2018 BROCHURE.

Transcription

1 018 BROCHURE

2 FibreFlow from EMTELLE Table of contents FibreFlow from EMTELLE... 1 FibreFlow the optimal FttX solution Fibre-to-the-Cabinet (FttC) applications... Fibre-to-the-X (FttX)... 3 Multiple Dwelling Units (MDU)... 4 Aerial applications Applications Campus/Business Park applications Mobile 5G, Wifi Connections & Smart Cities Telemetry FttX Installation Techniques... 6 FibreFlow FttX Global Projects Fibre-in-Tube Solutions FibreFlow Fibre Products FibreFlow Microcable Fibre Unit (FU) QWKlink & QWKconnect FibreFlow Blown Fibre Micro and Mini Cable. 15 FibreFlow Tube Bundle Tube Bundle Microduct / Primary tube FibreFlow Tube Bundles Direct Bury metal free (DBmf) - Traditional... 1 Direct Bury metal free (DBmf) - Thickwall... Flexform... 4 Direct Bury (DB) - with foil Direct Install (DI) - with Foil Aerial Tube Bundle... 7 Low Fire Hazard (LFH) FibreFlow Tube Bundle - Tight Protected Microduct Special Products... 3 Pre-cabled ducts and microducts RTRYVA - Retractable Fibre System RTRYVA EMU Box Multifu Loose Protected Microduct... 4 Storage and Handling Connectors Connectors John Guest Microduct Connectors Connectors This document is protected by copyright Emtelle UK Limited [018]. The products depicted are protected by intellectual property rights. Any unauthorized copying of this document or of our products is prohibited and Emtelle UK Limited will take action to prevent any infringement of its rights and to claim damages for the loss that it suffers. At Emtelle we strive to improve our products every day and therefore strongly suggest that all new orders and specifications be confirmed by your Emtelle representative. The current specifications may be different from those listed in our latest catalogues, which are limited by publication date. For the latest specifications please visit our website at or contact your Emtelle representative.

3 FROM EMTELLE FibreFlow from EMTELLE FibreFlow the optimal FttX solution Easier, quicker, more efficient and extremely flexible Air blown fibre (as used by Emtelle s FibreFlow technology) is an integral part of FttX solutions. The FibreFlow strain-free method of installing fibre optic cables and fibre units in microducts rely on the flow of compressed air passing over the entire length of the cable to create a fluid drag, which gently carries the cable down the microduct. In addition, a set of rollers or a caterpillar drive typically pushes the fibre optic product into the microduct. Suitable for numerous applications and customers, air blown fibre has become the preferred installation method for those who value reliability, cost-effectiveness and flexibility. The development of air blown fibre has revolutionised the design of fibre optic products, resulting in a new generation of minicables that take up less room and need no heavy reinforcement. In addition, these developments have reduced the costs of the fibre products and the microducts into which they are installed. Emtelle s FibreFlow air blown fibre system is suitable for a wide range of applications, including: Fibre-to-the-Home Multiple Dwelling Units (MDU) In-Building Fibre to the cabinet Campus/Business Park Mobile Telephone Mast Connections City/Metropolitan Long-Distance Telemetry and Intelligent Transport systems Rail Motorway 5G & Wifi antennas Wind farms Overhead Cable TV Security 1

4 0 0 FibreFlow from EMTELLE FibreFlow the optimal FttX solution Indoor Tight Protected Microduct MDU/CAMPUS 1:3 Splitter Dome Customer Connection Point -Fixed Fibre Drop Customer Connection Point Tube Distribution Closure Customer Point -Upgradeable Fibre Drop (pre-installed) Internal Y Branch Customer Lead-in Point Drop Tube FTTH PoP Fibre Products Tight Protected Microduct Pre-Connect Fibre MDU Cabinet Railway Station Tight Protected Microduct Duct PoP Access Chamber A I90 c PoP H-Branch 3/6 HDPE Drop Duct H branch closure Tight Protected Microduct Access Chamber 0, IL: SC 0,10dB LC 0,1 166 IL: SC 0,10dB LC Batch Number (I.D) 1310 IL: SC 0,10dB LC 0,1 FTTC Accident I90 closed at J3 DBmf Heavy-Wall Bundles QWKconnect Pre-connectorised fibre unit pre-installed in subduct QWKlink Pre-connectorised fibre unit PoP Loose Protected Microduct PoP Fibre Unit Protected Connector Installation Equipment Minicable Rack Mount Splitter Street Cabinet Fibre-to-the-Cabinet (FttC) applications Emtelle leads the industry in the access part of fibre-based networks with small- and large-diameter FttC solutions that allow the installation of tube bundle networks from the Point of Presence to individual homes, businesses, street cabinets, etc. Emtelle not only lead the industry in providing access network solutions, they are leaders in the delivery of high fibre count mini cables in the feeder section of the network. Our standard offering is pre-installed loose and tight protected microduct which can be supplied in various duct sizes and microduct configurations. For customers with special requirements i.e. thermal stability or full water blocking capabilities, special fixed protected microduct products can be provided. Greater flexibility means that new customers can be connected quickly, for immediate revenue generation. Tools Fibre Products Street Cabinet Loose/tight Protected Microduct Point of Presence Lock & Block Kit Installation Equipment Micro Cable FU Tube Distribution Closure Direct Buried Connector Direct Buried Connector Access Chamber

5 FROM EMTELLE FibreFlow from EMTELLE Fibre-to-the-X (FttX) ccident losed at J3 Accident I90 closed at J3 Customer Connection Point Splicing Unit Internal Y Branch MOTORWAY Traffic Control Center PoP TELEMETRY Windfarm WINDFARM Tight Protected Microduct Loose Protected Microduct 3-6 mm Cable in Duct Loose Protected Microduct Key benefits of Emtelle s FibreFlow FttX solution Enhanced design flexibility Improved network scalability and reliability Reduced CapEx and OpEx for investor/ operator More lucrative return-on-investment potential Range of innovative pre-installed and pre-fitted components Quicker and less intrusive network modification/maintenance Refinery Refinery Splice Dome To Gantry / Station Tube Distribution Closure DBmf Drop Tube 1DB,5/3.5mm 3/6 HDPE Drop Duct Fibre-to-the-Home (FttH) applications Even a modest mix of popular broadband services can involve transfer speeds beyond traditional infrastructures. Optical fibre, however, is up to the task, and when deployed with FibreFlow can be installed easily and cost-effectively. Tubes can be laid fibre-ready along with other utility lines. This reduces build costs and the cost of redundant fibre provision. Fibre bundles can Consumer Lead-in Point simply be blown in to supply service when it is required. Duct Cabinet PoP 1:3 Splitter Dome Tube Distribution Closure Blowing Blowing equipment equipment Fibre Fibre Products products Tight Tube Protected Bundle Microduct Pre-Installed Microcable FU 3

6 FibreFlow from EMTELLE Fibre-to-the-X (FttX) Multiple Dwelling Units (MDU) To provide for a variety of MDU scenarios, Emtelle offers three solutions: Shared Microduct Routing, Direct Microduct Routing and Rapid Fit Installation. The first two solutions are ideal for use in modern high-rise applications. With Shared Routing, fibre is led up to each level, and then split to each customer connection point via a splicing unit. With Direct Routing, fibre is routed straight to each customer connection point. With this combination of solutions available, investors in the network can be sure that precisely the right technology is being deployed for their particular building. Rapid Fit Installation is ideally suited for smaller, typically less modern, MDUs. Here, a Fixed Fibre Drop or an Upgradeable Fibre Drop is plugged onto the customer s existing equipment. This procedure can be finished very quickly and with minimum disruption to the customer premises, ensuring that high-speed access can be made available literally at a snap. LFH Microduct to enable blowing of fibre bundle directly to apartments from outside (or from the basement) Low Rise / Garden Style MDU (Rapid Fit Installation) Customer Connection Point Internal Y Branch Indoor Tight Protected Microduct Medium Rise MDU (Direct Microduct Routing) RTRYVA Vertical fibre Pull back solution & EMU Box High Rise MDU (Blown & RTRYVA Solution) Customer Connection Point Splicing Unit PoP Internal Y Branch Customer Connection Point - Fixed Fibre Drop MDU Cabinet Tight Protected Microduct Installation Equipment Customer Connection Point - Upgradeable Fibre Drop (pre-installed) Pre-Connect QWKlink pre-connected Fibre fibre Pre-connectorised Fibre Node Dome Closure Universal drop tube- to feed fibre to apartments from the outside of the building 16mm mini trunking solution to feed fibre horizontally to apartments (from splicing unit) or 1 LFH drop duct if there is access to existing ducts or roof space 4 Tube Distribution Closure Aerial applications Emtelle s Aerial blown fibre solution is based on its renowned FibreFlow technology and products. Modern advances in fibre product design and installation OUTDOOR PE MICRODUCT practices have 1 FIBRE BASE UNIT revolutionized STEEL STRENGTH MEMBERS blown fibre aerial installation, producing impressive practical, technical and economic benefits without the need for digging. As a result, aerial installation is becoming recognized as a quick and cost-effective alternative, especially in cases where an existing aerial infrastructure (for example, phone lines or electrical cables) is already in place. Emtelle s Aerial blown fibre solution is ideal for a wide range of customers, including municipalities, housing developers, utility companies, network operators, cable TV operators, universities, hospitals. Cable Clamp AC68L 60 for GRP only Fibre Products Drop tube Figure-8 Tube Bundle PoP Bolt Suspension Clamp Customer Lead-In Point J-Hook bolt-through Bracket Branch Closure Cable Clamp Dome Closure Mid-Blow AC68L 500 for GRP only AC10 30 for Steel only

7 Accident I90 closed at J3 Accident I90 closed at J3 Accident I90 closed at J3 FROM EMTELLE FibreFlow from EMTELLE Applications Campus/Business Park applications The university, the business park, the hospital, the military base wherever people work together, they need to communicate. To maximise the potential of ever more sophisticated digital technology, high-bandwidth is essential. This requires an adaptable, robust infrastructure the kind you can easily achieve with FibreFlow. Mobile 5G, Wifi Connections & Smart Cities Emtelle FibreFlow solutions can also cater for Fibre to the Mast for localised Wifi and 5G/LTE for mobile signals. Emtelle can even incorporate power and fibre in a single cable, which allows Emtelle s range of products to cater for smart city applications. Railway Station PoP PoP PoP Splice Dome To Railway Station PoP PoP H Branch Closure Windfarm 3-6 mm Cable in Duct Optical Fibre Mini Cable or Fibre unit DBmf Drop Tubes Microduct Tube Assembly Duct Plug Traffic Control Center City POP 1 Way DB 5/3.5mm Dome Splice Enclosure Refinery Opticom Invictus Loose Protected Microduct Telemetry Emtelle s FibreFlow solution, can be used in a number of telemetry applications such as: wind farms oil/gas pipelines utilities intelligent transport systems housing projects 4 way 18/14 or similar with 88f cable. 1 Drop Tube Microcable Fibre Unit Closure 4A 5

