PRODUCT LINE CARD. Phone: , Fax: , Web Site:

Transcription

1 PRODUCT LINE CARD 2011

2 Wirewerks is a leading manufacturer of copper and ber optic connectivity solutions. Since 1991, Wirewerks has been helping installers, integrators, and distributors across North America to meet today s most challenging networking and connectivity requirements CableOnce TM pre-terminated Fiber Optic Cabling Solution More than ever, network managers realize that choosing the right cabling system has become as important as choosing any other components in a network infrastructure. It is the Highway that carries your information securely and e ciently and supports your working environment. Downtime due to a poor cabling system is just not acceptable for any organization. CableOnce from Wirewerks emerged from these demands to o er to its clients a complete end-to-end pre-terminated ber optic solution that provides them peace of mind with a guaranteed performance as well as a life time guarantee on all components. How do we do this? By exceeding all TIA/EIA, ISO/IEC, and IEEE industry standards; by using state of the art testing equipment and comprehensive testing procedures; and by establishing an uncompromising quality control practice. KeyWerks TM Copper Cabling Solution Wirewerks KeyWerks provides, a standards based, full connectivity solution, to the enterprise network. From the active equipment to the workstation, the KeyWerks connectivity solution is designed to t the universal Keystone footprint latch. Our KeyWerks solution includes CAT5E and CAT6 Keystone modules, CAT5E and CAT6 patch cords, patch panels, and face plates. Our KeyWerks TM connectivity solution is designed with 2 key objectives: To simplify the installation and reduce deployment time while keeping functionality. To o er a cost conscious solution and still uphold Wirewerks superior quality standards.

3 KeyWerks TM Copper Connectivity Solution Keystone patch panels Telecommunication & Equipment Room Data Centers Multimedia Consolidation Points 1U (24 ports) & 2U (48 ports) con gurations Compatible with 19 racks / cabinets Compatible with KeyWerks TM keystone modules or any other keystone product Port numbering (Top & Bottom) to facilitate port identi cation Part Number WW Description CAT5E KeyWerks TM 1U, 24 port, Copper Patch Panel Loaded with Black Modules WW WW WW WW CAT5E KeyWerks TM 2U, 48 port, Copper Patch Panel Loaded with Black Modules CAT6 KeyWerks TM 1U, 24 port, Copper Patch Panel Loaded with Black Modules CAT6 KeyWerks TM 2U, 48 port, Copper Patch Panel Loaded with Black Modules KeyWerks TM 1U, 24 port, Copper Patch Panel, Black (Empty) Keystone modules Data Centers Telecommunication or Equipment Room Consolidation Points Keystone face plates WW KeyWerks TM 2U, 48 port, Copper Patch Panel, Black (Empty) Color-coded termination for T568A/B wiring schemes & USOC Clear protective wire cap allowing security during wire management Universal IDC termination interface Available in seven colors to facilitate network management Compatible with KeyWerks TM patch panels, faceplates & surface mount, or any other keystone products Product comes with installation guide Ordering Od Information Color Category 3 Category 5E Category 6 White KW-CC3-45T-WH KWC5E-45B-WH KWCC6-45B-WH Blue KW-CC3-45T-BL KWC5E-45B-BL KWCC6-45B-BL Black KW-CC3-45T-BK KWC5E-45B-BK KWCC6-45B-BK Yellow KW-CC3-45T-YL KWC5E-45B-YL KWCC6-45B-YL Color Category 3 Category 5E Category 6 Red KW-CC3-45T-RD KWC5E-45B-RD KWCC6-45B-RD Green KW-CC3-45T-GN KWC5E-45B-GN KWCC6-45B-GN Almond KW-CC3-45T-AL KWC5E-45B-AL KWCC6-45B-AL Compatible with KeyWerks TM keystone, multimedia, or any other keystone modules