Exploded Views and Parts List 1. HCF MAIN. Exploded View. Parts List. Copyright SAMSUNG. All rights reserved.
|
|
- Martha Patrick
- 5 years ago
- Views:
Transcription
1 Exploded Views and Parts List. HCF MAIN Exploded View Parts List No. Lvl. Loc. Material Code Description & Specification JC A COVER-CASSETTE; K7600 JC9-04A DRIVE-FEED HCF; K7600 JC9-05A DRIVE-PICKUP; K JC9-08A DRIVE-LIFT SHIFT; K JC90-084A HCF SUB-TAKEAWAY; K JC90-080A CASSETTE-HCF; K JC9-09A PICK UP-HCF MAIN; K JC9-09A DRIVE-TAKEAWAY ROLLER; K JC6-0480A COVER-DRIVE HCF; K7600,ABS,.5,6.5, JC90-08A HCF SUB-AUTO CLOSER; K7600 Copyright MSUNG. All rights reserved. Qty.
2 No. Lvl. Loc. Material Code Description & Specification Qty. JC9-0A FRAME-HCF; K7600 JC A COVER-DCF; K7600 Copyright MSUNG. All rights reserved.
3 .. HCF DRIVE Exploded View Parts List No. Lvl. Loc. Material Code Description & Specification Qty. JC9-04A DRIVE-FEED HCF; K JC-0077A MOTOR STEP P; K7600,HB,,4,000pps,., BELT-TIMING GEAR; K7600,CR - JC A GEAR-DRIVE FEED; X7600,POM,M.0/0.8,NATUR -4 JC66-049A GEAR-RDCN PULLY FEED OPT; K7600,POM,.0/S -5 JC A COVER-COUPLING; K7600,ABS,BLACK,HF-0660I -6 JC6-066A GUIDE-PULLEY OPT; K7600,POM,,9,F5-0HT JC9-05A DRIVE-PICKUP; K JC9-008A DRIVE-MOTOR STEP; X7600,K JC A GEAR-DRIVE PICKUP; X7600,POM,M0.4/0.8,NAT Copyright MSUNG. All rights reserved.
4 No. Lvl. Loc. Material Code Description & Specification Qty. JC9-08A DRIVE-LIFT SHIFT; K JC-005A MOTOR GEARED-SHIFT; 90RPM,0.9NM,DC4V,A, - JC-0009A MOTOR GEARED; 8.5rpm,.5N.m,4V,A,6.5, 4 Copyright MSUNG. All rights reserved.
5 Exploded Views and Parts List.. CASSETTE-HCF Exploded View Copyright MSUNG. All rights reserved. 5
6 Parts List No. Lvl. Loc. Material Code Description & Specification Qty. 0 JC90-080A CASSETTE-HCF; K7600 JC8-0749A CSP-FRAME-CASSETTE; CLX-HCF0 JC6-074A HOLDER-CONNECTOR_SCF; ML-4550,ABS+GF,.0, E PHOTO-INTERRUPTER; TR,75mW,BGA,TR 4 4 JC7-050A ACTUATOR; SCX-60F,ABS+GF,HB,BLACK,ACTUA 5 JC6-04A SHEET-GUIDE CST; CLX-950,PET,0.5 6 JC A CSP-COVER-PAPER SIDE L; CLX-HCF0 7 I6 JC6-0079A GROUND-P-SPRING SCAN; SCX-645N/XRX,STS,0 8 JC6-0A ROLLER-IDLE CST; CLX-950,POM,OD0,L6.5, 9 JC6-0504A SHEET-AS LABEL MAX FILL; K7600,PC,0.5 0 JC8-0750A CSP-PLATE-LIFT_BAR; CLX-HCF0 JC A CSP-BRKT-SENSOR; CLX-HCF0 JC A CSP-GROUND-REAR; CLX-HCF0 JC8-0754A CSP-PLATE-PAPER; CLX-HCF0 4 G48 JB A SPRING ETC-TORSION DOC (CC-F); SCX-0F 5 JC A CSP-GROUND-RAIL; CLX-HCF0 6 JC90-049A HCF SUB-COVER PAPER SIDE R; K JC9-056A HARNESS-HCF SUB DRAWER; X7600,UL07,50 8 JC A SHAFT-PLATE LIFT; CLX-HCF0,SUM,4.9, 9 JC A CSP-BRKT-SHAFT; CLX-HCF0 0 JC8-075A CSP-PULLEY-BELT LIFT; CLX-HCF0 JC90-049A HCF SUB-REAR PAPER; K7600 JC A SHAFT-PLATE BEAM; CLX-HCF0,SUM,80.5, JC90-049A HCF SUB-KNOCK UP PAPER; K JC9-05A HARNESS-HCF SUB LEVEL; X7600,UL07,50 5 JC8-0757A CSP-PLATE-SHAFT_M; CLX-HCF0 6 JC A SHAFT-PIN ASMO; CLX-HCF0,SK-5,8,.5,S 7 JC6-0657A BRACKET-ARM PUSHER; K7600,EGI-SECC,T.0, 8 JC8-0758A CSP-PLATE-SHAFT_S; CLX-HCF0 9 JC6-0747A GUIDE-RAIL CASSETTE; K7600,EGI-SECC,.,4 6 Copyright MSUNG. All rights reserved.
