MaxGard Interconnection Systems

Transcription

1 Maxard Interconnection Systems Russellstoll Line Selections for Outdoor (and Indoor) Applications Maxard 4P5W + Opt. 30 through 400A The widest range and toughest construction. Safety, durability and performance by design in copperfree, cast aluminum, epoxy powdercoated housings. Built to last, from 30- through 400-amp application, with a full interlock line, too. Optional -control contacts and more than 00 individual voltage polarization options through 600VAC/50VDC, 4P5W. O-ringed sealed pins, sleeves and interiors. Usage Any application where electrical connections need protection from water and/or dust ingress to contacts or wiring compartment Cable-to-connector sealing and watertight device locking designs are critical Metal connectors are usually preferred for long service life Typical Application roups Marine Lighting Systems Shore-to-Ship Power Welding Stations Power Distribution Centers Shipboard Power Outlets Barge Power Connection Construction and Agricultural enerator Sets and Systems Portable Tools and Equipment Irrigation Systems Panels Portable Lighting and Equipment overnment Municipal and Utilities Portable Building Power Army Corps of Engineers Utilities Panels Emergency Power Systems Sewage Pumping Stations Light and Controls Telephone Vault Systems Cellular Telephone Masts OEMs enset and Welding Systems Transportable Equipment Screw Cap = EMA 4X Flip Lid = EMA 3R H-96

2 Maxard Interconnection Systems Benefits 30A 400A (30 00A Load Breaking), Maximum 600VAC/50VDC Receptacles, Inlets, Plugs, Connectors, Interlocked Receptacles, Explosion-Proof Interlocked Receptacles Russellstoll builds a variety of benefits into one plug, receptacle and interlock system for your application. The Maxard system: Maximum Safety, Durability and Performance in electrical interconnections. Safety Waterproof construction: Standard eoprene O-ringed interior components provide environ mental separation at the front of each device; they are watertight even when not mated (or engaged) Different power supply ratings can t mix: 4 single-rate device polarizations ensure exact voltage, frequency and phase differentiation plus a few specials, too. Available in every current range Plugs stay in: Standard delayed action pull and turn withdrawal offers all plugs an XP rating (30 00 amps). All system components use mating screw collars Foreign objects stay out: All receptacles and connectors have a gated rotating disk on the face of the interior, which engages upon insertion Durability At last durability: Rugged cast aluminum housings with two layers of electrostatic epoxy coating are standard, along with stainless steel hardware. Available with flap or screw covers. Interiors are molded from a tough reinforced UL94-V0 thermoset polyester The best connections for life: Pins and sleeves are made from CDA 360 and Marine-grade CDA 485 brass; 00- and 400-amp lines are silver-plated as well The most power available in the most pack ages : 30-, 60-, 00-, 00- and 400-amp lines in one system with cast aluminum EMA 4X interlocks; steel 30-, 60- and 00-amp EMA interlocks or cast aluminum XP interlocks in 30-, 60- and 00-amp ranges Performance Any configuration you need: Through 4-pole 5-wire configurations, all have a safety center earth ground pin design that makes first and breaks last. This feature applies to all of our plugs, connectors, receptacles, male inlets and interlock systems More control available: Two optional pilot/control pins for contactors, load monitor circuits, shunt trip or any other communication functions you need Ease of assembly: Solderless pressure-type screw terminals with hex socket heads and rear-access, take-apart housings provide quick wiring access. o interior removal required for wiring receptacles and connectors More power: 50% non-ul ratings allow extending Maxard installations to 600-amp custom loads, with separate disconnect service H-97

3 Maxard Interconnection Systems 30A 400A (30 00A Load Breaking), Maximum 600VAC/50VDC Receptacles, Inlets, Plugs, Connectors, Interlocked Receptacles, Explosion-Proof Interlocked Receptacles Plug and Receptacle with Angle Adapter and Junction Box Electrostatic epoxy powder coat finish for maximum corrosion resistance CDA 485 Marine-grade brass pins and sleeves eoprene O-rings on pins, sleeves and interiors provide environmental separation and true waterproof integrity Extra thick-wall back boxes 300 series stainless steel hardware for corrosion resistance (entire line) Copper-free cast aluminum housings Optional pilot contacts available for control or electrical interlocking Extra-long current contacts with deep-well arc containment Acme threads prevent freezing of screw collars and covers ated deadfront construction Padlock-out access hole in plug shroud provided as standard safety feature Delayed insertion/removal keyways provide XP approval for standard 30-, 60- and 00-amp plugs. Compression-type gland bushing for optimal cable seal Center round Contacts: Make First, Break Last Optional Control/Pilot Contacts: Make Last, Break First Hex-type pressure terminals to ensure tighter connections Available up to 4P5W + pilot; Circuit Interrupting/Load Breaking 30 to 00 amps. H-98

4 Maxard Interconnection Systems 30A 400A (30 00A Load Breaking), Maximum 600VAC/50VDC Receptacles, Inlets, Plugs, Connectors, Interlocked Receptacles, Explosion-Proof Interlocked Receptacles Cast Aluminum Circuit Breaker Interlocked Receptacle (Cutaway View) Thick-wall cast copper-free aluminum housing with epoxy powder coat finish EMA 4X interlocks avail able in amp ranges through 4P5W, with optional pilot/ control contacts. Heavy On/Off handle adds mechanical-toelectrical interlock function Standard conduit openings through top or side (cutaway shown), optional sizes and locations Standard, high A/C or A breaker switch (cutaway shown) Options include: Shunt Trip Auxiliary Switch Trip Ratings (External lockout option kit available) ated, rotating deadfront receptacle Watertight = Screw cap cover Splashproof = Flap cover Heavy-duty sliding bar interlock mechanism (mates with plug padlock-out access hole) Protective screw cap (flap cap also available) H-99

5 Maxard Interconnection Systems 30A 400A (30 00A Load Breaking), Maximum 600VAC/50VDC Receptacles, Inlets, Plugs, Connectors, Interlocked Receptacles, Explosion-Proof Interlocked Receptacles Fused-Disconnect Switch* Interlocked Receptacle Available in 30-, 60- and 00-amp sizes, all polarizations through 600VAC. Standard 600V cartridge fuse clips and spacing Safety fuse pulls Backup door safety latch Door safety switch Clear shield for test probes Three external lockout points Heavy.060 steel galvaneel with baked enamel, EMA 3R/ construction Consult Technical Services for additional options Fully interlocked Maxard receptacle Meets Federal specification WS865C, UL File #E539 Meets UL 98, 50, 68, 508, 3 Meets EC Table 373-6(b) Meets major automotive specs * Also available as switch only Angled front receptacle for easier access H-300

6 Maxard Interconnection Systems 30A 400A (30 00A Load Breaking), Maximum 600VAC/50VDC Receptacles, Inlets, Plugs, Connectors, Interlocked Receptacles, Explosion-Proof Interlocked Receptacles Explosion-Proof Waterproof Circuit Breaker Interlocked Receptacle Available in 30-, 60- and 00-amp sizes, all polarizations. Heavy-duty XP cast aluminum housing, electrostatic epoxy coat finish UL and CSA listed for hazardous locations Class I, Division, roups B, C and D Class II, Division, roups F and UL File E099 EMA 7, 8, 9 CSA DOT shipboard used above deck green water EMA 4X USC approved Standard, high AIC and A (switched only) breakers available Maxard DBRE and DSRE series interlocks are explosion proof and waterproof (O-ring sealed), along with optional control contacts, and are fully UL Listed. Explosion-Proof Waterproof on-interlocked Receptacle Threaded access (cover not shown) with O-ring for XP and waterproof integrity Drain plug Factory-sealed receptacle interior accepts standard XP-rated Maxard plugs ated deadfront safety Threaded access (cover not shown) with O-ring for XP and waterproof integrity Factory-sealed interior (no filled conduits) Easy low-cost installation ated deadfront for safety Heavy-duty XP cast aluminum housing, electrostatic epoxy coat finish UL and CSA Listed for hazardous locations Class I, Division, C and D Class II, Division, roups F and UL File E099 EMA 7, 8, 9 CSA DOT shipboard used above deck green water EMA 4X USC approved All standard polarizations available to 480VAC Factory-sealed receptacle interior accepts standard XP-rated Maxard plugs H-30

7 Maxard Interconnection Systems Receptacles, Plugs and Connectors Feature Russellstoll Maxard Crouse-Hinds Arktite ** Appleton Powertite *** Center ground contact Yes o o 4 single-rated factory polarizations Yes o o ated deadfront construction Yes o o Two optional control contacts Yes o o Marine-grade CDA485 brass pins/sleeves Yes o o ( amp silver-plated) O-rings/environmental separation, full line Yes o o Available to 5-wire (4-pole, 5-wire) Yes 30 and 60 amp only o Complete line epoxy powder coated standard Yes o Some Interlocked XP Receptacles Feature 30A 400A Plugs, Connectors, Receptacles, Inlets and Interlocked Receptacles Russellstoll DBRE/DSRE Series Crouse-Hinds EPC Series Appleton EBR Series (with FB breaker) Waterproof (DurORing ) O-ring sealing Yes o o Available to 5-wire (4-pole, 5-wire) through 00 amp Yes o o ated deadfront Yes o o Center ground sleeve contact Yes o o 4 single-rated factory polarizations Yes o o Class I, Div., roups B, C, D Yes Yes Yes Class II, Div., roups F and Yes Yes Yes* Meets Coast uard (was C59) approvals Yes o o * roup F excepting electrically conductive dusts ** Crouse-Hinds and Arktite are trademarks of Cooper Industries, Inc. *** Appleton and Powertite are trademarks of Appleton Electric Inc. H-30

