FCCC RF : ZTE APPLICANT EQUIPMENT BRAND NAME MODEL NAME FCC ID STANDARDD : WF722. The product was SPORTON. Page Number (KUNSHAN) INC.

Transcription

1 FCC RF Test Report 7 FCCC RF Test Report PPLICNT EQUIPMENT BRND NME MODEL NME FCC ID STNDRDD CLSSIFICTION : ZTE CORPORTION : HOME PHONE : ZTE : WF722 : SRQ-WF722 : FCC 47 CFR Part 2, 22(H), 24(E) : PCS Licensed Transmitter (PCB) The product was received on Jul. 04, 2013 and completely tested on Jul. 11, We, SPORTON INTERNTIONL (KUNSHN) INC., would like to declare d that the tested sample has been evaluated in accordance with the procedures given in NSI / TI / EI-603-C-2004 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNTIONL (KUNSHN) INC., the test report shall not be reproduced except in full. Reviewed by: Joseph Lin / Supervisor pproved by: Jones Tsai / Manager SPORTON INTERNTIONL (KUNSHN) INC. No. 3-2, PingXiang Road, Kunshan, Jiangsu Province, P.R. R.C. SPORTON INTERNTIONL (KUNSHN) INC. TEL : FX : Page Number : 1 of o 51 Report Issued Date : Jul. 29, 2013 Report Version : Rev. 01

2 TBLE OF CONTENTS REVISION HISTORY... 3 SUMMRY OF TEST RESULT GENERL DESCRIPTION pplicant Manufacturer Feature of Equipment Under Test Product Specification of Equipment Under Test Modification of EUT Maximum ERP/EIRP Power, Frequency Tolerance, and Emission Designator Testing Site pplied Standards TEST CONFIGURTION OF EQUIPMENT UNDER TEST Test Mode Connection Diagram of Test System Support Unit used in test configuration and system Measurement Results Explanation Example TEST RESULT Conducted Output Power Measurement Peak-to-verage Ratio Conducted Output Power and ERP/EIRP Measurement % Occupied Bandwidth and 26dB Bandwidth Measurement Band Edge Measurement Conducted Spurious Emission Measurement Field Strength of Spurious Radiation Measurement Frequency Stability Measurement LIST OF MESURING EQUIPMENT UNCERTINTY OF EVLUTION PPENDIX. SETUP PHOTOGRPHS SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 2 of 51

3 REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DTE FG Rev. 01 Initial issue of report Jul. 29, 2013 SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 3 of 51

4 SUMMRY OF TEST RESULT Report Section FCC Rule Description Limit Result Remark Conducted Output Power N/ PSS (d) Peak-to-verage Ratio < 13 db PSS (a)(2) Effective Radiated Power < 7 Watts PSS (c) Equivalent Isotropic Radiated Power < 2 Watts PSS (a) (b) Occupied Bandwidth N/ PSS (a) (a) Band Edge Measurement < 43+10log 10 (P[Watts]) PSS (a) (a) Conducted Spurious Emission < 43+10log 10 (P[Watts]) PSS (a) (a) Field Strength of Spurious Radiation < 43+10log 10 (P[Watts]) PSS Under limit db at MHz Frequency Stability for Temperature & Voltage < 2.5 ppm PSS - SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 4 of 51

5 1 General Description 1.1 pplicant ZTE CORPORTION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, , P.R.China 1.2 Manufacturer ZTE CORPORTION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, , P.R.China 1.3 Feature of Equipment Under Test Product Feature Equipment HOME PHONE Brand Name ZTE Model Name WF722 FCC ID SRQ-WF722 EUT supports Radios application CDM HW Version ddy SW Version USCC_M_WF722V1.0.0B01 EUT Stage Identical Prototype Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. 1.4 Product Specification of Equipment Under Test Product Specification subjective to this standard Tx Frequency CDM2000 BC0: MHz ~ MHz CDM2000 BC1: MHz ~ MHz Rx Frequency CDM2000 BC0: MHz ~ MHz CDM2000 BC1: MHz ~ MHz Maximum Output Power to ntenna CDM2000 BC0 : dbm CDM2000 BC1 : dbm ntenna Type Fixed External ntenna ntenna Gain 0.58 dbi for CDM2000 BC dbi for CDM2000 BC1 Type of Modulation QPSK SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 5 of 51

6 1.5 Modification of EUT No modifications are made to the EUT during all test items. 1.6 Maximum ERP/EIRP Power, Frequency Tolerance, and Emission Designator FCC Rule System Type of Modulation Maximum ERP/EIRP (W) Frequency Tolerance (%, Hz, ppm) Emission Designator Part 22 CDM2000 BC0 1xRTT QPSK ppm 1M28F9W Part 24 CDM2000 BC1 1xRTT QPSK ppm 1M28F9W 1.7 Testing Site Test Site SPORTON INTERNTIONL (KUNSHN) INC. No. 3-2, PingXiang Road, Kunshan, Jiangsu Province, P.R.C. Test Site Location TEL: FX: Test Site No. Sporton Site No. FCC/IC Registration No. TH01-KS 03CH01-KS /4086E-1 SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 6 of 51