Single gang available in 1, 2, 4, and 6 port version Double gang available in 4, 6, and 12 port version KeyWerks TM modules can be independently installed/ uninstalled Custom colors available on request Telecommunication or Equipment Room Multimedia Work Station KeyWerks TM 110-type punch tool Color Single gang Double gang 1-port 2-port 4-port 6-port 4-port 6-port 12-port White WW WW WW WW N/A WW WW Almond WW WW WW WW N/A WW WW Stainless Steel WW WW WW WW WW WW N/A KeyWerks TM Palm tool for connector termination CAT5E & CAT6 module termination Terminates 90 0 angled and angled modules Easy to use Compatible with all 110 or 66 IDC Part Number: WW KeyWerks TM 110-Type Punch Tool CAT5E & CAT6 module termination Holds 90 0 angled and angled modules Ergonomic Design Compatible with all modules o ering a Keystone footprint User guide included Part Number: WW KeyWerks TM Palm Tool for Connector Termination

4 KeyWerks TM Copper Connectivity Solution CMR copper patch cords Multimedia Connections Patch panel connections Consolidation point connections Keystone surface mount box Keystone multimedia inserts Meet all TIA/EIA-568 component requirements 100% performance tested UTP unshielded product CMR rated CC - Cord Performance & Type C5 = Cat5E OverMold Boot C6 = Cat6 OverMold Boot A - Conductor Size 1 = Solid pigtail 2 = Stranded patch cords Telecommunication or Equipment Room Multimedia LL - Color WH = white GY = grey Available in 1,2,4, and 6 port housings Compatible with any Keystone footprint adapter Available in 2 colors: White and Almond Stranded conductors for cable exibility and easy installation Over molded strain relief boot C C 4 0 A R L L C X X X BL = blue YL = yellow C - Configuration A = RJ45 Patch Cord 568A / B C = RJ45 Pigtail 568A GN = green RD = red XXX - Length Patch Cords 002 = 2ft 004 = 4ft 007 = 7ft 010 = 10ft 015 = 15ft 025 = 25ft Pigtails 015 = 15ft 025 = 25ft 035 = 35ft 050 = 50ft Color 1-port 2-port 4-port 6-port White WW WW WW WW Almond WW WW WW WW Data Centers Telecommunication or Equipment Room Consolidation Points Compatible with any products that o er Keystone footprint RCA Modules & Speaker Posts KW-CZZ- Y Y A - N N YY - Type A - Insulation Color NN - Insert Color RC = RCA Coupler R = Red B = Blue* WH = White BP = Speaker Post W = White M = Red / Black** AL = Almond RF = RCA to F Connector Y = Yellow A = No Color*** BK = Black G = Green* *Available for RCA Coupler only. **Available for Speaker Post only. ***Available for RCA to F connector only F-type and BNC Couplers KW-CZZ- A A A - Y Y AAA - Coupler Type FTC = F Type 3 GHz BNC = BNC Regular foot print BNS = BNC Small foot print YY - Insert Color WH = White AL = Almond BK = Black Inserts KW-ZZZ- Y Y Y - N N YYY - Style BLK = Blank Cover NN - Insert Color WH = White AL = Almond BK = Black Fiber Optic Modules KW-F Y Y - A A YY - Performance S1 = Single Mode S2 = Single Mode APC M1 = Multimode M3 = Multimode OM3 Z - N N AA - Interface NN - Insert Color WH = White AL = Almond BK = Black Surface mount back box Telecommunication or Equipment Room Multimedia Accommodate single gang and double gang faceplates Knock out on all sides for easy cable entry Single gang and double gang available UL 94V-0 rating Color Single gang Double gang White WW WW Almond WW WW Decora faceplates Compatible with KeyWerks TM keystone, multimedia, or any other keystone modules Available in single, double, triple, and quad gang UL 94V-0 rated Telecommunication or Equipment Room Multimedia Color Single gang Double gang Triple gang Quad gang White WW WW WW WW Almond WW WW WW WW *Note: Decora Bezel available in 1, 2, 4, 6 ports, or blank. Colors available: White, Almond.

