Setting up the communication between a Total Station and SiteMaster range of products
|
|
- Marilyn Barker
- 5 years ago
- Views:
Transcription
1 Setting up the communication between a Total Station and SiteMaster range of products Before we set up the communication, one important thing to know.. Please NOTE that to check any setup and take measurements with the Total Station in the SiteMaster software, YOU MUST add a STATION into your drawing. To do this, once communication has been established. Go into the Station Manager and ADD a NEW STATION station (after typing a Station No. in the top dialogue) Once done you will be able to go into the DRAW module and use the Icon to take measurements.
2 OK SETTING UP COMMUNICATION BETWEEN THE Total Station and Sitemaster Using Bluetooth We have 3 things to setup here 1. We must set the Total Station in Bluetooth mode 2. We must have the Bluetooth switched ON on the PC/PDA 3. We must use the Search for Bluetooth.. option in SiteMaster (note that this option will not appear if your Bluetooth is not switched on on your PC/PDA) If everything is set OK you will see Connected to Leica etc at the bottom of the dialogue. If everything is set OK you can proceed to adding a Station. (see page 1) If everything is not OK you may need to check the Communication Parameters using the Settings button.see below. Either way, please note that the default setting on the Total Station may be to use the PRISM. Please see below for how to switch between using the Prism and NOT using the Prism (using the laser) see end of this document. Using Serial Cable We have to setup. 1. Connect the cable between Total Station and device running SiteMaster 2. Set the data output on the Total Station see below 3. In SiteMaster set the Device Type, Port No, and check that the parameters match in the software and on the Total Station.
3 To use Bluetooth on the Total Station, you must tell it you want to use it. To do this you have to go into CONFIG > DATA OUTPUT and set BLUETOOTH SEE BELOW FOR SETTINGS If you want to use a serial cable, set the RS232 option for Data Output If you want to use Bluetooth set the Bluetooth option for Data Output (note when using Bluetooth, if it asks for a password code the default is 0000 (four zeros) Note that Endmark by default on the Serial option is CR/LF so presumably this is what needs to be set on the Bluetooth as well.
4 Setting up communications in SiteMaster. Using Bluetooth, select the Search for Bluetooth option. If using Serial connection select the Serial Connection and then the Settings (If checking the Bluetooth settings select Settings ) Note that with Leica s there are 2 protocols that can be used GSI and GEO, check you manual for the relevant setting. With some devices it may be necessary to check the Com port setting that the Bluetooth/Serial port is using and parameters..this can be done in Start > Control Panel > System > Hardware > Device Manager > Ports (COM & LPT). In SiteMaster set the port number as per below. (note that your settings may be different to what is documented below so check YOUR settings) Click the DETAILS.. button to access further settings, set them the same as the parameters set on the Total Station
5 SEE BELOW FOR SETTINGS If you want to use a serial cable, set the RS232 option for Data Output If you want to use Bluetooth set the Bluetooth option for Data Output (note when using Bluetooth, if it asks for a password code the default is 0000 (four zeros) Note that Endmark by default on the Serial option is CR/LF so presumably this is what needs to be set on the Bluetooth as well. Once the Parameters are set the same the only thing that may still be wrong is the COM Port notice above that I have 2.try one first then the other if no communication is made (if your not sure about the GSI / GEO bit repeat on each setting).
6 Once settings are correct, you should see Connected to Leica.etc at the bottom of the dialogue box below And you can then click the OK button To proceed into the software. Again.you must add a Station into The drawing before taking any Measurements Please refer to the first page of this Document for how to do this.
7 Switching between Prism and Laser (none prism) on the Leica 400 and 500 series. By default the Leica range of Builders default setting is to use the Reflector. One of the main things you will have to do on the Total Station is to switch between using the reflector and using the laser (this allows you to measure to any point that is not the reflector on a wall for instance). To switch modes, do a long press on the button indicated below (f) the indicator (g) will be red if you are set on the laser and white if you are set on the reflector.
8 Switching between Prism and Laser (none prism) on the Leica 100, 200 and 300 series. By default the Leica range of Builders default setting is to use the Reflector. One of the main things you will have to do on the Total Station is to switch between using the reflector and using the laser (thia allows you to measure to any point that is not the reflector on a wall for instance). To switch modes, do a long press on the button indicated below (f) the indicator (g) will be red if you are set on the laser and white if you are set on the reflector.