8 Maxard Interconnection Systems Receptacles, Plugs and Connectors D F 3 44 f r a b k D = ated Deadfront 30A 400A Plugs, Connectors, Receptacles, Inlets and Interlocked Receptacles M = Male Pins, F = Female Sleeves (contacts) Assignment umber See page H-340 (voltage selection chart) Amperage Rating 3 = 30A, 6 = 60A, = 00A, = 00A, 4 = 400A F = Flap Cover, S = Screw Cover (screw collar for male plugs and male inlets) Interlocks (Standard or Explosion-Proof) Ø = Standard Configuration, K = Control Contacts B = Junction Box, E = Angle Enclosure, Ø = o Box Ø = Without Adapter, A = Angle, S = Straight Adapter R = Receptacle, P = Plug } Ex: FP = Connector MR = Motor Inlet d s r e k s (Last 3 positions above: Ø can appear in any position standard plugs, etc. will have a ØØØ suffix, e.g., DS404MPØØØ ) Ø = Standard Configuration, S = Auxiliary Switch, Z = Shunt Trip Ø = Standard Configuration, K = Control Contacts Breaker Rating code: (page H-330 Breaker Rating Trip Charts) *AO = on-automatic Switch Assignment umber (page H-340 Selection Chart) Amperage Rating 3 = 30A, 6 = 60A, = 00A, = 00A, 4 = 400A E = Explosion-Proof, F = Flap Cap (weathertight), S = Screw Cap (watertight) R = Receptacle * With S in position, positions 9, 0 and must be AO * S = Switch, B = Circuit Breaker D = ated Deadfront H-303

9 Maxard Interconnection Systems 30 Amp Standard Service ** If receptacle is desired with a Straight Adapter instead of standard Angle Adapter, substitute S for the A in the catalog number of the Receptacle with Angle Adapter or Adapter and Box. Standard cable bushings shown; see page H-334 for other sizes available at no extra cost if specified on order. Always furnished with screw collar. We recommend cup cap with male plug; order catalog number DS3CC. Maximum lug wire 8 AW 7-strand or flexible, cable entrance.87" diameter. Receptacles furnished with flap cap also have screw thread to accept male collar on plug. Catalog numbers shown are for flap cap receptacles; change DF to DS for ordering screw cap. Boldface figures are for voltage assignment. For different ratings, see page H-340. Outlet furnished at location B unless otherwise B specified. " PT. t Control contacts for plug/receptacles: Use K where noted. Ex: DS304MP00K For Adapters, Junction Boxes and Accessories, see pages H-334 H-337. Device Ratings and Polarizations Maximum 600VAC or 50VDC (For full polarization, see page H-340) A D C Male Plug 4 3 4" 7 7 8" Female Connector 5 8" 8 3 4" Pole Wire Conductor Placement 60 hz CAT. O. t Standard Bushing I.D. CAT. O. t Standard Bushing I.D. 77 DS304MPØØØ 7 DF304FPØØØ 8" 5 DS307MPØØØ DF307FPØØØ 7 8" 480 DS304MPØØØ DF304FPØØØ 50 DS307MPØØØ 7 DF307FPØØØ 8" 600 DS34MPØØØ DF34FPØØØ 7 8" 08 DS36MPØØØ DF36FPØØØ 77/480 DS3304MPØØØ DF3304FPØØØ 3 4 5/50 DS3307MPØØØ " DF3307FPØØØ " 0/08 DS336MPØØØ DF336FPØØØ 3Ø 480 DS3404MPØØØ DF3404FPØØØ 3Ø 50 DS3407MPØØØ DF3407FPØØØ 3 4 3Ø 600 DS344MPØØØ " DF344FPØØØ " 3Ø 08 DS346MPØØØ DF346FPØØØ 3Ø 440 DS34MPØØØ DF34FPØØØ 3ØY 77/480 DS3504MPØØØ DF3504FPØØØ 4 5 3ØY 347/600 DS354MPØØØ DF354FPØØØ 3 6" 3ØY 0/08 DS356MPØØØ DF356FPØØØ 3ØY 50/440 DS35MPØØØ DF35FPØØØ 3 6" H-304

10 Maxard Interconnection Systems Female Receptacle with Angle Enclosure 9 7 8" 3 8" 6 3 8" 9 5 8" Female Receptacle with Angle Adapter** and Junction Box 3" Female Receptacle with Angle Adapter** 9 8" 6 8" 7 8" 9 5 8" Female Receptacle 4 " CAT. O. CAT. O. CAT. O. CAT. O. t t t t DF304FRØEØdF304FRABØ DF304FRAØØ DF304FRØØØ DF307FRØEØ DF307FRABØ DF307FRAØØ DF307FRØØØ DF304FRØEØ DF304FRABØ DF304FRAØØ DF304FRØØØ DF307FRØEØ DF307FRABØ DF307FRAØØ DF307FRØØØ DF34FRØEØ DF34FRABØ DF34FRAØØ DF34FRØØØ DF36FRØEØ DF36FRABØ DF36FRAØØ DF36FRØØØ DF3304FRØEØ DF3304FRABØ DF3304FRAØØ DF3304FRØØØ DF3307FRØEØ DF3307FRABØ DF3307FRAØØ DF3307FRØØØ DF336FRØEØ DF336FRABØ DF336FRAØØ DF336FRØØØ DF3404FRØEØ DF3404FRABØ DF3404FRAØØ DF3404FRØØØ DF3407FRØEØ DF3407FRABØ DF3407FRAØØ DF3407FRØØØ DF344FRØEØ DF344FRABØ DF344FRAØØ DF344FRØØØ DF346FRØEØ DF346FRABØ DF346FRAØØ DF346FRØØØ DF34FRØEØ DF34MRABØ DF34FRAØØ DF34FRØØØ DF3504FRØEØ DF3504FRABØ DF3504FRAØØ DF3504FRØØØ DF354FRØEØ DF354FRABØ DF354FRAØØ DF354FRØØØ DF356FRØEØ DF356FRABØ DF356FRAØØ DF356FRØØØ DF35FRØEØ DF35FRABØ DF35FRAØØ DF35FRØØØ H-305

11 Maxard Interconnection Systems 30 Amp * otes to Catalog umbers Control Contacts (position ) use K example: DBRF304030K0 Shunt Trip Breaker (position 3) add Z to above: DBRF304030KZ Breaker Trip Ratings (positions 9, 0, ) 5 amp use 05 5 amp use 05 0 amp use amp use 030 on-auto Sw. AO (repl. DBRF with DSRF ) Conduit Hubs: EMA 4X Conduit Hubs: XP Std. " PT-thread Std. " -thread outlets outlet at B (or E) provided at A, B or C 30 amp Max. "/64mm 30 amp.5"/3mm E B - std. tcontrol contacts K designation. B - std. on-fused version available. Replace DFRF with DRF. Boldface figures are for voltage assignment. For different ratings, see page H-340. Device Ratings and Polarizations Maximum 600VAC or 50VDC (For full polarization, see page H-340) A C Interlocked Receptacle with Circuit Breaker EMA 4X 3 8" 6 4" 5 8" 3 8" " 8 3 4" 6 " Explosion-Proof Interlocked Receptacle Class I, Class II 8 3 4" 7 " " 4 3 4" 0" Pole Wire Conductor Placement 60 hz CAT. O. CAT. O. * * 77 DBRF304Ø3ØØØ DBRE304Ø3ØØØ 5 DBRF307Ø3ØØØ DBRE307Ø3ØØØ 480 DBRF304Ø3ØØØ DBRE304Ø3ØØØ 50 DBRF307Ø3ØØØ DBRE307Ø3ØØØ 600 DBRF34Ø3ØØØ DBRE34Ø3ØØØ 08 DBRF36Ø3ØØØ DBRE36Ø3ØØØ 77/480 DBRF3304Ø3ØØØ DBRE3304Ø3ØØØ 3 4 5/50 DBRF3307Ø3ØØØ DBRE3307Ø3ØØØ 0/08 DBRF336Ø3ØØØ DBRE336Ø3ØØØ 3Ø 480 DBRF3404Ø3ØØØ DBRE3404Ø3ØØØ 3Ø 50 DBRF3407Ø3ØØØ DBRE3407Ø3ØØØ 3 4 3Ø 600 DBRF344Ø3ØØØ DBRE344Ø3ØØØ 3Ø 08 DBRF346Ø3ØØØ DBRE346Ø3ØØØ 3Ø 440 DBRF34Ø3ØØØ DBRE34Ø3ØØØ 3ØY 77/480 DBRF3504Ø3ØØØ DBRE3504Ø3ØØØ 4 5 3ØY 347/600 DBRF354Ø3ØØØ DBRE354Ø3ØØØ 3ØY 0/08 DBRF356Ø3ØØØ DBRE356Ø3ØØØ 3ØY 50/440 DBRF35Ø3ØØØ DBRE35Ø3ØØØ H-306

