LED TV. user manual. Still image warning. Securing the Installation Space. xif you use parts provided by another manufacturer, it may result in a

Transcription

1 LED TV user manual Figures and illustrations in this User Manual are provided for referene only and may differ from atual produt appearane. Produt design and speifiations may be hanged without notie. Still image warning Avoid displaying still images (suh as jpeg piture files) or still image elements (suh as TV hannel logos, panorama or 4:3 image format, stok or news bars at sreen bottom et.) on the sreen. Constant displaying of still pitures an ause ghosting of LED sreen, whih will affet image quality. To redue risk of this effet, please follow below reommendations: Avoid displaying the same TV hannel for long periods. Always try to display any image on full sreen, use TV set piture format menu for best possible math. Redue brightness and ontrast values to minimum required to ahieve desired piture quality, exeeded values may speed up the burnout proess. Frequently use all TV features designed to redue image retention and sreen burnout, refer to proper user manual setion for details. Seuring the Installation Spae Keep the required distanes between the produt and other objets (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the produt due to an inrease in the internal temperature of the produt. When using a stand or wall-mount, use parts provided by Samsung Eletronis only. xif you use parts provided by another manufaturer, it may result in a problem with the produt or an injury due to the produt falling. The appearane may differ depending on the produt. Be areful when you ontat the TV beause some parts an be somewhat hot. Contat SAMSUNG WORLDWIDE If you have any questions or omments relating to Samsung produts, please ontat the SAMSUNG ustomer are enter. Country Customer Care Center Web Site MEXICO SAMSUNG( ) ARGENTINA BRAZIL CHILE 800-SAMSUNG( ) COLOMBIA COSTA RICA DOMINICA ECUADOR EL SALVADOR GUATEMALA HONDURAS JAMAICA NICARAGUA PANAMA PERU PUERTO RICO TRINIDAD & TOBAGO SAMSUNG( ) VENEZUELA Installation with a stand. 4inhes 4inhes 4inhes Installation with a wall-mount. 4inhes 4inhes 4inhes 4inhes (MEXICO Only) IMPORTADO POR: SAMSUNG ELECTRONICS MÉXICO S.A. de C.V. AV. PRESIDENTE MASARIK #111 INT701 COL. CHAPULTEPEC MORALES C.P DELEGACION MIGUEL HIDALGO MEXICO. DISTRITO FEDERAL Tel: / BN D

2 Getting Started Aessories Remote Control & Batteries (AAA x 2) Warranty Card / Safety Guide Wire-Holder Stand Input Cables (Sold Separately) RS232 Audio HDMI HDMI-DVI Chek the able before plug-in HDMI USB Optial Cable Owner s Instrutions Power Cord Component Composite (AV) Coaxial (RF) Ports When seleting the funtion by moving the ontroller to the up/down/left/ right diretions, be sure not to press the ontroller. If you press it first, you annot operate it to move the up/down/left/right diretions. Plug & Play (Initial Setup) When you turn the TV on for the first time, a sequene of on-sreen prompts will assist in onfiguring basi settings. Press the POWER button. Plug & Play is available only when the Input soure is set to TV. Conneting the power ord and antenna. (refer to Connetions ) Selet Language of the OSD. Language Plug & Play Seleting a language English Español Français U Move E Enter Selet the desired OSD (On Sreen Display) language. Seleting a Home Use mode Do not plug able upside down. Be sure to hek before plug-in. TV Controller (Panel Key) Funtion menu MEDIA.P m R P Return TV Controller Plug & Play Selet Home Use when installing this TV in your home. Store Demo Plug & Play Selet the Antenna soure to memorize. Air Home Use L Move E Enter Selet the Home Use mode. Store Demo mode is for retail environments. When pressing TV ontroller, the funtion menu sreen appears. Selet the MENU(m) and press it more than 5 seonds using the ontroller. The Store Demo mode is set. Canel the Store Demo by seleting Soure List(s) and pressing it more than 5 seonds. Seleting an antenna Start In Cable mode, you an selet the orret signal soure among STD, HRC, and IRC by pressing the,, or button. Cable Start Power on Adjusting the volume Seleting a hannel Using the funtion menu Remote ontrol sensor Turns the TV on by pressing the ontroller in standby mode. Adjusts the volume by moving the ontroller from side to side when the power is on. Selets a hannel by moving the ontroller up and down when the power is on. Press the ontroller when the power is on, then the funtion menu sreen appears. If you press it again, the funtion menu sreen disappears. Auto Plug & Play Set the Clok Mode. Clok Mode Start U Move E Enter m Skip Setting the Clok Mode : Auto E Enter m Skip Set the Clok Mode automatially or manually. If you selet the Auto, set the DST(Daylight Saving Time). On the DST sreen, press ENTERE, then selet whether to turn DST (Daylight Savings Time) on or off. Selet the time zone where you live. Viewing the HD Connetion Guide Seleting the Media Play Seleting the MENU (m) Seleting the Soure List (s) Power Off (P) Selets the MEDIA.P by moving the ontroller in the funtion menu sreen. The Media Play main sreen appears. Selets the MENU(m) by moving the ontroller in the funtion menu sreen. The OSD(On Sreen Display) of your TV s feature appears. Selets the Soure List (s) by moving the ontroller in the funtion menu sreen. The Soure List sreen appears. Selets the Power Off (P) to turn the TV off by moving the ontroller in the funtion menu sreen. Exits the menu when pressing the ontroller more than 1 seond. The onnetion method for the best HD sreen quality is displayed. Enjoy your TV. Press the ENTERE button