8 FibreFlow from EMTELLE FttX Installation Techniques A Choice of Installation Techniques The popularity of FttX means that fibre is being installed in an increasingly wider range of applications. Different scenarios require different approaches, so Emtelle offers a variety of installation techniques. We have considerable experience in all these techniques, and can work with customers both to determine the most appropriate option and to implement it successfully. Direct Burial Utilisation of Existing Ducts Inside Sewer Mole Ploughing Aerial Narrow Trenching Semi Aerial/Façade Slot Cutting / Microtrenching 6

9 FROM EMTELLE FibreFlow from EMTELLE FibreFlow FttX Global Projects Emtelle has successfully met the challenges of a wide range of FttX projects. For further information on FibreFlow FttX Global Projects, please refer to In Building 000 Commercial Buildings in Singapore AMP Buildings throughout Australia Canary Wharf, London ABSA Bank, Pretoria, South Africa International Finance Centre, Dubai, UAE Auckland Sky Tower, New Zealand Commercial Buildings, Taiwan Australian Federal Police Fiona Stanley Hospital, Perth High Rise, Doha, Qatar High Rise Commercial and residential Bangkok, Thailand International Finance Centre, Dubai Campus/Business Park Changi Airport(T3 & T1 upgrade), Singapore Dublin Airport, Ireland Johannesburg International Airport, South Africa Manchester University, UK Balsburg Building Zurich Airport, Switzerland Kuala Lumpur International Airport, Malaysia Medunsa University, South Africa San Antonia, Texas, USA Dunedin University, New Zealand Perwaja Steel Industrial Complex, Malaysia Birmingham University, UK Manchester Airport, UK Curtin University, Australia University of Western Australia Melbourne Airport, Australia Brisbane Airport, Australia Royal Children s Hospital, Melbourne, Australia Royal Bolton Hospital Trust, UK Exxon Refinery, Fawley, UK York University, UK Galway Business Park, Ireland Shetland Council, UK Industrial Estate, Thailand Queens University, Belfast, UK North Staffordshire NHS, UK Salford Royal NHS, UK Leeds Metropolitan University, UK Lancashire Police HQ, UK VA Grand Junction Hospital, CO, USA VA Orange County Hospital, CA, USA Dallas Fort Worth Airport, TX, USA Kansas City Airport, KS, USA Ohio State Prison, OH Ankara, Turkey Eastern Goldfields Prison, Australia Midland Health Campus, WA Changi Airport, Singapore Fibre-to-the-Home / MDU Nuenen, Netherlands Binningup, Australia Säffle, Sweden Hillsboro, Oregon, USA Syd Energi, Denmark Tre-for Bredbaand, Denmark Energi Midt, Denmark Gothenburg, Sweden Kalgoorlie, Australia Södertälje, Sweden Eindhoven, Netherlands Örnsköldsvik, Sweden Monterrey, Mexico Enschede, Netherlands Delft, Netherlands Squire Creek, USA Leonie Hill, Singapore El Rio, Arizona, USA Lulea, Sweden Chunghwa Telecom, Taiwan Hau Hin, Thailand Maldives High Rise Apartments, Taiwan West Whitlawburn, UK Hilversum, Netherlands Amersfoort, Netherlands Dordrecht, Netherlands Soest, Netherlands Alpen aan de Rijn, Netherlands Skövde, Sweden Ystad, Sweden Rutland, UK Alston Community Broadband, UK Beaverton, OR, USA Homestead, VA, USA Skopje, Macedonia Lodz, Poland Neumünster, Germany Hamburg Eimsbüttel, Germany Cologne, Germany Sasbachwalden, Germany Gemeinde Heinzberg, Germany Montego Bay, Jamaica B4RN, Lancashire, UK Toronto, Canada Oldenzaal, Netherlands Almelo, Netherlands Netherlands Leonie Hill, Singapore Ports Long Beach, CA, USA San Diego, CA, USA Port Hueneme, CA, USA Oakland, CA, USA Port Rupert, Canada Fibre-to-the-Curb/(City) Olympic Games, Athens Lenowisco, USA Christchurch City Council, New Zealand Electricity Ashburton, New Zealand North Power Whangarei, New Zealand Grand Junction, CO, USA Long Distance Military Janaf, Croatia Type 45 Destroyer, Royal Navy Mandurah Rail, Australia Army and Air Force Bases, Gateway Upgrade Project, Australia Brisbane, Australia ADF, Enoggera, Australia Perth - Bunbury Highway, Australia RAAF Edinburgh, South Australia Reid Highway, Perth, Australia RAN Frigates, Australia Southampton City Council, UK RAAF Amberly, Australia Makati to Nasugbu Backbone Dover Air Force Base, USA Link, Philippines Sea cable landing sites, Cyprus Tenerife Don Muang Toll Way, Bangkok, Thailand SA Power Communications, Australia Tollway Projects, Philippines Starrett City, NY, USA Sunset Communications, VA, USA Marshall City, LA, USA Pax River, VA, USA City of Weston, FL, USA Yangon City Network, Myanmar Micro-trenching Fibre to Mast and building, Kuala Lumpur, Malaysia Miscellaneous Aerial Projects, Sweden Skellefteå Windfarm, Sweden London 01 Olympics, UK Manchester Metro, UK Trump International Golf Club, Aberdeenshire, UK Volvo Ocean Race, Galway, Ireland Electranet, Adelaide, Australia Energy Australia, NSW Gotthard Railway Tunnel, Switzerland Fibre backbone, Guam 4.5km bridge, New York State, USA BTS MRT Bangkok, Thailand Janaf, Croatia Type 45 Destroyer, Royal Navy 7

10 FibreFlow from EMTELLE Fibre-in-Tube Solutions Emtelle can manufacture a variety of pre-installed fibre in tube solutions to ensure the installation process is simple, quick and cost effective. QWKconnect MULTIFU Pre-connectorised Fibre Microduct System See page 13 Retractable Fibre Tube Bundle See page 41 PIFU Pre-installed Fibre Unit See page 38 Retractable Fibre System See page 39 Cable in Duct 8 Pre-installed cable in ducts & microducts See page 37

11 FROM EMTELLE FibreFlow from Fibre EMTELLE Products FibreFlow Fibre Products 9

12 FibreFlow from Fibre EMTELLE Products FibreFlow Microcable Fibre Unit (FU) If asked to list the most important issues to be considered when choosing a high performance fibre unit, most people would include: performance, ease-ofhandling and durability. In all these criteria, Emtelle s microcable FU has been shown to exceed other currently available fibre units. In contrast with previous generation fibre units (typically known as EPFU ), Emtelle s fibre unit contains a stateof the-art, specifically designed polymeric sheath that is optimised for blowing: tests (500 metres at 50 metres per minute) have shown that this sheath, in combination with the fibre unit s single layer resin, improves blowing performance up to 50%. The fibre unit, which is compatible with industrystandard blowing equipment, is also extremely easy to use and handle. For example, compared to other methods, stripping the fibre can be done simply, quickly and with greater reliability. This ensures considerable savings on the costs associated with manpower. In terms of durability, the fibre unit again outperforms legacy designs. Ease of handling and durability Compatible with industry-standard blowing equipment Optimised for blowing Proven in many worldwide projects Standard sheath colour is yellow. Other colours are available on request. Fibre 4 Fibre 6 Fibre 8 Fibre 1 Fibre Diameter 1.1 mm 1.1 mm 1.3 mm 1.5 mm 1.6mm Weight (mass) 1.0 g/m 1.0 g/m 1.6 g/m 1.8 g/m. g/m Breakout typically mins for 3m Blowing distance up to 000m Minimum Bore size.1mm.1mm.5mm 3.5mm 3.5mm No Colour Blue Orange Green Red Grey Yellow Brown Violet Black Aqua Pink White Packaging Fibre types fibre rosette into pan single mode ITU-T G.65d single mode ITU-T G.657A1 G.657A single mode ITU-T G.655 multi mode 6.5/15 OM1 multi mode 50/15 OM, OM3, OM4 Refer to page 10 for product codes. Microduct size mm Microcable FU fibre count / / / Combo fibre unit (MHT104) Combinations of multi mode fibres, optionally together with single mode fibre types or filling elements specific to customer requirements. Contact your local Emtelle representative for further details. 10

13 FROM EMTELLE FibreFlow from Fibre EMTELLE Products FibreFlow Microcable Fibre Unit (FU) FibreFlow Microcable FU product codes Fibre Count single mode ITU-T G.65d G.657A1 G.657A G /15 OM1 50/15 OM multi mode 50/15 OM3 50/15 OM Generic Specification MHT101 MHT185 MHT185 MHT10 MHT103 Technical Specification MHT1401 MHT050 MHT050 Order Example fibre G65d = Product Code 903 and specify standard length required XC Fibre Bundle Fibre Unit (FU) with up to twelve fibres set in a layer providing excellent dimensional and thermal stability. An outer thermoplastic layer provides a high level of protection and excellent installation properties. The microcable is designed for blowing and pushing long distances into microducts and tube bundles. The fibres are dry, not coated with gel, thus permitting fast and contamination free connections. Fibre Count Fibre Type Generic Spec G657A MHT649 4 G657A MHT649 1 G657A MHT649 Pan Weights and Dimensions (ext. height x diameter) Standard Length 1,000m 6,000m 4,000m,000m fibre 4 fibre 6 fibre 8 fibre 1 fibre 16.5 kg Large 10 kg Medium 6.5 kg Small 4.5 kg Small 14.0 kg Large 10. kg Medium 5.7 kg Small 15.0 kg Large 11.0 kg Medium 6.0 kg Small NordicLite Nanocable 18 kg Large 13.0 kg Medium 7.0 kg Small Emtelle can also offer non-standard lengths. These may be subject to longer lead-times than our standard product range. Please call your local Emtelle representative to check for availability. Small: diameter 540mm, height 00mm, Medium: diameter 540mm, height 300mm, Large: diameter 540mm. height 400mm f 4f 6f 8f 1f Optical fibre microcable with up to twelve fibres set in an encapsulating layer providing excellent dimensional and thermal stability. An outer thermoplastic layer provides a high level of protection and excellent installation properties. The microcable is designed for blowing and pushing long distances into microducts and tube bundles. The strong outer sheath means that additional protection is not required in protected closures or cabinets. The fibres are dry, not coated with gel, thus permitting fast and contamination free connections. Scan the QR-code with your smartphone and watch the NordicLite video. Fibre count Nordic Lite Product code Key Features: Designed to be installed by blowing, pulling or pushing Low weight Small diameter All dielectric design Ultra low friction sheath Low coil set 11