12 Maxard Interconnection Systems Fasteners Screws ( places) Holes for Padlock ( places) Fused Disconnect Interlocked Receptacle EMA /3R 5 3 4" 5" 9 " 4" 6" 3 4" 30" Access Cover to Pigtails for Wiring Ø.8 4 PLS 4.00 Mtg. Explosion-Proof on-interlocked Receptacle 7.6" 7.03".35".50" 0.6" Conduit Location B Conduit Location A solution 30 Amp Application: Dulles International Airport People Mover. People Movers are used at Dulles for shuttling passengers from check-in to mid-field terminals to board their flight. These vehicles require air conditioning and heater unit power when docked at either location for maintenance and overhaul. 7 " Conduit Location C Conduit Location D Installation: CAT. O. t DFRF304Ø DFRF307Ø DFRF304Ø DFRF307Ø DFRF34Ø DFRF36Ø DFRF3304Ø DFRF3307Ø DFRF336Ø DFRF3404Ø DFRF3407Ø DFRF344Ø DFRF346Ø DFRF34Ø DFRF3504Ø DFRF354Ø DFRF356Ø DFRF35Ø CAT. O. t DSE304FRØ DSE307FRØ DSE304FRØ DSE307FRØ DSE34FRØ DSE36FRØ DSE3304FRØ DSE3307FRØ DSE336FRØ DSE3404FRØ DSE3407FRØ DSE344FRØ DSE346FRØ DSE34FRØ DSE3504FRØ DSE354FRØ DSE356FRØ DSE35FRØ Vehicle-mounted 30-amp male inlet with mating connector and two control contacts. Maxard receptacles, plugs and connectors were specified for their safety, construction and durability needed to withstand frequent reconnections. The single-rated factory polarization also ensured built-in protection against unsafe hookups. The control contacts offer monitoring capabilities for the vehicle while being overhauled. Deep insulating chambers confine and snuff out arcing when removing devices under load. Maintenance costs are minimal due to self-cleaning pin and sleeve contact design, rear-loaded interior wiring access and quick pressure-screw type wiring terminals. H-307

13 Maxard Interconnection Systems 30 Amp Reverse Service ** If receptacle is desired with a Straight Adapter instead of standard Angle Adapter, substitute S for the A in the catalog number of the Receptacle with Angle Adapter or Adapter and Box. Standard cable bushings shown; see page H-334 for other sizes available at no extra cost if specified on order. Always furnished with screw collar. We recommend cup cap with male plug; order catalog number DS3CC. Maximum lug wire 4 AW 7-strand or flexible, cable entrance.87" diameter. Receptacles furnished with flap cap also have screw thread to accept male collar on plug. Catalog numbers shown are for flap cap receptacles; change DF to DS for ordering screw cap. Boldface figures are for voltage assignment. For different ratings, see page H-340. Outlet furnished at location B unless otherwise specified. " PT. t Control contacts for plug/receptacles: Use K where noted. Ex: DS304MR00K For Adapters, Junction Boxes and Accessories, see pages H-334 H-337. Device Ratings and Polarizations Maximum 600VAC or 50VDC (For full polarization, see page H-340) A B D C Female Connector 5 8" 8 3 4" Male Plug 4 3 4" 7 8" Pole Wire Conductor Placement 60 hz CAT. O. Standard Bushing I.D. CAT. O. t 77 DF304FPØØØ 7 DS304MPØØØ 8" 5 DF307FPØØØ DS307MPØØØ 480 DF304FPØØØ DS304MPØØØ 50 DF307FPØØØ 7 DS307MPØØØ 8" 600 DF34FPØØØ DS34MPØØØ 08 DF36FPØØØ DS36MPØØØ 77/480 DF3304FPØØØ DS3304MPØØØ 3 4 5/50 DF3307FPØØØ " DS3307MPØØØ 0/08 DF336FPØØØ DS336MPØØØ 3Ø 480 DF3404FPØØØ DS3404MPØØØ 3Ø 50 DF3407FPØØØ DS3407MPØØØ 3 4 3Ø 600 DF344FPØØØ " DS344MPØØØ 3Ø 08 DF346FPØØØ DS346MPØØØ 3Ø 440 DF34FPØØØ DS34MPØØØ 3ØY 77/480 DF3504FPØØØ DS3504MPØØØ 3ØY 347/600 DF354FPØØØ DS354MPØØØ " 3ØY 0/08 DF356FPØØØ DS356MPØØØ 3ØY 50/440 DF35FPØØØ DS35MPØØØ t Standard Bushing I.D. 7 8" 7 8" " " 3 6" H-308

14 Maxard Interconnection Systems 0 7 8" 3 8" Male Inlet with Angle Enclosure 6 4" 9 5 8" Male Inlet with Angle Adapter** and Junction Box 3" 9" Male Inlet with Angle Adapter** 9 5 8" 6" Male Inlet 7 8" " 5 " CAT. O. CAT. O. CAT. O. CAT. O. t t t t ds304mrøeøds304mrabø DS304MRAØØ DS304MRØØØ DS307MRØEØ DS307MRABØ DS307MRAØØ DS307MRØØØ DS304MRØEØ DS304MRABØ DS304MRAØØ DS304MRØØØ DS307MRØEØ DS307MRABØ DS307MRAØØ DS307MRØØØ DS34MRØEØ DS34MRABØ DS34MRAØØ DS34MRØØØ DS36MRØEØ DS36MRABØ DS36MRAØØ DS36MRØØØ DS3304MRØEØ DS3304MRABØ DS3304MRAØØ DS3304MRØØØ DS3307MRØEØ DS3307MRABØ DS3307MRAØØ DS3307MRØØØ DS336MRØEØ DS336MRABØ DS336MRAØØ DS336MRØØØ DS3404MRØEØ DS3404MRABØ DS3404MRAØØ DS3404MRØØØ DS3407MRØEØ DS3407MRABØ DS3407MRAØØ DS3407MRØØØ DS344MRØEØ DS344MRABØ DS344MRAØØ DS344MRØØØ DS346MRØEØ DS346MRABØ DS346MRAØØ DS346MRØØØ DS34MRØEØ DS34MRABØ DS34MRAØØ DS34MRØØØ DS3504MRØEØ DS3504MRABØ DS3504MRAØØ DS3504MRØØØ DS354MRØEØ DS354MRABØ DS354MRAØØ DS354MRØØØ DS356MRØEØ DS356MRABØ DS356MRAØØ DS356MRØØØ DS35MRØEØ DS35MRABØ DS35MRAØØ DS35MRØØØ H-309

15 Maxard Interconnection Systems 60 Amp Standard Service ** If receptacle is desired with a Straight Adapter instead of standard Angle Adapter, substitute S for the A in the catalog number of the Receptacle with Angle Adapter or Adapter and Box. Standard cable bushings shown; see page H-334 for other sizes available at no extra cost if specified on order. Always furnished with screw collar. We recommend cup cap with male plug; order catalog number DS6CC. Maximum lug wire 4 AW 7-strand or flexible, cable entrance.30" diameter. Receptacles furnished with flap cap also have screw thread to accept male collar on plug. Catalog numbers shown are for flap cap receptacles; change DF to DS for ordering screw cap. Boldface figures are for voltage assignment. For different ratings, see page H-340. Outlet furnished at location B unless otherwise specified. " PT. B t Control contacts for plug/receptacles: Use K where noted. Ex: DS604MP00K For Adapters, Junction Boxes and Accessories, see pages H-334 H-337. Device Ratings and Polarizations Maximum 600VAC or 50VDC (For full polarization, see page H-340) A D C Male Plug 5 " 9 8" Female Connector 5 3 8" 0" Pole Wire Conductor Placement Standard Bushing 60 Hz Cat. o. I.D. Cat. o. t t 77 DS604MPØØØ DF604FPØØØ 3 6" 5 DS607MPØØØ DF607FPØØØ 480 DS604MPØØØ DF604FPØØØ 50 DS607MPØØØ DF607FPØØØ 3 6" 600 DS64MPØØØ DF64FPØØØ 08 DS66MPØØØ DF66FPØØØ 77/480 DS6304MPØØØ DF6304FPØØØ 5/50 DS6307MPØØØ 5 6" DF6307FPØØØ 0/08 DS636MPØØØ DF636FPØØØ 3Ø 480 DS6404MPØØØ DF6404FPØØØ 3Ø 50 DS6407MPØØØ DF6407FPØØØ 3Ø 600 DS644MPØØØ 5 6" DF644FPØØØ 3Ø 08 DS646MPØØØ DF646FPØØØ 3Ø 440 DS64MPØØØ DF64FPØØØ 3ØY 77/480 DS6504MPØØØ DF6504FPØØØ 3ØY 347/600 DS654MPØØØ DF654FPØØØ " 3ØY 0/08 DS656MPØØØ DF656FPØØØ 3ØY 50/440 DS65MPØØØ DF65FPØØØ Standard Bushing I.D. 3 6" 3 6" 5 6" 5 6" " H-30

16 Maxard Interconnection Systems 8" Female Receptacle with Angle Enclosure 4" 7 8" 9 3 4" Female Receptacle with Angle Adapter** and Junction Box 3" 0 " 9 3 4" Female Receptacle with Angle Adapter** 7 " Female Receptacle 3 3 8" 5 8" CAT. O. CAT. O. CAT. O. CAT. O. t t t t DF604FRØEØdF604FRABØ DF604FRAØØ DF604FRØØØ DF607FRØEØ DF607FRABØ DF607FRAØØ DF607FRØØØ DF604FRØEØ DF604FRABØ DF604FRAØØ DF604FRØØØ DF607FRØEØ DF607FRABØ DF607FRAØØ DF607FRØØØ DF64FRØEØ DF64FRABØ DF64FRAØØ DF64FRØØØ DF66FRØEØ DF66FRABØ DF66FRAØØ DF66FRØØØ DF6304FRØEØ DF6304FRABØ DF6304FRAØØ DF6304FRØØØ DF6307FRØEØ DF6307FRABØ DF6307FRAØØ DF6307FRØØØ DF636FRØEØ DF636FRABØ DF636FRAØØ DF636FRØØØ DF6404FRØEØ DF6404FRABØ DF6404FRAØØ DF6404FRØØØ DF6407FRØEØ DF6407FRABØ DF6407FRAØØ DF6407FRØØØ DF644FRØEØ DF644FRABØ DF644FRAØØ DF644FRØØØ DF646FRØEØ DF646FRABØ DF646FRAØØ DF646FRØØØ DF64FRØEØ DF64FRABØ DF64FRAØØ DF64FRØØØ DF6504FRØEØ DF6504FRABØ DF6504FRAØØ DF6504FRØØØ DF654FRØEØ DF654FRABØ DF654FRAØØ DF654FRØØØ DF656FRØEØ DF656FRABØ DF656FRAØØ DF656FRØØØ DF65FRØEØ DF65FRABØ DF65FRAØØ DF65FRØØØ H-3