7 Exploded Views and Parts List.. FRAME-HCF Exploded View Parts List No. Lvl. Loc. Material Code Description & Specification JC6-0A ROLLER-IDLE CST; CLX-950,POM,OD0,L6.5, JC9-00A FRAME-REAR HCF; K7600 JC90-085A DCF SUB-TAKEAWAY INTERLOCK; K JC A BRACKET-PANEL D_H; K7600,EGI-SECC,0.8,57, 5 JC A BRACKET-ADJUSTER-PAD; CLX-PFP00,SECC,T. 4 6 JC6-0487A GUIDE-ADJUST DCF; CLX-PFP00,ABS,80,HB HF CASTER; 46,NYLON 4 8 JC6-0664A GUIDE-RAIL LOWER R HCF; K7600,ABS,.7,0. Copyright MSUNG. All rights reserved. Qty. 7
8 No. Lvl. Loc. Material Code Description & Specification Qty. 9 JC6-0664A GUIDE-RAIL LOWER L HCF; K7600,ABS,,7., 0 JC A FRAME-BOTTOM D_H; K7600,EGI-SECC,.6,68, JC9-00A FRAME-LEFT HCF; K7600 JC90-08A HCF SUB-RIGHT ASSY; K7600 JC9-078B PBA-HCF; K7600,SEC,EXIT,8*8MM 4 JC9-085A HARNESS-SUB_IF_HCF; X7600,UL07,700,GRA 5 JC9-084A HARNESS-HEATER_HCF; X7600,UL07,5,BLK 6 JC9-08A HARNESS-MAIN_IF_HCF; X7600,UL07,75,GR 7 JC A HOLDER-HINGE REAR; K7600,POM,,5,60,BLAC 8 JC A FRAME-RIGHT REAR; K7600,EGI-SECC,.6,9, 9 JC9-086A HARNESS-INNER_TRAY_HCF; X7600,UL07,700 0 JC9-079A HARNESS-MOT_HCF; X7600,UL07,700,GRAY,A JC9-080A HARNESS-PSENS_HCF; X7600,UL07,550,GRAY JC9-08A HARNESS-PSENS_HCF; X7600,UL07,500,GRA 8 Copyright MSUNG. All rights reserved.
9 .4. PICK UP-HCF MAIN Exploded View Parts List No. Lvl. Loc. Material Code Description & Specification Qty. 0 JC9-09A PICK UP-HCF MAIN; K SPRING-CS; STAINLESS-STS04,0.5,,7.5,RI JC6-0776A SHEET-SENSOR; CLX-90,PET,0.88,8.8,8.5 JC6-070A GUIDE-SLIDE PICKUP; X7600,POM,F0-0,BLAC 4 JC A COUPLER-TORQUELIMITER; CLX-950,WHITE,50 5 JC9-009A FRAME MAIN-PICKUP ROLLER; X PHOTO-INTERRUPTER; DIODE,DIP 7 JC A BRACKET-SENSOR FEED; X7600,EGI-SECC,0.8T, 8 JC66-08A GEAR-PICKUP; CLX-90,POM,0.8,,NATURAL( Copyright MSUNG. All rights reserved. 9
10 No. Lvl. Loc. Material Code Description & Specification Qty BEARING BALL; DDLF-060ZZH,6,0,,LY77 0 JC6-057A BUSH-D6/L6; CLX-950,Fe+Cu+Zn,ID6,OD9,L6 JC A ROLLER FEED-OPT; K7600,EPDM,SUS0,8 JC6-0684A BRACKET-PICKUP REAR; X7600,EGI-SECC,.T, JC6-068A BRACKET-PICKUP FRONT; X7600,EGI-SECC,.T 4 JC9-0099A FRAME MAIN-PICKUP LOWER; X L CABLE CLAMP; 4,Nylon66 6 H74 JC A BUSH-6_D(L); SCX-60F,BRONZE,6,4,0,N 7 H704 JC A CLUTCH-P_ONE WAY; SCX-645N/XRX,STS04,0. 8 JC9-00A FRAME MAIN-PICKUP UPPER; X PHOTO-INTERRUPTER; PHOTO DIODE,0mW,P 0 JC6-0665A GUIDE-HARNESS; ABS,5.8,6.4,9.,HF-066 JC6-0660A HOLDER-SWITCH; ABS,5.,5.6,BLACK,HF-06 JC6-0658A GUIDE-HCF EXIT INSIDE ST; K7600,EGI-SECC JC6-0676A BRACKET-TAKEAWAY_F HCF; K7600,EGI-SECC,. 4 JC6-065A BRACKET-SENSOR; K7600,EGI-SECC,T.0,67., 5 JC A ROLLER FEED-TAKEAWAY; K7600,EPDM,SUS0,8 6 JC A GEAR-FEED_IDL_HCF; K7600,POM,0.8,,NATUR 7 JC A GEAR-FEED; K7600,POM,0.8,,NATURAL (WHIT 8 JC66-048A PULLEY-BELT; K7600,POM,Natural,NW-0,SM 9 JC6-0664A GUIDE-HARNESS DCF; ABS,48.6,84.6,.6,HF- 0 JC6-0656A BRACKET-TAKEAWAY_R_HCF; K7600,EGI-SECC,T JC A GEAR-IDLE_FEED; K7600,POM,0.8,5,NATURAL JC A FLANGE-BELT PULLEY; K7600,POM,.5,GUIDE JC9-04A FRAME MAIN-GUIDE PICKUP HCF; K Copyright MSUNG. All rights reserved.
