TeSys GV2 and GV3 Manual Starter and Protector

Transcription

1 GV2ME GV2P2 with GV2GH7 installed Starters TeSys GV2 and GV3 Manual Starter and Protetor Refer to 2520CT000 The GV family of produts are 3-pole, horsepower rated, UL 508 listed, manual starters. They inlude a manual disonnet, lass 0 ambient-ompensated thermal overload relay, and an instantaneous magneti trip mehanism in one ompat unit. Any GV manual starter an be used alone for loal manual ontrol of a motor with individual full-load urrents up to 220 amps. The GV family of produts may also be used in group motor installations in aordane with National Eletri Code artile Group motor installations give you greater panel density for smaller size and require fewer parts and less wiring neessary for installation when ompared to onventional panel designs. The GV2P and GV3P produts also have an additional UL 508 type E rating as a stand alone self-proteted manual ombination starter. The UL 508 type E rating requires the addition of line side insulating barrier GV2GH7 for the GV2P or part number GV3G66 for the GV3P. The GV2P and the GV3P self-proteted manual ombination starter may also be ombined with speifi size ontators from the LCD produt family for a UL 508 Type F ombination starter onstrution. These produts have UL-listed short iruit urrent rating from 0 00 KA depending on appliation size and voltage. See for more information. How to Order To order the basi motor starter, selet the model number (GV2ME, GV2P, or GV3P ) with the appropriate thermal setting from the table below. The thermal trip range and setting should be determined from the motor nameplate fullload urrent. Table 8.24: Thermal Setting (A) 5 V Maximum Horsepower Ratings Ø 3Ø 230 V 200 V 230 V 460 V 575 V Group Motor Appliations Max. Fuse or Ciruit Breaker GV2/3M push button GV2/3P rotary handle A GV2ME0a 59. GV2P A GV2ME02a 59. GV2P A GV2ME03a 59. GV2P A GV2ME04a 80. GV2P A GV2ME05a 80. GV2P A GV2ME06a 80. GV2P A GV2ME07a 80. GV2P / A GV2ME08a 80. GV2P / A GV2ME0a 80. GV2P A GV2ME4a 80. GV2P A GV2ME6a 224. GV2P A GV2ME20a 224. GV2P A GV2ME2a 224. GV2P A GV2ME22a 224. GV2P A GV2ME GV2P GV3P New! GV3P GV3P GV3P GV3P GV3P GV3P a For spring terminals add 3 to the atalog number, for example, GV2ME03. GV2ME32 is not available with spring terminals. 8 STARTERS GV3P GV7RE20 Table 8.25: Thermal Setting (A) 5 V Maximum Horsepower Ratings Ø 3Ø Toggle Operator 230 V 200 V 230 V 460 V 575 V Standard Interrupt High Interrupt Speifiations page 8-36 Aessories pages 8-34 to 8- Dimensions pages 8-52 to GV7RE GV7RS GV7RE GV7RS GV7RE GV7RS GV7RE GV7RS GV7RE GV7RS GV7RE00 6. GV7RS GV7RE GV7RS GV7RE GV7RS E64864 CCN NLRV LR8630 Class Shneider Eletri I Disount 8-33