17 Maxard Interconnection Systems 60 Amp * otes to Catalog umbers Control Contacts (position ) use K example: DBRF604030K0 Shunt Trip Breaker (position 3) add Z to above: DBRF604030KZ Breaker Trip Ratings (positions 9, 0, ) 30 amp use amp use amp use 050 on-auto Sw. AO (repl. DBRF with DSRF ) Conduit Hubs: EMA 4X Std. " PT-thread outlet at B (or E) 60 amp Max. "/64mm E B - std. tcontrol contacts K designation. A Conduit Hubs: XP Std. " -thread outlets provided at A, B or C 60 amp.50"/38mm B - std. on-fused version available. Replace DFRF with DRF. Boldface figures are for voltage assignment. For different ratings, see page H-340. Device Ratings and Polarizations Maximum 600VAC or 50VDC (For full polarization, see page H-340) C Interlocked Receptacle with Circuit Breaker EMA 4X 3 8" 6 4" 5 8" 3 8" " 8 3 4" 6 " Explosion-Proof Interlocked Receptacle Class I, Class II 8 3 4" 7 " 4 3 4" " 0" Pole Wire Conductor Placement 60 hz CAT. O. CAT. O. * * 77 DBRF604Ø6ØØØ DBRE604Ø6ØØØ 5 DBRF607Ø6ØØØ DBRE607Ø6ØØØ 480 DBRF604Ø6ØØØ DBRE604Ø6ØØØ 50 DBRF607Ø6ØØØ DBRE607Ø6ØØØ 600 DBRF64Ø6ØØØ DBRE64Ø6ØØØ 08 DBRF66Ø6ØØØ DBRE66Ø6ØØØ 77/480 DBRF6304Ø6ØØØ DBRE6304Ø6ØØØ 5/50 DBRF6307Ø6ØØØ DBRE6307Ø6ØØØ 0/08 DBRF636Ø6ØØØ DBRE636Ø6ØØØ 3Ø 480 DBRF6404Ø6ØØØ DBRE6404Ø6ØØØ 3Ø 50 DBRF6407Ø6ØØØ DBRE6407Ø6ØØØ 3Ø 600 DBRF644Ø6ØØØ DBRE644Ø6ØØØ 3Ø 08 DBRF646Ø6ØØØ DBRE646Ø6ØØØ 3Ø 440 DBRF64Ø6ØØØ DBRE64Ø6ØØØ 3ØY 77/480 DBRF6504Ø3ØØØ DBRE6504Ø6ØØØ 3ØY 347/600 DBRF654Ø6ØØØ DBRE654Ø6ØØØ 3ØY 0/08 DBRF656Ø6ØØØ DBRE656Ø6ØØØ 3ØY 50/440 DBRF65Ø6ØØØ DBRE65Ø6ØØØ H-3

18 Maxard Interconnection Systems Fused Disconnect Interlocked Receptacle EMA /3R Fasteners Screws ( places) Holes for Padlock ( places) 5 3 4" 5" 9 " 3 4" 30" 4" 6" solution 60 Amp Convention Centers and Arenas Power for Trade Show Exhibits and Concerts 7 " CAT. O. t DFRF604Ø DFRF607Ø DFRF604Ø DFRF607Ø DFRF64Ø DFRF66Ø DFRF6304Ø DFRF6307Ø DFRF636Ø DFRF6404Ø DFRF6407Ø DFRF644Ø DFRF646Ø DFRF64Ø DFRF6504Ø DFRF654Ø DFRF656Ø DFRF65Ø H-33

19 Maxard Interconnection Systems 60 Amp Reverse Service ** If receptacle is desired with a Straight Adapter instead of standard Angle Adapter, substitute S for the A in the catalog number of the Receptacle with Angle Adapter or Adapter and Box. Standard cable bushings shown; see page H-334 for other sizes available at no extra cost if specified on order. Always furnished with screw collar. We recommend cup cap with male plug; order catalog number DS6CC. Maximum lug wire 4 AW 7-strand or flexible, cable entrance.30" diameter. Receptacles furnished with flap cap also have screw thread to accept male collar on plug. Catalog numbers shown are for flap cap receptacles; change DF to DS for ordering screw cap. Boldface figures are for voltage assignment. For different ratings, see page H-340. Outlet furnished at location B unless B otherwise specified. " PT. t Control contacts for plug/receptacles: Use K where noted. Ex: DS304MP00K For Adapters, Junction Boxes and Accessories, see pages H-334 H-337. Device Ratings and Polarizations Maximum 600VAC or 50VDC (For full polarization, see page H-340) A D C Female Connector 5 3 8" 0" Male Plug 5 " 9 8" Pole Wire Conductor Placement Standard Bushing 60 hz Cat. o. I.D. Cat. o. t t 77 DF604FPØØØ DS604MPØØØ 3 6" 5 DF607FPØØØ DS607MPØØØ 480 DF604FPØØØ DS604MPØØØ 50 DF607FPØØØ DS607MPØØØ 3 6" 600 DF64FPØØØ DS64MPØØØ 08 DF66FPØØØ DS66MPØØØ 77/480 DF6304FPØØØ DS6304MPØØØ 5/50 DF6307FPØØØ 5 6" DS6307MPØØØ 0/08 DF636FPØØØ DS636MPØØØ 3Ø 480 DF6404FPØØØ DS6404MPØØØ 3Ø 50 DF6407FPØØØ DS6407MPØØØ 3Ø 600 DF644FPØØØ 5 6" DS644MPØØØ 3Ø 08 DF646FPØØØ DS646MPØØØ 3Ø 440 DF64FPØØØ DS64MPØØØ 3ØY 77/480 DF6504FPØØØ DS6504MPØØØ 3ØY 347/600 DF654FPØØØ DS654MPØØØ " 3ØY 0/08 DF656FPØØØ DS656MPØØØ 3ØY 50/440 DF65FPØØØ DS65MPØØØ Standard Bushing I.D. 3 6" 3 6" 5 6" 5 6" " H-34

20 Maxard Interconnection Systems " 4" Male Inlet with Angle Enclosure 6 7 8" 0 8" Male Inlet with Angle Adapter** and Junction Box 3" 0 4" Male Inlet with Angle Adapter** 0 8" 7 4" Male Inlet 3 3 8" " 5 " Cat. o. Cat. o. Cat. o. Cat. o. t t t t ds604mrøeøds604mrabø DS604MRAØØ DS604MRØØØ DS607MRØEØ DS607MRABØ DS607MRAØØ DS607MRØØØ DS604MRØEØ DS604MRABØ DS604MRAØØ DS604MRØØØ DS607MRØEØ DS607MRABØ DS607MRAØØ DS607MRØØØ DS64MRØEØ DS64MRABØ DS64MRAØØ DS64MRØØØ DS66MRØEØ DS66MRABØ DS66MRAØØ DS66MRØØØ DS6304MRØEØ DS6304MRABØ DS6304MRAØØ DS6304MRØØØ DS6307MRØEØ DS6307MRABØ DS6307MRAØØ DS6307MRØØØ DS636MRØEØ DS636MRABØ DS636MRAØØ DS636MRØØØ DS6404MRØEØ DS6404MRABØ DS6404MRAØØ DS6404MRØØØ DS6407MRØEØ DS6407MRABØ DS6407MRAØØ DS6407MRØØØ DS644MRØEØ DS644MRABØ DS644MRAØØ DS644MRØØØ DS646MRØEØ DS646MRABØ DS646MRAØØ DS646MRØØØ DS64MRØEØ DS64MRABØ DS64MRAØØ DS64MRØØØ DS6504MRØEØ DS6504MRABØ DS6504MRAØØ DS6504MRØØØ DS654MRØEØ DS654MRABØ DS654MRAØØ DS654MRØØØ DS656MRØEØ DS656MRABØ DS656MRAØØ DS656MRØØØ DS65MRØEØ DS65MRABØ DS65MRAØØ DS65MRØØØ H-35

21 Maxard Interconnection Systems 00 Amp Standard Service ** If receptacle is desired with a Straight Adapter instead of standard Angle Adapter, substitute S for the A in the catalog number of the Receptacle with Angle Adapter or Adapter and Box. Standard cable bushings shown; see page H-334 for other sizes available at no extra cost if specified on order. Always furnished with screw collar. We recommend cup cap with male plug; order catalog number DSCC. Maximum lug wire 0 AW 9-strand or AW flexible, cable entrance.386" diameter. Receptacles furnished with flap cap also have screw thread to accept male collar on plug. Catalog numbers shown are for flap cap receptacles; change DF to DS for ordering screw cap. Boldface figures are for voltage assignment. B For different ratings, see page H-340. Outlet furnished at location B unless otherwise A specified. " PT. t Control contacts for plug/receptacles: Use K where noted. Ex: DS04MP00K For Adapters, Junction Boxes and Accessories, see pages H-334 H-337. Device Ratings and Polarizations Maximum 600VAC or 50VDC (For full polarization, see page H-340) D C Male Plug 6 " 0 8" Female Connector 5 3 8" 8" Pole Wire Conductor Placement Standard 60hz CAT. O. Bushing I.D. CAT. O. t t 77 DS04MPØØØ DF04FPØØØ 6" 5 DS07MPØØØ DF07FPØØØ 480 DS04MPØØØ DF04FPØØØ 50 DS07MPØØØ DF07FPØØØ 6" 600 DS4MPØØØ DF4FPØØØ 08 DS6MPØØØ DF6FPØØØ 77/480 DS304MPØØØ DF304FPØØØ 5/50 DS307MPØØØ 3 6" DF307FPØØØ 0/08 DS36MPØØØ DF36FPØØØ 3Ø 480 DS404MPØØØ DF404FPØØØ 3Ø 50 DS407MPØØØ DF407FPØØØ 3Ø 600 DS44MPØØØ 3 6" DF44FPØØØ 3Ø 08 DS46MPØØØ DF46FPØØØ 3Ø 440 DS4MPØØØ DF4FPØØØ 3ØY 77/480 DS504MPØØØ DF504FPØØØ 3ØY 347/600 DS54MPØØØ DF54FPØØØ " 3ØY 8/08 DS56MPØØØ DF56FPØØØ 3ØY 50/440 DS5MPØØØ DF5FPØØØ Standard Bushing I.D. 6" 6" 3 6" 3 6" " H-36