14 166 IL: SC 0,10dB LC 0,10 0,1 LC 0,10dB SC IL: IL: SC 0,10dB LC 0,1 (I.D) Number Batch 0 0 FibreFlow from Fibre EMTELLE Products QWKlink Pre-connectorised fibre unit Emtelle s pre-connected fibre bundle allows for fibre connectors on both ends, eliminating the need to splice fibres for FTTx drop applications. The Emtelle QWKlink range of fibre is supplied with an LC Ferrule which can be blown into microducts with a minimum inner diameter of 3.5mm.The LC/APC connector can be field assembled after installation. The opposite end (house connection) is terminated with an SC-APC connector. The pre-ferruled fibre can be blown into microducts that have been directly buried, installed into ducts, installed along walls or into overhead Blown Fibre networks. (Please see Emtelle s QWKDrop range of products). These pre-connected fibre bundles can be blown from 5 metres upto over 1000 metres in new and existing Blown Fibre routes. Why use QWKlink Can be connectorised at one end or both ends SC and LC APC connector options available No fibre splicing required for the customer drop Extremely small storage area for excess fibre Reduced skill set & training required for the install Massively reduced capex for installation equipment Cost (and space) effective compared to similar products in the market 1

15 FROM EMTELLE FibreFlow from Fibre EMTELLE Products QWKconnect Pre-connectorised fibre unit in microduct QWKconnect, is effectively the QWKlink product pre-installed into a Fibreflow microduct during the manufacturing process. This means that microducts from 5mm OD can be installed between the cabinet / POP / Splice enclosure and the customer premises with the QWKlink fibre already installed, eliminating blowing costs and splicing costs for the operator. Our QWKconnect MDU for internal use is manufactured out of LFH material giving excellent performance in a fire scenario. External Why use QWKconnect Various options which can be installed underground (direct buried and ducted), along walls, overhead, including wifi antennas, or indoors for MDUs Fibre pre-installed can be connectorised at one end or both ends SC and LC APC connector options available No blowing or fibre splicing required for the customer drop Extremely small storage area for excess fibre Reduced skill set & training required for the install Massively reduced capex for installation equipment Cost (and space) effective compared to similar products in the market Scan the QR-code with your smartphone and watch the QWKconnect video. Internal How to order QWKlink & QWKconnect Use the part code guide below to select the unique QWKlink or QWKconnect configuration that you would like to order. Options available are shown in boxes below the example part code representation of QLSM03A. Lengths from 5m to 500m are available in either G657A1 or G657A fibre Both ends of QWKlink come pre-connected at each end with a fixed SC/APC or LC/APC connector or with a blowable ferrule (SCv/APC or LCv/APC). After blowing is complete, the ferrule is easily converted into a connector using the connector component kit supplied. Select the appropriate connector types below. QWKconnect features QWKlink pre-installed into a choice of drop tubes and is selected by adding a single suffix letter code to the 8 character QWKlink code. The QLSM03 example shown below would be a 75 metre long QWKlink made of G657A fibre with a fixed SC/ APC connector at one end and a blowable LCv/APC ferrule at the other end. If QWKlink is required rather than QWKconnect, the last character of the part code is ignored. Q L S M 0 3 A QWKtype L = QWKlink C = QWKconnect End 1 S = SC/APC T = SCv/APC L = LC/APC M = LCv/APC End S = SC/APC T = SCv/APC L = LC/APC M = LCv/APC Length 01 = 5m 0 = 50m 03 = 75m 04 = 100m 05 = 15m 06 = 150m 07 = 175m 08 = 00m 10 = 50m 1 = 300m 14 = 350m 16 = 400m 18 = 450m 0 = 500m Fibre type 1 = G657A1 = G657A QWKconnect only A = 8/5 tube B = 8/4 C = 7/3.7 D = 7/4 E = 7/3.5 F = 8/5 LFH G = 8/4 LFH H = 7/4 LFH J = 7/3.5 LFH K = 5/3.5 LFH 13

16 FibreFlow from Fibre EMTELLE Products FDN Connectorised Closure Product Code 7355 The connectorised FDN closure from HellermannTyton has been designed to offer engineers in access networks the benefit of speed and ease when connecting customers to their fibre optic network. Features: Quick and simple customer connection or disconnection Pre-fitted splitter cassette options Uses HellermannTyton s Cablelok - 100% Mechanical seal Ruggedised closure tested to 6m head of water Maximum 180 fibre splice capacity 58 round ports and 1 oval port Fibre storage basket for loop through applications Hellipse NZDF SE-A trays Suitable for LC Duplex or SC Simplex adaptors Maximum 1 splices per tray without double stacking Splitter accommodation Cablelok compatible for all port sizes Quick release cover Optional flash test valve and/or grounding feed-through Accessories Splice Trays Description Product Code 1 x Heatshrink x ANT Accessories Adapters Description Product Code LC/APC Duplex SC/APC Simplex FST Connectorised Closure Scan the QR-code with your smartphone and watch the FDN connectorised closure video. Product Code The connectorised FST closure from HellermannTyton has been designed to offer engineers in access networks the benefit of speed and ease when connecting customers to their fibre optic network. The FST is fitted with a front mounted adaptor plate suitable for 8 x SC simplex or 8 x LC duplex adaptors. The closures single splice tray can accommodate up to 1 splices with the rear of the tray providing suitable storage area for loop through applications. The 13-port base enables feeder cables to be installed as cable end or mid span and has separate R ports for drop cables. Accessories Adapters Features: Quick and simple customer connection or disconnection Uses HellermannTyton s Cablelok - 100% Mechanical seal Maximum 1 fibre splice capacity Description Product Code LC Duplex SC - Simplex 1 round ports and 1 oval port Suitable for LC Duplex or SC Simplex adaptors Cablelok compatible for all port sizes Quick release cover Scan the QR-code with your smartphone and watch the FST connectorised closure video. Façade Closure Fibre Storage 14 Product Code The Fibre Facade Enclosure provides a cost effective secure solution for installing pre-terminated drop cables in Fibre to the Home (FTTH) applications. It can be mounted aerially or at ground level to deliver stored fibre to the customer premises.

17 FROM EMTELLE FibreFlow from Fibre EMTELLE Products FibreFlow Blown Fibre Micro and Mini Cable Emtelle offers a range of micro and mini cable products. These products work in conjunction with Emtelle s lowfriction tube bundles for optimum blowing performance. For customer applications where a high fibre count is required, Emtelle offers a range of mini cable products that are fully water blocked and contain an FRP central strength member (1f to 16f). Emtelle also offers Microcables which are small fibre bundles (f to 4f) that are water blocked and often, but not always, contain an additional strength member. Contact your local Emtelle representative for more information. The figures in the table below are representative only. 1f 4f 36f 48f 7f 96f 144f Micro Cable Mini Cable Typical Diameter.0mm.0mm.3mm.8mm 5.8mm 6.4mm 8.5mm 10.5 Blowing Distance 100m typical 000m typical 1000m 1500m typical Available Fibre Types Minimum Order Quantity SM G.65d, G.657A1, G655, G656 (other types available on request) 4000m Microduct size mm Micro Cable Mini Cable / / / / / /14 3 Fibre And Tube Identification Colours to EIA 598 or customer requirement No Colour Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua Sheath Marking Marked every 1m with standard Emtelle printing or to customer requirement Emtelle FibreFlow - Year - Fibre Count, G65d - Product Code - Batch ID - Metre Mark 15

18 FibreFlow from Fibre EMTELLE Products FibreFlow Blown Fibre Micro and Mini Cable No. fibres - 1f 4f 48f 7f No. Tubes Fibre Type - G65D G657A1 G65D G657A1 G65D G657A1 G65D G657A1 Tube OD/ID Ø Mm 1.45/ / / /1.15 No. dummy tubes Central Strength Member Ø Mm Cable mass Kg/km Sheath Thickness Mm Sheath Material - HDPE HDPE HDPE HDPE Cable outer Ø Mm Bending radius (installation) Mm 0x Ø 0x Ø 0x Ø 0x Ø Bending radius (service) Mm 10x Ø 10x Ø 10x Ø 10x Ø Max load (fibre strain 0.3% Max) kn Data-Sheet - MHT441 MHT441 MHT441 MHT441 Supply Length Km 4,6,8 & 1 4,6,8 & 1 4,6,8 & 1 4,6,8 & 1 Product Code No. fibres - 96f 96f 144f 88f No. Tubes Fibre Type - G657A1 G65D / G65D G65D G657A1 G65D G657A1 G65D Tube OD/ID Ø Mm 1.45/ / / /1.15 No. dummy tubes Central Strength Member Ø Mm Cable mass Kg/km Sheath Thickness Mm Sheath Material - HDPE HDPE PA HDPE PA HDPE Cable outer Ø Mm Bending radius (installation) Mm 0x Ø 0x Ø 0x Ø 0x Ø Bending radius (service) Mm 10x Ø 10x Ø 10x Ø 1x Ø Max load (fibre strain 0.3% Max) kn Data-Sheet - MHT440 MHT43 MHT615 UK_DS_7919 UK_DS_7300 Supply Length Km 4,6,8 & 1 4,6,8 & 1 4,6,8 & 1 4, 6 & 8 Product Code (eia-598) For other cables see Fibre Optic Cable catalogue 16

19 FibreFlow FROM EMTELLE Tube bundle - tight FibreFlow protected from microduct EMTELLE FibreFlow Tube Bundle 17

20 FibreFlow from Tube EMTELLE bundle - tight protected microduct Tube Bundle Emtelle is experienced enough in air blown fibre installation to understand that no two projects are the same. Factors such as network size, customer requirements, geography, topography, application areas and usage projections (to name but a few) require special considerations in terms of the technology and products used. To ensure that it provides the right solution every time, Emtelle offers an extensive line of high-quality products that can cover the requirements of the vast majority of projects. For easy reference, the following pages provide details of our tube bundle products. The following pages detail Emtelle s FibreFlow microduct bundles. These products are supplied on non-returnable wooden drums or plywood reels. Each FibreFlow product listed in the product table on the following pages will refer to a drum type, which is the particular drum the product is supplied on. As there are different size drums, please refer back to the table underneath providing information on the drum dimensions and drum weight for an empty drum. Drum Type Product code Dimensions (OD x W )mm Weight kg coil 600 x ply x ply x ply x ply x ply x E x F x G x HH x MB5 100 x D x D x D x D x D x D x