7 1.8 pplied Standards ccording to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: FCC 47 CFR Part 2, 22(H), 24(E) NSI / TI / EI-603-C-2004 FCC KDB D01 Power Meas. License Digital Systems v02 FCC KDB D01 Determining ERP and ERIP v01 Remark: 1. ll test items were verified and recorded according to the standards and without any deviation during the test. 2. This EUT has also been tested and complied with the requirements of FCC Part 15, Subpart B, recorded in a separate test report. SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 7 of 51

8 2 Test Configuration of Equipment Under Test 2.1 Test Mode During all testing, EUT is in link mode with base station emulator at maximum power level. The spurious emission measurements were carried out in semi-anechoic chamber with 3-meter test range. Frequency range investigated for radiated emission is as follows: MHz to 9000 MHz for CDM2000 BC MHz to MHz for CDM2000 BC1. Test Modes Band Radiated TCs Conducted TCs CDM2000 BC0 1xRTT Link Mode 1xRTT Link Mode CDM2000 BC1 1xRTT Link Mode 1xRTT Link Mode Note: The maximum RF output power levels are 1xRTT RC1+SO55 mode for CDM2000 BC0 and CDM2000 BC1 on QPSK Link; only these modes were used for all tests. The conducted power table is as follows: Conducted Power (*Unit: dbm) Band CDM2000 BC0 CDM2000 BC1 Channel Frequency xRTT RC1+SO xRTT RC3+SO xRTT RC3 SO32(+ F-SCH) xRTT RC3 SO32(+SCH) SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 8 of 51

9 2.2 Connection Diagram of Test System 2.3 Support Unit used in test configuration and system Item Equipment Trade Name Model No. FCC ID Data Cable Power Cord 1. System Simulator R&S CMU 200 N/ N/ Unshielded, 1.8 m 2. DC Power Supply TOPWORD 3303DR N/ N/ Unshielded, 1.8 m 3. Telephone BUBUGOW HCD007(6082)TSD N/ N/ N/ SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 9 of 51

10 2.4 Measurement Results Explanation Example For all conducted test items: The offset level is set in the spectrum analyzer to compensate the RF cable loss and attenuator factor between EUT conducted output port and spectrum analyzer. With the offset compensation, the spectrum analyzer reading level is exactly the EUT RF output level. The spectrum analyzer offset is derived from RF cable loss and attenuator factor. Offset = RF cable loss + attenuator factor. Following shows an offset computation example with cable loss 4.8 db and 10dB attenuator. Example : Offset(dB) = RF cable loss(db) + attenuator factor(db). = = 15.2(dB) SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 10 of 51

11 3 Test Result 3.1 Conducted Output Power Measurement Description of the Conducted Output Power Measurement base station simulator was used to establish communication with the EUT. Its parameters were set to transmit the maximum power on the EUT. The measured power in the radio frequency on the transmitter output terminals shall be reported Measuring Instruments See list of measuring instruments of this test report Test Procedures 1. The transmitter output port was connected to base station. 2. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. Set EUT at maximum power through base station. 4. Select lowest, middle, and highest channels for each band and different modulation. 5. Measure the maximum burst average power for GSM and maximum average power for other modulation signal Test Setup SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 11 of 51

12 3.1.5 Test Result of Conducted Output Power CDM2000 BC0 Test Mode Test Status CDM xRTT RC1+SO55 Channel 1013 (Low) 384 (Mid) 777 (High) Frequency (MHz) Conducted Power (dbm) Conducted Power (Watts) CDM2000 BC1 Test Mode Test Status CDM xRTT RC1+SO55 Channel 25 (Low) 600 (Mid) 1175 (High) Frequency (MHz) Conducted Power (dbm) Conducted Power (Watts) Note: maximum average power for CDM2000. SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 12 of 51

13 3.2 Peak-to-verage Ratio Description of the PR Measurement The peak-to-average ratio (PR) of the transmission may not exceed 13 db Measuring Instruments See list of measuring instruments of this test report Test Procedures 1. The EUT was connected to Spectrum nalyzer and System Simulator via power divider. 2. Set the CCDF (Complementary Cumulative Distribution Function) option in spectrum analyzer. 3. The highest RF powers were measured and recorded the maximum PPR level associated with a probability of 0.1 %. 4. Record the deviation as Peak to verage Ratio Test Setup SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 13 of 51

14 3.2.5 Test Result of Peak-to-verage Ratio CDM2000 BC1 Modes CDM xRTT Channel 25 (Low) 600 (Mid) 1175 (High) Frequency (MHz) Peak-to-verage Ratio (db) SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 14 of 51