22 Maxard Interconnection Systems Female Receptacle with Angle Enclosure 3 8" 4" 7 7 " 0" Female Receptacle with Angle Adapter** and Junction Box 3 3 4" 0 3 4" Female Receptacle with Angle Adapter** 0" 7" Female Receptacle 3 5 8" 3 5 8" CAT. O. CAT. O. CAT. O. CAT. O. t t t t DF04FRØEØdF04FRABØ DF04FRAØØ DF04FRØØØ DF07FRØEØ DF07FRABØ DF07FRAØØ DF07FRØØØ DF04FRØEØ DF04FRABØ DF04FRAØØ DF04FRØØØ DF07FRØEØ DF07FRABØ DF07FRAØØ DF07FRØØØ DF4FRØEØ DF4FRABØ DF4FRAØØ DF4FRØØØ DF6FRØEØ DF6FRABØ DF6FRAØØ DF6FRØØØ DF304FRØEØ DF304FRABØ DF304FRAØØ DF304FRØØØ DF307FRØEØ DF307FRABØ DF307FRAØØ DF307FRØØØ DF36FRØEØ DF36FRABØ DF36FRAØØ DF36FRØØØ DF404FRØEØ DF404FRABØ DF404FRAØØ DF404FRØØØ DF407FRØEØ DF407FRABØ DF407FRAØØ DF407FRØØØ DF44FRØEØ DF44FRABØ DF44FRAØØ DF44FRØØØ DF46FRØEØ DF46FRABØ DF46FRAØØ DF46FRØØØ DF4FRØEØ DF4FRABØ DF4FRAØØ DF4FRØØØ DF504FRØEØ DF504FRABØ DF504FRAØØ DF504FRØØØ DF54FRØEØ DF54FRABØ DF54FRAØØ DF54FRØØØ DF56FRØEØ DF56FRABØ DF56FRAØØ DF56FRØØØ DF5FRØEØ DF5FRABØ DF5FRAØØ DF5FRØØØ H-37

23 Maxard Interconnection Systems 00 Amp otes to Catalog umbers * Control Contacts (position ) use K example: DBRF04030K0 Shunt Trip Breaker (position 3) add Z to above: DBRF04030KZ Breaker Trip Ratings (positions 9, 0, ) 70 amp use amp use amp use 090 on-auto Sw. AO (repl. DBRF with DSRF ) Conduit Hubs: EMA 4X Std. " PT-thread outlet at B (or E) 00 amp Max. "/64mm E B - std. Conduit Hubs: XP Std. " -thread outlets provided at A, B or C 00 amp.00"/5mm B - std. on-fused version available. Replace DFRF with DRF. Boldface figures are for voltage assignment. For different ratings, see page H-340. Device Ratings and Polarizations Maximum 600VAC or 50VDC (For full polarization, see page H-340) A C Interlocked Receptacle with Circuit Breaker EMA 4X 3 8" 7 3 4" 6 5 8" 3 8" " 8 3 4" 6 " Pole Wire Conductor Placement 60 Hz Cat. o. 77 DBRF04ØØØ 5 DBRF07ØØØ 480 DBRF04ØØØ 50 DBRF07ØØØ 600 DBRF4ØØØ 08 DBRF6ØØØ 77/480 DBRF304ØØØ 5/50 DBRF307ØØØ 0/08 DBRF36ØØØ 3Ø 480 DBRF404ØØØ 3Ø 50 DBRF407ØØØ 3Ø 600 DBRF44ØØØ 3Ø 08 DBRF46ØØØ 3Ø 440 DBRF4ØØØ 3ØY 77/480 DBRF504ØØØ 3ØY 347/600 DBRF54ØØØ 3ØY 0/08 DBRF56ØØØ 3ØY 50/440 DBRF5ØØØ * H-38

24 Maxard Interconnection Systems Explosion-Proof Interlocked Receptacle Class I, Class II 8 3 4" 7 " " 4 3 4" 0" Fused Disconnect Interlocked Receptacle EMA /3R Fasteners Screws ( places) Holes for Padlock ( places) 5 4 5" 5" 9 " 3 4" 30" 4" 9 50" 7 " CAT. O. * DBRE04ØØØ DBRE07ØØØ DBRE04ØØØ DBRE07ØØØ DBRE4ØØØ DBRE6ØØØ DBRE304ØØØ DBRE307ØØØ DBRE36ØØØ DBRE404ØØØ DBRE407ØØØ DBRE44ØØØ DBRE46ØØØ DBRE4ØØØ DBRE504ØØØ DBRE54ØØØ DBRE56ØØØ DBRE5ØØØ CAT. O. DFRF04Ø DFRF07Ø DFRF04Ø DFRF07Ø DFRF4Ø DFRF6Ø DFRF304Ø DFRF307Ø DFRF36Ø DFRF404Ø DFRF407Ø DFRF44Ø DFRF46Ø DFRF4Ø DFRF504Ø DFRF54Ø DFRF56Ø DFRF5Ø H-39

25 Maxard Interconnection Systems 00 Amp Reverse Service ** If receptacle is desired with a Straight Adapter instead of standard Angle Adapter, substitute S for the A in the catalog number of the Receptacle with Angle Adapter or Adapter and Box. Standard cable bushings shown; see page H-334 for other sizes available at no extra cost if specified on order. Always furnished with screw collar. We recommend cup cap with male plug; order catalog number DSCC. Maximum lug wire 0 AW 9-strand or AW flexible, cable entrance.386" diameter. Receptacles furnished with flap cap also have screw thread to accept male collar on plug. Catalog numbers shown are for flap cap receptacles; change DF to DS for ordering screw cap. Boldface figures are for voltage assignment. For different ratings, see page H-340. Outlet furnished at location B unless otherwise B specified. " PT. t Control contacts for plug/receptacles: Use K where noted. Ex: DS04MR00K For Adapters, Junction Boxes and Accessories, see pages H-334 H-337. Device Ratings and Polarizations Maximum 600VAC or 50VDC (For full polarization, see page H-340) A D C Female Connector 5 3 8" 8" Male Plug 6 " 0 8" Pole Wire Conductor Placement 60 Hz Cat. o. t Standard Bushing I.D. Cat. o. t Standard Bushing I.D DF04FPØØØ DS04MPØØØ 6" 5 DF07FPØØØ DS07MPØØØ 480 DF04FPØØØ DS04MPØØØ 50 DF07FPØØØ DS07MPØØØ 6" 600 DF4FPØØØ DS4MPØØØ 08 DF6FPØØØ DS6MPØØØ 77/480 DF304FPØØØ DS304MPØØØ 5/50 DF307FPØØØ 3 6" DS307MPØØØ 0/08 DF36FPØØØ DS36MPØØØ 3Ø 480 DF404FPØØØ DS404MPØØØ 3Ø 50 DF407FPØØØ DS407MPØØØ 3Ø 600 DF44FPØØØ 3 6" DS44MPØØØ 3Ø 08 DF46FPØØØ DS46MPØØØ 3Ø 440 DF4FPØØØ DS4MPØØØ 3ØY 77/480 DF504FPØØØ DS504MPØØØ 3ØY 347/600 DF54FPØØØ DS54MPØØØ " 3ØY 0/08 DF56FPØØØ DS56MPØØØ 3ØY 50/440 DF5FPØØØ DS5MPØØØ 6" 6" 3 6" 3 6" " H-30

26 Maxard Interconnection Systems " 4" Male Inlet with Angle Enclosure 7 3 8" 0 8" Male Inlet with Angle Adapter** and DJB3 Junction Box 3 3 4" 0 5 8" Male Inlet with Angle Adapter** 0 8" 6 7 8" Male Inlet 3 3 8" " 5 " CAT. O. CAT. O. CAT. O. CAT. O. t t t t DS04MRØEØDS04MRABØ DS04MRAØØ DS04MRØØØ DS07MRØEØ DS07MRABØ DS07MRAØØ DS07MRØØØ DS04MRØEØ DS04MRABØ DS04MRAØØ DS04MRØØØ DS07MRØEØ DS07MRABØ DS07MRAØØ DS07MRØØØ DS4MRØEØ DS4MRABØ DS4MRAØØ DS4MRØØØ DS6MRØEØ DS6MRABØ DS6MRAØØ DS6MRØØØ DS304MRØEØ DS304MRABØ DS304MRAØØ DS304MRØØØ DS307MRØEØ DS307MRABØ DS307MRAØØ DS307MRØØØ DS36MRØEØ DS36MRABØ DS36MRAØØ DS36MRØØØ DS404MRØEØ DS404MRABØ DS404MRAØØ DS404MRØØØ DS407MRØEØ DS407MRABØ DS407MRAØØ DS407MRØØØ DS44MRØEØ DS44MRABØ DS44MRAØØ DS44MRØØØ DS46MRØEØ DS46MRABØ DS46MRAØØ DS46MRØØØ DS4MRØEØ DS4MRABØ DS4MRAØØ DS4MRØØØ DS504MRØEØ DS504MRABØ DS504MRAØØ DS504MRØØØ DS54MRØEØ DS54MRABØ DS54MRAØØ pds54mrøøø DS56MRØEØ DS56MRABØ DS56MRAØØ DS56MRØØØ DS5MRØEØ DS5MRABØ DS5MRAØØ DS5MRØØØ H-3