21 FibreFlow FROM EMTELLE Tube bundle - tight FibreFlow protected from microduct EMTELLE Microduct / Primary tube Microduct Supply Length Minimum Order Quantity Product weight per metre gms Drum Type 3/.1mm PE 4000m 4000m 3.4 HH 4/.1mm PE 4000m 4000m 9 HH 5/.1mm PE 4000m 4000m 15 HH 5/3.5mm PE 5000m 5000m 9.4 HH 6/.7mm PE 4000m 4000m 0.9 HH 7/3.5mm PE 4000m 4000m 8 HH 7/4mm PE 4000m 4000m 5 HH 8/3.5mm PE 3000m 3000m 38 HH 8/5mm PE 3000m 3000m 9. HH 8/6mm PE 3000m 3000m 1 HH 10/6mm PE 000m 4000m 48 HH 10/8mm PE 000m 4000m 7 HH 1/8mm PE 000m 4000m 60 HH 1/10mm PE 000m 4000m 33 HH 14/10mm PE 1000m 4000m 7. HH 16/10mm PE 1000m 4000m HH 16/1mm PE 1000m 4000m 83.9 HH 5/3.5mm LFH 4000m 4000m 15.3 HH 5/3.5mm LFH 500m 4000m Ply 6/.7mm LFH 4000m 4000m 34.3 HH 7/4mm LFH 4000m 4000m 39.4 HH 1/8mm LFH 000m 4000m 96 HH 14/10mm LFH 1000m 4000m 115 HH Subducts 18/14 PE 000m 4000m 95.9 B 0/14 PE 000m 4000m D 0/16 PE 000m 4000m D Available in 1 colours: No Colour Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua For handling guidelines, please visit 19

22 FibreFlow from Tube EMTELLE bundle - tight protected microduct FibreFlow Tube Bundles Tight protected microducts: suitable for the installation of fibre units containing between 1 and 1 fibres as well as minicable (4-144 fibres). In 3mm, 5mm, 7mm and 8mm microduct diameters the bundles can contain up to 4 individual microducts. They are usually deployed in the access part of the network in FttH and Campus applications, for example. FibreFlow microducts with diameters ranging from 3 to 16mm are available and can be bundled in configurations of up to 4 tubes dependent on the individual microduct diameter. Bundles are available in several types for example, direct bury, direct install and low fire hazard making them ideal for diverse applications such as FttH, In-Building and Campus. They can also be customized to meet specific environmental challenges. Emtelle STANDARD Standard TUBE Microduct NUMBERING Numbering SYSTEM System Microduct Sequence (DI/DB) DB/EIA LFH DI/DB TUBE SEQUENCE (DI/DB) 1 -WAY red 1 green WAY red 1 green 1 3 natural 1 4 blue WAY natural 1 red 1 3 green 1 4 blue 1 5 blue 6 blue 3 7 blue WAY red 1 7 yellow green 1 8 yellow 3 3 natural 1 9 blue 1 4 red 10 blue 5 green 11 blue 3 6 yellow 1 1 blue WAY natural 1 10 yellow 1 red 1 11 yellow 3 green 1 1 yellow 3 4 natural 13 yellow 4 5 natural 3 14 yellow 5 6 natural 4 15 blue 1 7 natural 5 16 blue 8 red 17 blue 3 9 green 18 blue 4 19 blue 5 S S S S S S S 4-WAY The Central microduct can be used to blow mini cable. 1 red 1 1 yellow 1 green 1 13 yellow 3 natural 1 14 yellow 3 4 natural 15 yellow 4 5 natural 3 16 yellow 5 6 natural 4 17 yellow 6 7 natural 5 18 yellow 7 8 natural 6 19 blue 1 9 natural 7 0 blue 10 red 1 blue 3 11 green blue 4 3 blue 5 4 blue 6 S S S S S S S S S S S S 0

23 FibreFlow FROM EMTELLE Tube bundle - tight FibreFlow protected from microduct EMTELLE Direct Bury metal free (DBmf) - Traditional Assemblies of PE microducts, each with low friction performance. Each assembly (tube bundle) is surrounded by a water blocking tape that reacts to block water movement. Over the bundle is one sheath of flexible black PE, and one sheath of tough orange direct burial-grade PE. These strong products are designed for direct burial into suitably prepared ground. Product Code Description Supply length Drum Type Product weight per metre gms Bundle OD mm Generic Specification 5/.1mm 8351T 1DBmf (heavy-wall) 500m coil MHT181 5/3.5mm 833T 1DBmf 500m coil MHT T 1DBmf 500m 600ply MHT TS 1DBmf 000m F MHT T 1DBmf 4000m MB MHT T DBmf 000m G x 17.3 MHT TL DBmf 4000m 1.4D x 17.3 MHT T 4DBmf 4000m 1.7D MHT T 7DBmf 4000m.0D 6.3 MHT156 80T 1DBmf 4000m.35D MHT156 81T 19DBmf 3000m.35D MHT156 8T 4DBmf 000m.D MHT156 10/8mm 839 1DBmf 000m MB MHT DBmf 000m 1.4D x 7.3 MHT DBmf 000m.0D MHT DBmf 000m.D MHT DBmf 000m.D MHT1805 1/10mm 601 DBmf 000m 1.7D x 31.1 MHT DBmf 000m.D MHT DBmf 000m.35D MHT DBmf 1000m.0D MHT

24 FibreFlow from Tube EMTELLE bundle - tight protected microduct Direct Bury metal free (DBmf) - Thickwall DBmf Heavy-Wall Microduct Bundles All these bundles have simplicity and strength. They have exceptional toughness and crush resistance and can be directly buried without the need for additional protective closures at branch-off points, or inline connections. The individual microducts are so strong that the outer sheath does not need to be protective in design, but simply holds the bundle together. The individual tubes can be joined by Protected and Directly Buried rated connectors (page 66-68). This solution is easy to use, quick to install and will reduce the Total Cost of Ownership long term. The 1, and 3 way bundles are also suitable for slot cut installations. Product Code Description Supply Length Drum Type Product weight per metre gms Bundle OD mm Generic Specification 5/.1mm 8351T 1DBmf 500m coil MHT181 7/3.5mm DBmf 4000m HH MHT DBmf 4000m MB x 16.4 MHT DBmf 4000m 1.7D MHT DBmf 4000m.0D MHT DBmf 3000m.D MHT DBmf 000m.D MHT DBmf 1000m.D MHT309 7/4mm DBmf 4000m HH MHT DBmf 4000m MB x 16.4 MHT DBmf 4000m 1.7D MHT DBmf 4000m.0D MHT DBmf 3000m.D MHT DBmf 000m.D MHT DBmf 1000m.D MHT309 8/3.5mm DBmf 000m HH MHT DBmf 3000m G MHT059 10/6mm DBmf 000m HH MHT DBmf 000m MB x MHT DBmf 000m 1.4D 18 1 x 3 MHT DBmf 000m 1.4D MHT DBmf 000m D MHT DBmf 000m.0D MHT DBmf 1500m.35D CP99

25 FibreFlow FROM EMTELLE Tube bundle - tight FibreFlow protected from microduct EMTELLE Example configuration Product Code Description Supply Length Drum Type Product weight per metre gms Bundle OD mm Generic Specification 1/8mm DBmf 000m HH MHT DBmf 000m 1.4D x 6 MHT DBmf 000m 1.4D x 38 MHT DBmf 000m.0D MHT DBmf 000m.D MHT DBmf 000m.D MHT DBmf 000m.D MHT DBmf 1000m.D MHT /10mm DBmf 1400m HH MHT DBmf 1400m MB x 16mm MHT DBmf 1400m 1.4D x 16mm MHT DBmf 1400m.0D mm across corners MHT DBmf 1400m.0D mm across corners MHT DBmf 1400m.D mm across corners MHT DBmf 1400m.D mm across corners MHT308 16/1mm DBmf 1000m F MHT DBmf 1000m MB x 18 MHT DBmf 1000m 1.4D x 18 MHT DBmf 1000m.0D mm across corners MHT DBmf 1000m.0D mm across corners MHT DBmf 1000m.D 64 50mm across corners MHT DBmf 1000m.D mm across corners MHT43 3

26 FibreFlow from Tube EMTELLE bundle - tight protected microduct Flexform Direct Bury metal free These products have a thin flexible sheath allowing the bundle to take many shapes of form. All are designed to fit into a 30mm wide slot (except CP1594, 3mm wide slot). Colours and print can be Emtelle standard or customer specific. All designs can have an optional 0.63mm tracer wire included. Product Code Description Number of Microducts 1/8 14/10 16/1 18/14 Mass (g/m) MBR* (mm) Design way Flexform CP way Flexform CP way Flexform CP way Flexform CP way Flexform CP way Flexform CP way Flexform CP way Flexform CP way Flexform CP way Flexform CP way Flexform CP way Flexform CP1581 *Assumes product has flattened out to the narrowest possible 4

27 FibreFlow FROM EMTELLE Tube bundle - tight FibreFlow protected from microduct EMTELLE Direct Bury (DB) - with foil The assembly is surrounded with a 15μm aluminium layer, bonded inside a sheath of flexible black PE with a heavy duty orange coloured HDPE sheath making the product suitable for direct burial. Rip cords are pre-installed along the entire length, under the sheath, to rip through the aluminium and sheath using correct procedure. Product Code Description Microduct Size Supply Length Drum Type Product weight per metre gms Bundle OD mm Generic Specification 667 1DB 5/3.5mm 4000m MB MHT DB 5/3.5mm 4000m 1.4D x 17. MHT DB 5/3.5mm 4000m 1.7D MHT DB 5/3.5mm 4000m.0D 78. MHT DB 5/3.5mm 4000m.35D MHT DB 5/3.5mm 3000m.35D MHT DB 5/3.5mm 000m.D MHT DB 8/6mm 4000m 1.4D MHT DB 8/6mm 4000m 1.7D x 3. MHT DB 8/6mm 000m 1.7D MHT DB 8/6mm 000m.0D MHT DB 8/6mm 000m.35D MHT DB 8/6mm 1400m.35D MHT DB 10/8mm 000m MB MHT DB 10/8mm 000m 1.4D x 7. MHT DB 10/8mm (round) 000m.0D MHT DB 10/8mm 000m.D MHT DB 10/8mm 1000m.D MHT DB 1/10mm 000m MB MHT DB 1/10mm 000m 1.7D x 31.1 MHT DB 1/10mm (round) 000m.D MHT DB 1/10mm 1000m.0D MHT Direct Bury Termite Resistant (DBT) Microducts are oversheathed with a layer of nylon1, which gives mechanical and chemical protection against attack by termites and ants (and their formic acid). Product Code Description Microduct Size Supply Length Drum Type Product weight g/m Generic Specification 669 1DBT 5/3.5mm 4000m 1.4D 136 MHT DBT 5/3.5mm 4000m 1.4D 164 MHT DBT 5/3.5mm 4000m.0D 60 MHT DBT 5/3.5mm 4000m.0D 38 MHT DBT 5/3.5mm 3000m.D 475 MHT DBT 5/3.5mm 000m.D 599 MHT DBT 5/3.5mm 000m.D 730 MHT1774 5