1. MAIN. Exploded View. Parts List GREY ML-2540,SECC,0.6,247.6,314 ML-1400,SECC,1.00,61.2,2. SCX-4623FN,UL1061,300mm,B ML-2580N,SANDPIPER-H V2,FLY
Explod Views and Parts List. MAIN Material Co Description & Specification SNA JC90-06D CASSETTE; ML-2540R,SEC,NAVY GREY SA JC98-0869A 2 JC63-0374A SHIELD-ENGINE; ML-2540,SECC,0.6,247.6,34 SNA w Parts List.M
More informationCollator series 300/400, 310B Spare parts list
Collator series 300/400, 30B Spare parts list AUGUST 997 Part # 9049 USER INFORMATION T0703 This Spare part list is devided into one Series 300/400 section, one 30 B section and one Paper feeder section.
More information3. Disassembly and Reassembly
3. Disassembly and Reassembly 3.1 General Precautions on Disassembly When you disassemble and reassemble components, you must use extreme caution. The close proximity of cables to moving parts makes proper
More informationM8400RV Base Cover Assembly Item # Part Number Part Description Qty
Base Cover Assembly Item # Part Number Part Description Qty 1 PH1741200 Base frame 1 2 PT6680100 Rubber foot 4 3 PA3741000 Frame bracket 1 4 MD4301022 Pan head screw 3 5 PA3742500 Frame bracket 1 6 MD4301022
More informationM-8400RVe Printer. Parts List. Page 1-1. P/N Rev.B
M-8400RVe Printer Parts List Page 1-1 P/N 9001085 Rev.B Table of Contents M-8400RVe Parts List Page Frame Assembly...3 Head Assembly... 8 Ribbon Assembly... 11 Feed Roller Assembly... 16 Base Cover Assembly...
More informationM-8460Se Printer Standard Unit
M-8460Se Printer Standard Unit Parts List Page 1-1 P/N 9001090 Table of Contents M-8460Se Spare Parts List Page Frame Assembly...3 Print Head Assembly...8 Ribbon Assembly... 11 Platen Frame Assembly...14
More information12A-969D190 LC-215 (1997) Page 1 of 12 Cables And Pivot Shaft
12A-969D190 LC-215 (1997) Page 1 of 12 Cables And Pivot Shaft 12A-969D190 LC-215 (1997) Page 2 of 12 Cables And Pivot Shaft 1 746-0939 1 S 6 Spd. Cable Code: N Notates a new part (not 2 656-0613 1 S Pulley
More informationFor printer model: TG3 Series
RFID User Guide Parts List For printer model: TG3 Series PN: 9001227(A) Read this User Guide before and during usage of the above product. Keep this document handy for future reference. www.satoamerica.com
More informationOrdering parts and supplies
Ordering parts and supplies Parts Order replacement parts from the following website: http://www.hp.com/ssg/parts/direct_order.html Related documentation and software Order documentation and software from
More information8mm PrecisionPro (Green) DL Spliceable 7-13 Tape Feeder. T Rev. B hd This document supports assembly Rev. -
8mm PrecisionPro (Green) DL Spliceable Tape Feeder 8mm PrecisionPro (Green) DL Spliceable Tape Feeder 8mm PrecisionPro (Green) DL Spliceable Tape Feeder 8mm PrecisionPro (Green) DL Spliceable 7-13 Tape
More informationINSTRUCTION MANUAL AND PARTS LIST
7360R-2SS INSTRUCTION MANUAL AND PARTS LIST 1. COVER COMPONENTS Ref. No Part No. Name Qty 1 100 1400 Face plate arm 1 2 100 1401 Gasket 1 3 100 1287 Rubber plug (ɸ19) 1 4 100 1288 Rubber plug (ɸ11.8)
More informationETKA : Model. Restrictions. Illustration. Year EPIS 198. et_bild.frm
7 7-0 0:00 2.02.200 et_bild.frm EPIS 8 7 7-0 0:00 2.02.200 Pos Part Number Description Remark Qty cable tie retaining plate for cable - 4F0 7 850 cable tie + N 020 02 2 cable tie 3,6246MM () + N 020 04
More informationPower Rack with Lat Pull
Power Rack with Lat Pull BD-7 Owner's Manual VA0900 D SAFETY & PRECAUTIONS IMPORTANT: READ ALL PRECAUTIONS CAREFULLY BEFORE USING THIS PRODUCT. RETAIN OWNER'S MANUAL FOR FUTURE REFERENCE. Note: This item
More information5351 Series Printer Parts Information Manual
5351 Series Printer Parts Information Manual Pertech TM Pertech Resources Inc. 2009 220324 Rev.02 Page 1 Disclaimer Information in this document is subject to change without notice. Consult your Pertech
More informationContents Section 9, Illustrated Parts
Contents Section 9, Illustrated Parts Figures 9-1. Parts of RT7... 9-5 9-2. RT7 Drive Assembly... 9-9 9-3. RT7 Refrigeration System... 9-10 9-4. Parts of RT7 PLUS... 9-15 9-5. RT7 PLUS Drive Assembly...
More informationPSC300 Operation Manual
PSC300 Operation Manual Version 9.10 General information Prior to any attempt to operate this Columbia PSC 300, operator should read and understand the complete operation of the cubing system. It is very
More informationM SERIES DISPENSER M SERIES DISPENSER
M SERIES DISPENSER PART NUMBER 5006621 M SERIES DISPENSER M SERIES DISPENSER... M - 1 M15 TOP EXPLODED VIEW... M - 2 M15 TOP PARTS LIST... M - 3 M15 BASE EXPLODED VIEW... M - 4 M15 BASE PARTS LIST... M
More informationSPARE PARTS OVERVIEW.