3 Connetions y For better piture and audio quality, onnet to a digital devie using an HDMI able. y The piture may not display normally (if at all) or the audio may not work if an external devie that uses an older version of HDMI mode is onneted to the TV. If suh a problem ours, ask the manufaturer of the external devie about the HDMI version and, if out of date, request an upgrade. y Be sure to purhase a ertified HDMI able. Otherwise, the piture may not display or a onnetion error may our. y PC(D-Sub) and PC/DVI AUDIO IN input are not supported. y For HDMI/DVI able onnetion, you must use the HDMI IN 1(DVI) jak. y Conneting through the HDMI able may not be supported depending on the PC. y If an HDMI to DVI able is onneted to the HDMI IN 1(DVI) port, the audio does not work. y EX-LINK: Connetor for servie only. AV Devie (1) Using a HDMI Cable (up to 1080p) HDMI OUT Power Input y The side panel may differ depending on the model. Blu-ray player / DVD / able box / sat box TV Side Panel DVI OUT HDMI OUT TV Rear Panel Audio Devie (1) Using an Audio (Analog) Cable PC R W AUDIO IN R-AUDIO-L DVD / Home Theater PC Using a HDMI (to DVI) Cable VHF/UHF Antenna Media Play Using a USB Drive R W RY R W R B RG or ANT OUT Cable R W Y R W R B RG AV Devie (2) Using an Audio/Video AV Devie (3) Using a Component Cable (up to 1080p) Audio Devie (2) Using an Optial (Digital) Cable AUDIO OUT VIDEO OUT AUDIO OUT COMPONENT OUT OPTICAL R-AUDIO-L R-AUDIO-L PR PB Y Changing the Input Soure Soure List Use to selet TV or an external input soure suh as a DVD player / Blu-ray player / able box / STB satellite reeiver. 1. Press the SOURCE button. 2. Selet a desired external input soure. TV / AV / Component / HDMI1/DVI / HDMI2 You an only hoose external devies that are onneted to the TV. In the Soure List, onneted inputs will be highlighted. How to use Edit Name Edit Name lets you assoiate a devie name to an input soure. To aess Edit Name, press the TOOLS button in Soure List. The following seletions appear under Edit Name: VCR Blu-ray player Digital Audio System VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Reeiver / Game / Camorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray / HD DVD / DMA: Name the devie onneted to the input jaks to make your input soure seletion easier. When onneting a PC to the HDMI IN 1(DVI) port with HDMI able, you should set the TV to PC mode under Edit Name. When onneting a PC to the HDMI IN 1(DVI) port with HDMI to DVI able, you should set the TV to DVI PC mode under Edit Name. When onneting an AV devies to the HDMI IN 1(DVI) port with HDMI to DVI able, you should set the TV to DVI mode under Edit Name. Information You an see detailed information about the onneted external devie

4 Remote Control This remote ontrol has Braille points on the Power, Channel, and Volume buttons and an be used by visually impaired persons. Displays and selets the available video soures. Turns the TV on and off. Press to diretly aess to hannels. Turns the remote ontrol light on or off. When on, the buttons beome illuminated for a moment when pressed. (Using the remote ontrol with this button set to On will redue the battery usage time.) Press to selet additional hannels (digital) being broadasted by the same station. For example, to selet hannel 54-3, press 54, then press - and 3. Returns to the previous hannel. Cuts off the sound temporarily. Adjusts the volume. Changes hannels. Displays the hannel list on the sreen. Displays the main on-sreen menu. Views the Media Play. Quikly selet frequently used funtions. MEDIA.P SLEEP Automatially shuts off the TV at a preset time. Displays information on the TV sreen. Selets the on-sreen menu items and hanges the values seen on the menu. Returns to the previous menu. Exit the menu. P.SIZE: Lets you hoose the piture size. MTS: Press to hoose stereo, mono or Separate Audio Program (SAP broadast). CC: Controls the aption deoder. Use these buttons aording to the diretion on sreen. Use these buttons in a speifi feature. Display Modes (HDMI/DVI Input) Optimal resolution 4000 series:1366 x 768@60Hz / 5000 series: 1920 x 1080@60Hz Installing batteries (Battery size: AAA) Mode IBM MAC VESA DMT Horizontal Pixel Clok Syn Vertial Resolution Frequeny Frequeny Polarity 1366 x x 1080 Frequeny (Hz) (KHz) (MHz) (H / V) 640 x ,469 70,086 25,175 +/- 720 x ,469 70,087 28,322 -/+ 640 x ,000 66,667 30,240 -/- 832 x ,726 74,551 57,284 -/ x ,681 75, ,000 -/- 640 x ,469 59,940 25,175 -/- 640 x ,861 72,809 31,500 -/- 640 x ,500 75,000 31,500 -/- 800 x ,879 60,317 40,000 +/+ 800 x ,077 72,188 50,000 +/+ 800 x ,875 75,000 49,500 +/ x ,363 60,004 65,000 -/ x ,476 70,069 75,000 -/ x ,023 75,029 78,750 +/ x ,500 75, ,000 +/ x ,000 60,000 74,250 +/ x ,702 59,810 83,500 -/ x ,981 60, ,000 +/ x ,976 75, ,000 +/ x ,712 59,790 85,500 +/ x ,935 59, ,500 -/ x 900RB 60,000 60, ,000 +/ x ,290 59, ,250 -/ x ,500 60, ,500 +/+ NOTE xuse the remote ontrol within 23 feet from TV. x Avoid use when nearby fluoresent lights or neon signs. xthe Color and shape may vary depending on the model. Bright light may affet the performane of the remote ontrol

5 Channel Menu Seeing Channels Channel List Add, delete or set Favorite hannels and use the program guide for digital broadasts. Selet a hannel in the All Channels, Added Channels, Favorite or Programmed sreen by pressing the / buttons, and pressing the ENTERE button. Then you an wath the seleted hannel. Added Channels Air 6 Air 6-1 TV #6 7-1 TV #7 8 Air 9 Air 9-1 TV #9 10 Air 10-1 TV # TV #11 ' Zoom ' Selet T Tools Next Program All Channels: Shows all urrently available hannels. Added Channels: Shows all added hannels. * Favorite: Shows all favorite hannels. Programmed: Shows all urrently reserved programs. Using the remote ontrol buttons with the Channel List xgreen (Zoom): Enlarges or shrinks a hannel number. x Yellow (Selet): Selets multiple hannel lists. Selet desired hannels and press the Yellow button to set all the seleted hannels at the same time. The mark appears to the left of the seleted hannels. xt (Tools): Displays the Channel List option menu. (The Options menus may differ depending on the situation.) Channel Status Display ions Ions A hannel seleted. * A hannel set as a Favorite. ) A reserved program. Operations ( A program urrently being broadast. Memorizing hannels Antenna (Air / Cable) t Before your television an begin memorizing the available hannels, you must speify the type of signal soure that is onneted to the TV (i.e. an Air or a Cable system). How to Stop Auto Programming 1. Press the ENTERE button. 