RF Solution for LED Display Screen
RF Solution for LED Display Screen Introduction RF is a kind of wireless telecommunication technology, now standard IEEE802.11B is much popular. Communication speed between server and terminal can reach
More informationQuick Guide Book of Sending and receiving card
Quick Guide Book of Sending and receiving card ----take K10 card for example 1 Hardware connection diagram Here take one module (32x16 pixels), 1 piece of K10 card, HUB75 for example, please refer to the
More informationTALOS ITR-T250. TALOS ITR-T250 Driver Setup Guide (V1.0) on the disk sent with the printer. Follow the steps (see the picture):
TALOS ITR-T250 Driver Setup Guide (V1.0) Run the on the disk sent with the printer. Follow the steps (see the picture): Then click Next (see the following picture). 1 Choose I accept the agreement, (see
More information1 Synchronising Xsens with the Delsys Trigno EMG System
1 Synchronising Xsens with the Delsys Trigno EMG System The steps described below show how to configure Xsens systems to control start and stop of a recording of the Delsys Trigno EMG system, and how to
More informationSolutions for a Real Time World. Unigen Corp. Wireless Module Products. PAN Radio Modules Demonstration & Evaluation Kit UGWxxxxxxxxx (Part Number)
Unigen Corp. Wireless Module Products PAN Radio Modules Demonstration & Evaluation Kit UGWxxxxxxxxx (Part Number) Issue Date: November 19, 2008 Revision: 1.0-1 REVISION HISTORY Rev. No. History Issue Date
More informationWelch Allyn CardioPerfect Workstation Tango+ Interface Notes
Welch Allyn CardioPerfect Workstation Tango+ Interface Notes To setup Tango+ with the CardioPerfect stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables RS-232
More informationEdgeConnect Module Quick Start Guide ITERIS INNOVATION FOR BETTER MOBILITY
EdgeConnect Module Quick Start Guide ITERIS INNOVATION FOR BETTER MOBILITY 493456301 Rev B April 2009 Table of Contents Installation... 1 Setup... 2 Operation... 4 Live Video... 4 Video Settings... 5 Network
More informationInstallation / Set-up of Autoread Camera System to DS1000/DS1200 Inserters
Installation / Set-up of Autoread Camera System to DS1000/DS1200 Inserters Written By: Colin Langridge Issue: Draft Date: 03 rd July 2008 1 Date: 29 th July 2008 2 Date: 20 th August 2008 3 Date: 02 nd
More informationIxStream Headend. Quick Guide - Begin working with the IxStream headend. IX-Streamer, rev 1.1
IxStream Headend Quick Guide - Begin working with the IxStream headend IX-Streamer, rev 1.1 Introduction... 3 Example setup... 3 Access the headend... 4 Important Concepts... 5 Push Config... 5 EMM...
More informationJAMAR TRAX RD Detector Package Power Requirements Installation Setting Up The Unit
JAMAR TRAX RD The TRAX RD is an automatic traffic recorder designed and built by JAMAR Technologies, Inc. Since the unit is a Raw Data unit, it records a time stamp of every sensor hit that occurs during
More informationRADIO FREQUENCY SYSTEMS
RADIO FREQUENCY SYSTEMS Optimizer RT FAQ s Q. What information is require before running the software? The Serial Number of each ACU MUST be recorded with the Model number of the antenna that it is attached
More informationAuxiliary states devices
22 Auxiliary states devices When sampling using multiple frame states, Signal can control external devices such as stimulators in addition to switching the 1401 outputs. This is achieved by using auxiliary
More informationHD4112 Quad HDMI MPEG2 HD DVBT Encoder Modulator U S E R M A N U A L
HD4112 Quad HDMI MPEG2 HD DVBT Encoder Modulator U S E R M A N U A L HD4112 Manual Rev 1 Contents 1. GENERAL 1.1 Description 1.2 Specifications 2. INSTALLATION 2.1 What s in the Box 2.2 Connection 2.2.1
More informationFirst Time Setup Guide
First Time Setup Guide www.exhibio.com 1.877.EXHIBIO (394.4246) Exhibio ST-200 Components & Accessories Standing Mount TV Tuner with Input Cable (USB 2.0 only) VESA Mount Over-the-Air Antenna Power Adapter
More informationInterface sheet - Korr Cardio Coach Monitor - CPET Ergometer
Interface sheet - Korr Cardio Coach Monitor - CPET Ergometer Service documentation Lode BV Zernikepark 16 NL 9747 AN Groningen The Netherlands t: +31 50 571 28 11 f: +31 50 571 67 46 @: ask@lode.nl www.lode.nl
More informationGuide For Setting Up Your Fortec Lifetime Ultra Receiver