SPARE PARTS OVERVIEW www.spiro.ch CONTENTS Contents Spare Parts Packages... 4 Silver Package...4 Tubeformer Packages - Formroller Units...5-8 Tubeformer Packages - Slitter Maintenance...9 Tubeformer Packages
More informationCambridge International Examinations Cambridge International General Certificate of Secondary Education
Cambridge International Examinations Cambridge International General Certificate of Secondary Education *5003676564* DESIGN AND TECHNOLOGY 0445/42 Paper 4 Systems and Control May/June 2015 1 hour Candidates
More informationTypical Roll Shutter Hood* Assembly
Typical Roll Shutter Hood* Assembly Override Motor * Various Hood sizes, styles & colors listed on Hurricane p34 Hurricane 26 website: www.easternmetal.com e-mail: info@easternmetal.com version: 11/05/13
More informationComputerized Cross Folder AFC-744A/744S. Computerized Cross Folder AFC-744A/744S. Computerized Cross Folder AFC-744A/744S
Major Specifications Automatic Set-up Patterns 4KTTL (4 Buckles+1st +2 Buckles Below +2nd ) /Pallet Feeder 738(W) x (L) mm (29.055" x 43.305") Max. Sheet Size with Round Pile Feeder 738(W) x 1,300(L) mm
More informationManual placement system MPL3100. for BGA, CSP and Fine-Pitch components
Manual placement system MPL3100 for BGA, CSP and Fine-Pitch components Part No: MPL3100BA1.0e Issue Date: 02/2001 You have opted for an ESSEMTEC MPL3100 pick and place system. We thank you for this decision
More informationAccessories for GF and RA machines
Accessories for GF and RA machines A BRAND OF ITW ORBITAL CUTTING & WELDING 21 Orbital cutting & beveling machines for high-purity process piping Accessories for GF and RA machines Saw blade lubricant
More informationHAXL-PNI-40 NEW DANA SERVICE KITS AND PARTS FOR MODELS BUILT ON OR AFTER JUNE 10, 2013 PART NUMBER INFORMATION DATE: August 15, 2013
HAXL-PNI-40 NEW DANA 170-190-590 SERVICE KITS AND PARTS FOR MODELS BUILT ON OR AFTER JUNE 10, 2013 PART NUMBER INFORMATION DATE: August 15, 2013 TO: All Dana Aftermarket Group Spicer Heavy Axle Customers
More informationTurret Replacement Instruction Manual
Automatic Multi-Satellite TV Antenna Turret Replacement Instruction Manual for models RPSKLGL, RPSKSML, SK-LG00, SK-SM00, & RP-SWM For help, email help@winegard.com or call -800-788-7 568 Raising the Antenna
More informationBriggs&Stratton 44Q B1
Accessories IPL, Briggs&Stratton 44Q777-1272-B1, 2010-03 Briggs&Stratton 44Q777-1272-B1 Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar 48 SHORT BLOCK 1329 REPLACMENT
More informationTRAINING. Manual. DVD-VCR COMBINATION Chassis : Kaiser SV-DVD440
AUX DVD-VCR COMBINATION Chassis : Kaiser SV-DVD440 ELECTRONICS TRAINING MANUAL SV-DVD440 TRAINING DVD-VCR COMBINATION Manual CONTENTS 1. Precautions 2. Reference Information 3. Product Specification 4.
More informationTECHNICAL BULLETIN CS 250ci/300ci400ci/500ci
TECHNICAL BULLETIN CS 250ci/300ci400ci/500ci SUBJECT: BULLETIN INDEX 02/11/11 SUBJECT: BULLETIN # NEW MODEL PRODUCT INFORMATION...1 MEASURE FOR DP-760 CIS CABLE CONNECTOR DAMAGE...2 CHANGE TO THE INSTALLATION
More informationTYPE ASR 650 / 850 FLAT LIST 1/3
TYPE ASR 650 / 850 FLAT LIST 1/3 TYPE ASR 650 / 850 FLAT LIST 1/3 NR. ARTICLECODE DESCRIPTION REMARKS 1 110006000.2 Fixation (grey) for antenna ASR 650 FLAT 1 110006004 Fixation (grey) for antenna ASR
More informationStationary Lifts Slings Spare Parts Accessories Spare Parts Tools
Spare Parts List 2013-04-03 Stationary Lifts Slings Spare Parts Accessories Spare Parts Tools Doc. No. 3EN800803-01 Changes made from previous version of the spare parts list: Page Product Pos. Prod No.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PARTS REQUIRED Parts in the box Single monitor Dual monitor M2 M8 M/Flex + (package contents will depend on configuration ordered) Tools required for installation 6.0 mm Hex Key
More informationTile saws - Masonry saws - Block saws
Tile saws - Masonry saws - Block saws www.goelz.de Tile saws NEW TS200/250 Professional tile cutting machines adjustable cutting length cutting head adjustable up to 45 (Jolly cutting) diamond blade Ø
More informationCM MTC PARTS LIST
8650 Enterprise Drive, Peosta IA 52068-0050 319-556-7484 / Fax 319-556-1235 CM-2400-0MTC PARTS LIST ENGINE OIL GRADE: ENGINE OIL CAPACITY: PUMP OIL: PUMP OIL CAPACITY: NOZZLE SIZE: 30W 21 oz. MI-T-M #AW-4085-0016
More informationHD Flex Patch Panel. ASSEMBLY VIEW (FLEX1UPN** shown) FS128B. CONTENTS: (#) indicates FLEX4UPN** quantity
HD Flex Patch Panel Part Numbers: FLEX1UPN**, FLEX2UPN**, FLEX4UPN** Panduit Corp. 2018 INSTALLATION INSTRUCTIONS Note: HD Flex Patch Panels are compatible with HD Flex Fiber System Components. HD Flex
More informationRevision 1.0 Parts List Mega
Revision.0 www.grindex.com Parts List 824.390 Mega Table of Contents Table of Contents Introduction... 2. Specially approved products... 2 2 Product Description...3 2. Products included... 3 2.2 The data
More informationAristoMig U320w 208/230/400/460/475/500 V 3~ 50/60 Hz With cooling unit and central connection
Spare parts list Edition 060727 Valid for serial no. 310 -xxx -xxx, 445 -xxx -xxx, 620 -xxx -xxx The AristoMig 450 power source is renamed: New name Old name Mig 4500i AristoMig 450 Mig U4500i AristoMig
More informationMechanical flow switch for On/Off control
Mechanical flow switch for On/Off control Economic integration in pipe systems without any additional piping Magnetic measuring principle Mechanical adjustment of setpoint Type 8010 can be combined with...