28 FibreFlow from Tube EMTELLE bundle - tight protected microduct Direct Install (DI) - with Foil The assembly is surrounded with a 15µm aluminium layer, bonded inside a sheath of flexible black PE for direct-in-duct installation. A rip cord is pre-installed along the entire length, under the sheath, to rip through the aluminium and sheath using correct procedure. Also available in 8/6mm. Product Code Description Supply Length Drum Type Product weight per metre gms Bundle OD mm Generic Specification 5/3.5mm 685 1DI 4000m G MHT DI 4000m MB x 13.4 MHT DI 4000m 1.4D MHT DI 4000m 1.7D MHT DI 4000m.0D MHT DI 3000m.D MHT DI 000m.0D MHT175 10/8mm DI 000m G MHT DI 000m MB x3.4 MHT L 4DI 000m 1.7D MHT DI 000m.0D MHT888 1/10mm DI 000m MB MHT DI 000m 1.4D x7.3 MHT DI 000m.0D MHT DI 000m.35D MHT888 Direct Install metal free (DImf) It is essential that users of this product securely anchor the sheath and contents of the tube bundle to a fixed point (eg manhole side or duct mouth ) wherever the product emerges from a duct section. These duct sections should not be longer than 500m. Refer to specification MHT177. A simple sheathed bundle incorporating no metal, suitable for pulling into duct using moderate force. When using Emtelle Direct Install Metal Free Products adequate provision must be made to take account of all strain which may be caused by installation forces, practices and procedures, thermal changes, heat reversion or any other reasonably foreseeable force applied to the product. 6 Product Code 5/3.5mm Description Supply Length Drum Type Product weight per metre gms Generic Specification 831T 1DImf 4000m G 47 MHT T DImf 4000m MB5 71 MHT T 4DImf 4000m 1.4D 109 MHT LT 7DImf 4000m 1.7D 151 MHT T 1DImf 4000m.0D 4 MHT T 19DImf 4000m.35D 310 MHT DImf 000m.0D 410 MHT177

29 FibreFlow FROM EMTELLE Tube bundle - tight FibreFlow protected from microduct EMTELLE Aerial Tube Bundle Figure-8 construction with steel and glass reinforced strength member. All compatible fittings are available. Emtelle recommends that the customer checks and ensures that the products are suitable to be installed on existing route. In particular, it is essential that the customer verifies that existing or proposed cable supports (towers or poles) are sufficiently robust and suitable to carry the required clamps and cable. Product Code Description Microduct Size Supply Length Drum Type Product weight per metre gms Generic Specification F8 4/.5mm + 1x1/8 000m.0D 485 CP F8 4/.7mm 4000m 1.7D 57 CP F8 4/.7mm 4000m.0D 317 CP F8 4/.7mm 3000m.0D 383 CP F8 4/.7mm + 1x1/10 000m.0D 458 CP F8 4/.7mm + 1x8/6 000m.D 54 CP Drop 5/3.5mm 1000m 700 ply 4 MHT1470C Drop 5/3.5mm 5000m G 36 CP F8 5/3.5mm 4000m.0D 313 CP F8 5/3.5mm 4000m.D 367 MHT F8 5/3.5mm + 1x10/8mm 000m.0D 449 CP F8 5/3.5mm + 1x1/10mm 000m.0D 456 CP F8 5/3.5mm 000m.0D 453 CP F8 5/3.5mm + 1x10/8mm 000m.0D 450 CP F8 5/3.5mm + 1x10/8mm 1000m 1.7D 576 CP F8 5/3.5mm 000m.D 549 CP Drop 6/.7mm 4000m E 6 CP F8 6/.7mm + copper 000m E 36 CP F8 6/.7mm + copper + PIFU 000m E 37 CP F8 10/8mm 000m 1.7D 8 CP F8 10/8mm 1000m 1.7D 486 CP915 TBC 4F8 10/8mm 000m.D 486 CP F8 10/8mm 1000m.0D 606 CP F8 1/10mm 1000m 1.7D 401 CP F8 1/10mm 1000m.0D 676 CP F8 14/10mm 1000m MB5 316 CP1019 7

30 FibreFlow from Tube EMTELLE bundle - tight protected microduct Aerial Tube Bundle Aerial Metal Free / GRP Single drop and Figure 8 construction with GRP strength member. These products have no metallic elements. Product Code Description Microduct Size Supply Length Drum Type Product weight per metre gms Generic Specification F8MF 5/3.5mm 000m 1.4D 37 CP F8MF 5/3.5mm 000m 1.7D 303 CP F8MF 5/3.5mm + 1x10/8mm 000m.0D 37 CP F8MF 5/3.5mm + 1x10/8mm 1000m 1.7D 367 CP Universal Drop Tube 7/3.7mm 1000m HH 31 CP F8MF 8/5mm 1000m G 199 CP F8MF 10/8mm 1000m 1.7D 43 CP F8MF 1/10mm + 8x5/3.5mm 000m.D 451 CP F8MF 14/10mm 1000m 1.4D 0 CP104 8

31 FibreFlow FROM EMTELLE Tube bundle - tight FibreFlow protected from microduct EMTELLE Low Fire Hazard (LFH) Assembly of LFH microducts, each with low friction performance and suitable for fibre blowing. Each assembly is surrended with a sheath of LFH material suitable for indoor fire regulation use and giving excellent performance in fire scenario. Microducts are considered as cable management systems by EN series standards and are therefore not subject to the CPR system. This has been formally stated by BSI and German national standards bodies. BS EN Conduit Systems for Cable Management is therefore used by Emtelle to verify our products for internal use. This includes a flame propagation test. Additionally Emtelle have carried out testing to IEC and in some cases IEC Low flammability Halogen free Low smoke Product Code Description Supply Length Drum Type Product weight per metre gms Bundle OD mm Generic Specification 4/.5mm LFH 4000m HH MHT LFH 4000m F 65 6./10. MHT LFH 4000m 1.D MHT LFH 4000m 1.4D MHT LFH 4000m 1.7D MHT LFH 4000m.0D MHT LFH 4000m.D MHT617 5/3.5mm 6318 Primary 500m 350 ply MHT Primary 1000m 450 ply MHT Primary 4000m HH MHT LFH 1000m 700 ply MHT S LFH 500m 600 ply 80 7./1. MHT LFH 1000m 700 ply 80 7./1. MHT LFH 4000m G 80 7./1. MHT LFH 500m E 16 1./14.3 MHT LFH 1000m F 16 1./14.3 MHT LFH 4000m 1.4D 16 1./14.3 MHT LFH 500m E MHT LFH 1000m G MHT LFH 4000m 1.7D MHT S 1LFH 500m F MHT LFH 1000m MB MHT A 1LFH 4000m.0D MHT S 19LFH 500m G MHT LFH 1000m 1.4D MHT A 19LFH 4000m.D MHT LFH 500m MB MHT LFH 1000m 1.7D MHT43 661L 4LFH 000m.0D MHT43 9

32 FibreFlow from Tube EMTELLE bundle - tight protected microduct Low Fire Hazard (LFH) Product Code Description Supply Length Drum Type Product weight per metre gms Bundle OD mm Generic Specification 7/4mm 6191 Primary 1000m PIFU 39 7 CP Primary 000m HH 39 7 CP LFH 000m F CP LFH 000m G x 16. CP LFH 000m MB CP LFH 000m 1.7D CP LFH 000m.0D CP LFH 1000m 1.7D CP LFH 1000m.0D CP141 14/10mm Primary 500m HH CP Primary 1000m HH CP LFH 1000m MB x 16.5 CP LFH 1000m 1.4D CP LFH 1000m 1.7D CP LFH 1000m.0D CP LFH 1000m.0D CP

33 FibreFlow FROM EMTELLE Tube bundle - tight FibreFlow protected from microduct EMTELLE FibreFlow Tube Bundle - Tight Protected Microduct FibreFlow Invictus Product code 3070 FibreFlow Invictus can be delivered on a drum, or in a coil allowing for easy delivery to site and quick installation the product can be laid straight into the trench from the drum or coil trailer. The added strength within the Invictus product allows it to be buried at half the depth, with as dug material used as backfill. When compared to the traditional UK highways method of a 900mm deep trench with virgin backfill material, FibreFlow Invictus offers hige cost and time savings from installation perspectives. In some circumstances, deploying FibreFlow Invictus will enable contractors to double the length of installs per day. Why use FibreFlow Invictus: Ideal for city builds/feeder for FTTH Long lengths (300m coils) Cables cabe blown/pushed/pulled Traditional sized ducts for easy training Very strong Lays very straight Huge fibre capacity 5, 3, 35, mm duct sizes available Scan the QR-code with your smartphone and watch the FibreFlow Invictus video. 31

34 FibreFlow from Tube EMTELLE bundle - tight protected microduct Special Products Emtelle can produce many different solutions depending on the customer s specifications. Some examples of special tube bundle include:- Mining Applications What for? Mining Description Microduct size Product weight Bundle Od mm g/m Specification Product Code 7DBSA 5/3.5mm.8mm 39 MHT DBSA-LF 5/3.5mm 6mm 607 CP F8 hybrid with copper cable 5/3.5mm 15.5mm(w) x 8.5mm(h) 358 CP Direct Bury Rodent Resistant (Corrugated Steel Tape) What for? Rodents & strength Assembly of 7 PE microducts surrounded with a polymer filling layer, a protective layer of corrugated steel (very effective against rodents) and a heavy duty PE outer sheath. DBR metal free rodent resistant products are available, please contact your local Emtelle representative for further information. Description Microduct Bundle Od mm 7DBSA 5/3.5mm.8mm 39 MHT1781 Product weight g/m Specification Product Code Supply Length m 844B 000m LFH Rodent Proof (corrugated steel tape) What for? Internal rodents & strength Assembly of 7LFH microducts surrounded by a sheath of LFH, a protective layer of corrugated steel (very effective against rodents) then a secondary LFH sheath. Description Microduct size Product weight Bundle Od mm g/m Specification Product Code 7LFSA 5/3.5mm 3mm 470 MHT PELFSA 1/9.6mm 38mm 868 CP Other products may be available, please contact info@emtelle.com for further information. We specialise in tailor made products, What can we make for you? specific to customer and project. 3