Guide For Setting Up Your Fortec Lifetime Ultra Receiver Setting up your receiver can be tricky. This document will assist in the process of getting you up and running with minimal effort. Back of the
More informationGWL/ Power Group Technology Solutions Stay Powered for the Future
GWL/ Power Group Technology Solutions Stay Powered for the Future BMS2405 CONNECTION GUIDE: This is simple step-by-step manual how to CONNECT AND proceed basic SETUP of BMS2405. In following example connection
More informationLogic Controls LV3000 VGA Connected Virtual Pole Display
One Blue Hill Plaza, 16 th Floor, PO Box 1546 Pearl River, NY 10965 1-800-PC-AMERICA, 1-800-722-6374 (Voice) 845-920-0800 (Fax) 845-920-0880 Logic Controls LV3000 VGA Connected Virtual Pole Display This
More informationFiber Optic Extender User Manual. Model: CV-F01-TX
Fiber Optic Extender User Manual Model: CV-F01-TX 1. I/O Connectors Figure 1 CV-F01-TX Fiber Optic Transmitter I/O Connectors 2. Connection introduction Figure 2 CV-F01-TX Fiber Optic Transmitter Connection
More informationHD-1603 Single Input MPEG-4 DVB-T HD Encoder/Modulator User Guide and Install Manual
ZyCastR digi-mod HD Range digi-mod HD-1603 www.digi-modbyzycast.com HD-1603 Single Input MPEG-4 DVB-T HD Encoder/Modulator User Guide and Install Manual Table of Contents www.digi-modbyzycast.com Safety
More informationInterface sheet - Edan ST-1212 Stress - CPET ergometer
Interface sheet - Edan ST-1212 Stress - CPET ergometer Service documentation Lode BV Zernikepark 16 NL 9747 AN Groningen The Netherlands t: +31 50 571 28 11 f: +31 50 571 67 46 @: ask@lode.nl www.lode.nl
More informationSyntor X Flash Memory Module Revision C
Syntor X Flash Memory Module Revision C The PIEXX SynXFlash memory module, along with the supplied PC software, replaces the original SyntorX code plugs and allows you to easily set modify and update your
More informationHD168Bi Quad CVBS/HDMI HD DVBT Encoder Modulator U S E R M A N U A L
HD168Bi Quad CVBS/HDMI HD DVBT Encoder Modulator U S E R M A N U A L Contents 1. GENERAL 1.1 Description 1.2 Specifications 2. INSTALLATION 2.1 What s in the Box 2.2 Connection 2.2.1 DEVICE Programming
More informationInterface sheet - Nihon Kohden 1550K - CPET Treadmill
Interface sheet - Nihon Kohden 1550K - CPET Treadmill Service documentation Lode BV Zernikepark 16 NL 9747 AN Groningen The Netherlands t: +31 50 571 28 11 f: +31 50 571 67 46 @: ask@lode.nl www.lode.nl
More informationHD-1600 Single Input MPEG-4 DVB-T HD Encoder/Modulator User Guide and Install Manual
digi-mod HD Range digi-mod HD-1600 www.resi-linx.com HD-1600 Single Input MPEG-4 DVB-T HD Encoder/Modulator User Guide and Install Manual Table of Contents Safety Precautions 2 Package Contents 2 Product
More informationTVS-2-TAIT VPU-15-TAIT
TVS-2-TAIT High Level Rolling Code Scrambler for the Tait Orca & TM-8000 Radios VPU-15-TAIT Voice Inversion Scrambler for the Tait Orca & TM-8000 Radios Manual Revision: 2018-03-05 Rev B Covers Software
More informationOPERATORS & INSTALLATION MANUAL JOTRON AIS VIEWER WINDOWS PC SOFTWARE
OPERATORS & INSTALLATION MANUAL JOTRON AIS VIEWER WINDOWS PC SOFTWARE AMENDMENT RECORD AMENDMENT NO. INCORP. BY DATE PAGE(S) VERSION CHANGE NOTE ( EM) 1 ES 06.10.2004 29 A 2 ES 04.03.2005 29 B Included
More informationC Module Description
ASI Distribution Amplifier with Signal Inversion C Module Description The is an ASI distribution amplifier with up to 8 outputs in double width or 4 outputs in single width. The input is transformer coupled
More informationInstruction for Locking Tuner s Carriage(s) before Shipping
Instruction for Locking Tuner s Carriage(s) before Shipping Step 1. Configure tuner properties and verify connection From ATS block diagram view, double click on the tuner that needs to be locked. The
More informationAurora Grid-Tie Installation Instructions (Model Number: PVI-3.0-OUTD-US-W) Revision 4.1
Aurora Grid-Tie Installation Instructions (Model Number: PVI-3.0-OUTD-US-W) Revision 4.1 Contents 1) Grid-Tie Installation Block Diagram... 3 2) Installation Steps.... 4 2.1) Initial Setup.... 4 2.1.1)
More informationUser Manual for ICP DAS WISE Monitoring IoT Kit -Microsoft Azure IoT Starter Kit-
User Manual for ICP DAS WISE Monitoring IoT Kit -Microsoft Azure IoT Starter Kit- [Version 1.0.2] Warning ICP DAS Inc., LTD. assumes no liability for damages consequent to the use of this product. ICP
More informationRDS: The RDS, or Radio Data System, is supported in the g! interface where available.