15 3.2.6 Test Result (Plots) of Peak-to-verage Ratio Band : CDM2000 BC1 Test Mode : 1xRTT_RC1+SO55 Link (QPSK) Peak-to-verage Ratio on Channel 25 ( MHz) RBW 10 MHz Ref 30 dbm Offset 15.2 db * tt 30 db QT ms 1 S CLRWR E-3 SGL LVL 1E-4 1E-5 Center GHz 2 db/ Mean Pwr + 20 db Complementary Cumulative Distribution Function ( samples) Mean Peak Crest Trace dbm dbm 4.08 db 10 % 1.92 db 1 % 2.96 db.1 % 3.56 db.01 % 3.92 db Date: 11.JUL :07:19 Peak-to-verage Ratio on Channel 600 (1880 MHz) RBW 10 MHz Ref 30 dbm Offset 15.2 db * tt 30 db QT ms 1 S CLRWR E-3 SGL LVL 1E-4 1E-5 Center 1.88 GHz 2 db/ Mean Pwr + 20 db Complementary Cumulative Distribution Function ( samples) Mean Peak Crest Trace dbm dbm 4.43 db 10 % 1.96 db 1 % 3.20 db.1 % 3.92 db.01 % 4.24 db Date: 11.JUL :06:56 SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 15 of 51

16 Peak-to-verage Ratio on Channel 1175 ( MHz) RBW 10 MHz Ref 30 dbm Offset 15.2 db * tt 30 db QT ms 1 S CLRWR E-3 SGL LVL 1E-4 1E-5 Center GHz 2 db/ Mean Pwr + 20 db Complementary Cumulative Distribution Function ( samples) Mean Peak Crest Trace dbm dbm 4.11 db 10 % 1.96 db 1 % 3.12 db.1 % 3.76 db.01 % 4.04 db Date: 11.JUL :08:00 SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 16 of 51

17 3.3 Conducted Output Power and ERP/EIRP Measurement Description of the Conducted Output Power and ERP/EIRP Measurement base station simulator was used to establish communication with the EUT. Its parameters were set to transmit the maximum power on the EUT. The measured power in the radio frequency on the transmitter output terminals shall be reported. The ERP of mobile transmitters must not exceed 7 Watts for Band 850. The EIRP of mobile transmitters must not exceed 2 Watts for Band ccording to KDB D01 Power pproach, EIRP = P T + G T L C, ERP = EIRP -2.15, where P T = transmitter output power in dbm G T = gain of the transmitting antenna in dbi L C = signal attenuation in the connecting cable between the transmitter and antenna in db Measuring Instruments See list of measuring instruments of this test report Test Procedures 1. The transmitter output port was connected to base station. 2. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. Set EUT at maximum power through base station. 4. Select lowest, middle, and highest channels for each band and different modulation. 5. Measure maximum average power for CDM Test Setup SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 17 of 51

18 3.3.5 Test Result of Conducted Output Power and ERP/EIRP Cellular Band (G T - L C = 0.58dB) Modes Test Status CDM xRTT RC1+SO55 Channel 1013 (Low) 384 (Mid) 777 (High) Frequency (MHz) Conducted Power P T (dbm) Conducted Power P T (Watts) ERP(dBm) ERP(Watts) PCS Band (G T - L C = 3.15dB) Modes Test Status CDM xRTT RC1+SO55 Channel 25 (Low) 600 (Mid) 1175 (High) Frequency (MHz) Conducted Power P T (dbm) Conducted Power P T (Watts) EIRP(dBm) EIRP(Watts) Note: EIRP = P T + G T L C, ERP = EIRP -2.15, where P T = transmitter output power in dbm G T = gain of the transmitting antenna in dbi L C = signal attenuation in the connecting cable between the transmitter and antenna in db SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 18 of 51

19 3.4 99% Occupied Bandwidth and 26dB Bandwidth Measurement Description of 99% Occupied Bandwidth and 26dB Bandwidth Measurement The 99% occupied bandwidth is the width of a frequency band such that, below the lower and above the upper frequency limits, the mean powers emitted are each equal to a specified percentage 0.5% of the total mean transmitted power. The emission bandwidth is defined as the width of the signal between two points, located at the 2 sides of the carrier frequency, outside of which all emissions are attenuated at least 26 db below the transmitter power Measuring Instruments See list of measuring instruments of this test report Test Procedures 1. The EUT was connected to Spectrum nalyzer and Base Station via power divider. 2. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. The 99% occupied bandwidth were measured, set RBW= 1% of span, VBW= 3*RBW, sample detector, trace maximum hold. 4. The 26dB bandwidth were measured, set RBW= 1% of EBW, VBW= 3*RBW, peak detector, trace maximum hold Test Setup SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 19 of 51

20 3.4.5 Test Result of Occupied Bandwidth and 26dB Bandwidth CDM2000 BC0 Test Mode Test Status CDM xRTT RC1+SO55 Channel 1013 (Low) 384 (Mid) 777 (High) Frequency (MHz) % OBW (MHz) dB BW (MHz) CDM2000 BC1 Test Mode Test Status CDM xRTT RC1+SO55 Channel 25 (Low) 600 (Mid) 1175 (High) Frequency (MHz) % OBW (MHz) dB BW (MHz) SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 20 of 51