2 8 STARTERS Starters Aessories GVAU6 GVAE GVAD00 Table 8.26: Voltage Trips a Voltage trips GV2 & GV3P TeSys GV2 and GV3 Manual Starters and Protetors Undervoltage or Shunt trip (external mount, blok right side only) Refer to 2502CT000 Only one trip or fault signaling ontat an be installed per GV2/GV3 devie. Desription Charateristis Voltage Frequeny a 24 V 50 Hz 60 Hz GVA 025 GVA V 50 Hz 60 Hz GVA 055 GVA V 50/60 Hz GVA V 50 Hz GVA 5 60 Hz GVA V 50 Hz GVA V 60 Hz GVA V 50 Hz GVA V 60 Hz GVA V 50 Hz 60 Hz GVA 225 GVA V 50 Hz GVA Hz GVA V 50 Hz GVA V 60 Hz GVA V 60 Hz GVA V 60 Hz GVA V 50 Hz 600 V 60 Hz GVA 505 To order an under voltage trip: replae the bullet ( ) with a U, example: GVAU025. To order a shunt trip: replae the bullet ( ) with an S, example: GVAS025. Table 8.27: Auxiliary Contat Bloks Desription Instantaneous auxiliary ontats GV2 + GV3P Fault signaling ontat + instantaneous auxiliary ontat GV2 + GV3P Mounting Loation Max. No. of Bloks Frontbg Left Hand Side 2 Left Hand Sided Contat Type Sold in lots of N.O. or N.C. GVAE 2.80 N.O. + N.C. 0 GVAEe.70 N.O. + N.O. GVAE20e.70 N.O. + N.C. GVANe.70 N.O. + N.O. GVAN20e.70 N.O. (fault) + N.O. GVAD00.00 N.O. (fault) + N.C. GVAD00.00 N.C. (fault) + N.O. GVAD00.00 N.C. (fault) + N.C. GVAD00.00 Short iruit signaling ontat GV2 + GV3P Left Hand Side SPDT GVAM.70 b Mounting of a GVAE ontat blok or a GV2AK00 visible isolation blok on GV2P. Choie of N.C. or N.O. ontat operation, depending on whih way the reversible blok is mounted. d The GVAD is always mounted next to the starter. e For spring terminals add 3 to the atalog number. Example: GVAE3 f One trip or one fault signaling an be fitted per GV3. g Cannot be used with GV2GH7 insulator. Table 8.28: Voltage Trips Tehnial Data (GV2AU, GV2AS) h Rated Voltage 660 Va Model Inrush Sealed Pik-Up Voltage Drop-Out Voltage Operating Timeh GVAU 2 VA / 8 W 3.5 VA /. W 0.8 to. 0. to to 5 ms GVAS 4 VA / 0.5 W 5 VA /.6 W 0.7 to. 0.2 to to 5 ms From the loss of voltage at the trip terminals to the opening of the starter ontats. Table 8.29: GV3P Aessories New! Desription For GV3P Set of 3-pole 5 A busbars (tap-offs: 2, pith: 64 mm) GV3P GV3G Set of 3-pole 5 A busbars (tap-offs: 3, pith: 64 mm) GV3P GV3G Cover Larger Spaing UL 508 type E (Only one over required on supply side) GV3P GV3G IP 20 over (Two overs required per starter) GV3P LAD Padloking devie For use with up to 4 padloks (not supplied) GV3P GV3P Ø 6 mm shank maximum GV2V GVAN Shneider Eletri CP0 I Disount

3 8 STARTERS Starters Aessories LSD30 TeSys Manual Starters and Protetors LS Fuseholders mm wide (same dimensions as GV2ME) Available with srew lamp and spring type terminals Mounts diretly to LCD09 D32 ontators (with use of GV2AF3 or GV2AF4) Meets appliation needs for fusible starter Uses GV2AE instantaneous ontat bloks to open ontrol iruits DIN rail mounted Refer to 2502CT000 Table 8.33: Dimensions Desription Fuse Type IN mm Use In Spring terminals, 3-pole CC, KTK-R 0.4 x x 38 US Markets LSD Srew lamp terminals, 3-pole CC, KTK-R 0.4 x x 38 US Markets LSD Spring terminals, 3-pole am, gg 0.39 x.5 0 x 38 European Markets LSD Srew lamp terminals, 3-pole am, gg 0.39 x.5 0 x 38 European Markets LSD Auxiliary main pole adder am, gg 0.39 x.5 0 x 38 European Markets LA8D324a 65. a Can be mounted on left-hand or right-hand side of the 3-pole LSD32 blok. Table 8.34: Speifiations Type LSD30, LSD303 LSD32, LSD323, LSDT32 Max. voltage 600 V 3 Phase Max. urrent 30 A Conforming to standards IEC , , , EN60204, BS484, UL 508, CSA No. 4, NFC , 63-20, 79-30, VDE 03, 0660 Produt approvals UL, CSA BV Protetive treatment TH TH Ambient air temperature operation -58 to 58 o F (-50 to +70 o C) Wiring of ondutors and ross setional area (.s.a.) Max. Min. Solid able 2 #8 AWG (2 6 mm 2 ) 2 #6 (2 mm 2 ) Flexible able without able end 2 #8 AWG (2 6 mm 2 ) 2 #4 (2 mm 2 ) Flexible able with able end 2 #0 AWG (2 4 mm 2 ) 2 #6 AWB (2 mm 2 ) Resistane to mehanial impat onforming to IEC J Tightening torque 5 in-lb (.7 N m) Sensitivity to phase failure No Table 8.: Speifiations Operating Positions: File E64864 CNN NLRV File LR8630 Class Rated voltage 600 V Rated thermal urrent 25 A (GV2), 63 A (GV3) Mehanial life: GV2: 00,000 operations Shok resistane 30 g (onforming to IEC ) Vibration resistane 5 g (5 to 50 Hz) (IEC ) Ambient temperature: -40 to 76 o F (-40 to +80 o C) for storage -4 to 40 o F (-20 to +60 o C) open operation -4 to 04 o F (-20 to +40 o C) enlosed operation Maximum operating life 25 operations per hour Operating urrent of magneti trip is approximately 3 times maximum thermal trip (non-adjustable setting) Shneider Eletri I Disount