Manufacturer: Integra Integration Note Model Number(s): Integra 20.3/30.3/40.3/50.3/70.3/80.3 Core Module Version: 5.4 Comments: FW 1.09 (1091-0999-0210-9105) Document Revision Date: 1/15/2013 OVERVIEW
More informationCable Calibration Function for the 2400B/C and 2500A/B Series Microwave Signal Generators. Technical Brief
Cable Calibration Function for the 2400B/C and 2500A/B Series Microwave Signal Generators Technical Brief Quickly and easily apply a level correction table to compensate for external losses or power variations
More informationThe Playful Invention Company. PicoCricket Troubleshooting. Version 1.2a
The Playful Invention Company PicoCricket Troubleshooting Version 1.2a PicoCricket Troubleshooting For the latest troubleshooting hints, see www.picocricket.com/troubleshooting Can t find the Beamer Solutions
More informationVIDEO ALARM VERIFICATION UNIT VIVER
VIDEO ALARM VERIFICATION UNIT VIVER viver_en 09/08 The VIVER module provides remote video alarm verification, based on image sequences transmitted from cameras installed in the protected facility. The
More informationProcedures to Characterize Maury s Automatic Tuner Using ATS Software Version 5.1 or above
Procedures to Characterize Maury s Automatic Tuner Using ATS Software Version 5.1 or above Things to check before tuner characterization Make sure tuner is power up and USB cable is connected to the computer
More informationYellow Frog. Manual Version 1.1
Yellow Frog Manual Version 1.1 1 YellowFrog Contents PC Requirements...... 2 YellowFrog Power Meter Measurement.... 3 YellowFrog PC Software..... 3 Main Screen....... 4 Input Overload....... 5 Battery
More informationArtistic Licence Engineering Ltd Firmware Version V3.03 Manual Revision V1-9
Light-Switch & Switch-Edit Artistic Licence Engineering Ltd Firmware Version V3.03 Manual Revision V1-9 Artistic Licence Engineering Ltd. Switch-Edit Manual 2/47 Artistic Licence Engineering Ltd. Switch-Edit
More informationConnecting To and Programming the LPC2148 Blue Board. Method 1 ISP (In-System Programming) w/ Flash Magic
Connecting To and Programming the LPC2148 Blue Board We have two primary methods of programming the LPC2148 Blue Board. We can use the supplied bootloader with ISP (In-System Programming) or JTAG (better
More informationPalette Master Color Management Software
Palette Master Color Management Software How to Use Guide 01 Proprietary Calibration Software Co-developed with leading color calibration experts X-Rite, Palette Master software simplifies calibration
More informationSky HD+ / Sky Q Module
Sky HD+ / Sky Q Module Installation and Usage Guide Revision: Date: Author(s): 20171106 Saturday, November 11, 2017 Richard Mullins Page 1 Contents Overview 2 Changelog 2 Installation 3 1. Import the TCM
More informationScan Converter Quick Installation Guide
Scan Converter Quick Installation Guide Software Note: No software is required to use your scan converter. Please complete the hardware installation and system setup before you determine the need to the
More informationHITS QT/QT+ Setup Instructions for QSD/QHD Services using: Drake SCT2x4 Headend Transcoder 2 Satellites/4 Multiplexes
HITS QT/QT+ Setup Instructions for QSD/QHD Services using: Drake SCT2x4 Headend Transcoder 2 Satellites/4 Multiplexes Drake Transcoder Front /Rear View Setup and Programming Instructions: Input Setup Below
More informationTeacher s AIDE Training System. EZ Teach Silver Installation
Teacher s AIDE Training System EZ Teach Silver Installation A front row seat for every Student in your class! Page 1 of 17 TRODUCTION...3 EZ TEACH SILVER STALLATION 5 EASY STEPS...3 EZ Teach Components...3
More informationMortara X-Scribe Tango+ Interface Notes
Mortara X-Scribe Tango+ Interface Notes To setup Tango+ with the X-Scribe stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables RS-232 Cable used to communicate
More informationConfiguration Nordex CC
Configuration Nordex CC Table of contents 1. Introduction... 3 2. Nordex CC Controller... 4 3. Mitsubishi A1SJ71QC24 communication module... 5 4. Mitsubishi A1SJ71UC24-R4-S2 communication module... 6 5.