21 3.4.6 Test Result (Plots) of Occupied Bandwidth and 26dB Bandwidth Band : CDM2000 BC0 Test Mode : 1xRTT_RC1+SO55 Link (QPSK) 99% Occupied Bandwidth Plot on Channel 1013 (824.7 MHz) Ref 30 dbm 30 Offset 14.8 db 20 1 S * T1 MXH 10 0 * RBW 30 khz * VBW 100 khz * tt 30 db * SWT 300 ms 1 Marker 1 [T1 ] dbm MHz OBW MHz Temp 1 [T1 OBW] 9.79 dbm MHz Temp 2 [T1 T2 OBW] 9.19 dbm MHz LVL Center MHz 200 khz/ Span 2 MHz Date: 10.JUL :41:23 26dB Bandwidth Plot on Channel 1013 (824.7 MHz) Ref 30 dbm * RBW 30 khz * VBW 100 khz * tt 30 db * SWT 300 ms Marker 1 [T1 ] dbm MHz 1 PK MXH Offset 14.8 db T1 1 ndb [T1] db BW MHz Temp 1 [T1 ndb] dbm MHz Temp 2 [T1 ndb] dbm LVL MHz T Center MHz 200 khz/ Span 2 MHz Date: 10.JUL :51:34 SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 21 of 51

22 99% Occupied Bandwidth Plot on Channel 384 ( MHz) Ref 30 dbm * RBW 30 khz * VBW 100 khz * tt 30 db * SWT 300 ms Marker 1 [T1 ] dbm MHz S * MXH 10 Offset 14.8 db T1 1 OBW MHz Temp 1 [T1 OBW] dbm MHz T2 Temp 2 [T1 OBW] dbm MHz LVL Center MHz 200 khz/ Span 2 MHz Date: 10.JUL :39:50 26dB Bandwidth Plot on Channel 384 ( MHz) Ref 30 dbm * RBW 30 khz * VBW 100 khz * tt 30 db * SWT 300 ms Marker 1 [T1 ] dbm MHz 30 Offset 14.8 db ndb [T1] db 1 PK MXH BW MHz Temp 1 [T1 ndb] dbm MHz Temp 2 [T1 ndb] dbm LVL MHz T1 T Center MHz 200 khz/ Span 2 MHz Date: 10.JUL :52:47 SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 22 of 51

23 99% Occupied Bandwidth Plot on Channel 777 ( MHz) Ref 30 dbm * RBW 30 khz * VBW 100 khz * tt 30 db * SWT 300 ms Marker 1 [T1 ] dbm MHz S * MXH 10 Offset 14.8 db T1 1 OBW MHz Temp 1 [T1 OBW] 9.70 dbm MHz Temp 2 [T1 OBW] T dbm MHz LVL Center MHz 200 khz/ Span 2 MHz Date: 10.JUL :40:29 26dB Bandwidth Plot on Channel 777 ( MHz) Ref 30 dbm * RBW 30 khz * VBW 100 khz * tt 30 db * SWT 300 ms Marker 1 [T1 ] dbm MHz 30 Offset 14.8 db ndb [T1] db 1 PK MXH T1 1 BW MHz Temp 1 [T1 ndb] dbm MHz Temp 2 [T1 ndb] dbm LVL MHz T Center MHz 200 khz/ Span 2 MHz Date: 10.JUL :52:12 SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 23 of 51

24 Band : CDM2000 BC1 Test Mode : 1xRTT_RC1+SO55 Link (QPSK) 99% Occupied Bandwidth Plot on Channel 25 ( MHz) Ref 30 dbm * RBW 30 khz * VBW 100 khz * tt 30 db * SWT 300 ms Marker 1 [T1 ] dbm GHz S * MXH 10 Offset 15.2 db T1 1 OBW MHz Temp 1 [T1 OBW] dbm GHz Temp 2 [T1 T2 OBW] 9.99 dbm GHz LVL Center GHz 200 khz/ Span 2 MHz Date: 10.JUL :38:22 26dB Bandwidth Plot on Channel 25 ( MHz) Ref 30 dbm * RBW 30 khz * VBW 100 khz * tt 30 db * SWT 300 ms Marker 1 [T1 ] dbm GHz 30 Offset 15.2 db ndb [T1] db 1 PK MXH T1 1 BW MHz Temp 1 [T1 ndb] dbm GHz Temp 2 [T1 ndb] dbm LVL GHz T Center GHz 200 khz/ Span 2 MHz Date: 11.JUL :24:09 SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 24 of 51

25 99% Occupied Bandwidth Plot on Channel 600 ( MHz) Ref 30 dbm 30 Offset 15.2 db 20 1 S * MXH T * RBW 30 khz * VBW 100 khz * tt 30 db * SWT 300 ms Marker 1 [T1 ] dbm GHz OBW MHz Temp 1 [T1 OBW] dbm GHz T2 Temp 2 [T1 OBW] dbm GHz LVL Center 1.88 GHz 200 khz/ Span 2 MHz Date: 10.JUL :39:31 26dB Bandwidth Plot on Channel 600 ( MHz) Ref 30 dbm * RBW 30 khz * VBW 100 khz * tt 30 db * SWT 300 ms Marker 1 [T1 ] dbm GHz 1 PK MXH Offset 15.2 db 1 ndb [T1] db BW MHz Temp 1 [T1 ndb] dbm GHz Temp 2 [T1 ndb] dbm LVL GHz T1 T Center 1.88 GHz 200 khz/ Span 2 MHz Date: 11.JUL :23:15 SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 25 of 51