27 Maxard Interconnection Systems 00 Amp Standard Service ** If receptacle is desired with a Straight Adapter instead of standard Angle Adapter, substitute S for the A in the catalog number of the Receptacle with Angle Adapter or Adapter and Box. Standard cable bushings shown; see page H-334 for other sizes available at no extra cost if specified on order. Always furnished with screw collar. We recommend cup cap with male plug; order catalog number DSCC. Maximum lug wire 4/0 AW 9-strand or flexible, cable entrance.65" diameter. Receptacles furnished with flap cap also have screw thread to accept male collar on plug. Catalog numbers shown are for flap cap receptacles; change DF to DS for ordering screw cap. Boldface figures are for voltage assignment. For different ratings, see page H-340. Outlet furnished at location B unless B otherwise specified. 3" PT. t Control contacts for plug/receptacles: Use K where noted. Ex: DS04MP00K For Adapters, Junction Boxes and Accessories, see pages H-334 H-337. Device Ratings and Polarizations Maximum 600VAC or 50VDC (For full polarization, see page H-340) A D C Male Plug 9" 3 3 4" Female Connector 9 " 5" Pole Wire Conductor Placement 60 Hz Cat. o. t Standard Bushing I.D. Cat. o. t Standard Bushing I.D DS04MPØØØ DF04FPØØØ 8" 5 DS07MPØØØ DF07FPØØØ 480 DS04MPØØØ DF04FPØØØ 50 DS07MPØØØ DF07FPØØØ 8" 600 DS4MPØØØ DF4FPØØØ 08 DS6MPØØØ DF6FPØØØ 77/480 DS304MPØØØ DF304FPØØØ 5/50 DS307MPØØØ 4" DF307FPØØØ 0/08 DS36MPØØØ DF36FPØØØ 3Ø 480 DS404MPØØØ DF404FPØØØ 3Ø 50 DS407MPØØØ DF407FPØØØ 3Ø 600 DS44MPØØØ 4" DF44FPØØØ 3Ø 08 DS46MPØØØ DF46FPØØØ 3Ø 440 DS4MPØØØ DF4FPØØØ 3ØY 77/480 DS504MPØØØ DF504FPØØØ 3ØY 347/600 DS54MPØØØ DF54FPØØØ " 3ØY 0/08 DS56MPØØØ DF56FPØØØ 3ØY 50/440 DS5MPØØØ DF5FPØØØ 8" 8" 4" 4" " H-3

28 Maxard Interconnection Systems 4 5 8" Female Receptacle with Angle Adapter** and Junction Box 6 5 8" 5 3 4" Female Receptacle with Angle Adapter** 4 3 4" 9 " Female Receptacle 5 4" 6 5 8" CAT. O. CAT. O. CAT. O. t t t DF04FRABØ DF04FRAØØ DF04FRØØØ DF07FRABØ DF07FRAØØ DF07FRØØØ DF04FRABØ DF04FRAØØ DF04FRØØØ DF07FRABØ DF07FRAØØ DF07FRØØØ DF4FRABØ DF4FRAØØ DF4FRØØØ DF6FRABØ DF6FRAØØ DF6FRØØØ DF304FRABØ DF304FRAØØ DF304FRØØØ DF307FRABØ DF307FRAØØ DF307FRØØØ DF36FRABØ DF36FRAØØ DF36FRØØØ DF404FRABØ DF404FRAØØ DF404FRØØØ DF407FRABØ DF407FRAØØ DF407FRØØØ DF44FRABØ DF44FRAØØ DF44FRØØØ DF46FRABØ DF46FRAØØ DF46FRØØØ DF4FRABØ DF4FRAØØ DF4FRØØØ DF504FRABØ DF504FRAØØ DF504FRØØØ DF54FRABØ DF54FRAØØ DF54FRØØØ DF56FRABØ DF56FRAØØ DF56FRØØØ DF5FRABØ DF5FRAØØ DF5FRØØØ H-33

29 Maxard Interconnection Systems 00 Amp otes to Catalog umbers * Control Contacts (position ) use K example: DBRF0400K0 Shunt Trip Breaker (position 3) add Z to above: DBRF0400KZ Breaker Trip Ratings (positions 9, 0, ) 50 amp use amp use amp use 00 on-auto Sw. AO (repl. DBRF with DSRF ) Conduit Hubs: EMA 4X Std. " PT-thread outlet at B (or E) 00 amp Max mm Boldface figures are for voltage assignment. For different ratings, see page H-340. Device Ratings and Polarizations E B - std. Interlocked Receptacle with Circuit Breaker EMA 4X 9 6" 6 4" 4 3 4" 5" " 4" 9" Maximum 600VAC or 50VDC (For full polarization, see page H-340) Pole Wire Conductor Placement 60 Hz Cat. o. 77 DBRF04ØØØ 5 DBRF07ØØØ 480 DBRF04ØØØ 50 DBRF07ØØØ 600 DBRF4ØØØ 08 DBRF6ØØØ 77/480 DBRF304ØØØ 5/50 DBRF307ØØØ 0/08 DBRF36ØØØ 3Ø 480 DBRF404ØØØ 3Ø 50 DBRF407ØØØ 3Ø 600 DBRF44ØØØ 3Ø 08 DBRF46ØØØ 3Ø 440 DBRF4ØØØ 3ØY 77/480 DBRF504ØØØ 3ØY 347/600 DBRF54ØØØ 3ØY 0/08 DBRF56ØØØ 3ØY 50/440 DBRF5ØØØ * H-34

30 Maxard Interconnection Systems Staten Island Ferry 00A Maxard inlets with disconnects solution 00 Amp 00A Maxard connections on ferry deck 30A and 00A Maxard interlocks 00A Maxard interlocks in parallel H-35

31 Maxard Interconnection Systems 00 Amp Reverse Service ** If receptacle is desired with a Straight Adapter instead of standard Angle Adapter, substitute S for the A in the catalog number of the Receptacle with Angle Adapter or Adapter and Box. Standard cable bushings shown; see page H-334 for other sizes available at no extra cost if specified on order. Always furnished with screw collar. We recommend cup cap with male plug; order catalog number DSCC. Maximum lug wire 4/0 AW 9-strand or flexible, cable entrance.65" diameter. Receptacles furnished with flap cap also have screw thread to accept male collar on plug. Catalog numbers shown are for flap cap receptacles; change DF to DS for ordering screw cap. Boldface figures are for voltage assignment. For different ratings, see page H-340. Outlet furnished at location B unless otherwise specified. 3" PT. t Control contacts for plug/receptacles: Use K where noted. Ex: DS04MR00K For Adapters, Junction Boxes and Accessories, see pages H-334 H-337. Device Ratings and Polarizations Maximum 600VAC or 50VDC (For full polarization, see page H-340) A B D C Female Connector 9 " 5" Male Plug 9" 3 3 4" Pole Wire Conductor Placement 60 Hz Cat. o. t Standard Bushing I.D. Cat. o. t Standard Bushing I.D DF04FPØØØ DS04MPØØØ 8" 5 DF07FPØØØ DS07MPØØØ 480 DF04FPØØØ DS04MPØØØ 50 DF07FPØØØ DS07MPØØØ 8" 600 DF4FPØØØ DS4MPØØØ 08 DF6FPØØØ DS6MPØØØ 77/480 DF304FPØØØ DS304MPØØØ 5/50 DF307FPØØØ 4" DS307MPØØØ 0/08 DF36FPØØØ DS36MPØØØ 3Ø 480 DF404FPØØØ DS404MPØØØ 3Ø 50 DF407FPØØØ DS407MPØØØ 3Ø 600 DF44FPØØØ 4" DS44MPØØØ 3Ø 08 DF46FPØØØ DS46MPØØØ 3Ø 440 DF4FPØØØ DS4MPØØØ 3ØY 77/480 DF504FPØØØ DS504MPØØØ 3ØY 347/600 DF54FPØØØ DS54MPØØØ " 3ØY 0/08 DF56FPØØØ DS56MPØØØ 3ØY 50/440 DF5FPØØØ DS5MPØØØ 8" 8" 4" 4" " H-36