4 GV2GH7 LAD3 LAD3 Starters Aessories Table 8.36: GV2 Mounting Aessories TeSys GV2 Manual Starters and Protetors Refer to 2502CT000 Desription Appliation Standard Pak b Eah Common mounting plate For GV2 plus any 3-pole LCD09 thru LCD25 ontator. (supplied with GVG02 onnetor) GK2AF Adapter plate For srew mounting of GV2M 0 GV2AF Interonnet for GV2 plus any 3-pole LCK or LPK ontator 0 GV2AF0 4.0 Combination blok Interonnet GV2 and LCD09 thru D32 0 GV2AF Interonnet GV2 and LCD09 thru D32 mounted on LAD3 0 GV2AF mm ompensation plate To allow mounting of GV2M and GV2P on a ommon bus bar 0 GVF Mounting plate For mounting GV2ME or GV2P and ontator LCD09 thru D32 0 LAD LAD Table 8.37: GV2 Cabling Aessories Bus Bars 3-Pole, 63 A Bus Bar Desription Appliation Pith Standard Pak b Eah For feeding 2 GV2 starters Table 8.38: GV2 Other Cabling Aessories 72 GV2G2 GV2G2 GV2G For feeding 3 GV2 starters GV2G3 GV2G For feeding 4 GV2 starters 72 GV2G4 GV2G4 GV2G For feeding 5 GV2 starters GV2G Desription Appliation Standard Pak b Eah Top feed for use with bus bars GVG Terminal bloks Bottom feed, to be used with bus bars; an be fitted with GVL3 urrent limiter GV2G Protetive end over To over unused bus bar outlets 5 GVG pole flexible onnetor For onneting a GV2 to an LCD09 thru D25 ontator 0 GVG Conduit adapter ( 2" NPT) GV2AK 6.20 Inoming line insulator For GV2P when used in UL 508 Type E appliationsa 0 GV2GH a Cannot be used with front-mounted auxiliary ontat blok. Table 8.39: GV2 Other Aessories Desription Appliation Standard Pak b Eah Visible isolation blok - GV2P Front mount, 3-pole visible isolation on inoming side of GV2P GV2AK Current limiter - GV2M Inreases interrupt apaity when attahed to GV2M GVL Through-Door operator - GV2P For operating GV2P through enlosure door (red handle, yellow legend plate) For NEMA use. IP GV2AP02.00 Table 8.40: GV2 Enlosures Desription Mounting Rating Eah Enlosures for GV2M Surfae mount NEMA, IP4 GV2MC0.00 IP55 GV2MC with or without aessories (maximum of aessory Flush mount NEMA, IP4 GV2MP0 3.0 on right and left) IP55 GV2MP02.00 Enlosures are not UL or CSA listed. Flush mount redued width NEMA, IP4 GV2MP (max. of aessory on right) IP55 GV2MP Table 8.4: GV2 Enlosures Aessories Desription Type Standard Pakb Eah Padloking devie for GV2M (when padloked, starter is automatially in Off position) GV2V Spring return GV2K0.90 Mushroom head stop push button Key release (Ronis key no. 5) GV2K (40 mm, red) Lathing Turn to Release GV2K Lathing / Padlokable Turn to Release GV2K Sealing kit For enlosures GV2MC0 and GV2MP0 0 GV2E V Green 0 GV2SN3 0 V Red 0 GV2SN4 0 V Orange 0 GV2SN5 0 V White 0 GV2SN7 220/240 V Green 0 GV2SN23 Pilot Light (neon) 220/240 V 220/240 V Red Orange 0 0 GV2SN24 GV2SN /240 V White 0 GV2SN27 380/440 V Green 0 GV2SN33 380/440 V Red 0 GV2SN34 380/440 V Orange 0 GV2SN 380/440 V White 0 GV2SN37 b Orders must speify multiples of quantities listed. Supplied with IP55 sealing kit. 8 STARTERS GV2AF3 / GV2AF Shneider Eletri I Disount 8-37