2. A message will ask Stop Auto Program? Selet Yes by pressing the or button. 3. Press the ENTERE button. Other Features Clear Srambled Channel This funtion filters out srambled hannels after Auto Program is ompleted. This proess may take up to 20~30 minutes. Press the ENTERE button to stop the Clear Srambled Channel. This funtion is only available in Cable mode. Channel List Channel List Option Menu t Set eah hannel using the Channel List menu options. Option menu items may differ depending on the hannel status. Add / Delete: Delete or add a hannel to display the hannels you want. All deleted hannels will be shown on the All Channels menu. A gray-olored hannel indiates the hannel has been deleted. The Add menu only appears for deleted hannels. Delete a hannel from the Added Channels or Favorite menu in the same manner. Add to Favorite / Delete from Favorite t: Set hannels you wath frequently as Favorites. Timer Viewing: You an set a desired hannel to be displayed automatially at the set time; even when you are wathing another hannel. Set the urrent time first to use this funtion. Only memorized hannels an be reserved. Reserved programs will be displayed in the Programmed menu. When a digital hannel is seleted, press the (Next Program) button to view the digital program. If you selet the ENTERE(Shedule) button on the next program, you an set Timer Viewing diretly. Channel Name Edit (analog hannels only): Assign your own hannel name. Selet All: Selet all the hannels in the hannel list. Deselet All: Deselet all the seleted hannels. You an only selet Deselet All when one or more hannels are seleted. Auto Program: Sans for a hannel automatially and stores in the TV. Auto Program When seleting the Cable TV system: Selets the able Programmed system. STD, HRC and IRC identify various types of able (in Channel List) TV systems. Contat your loal able ompany to identify the You an view, modify or delete a show you have reserved to wath. type of able system that exists in your partiular area. At this point, the signal soure has been seleted. Change Info: Change a show you have reserved to wath. After all the available hannels are stored, it starts to Canel Shedules: Canel a show you have reserved to wath. remove srambled hannels. The Auto program menu then Information: Display a show you have reserved to wath. (You reappears. an also hange the reservation Information.) Press the ENTERE button to stop the hannel store during Selet All / Deselet All: You an selet or deselet all hannels Auto Program. in the hannel list

6 Channel Mode Change the hannel mode diretly between Added Channels and Favorite Channels. The Favorite Channels is enabled only when you set Add to Favorite. Fine Tune (analog hannels only) If the reeption is lear, you do not have to fine tune the hannel, as this is done automatially during the searh and store operation. If the signal is weak or distorted, fine tune the hannel manually. Fine tuned hannels that have been saved are marked with an asterisk * on the right-hand side of the hannel number in the hannel banner. To reset the fine-tuning, selet Reset. Piture Menu Mode t Selet your preferred piture type. When onneting a PC, you an only selet Entertain and Standard. Dynami: Suitable for a bright room. Standard: Suitable for a normal environment. Movie: Suitable for wathing movies in a dark room. Entertain: Suitable for wathing movies and games. Only available when onneting a PC. Baklight / Contrast / Brightness / Sharpness / Color / Tint (G/R) Your television has several setting options for piture quality ontrol. When onneting a PC, you an only make hanges to Baklight, Contrast, Brightness and Sharpness Advaned Settings (available in Standard / Movie mode) Compared to previous models, new Samsung TVs have a more preise piture. When onneting a PC, you an only make hanges to Gamma and White Balane. Color Spae (Auto / Native): Adjusts the range of olors available to reate the image. White Balane: Adjusts the olor temperature for a more natural piture. R-Offset / G-Offset / B-Offset: Adjusts eah olor s (red, green, blue) darkness. R-Gain / G-Gain / B-Gain: Adjusts eah olor s (red, green, blue) brightness. Reset: Resets the White Balane to it s default settings. Gamma: Adjusts the primary olor intensity. Dynami Contrast (Off / Low / Medium / High): Adjusts the sreen ontrast. Blak Tone (Off / Dark / Darker / Darkest): Selet the blak level to adjust the sreen depth. Flesh Tone: Emphasize pink flesh tone. Motion Lighting (Off / On): Redue power onsumption by brightness ontrol adapted motion. Available in Standard mode only. Piture Options When onneting a PC, you an only make hanges to the Color Tone, Size and HDMI Blak Level. Color Tone (Cool / Standard / Warm1 / Warm2) Warm1 or Warm2 will be deativated when the piture mode is Dynami. Size: Your able box/satellite reeiver may have its own set of sreen sizes as well. However, we highly reommend you use 16:9 mode most of the time. 16:9: Sets the piture to 16:9 wide mode. Zoom1: Use for moderate magnifiation. Zoom2: Use for a stronger magnifiation. Wide Fit: Enlarges the aspet ratio of the piture to fit the entire sreen. 