More informationNarrow-Band Emergency Message System (EBEMS) - MT-63 Operating Instructions
Narrow-Band Emergency Message System (EBEMS) - MT-63 Operating Instructions Dr. John A. Allocca, WB2LUA www.wb2lua.com 12/16/14 Narrow Band Emergency Messaging Software (NBEMS) is a system that allows
More informationAudio Design Associates (ADA)
Manufacturer: Audio Design Associates (ADA) Integration Note Model Number(s): Tune Suite (Quadritune) Core Module Version: Comments: Quadritune v2.2, TFM-1 v2.1, HDM-1 v3.2, XM v2.01, Sirius v1.0 Document
More informationProjection Display. Serial Interface Specification
Projection Display Serial Interface Specification Version: 2.0 Projection Display Serial Interface Spec. 1/1 Table of Contents 1. RS232 SETTING...3 2. CONTROL COMMAND STRUCTURE...3 3. CONTROL SEQUENCE...3
More informationJ.M. Stewart Corporation 2201 Cantu Ct., Suite 218 Sarasota, FL Stewartsigns.com
DataMax INDOOR LED MESSAGE CENTER OWNER S MANUAL QUICK START J.M. Stewart Corporation 2201 Cantu Ct., Suite 218 Sarasota, FL 34232 800-237-3928 Stewartsigns.com J.M. Stewart Corporation Indoor LED Message
More informationC Module Description
IQMMX -Input Router & ASI Distribution Amplifier C Module Description The IQMMX is an ASI to 1 switch, distribution amplifier and transport stream switcher with up to 8 outputs in double width form or
More informationEncoder Modulator. IPTV Setup
Encoder Modulator IPTV Setup INTRO Thor Broadcast ships from our facility in Los Angeles with a preloaded NMS GUI firmware Generally the IP address will be 192.168.0.136 ; this goes into any internet browser
More informationPLASMA MONITOR (PT20 UVVis) USER GUIDE
Thin Film Measurement solution Software, sensors, custom development and integration PLASMA MONITOR (PT20 UVVis) USER GUIDE August 2012 Plasma monitor with VFT probe. INTRODUCTION Plasma Monitor includes
More informationYAMAHA 03D SERIAL AUDIO MIXER
TECH NOTE Fastrack VS Verion 1.0 and later YAMAHA 03D SERIAL AUDIO MIXER The Fastrack VS hybrid editing system interfaces to the 03D Serial Audio Mixer with a 6-pin DIN to 9-pin RS-422 serial control cable
More informationLibrary ebooks and Your Sony ereader
Library ebooks and Your Sony ereader When using your Sony ereader for the first time to obtain library ebooks and audiobooks, download the Overdrive Media Console, Adobe Digital Editions, and the Sony
More informationCOPYRIGHT NOVEMBER-1998
Application Notes: Interfacing AG-132 GPS with G-858 Magnetometer 25430-AM Rev.A Operation Manual COPYRIGHT NOVEMBER-1998 GEOMETRICS, INC. 2190 Fortune Drive, San Jose, Ca 95131 USA Phone: (408) 954-0522
More informationAny feature not specifically noted as supported is not supported.