26 99% Occupied Bandwidth Plot on Channel 1175 ( MHz) Ref 30 dbm * RBW 30 khz * VBW 100 khz * tt 30 db * SWT 300 ms Marker 1 [T1 ] dbm GHz S * MXH 10 Offset 15.2 db T1 1 OBW MHz Temp 1 [T1 OBW] dbm GHz Temp 2 [T1 T2 OBW] 9.08 dbm GHz LVL Center GHz 200 khz/ Span 2 MHz Date: 10.JUL :40:12 26dB Bandwidth Plot on Channel 1175 ( MHz) Ref 30 dbm * RBW 30 khz * VBW 100 khz * tt 30 db * SWT 300 ms Marker 1 [T1 ] dbm GHz 30 Offset 15.2 db ndb [T1] db 1 PK MXH T1 1 BW MHz Temp 1 [T1 ndb] dbm GHz Temp 2 [T1 ndb] dbm LVL GHz T Center GHz 200 khz/ Span 2 MHz Date: 11.JUL :23:40 SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 26 of 51

27 3.5 Band Edge Measurement Description of Band Edge Measurement The power of any emission outside of the authorized operating frequency ranges must be lower than the transmitter power (P) by a factor of at least log (P) db Measuring Instruments See list of measuring instruments of this test report Test Procedures 1. The EUT was connected to Spectrum nalyzer and Base Station via power divider. 2. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. The band edges of low and high channels for the highest RF powers were measured. Setting RBW as roughly BW/ The RBW was replaced by 10 khz, slightly smaller than the value in (3), due to the spectrum analyzer limitation to set the exact value. worst case correction factor of 10*log (1% emission-bw/measurement RBW) was compensated. 5. The RF fundamental frequency should be excluded against the limit line in the operating frequency band. 6. The limit line is derived from log(P) db below the transmitter power P(Watts) = P(W) - [ log(P) ] (db) = [ log(P)] (dbm) - [ log(P) ] (db) = -13dBm. SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 27 of 51

28 3.5.4 Test Setup SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 28 of 51

29 3.5.5 Test Result (Plots) of Conducted Band Edge Band : CDM2000 BC0 Test Mode : 1xRTT_RC1+SO55 Link (QPSK) Correction Factor : 1.56dB Maximum 26dB Bandwidth : 1.432MHz Band Edge : dBm Measurement Value : dBm Lower Band Edge Plot on Channel 1013 (824.7 MHz) Ref 30 dbm * RBW 10 khz * VBW 30 khz * tt 30 db * SWT 300 ms Marker 1 [T1 ] dbm MHz 30 Offset 14.8 db 20 1 V * VIEW 10 LVL D1-13 dbm Center 824 MHz 200 khz/ Span 2 MHz Date: 10.JUL :44:09 1. Correction Factor(dB)= 10log(1% Emission BW/RBW) 2. Band Edge= Measurement Value + Correction Factor(dB) SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 29 of 51

30 Band : CDM2000 BC0 Test Mode : 1xRTT_RC1+SO55 Link (QPSK) Correction Factor : 1.56dB Maximum 26dB Bandwidth: 1.432MHz Band Edge : dBm Measurement Value : dBm Higher Band Edge Plot on Channel 777 ( MHz) Ref 30 dbm * RBW 10 khz * VBW 30 khz * tt 30 db * SWT 300 ms Marker 1 [T1 ] dbm MHz 30 Offset 14.8 db 20 1 V * VIEW 10 LVL 0-10 D1-13 dbm Center 849 MHz 200 khz/ Span 2 MHz Date: 10.JUL :42:22 1. Correction Factor(dB)= 10log(1% Emission BW/RBW) 2. Band Edge= Measurement Value + Correction Factor(dB) SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 30 of 51

31 Band : CDM2000 BC1 Test Mode : 1xRTT_RC1+SO55 Link (QPSK) Correction Factor : 1.56dB Maximum 26dB Bandwidth: 1.432MHz Band Edge : dBm Measurement Value : dBm Lower Band Edge Plot on Channel 25 ( MHz) Ref 30 dbm * RBW 10 khz * VBW 30 khz * tt 30 db * SWT 300 ms Marker 1 [T1 ] dbm GHz 30 Offset 15.2 db 20 1 V * VIEW 10 LVL 0-10 D1-13 dbm Center 1.85 GHz 200 khz/ Span 2 MHz Date: 10.JUL :29:03 1. Correction Factor(dB)= 10log(1% Emission BW/RBW) 2. Band Edge= Measurement Value + Correction Factor(dB) SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 31 of 51

32 Band : CDM2000 BC1 Test Mode : 1xRTT_RC1+SO55 Link (QPSK) Correction Factor : 1.56dB Maximum 26dB Bandwidth: 1.432MHz Band Edge : dBm Measurement Value : dBm Higher Band Edge Plot on Channel 1175 ( MHz) Ref 30 dbm * RBW 10 khz * VBW 30 khz * tt 30 db * SWT 300 ms Marker 1 [T1 ] dbm GHz 30 Offset 15.2 db 20 1 V * VIEW 10 LVL 0-10 D1-13 dbm Center 1.91 GHz 200 khz/ Span 2 MHz Date: 10.JUL :29:46 1. Correction Factor(dB)= 10log(1% Emission BW/RBW) 2. Band Edge= Measurement Value + Correction Factor(dB) SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 32 of 51