32 Maxard Interconnection Systems 4 7 8" Male Inlet with Angle Enclosure 6 5 8" 5 " Male Inlet with Angle Adapter** 5" 9 4" Male Inlet 4" 3 " 9 4" MMI Trailer solution 00 Amp Application: Electrical hook-up of mobile medical imaging (MMI) trailers Mobile medical units provide trailertransportable blood banks, dental clinics, magnetic resonance imaging (MRI), X-ray and other diagnostic equipment to many hospitals and clinics throughout the country on a regular leased basis. Safe outdoor usage connections are required for up to 00-amp power supplies at each facility. Major specialized custom trailer manufacturers rely on the Maxard 00-amp interface. CAT. O. CAT. O. CAT. O. t t t Installation: DS04MRABØ DS04MRAØØ DS04MRØØØ DS07MRABØ DS07MRAØØ DS07MRØØØ DS04MRABØ DS04MRAØØ DS04MRØØØ DS07MRABØ DS07MRAØØ DS07MRØØØ DS4MRABØ DS4MRAØØ DS4MRØØØ DS6MRABØ DS6MRAØØ DS6MRØØØ DS304MRABØ DS304MRAØØ DS304MRØØØ DS307MRABØ DS307MRAØØ DS307MRØØØ DS36MRABØ DS36MRAØØ DS36MRØØØ DS404MRABØ DS404MRAØØ DS404MRØØØ DS407MRABØ DS407MRAØØ DS407MRØØØ DS44MRABØ DS44MRAØØ DS44MRØØØ DS46MRABØ DS46MRAØØ DS46MRØØØ DS4MRABØ DS4MRAØØ DS4MRØØØ DS504MRABØ DS504MRAØØ DS504MRØØØ DS54MRABØ DS54MRAØØ DS54MRØØØ DS56MRABØ DS56MRAØØ DS56MRØØØ DS5MRABØ DS5MRAØØ DS5MRØØØ Site-mounted 00-amp receptacles with trailer-mounted plugs and connectors When a mobile medical unit trailer is at the desired location, a heavy-duty Maxard 00-amp cable assembly connects the trailer with a corresponding receptacle or connector at each site, usually mounted on an outside wall. A primary safety feature is the receptacle s gated deadfront construction that ensures no exterior access to live receptacle contacts. With so many different hands involved on a daily basis, the Maxard epoxy powder-coat finish and rugged waterproof construction provide hospitalsafe long service life. H-37

33 Maxard Interconnection Systems 400 Amp Standard Service ** If receptacle is desired with a Straight Adapter instead of standard Angle Adapter, substitute S for the A in the catalog number of the Receptacle with Angle Adapter or Adapter and Box. Standard cable bushings shown; see page H-334 for other sizes available at no extra cost if specified on order. Always furnished with screw collar. We recommend cup cap with male plug; order catalog number DS4CC. Maximum lug wire 500 kcmil 37-strand or flexible, cable entrance.937" diameter. Receptacles furnished with flap cap also have screw thread to accept male collar on plug. Catalog numbers shown are for flap cap receptacles; change DF to DS for ordering screw cap. Boldface figures are for voltage assignment. For different ratings, see page H-340. Outlet furnished at location B unless otherwise B specified. 4" PT. t Control contacts for plug/receptacles: Use K where noted. Ex: DS404MP00K For Adapters, Junction Boxes and Accessories, see pages H-334 H-337. Device Ratings and Polarizations Maximum 600VAC or 50VDC (For full polarization, see page H-340) A C Male Plug D 5 8" 7 5 8" Female Connector 0 3 4" 9 8" Pole Wire Conductor Placement 60 Hz Cat. o. t Standard Bushing I.D. Cat. o. t Standard Bushing I.D DS404MPØØØ DF404FPØØØ 5 DS407MPØØØ DF407FPØØØ 480 DS404MPØØØ DF404FPØØØ 4" 50 DS407MPØØØ DF407FPØØØ 600 DS44MPØØØ DF44FPØØØ 08 DS46MPØØØ DF46FPØØØ 77/480 DS4304MPØØØ DF4304FPØØØ 5/50 DS4307MPØØØ DF4307FPØØØ 0/08 DS436MPØØØ DF436FPØØØ 3Ø 480 DS4404MPØØØ DF4404FPØØØ 3" 3Ø 50 DS4407MPØØØ DF4407FPØØØ 3Ø 600 DS444MPØØØ DF444FPØØØ 3Ø 08 DS446MPØØØ DF446FPØØØ 3Ø 440 DS44MPØØØ DF44FPØØØ 3ØY 77/480 DS4504MPØØØ DF4504FPØØØ 3ØY 347/600 DS454MPØØØ DF454FPØØØ 3 4" 3ØY 0/08 DS456MPØØØ DF456FPØØØ 3ØY 50/440 DS45MPØØØ DF45FPØØØ 4" 3" 3 4" H-38

34 Maxard Interconnection Systems 0 3 4" Female Receptacle with Angle Adapter** and Junction Box " 5 4" Female Receptacle with Angle Adapter** 0 3 4" 3 4" Female Receptacle 7" 7 8" CAT. O. CAT. O. CAT. O. t t t DF404FRABØ DF404FRAØØ DF404FRØØØ DF407FRABØ DF407FRAØØ DF407FRØØØ DF404FRABØ DF404FRAØØ DF404FRØØØ DF407FRABØ DF407FRAØØ DF407FRØØØ DF44FRABØ DF44FRAØØ DF44FRØØØ DF46FRABØ DF46FRAØØ DF46FRØØØ DF4304FRABØ DF4304FRAØØ DF4304FRØØØ DF4307FRABØ DF4307FRAØØ DF4307FRØØØ DF436FRABØ DF436FRAØØ DF436FRØØØ DF4404FRABØ DF4404FRAØØ DF4404FRØØØ DF4407FRABØ DF4407FRAØØ DF4407FRØØØ DF444FRABØ DF444FRAØØ DF444FRØØØ DF446FRABØ DF446FRAØØ xdf446frøøø DF44FRABØ DF44FRAØØ DF44FRØØØ DF4504FRABØ DF4504FRAØØ DF4504FRØØØ DF454FRABØ DF454FRAØØ DF454FRØØØ DF456FRABØ DF456FRAØØ DF456FRØØØ DF45FRABØ DF45FRAØØ DF45FRØØØ H-39

35 Maxard Interconnection Systems 400 Amp * otes to Catalog umbers Control Contacts (position ) use K example: DBRF40400K0 Shunt Trip Breaker (position 3) add Z to above: DBRF40400KZ Breaker Trip Ratings (positions 9, 0, ) 50 amp use amp use amp use amp use 400 on-auto Sw. AO (repl. DBRF with DSRF ) Conduit Hubs: EMA 4X Std. 4" PT-thread outlet at B (or E) 400 amp Max. 4" (0mm) B - std. Boldface figures are for voltage assignment. For different ratings, see page H-340. Device Ratings and Polarizations Maximum 600VAC or 50VDC (For full polarization, see page H-340) E Interlocked Receptacle with Circuit Breaker EMA 4X 9 6" 30 " 9" 6" 3" 5 " " Pole Wire Conductor Placement 60 hz CAT. O. * 77 DBRF4044ØØØ 5 DBRF4074ØØØ 480 DBRF4044ØØØ 50 DBRF4074ØØØ 600 DBRF444ØØØ 08 DBRF464ØØØ 77/480 DBRF43044ØØØ 3 4 5/50 DBRF43074ØØØ 0/08 DBRF4364ØØØ 3Ø 480 DBRF44044ØØØ 3Ø 50 DBRF44074ØØØ 3 4 3Ø 600 DBRF4444ØØØ 3Ø 08 DBRF4464ØØØ 3Ø 440 DBRF444ØØØ 3ØY 5/50 DBRF45044ØØØ 3ØY 347/600 DBRF4544ØØØ 4 5 3ØY 0/08 DBRF4564ØØØ 3ØY 50/440 DBRF454ØØØ H-330

36 Maxard Interconnection Systems Shore-to-ship power Application: Shore power to marine vessels sightseeing boats When docked, marine vessels need shore power when their engines aren t running. Dockside designs need to be as safe as possible during heavy use, rough treatment and adverse weather conditions. High amperage-rated systems are installed using parallel power delivery with cross-network protection. Installation: 400-amp male inlets and power connectors with control contacts Watertight devices are necessary for dockside installations. Maxard connections go further with O-rings on both pins and interiors for environmental separation and true waterproof performance. The male inlet center ground pin feature and keyed entry design align easily, make ground first and break last, while quarter-turn insertion delayed-action removal and locking screw collars provide accidental pull-out protection. Upon connector insertion, two auxiliary control contacts complete a contactor circuit, which powers the line through a make-last-and-break-first configuration. Contactors are installed separately in an on-shore sheltered power distribution panel. This can be wired for each contactor or for multiple connections; if one plug is removed, power is cut off. solution 400 Amp H-33

37 Maxard Interconnection Systems 400 Amp Reverse Service ** If receptacle is desired with a Straight Adapter instead of standard Angle Adapter, substitute S for the A in the catalog number of the Receptacle with Angle Adapter or Adapter and Box. Standard cable bushings shown; see page H-334 for other sizes available at no extra cost if specified on order. Always furnished with screw collar. We recommend cup cap with male plug; order catalog number DS4CC. Maximum lug wire 500 kcmil 37-strand or flexible, cable entrance.937" diameter. Receptacles furnished with flap cap also have screw thread to accept male collar on plug. Catalog numbers shown are for flap cap receptacles; change DF to DS for ordering screw cap. Boldface figures are for voltage assignment. For different ratings, see page H-340. B Outlet furnished at location B unless otherwise specified. 4" PT. A C t Control contacts for plug/receptacles: Use K where noted. Ex: DS404MR00K D For Adapters, Junction Boxes and Accessories, see pages H-334 H-337. Device Ratings and Polarizations Maximum 600VAC or 50VDC (For full polarization, see page H-340) Female Connector 0 3 4" 9 8" Male Plug 3 5 8" 7 5 8" Conductor Standard Pole Wire Placement 60 hz CAT. O. Bushing I.D. CAT. O. t t 77 DF404FPØØØ DS404MPØØØ 5 DF407FPØØØ DS407MPØØØ 480 DF404FPØØØ DS404MPØØØ 4" 50 DF407FPØØØ DS407MPØØØ 600 DF44FPØØØ DS44MPØØØ 08 DF46FPØØØ DS46MPØØØ 77/480 DF4304FPØØØ DS4304MPØØØ 3 4 5/50 DF4307FPØØØ DS4307MPØØØ 0/08 DF436FPØØØ DS436MPØØØ 3Ø 480 DF4404FPØØØ DS4404MPØØØ 3" 3Ø 50 DF4407FPØØØ DS4407MPØØØ 3 4 3Ø 600 DF444FPØØØ DS444MPØØØ 3Ø 08 DF446FPØØØ DS446MPØØØ 3Ø 440 DF44FPØØØ DS44MPØØØ 3ØY 77/480 DF4504FPØØØ DS4504MPØØØ 4 5 3ØY 347/600 DF454FPØØØ DS454MPØØØ 3 4" 3ØY 0/08 DF456FPØØØ DS456MPØØØ 3ØY 50/440 DF45FPØØØ DS45MPØØØ Standard Bushing I.D. 4" 3" 3 4" H-33

