D E J "" BUE "S" YEW "" BRWN 2E7T P T S Ḏ R R X X S D ~ ~ P ~ ~ D R D 3070S 3072S R X T X Use the cable 2E7T supplied with Art. 3070S and Art. 3072S ocal lockrelease button. 13

14 Modules for Singleplate external unit onnection of Art. 3063D G in out SE SE G D R N N N T M D E 1621 N 1 S P P 1 2 P P P P P P D N 1 with Art black red N 6 MAX 6 S P P 1 2 P P P P P P D N 6 MAX D 2 Use the cable included in Art. 1250I, Art. 1250IA Insulate the cables after cutting them MAX 6 Art. 3063D plus up to 6 Art. Use bulb Art. for nameplate lighting. The bulb is polarised onnection of Art. 3063D with additional power supply G in out SE SE G D R N N N T M D E 1621 N 1 S P P 1 2 P P P P P P D N 1 with Art black red J9 1 N 30 MAX 30 S P P 1 2 P P P P P P D N 30 MAX D 2 Use the cable included in Art. 1250I, Art. 1250IA Insulate the cables after cutting them MAX 30 Art. 3063D plus up to 30 Art.. Use bulb Art. for nameplate lighting. The bulb is polarised. 14

15 Simplekey modules onnection with Art. SK9015 for connection of readers Art. SK9000I and Art. SK9001I SK D Ḏ D Ḏ N N PB Ai Ao G RTE SE SE G D R N N N T M D E SK9000I SK9001I MAX 5 MAX 5 modules 15

16 Button programming Set the user code using the dip switches; see addressing table

17 Special programmes Set the dip switches for the function you wish to program, see the table

18 DE DIP SWITHES N FUNTINS Demisting heating element 213 1,3,5,7,8 FF (default) 212 3,5,7,8 N Audiovisual messages 195 1,2,7,8 Hebrew 196 3,7,8 Polish 197 1,3,7,8 atalan 198 2,3,7,8 Galician 199 1,2,3,7,8 Basque 206 2,3,4,7,8 Danish 207 1,2,3,4,7.8 Norwegian 211 1,2,5,7,8 Swedish 215 1,2,3,5,7.8 Italian 216 4,5,7,8 French 217 1,4,5,7,8 Spanish 218 2,4,5,7,8 Dutch 219 1,2,4,5,7.8 Greek 220 3,4,5,7,8 English 221 1,3,4,5,7.8 German 222 2,3,4,5,7.8 Portuguese 202 2,4,7,8 Enables voice message (door opened warning) when the RTE contact is closed 203 1,2,4,7,8 Disables voice message (door opened warning) when the RTE contact is closed (default setting) 208 5,7,8 Enables awaiting reset time" on lockrelease command 209 1,5,7,8 Disables awaiting reset time" on lockrelease command (awaiting response time or talk time will be activated) 210 2,5,7,8 isual messages only 214 2,3,5,7,8 FF (default) Actuator command management N.B. Art in generic actuator mode must not be present in the system ,2,6,7,8 Actuator function on S serial line = enabled 228 3,6,7,8 Actuator function on S serial line = disabled (default) 229 1,3,6,7,8.N.N relay activation on actuator command: 2 sec 230 2,3,6,7,8.N.N relay activation on actuator command: 4 sec 231 1,2,3,6,7.8.N.N relay activation on actuator command: 8 sec Door lock 245 1,3,5,6,7.8 Door lock time: 2 sec disabling tone (default) 246 2,3,5,6,7.8 Door lock time: 4 sec 247 1,2,3,5,6,7,8 Door lock time: 8 sec 248 4,5,6,7,8 Door lock confirmation tone: enabled 251 1,2,4,5,6,7,8 Relay.N.N in parallel to SE (default) 252 3,4,5,6,7.8 ockrelease always enabled (default) 253 1,3,4,5,6,7,8 ockrelease only enabled for user called System functions 232 4,6,7,8 Awaiting response time: 60 sec (default) 233 1,4,6,7,8 Awaiting response time: 120 sec 18

19 234 2,4,6,7,8 Awaiting response time: 30 sec 235 1,2,4,6,7.8 Talk time: 90 sec. (default) 236 3,4,6,7,8 Talk time: 180 sec 237 1,3,4,6,7.8 Selfignition: enabled (default) 238 2,3,4,6,7.8 Selfignition: disabled 239 1,2,3,4,6,7,8 onfirmation tone on user call = enabled (default) 240 5,6,7,8 onfirmation tone on user call = disabled 243 1,2,5,6,7.8 Awaiting reset time: 10 sec (default) 244 3,5,6,7,8 Awaiting reset time: 1 sec 208 5,7,8 Reset after lockrelease in audio: enabled (default) 209 1,5,7,8 Reset after lockrelease in audio: disabled 249 1,4,5,6,7.8 all transmission: single (default) 250 2,4,5,6,7.8 all transmission: triple System mode 0 Simplebus (default) 255 1,2,3,4,5,6,7.8 Simplebus Top (N Art. /4) 254 2,3,4,5,6,7,8 Restore default Installation information The module Art. / Art operates by default as a main external unit (timed busy signal). To set it as a secondary external unit (busy signal active for the whole time the riser is in use), set all the selector DIP switches to N. When a call is transmitted from the external unit, if a busy tone is heard instead of the ringtone, this means communication with another external unit is in progress. System performance and layouts For further information of system performance and to view installation layouts, click on the type of system that best meets your needs: Building Kit audio/video system for the creation of audiovideo systems for small apartment blocks 19

20 3 rd edition 07/2017 code 2G ERTIFIED MANAGEMENT SYSTEMS ia Don Arrigoni, Rovetta (BG) Italy