33 3.6 Conducted Spurious Emission Measurement Description of Conducted Emission Measurement The power of any emission outside of the authorized operating frequency ranges must be lower than the transmitter power (P) by a factor of at least log (P) db. It is measured by means of a calibrated spectrum analyzer and scanned from 30 MHz up to a frequency including its 10 th harmonic Measuring Instruments See list of measuring instruments of this test report Test Procedures 1. The EUT was connected to spectrum analyzer and base station via power divider. 2. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. The middle channel for the highest RF power within the transmitting frequency was measured. 4. The conducted spurious emission for the whole frequency range was taken. 5. The RF fundamental frequency should be excluded against the limit line in the operating frequency band. 6. The limit line is derived from log(P) db below the transmitter power P(Watts) = P(W) - [ log(P) ] (db) = [ log(P)] (dbm) - [ log(P) ] (db) = -13dBm. SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 33 of 51

34 3.6.4 Test Setup SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 34 of 51

35 3.6.5 Test Result (Plots) of Conducted Spurious Emission Band : CDM2000 BC0 Channel 384 Test Mode : 1xRTT_RC1+SO55 Link (QPSK) Frequency : MHz Conducted Spurious Emission Plot between 30MHz ~ 1GHz Ref 40 dbm * RBW 1 MHz * VBW 3 MHz * tt 40 db * SWT 500 ms Marker 1 [T1 ] dbm MHz 40 Offset 14.9 db 30 1 PK VIEW 20 LVL D1-13 dbm Start 30 MHz 97 MHz/ Stop 1 GHz Date: 10.JUL :59:46 Conducted Spurious Emission Plot between 1GHz ~ 3GHz Ref 0 dbm * RBW 1 MHz * VBW 3 MHz * tt 0 db * SWT 500 ms Marker 2 [T1 ] dbm GHz 1 PK VIEW 0 Offset 15.4 db -10 D1-13 dbm -20 Marker 1 [T1 ] dbm GHz LVL Start 1 GHz 200 MHz/ Stop 3 GHz Date: 10.JUL :09:54 SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 35 of 51

36 Conducted Spurious Emission Plot between 3GHz ~ 7GHz Ref 0 dbm 0 Offset 16.7 db * RBW 1 MHz * VBW 3 MHz * tt 0 db * SWT 500 ms Marker 1 [T1 ] dbm GHz 1 PK VIEW D1-13 dbm LVL Start 3 GHz 400 MHz/ Stop 7 GHz Date: 10.JUL :10:26 Conducted Spurious Emission Plot between 7GHz ~ 9GHz Ref 0 dbm 0 Offset 17.1 db * RBW 1 MHz * VBW 3 MHz * tt 0 db * SWT 500 ms Marker 1 [T1 ] dbm GHz 1 PK VIEW D1-13 dbm LVL Start 7 GHz 200 MHz/ Stop 9 GHz Date: 10.JUL :11:38 SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 36 of 51

37 Band : CDM2000 BC1 Channel 600 Test Mode : 1xRTT_RC1+SO55 Link (QPSK) Frequency : MHz Conducted Spurious Emission Plot between 30MHz ~ 1GHz Ref 30 dbm * RBW 1 MHz * VBW 3 MHz * tt 30 db * SWT 500 ms Marker 1 [T1 ] dbm MHz 30 Offset 14.9 db 20 1 PK VIEW 10 LVL 0-10 D1-13 dbm Start 30 MHz 97 MHz/ Stop 1 GHz Date: 11.JUL :09:28 Conducted Spurious Emission Plot between 1GHz ~ 3GHz Ref 40 dbm * RBW 1 MHz * VBW 3 MHz * tt 40 db * SWT 500 ms Marker 1 [T1 ] dbm GHz 40 Offset 15.4 db 30 1 PK VIEW 20 LVL D1-13 dbm Start 1 GHz 200 MHz/ Stop 3 GHz Date: 11.JUL :09:56 SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 37 of 51

38 Conducted Spurious Emission Plot between 3GHz ~ 7GHz Ref 0 dbm * RBW 1 MHz * VBW 3 MHz * tt 0 db * SWT 500 ms Marker 1 [T1 ] dbm GHz 0 Offset 16.7 db 1 PK -10 D1-13 dbm VIEW -20 LVL Start 3 GHz 400 MHz/ Stop 7 GHz Date: 11.JUL :10:24 Conducted Spurious Emission Plot between 7GHz ~ 13.6GHz Ref 0 dbm * RBW 1 MHz * VBW 3 MHz * tt 0 db * SWT 500 ms Marker 1 [T1 ] dbm GHz 0 Offset 19.1 db 1 PK -10 D1-13 dbm VIEW -20 LVL Start 7 GHz 660 MHz/ Stop 13.6 GHz Date: 11.JUL :11:05 SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 38 of 51