4:3: Sets the piture to basi (4:3) mode. Do not wath in 4:3 format for a long time. Traes of borders displayed on the left, right and enter of the sreen may ause image retention (sreen burn) whih are not overed by the warranty. Sreen Fit (DTV): Displays the full image without any ut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted. HD (High Definition): 16:9-1080i/1080p (1920x1080), 720p (1280x720) Settings an be adjusted and stored for eah external devie you have onneted to an input on the TV. Piture Sizes available by Input Soure: Input Soure Piture Size ATV, AV, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3 DTV(1080i, 1080p), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p) 16:9, Wide Fit, 4:3, Sreen Fit Digital Noise Filter (Off / Low / Medium / High / Auto): If the broadast signal reeived by your TV is weak, you an ativate the Digital Noise Filter feature to redue any stati and ghosting that may appear on the sreen. When the signal is weak, try other options until the best piture is displayed. HDMI Blak Level (Normal / Low): Selets the blak level on the sreen to adjust the sreen depth. Available only in HDMI mode (RGB signals). Film Mode (Off / Auto): Sets the TV to automatially sense and proess film signals from all soures and adjusts the piture for optimum quality. Available in ATV, DTV(interlae), AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i). LED Motion Plus (Off / On): Removes drag from fast senes with a lot of movement to provide a lear piture. Piture Reset Resets your urrent piture mode to its default settings. Reset Piture Mode: Returns all piture values in the urrently seleted mode to the default settings

7 Sound Menu Mode t Standard: Selets the normal sound mode. Musi: Emphasizes musi over voies. Movie: Provides the best sound for movies. Clear Voie: Emphasizes voies over other sounds. Amplify: Inrease the intensity of high-frequeny sounds to allow a better listening experiene for the hearing impaired. Equalizer (standard sound mode only) Balane L/R: Adjusts the balane between the right and left speaker. 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): Adjusts the level of speifi bandwidth frequenies. Reset: Resets the equalizer to its default settings. SRS TruSurround HD (standard sound mode only) SRS TruSurround HD is a patented SRS tehnology that solves the problem of playing 5.1 multihannel ontent over two speakers. TruSurround delivers a ompelling, virtual surround sound experiene through any two-speaker playbak system, inluding internal television speakers. It is fully ompatible with all multihannel formats. Preferred Language (digital hannels only) Digital-TV broadasts are apable of simultaneous transmission of many audio traks (for example, simultaneous translations of the program into foreign languages). You an only selet a language from among the ones being broadasted. Multi-Trak Sound (MTS) (analog hannels only) Mono: Choose for hannels that are broadasting in mono or if you are having diffiulty reeiving a stereo signal. Stereo: Choose for hannels that are broadasting in stereo. SAP: Choose to listen to the Separate Audio Program, whih is usually a foreign-language translation. Depending on the program being broadast, you an listen to Mono, Stereo or SAP. Auto Volume Beause eah broadasting station has its own signal onditions, the volume may flutuate eah time hannel is hanged. This feature lets you automatially adjust the volume of the desired hannel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. SPDIF Output The SPDIF (Sony Philips Digital InterFae) outputs an unompressed digital audio signal when you onnet the digital audio jak on the bak of the TV to a digital audio in jak on a reeiver or home theater. Audio Format: You an selet the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF) format may differ depending on the input soure. By onneting the TV to a reeiver or home theater with Dolby Digital and 5.1h speakers and seleting Dolby Digital, you an maximize your interative 3D sound experiene Audio Delay: Lets you orret timing mismathes between the audio trak and the video when you are wathing the TV and listening to digital audio output from the TV through an external devie suh as an AV reeiver. When you selet Audio Delay, a slider appears. Use the left and right arrow buttons to adjust the slider. Press ENTERE when done (0ms ~ 250ms). Speaker Selet Speaker Selet (External Speaker / TV Speaker): If you are listening to the sound trak of a broadast or movie through an external reeiver, you may hear a sound eho aused by the differene in deoding speed between the TV s speakers and the speakers attahed to your audio reeiver. If this ours, set the TV to External Speaker. When you set Speaker Selet to External Speaker, the TV s speakers are turned off. You will hear sound through the external speakers only. When you set Speaker Selet to TV Speaker both the TV s speakers and the external speakers are on. You will hear sound through both. When Speaker Selet is set to External Speaker, the VOLUME and MUTE buttons will not operate and the sound settings will be limited. If there is no video signal, both the TV s speakers and the external speakers will be mute. Sound Reset Reset All: Resets all sound settings to the fatory defaults. Setup Menu Setting the Time Time The urrent time will appear every time you press the INFO button. Clok: Setting the lok is for using various timer features of the TV. If you disonnet the power ord, you have to set the lok again. Clok Mode: Set the urrent time manually or automatially. Clok Set: Set the Month, Day, Year, Hour, Minute and am/pm. Available only when Clok Mode is set to Manual. Time Zone: Selet your time zone. DST (Daylight Saving Time): Swithes the DST (Daylight Saving Time) funtion on or off. DST and Time Zone funtion is only available when the Clok Mode is set to Auto. Sleep Timer t Automatially shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). To anel the Sleep Timer, selet Off. Timer 1 / Timer 2 / Timer 3 Three different on / off timer settings an be made. You must set the lok first. On Time / Off Time: Set the hour, minute, am/pm and Ativate / Inativate. (To ativate the timer with the setting you have hosen, set to Ativate.) Volume: Set the desired volume level.