Manufacturer: ELAN Integration Note Model Number(s): EL-4KM-VW44 (Device Ver 2.20; Web Module Ver 6.23) Minimum Core Module Version: Document Revision Date: 8.1.395 5/11/2017 OVERVIEW AND SUPPORTED FEATURES
More informationKARIN Operator manual WinKARIN 3.X
HIRSCHMANN Rheinmetall Elektronik KARIN Operator manual WinKARIN 3.X Print: 3.0/98 01/BN_1405E Contents Contents Introduction 1-1 General notes................................................... 1-2 Technical
More informationIntegration Note. Manufacturer: OVERVIEW AND SUPPORTED FEATURES
Manufacturer: Model Number(s): Minimum Core Module Version: Document Revision Date: Denon Integration Note AVR-2805, 3805, 1613, 1713, 1912CI, 1913, 2112CI, 2113CI, 2310CI, 2311CI, 2312CI, 2313CI, 2808CI,
More informationUniversal DiSEqC controller USER MANUAL
Universal USER MANUAL SAT CONTROL 1. INTRODUCTION Satellite television is one of most favourite and popular medium in today s world. But reception 36.000 km away from the sky is more technically difficult.
More informationUniversal DiSEqC controller USER MANUAL SAT CONTROL
USER MANUAL SAT CONTROL SAT CONTROL Dear customer, If you have not been able to put the system into operation or have problems installing it, call the Technical Assistance phone as indicated on the first
More informationDVB-T USB SET-TOP BOX
DVB-T USB SET-TOP BOX User Manual Version: 1.0 (February 2005) TRANSYSTEM INC. No.1-2 Li-Hsin Rd.I Science-Based Industrial Park, Hsinchu, Taiwan Tel:+886-3-5780393 Fax:+886-3-5784111 e-mail: sales@transystem.com.tw
More information1 OVERVIEW 2 WHAT IS THE CORRECT TIME ANYWAY? Application Note 3 Transmitting Time of Day using XDS Packets 2.1 UTC AND TIMEZONES
1 OVERVIEW This application note describes how to properly encode Time of Day information using EIA-608-B Extended Data Services (XDS) packets. In the United States, the Public Broadcasting System (PBS)
More informationUser Guide Mix-iT.ATEM v2.0. September User Guide Mix-iT for ATEM v2.0
User Guide Mix-iT.ATEM v2.0 September 2015-1- Declaration of Conformity We, manufacturer/representative ArtiVisuals Molukkenstraat 200 S3 1098 TW Amsterdam The Netherlands declare under our sole responsibility,
More informationMy XDS Receiver- Affiliate Scheduler
My XDS Receiver- Affiliate Scheduler The XDS distribution system represents a marked departure from the architecture and feature set of previous generations of satellite receivers. Unlike its predecessors,
More informationEEG A1452 SCTE-104 Inserter Frame Card
EEG A1452 SCTE-104 Inserter Frame Card Product Manual EEG Enterprises, Inc. 586 Main Street Farmingdale, New York 11735 TEL: (516) 293-7472 FAX: (516) 293-7417 Copyright EEG Enterprises, Inc. 2017 All
More informationSXGA096 DESIGN REFERENCE BOARD
SXGA096 DESIGN REFERENCE BOARD For Use with all emagin SXGA096 OLED Microdisplays USER S MANUAL VERSION 1.0 TABLE OF CONTENTS D01-501152-01 SXGA096 Design Reference Board User s Manual i 1. INTRODUCTION...
More informationUser Manual. Product Link:
User Manual Product Name: "AVR JTAG ICE Emulator" Product Model: PRG-00025 Product Link: https://techshopbd.com/product-categories/avr-98764/3189/avr-jtag-ice-emulatortechshop-bangladesh Note: This AVR
More informationDouglas Lighting Controls Bluetooth Commissioning and Room Control App BT-APP
Douglas Lighting Controls Bluetooth Commissioning and Room Control App BT-APP Field Manual *Patent Pending Table of Contents 1. GENERAL DESCRIPTION Page 3 2. SYSTEM REQUIREMENTS Page 3 3. SYSTEM SETUP
More informationHarmony Smart Control. User Guide
Harmony Smart Control User Guide Harmony Smart Control User Guide Table of Contents About this Manual... 6 Terms used in this manual:... 6 At a Glance... 6 Features... 6 Supported devices... 6 Know your
More informationThis document describes the different ways to allow the automation system to close a gpi contact from the transmission list.