39 Conducted Spurious Emission Plot between 13.6GHz ~ 19.1GHz Ref 0 dbm * RBW 1 MHz * VBW 3 MHz * tt 0 db * SWT 500 ms Marker 1 [T1 ] dbm GHz 0 Offset 20.1 db 1 PK -10 D1-13 dbm VIEW -20 LVL Start 13.6 GHz 550 MHz/ Stop 19.1 GHz Date: 11.JUL :11:42 SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 39 of 51

40 3.7 Field Strength of Spurious Radiation Measurement Description of Field Strength of Spurious Radiated Measurement The power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitter power (P) by a factor of at least 43+10log 10 (P[Watts]) db. The spectrum is scanned from 30 MHz up to a frequency including its 10th harmonic Measuring Instruments See list of measuring instruments of this test report Test Procedures 1. The EUT was placed on a rotatable wooden table with 0.8 meter above ground. 2. The EUT was set 3 meters from the receiving antenna, which was mounted on the antenna tower. 3. The table was rotated 360 degrees to determine the position of the highest spurious emission. 4. The height of the receiving antenna is varied between one meter and four meters to search the maximum spurious emission for both horizontal and vertical polarizations. 5. Make the measurement with the spectrum analyzer's RBW = 1MHz, VBW = 3MHz, taking the record of maximum spurious emission. 6. horn antenna was substituted in place of the EUT and was driven by a signal generator. 7. Tune the output power of signal generator to the same emission level with EUT maximum spurious emission. 8. Taking the record of output power at antenna port. 9. Repeat step 7 to step 8 for another polarization. 10. EIRP (dbm) = S.G. Power Tx Cable Loss + Tx ntenna Gain 11. ERP (dbm) = EIRP The RF fundamental frequency should be excluded against the limit line in the operating frequency band. 13. The limit line is derived from log(P) db below the transmitter power P(Watts) = P(W) - [ log(P) ] (db) = [ log(P)] (dbm) - [ log(P) ] (db) = -13dBm. SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 40 of 51

41 3.7.4 Test Setup For radiated emissions from 30MHz to 1GHz For radiated emissions above 1GHz SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 41 of 51

42 3.7.5 Test Result of Field Strength of Spurious Radiated Band : CDM2000 BC0 Temperature : 23~24 C Test Mode : 1xRTT_RC1+SO55 Link (QPSK) Relative Humidity : 43~44% Test Engineer : Stone Gu Polarization : Horizontal Remark : Spurious emissions within MHz were found more than 20dB below limit line. Frequency ERP Limit Over SP S.G. TX Cable TX ntenna Polarization Result Limit Reading Power loss Gain ( MHz ) ( dbm ) ( dbm ) ( db ) (dbm) ( dbm ) ( db ) (dbi) (H/V) H Pass H Pass H Pass SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 42 of 51

43 Band : CDM2000 BC0 Temperature : 23~24 C Test Mode : 1xRTT_RC1+SO55 Link (QPSK) Relative Humidity : 43~44% Test Engineer : Stone Gu Polarization : Vertical Remark : Spurious emissions within MHz were found more than 20dB below limit line. Frequency ERP Limit Over SP S.G. TX Cable TX ntenna Polarization Result Limit Reading Power loss Gain ( MHz ) ( dbm ) ( dbm ) ( db ) (dbm) ( dbm ) ( db ) (dbi) (H/V) V Pass V Pass V Pass SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 43 of 51

44 Band : CDM2000 BC1 Temperature : 23~24 C Test Mode : 1xRTT_RC1+SO55 Link (QPSK) Relative Humidity : 43~44% Test Engineer : Stone Gu Polarization : Horizontal Remark : Spurious emissions within MHz were found more than 20dB below limit line. Frequency EIRP Limit Over SP S.G. TX Cable TX ntenna Polarization Result Limit Reading Power loss Gain ( MHz ) ( dbm ) ( dbm ) ( db ) (dbm) ( dbm ) ( db ) (dbi) (H/V) H Pass H Pass H Pass SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 44 of 51

45 Band : CDM2000 BC1 Temperature : 23~24 C Test Mode : 1xRTT_RC1+SO55 Link (QPSK) Relative Humidity : 43~44% Test Engineer : Stone Gu Polarization : Vertical Remark : Spurious emissions within MHz were found more than 20dB below limit line. Frequency EIRP Limit Over SP S.G. TX Cable TX ntenna Polarization Result Limit Reading Power loss Gain ( MHz ) ( dbm ) ( dbm ) ( db ) (dbm) ( dbm ) ( db ) (dbi) (H/V) V Pass V Pass V Pass SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 45 of 51