5 CableOnce TM Fiber Optic Cabling Solution Fiber optic patch cords Test and Measurement Equipments LAN and WAN Broadband Y - Fiber Type 1 = Single Mode OS2 2 = 62.5/125μm Multimode OM1 3 = 50/125μm Multimode OM2 4 = 50/125μm Multimode OM3 5 = 50/125μm Multimode OM4 A = Single Mode OS2 Bend Insensitive 5mm B = 50/125μm Multimode OM2 Bend Insensitive 5mm C = 50/125μm Multimode OM3 Bend Insensitive 5mm D = 50/125μm Multimode OM4 Bend Insensitive 5mm E = Single Mode OS2 Bend Insensitive 10mm A - Cable Type A = 2 Fiber Zip 3mm OFNR B = 2 Fiber Zip 3mm OFNP C = 1 Fiber 3mm OFNR D = 1 Fiber 3mm OFNP E = 2 Fiber Zip 2mm OFNR F = 2 Fiber Zip 2mm OFNP G = 1 Fiber 2mm OFNR H = 1 Fiber 2mm OFNP I = 2 Fiber Zip 1.8mm OFNR J = 2 Fiber Zip 1.8mm OFNP K = 1 Fiber Tight Buffer 900μm L = 1 Fiber Coated 250μm Mode conditioning patch cords 100% factory tested Single mode OS2, and Multimode OM1, OM2, OM3, OM4 All connector styles available Bend Insensitive Custom patch cord available on request All Corning products available PC - Y A N N X Y Y A NN - Connector Side A* MT = MTRJ Female MB = MTRJ Male S5 = SMA905 S6 = SMA906 E2 = E2000 ES = ESCON FD = FDDI D4 = D4 *If more than one connector type, then place in alphabetical order, i.e. LC before ST, to avoid duplicate of part number creation for the same product. R = 2 Fiber Zip 3mm LSZH S = 2 Fiber Zip 1.8mm LSZH T = 2 Fiber Round 3mm OFNR U = 2 Fiber Round 3mm OFNP V = 2 Fiber Round 3mm LSZH X - Polish Side A B = UPC C = PC E = SPC F = EUPC YY - Connector Side B MT = MTRJ Female MB = MTRJ Male S5 = SMA905 S6 = SMA906 E2 = E2000 ES = ESCON FD = FDDI D4 = D4 OE = Pigtail A - Polish Side B B = UPC C = PC D = N/A E = SPC F = EUPC 000 = Patch Cord Length (m)** **If a decimal is required, add D00 right after the nondecimal value and without leaving any space between. The 00 in D00 must be replaced by the desired value. Example: an assembly with an overall length of meters shall read as 105D55. Rack mount panels Wall mount panels Equipment interconnection High speed data transfer Telecom network Gigabit Ethernet PC, UPC and APC connector polish types Multiple ber options Available with FC,SC,ST,LC,MTRJ, and MU terminations Jacketing options LAN,WAN,SAN s Industrial control systems Adapter strips or modules accommodated Available in 1U (3 strips/modules, up to 72 bers), 2U (6 strips/modules,up to 144 bers) and 4U (12 strips/modules, up to 288 bers) Adaptable to 19 or 23 standard racks Easy front and back access Entrance Facility Data Centers Telecommunication or Equipment Room Consolidation Points Available in 1, 2, and 4 strips E ective slack management Plastic management spools for better ber bend radius Lockable Part Number Description Dimensions PP-WM1S PP-WM2S PP-WM4SD WW МC A - Core Size 2 = 62.5/125 3 = 50/125 A B B C C BB - Offset Conn MT = MTRJ MU = MU Wall Mount Mini Enclosure with Push-Pin in Hardware Kit, Black, 1 Strip Wall Mount Panel Double Door with Installed Push- Pin, Black, 2 Strips Wall Mount Panel Double Door with Installed Push- Pin, Black, 4 Strips 1 Cam Lock with keys for PP-WM2S and PP-WM4SD CC - Conn. #2 MT = MTRJ MU = MU 7 L x 6.5 H x 1.5D 15-5/8 L x 13 H x 2-1/8 D 15-5/8 L x 15 H x 3-1/2 D N/A Length in M 001 = 1M 002 = 2M 003 = 3M 010 = 10M 020 = 20M Part Number Description Dimensions PP-W1U1 PP-W2U1 PP-W4U1 1U Enclosed Rack Mount Patch Panel Housing 2U Enclosed Rack Mount Patch Panel Housing 4U Enclosed Rack Mount Patch Panel Housing 17 L x14 D x 1.74 H 17 L x14 D x 3.47 H 17 L x14 D x 6.67 H WW U Enclosed Rack Mount Panel, 72 port, Black 17 L x17 D x 6.98 H *Note: All of our panels come with complete installation instructions.