8 Contents: When the On Time is ativated, you an turn on a speifi hannel or play bak ontents suh as photo or audio files. - TV/USB: Selet TV or USB. (Make sure that an USB devie is onneted to your TV.) - Antenna: Displays the urrent antenna soure. - Channel: Selet the desired hannel. - Musi/Photo: Selet the folder ontaining MP3/JPEG files on the USB devie. The maximum displayed number of files, inluding sub folders, in one folder of USB storage devie is The media may not be playing smoothly when using the devie lower than USB 2.0. Repeat: Selet One, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you onveniene. If you selet Manual, you an set up the day you want to ativate the timer. Other Features Program Rating Lok The Program Rating Lok feature automatially loks out programs that are deemed inappropriate for hildren. The user must enter a PIN (personal identifiation number) before any of the Program Rating Lok restritions are set up or hanged. Program Rating Lok is not available in HDMI or Component mode. The default PIN number of a new TV set is Program Rating Lok: You an blok rated TV Programs. TV Parental Guidelines: You an blok TV programs depending on their rating. This funtion allows you to ontrol what your hildren are wathing. MPAA Rating: You an blok movies depending on their MPAA rating. The Motion Piture Assoiation of Ameria(MPAA) has implemented a rating system that provides parents or guardians with advaned information on whih films are appropriate for hildren. Canadian English: You an blok TV programs depending on their Anglophone Canadian. Canadian Frenh: You an blok TV programs depending on their Frenh Canadian rating. Downloadable U.S. Rating: Parental restrition information an be used while wathing DTV hannels. Change PIN: The Change PIN sreen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN. Re-enter the same 4 digits in Confirm New PIN. When the Change PIN sreen disappears, press the OK button. The TV has memorized your new PIN. If you forget the PIN, press the remote-ontrol buttons in the following sequene, whih resets the pin to : POWER (off) MUTE POWER (on) Language Set the menu language. Choose between English, Español and Français. Game Mode When onneting to a game onsole suh as PlayStation or Xbox, you an enjoy a more realisti gaming experiene by seleting the game menu. Preautions and limitations for game mode xto disonnet the game onsole and onnet another external devie, set Game Mode to Off in the setup menu. xif you display the TV menu in Game Mode, the sreen shakes slightly Game Mode is not available when the input soure is set to TV. After onneting the game onsole, set Game Mode to On. Unfortunately, you may notie redued piture quality. Caption (On-Sreen Text Messages) Caption: You an swith the aption funtion on or off. If aptions are not available, they will not be displayed on the sreen. The Caption feature does not work in Component or HDMI mode. Caption Mode: You an selet the desired aption mode. Default / CC1~CC4 / Text1~Text4: (analog hannels only) The Analog Caption funtion operates in either analog TV hannel mode or when a signal is supplied from an external devie to the TV. (Depending on the broadasting signal, the Analog Caption funtion may or may not work with digital hannels.) Default / Servie1~Servie6 / CC1~CC4 / Text1~Text4: (digital hannels only) The Digital Captions funtion works with digital hannels. Servie1~6 may not be available in digital aption mode depending on the broadast. Digital Caption Options: (digital hannels only) Size: Options inlude Default, Small, Standard and Large. The default is Standard. Font Style: Options inlude Default and Styles 0 to 7. The default is Style 0. Foreground Color: Options inlude Default, White, Blak, Red, Green, Blue, Yellow, Magenta and Cyan. You an hange the olor of the letter. The default is White. Bakground Color: Options inlude Default, White, Blak, Red, Green, Blue, Yellow, Magenta and Cyan. You an hange the bakground olor of the aption. The default is Blak. Foreground Opaity: This adjusts the opaity of text. Options inlude Default, Transparent, Transluent, Solid and Flashing. Bakground Opaity: This adjusts the opaity of the aption bakground. Options inlude Default, Transparent, Transluent, Solid and Flashing. Return to Default: This option sets eah Size, Font Style, Foreground Color, Bakground Color, Foreground Opaity and Bakground Opaity to its default. Digital Caption Options are available only when Default and Servie1 ~ Servie6 an be seleted in Caption Mode. The Foreground and Bakground annot be set to have the same olor. Melody Set so that a melody plays when the TV is turned on or off. The Melody does not play. xwhen no sound is output from the TV beause the MUTE button has been pressed. xwhen no sound is output from the TV beause the volume has been redued to minimum with the VOL button. xwhen the TV is turned off by Sleep Timer funtion. Auto Protetion Time Auto Protetion Time (Off / 2 hours / 4 hours / 8 hours / 10 hours): If the sreen remains idle with a still image for a ertain period of time defined by the user, the sreen saver is ativated to prevent the formation of ghost images on the sreen.