35 FibreFlow FROM EMTELLE Tube bundle - tight FibreFlow protected from microduct EMTELLE Special Products LFH pinnable What for? MDU LFH microducts surrounded by a profile extrusion in LFH providing a web to allow the product to be pinned or clipped to a wall. Description Microduct Size Bundle Od mm Product weight g/m Specification Product Code 1LFH pinnable 3/.1mm 6.0x CP LFH pinnable 3/.1mm 6.0x CP PE-LF What for? MDU Emtelle have developed a range of microducts which have an LFH sheath applied over conventional PE microducts (PE-LF) and which offer enhanced fire performance compared with all-pe products. For indoor installations where only moderate LFH performance is required, and where local fire regulations reflect this, then the FibreFlow PE-LF microduct range (MHT1757 and MHT618) may be the solution. These bundles are designed to pass the IEC vertical flame spread test, similar to VW-1. Please contact your local Emtelle representative for further information. PE-LF pinnable What for? MDU PE microducts surrounded by a profile extrusion in LFH providing a web to allow the product to be pinned or clipped to a wall. Description 4PE-LF pinnable 7PE-LF pinnable Microduct Size Bundle Od mm Product weight g/m Specification Product Code 3/.1mm 5.4x CP /.1mm 8.7x CP Direct Bury filled metal free (DBfmf) What for? Where extra protection is needed Emtelle was the first to introduce a Metal Free range of Tube Bundles using a filling polymer between the outer sheath and the microducts providing even compression resistance and improved roundness and concentricity of the individual microducts. Main benefits of the DB(fmf) products; Roundness of the Tube Bundle is secured Protection against; Kinking and Crush, Better handling characteristics in the field once HDPE sheath is removed Description Microduct Size Supply Length Drum Type Product weight per metre gms Generic Specification Product Code 3DBfmf 10/8mm 000m 1.7D 483 MHT DBfmf 10/8mm 000m.0D 543 MHT DBfmf 10/8mm 000m.0D 619 MHT DBfmf 10/8mm 000m.D 699 MHT DBfmf 1/10mm 000m.0D 611 MHT DBfmf 1/10mm 000m.D 684 MHT DBfmf 1/10mm 000m.35D 751 MHT DBfmf 1/10mm 1000m.0D 876 MHT

36 FibreFlow from Tube EMTELLE bundle - tight protected microduct Special Products Mole Plough Installation Emtelle have provided these products to many Rural and Community Broadband Projects. DBmf Sub-duct 4 x 1/10mm 5/17mm 7 x 1/10mm 1 x 5/0 and x 14/10mm x 5/0 3/0mm FibreFlow Vertex The Emtelle Vertex product range of FibreFlow Tube Bundles have been designed for installation into Microtrench and Slot Cut Installations. These products are narrow to enable the trench width to be narrow, which increases Trenching speed and therefore reduces trenching costs. Emtelle have been supplying Blown Fibre products for Microtrenching for over 1 years. Emtelle also supply accessories for Microtrenching such as narrow Marker Tapes, Direct Buried Connectors and have Tube Bundles which can accommodate Fibre Cables from fibres up to 88 fibres for Microtrench applications. Product Code Description Supply Length Drum Type Product weight per metre gms Bundle OD mm Generic Specification 6/3.5mm 67 1DBmf 4000m.D x 17.0 CP1970 7/3.5mm DBmf 000m.0D x 16. CP015 1/8.5mm 615 6DBmf 000m.0D x 14. CP /10mm DBmf 1400m.0D x 16. CP DBmf 1400m 1.4 D x16. CP DBmf 1400m 1.7D x 16.0 CP DBmf combo 1400m 1.4D CP DBmf 1400m.0D x 16. CP /10mm DBmf combo 1000m 1.4D x 17.6 CP183 Vertex powered by FibreFlow Scan the QR-code with your smartphone and watch the Vertex video. 34

37 FibreFlow FROM EMTELLE Tube bundle - tight FibreFlow protected from microduct EMTELLE Special Products Fusion Product Emtelle FibreFlow Fusion products consist of a combination of (different size) microducts to allow both fibre-unit and fibre mini-cables to be installed into the network using the same microduct bundle. This type of product is ideal for daisy-chaining a number of more remote communities or outlying areas further away from the main network trunking routes. This type of product can usually be supplied suitable for DI, DB, Indoor or Aerial bundles. Please contact us via info@emtelle.com to discuss your requirements further. The different DIS products have been designed specifically for installation into existing HDPE ducts or PVC ducts. The outer sheath has been manufactured with a special reduced friction skin to allow for greater installation distances whilst pushing or pulling. Product Code Product description Microduct size Product Weight (g/m) Supply Length Bundle OD (mm) Data-Sheet WAY DISMF 5/3.5mm + 10/8 COMBO 3 WAY DISMF 10/8mm + 5/3.5 COMBO 1 WAY DBmf 7/4 + 1x 14/10 COMBO 10 WAY DBmf 8/5 + 1x 18/14 COMBO 9x 5/3.5 1x 10/ MHT989 3x 10/8 3x 5/ MHT857 1x 7/4 1x 14/ x 35.9 CP x 8/5 1x 18/ CP WAY DB 5/ x 10/8 COMBO 1x 5/3.5 3x 10/ CP WAY DImf 5/ x 16/13 COMBO 13x 5/3.5 1x 16/ CP803 35

38 FibreFlow from Tube EMTELLE bundle - tight protected microduct Special Products Microduct & Cable Combinations Emtelle FibreFlow Hybrid products consist of a combination of (different size) microducts, fibre unit/mini-cable elements, and/or copper cable elements such as power cables or cat-5/6. This exciting product range are designed for specific customer applications, but can be modified easily to suit. The possibilities are endless and show the flexibility of the FibreFlow solution. Typical applications are: Powering remote CCTV cameras Underground mining applications elemetry Please find a small selection below. This type of product can usually be supplied suitable for DI, DB, Indoor or Aerial bundles. Please contact us via info@emtelle.com to discuss your requirements further. Product code 610 Product description 4 WAY Fig-8 Hybrid with copper cable Micro duct size 4x 5/3.5 Copper elements x.5mm² 1x 0.5mm² 1x Cat5e Fibre Elements Product Weight (g/m) Supply Length Bundle OD (mm) Data- Sheet M 15.5 x 8.5 CP1159 TBC 6mm DIS Hybrid - 1x 6mm² 4F M 9.0mm CP306 TBC 1 WAY Fig-8 3x4.0mm Hybrid 1x 3/.1 1x 5/3.5 3x 4.0mm² 1x Cat5e M 17.0x7.0 CP WAY Fig-8 6/.7mm + 1x Twisted Paid Hybrid 1x 6/.7 1x twisted copper pair M 6.0x10.0 CP1138 TBC 9 WAY 3/.1mm + 60F ADSS Hybrid 9x 3/.1-1x 1-7F Mini-Cable M 16.0 CP67 TBC 7 WAY Fig-8 5/3.5mm + 144F Hybrid 7x 5/3.5-1x 144F Mini-Cable 6x 8F M 7.5 x 46.5 CP485 TBC WAY DB 14/10mm + x.5mm Hybrid x 14/10 x.5mm² 1x 0.5mm² M 16.0 x 30.0 CP WAY DISMF 1/10 + x96f G657A1 Hybrid x 1/10 4x 4/.5 - x 96F G657A1 Mini-Cable M 7.3 CP We specialise in tailor made products, What can we make for you? specific to customer and project. 36

39 FibreFlow FROM EMTELLE Tube bundle - tight FibreFlow protected from microduct EMTELLE Pre-cabled ducts and microducts Pre-cabled Sub Ducts Both traditional fibre optic and fibre mini-cables are available as a pre-installed product. Lengths of up to 10km are available dependent on the cable type and materials. Emtelle can produce various combinations of a single fibre cable in HDPE duct. This cable can be removed at a later date and upgraded as required. This configuration particularly favours fairly long-distance fibre-to-the-home (or building or MDU) deployment where neither the duct nor fibre cable are previously in place, and future installations or extensions may be called for. These product combinations are designed for direct burial in suitably prepared ground. Common typical features Loose tube metal free constructions Water blocked using gel filled tubes and dry water swellable elements Central strength element Storage and operating temperature: -30 C to +65 C Specifications (all types) Available fibre types: Singlemode ITU-T G.65d, ITU-T G.655, ITU-T G.657A1, Multimode A1 (IEC ) Fibre and tube colours: normally EIA 598 or EN Cable tested to IEC Micro Trenching Mole Ploughing Overhead Cable Type Cable Diameter HDPE Duct Size (OD)/(ID) HDPE Duct Size (OD) HDPE Duct Size (OD) (Plus web) Fibre Bundle Micro Cable Mini Cable Conventional Fibre Cable Fibre Bundle 1.1mm 8/3.5mm 16/10mm 6/.7mm 4 Fibre Bundle 1.1mm 8/3.5mm 16/10mm 6/.7mm 6 Fibre Bundle 1.3mm 8/3.5mm 16/10mm 6/.7mm 8 Fibre Bundle 1.5mm 8/3.5mm 16/10mm 7/3.7mm 1 Fibre Bundle 1.6mm 8/3.5mm 16/10mm 7/3.7mm 4 Fibre Micro Cable.8mm 10/6mm 5/17mm 8/5mm 4-7 Fibre Mini Cable 6.0mm 16/10mm 5/17mm 10/8mm 96 Fibre Mini Cable 7.mm 0/16mm 5/17mm 16/1mm 144 Fibre Mini Cable (4 Fibres / Tube) 7.9mm 0/16mm 5/17mm 16/1mm 144 Fibre Mini Cable (1 Fibres / Tube) 9.mm 0/16mm 5/17mm 18/14mm 88 Fibre Mini Cable (1 Fibres / Tube) 10.5mm 0/16mm 3/0mm 0/16mm 1 Fibre Cable 10-1mm 31/5mm 31/5mm 5/0mm 4 Fibre Cable 10-1mm 31/5mm 31/5mm 5/0mm 36 Fibre Cable 10-1mm 31/5mm 31/5mm 5/0mm 48 Fibre Cable 10-1mm 31/5mm 31/5mm 5/0mm 60 Fibre Cable 10-1mm 31/5mm 31/5mm 5/0mm 7 Fibre Cable 10-1mm 31/5mm 31/5mm 5/0mm 96 Fibre Cable 10-1mm 31/5mm 31/5mm 5/0mm 18 Fibre Cable 1-14mm 31/5mm 31/5mm 5/0mm 144 Fibre Cable 1-14mm 31/5mm 31/5mm 5/0mm 88 Fibre Cable 14-16mm 37/31mm 37/31mm 3/6mm 0 pair 0.9 Copper NA 50/4mm 50/4mm N/A 50 pair 0.9 Copper NA 50/4mm 50/4mm N/A 100 pair 0.6 Copper NA 50/4mm 50/4mm N/A 100 pair 0.9 Copper NA 63/50mm 63/50mm N/A Ducts can be strengthened if required. Some large ploughs require larger sub-duct sizes. Other products are available. For further information on pre-cabled duct please contact us on info@emtelle.com. 37