6 CableOnce TM Fiber Optic Cabling Solution Fixed attenuators Test and Measurement Equipments LAN Media converters LC, SC, FC, and ST con gurations Available in single mode and multimode Low back re ection Available in 1 to 30dB attenuation WFA - Y A N N R X 0 0 Y - Attenuator s Type A = Optical Pad Attenuator (male to female) B = Bulkhead Attenuator (female to female) A - Fiber Type 1 = Single Mode 2 = Multimode 62.5/125μm 3 = Multimode 50/125μm NN - Interface Type SC=SC LC=LC FC=FC ST=ST R - Interface Polish 1 = APC 2 = UPC 3 = PC X - Wavelength A = Dual 1310/1550nm (Single mode) B = 1300nm (multimode) C = 850nm (multimode) 00 - Attenuation ( in db) 01 = 1dB 02 = 2dB 03 = 3dB 04 = 4dB 05 = 5dB 06 = 6dB 07 = 7dB 08 = 8dB 09 = 9dB 10 = 10dB 15 = 15dB 20 = 20dB 25 = 25dB 30 = 30dB Part Number WW-802 WW-802S15 WW-802S35 WW-802S50 WW-702 WW-702S Description 10/100 Base TX to 100 Base LX, 1310nm, Multimode, SC 2km 10/100 Base TX to 100 Base LX, 1310nm, Single mode, SC 15km 10/100 Base TX to 100 Base LX, 1310nm, Single mode, SC 35km 10/100 Base TX to 100 Base LX, 1310nm, Single mode, SC 50km 1000 Base TX to 1000 Base SX, 850nm, Multimode, SC 550m 1000 Base TX to 1000 Base LX,1310nm, Single mode, SC 10km LAN,WAN,SAN s Several con gurations available 100% tested and inspected Distribution modules Wireless & Wired Networking Industrial Control Systems Splice trays Part Number SPL-MSPL6 WW-705 WW-902 WW-903 WMC-625SC15 WMC-625SC35 WW-722S15 WW-722S35 Compatible with most common panels Quick and easy, tool-less mounting Complete optical testing Available in all standard ber types and most standard connector types Custom module con guration available A - Core Size 1=Single mode 2=62.5/125μm 3=50/125μm 4=50/125μm 10Gig FTTP LAN External Plant 1000 Base TX to 1000 Base SX, 850nm, Multimode, LC 550m 10/100/1000 Base TX to 1000 Base SX, 850nm, Multi mode, SC 550m 10/100/1000 Base TX to 1000 Base LX, 1310nm, Single mode, SC 10km 100 Base LX, SC-SC, Multimode to Single mode, 15Km, 1310nm to 1310nm 100 Base LX, SC-SC, Multimode to Single mode, 35Km,1310nm to 1310nm 100 Base FX, SC-SC, Multimode to Single mode, 15Km, 850nm to 1310nm 100 Base FX, SC-SC, Multimode to Single mode, 35Km,850nm to 1310nm B - MPO Type M=Male F=Female DM CC - Conn. SC=SC ST=ST LC=LC FC=FC MT=MTRJ Available for wall and rack mount enclosures Maximum physical protection for fusion splicing Used with both loose tube and tight bu ered cable designs Available in metal (up to 24 splices) and plastic (up to 12 splices) Description A B C C D E E D - Polish A=APC B=UPC C=PC EE - #Fibers 06=6 fibers 12=12 fibers 24=24 fibers Metal splice tray, 4 x 7, plastic clear cover, 2 soft foam removable inserts, holds up to 12 fibers SPL-MSPL12 SPL-MSPL24 SPL-WS12A Metal splice tray, 4 x 12, plastic clear cover, 2 soft foam removable inserts, holds up to 12 fibers Metal splice tray, 4 x 12, plastic clear cover, 4 soft foam removable inserts, holds up to 24 fibers Stackable black plastic splice tray, holds up to 12 fibers

7 Fiber optic cable assemblies Data Center Harsh Environment SAN, LAN and WAN Broadband FA - Y A N R X X Y A A A N N X Y Y A N Y - Fiber Type 1 = Single Mode OS2 2 = 62.5/125μm Multimode OM1 3 = 50/125μm Multimode OM2 4 = 50/125μm Multimode OM3 5 = 50/125μm Multimode OM4 A = Single Mode OS2 Bend Insensitive 5mm B = 50/125μm Multimode OM2 Bend Insensitive 5mm C = 50/125μm Multimode OM3 Bend Insensitive 5mm D = 50/125μm Multimode OM4 Bend Insensitive 5mm E = Single Mode OS2 Bend Insensitive 10mm A - Cable Type N - Jacket Type D = Distribution P = OFNP B = Breakout R = OFNR L = Loose Tube Z = LSZH R = Ribbon O = Outdoor T = Tactical A = ADSS M = Mini-Distribution R - Armor Type N = Non - armored B = BX Type L = Light armor Adapter strips ions LAN,WAN,SANs,SANs Industrial Control Systems Hybrid adapters Single mode OS2, and Multimode OM1, OM2, OM3, OM4 Custom multi ber assemblies available All connector styles available Bend Insensitive Pulling eye Long length provided on easy to use reel Individually packaged Low link loss All Corning products available XX - Fiber Count 02 = 2 Fiber 04 = 4 Fiber 06 = 6 Fiber 08 = 8 Fiber N = Indoor/Outdoor OFNP 12 = 12 Fiber L = Indoor/Outdoor OFNR 18 = 18 Fiber 24 = 24 Fiber 36 = 36 Fiber 48 = 48 Fiber 72 = 72 Fiber 96 = 96 Fiber C4 = 144 Fiber Y - Lead OD 9 = 900μm 2 = 2mm 3 = 3mm Z = N/A AAA - Lead Length XXN = Length in Inches XXM = Length in Meters ZZZ = N/A NN = Connector Side A* MT = MTRJ Female MB = MTRJ Male S5 = SMA905 S6 = SMA906 E2 = E2000 ES = ESCON FD = FDDI D4 = D4 MP = MPO Female Type A** MA = MPO Male Type A** BP = MPO Female Type B BA = MPO Male Type B CP = MPO Female Type C CA = MPO Male Type C X - Polish Side A B = UPC C = PC E = SPC YY - Connector Side B MT = MTRJ Female MB = MTRJ Male S5 = SMA905 S6 = SMA906 E2 = E2000 ES = ESCON FD = FDDI D4 = D4 MP = MPO Female Type A** MA = MPO Male Type A** BP = MPO Female Type B BA = MPO Male Type B CP = MPO Female Type C CA = MPO Male Type C OE = Pigtail A - Polish Side B B = UPC C = PC D = N/A E = SPC Assembly Length (m) N - Accessory 0 = None 1 = 1 Pulling Eye 2 = 2 Pulling Eyes *If more than one connector type, then place in alphabetical order, i.e. LC before ST, to avoid duplicate of part number creation for the same product. ** By default, cable assemblies with MPO connectors are manufactured with a Type A configuration. If an assembly is connectorized on both sides with an MPO connector, configuration types cannot be mixed. Examples: If a Type A is chosen on one end, the other end MUST also be of Type A configuration. If a Type B is chosen on one end, the other end MUST also be of Type B configuration. If a Type C is chosen on one end, the other end MUST also be of Type C configuration. Two industry standard sizes to choose from Accommodate all standard connector and ber types (single mode, multimode, and laser optimized 10Gigabit. LC, MTRJ, SC, and ST adapters also available A B C C D A - Strip Type Wirewerks W = Type A, 5.10 x 1.15 C = Type C, x 1.37 B - Connector Type L = LC C = SC R = MTRJ T = ST M=MPO Mating sleeves AS CC - Number of Fibers 06 = 6 Fibers 12 = 12 Fibers 24 = 24 Fibers 96 = 96 Fibers (8 x MPO ) D - Fiber Type M = 62.5/125, 50/125 MM G = 50/ Gig MM S = Single Mode A = Single Mode, APC HA A- Sleeve 1 = ceramic 2 = bronze A B C C C D D D E F B - Mode 1 = Singlemode 2 = Multimode 3 = APC CCC - Conn. #1 SCM = SC Male STM = ST Male LCM = LC Male FCM = FC Male SCF = SC Female STF = ST Female LCF = LC Female FCF = FC Female LAN Available in single mode and multimode, simplex and duplex FC, SC, ST, LC connector options DDD - Conn. #2 SCF = SC Female STF = ST Female LCF = LC Female FCF = FC Female Е - Duplex/simplex S = Simplex D = Duplex F - Body material P = Plastic M = Metal МS-SC A А - Sleeve 1 = Ceramic 2 = Bronze МS-ST BB - Body Type SD = SM Duplex SS = SM Simplex MS = MM Simplex MD = MM Duplex A B B C C - Body Mtl P = Plastic M = Metal А - Sleeve BB - Body Type C - Body Mtl 1 = Ceramic SD = SM Duplex P = Plastic 2 = Bronze SS = SM Simplex MS = MM Simplex MD = MM Duplex M = Metal МS-FC А - Sleeve 1 = Ceramic 2 = Bronze A B B C BB - Body Type SB = Solid Body TP = Two Piece DS = D Shaped D3 = D3 Shaped RG = Rectangular C - Mode 1 = SM 2 = MM 3 = APC D - Flanges 0 = no flange 1 = flanged МS-LC A B B А - Sleeve BB - Body Type 1 = Ceramic SD = SM Duplex 2 = Bronze SS = SM Simplex MS = MM Simplex MD = MM Duplex SC = SM SC foot print МS-MU A B B А - Sleeve BB - Body Type 1 = Ceramic SD = SM Duplex 2 = Bronze SS = SM Simplex PDS-0060-EN-D