5 Dimensions TeSys Manual Starters and Protetors Refer to 2520CT000 GV2M GV2AD, AM, AN, AU, AS, AX GV2AE Mounting of GV2M Blok GV2AD, AM, AN Blok GV2AU, AS, AX On mm rail C 78.5 mm (3.09") on AMDP200 ( x 7.5 mm) C 86 mm (3.39") on AMDE200, ED200 ( x 5 mm) GV2P GV2AD, AM, AN, AU, AS, AX GV2AK00 Mounting of GV2P Blok GV2AD, AM, AN Blok GV2AU, AS, AX On mm rail C 98.5 mm (3.88") on AMDP200 ( x 7.5 mm) C 06 mm (4.7") on AMDE200, ED200 ( x 5 mm) 8 STARTERS GV2AF4 + LAD3 GV2P + GV2GH7 GV2P + GV2GH7 + TeSys D ontator Combination GV2ME + TeSys D range ontator Combination GV2P + TeSys D range ontator for UL 508 Type E appliation for UL 508 Type E appliation d d.77 b.77 b (9.4) 3.6 (9.4) 3.8 (96.52) 3.8 (96.52) GV2ME + LC2D09 to D8 LC2D25 and D32 GV2P + LC2D09 to D8 LC2D25 and D32 b 7.4 (88.6) 7.8 (99) b 6.6 (68.) 7.9 (99.5) 3.6 (92.7) 3.9 (99) 4.6 (6.8) 4.6 (6.8) 3.9 (98.2) 4. (04.5) 4.8 (22.3) 4.8 (22.3) d 3.9 (98.3) 3.9 (98.3) d 4. (03.8).4 (03.8) Surfae mounting enlosure GV2MC0 Flush mounting enlosure GV2MP0 (braket ut-out) a 2xØ5.3x b b a knok-outs for 6 mm plasti able glands or no. 6 onduit....6 / GV2 b b IN mm IN mm MP0, MP MP03, MP Shneider Eletri

6 Dimensions TeSys Manual Starters and Protetors Refer to 2520CT000 GV2M with GK2AF0 and LCK GV2M with GV2AF0 and LCK GV2M with GV2AF0 and LC2K Adapter plate GK2AF0 dimensions in mm Ø ±5 4.3 ± Mounting external operator GV2AP0 Door ut-out GV2M on panel with GV2AF02 adapter plate 7.5 mm height ompensation plate GVF / min.50 max Sets of bus bars, GV2G4, GV2G4, GV2G472 with terminal blok GV2G l p 4xØ Ø /60.97/2.36 Sets of bus bars with terminal blok GVG Sets of bus bars GV2G2, GV2G2, GV2G272 l 8 STARTERS I P GV2G4 0.6 x.8" (4 x mm) 7.0" (79 mm).8" ( mm) GV2G4 0.6 x 2." (4 x mm) 8." (206 mm) 2." ( mm) GV2G x.8" (4 x mm) 0.2" (260 mm) 2.8" (72 mm) Dimensions GV3 P I GV2G x.8" (2 x mm) 3.5" (89 mm) GV2G x 2." (2 x mm) 3.9" (98 mm) GV2G x 2.8"(2 x 72 mm) 4.6" (6 mm) GV2G3 0.2 x 2." (3 x mm) 6.0" (52 mm) Mounting on rail AM DE200 or AM ED20 36 X X () (2) X Eletrial learane (ISC max) 40 mm for Ue < 500 V, 50 mm for Ue < 690 V Mounting on panel, using M4 srews Bloks GV ANpp, GV ADpp, GV AM Blok GV3 AUpp and GV3 ASpp Mounting on pre-slotted mounting plate AM PA 83 AF EA4 6 3xØ4 37,5 37, ,5 36 8,7 8,7 Note: Leave a spae of 9 mm between 2 manual motor protetors: either an empty spae or side-mounting add-on ontat bloks. Horizontal mounting is possible: please onsult your regional sales offie Shneider Eletri 8-53