More informationHigh Performance DL-60 (Gold Plus) (7 in - 13 in) Dual Lane Spliceable Tape Feeder Part Number: Revision 3 Sep No.
8mm High Performance DL-60 (Gold Plus) (7 in - 13 in) Dual Lane Spliceable Tape Feeder Part Number: 50381212 Revision 3 Sep. 2010 No. 0730D-E043 Page i Table of Contents Functional Description...1 Procedures
More informationFlexible. Fast. Precise. PPU-E Pick & Place Unit
PPU-E Flexible. Fast. Precise. PPU-E Pick & Place Unit Compact 2-axis unit for a faster, flexible running of any curve on one plane. Field of Application For use in clean and slightly polluted environment.
More information98027-Body Posts 98037-Receiver Mount 98038-Battery Holder 98039-Battery Mount 98090-Adjustable Linkage (not include Extra Longer version ) 98091-Center Linkage 140*6.0mm(94880 /T2 T3 T6) 97002-Center
More informationProduct Data Sheet
Product Data Sheet www.moteck.com Actuator ID11 ID11 is designed for industrial applications, such as agricultural and construction machines. Comparing with ID1, the installation length of ID11 is 4mm
More informationFACT Cable Termination Unit
FACT Cable Termination Unit INSTALLATION INSTRUCTION FACT-GSS NOTE: - the FACT-GSS multi-purpose splice shelves features Single Circuit and Single Element fiber management system technology - these shelves
More informationAn Open-Ended Ball-Balancing Laboratory Project for Undergraduates
An Open-Ended Ball-Balancing Laboratory Project for Undergraduates Evencio A. Rosales, Bennett T. Ito, Katie A. Lilienkamp, and Kent H. Lundberg* Department of Mechanical Engineering *Department of Electrical
More informationUSA-20B METRIC OPERATION MANUAL & PARTS LISTS UM 062TW / 562TW
USA-20B METRIC OPERATION MANUAL & PARTS LISTS UM 062TW / 562TW TABLE OF CONTENTS TABLE OF CONTENTS... 1 SERVICE INSTRUCTIONS... 2 WARRANTY... 3 DESCRIPTION OF USA 20-SB... 4 SAFETY ISSUES... 5 SAFETY
More informationSeries 7400 Vaneaxial Fans Designs 7410, 7412, 7413 & 7416
Bulletin 7410-3 March 1996 Series 7400 Vaneaxial Fans Designs 7410, 7412, 7413 & 7416 Description Index Series 7400 Vaneaxial Fans The Northern Series 7400 Vaneaxial fan is one of the most rugged axial
More information03-Durchfuehren_RZ_0708_EN.qxd:03-Durchfuehren GB.qxd :06 Uhr Seite 200 Feed-through
Feed-through Feed-through FEED-THROUGH Series Size Page Rotary Feed-through for Robots DDF 202 DDF 031 206 DDF 040 208 DDF 040-1 210 DDF 050 212 DDF 050-1 214 DDF 063 216 DDF 080 218 DDF 080-1 220 DDF
More informationMDT3 and MDT4 Service Parts
This parts lists contains part numbers for the service parts available for the MDT and MDT4. They have been manufactured in both 60 Hz and 50 Hz models. The 60 Hz models are: MDTF-A or MDTFA-H MDT4F-A
More information16S151-16S181 16S221-16S251 Planetary Gear with HELICAL TEETH
400.195 ZF EcoSplit Models 16S151-16S181 16S221-16S251 Planetary Gear with HELICAL TEETH 04/2008 File ZFE0023.Pdf 1 Z.F. EcoSplit III 6S151 to 16S25 6S251 From 16S1 suitable to : Planetary Gear with HELICAL
More informationWID-DL74 WID-DL74 BLP WID. Designed for. Installation guide for workitdesk interactive table for. BrightLink Pro
WID-DL74 WID-DL74 BLP WID Designed for BrightLink Pro Installation guide for workitdesk interactive table BrightLink Pro for Mounting the table unit 1 Unpack boxes 1 of 4 (Mobile base) and 2 of 4 (Motorized
More informationParts and Maintenance Manual for GL50 Spiral Mixer
Parts and Maintenance Manual for GL50 Spiral Mixer WARRANTY TERMS Validity: The warranty starts from the delivery date and lasts 2 months, if: The mixer was not damaged during transportation, and it was
More informationBandall OPERATING INSTRUCTIONS
Bandall OPERATING INSTRUCTIONS SUPPLIER : Bandall international Marconiweg 9a 3442 AD Woerden The Netherlands Tel.: +31 348 431520 Fax: +31 348 431480 E-mail: info@bandall.com Internet: www.bandall.com
More informationSIMET AVIKO D INSTRUCTION MANUAL SORTING Solutions, Ltd.