9 Eo Solution Energy Saving (Off / Low / Medium / High / Piture Off) : This adjust the brightness of the TV in order to redue power onsumption. If you selet Piture Off, the sreen is turned off, but the sound remains on. Press any button exept volume button to turn on the sreen. Eo Sensor (Off / On) for LED 5000 series : To enhane your power savings; the piture settings will automatially adapt to the light in the room. If you adjust the Baklight, the Eo Sensor will be set to Off. Min. Baklight: When Eo Sensor is On, the minimum sreen brightness an be adjusted manually. If Eo Sensor is On, the display brightness may hange (beome slightly darker in most ases) depending on the surrounding light intensity. No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets how quikly the TV swithes to standby mode, if no piture is being reeived. Disabled when the PC is in power saving mode. Auto Power Off (Off / On): The TV will be automatially turned off when no user operation is reeived for 4 hours. Support Menu Self Diagnosis Piture Test: Use to hek for piture problems. If the problem ontinues to our, hek the olor pattern. Sound Test: Use the built-in melody sound to hek for sound problems. Signal Strength: (digital hannels only) An HD hannel s reeption quality is either perfet or the hannels are unavailable. Adjust your antenna to inrease signal strength. Reset: Reset all settings to the fatory defaults. The PIN input sreen appears before the setup sreen. Enter your 4-digit PIN. Change the PIN using the Change PIN option. Software Upgrade Software Upgrade an be performed by downloading the latest firmware from samsung.om to a USB memory devie. HD Connetion Guide Refer to this information when onneting external devies to the TV. Contat Samsung View this information when your TV does not work properly or when you want to upgrade the software. You an find information regarding our all enters and how to download produts and software. Media Play Enjoy photos, musi and/or movie files saved on a USB Mass Storage Class (MSC) devie. MEDIA.P Conneting a USB Devie 1. Turn on your TV. 2. Connet a USB devie ontaining photo, musi and/or movie files to the USB jak on the side of the TV. 3. When USB is onneted to the TV, you an selet Media Play (USB) in Appliation menu. Using the Media Play Menu Media Play Videos SUM Change Devie E Enter R Return 1. Press the MENU button. Press the or button to selet Appliation, then press the ENTERE button. 2. Press the or button to selet Media Play (USB), then press the ENTERE button. 3. Press the or button to selet an ion (Videos, Musi, Photos, Settings), then press the ENTERE button. It might not work properly with unliensed multimedia files. Need-to-Know List before using Media Play (USB) xthe file system supports FAT16, FAT32 and NTFS. xcertain types of USB Digital amera and audio devies may not be ompatible with this TV. xmedia Play only supports USB Mass Storage Class (MSC) devies. MSC is a Mass Storage Class Bulk-Only Transport devie. Examples of MSC are Thumb drives and Flash Card Readers. Devies should be onneted diretly to the TV s USB port. USB HDD is not supported. xbefore onneting your devie to the TV, please bak up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. xa USB devie that requires high power (more than 0.5A) may not be supported. xdo not disonnet the USB devie while it is loading. xthe higher the resolution of the image, the longer it takes to display on the sreen. xthe maximum supported JPEG resolution is x 8640 pixels. xif a file is orrupted or the TV does not support the file type, the Not Supported File Format message appears. xthe TV annot play MP3 files with DRM that have been downloaded from a for-pay site. Digital Rights Management (DRM) is a tehnology that supports the reation, distribution, and management of digital ontent in an integrated and omprehensive way, inluding proteting the rights and interests of ontent providers, preventing illegal opying of ontents, and managing billings and settlements

10 xptp devie is not supported. x If an over-power warning message is displayed while you are onneting or using a USB devie, the devie may not be reognized or may malfuntion. xif the TV has no input during the time set in Auto Protetion Time, the Sreensaver will run. xthe power-saving mode of some external hard disk drives may be released automatially when your onnet them to the TV. xif you use a USB extension able, the TV may not reognize the USB devie or may not be able to read the files on the devie. xif a USB devie onneted to the TV is not reognized, the list of files on the devie is orrupted, or a file in the list is not played, onnet the USB devie to a PC, format the devie, and hek the onnetion. xif a file you deleted from the PC is still found when you run Media Play, use the Empty the Reyle Bin funtion on the PC to permanently delete the file. xphotos only supports sequential jpeg format. xthe sene searh and thumbnail funtions are not supported in the Videos. xif the number of files and folders saved on a USB storage devie is approximately over 4000, the files and folders may not appear and some folders may not be opened. xthe maximum displayed number of files, inluding sub folders, in one folder of USB storage devie is xthe media may not be playing smoothly when using the devie lower than USB 2.0. Videos Movie 01.avi 00:04:03 / 00:07:38 E Pause L Jump T Tools R Return 1. Press the or button to selet Videos, then press the ENTERE button in the Media Play menu. 2. Press the / / / button to selet the desired video in the file list. 3. Press the ENTERE button or (Play) button. -- The seleted file is displayed on the top with its playing time. -- If video time information is unknown, playing time and the progress bar are not displayed. -- During video playbak, you an searh using the and button. In this mode, you an play movie lips ontained in a game, but you annot play the game itself. ysupported Subtitle Formats -- External Name MPEG-4 timed text SAMI SubRip SubViewer Miro DVD SubStation Alpha Advaned SubStation Alpha 1/1 File extension.ttxt.smi.srt.sub.sub or.txt.ssa.ass -- Internal Name Container Format Xsub AVI Piture Format SubStation Alpha MKV Text Format Advaned SubStation Alpha MKV Text Format SubRip MKV Text Format MPEG-4 Timed text MP4 Text Format ysupported Video Formats File Extension *.mp4 *.avi *.mkv *.asf *.wmv *.ts *.trp *.tp *.m2ts *.dat *.mpg *.mpeg *.vob *.3gp *.flv *.swf Container Video Code Resolution MP4 AVI, MKV ASF TS PS 3GPP flash formats Other Restritions DivX 3.11/4.x/5.1/6.0 Frame rate(fps) Bit rate(mbps) 1920x1080 6~30 30Mbps H x1080 6~30 30Mbps AVC 1920x1080 6~30 30Mbps MJPEG 640x480 6~30 10Mbps DivX 3.11/4.x/5.1/ x1080 6~30 30Mbps MPEG4 SP / ASP 1920x1080 6~30 30Mbps H x1080 6~30 30Mbps MJPEG 640x480 6~30 10Mbps