GPI BOARD (RELAY ACTUATOR & ISOLATED D/I CARD) Date: August 03, 2000 This document describes the different ways to allow the automation system to close a gpi contact from the transmission list. CABLE REQUIREMENTS
More informationSHENZHEN H&Y TECHNOLOGY CO., LTD
Chapter I Model801, Model802 Functions and Features 1. Completely Compatible with the Seventh Generation Control System The eighth generation is developed based on the seventh. Compared with the seventh,
More informationPositive Attendance. Overview What is Positive Attendance? Who may use Positive Attendance? How does the Positive Attendance option work?
Positive Attendance Overview What is Positive Attendance? Who may use Positive Attendance? How does the Positive Attendance option work? Setup Security Codes Absence Types Absence Reasons Attendance Periods/Bell
More informationD-Star the Easy Way Using the DV Dongle
D-Star the Easy Way Using the DV Dongle Dr. John A. Allocca, WB2LUA, www.wb2lua.com, 3/24/18 Figure 1 - D-Star Basic Configuration 1 Figure 2 - D-Star Reflectors and Gateways D-Star First, let us look
More informationModbus for SKF IMx and Analyst
User manual Modbus for SKF IMx and SKF @ptitude Analyst Part No. 32342700-EN Revision A WARNING! - Read this manual before using this product. Failure to follow the instructions and safety precautions
More informationVSP 168HD Quick Start
VSP 168HD Quick Start Support 10Gbps of transmission rate Support HDBaseT protocols and standards Support USB upgrade Max 2048 1152@60Hz/2560 816 60Hz input/output resolution Support custom output resolution
More informationYAMAHA 03D SERIAL AUDIO MIXER
TECH NOTE Fastrack VS Verion 1.0 and later YAMAHA 03D SERIAL AUDIO MIXER The Fastrack VS hybrid editing system interfaces to the 03D Serial Audio Mixer with a 6-pin DIN to 9-pin RS-422 serial control cable
More informationThe user manual of LED display screen and RH-32G control card.
The user manual of LED display screen and RH-32G control card. ⅠHardware parameters 1 The maximum number of points P10 solid color:32*768 32*256(2 pieces high and 24 pieces wide;2 pieces high and 8 pieces
More informationIn-situ Port Cal for Dual Carriages Tuner
In-situ Port Cal for Dual Carriages Tuner In-Situ port cal method is the calibration technique mainly for cascaded tuners or multi-carriage tuner. Unlike in-situ system cal which requires 2 VNA calibrations
More informationProjector Management Application Version 7.00 Instruction Guide
Projector Management Application Version 7.00 Instruction Guide Contents 1 INTRODUCTION... 4 1.1 OUTLINE... 4 1.2 SYSTEM... 4 2 INSTALLATION... 5 2.1 SYSTEM REQUIREMENTS... 5 2.2 PROJECTOR MANAGEMENT APPLICATION
More informationSetup Guide. Quantum Data 70x/80x Series. Video Generators. Rev. 1.1
Setup Guide Quantum Data 70x/80x Series Video Generators Rev. 1.1 Introduction CalMAN Required Version The Quantum Data 70x and 80x Video Generator test patterns can be automatically controlled by CalMAN
More informationAPM CALIBRATION PROCEDURE Rev. A June 3, 2015
APM CALIBRATION PROCEDURE Rev. A June 3, 2015 Calibration of the APM allows system parameters such as coupler coupling values, interconnecting cable losses and system feeder losses to be programmed into
More informationConfiguration Vestas VMP3500
Configuration Vestas VMP3500 1. Table of contents 1. Table of contents... 2 2. Introduction... 3 3. Vestas turbines (RCS)... 4 3.1. VMP 3500 controller... 4 3.2. Communication with the CT3230 current loop
More informationAMIQ-K2 Program for Transferring Various-Format I/Q Data to AMIQ. Products: AMIQ, SMIQ
Products: AMIQ, SMIQ AMIQ-K2 Program for Transferring Various-Format I/Q Data to AMIQ The software AMIQ-K2 enables you to read, convert, and transfer various-format I/Q data files to AMIQ format. AMIQ-K2
More informationReceiver Integration Note
ELAN Home Systems Life Just Got Better Receiver Integration Note Manufacturer: Model Number(s): Controller Core Module: Denon Document Revision Date: 1/30/2012 OVERVIEW AND SUPPORTED FEATURES AVR-1912,
More informationTopic: Instructional David G. Thomas December 23, 2015
Procedure to Setup a 3ɸ Linear Motor This is a guide to configure a 3ɸ linear motor using either analog or digital encoder feedback with an Elmo Gold Line drive. Topic: Instructional David G. Thomas December
More informationRoku How To. a. Go to if you do not plan on purchasing premium channels or features.