SIMET AVIKO D INSTRUCTION MANUAL 1870 SORTING Solutions, Ltd. 1. TABLE OF CONTENTS 1. TABLE OF CONTENTS...1 2. INTRODUCTION...2 2.1. Application...2 2.2. Operating Conditions...2 2.3. Electro - Optical
More informationIncremental Rotary Encoders
Incremental Rotary Encoders Rotary Magnetic Incremental Encoder Encoders ELTRA are designed in order to control the position and the angular speed of moving mechanical axels. Rotary Incremental Eltra encoder
More informationTeam One Paper. Final Paper. Overall Strategy
Team One Paper Final Paper Overall Strategy Our Robot is controlled by a finite state machine structure. Each state has exit conditions which are checked periodically. When an exit condition is satisfied,
More informationChannel Cable Tray - Accessories
Splice Plate The Splice Plate has the standard 4-hole pattern for all cable channel. Provided with straight sections and fittings. 9(*)-1043 3 (76) 9(*)-1044 4 (101) 9(*)-1044-6 6 (152) Horizontal Adjustable
More informationMultifunction Table and HANSS with Biofeedback February 26, 2010 Weekly Presentation
Multifunction Table and HANSS with Biofeedback February 26, 2010 Weekly Presentation Team #1 Mark Galiette, Liz Hufnagel, Dan Tichon Client: Annalee Hughes Final Design Completed Work: o o HANSS 1. Mounting
More informationComputerized Cross Folder AFC-744AKTSC. Mobile Knife Fold Unit MKU-54/54T Press Stacker PST-40 Press Stacking & Semi-auto Bundling Unit TST-37
Mobile Knife Unit MKU-54/54T Stacker PST-40 Stacking & Semi-auto Bundling Unit TST-37 Automatic Set-up Patterns The B1-format folder is the newest in Horizon s expanding line-up of quality-engineered folders
More informationAUTOMATIC TAPING MACHINE INSTRUCTION MANUAL TAIYO SEIKI CO., LTD.
- AUTOMATIC TAPING MACHINE INSTRUCTION MANUAL TAIYO SEIKI CO., LTD. 1 Contents CONTENTS 1. Introduction... 2 1-1. Important safety notice...2 1-2. Precautions for use and installation...2 1-3. Operating
More informationFELIX3.1 assemblymanual
FELIX3.1 assemblymanual Assemblymanualfor: FELIX3.1Single FELIX3.1Dual copyrightinformation Thisdocumentcontainsproprietaryinformationthatisprotectedbycopyright. nopartofthisdocumentmaybephotocopied,reproduced,ortranslatedtoanotherlanguagewithoutthepriorwritenconsentoffelixroboticsbv.
More informationOperating Manual B 300
Greiner vibrograf A.G. Mittelstrasse 2 CH - 4900 Langenthal Switzerland Tel. ++41 62 923 44 33 Fax ++41 62 923 18 46 info@greinervibrograf.ch www.greinervibrograf.com B 300 MANUAL Operating Manual B 300
More information15.0 Overview Cross Connection Cabinet KVS Overview Polyester Production Cross Connection Cabinet Unicab Vario 8
15.0 Chapter-Content Page 15.0 Overview 2 15.1 KVS 3 15.2 Overview Polyester Production 7 15.3 Unicab Vario 8 23 15 http://www.krone-gmbh.at - Page 1 15.0 Overview KVS F3, KVS F4, KVS F5, KVS F6 Product
More informationHigh Performance (Gold Plus) Spliceable Tape Feeder Part Number: Part Number: Revision 3 Jun 2008 No.