DivX 3.11 / 4.x /5.1 / x1080 6~30 30Mbps MPEG4 SP / ASP 1920x1080 6~30 30Mbps H x1080 6~30 30Mbps MPEG2 1920x1080 6~30 30Mbps H. 264 BP / MP / HP 1920x1080 6~30 30Mbps Audio Code MP3 / ADPCM / AAC MP3 / AC3 / LPCM / ADPCM / DTS Core MP3 / AC3 / LPCM / ADPCM / WMA / WMA Pro AC3 / AAC / MP3 / DD+ / HE-AAC MPEG1 1920x /25/30 30Mbps AC3 / MPEG2 1920x /25/30 30Mbps MPEG / LPCM / H. 264 BP / MP 1920x1080 6~30 30Mbps AAC / HP MPEG4 SP / ASP 1920x1080 6~30 30Mbps H x1080 6~30 30Mbps H x1080 6~30 30Mbps Sorenson H x1080 6~30 30Mbps yvideo ontent will not play, or not play orretly, if there is an error in the ontent or the ontainer. ysound or video may not work if the ontents have a standard bit rate/ frame rate above the ompatible Frame/se listed in the table above. yif the Index Table is in error, the Seek (Jump) funtion is not supported. ythe menu may take longer to appear if the video s bit rate exeeds 10Mbps. yvideo ontent an not be played, if there are many ontents in one file. Video Deoder Supports up to H.264, Level 4.1 H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported. MPEG4 SP, ASP : Below 1280 x 720: 60 frame max Above 1280 x 720: 30 frame max H.263 is not supported. GMC is not support. Audio Deoder Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO WMA 9 PRO and WMA 10 PRO support 5.1 hannel. (LBR mode of WMA Pro is not supported) WMA Lossless is not supported. MP3 MP3-10 -

11 Musi SUM I Love You Jhon 1st Album Pop MB 01:10 / 04:02 I Love you Jhon Musi 1 No Singer Musi 2 No Singer Musi 3 No Singer Musi 4 No Singer Musi 5 No Singer Playlist 3/15 E Pause L Jump T Tools R Return 1. Press the or button to selet Musi, then press the ENTERE button in the Media Play menu. 2. Press the / / / button to selet the desired Musi in the file list. 3. Press the ENTERE button or (Play) button. During musi playbak, you an searh using the and button. (REW) and μ (FF) buttons do not funtion during play. Only displays the files with MP3 and PCM file extension. Other file extensions are not displayed, even if they are saved on the same USB devie. If the sound is abnormal when playing MP3 files, adjust the Equalizer in the Sound menu. (An over-modulated MP3 file may ause a sound problem.) Photos Normal Image1024.jpg 1024x /10/24 3/15 E Pause L Previous/Next T Tools R Return 1. Press the or button to selet Photos, then press the ENTERE button in the Media Play menu. 2. Press the / / / button to selet the desired photo in the file list. 3. Press the ENTERE button or (Play) button. NOTE xwhile a photo list is displayed, press the (Play) / ENTERE button on the remote ontrol to start the slide show. xall files in the file list setion will be displayed in the slide show. xduring the slide show, files are displayed in order. xduring the slide show, you an adjust the slide show speed using (π) (REW) or (µ) (FF) button. xyou an move to other file using or button. ysupported Photo Formats Image Photo Resolution JPEG Base-line x 8704 Progressive 1024 x 768 Other Restritions ycmyk, YCCK Color spae JPEG are not supported. Playing Multiple Files Playing seleted video/musi/photo files 1. Press the Yellow button in the file list to selet the desired file. 2. Repeat the above operation to selet multiple files. NOTE xthe mark appears to the left of the seleted files. xto anel a seletion, press the Yellow button again. xto deselet all seleted files, press the TOOLS button and selet Deselet All. 3. Press the TOOLS button, and then selet Play Seleted Contents. Playing the video/musi/photo file group 1. While a file list is displayed, move to any file in desired group. 2. Press the TOOLS button, and then selet Play Folder. Media Play - Additional Funtions Videos/Musi/Photos Play Option menus When playing a file, press the TOOLS button. Category Operation Videos Musi Photos Title You an move the other file diretly. Repeat Mode Piture Size You an play movie and musi files repeatedly. You an adjust the piture size to your preferene. Piture Mode You an adjust the piture setting. Sound Mode You an adjust the sound setting. Subtile Setting Audio Format Audio Language Stop Slide Show / Start Slide Show Slide Show Speed Bakground Musi Zoom Rotate Information Settings Using the Setup Menu You an play the video with Subtitles. This funtion only works if the subtitles are the same file name as the video. You an selet the digital audio output format. You an hange the audio language if the video has more than one language. You an start or stop a Slide Show. You an selet the slide show speed during the slide show. You an set and selet bakground musi when wathing a Slide Show. You an zoom into images in full sreen mode. You an rotate images in full sreen mode. You an see detailed information about the played file. DivX Video On Demand : Shows the registration ode authorized for the TV. If you onnet to the DivX web site and register with 10-digit registration ode, you an download the VOD ativation file. One you play it using Media Play, the registration is ompleted. For more information on DivX VOD, visit om. Information: Selet to view information on the onneted devie

12 Other Information Installing the Wall Mount Kit The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instrutions provided with the wall mount items. Contat a tehniian for assistane when installing the wall mount braket. Samsung Eletronis is not responsible for any damage to the produt or injury to yourself or others if you elet to install the wall mount on your own. Wall Mount Kit Speifiations (VESA) The wall mount kit is not supplied, but sold separately. Install your wall mount on a solid wall perpendiular to the floor. When attahing to other building materials, please ontat your nearest dealer. If you install the TV on a eiling or slanted wall, it may fall and result in severe personal injury. NOTE xstandard dimensions for wall mount kits are shown in the table below. xwhen purhasing our wall mount kit, a detailed installation manual and all parts neessary for assembly are provided. xdo not use srews that do not omply with the VESA standard srew speifiations. xdo not use srews that are longer than the standard dimension or do not omply with the VESA standard srew speifiations. Srews that are too long may ause damage to the inside of the TV set. xfor wall mounts that do not omply with the VESA standard srew speifiations, the length of the srews may differ depending on the wall mount speifiations. xdo not fasten the srews too firmly. This may damage the produt or ause the produt to fall, leading to personal injury. Samsung is not liable for these kinds of aidents. xsamsung is not liable for produt damage or personal injury when a non-vesa or non-speified wall mount is used or the onsumer fails to follow the produt installation instrutions. xdo not mount the TV at more than a 15 degree tilt. xalways have two people mount the TV on a wall. Seuring the TV to the Wall Caution: Pulling, pushing, or limbing onto the TV may ause the TV to fall. In partiular, ensure that your hildren do not hang over or destabilize the TV; doing so may ause the TV to tip over, resulting in serious injuries or death. Follow all safety preautions provided on the inluded Safety Flyer. For added stability, install the anti-fall devie for safety purposes, as follows. To prevent the TV from falling Sine the neessary lamps, srews, and string are not supplied, please purhase these additionally. 