8 HDMI cables Copper assemblies Copper patch cords Multimedia connections Patch panel connections Consolidation point connections Telecommunication outlet connections Node service cables receiver box Aerial splice box Outside plant Blu-Ray and HD DVD players Multimedia personal computers Gaming systems Digital camcorders Audio / Video monitors Plasma & LCD screens Support Deep Color 30, 36, and 48-bit Ultra-high resolution supporting 1080p 100% factory tested Optimized shielded design for a maximum protection against EMI, RFI, signal noise Data communication Automation CAT - Y Y A N N YY - Performance 5E = CAT5E 06 = CAT6 Low link loss Easy installation 100% factory tested WNC - Y A A N N X X Y W W W Z Z Z Z Y - Cable Type A = Armored Outdoor Loose Tube N = Non-Armored Outdoor Loose Tube AA - Fiber Type 9S = 900 micron Single Mode (Color sequence as per TIA-598-C) 2S = 2mm Single Mode (yellow) 3S = 3mm Single Mode (yellow) 28 = 2mm Single Mode (Color sequence as per TIA-598-C) 38 = 3mm Single Mode (Color sequence as per TIA-598-C) NN - Fiber Count 02 = 2 fiber 04 = 4 fiber 06 = 6 fiber NN - Color GY = Grey BL = Blue BK = Black OG = Orange WH = White GR = Green YL = Yellow RD = Red PR = Purple 08 = 8 fiber 10 = 10 fiber 12 = 12 fiber Length in Feet 001 = 1ft 012 = 12ft 002 = 2ft 015 = 15ft 003 = 3ft 020 = 20ft 004 = 4ft 025 = 25ft 005 = 5ft 050 = 50ft 006 = 6ft 100 = 100ft 007 = 7ft 010 = 10ft Low insertion and return loss Interferometer test results available XX - Connector Type Y - Polish U = UPC Color Part Number Length in Feet Black housing, male to male, Grey Black housing, male to male,red Analog and Digital Cable Assemblies Ribbon Cable Assemblies Audio and Video Cable Assemblies Power Distribution Cables Electromechanical Assemblies Power Cord Assemblies Industrial Equipment Wiring Assemblies Network & Communication Cables Military Wire Harnesses and Cables Specialized Automotive Assemblies DIN & Mini-DIN Connector Assemblies Octopus Type Cable Assemblies Any Custom Assemblies You Require! Product channel tested to ANSI/ TIA-568-C.2 Stranded conductors for cable exibility and ease of installation Over molded strain relief boot Connector s pins Gold plated 50U over 100U Nickel CAT5e tested up to 350 MHz; CAT6 tested up to 550 MHz Electrical Communication Crossover patch cords YY - Performance 5C = CAT5e gigabit T568B crossover 5X = CAT5e A to B crossover 6C = CAT6 gigabit 568B crossover 6X = CAT6 A to B crossover HDMI-13b-MM HDMI-13b-MM HDMI-13b-MM HDMI-13b-MM HDMI-13b-MM HDMI-13b-MM HDMI-13b-MM HDMI-13b-MM HDMI-13b-MM HDMI-13b-MM HDMI-13b-MM The following is a list of the most common assemblies we manufacture for our customers Plenum Cable Assemblies IBM Voice Data Cabling Black Box Coaxial Cable Assemblies Circular Connector Assemblies CAT - Y Y A N N NN - Color YL = Yellow RD = Red WWW - Fiber Leads Length (m)* 001 = 1 meter ZZZZ = Assembly Length (m)** * By default, the length of the leads is 1 meter (001). If a decimal is required, add D0 right after the nondecimal value and without leaving any space between. The 0 in D0 must be replaced by the desired value. Example: A node service cable with leads of 0.5meter shall read as 0D5; if the leads are 1.5 meters, it shall read 1D5. ** If a decimal is required, add D0 right after the non-decimal value and without leaving any space between. The 0 in D0 must be replaced by the desired value. Example: an assembly with an overall length of 25.5 meters shall read as 25D Length in Feet 001 = 1ft 003 = 3ft 005 = 5ft 007 = 7ft 010 = 10ft 015 = 15ft