38 Maxard Interconnection Systems 4" Male Inlet with Angle Adapter** and Junction Box 6 5 8" 5 " 4" Male Inlet with Angle Adapter** 3 " Male Inlet 4" 3 " 9 4" CAT. O. CAT. O. CAT. O. t t t DS404MRABØ DS404MRAØØ DS404MRØØØ DS407MRABØ DS407MRAØØ DS407MRØØØ DS404MRABØ DS404MRAØØ DS404MRØØØ DS407MRABØ DS407MRAØØ DS407MRØØØ DS44MRABØ DS44MRAØØ DS44MRØØØ DS46MRABØ DS46MRAØØ DS46MRØØØ DS4304MRABØ DS4304MRAØØ DS4304MRØØØ DS4307MRABØ DS4307MRAØØ DS4307MRØØØ DS436MRABØ DS436MRAØØ DS436MRØØØ DS4404MRABØ DS4404MRAØØ DS4404MRØØØ DS4407MRABØ DS4407MRAØØ DS4407MRØØØ DS444MRABØ DS444MRAØØ DS444MRØØØ DS446MRABØ DS446MRAØØ DS446MRØØØ DS44MRABØ DS44MRAØØ DS44MRØØØ DS4504MRABØ DS4504MRAØØ DS4504MRØØØ DS454MRABØ DS454MRAØØ DS454MRØØØ DS456MRABØ DS456MRAØØ DS456MRØØØ DS45MRABØ DS45MRAØØ DS45MRØØØ H-333

39 Maxard Interconnection Systems Cable Bushings for Maxard Plugs and Connectors To order non-standard bushing, add cable bushing number to the end of a catalog number. The bushing is furnished at no additional cost at time of order. Ex: DF504FP000/DF03. Shaded areas show Cable Bushings provided with a strain-relief neck; larger bushings are collar style. Hole Diameter for Cable Size 3 30 Amp Size 6 60 Amp Size o. 3 and 6 (Identification Letter Inside Hole) Size 0 00 Amp Size 0 00 Amp Size o. 0, 0 and 40 Size Amp.65" J63.750" J64 J04.875" J65 Std. P3W J05.000" J66 Std. P3W J06 DF00 DF00.88" J67 Std. 3P4W J07 Std. P3W DF0 DF0.33" J08 Std. 3P4W DF04 DF04.375" J69.500" J60 J00 Std. 4P5W DF06 DF06.65".688" J0 DF07 Std. P3W DF07.83" DF09 Std. 3P4W DF09.875" J03 DF030 DF03 Std. P3W.000" DF03 Std. 4P5W.5" DF034 Std. 3P4W.50" DF036 Std. 4P5W.500" DF040.65" DF " DF " DF4048 Std. 3P4W 3.50" DF4054 Std. 4P5W Standard Cable Bushings otes: When ordering, select bushing size slightly larger than your cable O.D. for best fit. Material eoprene H-334

40 Maxard Interconnection Systems Adapters for Conduit and Fittings Adapters are tapped PT standard pipe thread to accommodate rigid conduit or standard connectors for armored and non-metallic cable or flexible conduit. 30 Amp Cat. o. Tapped Hole Size PT 60 Amp Cat. o. Replacement Flap Covers and Screw Covers For connectors, receptacles and interlocks Tapped Hole Size PT 00 Amp Cat. o. Tapped Hole Size PT 00 Amp Cat. o. JPA Conduit Adapters Tapped Hole Size PT 400 Amp Cat. o. Tapped Hole Size PT JPA6 4" JPA04 4" DFA4 4" DFA5 " DFA46 " JPA63 " JPA05 " DFA5 " DFA6 " DFA47 " JPA64 4" JPA 06 " DFA6 " DFA7 " DFA48 3" JPA65 " ote: Material cast aluminum, corrosion-resistant copper-free alloy, electrostatic epoxy coated. Furnished complete with gasket and screws. To specify standard plugs or connectors equipped with one of the above adapters, add the catalog number of the adapter selected to the catalog number of the plug or connector. Complete list price is the list price of the device plus list price of the adapter. Ex.: Cat. o. DS307MP000 with adapter tapped " would be Cat. o. DS307MP000/JPA63. Cat. o. Description Amperage DFC3 30 DFC6 60 Flap Cover Assembly DFC0 00 (Weathertight) DFC0 00 DFC DSC3 30 DSC6 Screw Cap and STS 60 DSC0 Lanyard Assembly 00 DSC0 (Watertight) 00 DSC DFC6 DSC6 H-335

41 Maxard Interconnection Systems Accessories for Receptacles Description Cup Caps For watertight plugs/inlets. Cup caps are used where portable equipment is on a standby basis and plugs are not in use. Effectively protect insulation and contacts from excessive moisture, dirt, dust and corrosion. Material Cast aluminum, corrosion-resistant copper-free alloy, electrostatic epoxy coated with steel braid cable attached. Adapter Flush Frames Single ang Provide suitable means for mounting box covers of junction box receptacles flush in a wall. 30 Amp Cat. o. 60 Amp Cat. o. 00 Amp Cat. o. 00 Amp Cat. o. 400 Amp Cat. o. DS3CC DS6CC DSCC DSCC DS4CC JFA6 JFA0 JFA0 JFA0 Consult Factory Adapters for Conduit Box Receptacles Adapters to fit existing boxes and for special mounting requirements can also be furnished. Consult your Thomas & Betts representative. 0 Vertical Angle Adapter JAA6-AB6 JAA0 DAA0 DAA0 30 Vertical Angle Adapter DAA40 45 Vertical Angle Adapter JAA6-45 JAA0-45 Straight Adapter JRA6-AB6 JRA0 DRA0 DRA0 DRA40 Junction Box Single ang JB6- JB0-B50 JB0-B00 DJB0 DJB40 Angle Enclosure JE6 JE0 JE0M MACK Adapter Plates Enables mounting of Maxard receptacles to competitive existing back boxes. This involves removing the existing non-hazardous location receptacle from back box, inserting adapter plate and installing Maxard receptacle. Adapter plates are available for competitors boxes including Hubbel, Killark, Appleton and Crouse-Hinds. DCCA3 DCCA6 DCCA0 DCCA0 Russellstoll Adapter Plates Adapt Maxard receptacles to existing J-Line, Angle Type and Heavy-Service Ever-Lok back boxes. DRCA3 DRCA6 DRCA0 /A H-336

42 Maxard Interconnection Systems Replacement Interiors for Receptacles, Connectors, Plugs and Male Inlets Rating Polarization Corresponding Male Interior Assembly Corresponding Female Interior Assembly Plug/Inlet Male Interior Connector/Receptacle Female Interior P3W 5VAC DS307MP000 DFPU307 DF307FP000 DFRU307 P3W 50VAC DS307MP000 DFPU307 DF307FP000 DFRU307 30A 3P4W 5/50VAC DS3307MP000 DFPU3307 DF3307FP000 DFRU3307 3P4W 3-ph 480VAC DS3404MP000 DFPU3404 DF3404FP000 DFRU3404 4P5W 77/480VAC DS3504MP000 DFPU3504 DF3504FP000 DFRU3504 P3W 50VAC DS607MP000 DFPU607 DF607FP000 DFRU607 3P4W 5/50VAC DS6307MP000 DFPU6307 DF6307FP000 DFRU A 3P4W 3-ph 480VAC DS6404MP000 DFPU6404 DF6404FP000 DFRU6404 4P5W 77/480VAC DS6504MP000 DFPU6504 DF6504FP000 DFRU6504 P3W 50VAC DS07MP000 DFPU07 DF07FP000 DFRU07 3P4W 5/50VAC DS307MP000 DFPU307 DF307FP000 DFRU307 00A 3P4W 3-ph 480VAC DS404MP000 DFPU404 DF404FP000 DFRU404 4P5W 77/480VAC DS504MP000 DFPU504 DF504FP000 DFRU504 3P4W 77/480VAC DS304MP000 DFPU304 DF304FP000 DFRU304 00A 3P4W 3-ph 480VAC DS404MP000 DFPU404 DF404FP000 DFRU404 4P5W 77/480VAC DS504MP000 DFPU504 DF504FP000 DFRU504 3P4W 77/480VAC DS4304MP000 DFPU4304 DF4304FP000 DFRU A 3P4W 3-ph 480VAC DS4404MP000 DFPU4404 DF4404FP000 DFRU4404 4P5W 77/480VAC DS4504MP000 DFPU4504 DF4504FP000 DFRU4504 ote: For other interiors not shown, use same polarization index as plug, connector, etc. Ex: DS646MP000 plug uses DFPU646 interior. Accessories for Interlocked EMA /3R Receptacles Description 30 Amp Cat. o. 60 Amp Cat. o. 00 Amp Cat. o. 00 Amp Cat. o. Fused Disconnect Interlocked Receptacle with Safety Switch 30 00A O C Contact F34757 F34757 F34757 /A /A O C Contact F34758 F34756B /A /A /A Copper Body Lugs 6 lugs per kit F34756A F34756B F34756C /A /A Type R Fuse Clips 3 per kit F34755A F34755B F34755C /A /A eutral Block F34754A F34754B F34754B /A /A 400 Amp Cat. o. H-337