1. Drive the srews into the lamps and firmly fasten them onto the wall. Make sure the srews are firmly fixed into the wall. 2. Remove the srews from the bak enter of the TV, put the srews into the lamps, and then fasten the srews onto the TV again. 3. Connet the lamps fixed onto the TV and the lamps fixed onto the wall with a strong able and then tie the string tightly. Verify all onnetions are properly seured. Periodially hek the onnetions for any sign of fatigue or failure. If you have any doubt about the seurity of your onnetions, ontat a professional installer. Install the TV lose to the wall so that it does not fall. It is safe to onnet the string so that the lamps fixed on the wall are equal to or lower than the lamps fixed on the TV. Untie the string before moving the TV. Kensington Lok The Kensington Lok is not supplied by Samsung. It is a devie used to physially fix the system when using it in a publi plae. Refer to the manual provided with the Kensington Lok for additional information on proper use. Please find a K ion on the rear of the TV. The Kensington slot is beside the K ion. The position and olor may differ depending on the model. Assembling the Wire Holder stand Produt Family LED-TV TV size in inhes VESA srew hole spes (A * B) in millimeters 19~22 75 X X 100 Standard Srew M4 32~ X 200 M6 46~ X 400 M8 Quantity 4 Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to eletri shok

13 Troubleshooting If the TV seems to have a problem, first review this list of possible problems and solution. If none of these troubleshooting tips apply, visit samsung.om, then lik on Support, or all Samsung ustomer servie. Problem Flikering and Dimming Component Connetions / Sreen Color Sreen Brightness Unwanted Powering off Trouble Powering On Stand Assembly Cannot find hannel Poor piture The TV image does not look as good as it did in the store. The piture is distorted: maroblok error, small blok, dots, pixelization. Color is wrong or missing. Possible Solution If your Samsung Television is flikering or dimming sporadially, you may need to disable some of its energy effiient features like the Eo Sensor or the Energy Saving feature. If you follow below step with your remote, you an turn these features off or on. y Energy saving : User Menu Setup Eo Solution Energy Saving y Eo Sensor : User Menu Setup Eo Solution Eo Sensor If you find that the olor on your Samsung television s sreen is not orret or blak and White, first run a Self Diagnosis on the TV to make sure there are no devie issues. y Self Diagnosis : User Menu Support Self Diagnosis Piture Test y If the test is ok, try making sure ; y Your onnetions are all onsistent. For example, if you ve used the AV In jak on your TV, make sure you have used the AV Out jak on your video soure. y Try making sure you have onneted to the orret jaks. For example, if you use the Component jaks, labeled Pb, Pr, and Y, to onnet your TV and video soure, make sure you have onneted the blue Pb jak on the video soure to the blue Pb jak on the TV, the red Pr jak on the soure to the red Pr jak on the TV. If you find that the olors on your Samsung TV are orret but just a little too dark or bright, there are some settings you should hek before alling for a repair. y Baklight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go in to Piture on user Menu then try adjusting options mentioned above. If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eo friendly No Signal Power Off feature. First make sure you Sleep Timer is not aidentally set. The sleep timer allows you the omfort of falling asleep with the TV still on but, turns it off after a ertain period of time so as not to waste energy. y Sleep Timer : User Menu Setup Time Sleep Timer If the Sleep Timer is not ativated, you may have engaged the No Signal Power Off or Auto Power Off feature. y No Signal Power Off : User Menu Setup Eo Solution No Signal Power y Auto Power Off : User Menu Setup Eo Solution Auto Power Off Before Turn on hek red light on the right or left bottom of your TV. Press power on button on TV or remote and it will blink about 5 times before turning on. If you find that you are having trouble powering on your Samsung television, there are a number of things to hek before making a all to the servie department. y If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seonds when you press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your keyboard or move the mouse. Then try turning your TV on. If you re sure your power ord, remote ontrol, and PC are funtioning properly, you may be having a able issue. If you have a able or satellite box, your TV may appear to be off beause the able or satellite box is not outputting a signal. To test the signal output of your able or satellite box, press the guide or info button on the able or satellite box remote ontrol. If the sreen displays the guide or info data, the problem is aused by the box. If you have any trouble to assemble the stand though you refer to Install the Stand mentioned at separate guide. Re-run plug and play. First, perform the Piture Test and to see if your TV is properly displaying the test image. Go to MENU - Support - Self Diagnosis - Piture Test If the test image is properly displayed, the poor piture may be aused by the soure or signal. If you have an analog able/satellite box, upgrade to a digital set top box. Use HDMI or Component ables to deliver HD (high definition) piture quality. Cable/Satellite subsribers: Try HD hannels from the hannel line up. Air/Cable Antenna onnetion: Try HD hannels after performing Auto program. Many HD hannels are up saled from SD(Standard Definition) ontents. Adjust the Cable/Set top box video output resolution to 1080i or 720p. Compression of video ontents may ause piture distortion, espeially on fast moving pitures suh as sports and ation movies. A weak signal an ause piture distortion. This is not a TV problem. Mobile phones used lose to the TV (within 3.3ft) may ause noise in the piture on analog and digital hannels. If you re using a omponent onnetion, make sure the omponent ables are onneted to the orret jaks. Inorret or loose onnetions may ause olor problems or a blank sreen