8mm High Performance (Gold Plus) Spliceable Tape Feeder Part Number: 50934707 12mm High Performance (Gold Plus) Spliceable Tape Feeder Part Number: 50934807 Revision 3 Jun 2008 No. 0930D-E010 i Table
More informationCM MVC & CM MHC PARTS LIST
8650 Enterprise Drive, Peosta IA 52068 319-556-7484 / Fax 319-556-1235 CM-2400-0MVC & CM-2403-0MHC PARTS LIST (After Serial #215703) Vanguard Engine Oil Grade: Vanguard Engine Oil Capacity: Honda Engine
More informationOWNER'S MANUAL SIGNAL COMMANDER
OWNER'S MANUAL SIGNAL COMMANDER THIS MANUAL CONTAINS INSTRUCTIONS FOR: LPDA 200 - INSTALLATION - OPERATION - TROUBLESHOOTING - EXPLODED PARTS DRAWING - WARRANTY AntennaTek, Inc. 425 S. Bowen, #4 Longmont,
More informationVGA AUDIO SWITCHER S MANUAL
VGA AUDIO SWITCHER S MANUAL Milestone s VGA Audio Switcher is a unit whereby multiple (2/4/8/16) VGA + Audio can be switched to two (2) or multiple (simultaneous) VGA + Audio output. The switchers are
More informationSPECIAL TOOLS BULLETIN
SPECIAL TOOLS BULLETIN Title: MANDATORY VOLVO SPECIAL TOOL LIST Supersedes the November 16, 2009 edition. 1 of 12 Car Market: United States, Canada : YEAR MONTH DAY 2010 07 29 The following tools have
More informationButterfly Valve Retrofits
Butterfly Valve Retrofits Contents How to Select the Butterfly Retrofit Solution... pg 127 Butterfly Valve Retrofit Actuators... pg 128 Solutions for Specific Manufacturer and Part Number Apollo... pg
More informationSPIRAL MIXERS CONTENT CHAPTER 1 COMPANY BRIEF INTRODUCTION OPERATION INSTRUCTION
SPIRAL MIXERS OPERATION INSTRUCTION CONTENT CHAPTER 1 COMPANY BRIEF INTRODUCTION.....P1 CHAPTER 2 PRODUCTION INTRODUCTION.....P2 2.1 Machine trait........p2-3 2.2 Technical parameter.......p4-6 CHAPTER
More informationEZ Encoder : Optical Incremental
1. Introduction The EZ25 Encoder is a 2.5 incremental optical encoder, designed for optical shaft encoder motion control and precision sensor systems. Our ET7272 available models are short circuit proof
More informationOWNER'S MANUAL SIGNAL COMMANDER
OWNER'S MANUAL SIGNAL COMMANDER THIS MANUAL CONTAINS INSTRUCTIONS FOR: MOD 550 - INSTALLATION - OPERATION - TROUBLESHOOTING - EXPLODED PARTS DRAWING - WARRANTY AntennaTek, Inc. 425 S. Bowen, #4 Longmont,
More informationDDF-SE. Application example. Feed-through Stationary Rotary Feed-through. Max. speed 500 revs/ min. Air feed-through Up to 6x
DDF-SE www.comoso.com Sizes 080.. 120 Max. speed 500 revs/ min Air feed-through Up to 6x Electrical feed-throughs Up to 8x Application example Turning a component for laser welding or centrifugal drying
More informationThingMagic RFID Module INSTALLATION GUIDE. FOR CL e SERIES
ThingMagic RFID Module INSTALLATION GUIDE FOR CL e SERIES SATO International Pte Ltd 438A Alexandra Road #05-0/02 Alexandra Technopark Singapore 9967 Tel: (65) 627 222 Fax: (65) 627 25 Email: customerservice@sato-int.com
More informationENC-MC58SN-L R-L1
MC58/ MC59/ MC60 Hollow Shaft Magnetic Encoder Series FETURES DESCRIPTION Standard Encoder for Heavy Industrial pplications Hollow Shaft up to ø15mm 20 to 10,000 Cycles Per Revolution 80 to 40,000 Pulses
More informationMAXTECH, Inc. BRC-1000 Series. C-Band Redundant LNB Systems. Technology for Communications. System Block Diagrams
MAXTECH, Inc. Technology for Communications BRC-1000 Series C-Band Redundant LNB Systems Introduction Redundant LNB systems minimize system downtime due to LNB failure by providing a spare LNB and an automatic
More informationCARESTREAM VITA/VITA LE/VITA SE CR System Long Length Imaging User Guide
CARESTREAM VITA/VITA LE/VITA SE CR System Long Length Imaging User Guide Use of the Guide Carestream CR Systems are designed to meet international safety and performance standards. Personnel operating
More informationINSTALLATION INSTRUCTIONS OWNERS COPY
Axess Pro Series 3100 Industrial Roller Shutter Opener Featuring TrioCode Technology Technical Document Installation Manual v1.11 14 Dec 2011 English INSTALLATION INSTRUCTIONS OWNERS COPY Part # 13296
More informationPARTS LIST ERSATZTEILLISTE LISTE DE PIECES
MBS-708CS Metal Working Bandsaw 50000331T 400/50/1 PARTS LIST ERSATZTEILLISTE LISTE DE PIECES WMH Tool Group AG Bahnstrasse 24, CH 8603 Schwerzenbach www.wmhtoolgroup.ch; info@wmhtoolgroup.ch Tel +41 (0)
More informationReference Manual. Notes 9/16 Series H
Reference Manual Notes 9/16 Series 173.01H Copyright notice The information in this document is subject to change without prior notice and does not represent a commitment on the part of Q-MATIC AB. All
More informationService Parts Diagrams. For Model: 10/20/09 Service Parts Diagrams for the Rear Projection SMART Board 3000i-DV Interactive Whiteboard 1
Service Parts Diagrams For Model: 000i-DV with the serial NEC MT060 numbers Serial greater numbers than 000 000i-DV-09000 to 0999 0/0/09 Service Parts Diagrams for the Rear Projection SMART Board 000i-DV
More informationCommissioning Lock Issues:
Commissioning Lock Issues: Reminder I: Scope and goals Reminder II: The design Transforming a virtual world to reality Reality strikes How to adopt reality? Preparations for 3 string cable arm Béla Majorovits
More informationBelts ITEM DESCRIPTION FITS MACHINES