Roku How To 1. First, create your Roku account. If you already have a Roku account please sign into your account. If you do not have an account please create one using the following options: a. Go to https://my.roku.com/signup/nocc,
More information0.56" 4 Digital Blue LED Panel Meter (rescalable) User s Guide
0.56" 4 Digital Blue LED Panel Meter (rescalable) User s Guide 2004-2009 Sure Electronics Inc. ME-SP037B_Ver1.0 0.56" 4 DIGITAL BLUE LED PANEL METER (RESCALABLE) USER S GUIDE Table of Contents Chapter
More informationViewing Serial Data on the Keysight Oscilloscopes
Ming Hsieh Department of Electrical Engineering EE 109L - Introduction to Embedded Systems Viewing Serial Data on the Keysight Oscilloscopes by Allan G. Weber 1 Introduction The four-channel Keysight (ex-agilent)
More informationLUMINOUS TWO APP USER GUIDE FOR ANDROID
LUMINOUS TWO APP USER GUIDE FOR ANDROID Disclaimer Please note that the images and instructions contained in this guide are based on app version 2.2.3. While the information is accurate to this app version,
More informationMini Micro Pulse Lidar System
Mini Micro Pulse Lidar System MiniMPL-532-C Sensor Suite Operations Manual Version: June 2016 THIS PAGE INTENTIONALLY LEFT BLANK 2 Table of Contents MINIMPL SENSOR SUITE SYSTEM: RECORD OF PURCHASE... 4
More informationTL-2900 AMMONIA & NITRATE ANALYZER DUAL CHANNEL
TL-2900 AMMONIA & NITRATE ANALYZER DUAL CHANNEL DATA ACQUISITION SYSTEM V.15.4 INSTRUCTION MANUAL Timberline Instruments, LLC 1880 S. Flatiron Ct., Unit I Boulder, Colorado 80301 Ph: (303) 440-8779 Fx:
More informationAppendix Lightolier Compose System
Appendix Lightolier Compose System The Lightolier Compose system has been designated a legacy feature and support is normally unavailable. Open the HCA Properties dialog and choose the legacy tab to enable
More informationS-Series Server Setup Quiz
1. In the System Setup window, System Information displays additional information such as: (a) IP Address (b) Modems (c) Sound Card (d) Video Channels and Audio Channels 2. You can change the Recording
More informationDesign and Use of a DTV Monitoring System consisting of DVQ(M), DVMD/DVRM and DVRG
Design and Use of a DTV Monitoring System consisting of DVQ(M), DVMD/DVRM and DVRG When monitoring transmission systems it is often necessary to control the monitoring equipment and to check the measurement
More informationMy XDS Receiver- Affiliate Scheduler
My XDS Receiver- Affiliate Scheduler The XDS distribution system represents a marked departure from the architecture and feature set of previous generations of satellite receivers. Unlike its predecessors,
More information2x50 ETHERNET MODULE
Kokkedal Industripark 4 DK-2980 Kokkedal Denmark info@eilersen.com Tel +45 49 180 100 Fax +45 49 180 200 2x50 ETHERNET MODULE Status and weight transfer using EtherNetIP Applies for: Program no.: ETHERNETIP.121113.1v0
More informationR4 AIS Class B Transponder
Saab TransponderTech R4 AIS Class B Transponder Configuration Manual GENERAL Page 1 i Copyright The entire contents of this manual and its appendices, including any future updates and modifications, shall
More informationPin Assignment for serial cables (RS232, 9-Pin)
Abstract Our Set-Top-Boxes ( STB ) are delivered with stable and easy-to-use software, passing our strict quality controls. However, we are steadily updating our software to improve functions or add-ups
More informationRack-Mount Receiver Analyzer 101
Rack-Mount Receiver Analyzer 101 A Decade s Worth of Innovation No part of this document may be circulated, quoted, or reproduced for distribution without prior written approval from Quasonix, Inc. Copyright
More information