46 3.8 Frequency Stability Measurement Description of Frequency Stability Measurement The frequency stability shall be measured by variation of ambient temperature and variation of primary supply voltage to ensure that the fundamental emission stays within the authorized frequency block. The frequency stability of the transmitter shall be maintained within ± % (±2.5ppm) of the center frequency Measuring Instruments See list of measuring instruments of this test report Test Procedures for Temperature Variation 1. The EUT was set up in the thermal chamber and connected with the base station. 2. With power OFF, the temperature was decreased to -30 C and the EUT was stabilized before testing. Power was applied and the maximum change in frequency was recorded within one minute. 3. With power OFF, the temperature was raised in 10 C step up to 50 C. The EUT was stabilized at each step for at least half an hour. Power was applied and the maximum frequency change was recorded within one minute. 4. If the EUT cannot be turned on at -30 C, the testing lowest temperature will be raised in 10 C step until the EUT can be turned on Test Procedures for Voltage Variation 1. The EUT was placed in a temperature chamber at 25±5 C and connected with the base station. 2. The power supply voltage to the EUT was varied from BEP to 115% of the nominal value measured at the input to the EUT. 3. The variation in frequency was measured for the worst case. SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 46 of 51

47 3.8.5 Test Setup SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 47 of 51

48 3.8.6 Test Result of Temperature Variation Band : CDM2000 BC0 1xRTT_RC1+SO55 Channel : 384 Limit (ppm) : 2.5 Frequency : MHz Temperature ( C) Freq. Dev. (Hz) Deviation (ppm) Result PSS Note: The manufacturer declared that the EUT could work properly at temperature 55 C. Band : CDM2000 BC1 1xRTT_RC1+SO55 Channel : 600 Limit (ppm) : 2.5 Frequency : MHz Temperature ( C) Freq. Dev. (Hz) Deviation (ppm) Result PSS Note: The manufacturer declared that the EUT could work properly at temperature 55 C. SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 48 of 51

49 3.8.7 Test Result of Voltage Variation Band & Channel Mode Voltage (Volt) Freq. Dev. (Hz) Deviation (ppm) Limit (ppm) Result CDM2000 BC0 CH384 1xRTT RC1+SO55 BEP PSS CDM2000 BC1 CH600 1xRTT RC1+SO55 BEP PSS Note : 1. Normal Voltage = 3.8V. 2. Battery End Point (BEP) = 3.6 V. SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 49 of 51

50 4 List of Measuring Equipment Instrument Manufacturer Model No. Serial No. Characteristics Calibration Date Test Date Due Date Remark Spectrum nalyzer Jul. 10, 2013~ R&S FSP kHz~40GHz Dec. 29, 2012 Dec. 28, 2013 Conducted Jul. 11, 2013 (TH01-KS) Jul. 10, 2013~ Power Meter gilent E4416 MY N/ ug. 22, 2012 ug. 21, 2013 Conducted Jul. 11, 2013 (TH01-KS) Jul. 10, 2013~ Power Sensor gilent E9327 MY N/ ug. 22, 2012 ug. 21, 2013 Conducted Jul. 11, 2013 (TH01-KS) Thermal Jul. 10, 2013~ Ten Billion TTC-B3S TBN N/ Dec. 29, 2012 Dec. 28, 2013 Conducted Chamber Jul. 11, 2013 (TH01-KS) EMI Test Radiation R&S ESCI kHz~3GHz Nov. 08, 2012 Jul. 11, 2013 Nov. 07, 2013 Receiver (03CH01-KS) Spectrum Radiation R&S FSP kHz~30GHz May 23, 2013 Jul. 11, 2013 May 22, 2014 nalyzer (03CH01-KS) Radiation Bilog ntenna SCHFFNER CBL6112D MHz~2GHz Dec. 07, 2012 Jul. 11, 2013 Dec. 06, 2013 (03CH01-KS) Double Ridge Horn ntenna EMCO GHz~18GHz Dec. 07, 2012 Jul. 11, 2013 Dec. 06, 2013 Radiation (03CH01-KS) Radiation mplifier com-power P MHz~1GHz May 23, 2013 Jul. 11, 2013 May 22, 2014 (03CH01-KS) Radiation mplifier gilent 8449B GHz~26.5GHz Dec. 29, 2012 Jul. 11, 2013 Dec. 28, 2013 (03CH01-KS) ctive Horn Radiation com-power H GHz~18GHz Nov. 07, 2012 Jul. 11, 2013 Nov. 06, 2013 ntenna (03CH01-KS) Radiation SHF-EHF Horn Schwarzbeck BBH 9170 BBH GHz~40GHz Nov. 23, 2012 Jul. 11, 2013 Nov. 22, 2013 (03CH01-KS) Turn Table MF MF7802 N/ 0 ~ 360 degree N/ Jul. 11, 2013 N/ Radiation (03CH01-KS) ntenna Mast MF MF7802 N/ 1 m - 4 m N/ Jul. 11, 2013 N/ Radiation (03CH01-KS) SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 50 of 51

51 5 Uncertainty of Evaluation Uncertainty of Radiated Emission Measurement (30 MHz ~ 1000 MHz) Measuring Uncertainty for a Level of Confidence of 95% (U = 2Uc(y)) 2.54 Uncertainty of Radiated Emission Measurement (1 GHz ~ 40 GHz) Measuring Uncertainty for a Level of Confidence of 95%(U = 2Uc(y)) 4.72 SPORTON INTERNTIONL (KUNSHN) INC. Page Number : 51 of 51