40 FibreFlow from Tube EMTELLE bundle - tight protected microduct Pre-cabled ducts and microducts PIFU - Pre installed Fibre Unit Emtelle can supply a large variety of protected microducts (refer to page 0 for details) which can be pre-installed with various types of Emtelle Microcable FU (with or without a low friction sheath). PIFU is an ideal product for FTTH drops to homes as it is quick to repair and replace the fibres in an event where physical damage has occurred. The products in the table below are an example of the products we can supply. Other products may be available, please contact us on info@emtelle.com for further information. Product Code Description Low friction FU sheath Type Colour Standard Length /3.5mm + PIFU MM OM3 x 1000m yes MM OM3 blue, orange /3.5mm + PIFU G65d x 1000m yes G65d blue, green 1000m /3.5mm + 4 PIFU G65d x 1000m yes G65d blue, green /3.5mm + PIFU G657A1 x 000m no G657A1 blue, green 000m 38

41 FibreFlow FROM EMTELLE Tube bundle - tight FibreFlow protected from microduct EMTELLE RTRYVA - Retractable Fibre System RTRYVA The Emtelle RTRYVA product range is available for installation in Direct Buried applications and for Indoor applications. These products are small and lightweight and can be supplied with 1, 4 or 48 fibre tubes within the duct. Each fibre tube can have or 4 fibres. The RTRYVA products can be window cut at the customer drop location, a fibre tube retracted, then pushed / pulled into an Emtelle drop tube, to the customer s premises. External Our RTRYVA MDU for internal use is manufactured out of LFH material giving excellent performance in a fire scenario. Please contact us on info@emtelle.com for more information. Internal 1f 4f 48f Scan the QR-code with your smartphone and watch the RTRYVA video. Product Code Description Supply Length Fibre type No. fibres Drum Type Material Spec Ref RTRYVA 15/9mm 500M G657A 1x FU 1.4D HDPE CP RTRYVA 15/9mm 500M G657A 4x FU 1.4D HDPE CP RTRYVA 15/9mm 500M G657A 1x FU 1.4D HDPE CP509 RTRYVA MDU 6380 RTRYVA 15/9mm 500M G657A 1x FU 1.4D PEFR CP RTRYVA 15/9mm 500M G657A 4x FU 1.4D PEFR CP RTRYVA 15/9mm 500M G657A 1x FU 1.4D PEFR CP73 Please also consider the following accessories: Product Code Description Spec. Ref RTRYVA TOOL TO MAKE WINDOW CUT TO 8 & 15MM UK_DS_ RTRTYVA TOOL TO MAKE WINDOW CUT 15 &0MM UK_DS_ RTRYVA EXTRACTION TOOL UK_DS_

42 FibreFlow from Tube EMTELLE bundle - tight protected microduct RTRYVA EMU Box EMU box Emtelle have designed and constructed the EMU box to suit many requirements for FTTH and FTTP projects. It has been designed for bend insensitive fibre management and is versatile to give many different uses. The EMU box is a compact multipurpose closure that can accommodate both patch connections and splices (Fusion and Mechanical). The EMU boxes are also commonly used to breakout and distribute the fibres from Emtelle s Ø15mm RTRYVA solution. Product Code Description IP-Rating Seals Colour Spec Ref. 779 EMU RTRYVA Closure BLACK 4x 3-8mm Seals IP-67 4x 3-8mm double seal Black UK_DS_ EMU RTRYVA Closure BLACK x 3-8mm double seals + x 15mm single seals IP-67 x 3-8mm double seal + x 15 single seal Black UK_DS_ EMU RTRYVA Closure CREAM / LFH 4x 3-8mm Seals IP-67 4x 3-8mm double seal Cream UK_DS_ EMU RTRYVA Closure CREAM / LFH x 3-8mm double seals + x 15mm single seals IP-67 x 3-8mm double seal + x 15 single seal Cream UK_DS_ EMU RTRYVA Closure GREY x 3-8mm double seals + x 15mm single seals IP-67 x 3-8mm double seal + x 15 single seal Grey UK_DS_779 Other seal sizes may be available on request. 40

43 FibreFlow FROM EMTELLE Tube bundle - tight FibreFlow protected from microduct EMTELLE FibreFlow Tube Bundle - Pre-installed Fibre MULTIFU Assembly of PE microducts each containing a fibre unit. The assembly (bundle) is surrounded by an outer sheath that is suitable for direct burial in suitably prepared ground. This product reduces the need to use specialist blowing equipment when connecting customers. MULTIFU products can be partially or fully populated depending on customer uptake. Why use Multifu? Reduce CAPEX per home passed and home connected on Day 1 Easy to install, assemble and use products Reduce the skill requirements Minimise installation time and reduce failure rate Increase roll out speed Lower upgrade and maintenance costs for the life time of the network Adapted for low cost construction techniques Narrow trench Shallow depth burial MULTIFU Product Code Description Microduct Size Supply Length Drum Type Product weight per metre gms Bundle OD mm Generic Specification DBmf mpifu FU G657A1 4/.1mm D CP DBmf mpifu FU G657A 4/.1mm D CP DBmf mpifu 4FU G657A1 4/.1mm D CP DBmf mpifu FU G657A1 4/.1mm D CP DBmf mpifu FU G657A 4/.1mm D CP DBmf mpifu 4FU G657A1 4/.1mm D CP153 Scan the QR-code with your smartphone and watch the MULTIFU video. 41

44 FibreFlow from Tube EMTELLE bundle Loose Protected Microduct Loose protected microducts (see example illustrated below) are suitable for high fibre-count minicables. This tried and tested technology has been deployed over thousands of kilometres, providing excellent installation characteristics for cables from 4 to 144 fibres. The loose protected microduct solution comprises a range of microduct that are composed of standard, strong HDPE tubing as the outer duct, with a super smooth silicone coating inside. This outer duct provides complete protection of cables before, during and after installation. The smooth silicone coating remains in the duct to facilitate future repairs and/or replacements. Loose protected microducts offer many advantages, including: Ease of installation Optimum impact resistance for maximum durability and performance Freedom of choice when choosing micro-duct configuration Optimal utilisation of cable networks with minimal expansion costs Option to upgrade networks in step with the development of new fibres Colour coding that facilitates the identification of different routes Customer-specific duct lengths Excellent blowing performance The subducts can be supplied as: Standard HDPE (smooth exterior and interior) HDPE with smooth interior silicone coating HDPE with ribbed interior HDPE with ribbed interior silicone coating The illustration shows the difference between the two types of cable installation. The new microduct technology has been applied to the orange duct, with the microducts loosely installed in the HDPE duct. The minicables with the required number of fibres can subsequently be installed individually in the microducts. Traditional technology has been used for the red duct and only a single fibre cable has been installed; installations of this kind often fail to make full use of the duct capacity. Configure the loose protected microduct according to your own wishes. Free combination of microducts 14, 1, 10, 7 and 5mm, fibre cables and copper cables. other configurations can be made upon request. rule of thumb: Filling area above 60% generally reduces fibre blowing lengths. option: loose protected microduct can be made with a combination of microducts and fibres. It is possible to install a number of microducts in a subduct. The actual number depends on the number and diameters of the microducts. Some examples are listed below. Examples Microduct w/silicone + ribs 3mm 40mm 50mm 3 x 10 mm 5 x 10 mm 10 x 10 mm 4 x 10 mm 6 x 10 mm 7 x 10 mm x 1 mm 4 x 1 mm 7 x 1 mm 3 x 14 mm 6 x 1 mm 1 x 1 mm + 9 x 10 mm x 1 mm + 8 x 10 mm 3 x 1 mm + 6 x 10 mm 4 x 1 mm + 5 x 10 mm 5 x 14 mm 3 x 16 mm 4 The availability of a 1mm Lock & Block kit means that Loose Protected Microduct can now successfully be used with Microcable FU. For further details refer to pages 11 and 81.

45 FROM EMTELLE FibreFlow from Tube EMTELLE bundle Storage and Handling 1. FibreFlow TUBE BUNDLES TEMPERATURE & STORAGE The tube bundles and packaging materials are resistant to a wide temperature range. Packaging materials are provided to protect products prior to installation. Emtelle stipulate that the packaging supplied should remain in place until the product is installed. If packaging needs to be replaced, please contact Emtelle for details of suitable materials for re-packaging. Prolonged storage outdoors may reduce the performance of the tube bundles. If the client requires products to be stored for periods of over 3 months prior to installation, it is a requirement that they inform Emtelle so that product and packaging specifications can be amended to suit.. TUBE ASSEMBLY STORAGE AND HANDLING / INSTALLATION Poly Ethylene (PE) products, e.g. Direct Install (DI), Direct Bury (DB), Direct Bury Reinforced (DBR) are best stored between -40 C and +60 C (Product temperature, not air temperature), and handled between -0 C and +40 C. If stored outdoors, we recommend they are stored out of direct sunlight, and installed within 3 months of delivery. In some countries storage in direct sunlight, can cause the temperature of the products to increase to over +60 C. This will invalidate the product warranty. Individual Microducts, both Poly Ethylene (PE) and Low Fire Hazard (LFH) should be stored indoors. These products are wrapped in black film and bubble wrap after manufacture. This protective packaging should remain in place until installation. Individual microducts should not be exposed to direct sunlight. LFH products can be stored between -0 C and +60 C and handled for installation between 0 C and+40 C. Handling/installation outside this temperature range can result in tube softening, distorting and possibly cracking. Please note that the maximum air pressure used when fibre bundle blowing in LFH products is 10 bar / 150psi with a maximum tube temperature of +40 C. 3. TEMPERATURE VARIATION: As stated above, Emtelle tube bundles can be stored in a temperature window of -40 C and +60 C. Though the tube bundles can accommodate these temperatures, however in some countries the product temperature between day time and night time can vary by 40 C or more. In these circumstances, the outer coils of the tube bundle on the drum will experience high levels of thermal expansion and contraction. This extreme temperature cycling can cause product failure or deterioration in performance. If this type of temperature cycling cannot be avoided then Emtelle should be informed so that they can provide advice and options for safe storage of the product. 4. TUBE ASSEMBLIES IN OPERATION Once the tubing assemblies are in their fixed operational location, they can be subject to the storage temperatures quoted above, provided that there is no significant continuous flexing of the tube assemblies. Most installations are laid in underground ducts and so see minimal variation in position or temperature. Minimum temperatures of -40 C are permissible after installation. Assemblies located in outdoor (e.g. overhead) routes will experience temperature cycling and expand and contract with the weather and there will be considerable continuous flexing of the tube assemblies. Consult Emtelle for advice on the correct product to use in this situation. Products intended for underground installation e.g. direct burial or direct install products which are installed above ground, (i.e., up walls) should be covered with a suitable UV protective material to eliminate the risk of UV degradation. 5. HANDLING PRODUCT AND OFF-LOADING Our products are loaded into containers using Rhino horns or forklifts with extendable arms. A normal forklift or tractor with attachments can be used if care is taken. Please carry out risk assessments and ensure you have effective lifting equipment ready for the unloading of trucks or containers.(as shown below) Please note the following when offloading: Do not off-load near overhead power lines. Ensure a safe location for off-loading flat, firm, level ground, free from obstacles and obstructions. Only authorised personnel should be in the vicinity during off-loading operations. It is the responsibility of the driver of the off-loading vehicle to ensure all personnel are kept at a safe distance whilst off-loading. Pallets, drums or loose lengths should not be dropped or thrown from the vehicle. Duct in coil form contains a great deal of stored energy and should be handled with care. Particular care should also be taken to avoid any damage to the restraining straps. In wet and frosty conditions duct and drums can become very slippery; therefore care is required when operating in these conditions. There must be provision made when storing products externally that they are adequately handled with the use of forklifts and drum handling equipment. All drums should be secured in position using adequate fixings. Drums should be stacked no more than 3 metres high. Tube bundles which are being batched down at the customer s premises should be rewound using a power pay-off. All free ends of tube bundles should be sealed using heat shrink end caps. These are available from Emtelle if required. While every care is taken during loading, Emtelle cannot accept responsibility for the security of the load once it leaves our site. Drivers must secure their loads before leaving the factory, as under the terms of the Road Haulage Association they are responsible for the security of the load. The drums must be stored on a level, hard surface above flood level and must be secured with chocks to prevent the drums from rolling away. Avoid contact with sharp rocks. Do not lay the drums flat, the drums must be stored as pictured below. 6. UNSPOOLING THE TUBE BUNDLES The tubes and tube bundles supplied by Emtelle are supplied in coils or on drums. When uncoiling the products, the drums should be slowed to freely rotate (preferably using a drum trailer as shown below), so the products is unwound without any excess coiling. Never lay the drum or coil on its side and pull the tube bundles off the top, as this will induce a corkscrew twist (as shown in the photographs below), possible distortion and cause problems during installation and blowing. The best practice is to install drums onto drum trailers as pictured: Tube bundles should not be uncoiled off the top of the drum (as shown below) 43