Belts PDG.83226.50 4 Row Belt PDG 8000P (propane) PDG.83226.30 3 Row Belt PDG 8000P (propane) PDG.83226.00 Belt, 3/3VP 450 GATES PDG 8000P (propane) PDG.80039.00 Belt, PK21 Bottom PDG 8000 PDG.80040.00
More informationCE6000 SERIES USER S MANUAL CUTTING PLOTTER MANUAL NO.CE6000U-UM-152
CE6000 SERIES CUTTING PLOTTER USER S MANUAL MANUAL NO.CE6000U-UM-152 TO ENSURE SAFE AND CORRECT USE To ensure the safe and correct use of your plotter, read this manual thoroughly prior to use. After reading
More informationIMCFW-350 FLOW WRAPPER MACHINE
IMCFW-350 FLOW WRAPPER MACHINE INTERNATIONAL MACHINE CONCEPTS WELCOMES YOU TO YOUR NEW MACHINE Operation Manual: Date 2018 CONTENTS Chapter 1 Machine Description 1.1 Uncrating Instructions 1.2 Installation
More informationA wireless turntable for new way of enjoying vinyl records
Bluetooth Turntable TN-280BT 2-speed Analog Turntable with Phono EQ and Bluetooth A wireless turntable for new way of enjoying vinyl records Main Features 2-speed Belt-drive turntable Built-in MM phono
More information414 P 1. DESCRIPTION AND TECHNICAL SPECIFICATIONS 2. LAY-OUT OF STANDARD SYSTEM INSTALLATION DIMENSIONS. Fig. 1. Fig. A
1 414 P The 414 P automated system for swing leaf gates is an electromechanical operator which transmits motion to the leaf by a worm-screw system. It is a self-locking automatic system equipped with a
More informationStep 1. 2x Kep Nut 1x Left Motor Assembly
Start with the build completed in Lesson 3 of the TETRIX Getting Started Guide. Steps 1 to 3 involve removing elements from the model. These elements will be reattached later. Parts to be Removed Step
More informationOWNER'S MANUAL SIGNAL COMMANDER
OWNER'S MANUAL SIGNAL COMMANDER THIS MANUAL CONTAINS INSTRUCTIONS FOR: LPDA 100 - INSTALLATION - OPERATION - TROUBLESHOOTING - EXPLODED PARTS DIAGRAM - WARRANTY AntennaTek, Inc. 425 S. Bowen, # 4 Longmont,
More informationCosmos2 The Economical X-ray Solution with the Best Image Quality and High Reliability
Cosmos2 The Economical X-ray Solution with the Best Image Quality and High Reliability 1 The Cosmos2 enables image recording of patients who are standing, seated or recumbent. The Universal X-ray System
More informationCC-M12 and CC-M48 Series Controllers Model No. CC-M12-M48
Form No. 380-0052 Rev A CC-M12 and CC-M48 Series Controllers Model No. CC-M12-M48 Register at www.toro.com. Original Instructions (EN) *380-0052* A Ordering Replacement Parts To order replacement parts,
More informationOWNER S MANUAL MOTORIZED 7 WIDE TFT LCD COLOR MONITOR CNT-701
OWNER S MANUAL PW MOTORIZED 7 WIDE TFT LCD COLOR MONITOR CNT-701 ANY CHANGES OR MODIFICATIONS IN CONSTRUCTION OF THIS UNIT DEVICE WHICH IS NOT APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIACE COULD VOID
More informationRevision 1.0 Parts List Minor
Revision.0 www.grindex.com Parts List 803.8 Minor Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 The data plate...3 Parts... 4 Exploded view...
More informationRevision 1.0 Parts List Salvador 1~, 3~
Revision.0 www.grindex.com Parts List 809.8 Salvador ~, 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 The data plate...3 Parts... 4 Exploded
More informationList of standard components
1 Standard components BOWL FEEDER DRIVE Conveying direction counterclockwise Conveying direction clockwise RF20 L 1-000697 Round conveyor drives, Ø 200 mm, 50 Hz, center clamping RF30 L 1-000689 Round
More informationSeries SM ø12 mm. Inductive Position Transducer. ranges mm. linearity 0,2/0,3% ø12 mm, clamp-ø8 mm h6. out: AC, V, V, 4...
LVDT Inductive Position Transducer Series SM ø12 mm ranges 2...200 mm linearity 0,2/0,3% ø12 mm, clamp-ø8 mm h6 out: AC, 0...10 V, 0...5 V, 4...20 ma with external or integrated cable electronics repeatability
More informationINSTALLATION MANUAL FOR THE TIMING LIGHT
INSTALLATION MANUAL FOR THE TIMING LIGHT May 12 2014 SPORTS SPLIT STEP 12566 LAZY ACRES CRT NEVADA CITY, CA 95959 www.sports-split-step.com vicborg70@gmail.com 530-272-7345 1 1. The installation of the
More informationAbsolute encoders multiturn
The Sendix multiturn encoders 5868 and 5888 with CANopen or CANopenift interface and optical sensor technology are the right encoders for all CANopen or CANopenift applications. With a maximum resolution
More informationI OPERATING PRECAUTIONS
I OPERATING PRECAUTIONS Please place the turntable on a horizontal support free of vibrations. For prevention of acoustical feedback, the speakers must be placed a sufficient distance from the turntable.
More informationHigh-powered & Heavy duty
High-powered & Heavy duty More Than Productivity KA16 Angle Grinder / Sander Powerful 1600 Watts 25 models for all applications 2,000 hours guaranteed MTBM* Ergonomic accessories included Productivity
More informationChallenges. TETRIX Getting Started Guide STEM Challenge Building Guide. Step 1. Parts Needed. Tips
Note: The Arm and Gripper Extension has been recommended as an initial build to complete the STEM Challenge. The STEM Challenge Sample Program and Programming Guide have been created to work effectively
More informationPARTS LIST FOR CM-1250-A/C 1.5 HP
8650 Enterprise Drive, Peosta IA 52068 563-556-7484 / Fax 563-556-1235 PARTS LIST FOR CM-1250-A/C Motor Specs: Pump Oil: Pump Oil Capacity: Nozzle Size: 1.5 HP / 1 Phase / 115 Volts Mi-T-M #AW-4085-0016
More information