46 FibreFlow from Accessories FROM EMTELLE 44

47 FROM EMTELLEFibreFlow FibreFlow Tools and from Consumables EMTELLE Connectors 45

48 FibreFlow from Accessories EMTELLE Connectors Straight connectors Microduct outer diam - mm Connector through bore diam - mm Solid colour Product codes clear Direct Bury Straight connectors Microduct size (both ends) Product codes outer diam - mm inner diam - mm Solid colour clear B Reducers Microduct outer diam - mm Connector inner diam - mm Microduct outer diam - mm Connector inner diam - mm Solid colour Product codes clear (¼ )

49 FROM EMTELLE FibreFlow from Accessories EMTELLE Connectors End Cap Product Code Size Solid colour clear 3mm mm mm 71 6mm mm 606 8mm mm mm mm mm 7740 Direct Bury End Cap Size Product Code 7mm mm Closedown This connector is to protect fibre where a centre blow has taken place. The closedown covers the fibre and both ends of the break in the microduct. Size Product Code 3mm mm 749 8mm

50 FibreFlow from Accessories EMTELLE Connectors Gas Block Connectors An active gas block (GB) connector has an internal seal that can be open to permit blowing through, or closed so the seal contacts the fibre and prevents the flow of gas. Microduct size mm Description Product Code Fibre cable size range Approx mm Gas block seal colour 3mm 3GB long mm 3GB short mm 4GB mm 5GB 6091 FU 6mm 6GB 710 FU 6-3mm reducer 6-3GB FU 6-4mm reducer 6-4GB FU 7mm 7GB FU 7mm 7GB Red 7mm 7GB Blue 8mm 8GB 6086 FU 8-5mm 8-5GB 6087 FU 10mm 10GB Green 10mm 10GB Red 1mm 1GB Green 1mm 1GB Red 1mm 1GB Blue 14mm 14GB Red 14mm 14GB Blue Water-blocking Connector 3mm mm 6089 These connectors are used at the end of a fibre unit (fu) length, usually inside the building, to prevent water from travelling along the tube and into the building. The passive water blocking types have a fixed aperture size in the seal, the fibre unit being pushed through by hand after blowing is complete. For these it is best to select an item with a suitably sized seal, to give a snug fit. We quote the size range of fibre unit or cable that each water blocking connector can accept and properly seal onto. Tube size one end Tube size other end Capacity fu or fc diam Product code 3mm 3mm FU mm 5mm push-on FU mm 3mm FU Slimline Bulkhead A connector used mainly in rack systems to manage microducts 48 Size Product Code 5mm 748

51 FROM EMTELLE FibreFlow from Accessories EMTELLE Microduct Connectors Emtelle provides an extensive range of standard and direct buried push-fit connectors for the FibreFlow system. These connectors are provided with outer shells in either acrylate (clear) or polypropylene (solid colour). The different materials provided are to suit customer s preferences or applications. All connectors supplied by Emtelle conform to our specification MHT860. Straight connectors Straight connectors are used to join microducts having the same OD and ID. Take note of both the outer and inner diameter of the microduct to be connected. eg 8/6 connectors are unsuitable for 8/3.5 microduct. Some connectors are available pre-fitted with clip-on protectors to enable direct burial for FTTH drop zones. Microduct size (both ends) outer diam - mm inner diam - mm Reducers Microduct outer diam - mm Product codes These connectors join microducts of different size. Check the microduct OD and ID. Microduct A Microduct inner diam - mm Microduct outer diam - mm Microduct B Microduct inner diam - mm Product codes

52 FibreFlow from Accessories EMTELLE Microduct Connectors End Cap End caps are used to seal an open tube and prevent dirt or water entry. Size Product Code 3mm 993 4mm mm mm mm mm mm mm mm mm Direct Buried Connectors There are situations with drops to a building where a joint is required in a rugged microduct. Since such a joint would be in domestic areas rather than industrial sites, a full closure to protect the microduct joint is not always deemed necessary. For these joints, we offer rugged connectors, and in two styles: Protected Connector DB (direct buriable) connector Protected Connectors The protected connector is a standard microduct connector pre-fitted with a removable outer shell. The product offers enhanced protection over an uncovered connector. These covers also fit over equivalent sized end-caps. Product code Microduct size Description /3.5mm Protected connector /5.5mm Protected connector 706 8/3.5mm Protected connector /6mm Protected connector /8mm Protected connector /10mm Protected connector /10mm Protected connector 50

53 FROM EMTELLE FibreFlow from Accessories EMTELLE Connectors Fibre and Micro cable seal Easy to install gas and watertight seal for cables in mini / micro ducts. Gas and Water tight up to 0,5 bar Suitable for retro fitting Easy installation No need to slide the seal over the fibre for installation Slim design Product Code Description Duct OD Seal Pack Quantity Seal Colour Cable Range 7133 Miniduct seal 4mm/0.9mm Per Bag Purple Miniduct seal 4mm/1.5mm Per Bag Red Miniduct seal 4mm/1.6mm Per Bag Green Miniduct seal 4mm/.1mm Per Bag Blue Miniduct seal 5mm/0.9mm Per Bag Purple Miniduct seal 5mm/1.5mm Per Bag Red Miniduct seal 5mm/1.6mm Per Bag Green Miniduct seal 5mm/.1mm Per Bag Blue Miniduct seal 6mm/0.9mm Per Bag Purple Miniduct seal 6mm/1.5mm Per Bag Red Miniduct seal 6mm/1.6mm Per Bag Green Miniduct seal 6mm/.1mm Per Bag Blue Miniduct seal 6mm/.5mm Per Bag Yellow Miniduct seal 7mm/0.9mm Per Bag Purple Miniduct seal 7mm/1.5mm Per Bag Red Miniduct seal 7mm/1.6mm Per Bag Green Miniduct seal 7mm/.1mm Per Bag Blue Miniduct seal 7mm/.5mm Per Bag Yellow Miniduct seal 8mm/0.9mm Per Bag Purple Miniduct seal 8mm/1.5mm Per Bag Red Miniduct seal 8mm/1.6mm Per Bag Green Miniduct seal 8mm/.1mm Per Bag Blue Miniduct seal 8mm/.5mm Per Bag Yellow

54 FibreFlow from Accessories EMTELLE Connectors Duct Sealing Divisible duct sealing sets developed to provide an effective and simple solution to all gas and watertight duct sealing requirements. The modular system enables installation in new and existing situations. Set contains plastic click shells, plastic cutting block, synthetic rubber plug. 5 Emtelle Product code Description MINI DUCT CABLE SEAL 10 (.5-1.5mm) Duct Size (OD) Cable Diameter MINI DUCT CABLE SEAL 10 (3.5-.5mm) MINI DUCT CABLE SEAL 10 ( mm) MINI DUCT CABLE SEAL 10 ( mm) MINI DUCT CABLE SEAL 10 ( mm) MINI DUCT CABLE SEAL 1 (.5-1.5mm) MINI DUCT CABLE SEAL 1 (3.5-.5mm) MINI DUCT CABLE SEAL 1 ( mm) MINI DUCT CABLE SEAL 1 ( mm) MINI DUCT CABLE SEAL 1 ( mm) MINI DUCT CABLE SEAL 1 ( mm) MINI DUCT CABLE SEAL 14 (1.5-.5mm) MINI DUCT CABLE SEAL 14 (3.5-.5mm) MINI DUCT CABLE SEAL 14 ( mm) MINI DUCT CABLE SEAL 14 ( mm) MINI DUCT CABLE SEAL 14 ( mm) MINI DUCT CABLE SEAL 14 ( mm) MINI DUCT CABLE SEAL 16 (.5-1.5mm) MINI DUCT CABLE SEAL 16 (3.5-.5mm) MINI DUCT CABLE SEAL 16 ( mm) MINI DUCT CABLE SEAL 16 ( mm) MINI DUCT CABLE SEAL 16 ( mm) MINI DUCT CABLE SEAL 16 ( mm) MINI DUCT CABLE SEAL 18 ( mm) MINI DUCT CABLE SEAL 18 ( mm) MINI DUCT CABLE SEAL 18 ( mm) MINI DUCT CABLE SEAL 18 ( mm) MINI DUCT CABLE SEAL 18 ( mm) MINI DUCT CABLE SEAL 0 ( mm) MINI DUCT CABLE SEAL 0 ( mm) MINI DUCT CABLE SEAL 0 ( mm) MINI DUCT CABLE SEAL 0 ( mm) MINI DUCT CABLE SEAL 0 ( mm) Size A (mm) Size B (mm) Supply qty (per box)